เงื่อนไขการค้นหา

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Electrical Engineering, English, Thai

ประเภทงาน:

งานประจำ

• The role will primarily support server hardware troubleshooting, fault diagnosis, hardware replacement, firmware upgrades, preventive maintenance, and on-site technical operations for data center and IT infrastructure projects.
• The ideal candidate should have hands-on experience in server hardware maintenance and troubleshooting, with the ability to independently identify hardware faults, perform component replacement, and complete maintenance tasks in a professional data center environment..
• Perform on-site server hardware troubleshooting, diagnosis, and maintenance.
• CPU.
• Memory / RAM.
• HDD / SSD.
• RAID / Storage Controllers.
• Power Supply Units (PSU).
• System / Server Boards.
• Network Interface Cards (NIC).
• Fans and cooling components.
• Other server hardware components.
• Perform hardware replacement and component-level maintenance according to troubleshooting procedures and customer requirements.
• Conduct server installation, decommissioning, relocation, and hardware upgrades.
• Perform firmware, BIOS, BMC/iLO/iDRAC and other server component upgrades.
• Support server configuration, hardware health checks, diagnostics, and system verification after maintenance.
• Troubleshoot server-related issues and perform root cause analysis where required.
• Execute preventive maintenance and health checks for servers and related IT equipment.
• Work with customer teams, data center operators, vendors, and internal project teams to resolve technical issues.
• Follow customer SOPs, MOPs, EOPs, safety requirements, and data center operational procedures.
• Fault descriptions.
• Troubleshooting actions.
• Replaced components.
• Firmware versions.
• Test results.
• Completion reports.
• Provide clear technical reports and documentation after completing maintenance activities.
• Support server spare-parts management, including identification, replacement, return, and tracking of faulty components.
• Participate in on-call, standby, or out-of-hours support when required by project or customer SLA.
• Travel to customer sites / data centers in Thailand when required.
• Perform other server infrastructure and data center operations tasks assigned by the project or operations team..
• Minimum Diploma in Computer Engineering, Information Technology, Computer Science, Electronics Engineering, or a related technical field.
• Hands-on experience in server hardware maintenance and repair is mandatory.
• Strong practical experience in server troubleshooting, hardware fault diagnosis, and component replacement.
• Good understanding of server hardware architecture and components.
• Dell iDRAC.
• HPE iLO.
• Lenovo XClarity.
• Supermicro IPMI.
• Or equivalent server management platforms.
• Good understanding of RAID, storage, memory, CPU, networking, and server power systems.
• Able to read and follow technical manuals, troubleshooting guides, SOPs, and maintenance procedures.
• Good English communication skills, both written and spoken, are required.
• Able to communicate professionally with customers, vendors, and internal teams.
• Willing to work in data center environments and follow strict site access and safety requirements.
• Willing to travel to different customer sites within Thailand when required.
• Able to work independently and take ownership of assigned technical tasks..
• Preferred Qualifications.
• Experience working in a data center, IT infrastructure, server maintenance, or hardware support environment.
• Dell EMC.
• HPE.
• Lenovo.
• Supermicro.
• Cisco UCS.
• Or other enterprise server platforms.
• Experience with Linux / Windows Server troubleshooting.
• Knowledge of networking fundamentals, including Ethernet, TCP/IP, VLAN, and NIC troubleshooting.
• Experience with server deployment, rack installation, cabling, and data center operations.
• Experience working under SLA / NBD / 24 7 support environments.
• Relevant vendor certifications such as Dell, HPE, Lenovo, Cisco, or equivalent are an advantage.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Electrical Engineering, Industrial Engineering, Chemical Engineering

ประเภทงาน:

งานประจำ

• Act as the primary technical contact between Production, Quality, Maintenance, and R&D teams regarding painting-related topics.
• Set up, trial, and fine-tune printing machine and printing robots to achieve optimum production conditions, minimizing defects and ensuring visual quality.
• Lead and manage all technical aspects of the printing and painting process, from surface preparation to finished both process.
• Quality & Color control: Ensure precise color matching, ink mixing, and printing quality to meet strict customer specifications.
• Process Improvement: Monitor the production process, reduce waste (loss/scrap), and solve on-site technical issues effectively.
• Bachelor's degree in Chemistry, Chemical Engineering, Electrical Engineering, Industrial Engineering or related engineering fields.
• Minimum 1-2 years of hands-on experience in Production engineering, specifically in plastic printing and painting processes.
• Must-Have Skill: Strong expertise in printing processes, color matching, and controlling color shades.
• Experience with color control, adhesion testing, and paint durability evaluation.
• Experience with automated painting systems, paint robot, and environmental control systems.
• Strong leadership, problem-solving skill, and the ability to work under pressure.
• Experience in automotive or electronics manufacturing industry will be an advantage.
• Able to communicate effectively in English.

ทักษะ:

Leadership Skill, Automation, Power BI, SQL

ประเภทงาน:

งานประจำ

• Saraburi, Thailand.
• Siam Fibre Cement Group Co. Ltd.
• Apply for Position.
• Or refer someone.
• Job Openings.
• Production Engineer (EE) - Siam Fiber Cement Group (Saraburi based).
• About the job Production Engineer (EE) - Siam Fiber Cement Group (Saraburi based).
• ประสานงานผู้เกี่ยวข้องทั้งภายในและภายนอกเพื่อพัฒนาเทคโนโลยีการผลิต แก้ปัญหาการผลิตรวมถึงศึกษาพัฒนาเทคโนโลยีใหม่ๆในการผลิตเพื่อลดต้นทุน เพิ่ม automation.
• จัดทำและนำเสนอแผนงาน รายงาน และ อัพเดทแผนงานที่ได้รับมอบหมาย.
• แก้ปัญหาและให้คำแนะนำด้านเทคนิคการแก้ปัญหากับหัวหน้างาน และพนักงานผลิตรวมทั้งหน่วยงานใกล้เคียง.
• ประสานงานกับหน่วยงานที่เกี่ยวข้อง เพื่อติดตามการวิเคราะห์ และ แก้ปัญหา ที่เกี่ยวข้องกับคุณภาพของผลิตภัณฑ์.
• ประสานงานกับหน่วยงานผลิต ให้มีการกำหนดมาตราฐานการผลิต (process control) เพื่อควบคุมคุณภาพของผลิตภัณฑ์.
• งานนโยบายและแผนงานประจำปี ได้แก่ ดำเนินการและติดตามผลดำเนินงานตามแผนงานประจำปี, ประสานงานในการจัดทำ และ ติดตามนโยบาย และแผนงานประจำปีของโรงงาน,.
• ประสานงานในการจัดทำและดูระบบบริหาร SFCG, ประสานงาน / รวบรวมข้อมูลจากทุกหน่วยงานในโรงงาน เพื่อเตรียมสำหรับการติดตามการบริหารนโยบายโดย กจก. (Diagnosis).
• งานวางแผนผลิต ได้แก่ประสานงานด้านข้อมูลแผนการเดินเครื่องจักร ระหว่างโรงงาน และ หน่วยงานวางแผน, วิเคราะห์ข้อมูลการผลิต เพื่อปรับปรุงแผนการเดินเครื่องจักร, ประสานงานให้มีการปรับปรุงแก้ไขแผนการผลิตให้เป็นไปอย่างเหมาะสม.
• งานอื่น ๆ ที่ได้รับมอบหมาย.
• ยินดีรับนักศึกษาจบใหม่.
• จบการศึกษาในระดับปริญญาตรี วิศวกรรมไฟฟ้า(EE) G.P.A. > 2.70.
• มีทักษะภาษาอังกฤษในเกณฑ์ดี (TOEIC > 550).
• สามารถใช้ข้อมูลจาก database หรือต่อยอดเพื่อ monitor รายงาน alert ให้ผู้เกี่ยวข้องเพื่อควบคุมต้นทุนการผลิต เพิ่มประสิทธิภาพการผลิต.
• สามารถวิเคราะห์ปัญหาด้วยเทคนิคต่าง ๆ เพื่อหา Solution แก้ปัญหานั้น ๆ ได้ มี logic ในการคิด วิเคราะห์ แยกแยะ ปัญหาได้ดี.
• สามารถใช้โปรแกรม MS Office, Minitab และ Power BI ได้.
• มีทักษะในการเขียนโปรแกรมทางคอมพิวเตอร์ อาทิเช่น SQL เป็นต้น.
• มีภาวะผู้นำที่ดี (Leadership skill) / มีความคิดริเริ่มสร้างสรรค์ (Creative).
• มีความสามารถในการติดต่อประสานงาน และทำงานร่วมงาน กับหน่วยงานอื่น ๆ ได้ดี (Cross-functional).
• สามารถประจำ บริษัท Siam Fiber Cement Group จังหวัดสระบุรี(โรงงานท่าหลวง).
• Apply for Position.
• Or refer someone.
• Share.
• Facebook.
• Line.
• LinkedIn.
• X (Formerly Twitter).
• Whatsapp.
• Email.

ทักษะ:

Electrical Engineering, Industrial Engineering, Data Analysis, Power point, English

ประเภทงาน:

งานประจำ

• Analyze production line issues using data analysis and identify root causes to improve efficiency and performance.
• Drive continuous improvement initiatives to enhance production yield, quality, and productivity.
• Optimize plant performance by improving machine reliability and reducing operational costs.
• Collaborate with cross-functional teams (production, maintenance, engineering) to implement improvement solutions.
• Support ongoing projects related to manufacturing excellence and process optimization.
• Fresh graduates are welcome.
• Bachelor's degree in Industrial Engineering (IE) or Electrical Engineering (EE).
• Minimum GPA of 2.70.
• Good command of English (TOEIC score of 550 or above; score submission can be provided later).
• Proficient in MS Office (Excel, PowerPoint, Word).
• Strong communication skills, adaptability, and ability to work effectively in a team environment.
• Good analytical and problem-solving skills.
• Able to be based at SCG Roofing, Concrete Technology Department, Saraburi.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Production planning

ประเภทงาน:

งานประจำ

• Plan, control, and monitor production activities to meet production schedules and company objectives.
• Analyze production capacity, including Man, Machine, Material, and Method (4M), to ensure efficient resource utilization.
• Monitor daily production performance and ensure compliance with quality, productivity, and delivery requirements.
• Verify the readiness of production resources and ensure adherence to company regulations, work standards, and operating procedures.
• Ensure compliance with 5S, Safety, Quality, and environmental requirements throughout manufacturing operations.
• Investigate production issues, identify root causes, implement corrective actions, and prevent recurrence.
• Coordinate with QA/QC, Engineering, Maintenance, Tooling, HR, Safety, and other departments to support production activities.
• Develop, review, and improve work instructions, standard operating procedures (SOPs), and job standards.
• Lead and support continuous improvement activities, including Kaizen, Suggestion Programs, Small Group Activities, and productivity improvement projects.
• Control departmental budgets and optimize resource utilization to improve operational efficiency.
• Prepare production reports, analyze performance data, and present recommendations to management.
• Promote workplace safety and ensure proper use of Personal Protective Equipment (PPE).
• Support and maintain management systems and certifications, including ISO 9001, ISO 45001, IATF 16949, and related standards.
• Bachelor's Degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or a related field.
• 0-5 years of experience in manufacturing, production engineering, or a related area.
• Knowledge of production planning, manufacturing processes, and quality control systems.
• Good command of Microsoft Office (Excel, Word, and PowerPoint).
• Experience with AutoCAD and/or SolidWorks is an advantage.
• Good communication skills in English (listening, speaking, reading, and writing).
• Strong analytical, problem-solving, and continuous improvement skills.
• Knowledge of Smart Factory, IoT, Digital Transformation (DX), or AI-related technologies is a plus.
• Ability to work effectively in a team environment and coordinate across departments.

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ทักษะ:

Chemical Engineering, Thai, English

ประเภทงาน:

งานประจำ

• Analyze and improve production processes to enhance efficiency and reduce waste..
• Monitor and ensure compliance with quality standards and safety regulations..
• Collaborate with cross-functional teams to implement process improvements..
• Identify and troubleshoot production issues to minimize downtime..
• Prepare and maintain detailed documentation of processes and improvements..
• Support the implementation of new technologies and equipment in production lines..
• Train and guide production staff on updated processes and best practices..
• Bachelor's degree in Chemical Engineering, Rubber Technology, Science or a related field..
• Experience in production or process engineering, preferably in the glove manufacturing sector..
• Strong analytical and problem-solving skills..
• Knowledge of quality standards and safety regulations..
• Proficiency in process improvement methodologies..
• Excellent communication and teamwork abilities..
• Ability to work in a fast-paced and dynamic environment..
• Fresh graduates are welcome..
• English proficiency will be an advantage..

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Good Communication Skills, Production Engineering, Analytical Thinking, Automation, Teamwork, English, Thai

ประเภทงาน:

งานประจำ

• Drive continuous improvement initiatives to enhance manufacturing efficiency, product quality, and cost competitiveness. This role focuses on process optimization, production problem-solving, and maintaining operational excellence through standardized systems and continuous improvement projects.
• Analyze manufacturing processes to identify opportunities for improving productivity, quality, and cost efficiency.
• Lead and implement process improvement initiatives to optimize production performanc ...
• Investigate and resolve production issues by identifying root causes and implementing corrective and preventive actions.
• Manage and execute assigned engineering and continuous improvement projects to achieve business objectives.
• Develop, review, and maintain standard operating procedures (SOPs) and work instructions to ensure consistent operations.
• Support the implementation, maintenance, and continuous improvement of quality, safety, and other management systems.
• Collaborate with cross-functional teams to improve Overall Equipment Effectiveness (OEE), production throughput, and operational performance.
• Identify and adopt new technologies and engineering solutions to improve manufacturing capabilities and efficiency.
• Bachelor's Degree in Mechatronics Engineering, Automation Engineering, Robotics Engineering, or other related engineering disciplines. (Bachelor GPA > 2.70, Master GPA > 3.30).
• 1-3 years of experience in Manufacturing, Production Engineering, Process Improvement, or Continuous Improvement.
• Knowledge of manufacturing processes, process optimization, and production problem-solving.
• Knowledge of AI applications, automation systems, or robotics technologies in manufacturing is an advantage.
• Familiarity with quality management systems, SOP development, and continuous improvement methodologies (Lean, Kaizen, Six Sigma is a plus).
• Ability to analyze production data and identify opportunities to improve OEE, productivity, quality, and cost efficiency.
• Strong analytical thinking, problem-solving skills, teamwork, and good communication skills.
• Good command of English in verbal and written communication (TOEIC > 550).
• Willing to work onsite at Thai Containers Group Co., Ltd. (Pathum Thani Plant).

ทักษะ:

Industrial Engineering, Analytical Thinking, Production planning, SAP, ERP, English, Thai

ประเภทงาน:

งานประจำ

• Act as the main point of contact providing support for production applications (e.g., SAP S/4HANA, MES) to ensure smooth operations.
• Ensure system availability, reliability, and continuity of production processes through effective issue resolution and escalation.
• Monitor system performance and ensure data accuracy in SAP S/4HANA, with all transactions completed correctly and on time.
• Collaborate with cross-functional teams (Production, Planning, Logistics, Maintenance, IT, BPO, and Developers) to support daily operations and system improvements.
• Identify improvement opportunities and drive optimization initiatives for production systems and shopfloor operations.
• Support system implementations, digital transformation initiatives, change/request management, and participate in testing activities (UAT, regression).
• Define and track KPIs, ensure compliance with internal controls, and facilitate user training and adoption of new systems.
• Packing Production Management (50%).
• Plan and control production packing activities to ensure completion according to production schedules and delivery timelines.
• Monitor daily packing output and performance, ensuring targets are achieved with optimal resource utilization.
• Identify and resolve production bottlenecks, minimizing delays and improving overall packing efficiency.
• Ensure compliance with quality standards and operational procedures in all packing processes.
• Analyze packing performance and implement continuous improvements to enhance productivity, reduce costs, and improve delivery reliability.
• Bachelor's degree in Industrial Engineering, IT, Supply Chain, or a related field.
• Minimum 5-10 years of experience in production planning, shop-floor control, SAP support, and/or production and process improvement in a manufacturing environment.
• SAP PP (Production Planning) - mandatory.
• SAP MM (Materials Management) - mandatory.
• SAP PS (Project System) - preferred.
• Good understanding of ERP, MRP, and MES systems.
• Solid knowledge of SAP master data, including BOM, routing, work centers, and production versions.
• Strong analytical thinking and problem-solving skills.
• Good understanding of manufacturing and operational business processes.
• Ability to communicate effectively with both IT and business users, and to act as a key coordinator between functions.
• Demonstrated ability to drive improvement initiatives and support system implementation projects.
• Proactive mindset with a continuous improvement approach.
• Good command of Thai and English (written and spoken).
• Able to communicate and work effectively with foreign colleagues and participate in new project implementations.
• Experience in transformer manufacturing will be an advantage.
• We offer.
• 1 month of guaranteed bonus (Fix bonus) plus Performance Bonus. (Depending on employee's performance result and Business performance).
• 10 days annual leave (Service year 0-5), 15 days annual leave (Service year 6-10), flexible working policy, Flexibility working time.
• Benefit according to local standards: Heath-care insurance benefits to employees and their dependents, annual health checkup, Provident Funds (employees can contribute up to 15%).
• Growth possibility: Learning and development platform, career movement opportunity within organization.
• Possibility to gain experience in international environment.
• Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.
• This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

ทักษะ:

Production Engineering, Chemical Engineering, Product Development, Problem Solving, HACCP, GMP, English

ประเภทงาน:

งานประจำ

• Completing all Kimberly - Clark compliances such as EHS, QMS, Energy, GMP & HACCP etc.
• Using statistical methods and proper engineering tools for process control and monitoring.
• Driving operations team for real time problem solving to ensure all key KPIs align with targets or expectation.
• Leading continuous improvement and providing technical support for process (process capability, time & motion study) product, productivity (OEE) and manufacturing cost.
• Leading LEAN and technical capability improvement to operations team.
• Coordinating and providing technical support to concerned departments to support new product development, capital project, special run, BOM and others as requested.
• Driving all process document in the production lines are well defined and ensure proper training to operations team.
• _You will be maintaining equipment associated with the production, packaging and distribution of ARBEX products through preventative, predictive and corrective maintenance work. This role is part of ARBEX's investment in creating new jobs and expanding its capabilities to produce premium [Scott, Kleenex] that are essential to millions of lives around the world, and right here in [location]. We'll be Unstoppable Together._.
• Bachelor's Degree in Chemical Engineering, Production Engineering or any related fields.
• More than 3 years' experience in LEAN Manufacturing or Process Improvement fields.
• Has analytical skill, Decision Making and Problem-Solving Skills.
• Good command of English both spoken and written.
• Total Benefits.
• We believe that our employees are our greatest asset, and we're committed to providing them with the resources they need to be successful. If you're looking for a rewarding career with a company that cares about its employees, then ARBEX is the place for you.
• To Be Considered.
• Click the Apply button and complete the online application process. A member of our recruiting team will review your application and follow up if you seem like a great fit for this role.
• In the meantime, please check out the careers website.
• And finally, the fine print.
• For ARBEX to grow and prosper, we must be an inclusive organization that applies the diverse experiences and passions of its team members to brands that shape the future of tissue and hygiene, which is why we seek to build a workforce that encompasses the experiences of our consumers. When you bring your original thinking to ARBEX, you fuel the continued success of our enterprise. We are a committed equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, age, pregnancy, genetic information, citizenship status, or any other characteristic protected by law.
• The statements above are intended to describe the general nature and level of work performed by employees assigned to this classification. Statements are not intended to be construed as an exhaustive list of all duties, responsibilities and skills required for this position.
• _No Relocation:_.
• _This role is available for local candidates already authorized to work in the role's country only. ARBEX will not provide relocation support for this role._.
• _#LI-Onsite_.
• Primary Location.
• Samut Prakarn - South Mill.
• Additional Locations.
• Worker Type.
• Employee.
• Worker Sub-Type.
• Regular.
• Time Type.
• Full time.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Production Engineering, Project Management, Problem Solving, Data Analysis, Procurement

ประเภทงาน:

งานประจำ

• Process Design and Development.
• Design, develop, and improve manufacturing processes by analyzing workflows, space requirements, equipment layouts, and resource utilization to achieve operational efficiency and business objectives.
• Process Optimization and Continuous Improvement.
• Identify, lead, and implement process improvement initiatives to reduce costs, eliminate waste, improve productivity, enhance quality, and maximize operational performance using Lean, Six Sigma, Kaizen, TPM, and other continuous improvement methodologies.
• Drive a culture of continuous improvement and operational excellence across manufacturing operations.
• Performance Monitoring and Data Analysis.
• Collect, monitor, and analyze process performance data and manufacturing metrics to identify trends, detect deviations, recommend corrective actions, and drive sustainable process improvements.
• Monitor and improve factory KPIs, including Safety, Quality, Delivery, Cost, Productivity, Yield, Waste, and Overall Equipment Effectiveness (OEE).
• Problem Solving and Troubleshooting.
• Analyze and resolve technical, operational, and process-related issues in manufacturing operations through structured problem-solving methodologies, root cause analysis (RCA), and implementation of corrective and preventive actions (CAPA).
• Project Management and Implementation.
• Lead or support process improvement, cost-saving, capacity expansion, automation, digitalization, new product introduction, and manufacturing transformation projects from concept through implementation, ensuring timely and successful delivery.
• 4M Change Management.
• Manage and monitor changes relating to Ma n, Machine, Method, and Material (4M), ensuring appropriate risk assessments, change controls, validations, and stakeholder approvals are completed prior to implementation.
• Safety, Quality, and Compliance.
• Conduct risk assessments, Job Safety Analyses (JSA), and process hazard evaluations for new and modified processes. Ensure compliance with safety, quality, environmental, regulatory, and company requirements, while developing and implementing best practices, standards, and control measures to enhance product quality, food/product safety, and operational excellence.
• Cross-Functional Collaboration.
• Collaborate closely with Production, Engineering, Quality, Technical, Maintenance, Supply Chain, and other stakeholders to optimize manufacturing processes and support operational objectives.
• Documentation and Standardization.
• Develop, maintain, and continuously improve process documentation, including Standard Operating Procedures (SOPs), Work Instructions, Process Flow Diagrams, Control Plans, and other operational standards.
• Ensure process documentation remains accurate, current, and compliant with company and regulatory requirements.
• Audit and Compliance Support.
• Support internal and external audits and ensure timely closure of findings related to process, quality, safety, environmental, and regulatory compliance.
• Training and Capability Building.
• Provide technical coaching, training, and guidance to production and support teams on process improvements, problem-solving techniques, standard work practices, and operational excellence principles.
• The experience we're looking for.
• Education: Bachelor's degree engineering / Scientific or a related field.
• Minimum 3-5 years of relevant experience in Process Engineering, Production Engineering, Manufacturing Excellence, Continuous Improvement, or Process Improvement roles within the Pharmaceutical, Food & Beverage, Consumer Healthcare, Medical Device, or FMCG industries.
• Knowledge of automation and control systems is preferred.
• Experience with process simulations and standard operating procedures.
• Experience in develop/educate working team.
• The skills for success.
• Strong communication and interpersonal skills.
• Ability to work effectively with both technical and non-technical stakeholders.
• Strong analytical and problem-solving skills.
• Results-oriented with the ability to drive continuous improvement initiatives.
• Open-minded, adaptable, and receptive to change.
• Strong teamwork and cross-functional collaboration skills.
• Ability to manage multiple priorities and perform under pressure.
• Good command of spoken and written English.
• Self-motivated and proactive with a strong sense of ownership.
• Willingness to travel domestically and internationally as required.

ทักษะ:

Problem Solving, Product Testing, Product Design, Procurement, Negotiation, Electronics

ประเภทงาน:

งานประจำ

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• Summary.
• The Manager, ICT Test Manufacturing Engineering is responsible for effectively managing the resources who accept, transfer, install, improve and maintain ICT and Flying Probe test equipment and test programs that are used for product testing and design verification. They also may support the test development of the test equipment and processes to ensure robust and high quality test solutions and final products are realized.
• Detailed Description.
• Support development of production test strategies based on product design specification.
• Develop test plans and requirements for customer products including both hardware and software elements.
• Lead the procurement, qualification, and installation support for manufacturing for a large customer.
• Be accountable for the test process optimization with a focus on productivity improvements to cycle time and yield within a CFT or across a large equipment set serving multiple customers.
• Leading SMED project for ICT.
• Provide project leadership, including management of (and communication with) team members, suppliers for comprehensive test deployments including structural, functional, system, stress and final test applications for a large customer.
• Support sales process by providing support to the quoting process.
• Work with Design to enhance solutions with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keep up to date with relevant industry knowledge and regulations.
• Lead and drive complex problems related to product yield or test performance.
• Set yearly plans and goals for the department, give direction on expected performance, provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Skills in Coaching/Mentoring, Communication/Negotiation/Presentation.
• Creative Problem Solving, Working Effectively with Other.
• Customer Interaction/Stakeholder Management.
• Quality & Lean, D/PFMEA, 8D/Corrective Action.
• Equipment Safety, Design of Experiments (DOE).
• Demonstrate "People & Team Leadership Behaviors".
• Ability to manage/lead complex, multiple line engineer project.
• Typical Experience.
• Experience in large-scale In-circuit MFG ICT test support.
• Experience in ESD Controls, Component Module Programming, ICT Equipment Maintenance, ICT Engineering Technical Support, 3070 and Teradyne ICT Test Development Applications.
• Typical Education.
• Bachelor's Degree or higher in Electronics or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

ทักษะ:

Software Development, Product Development, Project Management, Industrial Design, Problem Solving

ประเภทงาน:

งานประจำ

Req ID: 131152 Remote Position: No Region: Asia Country: Thailand State/Province: Chonburi City: Laem Chabang Summary The Lead Engineer, Software develops, debugs, tests, deploys and supports code to be deployed in systems/products/equipment for various applications. They write, debug, maintain, and test software in various common languages and for software at various levels in the hierarchy (from Firmware to Application). Software creation follows an agreed to development process (such as Agile, Scrum, etc.) and complies with the product life cycle development (phase/gate delivera ...

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Good Communication Skills, Product Development, Project Management, Quality Assurance, Product Testing

ประเภทงาน:

งานประจำ

Req ID: 125170 Remote Position: No Region: Asia Country: Thailand State/Province: Chonburi City: Laem Chabang Summary The Manager, Test Manufacturing Engineering (ICT Lead) is responsible for effectively managing the resources who accept, transfer, install, improve and maintain automatic test equipment and test programs that are used for product testing and design verification. They also may support the test development of the test equipment and processes to ensure robust and high quality test solutions and final products are realized. Detailed Description Performs tasks such as, b ...

ทักษะ:

Quality Assurance, Microsoft Office, Automation, SOLIDWORKS, Assurance

ประเภทงาน:

งานประจำ

Our Purpose TERADYNE, where experience meets innovation and driving excellence in every connection. We are fueled by creativity and diversity of thought and in our workforce. Our employees are supported to innovate and learn something new every day. We cultivate a culture of inclusion for all employees that respects their individual strengths, views, and experiences. We believe that our differences enable us to be a better team - one that makes better decisions, drives innovation and delivers better business results. Opportunity Overview Working location: Prachinburi, Thailand Comp ...

ทักษะ:

Microsoft Dynamics, Accounts Payable, node.js, Python, SAP, ERP, SQL

ประเภทงาน:

งานประจำ

• Bangkok, Bangkok, Thailand.
• สมัครงาน.
• หรือแนะนำผู้อื่น.
• ตำแหน่งที่เปิดรับ.
• Senior Full-Stack Developer (สัญญาจ้าง 1 ปี).
• รายละเอียดตำแหน่ง Senior Full-Stack Developer (สัญญาจ้าง 1 ปี).
• About the Role.
• Sunsulution / 21Sunpassion (owner of the Bearhouse brand) is scaling toward a planned public listing, and our IT function operates on a lean, high-leverage model: a small team of senior engineers who use modern AI tooling to deliver at scale.
• The Senior Product Engineer is an end-to-end owner. You will take business problems and deliver production software from design through deployment and ongoing maintenance. Your first mandate is to build our Vendor Invoice Intake system replacing a manual, paper-and-email process in Finance/AP with a fully digital workflow that carries a complete, audit-ready trail suitable for external audit under our listing timeline.
• You will work alongside AI coding tools as a standard part of your workflow, while retaining full ownership of the quality, security, and correctness of everything you ship.
• Design and build production-grade, full-stack internal applications (frontend, backend, database).
• Own the Vendor Invoice Intake system end to end: vendor portal, 3-way match (PO / Goods Receipt / Invoice), DOA-based approval workflow, and immutable audit logging.
• Integrate with SAP and enterprise identity via Entra ID (OIDC).
• Use AI coding tools (Claude Code, Cursor, GitHub Copilot) effectively while owning code review, testing, and security validation of all output.
• Build reusable platform components (authentication, workflow engine, audit logging) to accelerate delivery of subsequent internal applications.
• Partner closely with Finance and business stakeholders to understand processes before building.
• Proven track record of shipping production software as a full-stack engineer (demonstrated through portfolio or work samples, not coursework alone).
• Frontend: React / Next.js.
• Backend: Node.js or Python.
• Database: PostgreSQL / SQL Server, with the ability to design schemas and write SQL independently.
• REST API design; authentication via OAuth2 / OIDC.
• Demonstrated ability to use AI coding tools in a real workflow, with the judgment to review, debug, and take full ownership of AI-generated code. A disciplined prompt review test security-check loop is expected.
• A security- and correctness-first mindset: input validation, access control, and logging built in from the outset rather than added later.
• Strong communication of technical trade-offs, including design rationale and associated risks.
• Preferred Qualifications.
• Working knowledge of Finance / Accounts Payable processes (invoicing, PO/GR matching, approval hierarchies, internal controls).
• Prior ERP integration experience (SAP Layer, Microsoft Dynamics 365) or general system-to-system integration (API, webhook, file, EDI).
• Experience delivering systems in a compliance or audit context (PDPA, ITGC, or SOX-equivalent controls), or systems that serve as a system of record.
• Experience establishing CI/CD, automated testing, or observability.
• สมัครงาน.
• หรือแนะนำผู้อื่น.
• แชร์.
• Facebook.
• Line.
• LinkedIn.
• X (Formerly Twitter).
• Whatsapp.
• Email.

ทักษะ:

Enthusiastic

ประเภทงาน:

งานประจำ

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! Reporting to Equipment & Maintenance Manager or Sr. Manager to drive technical problem resolution and process execution to ensure production targets are met and product quality meets customer expectations. As the Thailand base product engineer, the responsibilities also include. Take corrective action when equipment / tooli ...

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electrical Engineering, Microsoft Office, Automation, Leadership Skill, ISO 14001

ประเภทงาน:

งานประจำ

• Plan, control, and manage maintenance activities for electrical systems and machinery to ensure high efficiency and reliability.
• Establish and execute Preventive Maintenance (PM) and Corrective Maintenance (CM) programs.
• Manage emergency repairs to minimize machine downtime and production interruptions.
• Supervise high voltage and low voltage systems, including MCC, MDB, Substation, and Generator operations.
• Oversee automation and control systems such as PLC, Inverter, Servo Drive, HMI, SCADA, as well as Sensors and Instruments.
• Prepare budgets and control maintenance expenses, spare parts, and related equipment within approved limits.
• Lead, develop, and coach engineers and electricians to enhance technical skills, safety awareness, and overall performance.
• Coordinate with Production, Engineering, and Safety departments to ensure continuous production operations.
• Conduct Root Cause Analysis (RCA) for electrical failures and implement sustainable improvement plans.
• Monitor and manage energy consumption of machines and equipment to improve energy efficiency and cost savings.
• Ensure compliance with international standards and quality systems such as ISO 9001, BRC, ISO 14001, and ISO 45001.
• Education: Bachelor's or Master's degree in Electrical Engineering (Power, Control, Mechatronics, or related fields).
• Experience: Minimum 7-10 years of maintenance experience in electrical systems and industrial machinery, with at least 3-5 years in a supervisory or managerial role.
• Strong knowledge of high voltage systems, transformers, grounding systems, short-circuit protection, and lightning protection.
• Proficient in automation and control systems (PLC, Inverter, Servo Drive, SCADA, Sensors, Automation Systems).
• Solid understanding of electrical safety standards, including Lock Out Tag Out (LOTO) and Arc Flash protection.
• Skilled in people management, strategic planning, and analytical problem-solving.
• Proficiency in maintenance management software (SAP, Maximo, CMMS) and standard computer applications (Microsoft Office, Google Sheets).
• Knowledge in renewable energy, energy-saving practices, Solar Rooftop systems, and Power Monitoring Systems (PMS).
• Strong leadership, able to perform well under pressure, with excellent communication and interpersonal skills.
• Ability to read technical manuals and communicate with suppliers/contractors in English. Manager.
• วิธีการสมัครงาน.
• Click the Apply for Job sign to apply for a job.
• Typical company response costs. Provident fund / Bonus / Church annual results 2 frequencies / Special activity allowance / Uniforms / Transportation / President's children 2 again / Annual banquet.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Software Development, Architecture, Automation, TypeScript, Leadership Skill

ประเภทงาน:

งานประจำ

About the Role We are looking for a Senior Software Engineer to build, scale, and evolve Finnomena's core products and platforms. This role is hands-on and impact-driven: you will own technical solutions end-to-end, influence product and architectural decisions, and raise the engineering bar across teams. Responsibilities Contribute to technical strategy for key initiatives and drive execution through hands-on development and technical leadership within your team. Tackle complex, open-ended problems by defining pragmatic technical solutions that deliver real business impact. Write ...

ประสบการณ์:

7 ปีขึ้นไป

ทักษะ:

Electrical Engineering, Industrial Engineering, Mechanical Engineering, Statistical Analysis, Enthusiastic

ประเภทงาน:

งานประจำ

• Evaluate, select, and recommend manufacturing equipment based on technical capability, product requirements, reliability, safety, and cost-effectiveness.
• Support equipment purchasing by preparing technical specifications, evaluating vendor proposals, and providing technical recommendations.
• Oversee the installation, qualification, setup, calibration, validation, modification, and upgrade of manufacturing equipment and tooling.
• Provide technical and maintenance engineering support to maximize equipment uptime, reliability, utilization, and production efficiency.
• Perform and support preventive maintenance (PM), corrective maintenance (CM), equipment troubleshooting, and complex repair activities.
• Analyze equipment failures and recurring issues, identify root causes, and implement effective corrective and preventive actions to reduce downtime.
• Develop programs and technical solutions to improve equipment performance, reliability, capacity, machine utilization, and overall equipment effectiveness.
• Define, develop, and maintain preventive maintenance schedules, procedures, checklists, and equipment maintenance standards.
• Monitor and analyze equipment performance data and maintenance trends using statistical and data-analysis tools.
• Lead or support equipment improvement projects focused on productivity, product quality, cost reduction, cycle-time improvement, and operational efficiency.
• Provide technical support to Equipment Maintenance, Production, Manufacturing Engineering, and Process Engineering teams.
• Collaborate with Quality, Facilities, EHS, Supply Chain, and other cross-functional teams to support smooth manufacturing operations.
• Support New Product Introduction activities and ensure equipment, tooling, and production lines are ready for prototype builds and mass production.
• Maintain current records of equipment manufacturers' technical notices, software or hardware upgrades, obsolescence risks, and safety issues.
• Prepare and maintain equipment specifications, qualification documents, maintenance records, equipment history, SOPs, work instructions, PM checklists, and other technical documentation.
• Establish and maintain an effective spare-parts strategy, including critical-spare identification, inventory requirements, and obsolescence planning.
• Coordinate with equipment manufacturers, vendors, and external suppliers regarding equipment installation, troubleshooting, repairs, upgrades, spare parts, and technical support.
• Support engineering changes, machine modifications, process transfers, and automation improvement initiatives.
• Ensure all equipment and maintenance activities comply with applicable safety regulations, EHS requirements, quality systems, and company standards.
• Provide technical guidance, coaching, and training to technicians and operators on equipment operation, preventive maintenance, and basic troubleshooting.
• Participate in equipment-related audits and ensure that required documentation and corrective actions are completed on time.
• Perform other equipment engineering duties and support production requirements as assigned.
• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Mechatronics Engineering, Industrial Engineering, Automation Engineering, or a related engineering discipline.
• At least seven years of relevant experience in manufacturing equipment engineering, equipment maintenance, manufacturing engineering, automation support, or a related technical function.
• Experience in electronics, semiconductor, optical, photonics, or another high-technology manufacturing environment is preferred.
• Proven experience in equipment selection, installation, qualification, maintenance, troubleshooting, modification, and performance improvement.
• Strong knowledge of preventive and predictive maintenance systems, equipment reliability, troubleshooting methodologies, and root-cause analysis.
• Working knowledge of PLCs, automation and control systems, sensors, motors, pneumatic systems, mechanical systems, electrical systems, and industrial equipment.
• Experience working with equipment-performance indicators such as uptime, downtime, MTBF, MTTR, machine utilization, and overall equipment effectiveness is preferred.
• Familiarity with statistical analysis tools, continuous improvement methodologies, CAPA, Lean Manufacturing, Six Sigma, or similar improvement approaches.
• Ability to read and interpret engineering drawings, electrical diagrams, mechanical drawings, equipment manuals, and technical specifications.
• Strong analytical and problem-solving skills, with the ability to identify root causes and implement sustainable solutions.
• Good project-management, planning, and organizational skills, with the ability to manage multiple priorities.
• Proactive, self-motivated, task-driven, and able to work effectively both independently and within a cross-functional team.
• Good communication, presentation, and coordination skills in both English and Thai.
• Ability to work effectively under pressure in a fast-paced manufacturing environment.
• Flexibility to support production requirements and collaborate with global teams outside regular working hours when necessary.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Industrial Engineering, Chemical Engineering, Production planning, Data Analysis, Leadership Skill

ประเภทงาน:

งานประจำ

Overview Minor Food is one of Asia's most dynamic food service companies and a leading global restaurant operator, with more than 2,700 outlets across 25 countries. Our portfolio spans a wide range of well-loved brands - from The Pizza Company, Swensen's and Sizzler to Dairy Queen, Burger King, The Coffee Club, Bonchon, The Steak & More, Benihana and more. Driven by a commitment to delivering exceptional customer experiences and achieving the highest standards of satisfaction. We grow by innovating, expanding into new markets and investing in the people who make it all happen. Whet ...