Filter Jobs

Experience:

8 years required

Skills:

Statistical Analysis, Product Development, Project Management, Risk Management, Enthusiastic

Job type:

Full-time

• Serve as the Supplier Quality Engineer for Lumentum's Optical Components.
• Own the supplier quality strategy supporting the optical commodity technology roadmap across multiple Business Units.
• Provide supplier quality leadership throughout the complete product lifecycle, from technology development through sustaining production.
• Partner with Product Engineering, Component Engineering, and Commodity Management to influence supplier selection, manufacturing strategy, technology roadmaps, and supplier capability development.
• Support multiple concurrent NPI programs while balancing business priorities, supplier readiness, and manufacturing capacity.
• Supplier Quality & Supplier Development.
• Lead supplier qualification, manufacturing capability assessments, process audits, and supplier readiness evaluations for strategic optical component suppliers.
• Evaluate supplier manufacturing maturity, process capability, capacity, scalability, and operational excellence across diverse optical manufacturing technologies.
• Develop supplier improvement roadmaps focused on quality, yield, process capability, manufacturing robustness, and operational excellence.
• Identify supplier risks and develop mitigation strategies supporting business continuity, supply resiliency, and product quality.
• Drive Lean Manufacturing, Six Sigma, and continuous improvement initiatives with strategic suppliers.
• New Product Introduction (NPI).
• Partner with Product Development, Component Engineering, Manufacturing Engineering, and Program Management to ensure supplier readiness for new product introductions.
• Participate in Design Reviews, Design for Manufacturability (DFM), and Design for Excellence (DFX) activities with Engineering teams and suppliers.
• Lead supplier process qualification, First Article Inspection (FAI), process validation, and production readiness activities.
• Support production ramp, supplier transfers, manufacturing transfers, localization initiatives, and capacity expansion projects.
• Ensure suppliers consistently meet quality, reliability, manufacturability, and delivery requirements prior to production release.
• Engineering & Technical Leadership.
• Act as the primary technical quality interface between Lumentum and strategic optical component suppliers.
• Influence engineering and supplier decisions without direct authority through technical expertise and data-driven decision making.
• Lead supplier technical reviews, quality reviews, executive escalations, and corrective action activities.
• Drive supplier capability development across advanced optical manufacturing technologies, precision assembly processes, and automated manufacturing systems.
• Support Engineering organizations with supplier manufacturing expertise during technology development, product industrialization, and manufacturing transfers.
• Cross-Functional Collaboration.
• Work closely with Product Engineering, Component Engineering, Commodity Management, Global Sourcing, Manufacturing, Reliability Engineering, Operations, Program Management, and Customer Quality.
• Support supplier changes, value engineering initiatives, localization programs, and manufacturing optimization projects.
• Utilize supplier quality metrics, statistical analysis, and manufacturing data to improve supplier capability and product quality.
• Drive proactive supplier risk management, manufacturing readiness, and long-term supplier development throughout the product lifecycle.
• Required.
• Bachelor's degree in Optical Engineering, Physics, Materials Science, or a related engineering discipline.
• Minimum 8 years of experience in Supplier Quality Engineering, Manufacturing Quality, Product Quality, or Quality Engineering within a high-technology manufacturing environment.
• Technical understanding of optical component manufacturing technologies, including fiber optics, passive optical components, precision optics, optical assemblies, and photonic devices.
• Experience with optical manufacturing processes such as active alignment, passive alignment, laser welding, adhesive bonding, fiber polishing, precision machining, ceramic manufacturing, and optical metrology.
• Experience supporting supplier qualification, process validation, New Product Introduction (NPI), manufacturing transfer, and production ramp activities.
• Knowledge of supplier quality systems, statistical process control, process capability analysis, FMEA, Control Plans, Measurement System Analysis (MSA), and structured problem-solving methodologies.
• Excellent communication, organizational, project management, and leadership skills.
• Demonstrated ability to influence cross-functional technical decisions across engineering, manufacturing, sourcing, and supplier organizations.
• Willingness to travel domestically and internationally (approximately 20-30%).
• Why Join Lumentum?.
• At Lumentum, Supplier Quality Engineering is evolving into a strategic engineering organization that partners closely with Product Engineering, Component Engineering, and our global supply base to enable innovation and business growth.
• As the SQE for Optical Components, you will help shape supplier technology roadmaps, influence supplier selection, accelerate new product introductions, and develop the manufacturing capabilities required to deliver the next generation of AI networking, coherent optics, and advanced photonic solutions. Your work will directly impact the performance, scalability, reliability, and supply resilience of the technologies powering the world's most advanced communications infrastructure.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Experience:

5 years required

Skills:

Quality Assurance, Risk Management, Enthusiastic, Leadership Skill, Assurance

Job type:

Full-time

• Lead and manage a global team of Supplier Quality Engineers located across multiple sites.
• Establish organizational priorities, performance objectives, and development plans while fostering a culture of accountability, collaboration, and continuous improvement.
• Drive consistent implementation of global supplier quality standards and best practices.
• Supplier Quality & Commodity Management.
• Own the Supplier Quality strategy for Optical Commodities across all Lumentum business units.
• Ensure robust supplier qualification, performance monitoring, risk management, and continuous improvement programs.
• Incoming Quality Assurance (IQA).
• Provide leadership for Incoming Quality Assurance activities across manufacturing sites.
• Ensure effective incoming inspection processes that balance product quality, manufacturing efficiency, and supplier performance.
• Utilize quality data and supplier performance metrics to optimize inspection strategies and drive continuous improvement.
• Supplier Relationship Management.
• Serve as the primary quality representative for optical suppliers.
• Lead supplier communications, quality escalations, and executive-level engagements.
• Develop collaborative supplier partnerships focused on improving quality, reliability, delivery performance, and operational excellence.
• Cross-Functional Collaboration.
• Partner with Engineering, Manufacturing, Operations, Program Management, Supply Chain, Reliability, and Customer Quality to ensure supplier readiness and successful product execution.
• Support business growth by proactively identifying supplier risks and implementing effective mitigation strategies.
• Required.
• Bachelor's degree in Optical Engineering, Physics, Materials Science, or a related technical discipline.
• 10+ years of experience in Supplier Quality, Quality Engineering, or Manufacturing Quality within a high-technology manufacturing environment.
• Minimum 5 years of leadership experience managing engineering or quality organizations.
• Strong technical knowledge of optical components, photonics, fiber optics, lasers, or related optical technologies.
• Experience managing geographically distributed teams.
• Proven experience leading supplier quality initiatives and supplier development programs.
• Excellent communication and stakeholder management skills with experience working directly with strategic suppliers and executive leadership.
• Preferred.
• Master's degree in Engineering or related discipline.
• Experience supporting multiple product lines within a global manufacturing organization.
• Knowledge of semiconductor, photonics, precision optics, and advanced packaging manufacturing processes.
• Why Join Lumentum?.
• This is a highly visible leadership opportunity to shape the global quality strategy for one of Lumentum's most critical commodity areas. The role provides broad exposure across all Business Units while leading a global organization responsible for Supplier Quality Engineering, Incoming Quality Assurance, and strategic supplier engagement. The successful candidate will play a.
• key role.
• in developing talent, strengthening supplier partnerships, and driving quality excellence across Lumentum's worldwide supply chain.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Experience:

8 years required

Skills:

Risk Management, Assurance, English, Thai

Job type:

Full-time

• Ensure safety communication is clear, timely, and contextual.
• Improve effectiveness of toolbox talks and safety briefings.
• Develop own competences as a safety specialist in co-operation with the manager.
• Support the training and development of others' safety competences in the Country.
• Proactively communicate safety information including investigation outcomes and best practices.
• Quality and Environment.
• Assist line management in Quality and Environment for the process improvement.
• Are you the one?.
• Bachelor degree in Occupational Health and Safety (OHS) or related disciplines 5-8 years of working experience in safety Excellent communication in Thai. English is an asset Strong people and interpersonal skills Experience from manufacturing and/or construction industry is prefered.
• What do we offer?.
• Career progression in opportunities within a global organization.
• Total reward elements that engage and motivate our employees and help us make KONE a great place to work.
• Comprehensive learning and development programs covering a wide range of professional skills.
• You are surrounded by fun colleagues and a lively working environment. The best part is all leaders are great and open-minded.

Experience:

1 year required

Skills:

Event Planning, English

Job type:

Full-time

• Curate and serve premium hot and cold beverages, signature cocktails, artisanal spirits, and wine pairings for residents and their guests in private lounges or residential suites.
• Demonstrate deep knowledge of mixology, wine varietals, food pairings, and luxury table settings to elevate private gatherings and daily service.
• Prepare light gourmet refreshments and manage seamless food service for private resident events, meetings, and exclusive social functions.
• Provide tailor-made lifestyle assistance based on resident requests, including personal shopping support for luxury fashion, fine jewelry, and high-end brands.
• Coordinate the secure receiving, white-glove delivery, and proper handling of luxury purchases, fine art, designer goods, and delicate personal parcels directly to residents' units.
• Assist in managing special lifestyle arrangements, local transport, private bookings, and personal errands with the utmost attention to detail.
• Deliver personalized, discreet butler services tailored to the unique preferences and lifestyle requirements of high-net-worth residents.
• Assist residents with private event planning, lounge reservations, table setup, and catering coordination.
• Maintain the highest standards of presentation, cleanliness, and order across executive lounges, private dining rooms, and amenity spaces.
• Manage inventory for luxury beverages, fine wines, spirits, glassware, and service amenities; conduct regular stock checks and ensure optimal storage conditions.
• Coordinate with high-end suppliers, personal shoppers, caterers, and luxury vendors to fulfill specialized resident requests.
• Minimum 3-5 years of experience in Food & Beverage, Sommelier services, Mixology, or Butler operations within 5-star luxury hotels, high-end fine dining restaurants, or ultra-luxury private residences.
• Food & Beverage Mastery: Solid knowledge of international beverage culture, classic and contemporary cocktail mixology, barista skills, and fine wine appreciation (WSET qualification or sommelier background is a strong advantage).
• Lifestyle Concierge & Service: Familiarity with high-end luxury brands, luxury shopping services, and white-glove parcel delivery protocols.
• White-Glove Hospitality: Deep understanding of formal dining etiquette, service standards, and luxury table presentation.
• Impeccable personal grooming, refined posture, and an approachable, charismatic personality suited for an elite clientele.
• High emotional intelligence, discretion, and strict adherence to resident confidentiality.
• Excellent command of spoken and written English to communicate fluently with international residents and VIP guests.

Experience:

3 years required

Skills:

Enthusiastic, Electronics, ERP

Job type:

Full-time

• We're committed to bringing passion and customer focus to the business.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!.
• We are looking for a strong, people-focused, and detail-oriented.
• Production Supervisor.
• to lead frontline manufacturing operations in Lumentum's high-precision global production environment. This role is responsible for managing daily production activities, ensuring output targets are achieved, maintaining quality and safety standards, and developing operators to perform at high levels. The Production Supervisor works closely with Manufacturing Engineering, Quality, Planning, and Warehouse teams to ensure smooth production flow, resolve operational issues, and support continuous improvement. This position may require managing.
• rotating shifts.
• based on operational needs.
• Lead and supervise production operators to ensure daily output, quality, and schedule adherence goals are achieved.
• Plan and allocate manpower by shift, ensuring optimal coverage for all production stations and equipment.
• Monitor production WIP, line performance, cycle time, and bottlenecks; drive actions to meet production and customer targets.
• Ensure strict compliance with SOPs, process controls, ESD, safety, and cleanroom standards during all production activities.
• Collaborate with Process Engineering (PE), Quality Engineering (QE), and Equipment teams to resolve production issues, process deviations, or equipment downtime.
• Support NPI and engineering builds by coordinating manpower, training operators, and ensuring process readiness.
• Conduct real-time line audits, quality checks, and operator performance observations to prevent quality escapes.
• Provide coaching, training, and skill development for operators to improve competency, productivity, and flexibility.
• Maintain shift documentation including production reports, attendance, incident logs, and abnormality reports.
• Drive 5S, Kaizen, cost reduction, and continuous improvement initiatives in the production area.
• Ensure proper material, tooling, and fixture readiness by coordinating with Warehouse, Planning, and Engineering teams.
• Participate in daily/weekly production meetings and communicate shift performance, issues, and recovery plans.
• Escalate critical issues promptly and coordinate corrective actions to minimize production impact.
• Perform additional responsibilities or tasks assigned by the Manager.
• Bachelor's degree in Engineering, Industrial Technology, Manufacturing, Science, or a related field (Diploma/Vocational + strong experience may also be considered).
• 3-8 years of experience in high-tech, electronics, semiconductor, optical, or precision manufacturing.
• Minimum 2+ years in a leadership or supervisory role managing production teams.
• Strong understanding of manufacturing processes, WIP control, quality standards, and production metrics.
• Experience working in cleanroom, optical, or high-precision environments is an advantage.
• Strong leadership, communication, and coaching skills with the ability to guide and motivate teams.
• Ability to work.
• rotating shifts.
• and support fast-paced, high-volume production environments.
• Problem-solving mindset with the ability to analyze issues, drive root cause containment, and implement improvements.
• Proficiency in basic computer applications (Excel, Word, ERP systems).
• Commitment to safety, quality, and continuous improvement.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Experience:

2 years required

Skills:

Statistical Analysis, Problem Solving, ISO 9001, English, Laos

Job type:

Full-time

• Quality and Customers.
• Lead Customer Connection Program with plants: Customer BSC, customer visits, Customer.
• Education, action plan on improvements as outcomes of customer satisfaction surveys.
• Ensure compliance with Mass prod Quality Referential.
• Work with Plant Quality Managers on Customer Issues Resolution: Structured 8D approach, animate effective exchange among the plants on lessons learned.
• Monitor process capability of the plants and facilitate support and action plan building on improvement based around BSC performance.
• Set in place process quality audits, work with plants to report issues, alert on non-conformance and support improvement action plans to get back to standard on Key KPI's.
• Monitor and report the product and process performance, actively follow the action plans on improvement.
• Support alignment between Mass prod plants and Rx labs.
• Develop a continuous improvement mindset, propose and work with engineering/sites improvement ideas.
• Interactions.
• Work closely together with quality managers on key topics in the plant and support product and process quality guarantee.
• Work with customers and support plants during quality issues needing regional coordination.
• Animate activities among QA Managers, Quality Experts, NPI Coordinators, WW Manufacturing Quality, SC, GE, Market Quality, and QMS teams and participate in manufacturing projects.
• Must have.
• Bachelor or Master's Degree in engineering or related field.
• Minimum 2 years' experience in a manufacturing environment.
• Hands-on and pro-active approach.
• Ability to work in a fast-paced environment.
• Proficient with MS Office programs (especially MS Excel, MS Powerpoint etc.).
• Excellent written and spoken English.
• 10-20% of time travelling.
• Technical Knowledge of Product and Process.
• Strong on analytical skills, problem solving.
• Technical knowledge on Quality systems, process control, Statistical analysis, Group QMS, ISO 13485.
• Specification (product & process) validation to product requirements (safety, regulation, claim, consumer benefit and satisfaction).
• Knowledge of Quality tools & methodologies (concept analysis, risk assessment.).
• Experience in mass production but no hands-on training given as needed.
• QMS ISO 13485 and/or ISO 9001 an advantage.

Experience:

2 years required

Skills:

Project Management, Microsoft Office, Packaging Design, YouTube, English

Job type:

Full-time

• Lead/coordinate with part supplier for packaging design for both new model and current model.
• Perform Packaging engineer routine jobs such as input/recheck parameter in system, validate Packaging design (from supplier) base on NISSAN standard including testing/evaluation.
• Initiate Packaging improvement activity to meet customer's requirements (support Oversea plant Tdc).
• Create work instruction or skills training related to packing operations.
• Collaborate and work cross-functional with related functions including global functions to enhance packaging cost competitive and other challenge such as CARBON neutral.
• Provide data/assumptions and calculate logistics cost for project feasibility study.
• Bachelor's degree in Engineering, Supply Chain and Logistics Management or related field.
• 2-3 years experience in packaging design/ packing operation.
• Have experience to implement project or have project management skills is preferable.
• Good skills in Microsoft Office (Excel, PowerPoint).
• Can handle muti-tasks in very limited timeline and enjoy working as a team (even under pressure).
• Strong communication, prioritization and time management skill.
• Collaborative mindset with the ability to work cross-cultural and work in different time zone.
• Logical thinking and have strong analytical skills.
• Fast learner with positive mindset & continuous self-challenge.
• Fluent in English: Listening, Reading and Writing skills.
• Work Location: NMT-ILN-LCB (W/H at Leamchabang, Sriracha, Chonburi) & NMT-SCM office plant#2.
• Have driving license (can go to supplier in Chonburi, Samutprakarn, Rayong herself/himself).
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand.

Experience:

5 years required

Skills:

Enthusiastic, Oracle, English

Job type:

Full-time

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Reporting to Manager to drive RMA with all cross functions start from receiving the RMA till ship back to customer and ensure the RMA is closed properly.
• Work closely with internal team on requirement for RMA orders to plan, schedule and completion of RMAs.
• Create RMA 8D report in Agile, providing all requested information to FA owner and monitor RMA processing within internal team.
• Update RMA schedule and status in Oracle on target completion date, tracking information for customer and internal communication.
• Schedule RMA sales order in Oracle and communicate with CSP and other related function to resolve any issues concerning the requirement.
• Updates databases and prepares appropriate paperwork.
• Escalation of issues to ensure RMA's keep moving forward and do not halt for long periods.
• Focal point for ensuring that all RMAs are tracked, providing status updates, following through to timely to meet customer expectation and satisfaction.
• Required Qualification.
• Bachelor's Degree in any related field.
• Minimum 5 years of experience in electronic or optical manufacturing environment preferred.
• Strong collaboration with cross functional team.
• Good command in English communication reading, writing, and speaking.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

Experience:

2 years required

Skills:

Microsoft Office, Enthusiastic, English

Job type:

Full-time

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• EHS Coordinator.
• Lumentum (NASDAQ: LITE) is a market-leading manufacturer of innovative optical and photonic products enabling optical networking and commercial laser customers worldwide. Lumentum's optical components and subsystems are part of virtually every type of telecom, enterprise, and data center network. Lumentum's commercial lasers enable advanced manufacturing techniques and diverse applications including next-generation 3D sensing capabilities. Lumentum is headquartered in Milpitas, California with R&D, manufacturing, and sales offices worldwide.
• For more information, visit www.lumentum.com.
• Lumentum is an Equal Opportunity Employer, EOE/Minorities/Females/Veterans/Disability.
• Work directly with Global EHS team to manage and support on EHS information update, database monitoring and tracking as below.
• Velocity: Chemical management platform.
• Work as system admin to monitor platform and support user request.
• Monitor new chemical registration and SDS.
• Workday: Training management platform.
• Work as system admin to upload training content into platform.
• Tracking EHS training record from each site and upload into platform.
• Generate training report for each site.
• Ideagen: Incident and audit management platform.
• Work as system admin to monitor platform and support user request.
• Generate incident and audit report for global team.
• To be point of contact between representative of each site and CB (Certified Body) for monitoring, planning, and working on ISO14001 and ISO45001 audit for each site. Provide document management, shared folder and intranet maintenance and support to Global Team. Support local team (Nava EHS) on below task.
• Support PR&PO process.
• Support EHS training tracking and update.
• Support PPE stock monitoring and tracking.
• Support Waste shipment process and document tracking.
• Support on emergency response drill.
• Other assignments from Global EHS and Nava EHS team.
• Bachelor's degree in any field. 2 - 3 years of experience in admin role. Good command of English in both oral and written communication skills Have experience and knowledge in management system standard e.g. ISO14001, ISO45001 (OHSAS18001) and EHS will be an advantage. Able to work independently and team environment. Flexibility to support company in urgent case. Have good communication skill and ability to handle multiple tasks with sense of urgency. Proficiency in computer skill e.g. Microsoft Office, email and etc. Experience with data visualization tools would be an asset.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

Experience:

3 years required

Skills:

Product Design

Job type:

Full-time

• Develop and implement strategic production plans, workflow structures, and resource allocation to maximize operational efficiency.
• Lead and manage daily production operations across coil manufacturing lines to achieve production targets.
• Oversee workforce planning, training programs, and performance evaluations to maintain a competent and motivated production team.
• Enforce rigorous quality control procedures to ensure compliance with company specifications and international standards.
• Control internal factory operations by reviewing and ensuring smooth workflow.
• Monitor production KPIs, conduct performance analysis, and compile detailed reports for senior management.
• Initiate and drive continuous improvement projects to reduce costs, enhance productivity, improve process stability, and minimize downtime.
• Perform other assigned duties.
• Bachelor's /Master's degree in Engineering, Industrial Technology, Production Management, or a related field.
• A minimum of 7-10 years of relevant manufacturing experience, with at least 5 years in a managerial capacity.
• Strong technical understanding of coil manufacturing, production processes, equipment operation, and quality management systems.
• Demonstrated leadership, problem-solving, and decision-making skills.
• Proficiency in Lean Manufacturing, Kaizen, Six Sigma, or similar continuous improvement methodologies.
• Excellent communication and interpersonal skills with the ability to collaborate effectively across departments.
• Experience in refrigeration systems will be considered a plus.
• Welfare.
• Provident fund.
• Cost of living.
• Uniforms.
• Lunch, Over-time allowance, food allowance.
• Shuttle bus.
• Dormitory.
• Diligence allowance.
• Annual health check-up.
• Company's annual party.
• Bonus.
• Contact.
• Ms. Panchit Fungpituk.
• Thai Ausnor Co., Ltd.
• 268 Rom Klao Road, Min Buri, Bangkok 10510.
• www.thaiausnor.com.
• Angthong Universal Co., Ltd.
• 519 Ramkhamhaeng Rd., Huamark, Bangkapi Bangkok 10240 Thailand.

Experience:

2 years required

Skills:

Risk Management, Enthusiastic, Assurance, English

Job type:

Full-time

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Security monitoring and alert triage.
• Monitor Security Information and Event Management (SIEM), Endpoint Detection and Response (EDR), anti-malware, email security, web security and cloud security alerts.
• Validate, triage and prioritise security events using agreed playbooks, business impact and risk context.
• Create accurate incident records, preserve relevant evidence and escalate incidents through the agreed incident management process.
• Support containment, eradication and recovery activities under the direction of the incident owner.
• Incident response and operational support.
• Follow documented incident response procedures for malware, phishing, account compromise, data exposure, suspicious network activity and lost or stolen devices.
• Assist with post-incident actions, including evidence capture, timeline building, lessons learned and remediation tracking.
• Maintain security operations knowledge base articles and playbooks for repeatable response tasks.
• Vulnerability and configuration management.
• Run or support scheduled vulnerability scanning across servers, endpoints, network devices, applications and cloud services.
• Validate scan findings, remove false positives where evidence supports this, assign remediation tickets and monitor progress against agreed service levels.
• Support secure configuration checks against approved baselines, including endpoint hardening, logging configuration and privileged account controls.
• Provide clear remediation guidance to infrastructure, application and service teams.
• Identity, access, Data Loss Prevention and Multi-Factor Authentication.
• Support identity and access management processes, including joiners, movers, leavers, privileged access reviews and evidence collection for access recertification.
• Monitor and investigate Data Loss Prevention (DLP) alerts, applying agreed classification, privacy and escalation rules.
• Support Multi-Factor Authentication (MFA) administration, user enrolment, exception handling, break-glass access checks and failed authentication investigations.
• Assist with user access investigations where suspected compromise, misuse or policy breach is identified.
• Security controls and tooling.
• Operate security tools in line with documented procedures and change controls.
• Support maintenance of alert rules, watchlists, endpoint policies, email filtering rules and data protection controls under approved guidance.
• Record control issues, service defects and improvement opportunities.
• Carry out routine security checks for backup alerts, logging gaps, certificate expiry, secure configuration and monitoring coverage.
• Policy, compliance and assurance support.
• Gather evidence for audits, risk assessments, supplier checks and compliance reviews.
• Apply relevant internal policies, standards and data handling requirements.
• Support regular checks against security standards, control requirements and business processes.
• Identify policy exceptions or control gaps and raise them through the agreed risk management process.
• Awareness and stakeholder support.
• Provide practical security advice to users and technical teams.
• Support phishing exercises, security awareness activities and targeted communications.
• Explain security requirements in a clear, proportionate and helpful way.
• Promote secure behaviours, including reporting suspicious activity, protecting credentials and handling sensitive data correctly.
• Reporting and documentation.
• Maintain accurate incident, alert, remediation and evidence records.
• Prepare routine operational reports on alerts, incidents, vulnerabilities, Data Loss Prevention (DLP), Multi-Factor Authentication (MFA), control exceptions and remediation progress.
• Contribute to dashboards and management information using agreed metrics.
• Keep procedures, playbooks and technical notes up to date.
• Bachelor Degree in Computer Science, Information Technology, Cybersecurity, or related fields.
• At least 1-2 years of experience in IT governance, IT audit, risk, or compliance.
• Experience in cybersecurity risk assessment, threat modeling, control testing, or security governance.
• Good command of spoken and written in English.
• Strong analytical and problem-solving skills.
• Good documentation and report-writing abilities.
• Attention to detail and organizational skills.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

Experience:

5 years required

Skills:

Financial Analysis, Microsoft Office, Enthusiastic, Accounting, Tableau, Oracle, SAP, ERP, English

Job type:

Full-time

• Full Product Cost Model Ownership.
• Independently prepare, maintain, and control complete Excel-based product cost models for approximately 5-10 product lines.
• Maintain a consistent model structure with clear assumptions, formulas, source references, and version history.
• Coordinate with data owners and actively follow up on incomplete or inconsistent information; do not rely on passive data collection.
• Ensure each model is complete, accurate, reviewed, and ready for the required business milestone or management review.
• NPI Costing and Gate Reviews.
• Prepare product cost models and cost roadmaps for NPI gate reviews.
• Analyze changes versus target, prior model versions, and approved assumptions; explain key drivers, risks, and opportunities.
• Partners with R&D, Manufacturing Engineering, GCM, and other teams to identify cost-improvement opportunities and quantify their financial impact.
• Mass-Production Cost Roadmaps.
• Prepare and maintain cost roadmaps for mass-production products.
• Update model assumptions and expected cost changes based on approved BOM, HPU, yield, and other relevant business inputs.
• Provide a clear view of current cost, expected future cost, timing, and remaining gaps to target.
• Cost Simulation and Scenario Analysis.
• Perform product cost simulations for BOM changes, HPU changes, yield improvement, and other approved scenarios.
• Compare alternatives and quantify the cost impact by product and product line to support management decisions.
• Actual Cost, Variance, and Savings Analysis.
• Analyze variance between actual product cost and the approved cost model or roadmap.
• Identify the main cost drivers and clearly explain whether the variance is caused by assumptions, timing, data, or execution gaps.
• Track cost-improvement initiatives and cost-saving realization; validate that reported savings are supported by actual results.
• FTA and Management Support.
• Prepare model, form and supporting analysis for Free Trade Agreement (FTA) applications.
• Provide management-ready summaries, recommendations, and ad hoc financial analysis as required.
• Manage priorities and deadlines across multiple product lines while maintaining accuracy and documentation quality.
• Expected Deliverables and Measures of Success.
• Complete, accurate, and on-time cost models for all assigned product lines.
• Clear and traceable assumptions, source data, formulas, model versions, and supporting documentation.
• Reliable cost roadmaps, scenario analyses, and variance bridges that management can use for decisions.
• Timely identification and communication of cost risks, opportunities, data gaps, and required actions.
• Demonstrated ownership: the analyst independently drives the model to completion rather than only collecting or compiling inputs.
• Bachelor's degree or above in Finance, Accounting, Business Administration, Economics, or a related field. An Engineering background is also acceptable; an MBA is a plus.
• At least 5 years of relevant working experience, including product cost accounting or product costing experience in a multinational manufacturing company. Experience with a U.S.-listed company is preferred.
• At least 3 years of hands-on product costing experience.
• Advanced Microsoft Excel modeling capability is essential. The role requires the ability to build, maintain, audit, and explain complex manually managed cost models, not only operate an automated costing system.
• Good knowledge of manufacturing processes and the ability to translate technical and operational inputs into financial cost impact.
• Proficiency in Oracle ERP; SAP experience is acceptable. Strong Microsoft Office skills are required, and Tableau experience is a plus.
• Ability to manage multiple priorities and deliverables across approximately 5-10 product lines.
• English proficiency sufficient to work effectively with global teams from diverse cultural backgrounds.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Experience:

1 year required

Skills:

Enthusiastic, Data Entry, Payroll, English, Thai

Job type:

Full-time

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Accurately enter new employee information into the Workday system.
• Collaborate closely with the recruiting team on the DL hiring plan and manage new hire gift inventory.
• Conduct new employee orientation sessions every Monday, updating presentation slides to align with global standards and translating content into Thai to meet ISO audit requirements.
• Assist with new employee onboarding processes, ensuring policy acknowledgments are signed and maintaining records in compliance with SOX requirements.
• Manage human resource personal information data within the Workday system for Thai employees, adhering to global restrictions.
• Maintain records of employee's personnel-related data (Personal information, provident fund, Insurance, etc.) in both paper and the database and ensure all employment requirements are met.
• Monitor and follow up on probation confirmations with line managers.
• Collaborate with the global HRIS team to identify and resolve Workday system issues.
• Maintain and update the HRC handbook and workflow for Thailand.
• Assist line managers and employees with offboarding processes.
• Provide relevant data for payroll preparation (bonuses, provident fund enrollment, etc.).
• Administer health and welfare plans, including enrollments, changes, and terminations.
• Provide ongoing support to HR operations and benefits teams.
• Generate and submit reports on general HR activities.
• Monitor HRConnections to promptly address employee inquiries and requests.
• Contribute to the development and implementation of HR initiatives and projects.
• Perform other duties as assigned.
• 2-4 years of relevant HR work experience. Good knowledge of general human resources practices, procedures, and benefit.
• Bachelor degree in related field or equivalent experience required.
• Experience with data entry into HR database required.
• Excellent MS Office Suite work experience, emphasis on Word, Excel, and PowerPoint.
• Ability to communicate in English both of written and spoken.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

Experience:

3 years required

Skills:

Accounting

Job type:

Full-time

• We are a global leader in the design, manufacture, and distribution of ophthalmic lenses, frames, and sunglasses. We offer our industry stakeholders in over.
• 150 countries.
• access to a global platform of high-quality vision care products (such as the Essilor brand, with Varilux, Crizal, Eyezen, Stellest and Transitions), iconic brands that consumers love (such as Ray-Ban, Oakley, Persol, Oliver Peoples, Vogue Eyewear and Costa), as well as a network that offers consumers high-quality vision care and best ...
• The VisilabGroup, part of the globally operating company EssilorLuxottica, is the No. 1 optician in Switzerland with the brands Visilab, Kochoptik, McOptic, and Linsenmax, and 170 stores.
• Join our global community of over.
• 190,000 dedicated employees.
• around the world in driving the transformation of the eyewear and eyecare industry.
• Discover more by following us on.
• LinkedIn.
• Your with EssilorLuxottica.
• Are you willing to pioneer new frontiers, foster inclusivity and collaboration, embrace agility, ignite passion, and make a positive impact on the world? Join us in redefining the boundaries of what's possible!.
• The Accounting Manager is responsible for leading the statutory accounting and financial reporting activities for Thailand operations, ensuring compliance with local statutory requirements, Group accounting policies, IFRS standards, and internal control requirements. The role oversees accounting operations across multiple legal entities and manufacturing plants, drives process standardization and continuous improvement, supports SAP transformation initiatives, and acts as the key contact for auditors, Group Finance, Global Business Services "GBS", and business stakeholders.
• The position plays a critical role in maintaining the integrity of financial records, supporting business decision-making, managing compliance risks, and developing a high-performing accounting team.
• Financial Accounting & Statutory Compliance.
• Manage the statutory accounting and archives team supporting Thailand operations.
• Ensure the consistency, completeness, and accuracy of accounts payable, accounts receivable, fixed assets, general ledger, and statutory books in compliance with local regulations and Group requirements.
• Validate the completeness and accuracy of month-end, quarter-end, and year-end closing activities, including journal entry review and approval.
• Review and validate statutory financial statements and related disclosures.
• Ensure compliance with Thai GAAP, IFRS, Group Accounting Manual, and local tax regulations.
• Maintain accounting records and supporting documentation in accordance with legal retention requirements.
• Maintain effective accounting controls over financial reporting processes.
• Monitor implementation of corrective actions arising from audit observations.
• Support internal audits, external audits, and compliance reviews.
• Perform monthly Balance Sheet reviews and account reconciliations to ensure completeness and accuracy.
• Ensure timely resolution of audit findings, reconciliation differences, and accounting issues.
• Stakeholder Management.
• Coordinating closely with Global Business Services (GBS) on accounting transactions, reconciliations, documentation, and issue resolution.
• Coordinating with Group Consolidation on finance and accounting related matters.
• Coordinating with Tax department on tax related matter.
• Fixed Asset Management.
• Govern the end-to-end fixed asset lifecycle, including capitalization, depreciation, transfer, physical verification, impairment assessment, and disposal.
• Organize and supervise periodic physical asset counts in accordance with Group and local standards.
• Support compliance with BOI and Customs requirements relating to fixed assets when applicable.
• Lead periodic reviews of asset utilization, impairment indicators, and asset master data quality.
• People Management & Process Improvement.
• Lead, coach, and develop accounting team members.
• Build a high-performance team through continuous learning, mentoring, and succession planning.
• Establish clear objectives and performance expectations.
• Drive continuous improvement initiatives related to accounting processes, reporting quality, automation, and operational efficiency.
• Education.
• Bachelor's Degree or higher in Accounting or Finance.
• CPD license is mandatory.
• CPA is strongly preferred.
• Experience.
• Minimum 8-10 years of accounting and finance experience.
• Minimum 3-5 years in a supervisory or managerial role.
• Experience in a multinational manufacturing environment is highly preferred.
• Experience managing multi-entity accounting operations is preferred.
• Technical Competencies.
• Thai GAAP.
• IFRS.
• BOI accounting requirements.
• Financial reporting.
• Internal controls.
• Statutory compliance.
• Systems Skills.
• Experience with SAP (mandatory).
• Experience with Oracle and Hyperion is an advantage.
• Initiated AI tool for accounting process improvement is an advantage.
• Experience participating in ERP implementation or transformation projects is preferred.
• Soft Skills.
• Excellent analytical and problem-solving skills.
• Strong attention to detail.
• Strong leadership and team management capabilities.
• Effective communication and stakeholder management skills.
• Ability to influence and work across different functions and cultures.
• Language.
• Good command of English, both written and spoken.
• Mobility.
• Able to travel domestically when required.
• Open to temporary relocation to support business needs.

Experience:

5 years required

Skills:

Project Management, Problem Solving, Enthusiastic, Electronics, Automation, English

Job type:

Full-time

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Position: Production Training Manager.
• Location: Lumentum Thailand, Navanakorn - Pathum Thani.
• Department: Productions.
• Reports To: Senior Director, Operations.
• Position Summary.
• We are seeking an experienced and passionate Manufacturing Training Manager to lead the development, implementation, and continuous improvement of training and workforce capability programs across our manufacturing operations.
• This role is responsible for ensuring employees possess the technical, operational, quality, safety, and compliance competencies required to support business objectives, manufacturing excellence, and operational readiness. The Manufacturing Training Manager will partner closely with Operations, Engineering, Quality, EHS, HR, and Production leaders to build a high-performance learning culture while driving workforce development, compliance training, and skills enhancement initiatives.
• The ideal candidate will have strong experience in manufacturing training, learning and development, competency management, instructional design, and organizational capability building within a fast-paced manufacturing environment.
• Training Strategy & Workforce Capability Development.
• Develop and execute the manufacturing training strategy aligned with business goals and operational requirements.
• Establish and maintain training frameworks, competency matrices, certification programs, and employee development pathways.
• Partner with Operations leadership to identify workforce capability gaps and implement development plans.
• Lead workforce upskilling and reskilling initiatives to support business growth and operational transformation.
• Drive a culture of continuous learning and employee development throughout the organization.
• Training Program Management.
• Design, develop, implement, and evaluate manufacturing training programs for operators, technicians, supervisors, and leaders.
• Manage onboarding, orientation, technical skills, cross-training, and certification programs.
• Ensure training content remains current, effective, and aligned with operational requirements.
• Coordinate training schedules and resources to support production demands while minimizing operational disruption.
• Measure training effectiveness and implement continuous improvements based on feedback and business outcomes.
• Technical & Operational Training.
• Partner with Engineering, Quality, and Manufacturing teams to develop technical training programs and work instruction certifications.
• Support new product introduction (NPI), process changes, automation projects,and technology deployment through effective training programs.
• Ensure employees are qualified and certified to perform assigned tasks and manufacturing processes.
• Support knowledge transfer and best practice sharing across manufacturing functions.
• Compliance, Quality & Safety Training.
• Ensure compliance with company policies, regulatory requirements, customer expectations, and industry standards.
• Manage training programs related to EHS, Quality Systems, ISO standards, Responsible Business Alliance (RBA), and other compliance requirements.
• Maintain training records, certification status, and audit-ready documentation.
• Support internal and external audits and ensure timely closure of training-related findings.
• Promote a strong culture of safety, quality, ethics, and compliance.
• Learning Systems & Training Administration.
• Manage Learning Management Systems, training databases, competency tracking, and certification records.
• Develop dashboards and reports to monitor training effectiveness, compliance status, and workforce readiness.
• Ensure training documentation is accurate, standardized, and maintained according to company requirements.
• Utilize data analytics to identify trends and improvement opportunities.
• Leadership & Team Management.
• Lead, coach, and develop the manufacturing training team.
• Build strong partnerships with Operations, Engineering, Quality, HR, and site leadership teams.
• Support talent development, succession planning, and leadership development initiatives.
• Drive employee engagement through learning and development programs.
• Foster a culture of accountability, collaboration, innovation, and continuous improvement.
• Continuous Improvement & Organizational Development.
• Drive continuous improvement initiatives related to workforce capability, training efficiency, and learning effectiveness.
• Implement best practices in adult learning, instructional design, and manufacturing training methodologies.
• Support Lean Manufacturing, Kaizen, and operational excellence initiatives through capability-building programs.
• Benchmark training programs against industry best practices and recommend improvements.
• Bachelor's degree in Engineering, Industrial Management, Organizational Development, or related field.
• Minimum 8-10 years of experience in training, learning & development, workforce capability, or manufacturing training environments.
• Minimum 3-5 years of leadership experience managing training teams or learning functions.
• Experience in electronics manufacturing, semiconductor, optical, automotive, or high-tech manufacturing environments is preferred.
• Strong understanding of manufacturing operations, technical training systems, competency management, and adult learning principles.
• Experience supporting ISO, RBA, EHS, and quality compliance training requirements.
• Experience with Learning Management Systems, training databases, and learning technologies.
• Strong project management, communication, facilitation, and stakeholder management skills.
• Good command of English communication.
• Preferred Competencies.
• Learning & Development Leadership.
• Manufacturing Training & Workforce Capability Development.
• Adult Learning & Instructional Design.
• Leadership & Team Development.
• Change Management.
• Stakeholder Management.
• Compliance & Audit Readiness.
• Continuous Improvement & Operational Excellence.
• Data Analytics & Training Effectiveness Measurement.
• Strategic Thinking & Problem Solving.
• Working Conditions.
• Work in both office and manufacturing production environments.
• Regular interaction with production employees, supervisors, engineering teams, and site leadership.
• May require flexibility to support multiple shifts and training activities based on operational needs.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

Experience:

5 years required

Skills:

Production planning, Project Management, Financial Analysis, Microsoft Office, Teamwork, ERP, English

Job type:

Full-time

• At EssilorLuxottica, we are committed to empowering our people to grow and succeed. This is your opportunity to take your career to the next level, embrace new challenges, and continue making a difference.
• We work for a brighter future, thinking today about the world of tomorrow.
• Don't miss the chance to shape your.
• FutureInSight.
• with us!.
• Your day as an.
• Assistant Production Manager.
• As an Assistant Production Manager, you will be responsible for leading production operations to achieve safety, quality, delivery, productivity, and cost targets. You will work closely with cross-functional teams to optimize production performance, ensure regulatory and ISO compliance, drive continuous improvement initiatives, and develop a high-performing production team that supports business growth and operational excellence.
• Production Management & Performance.
• Manage and execute production plans to ensure production targets, capacity requirements, and business objectives are achieved.
• Monitor production performance, analyze operational results, and implement corrective and preventive actions to improve efficiency and productivity.
• Ensure achievement of quality, productivity, delivery, cost, absenteeism, and overtime targets in line with budget and operational objectives.
• Coordinate with cross-functional teams to optimize the use of manpower, materials, equipment, and production resources.
• Continuous Improvement & Project Management.
• Drive Continuous Improvement initiatives through Lean Manufacturing, Six Sigma, Kaizen, and other operational excellence methodologies.
• Support successful implementation of CAP projects, new product introductions, and strategic operational initiatives.
• Lead or participate in local and regional projects to achieve agreed objectives, timelines, and business results.
• Identify process improvement opportunities and develop action plans to enhance operational performance.
• Compliance, Quality & Safety.
• Ensure strict compliance with applicable laws, regulations, and company requirements, including ISO13485, ISO45001, ISO14001, ISO50001, SA8000, and other relevant standards.
• Ensure all production activities comply with SOPs, PCPs, standardized work instructions, and quality system requirements.
• Support and manage internal, external, customer, and certification audits.
• Promote and enforce Health, Safety, and Environmental (HSE) policies and practices throughout production operations.
• People Management & Leadership.
• Lead, motivate, and develop the production team to achieve individual and team objectives.
• Define OKRs and performance objectives for Production Supervisors and team members.
• Conduct performance reviews, provide coaching and mentoring, and develop training and succession plans.
• Recognize high performance and address performance issues through effective people management practices.
• Promote effective communication and cascade corporate, regional, and site information across the organization.
• Collaboration & Communication.
• Coordinate closely with Production, Quality, Supply Chain, Engineering, Technical Support, and other departments to achieve business goals.
• Support plant-wide communication and foster collaboration, teamwork, and alignment toward common objectives.
• Promote EssilorLuxottica's culture, values, and operational excellence mindset.
• Required.
• Bachelor's degree in Engineering or related field.
• Minimum 5 years of experience in production, manufacturing, or operations functions within multinational manufacturing environments.
• At least 3 years of experience in a supervisory or management role.
• Good command of English, both written and spoken.
• Good knowledge of Microsoft Office applications (Excel, Word, PowerPoint).
• Strong analytical, problem-solving, and decision-making skills.
• Strong leadership and people management capabilities.
• Preferable qualifications.
• Knowledge of Statistical Process Control (SPC) and Financial Analysis.
• Proven experience in Lean Manufacturing, Six Sigma, Kaizen, or other Continuous Improvement methodologies.
• Experience in performance management, coaching, and employee development.
• Familiarity with ERP/MRP systems and production planning processes.
• Understanding of manufacturing processes, quality control systems, cost management, and production optimization techniques.
• Experience working in multinational or international manufacturing environments.
• Our Diversity, Equity and Inclusion commitment.
• We are committed to creating an inclusive environment for all employees. We celebrate diversity and provide equal opportunities to all, regardless of race, gender, ethnicity, religion, disability, sexual orientation, or any other characteristic that makes us unique.

Experience:

8 years required

Skills:

Enthusiastic, Accounting, Taxation, CPA, English

Job type:

Full-time

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• This position plays a pivotal role on Lumentum Thailand Tax matters. This role will work seamless with the Corporate Tax team in developing and execution of the tax strategies, managing day to day tax tasks mainly but not limited to VAT, CIT, withholding tax, and duty, including tax compliance processes review and enhancement, tax com ...
• Develop and execution of tax strategies to best utilize BOI privilege.
• Tax Compliance including internal processes review, tax computations, tax reports and filing, answer TRD inquiries, etc.
• Transfer pricing arrangements, working closely with external professional support in this area and assisting business queries.
• Provide tax advice/support to business projects.
• Work with the revenue department to resolve any tax issues.
• Address any tax related inquiries/issues, both from internal and external.
• Leading Tax projects if any.
• Other tasks assigned by the management.
• Bachelor's degree in Accounting, Taxation, Economy, Law (CPA is preferred).
• 6 years+ of experience in tax advisory, and tax compliance.
• Experience from big 4 is a plus.
• Strong knowledge of all taxes, BOI knowledge is a plus.
• Business Result Oriented, Open minded, with excellent communication and interpersonal skills, being able to work with people from globe with diversified cultural background.
• Continuous Improvement mindset, willing to take challenges to lead/participate in Kaizen projects.
• English as working language.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

Experience:

6 years required

Skills:

Electrical Engineering, Mechanical Engineering, Analytical Thinking, Project Management, Problem Solving, Automation, English

Job type:

Full-time

• Bachelor's or Master's Degree in Automation Engineering, Mechatronics Engineering, Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum 6-8 years of experience in automation engineering, machine design, equipment development, or industrial automation.
• Proven experience leading and managing engineering teams.
• Strong technical expertise in both hardware and software aspects of automation equipment and machine development.
• Demonstrated experience in complex engineering projects from concept through implementation.
• Strong project management and cross-functional coordination capabilities.
• Excellent analytical thinking, problem-solving, and decision-making skills.
• Strong communication, presentation, and stakeholder management skills.
• Proficiency in English for business and technical communication.
• Preferred.
• Experience within a multinational manufacturing or industrial equipment environment.
• Exposure to advanced automation technologies, robotics, Industry 4.0, or smart manufacturing solutions.
• Experience working in global or regional engineering organizations.
• Key Competencies.
• Leadership & People Development.
• Strategic Thinking.
• Innovation & Technology Adoption.
• Project Management.
• Engineering Excellence.
• Stakeholder Management.
• Problem Solving & Decision Making.
• Continuous Improvement Mindset.
• Why Join EssilorLuxottica?.
• At EssilorLuxottica, you are not defined by your.
• job title. We offer a dynamic and collaborative environment where innovation, diversity, and personal growth are encouraged.
• Work on cutting-edge automation technologies and global engineering projects.
• Collaborate with international teams and technical experts.
• Access continuous learning and development opportunities through our Leonardo learning platform.
• Accelerate your career within a global leader in the eyewear and eyecare industry.
• Contribute to meaningful innovations that improve the way people see and experience the world.
• Ideal Candidate Profile.
• We are looking for a hands-on automation leader who combines strong technical expertise with people leadership skills. The successful candidate will be capable of driving engineering innovation, leading high-performing teams, and delivering complex automation projects in a fast-paced global environment.
• Automation Engineering Manager.
• Engineering Manager (Automation/Equipment).
• Mechatronics Engineering Manager.
• Machine Design Manager.
• Industrial Automation Manager.
• R&D Equipment Development Manager.
• Robotics & Automation Engineering Lead.

Experience:

1 year required

Skills:

Problem Solving, Service-Minded, Energetic, Teamwork, YouTube, English

Job type:

Full-time

• Prepare information for promotional campaigns creation and distribution.
• Keen understanding of the financial products and market trend for developing company products.
• Support operations of marketing & sales team.
• Prepare competitors/market information to support campaign setting.
• Create and distribute monthly bulletin/campaign letters of all brands including marketing materials to support sales team.
• Make all analysis reports, campaign report and monthly report for both internal and external parties.
• Coordinate with OEMs, dealers, Regional Managers and AAs regarding campaign detail to ensure its run smoothly.
• Support AAs for subsidy calculation in case of exceptional campaign.
• Bachelor's/Master's degree in Administration/Finance/Economic/Marketing/Insurance.
• At least 1 years of experience in finance (Hire Purchase preferably) or insurance business.
• High level of good attitude and positive thinking about work hard willingness.
• Plenty of passion to drive business success.
• Creativity and always bring up new ideas.
• Detailed person with accurate monitoring and keep looking where the problem is.
• Strong communication skill and good collaborators with other people.
• Have experience in the HP business and broad connection with other people in the market.
• Good at doing and monitoring report of marketing campaign and insurance performance.
• Good command of English.
• Good proficiency in Business Computer Programs and Financial Tools.
• Creative, proactive, energetic, good service-minded, and teamwork-oriented.
• Good communication and interpersonal skills.
• Analytical and problem solving thinking.
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Bangkok Thailand.

Experience:

1 year required

Skills:

Business Development, Product Development, Project Management, Product Testing, Data Analysis

Job type:

Full-time

• Oversee and manage all research and development activities, ensuring that projects are executed effectively from concept to completion.
• Setting project goals, managing timelines, allocating resources, and coordinating with cross-functional teams.
• Lead the team to effectively manage the R&D projects.
• Gather any legal documents, laws, regulations, and patents, necessary for determining the project's feasibility.
• Communicate with the top management to verify the project's priority and ensure that the project is delivered on time based on the standard or requirement.
• Drive the innovation and development of new products in line with company strategy and market needs.
• Ensure that product development aligns with customer expectations, quality standards, and cost-effectiveness.
• Spearhead the development, testing, and launch of new products.
• Collaborate with Marketing, Sales, and Production teams to introduce products to market efficiently.
• Overseeing product testing, packaging, marketing material, and ensuring alignment with brand standards.
• Develop new product technologies to drive innovation and improve production efficiency.
• Manage the end-to-end lifecycle of new product development projects, from ideation through to commercialization.
• Create detailed project plans, set milestones, and monitor progress, ensuring timely delivery while managing risks and changes. Provide updates to key stakeholders.
• Serve as the key liaison for new product coordination between Meyer's global companies, ensuring seamless collaboration on product development.
• Identify and apply new technologies to enhance product offerings and processes.
• Regularly review advancements in industry technology and assess their application for improving company products.
• Communicate with the legal team to ensure that the created technology is feasible for manufacturing & marketing.
• Lead the team in designing and developing innovative technologies. Oversee the implementation of these technologies into products, ensuring alignment with the requirements and specifications provided by key stakeholders, such as the Business Development (BD) team and top management.
• Implement and drive continuous improvement activities throughout the plant.
• Evaluate work processes to identify potential improvements.
• Set up processes and systems to create a foundation for long-term improvement.
• Identify training and development needs for the division.
• Promote, discipline and terminate employees as needed.
• Minimize employee turnover rate.
• Regular updates on project status, challenges, and performance metrics should be communicated via the agreed communication methods.
• Gather business intelligence (patent, technology, and competitive intelligence) to identify new scientific trends and provide suggestions to the BD team.
• Participate in benchmarking and testing competitive products to gain relevant information that can be applied to product specifications.
• Bachelor's or Master's degree in Engineering, Material Science, or related fields.
• Minimum 7-10 years of experience in research and development, with at least 5 years in a managerial position.
• Experience in product innovation, project management, and leading cross-functional teams is essential.
• Industry experience in manufacturing, consumer goods, or technology-based companies is preferred.
• Experience working with global teams and coordinating across international business units.
• Always pursue new technologies and knowledge to be able to utilize the technologies or some technique with the R&D project.
• Excellent communication skills with all levels, from top management to shop floor workers, plus marketing arms, vendors, and customers.
• Fluent in English, both written and spoken. Cantonese is an advantage.
• Proficiency in data analysis, prototyping, and product testing and development methodologies.
• Working Hours: MON - FRI 08.00 AM - 06.00 PM.
• Interested candidates are invited to write in with a full CV/Resume (PDF file and English Only), stating present and expected salaries, and enclosing a recent photograph.
• Meyer Industries Limited Human Resources & Admin. Department.
• 38/9 Moo.5, Laem Chabang Industrial Estate, Tungsukhla, Sriracha, Chonburi 20230.