Filter Jobs

Experience:

3 years required

Skills:

Research, Data Entry

Job type:

Full-time

• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Recommend system modifications.
• Creation of an Electronic component library for simulation.
• Analysing and interpreting data and information.
• Creating Schematic simulation reports and documentation.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Knowledge in Analog circuit design and Digital circuit design.
• Knowledge in Electronic component.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 0-3 years of experience with hardware Design.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

Automation, Product Development, CAD, English

Job type:

Full-time

• Assist the engineering staff in studying, proposing different project feasibility concept solutions for automation projects and design of electrical systems, in terms of costs, technical feasibility, lead time, simplicity, and standardization by involving all relevant stakeholders.
• Coordinate with internal resources to ensure flawless execution of projects.
• Participate and coordinate with production in all company's activities in order to improve machines quality, productivity and meet the customer satisfaction.
• Follow the product and propose requested changes and corrections throughout the warranty period for new equipment.
• Perform risk evaluation to minimize project risks.
• Develop and evaluate experimental plans for validation of prototypes or machine improvements in relation with other departments (Continuous Improvement, Quality, Product Certification, Production).
• Work with the Engineering team for producing/updating all necessary 3D models, 2D drawing, calculation note, operation manuals and Bill of Material in accordance with applicable standards and procedures.
• Support the Continuous Improvement team when opportunities arise in automation and electrical system improvements of exist machine.
• Summarize results and conclusions in design reports, machine manuals (maintenance and operation).
• Support technical sourcing wherever applicable.
• Qualification Requirements: Bachelor or Master Degree in Mechatronics Engineering or related field.
• Min. 1-3 years of technical experience or product development in Machine manufacturing industry.
• Experience on whole machine developing or manufacturing is mandatory.
• Experience on lean product development is a plus.
• Experience on prototyping and validation is a plus.
• Experience on Mechanical and Hydraulic system is a plus.
• Experience on IIOT system is a plus.
• Experience on Solidworks Electrical Pro. is a plus.
• Experience on Schneider PLC & HMI programing is a plus.
• Good communication in English.
• Strong experience in CAD software and SolidWorks program is essential.
• Be able to create 3D models and 2D part drawing as well as assembly drawing using interlink function of Solid works.
• Good Knowledge of machinery design and problem analysis.
• Good knowledge of various international standard relating to machine design.
• Good knowledge of machine fabrication method.
• Self-initiative, enthusiasm.

Experience:

15 years required

Skills:

Research, Electronics, Data Entry

Job type:

Full-time

• Design, develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate with other engineers including reviews of their work.
• Review and interpret customer documentation, conduct appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Recommend system modifications.
• PCB layout Design, Schematic by using Allegro Candence Software.
• Participate in HW/Layout review.
• PCB stack up review.
• Work with the Electrical and Mechanical Engineers to ensure the design meets all requirements from an electrical performance and mechanical enclosure perspective.
• Create and export manufacturing files ( drawing, gerber ) and review DFM/DFT with Manufacturing team.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Bachelor s degree in Electronics Engineering, or equivalent experience.
• 10+ years experience of PCB high speed layout design using industry standard PCB design.
• Experience with using Allegro Cadence software.
• Experience with high current density designs.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 10 to 15 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Job type:

Full-time

• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Design, modify and implement systems that meet customer and Celestica needs. e.g. creation of Schematics, Bills of material, diagrams, drawings, etc.
• Keep up to date with relevant industry knowledge and regulations.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Analyse and interpret data and information.
• Recommend modifications for systems.
• Create reports and documentation.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Entry Level to 1 year.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

English

Job type:

Full-time

• Responsible for planning preventive maintenance schedules for air condition & Fire protection systems.
• Responsible for coordinating and managing vendors and suppliers to preventive maintenance and payment plans.
• 2nd Level support to Data Center Operation (FOC), on site to solve Incident and Problem management.
• 2nd Level support to engineer team all site, Data Center (TT1, TT2, MTG, BNA).
• To create & update reports and documents to comply with ISO 20k, 22k, 27k, 50k & TCOS standards.
• Review PUE, cost saving energy and report.
• Measured Efficiency air system and record annual report.
• Responsible for implementation of Mechanical such as comfort air, precision air.
• Responsible for implementation of Fire suppression such as FM200, NOVEC, CO2, Fire Sprinkler, Fire Pump, Fire alarm, and Vesda.
• Working period office time 9:00 - 18:00 and able to standby on call or onsite to work on holiday.
• Bachelor degree of Engineering, Mechanical engineering or related field.
• At Least 3 years experience in maintenance air conditioning such as comfort air, precision air, chiller air cool, water cool, pump motor: implement and support for mechanics-air condition systems in buildings or Data Centers.
• At least 1 years experience in designing air conditioners such as comfort air, precision air, chiller air cool, water cool, pump motor: implement, and support for mechanics-air condition systems in building.
• Able to Air - Diagram and Psychrometric chart knowledge.
• Able to work as a team and work in and standby on call on holiday.
• Able to work overtime if required and a hotline arrives (Less than 1 hour on site from your home).
• Proficiency in English communication is beneficial.
• Work Location: TrueIDC - Bangna Site (KM26).

Experience:

5 years required

Skills:

Research, Product Design, English

Job type:

Full-time

• Design and develop the functional testers, including hardware & software elements, following the customer test specification/test requirement.
• Review equipment data sheets and select appropriate equipment based on requirements.
• Support creation of structural or functional test strategy and test plan to meet project goals and requirements.
• Support creation of technical proposals with costed BOM and hours estimates.
• Debug tester issues using the design of experiments, tools, and failure analysis methodologies.
• Ensure to deliver the goods and follow the project plan. Project management and cost planning.
• Provide high-level test hardware and software solution architecture.
• Provide technical support to the production team. For engineering change, fixing the fault failure issue.
• Review the tester concept design with the mechanical engineer and provide good feedback to meet the project goals and requirements.
• Collaborate with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics, and user experience.
• Create reports and documentation.
• Perform tester commissioning on local / overseas.
• Drive problem-solving and corrective action related to the causes of the project issue.
• Able to support production work abroad at different times. In a necessary situation Whether it's remote control or answering emails.
• Responsible for overseeing project execution and ensuring timely completion by analyzing project scope and defining specifications.
• Develop test methods for product investigations, assess the adequacy and sequence of test programs, and examine samples to ensure compliance with requirements.
• Identify key factors [Risk/Mitigation plan ] for tester improvement and customer satisfaction enhancement.
• Prepare comprehensive reports documenting project proposals and outcomes estimation.
• Knowledge/Skills/Competencies.
• Bachelor s degree in Electronics, Industrial, Mechatronic engineering, or in a related field.
• Proficiency in developing programming languages such as Labview, Teststand, PLC, Python, Robot Framework, C and C++.
• Ability to read hardware schematic. Compare and understand equipment specifications. [Proficiency with Altium software/Easyeda is preferred.].
• Strong skill in wiring and equipment assembly.
• Have background experience in 3D/CAD review (SolidWork).
• Ability to work under pressure and with limited time, positive attitude, teamwork, and good interpersonal skills.
• Able to travel locally / overseas for test product implementation, and commissioning.
• Professional written and verbal communication skills in English.
• Males must be exempt from military service.
• Minimum of 5 years of working experience in test development or related industry.
• Strong analytical skills in innovative approaches to electrical circuit systems/PCB design development.
• Typical Experience.
• Minimum of 5 years of working experience in test development or related industry.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Safety Management, Assurance, Sound Engineering, English

Job type:

Full-time

• Brenntag Safety, Health & Environmental and Process Safety Management Guidelines and Processes.
• Lead the local team in establishing process safety management system, standards, procedure and practices on-site.
• Provide on-site guidance and steers in new projects with good safety engineering and chemical knowledge, experience and skill sets.
• Support the Managing Director / Supply Chain Team in engineering and technical decisions through technical report / engineering specifications / engineering vendor packages reviews.
• Coordinate all process safety related and asset integrity works and activities according to Brenntag and International standards.
• Collaborate with local Operations/Logistics/QSHE Teams by providing process safety guidance in acquisitions, projects, modification and vendor/service provider/3PL/ contractor sourcing.
• Drives Brenntag Path-to-Assurance (PtA) program to successful implementation.
• Reports to Regional PSM Manager on site/facility s progress of process safety implementations.
• Set up and perform internal site process safety assurance program.
• Verify engineering and technical documents for safety assurance.
• Facilitate or organize process hazard analysis sessions.
• Provide guidelines on controls and safety requirements for HAC/ATEX zoning areas.
• Work closely with Operations / Logistics departments in maintaining all technical and engineering drawings are standardized and according to sound engineering practices and protocols.
• Conduct customer/contractors/3PL/service vendors audits with other departments, providing process safety and engineering perspectives.
• Conduct PSM trainings and investigations.
• Provide advice on maintenance regime (Preventive, Predictive, Corrective) management to ensure asset integrity, functionality and its availability for use.
• Implement process safety performance metrics and provide analysis for continuous improvement.
• Legal and Compliance Liaison personnel for external interfaces e.g. with government agencies, to ensure license-to-operate that is process safety dependent be registered and renewed in timely manner. E.g. MHI / CIMAH / MHF licenses.
• Work closely with local QSHE Manager on process safety related matters such as fire safety, dust explosivity, toxic or hazardous releases, chemical reactivity/compatibility storage and handling, environmental control and protection compliance concerns.
• Govern the asset integrity requirements through mandatory inspections, statutory examination and professional services.
• Education: Minimum a Bachelor degree in Chemical / Process / Safety / Mechanical Engineering
• Experience: Minimum 15 years and above working experience.
• rack record of engineering design, Process controls and project management experiences.
• Experience in process safety management, human factors, design safety, HAC/ATEX, PHA facilitation, fire safety, hazardous materials and DG management.
• Working experience in the oil/gas/chemicals industry an advantage.
• Understanding of batch manufacturing process is a plus.
• Working experience in distribution and/or logistics an advantage.
• Experience in safety case regime an advantage.
• Others: Adaptable to changes and has passion in SHE.
• Ability to inspire/influence and spearhead new initiatives and changes.
• Ability to work independently with minimum supervision.
• Good team player.
• Good planning, analytical, coordination and presentation skills.
• Good people management and communication skills.
• Good command in spoken and written English.
• Brenntag TA Team

Skills:

Data Entry

Job type:

Full-time

• Develop and implement new manufacturing applications to support customer products.
• Focus on developing application software and tooling for a complex machine or a series of several simpler, mechanical process steps.
• Define process problems that lead to throughput or quality issues, evaluate cause of problem, and implement solutions to stabilize processes.
• Support the evaluation of new equipment, coordinate software and hardware upgrades, set equipment specifications and qualification tests with supervision.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• Entry level to 1 year.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

Data Entry

Job type:

Full-time

• Design, develop, and implement new manufacturing processes to support customer products.
• Develop application software and tooling for a series of complex machines and mechanical process steps within a manufacturing sector.
• Execute with support, capability of machines and process steps using Design of Experiments and statistical methods to ensure maximum utilization of critical resources, maximum throughput, minimum cost and capacity growth; involves integrating equipment ...
• Solve technical product, process, component, and related problems that affect the efficient operation and/or manufacture of products.
• Provide feedback to product designers on suitability of designs for manufacturability with supervision.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Risk Management, Research, Electronics, English

Job type:

Full-time

• Sales Opportunity Pursue: Collaborate closely with the sales team to identify and secure sales opportunities, ensuring we meet our annual sales and order targets.
• Sales Support & Training: Provide ongoing support to the sales team, including training on Digital Energy solutions for Data Centers, to enhance their capabilities and customer interactions.
• Technical Proposal Preparation: Prepare detailed technical proposals and support the tendering process to ensure competitive and compelling submissions.
• Technical Governance & Risk Management: Offer technical governance and risk management during the sales (S2 review) and project execution stages, ensuring solutions meet quality and safety standards.
• Complex Solution Development: Support third-party system integration and assist in the development, testing, and implementation of complex solutions.
• Engineering Standardisation: Provide expertise in system design, engineering, and implementation for complex upgrade projects, utilizing engineering software tools and application standards.
• Collaboration with Offer Management & R&D: Work with Offer Management and R&D teams to identify offer gaps, product requirements, and contribute to the roadmap.
• System Architect Community Animation: Foster a cohesive and collaborative System Architect community, encouraging the sharing of domain knowledge and leveraging experiences for customer success.
• Pre-sales Activity Support: Engage in pre-sales activities, including prospecting, lead qualification, research, demonstrations, proposal preparation, and high-level system architecture for strategic and targeted accounts.
• Engineering Leadership & Development: Lead by example in developing personal skills and competencies to become a Trusted Advisor. Provide coaching and mentoring to team members to enhance their professional growth.
• Electrical & Electronics Engineering, Mechanical Engineering, Instrumentation & Control Engineering or related Degree\.
• Working Experience.
• 8 - 10 years of working experience.
• System integration, building and power systems design, facility management, energy management.
• Others.
• English spoken.
• Innovative and has strong passion for Building and Power Management solutions.
• Pro-active and self-motivated team player.
• Go-getter, over achievers and great aptitude for sales winning.
• Good Communication and interpersonal skills.
• Good presenter and able to communicate fluently with customers.
• Able to work independently.
• IT system and network system know-how.
• Exposure to projects sales and/or execution in country.
• Good sense of customer service.
• Leadership skills.
• Analytical skills.
• End User and Solution Approach.
• Primary Location: TH-10-Bangkok.
• Schedule: Full-time Unposting Date: Ongoing

Skills:

Project Management, Financial Reporting, Accounting

Job type:

Full-time

• Responsible for understanding and implementing the customers technical roadmap and related process development projects.
• Lead and implement the development and release of the full manufacturing process for new customer products.
• Understand and provide feedback on customers technical requirements to team members and management.
• Responsible for developing and implementing costed and optimized feedback using Design for manufacturability (DFX) tools and processes, with the goal of reducing manufacturing cost and improving quality and reliability of product.
• Develop, plan and lead the assessment of the capability of process applications using Design of Experiments.
• Devise process controls and data collection strategies and evaluate complex data to assist with reporting yield, reliability and diagnoses to root causes failures impacting product quality.
• Ensure accurate and timely communication to management on critical technical and business issues.
• Set yearly plans and goals for the department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage/lead complex, multiple line engineering projects that may also involve other functions. Demonstrate solid understanding of the technical, financial and people aspects of the project. Able to create a project/change management plan and ensure that the project is delivered within the assigned time and budget. Ability to recognize project barriers and develop mitigation plans.
• Leadership - Demonstrate "People & Team Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning - Ability to create financial plans for your projects, align them internally with your line of management and other functions and externally if needed. Create project plans, profitability calculations, risk and sensitivity analysis, able to recognize barriers and mitigate profitability risks. Fully knowledgeable about internal and external financial reporting, accounting and tax requirements relevant to your area of expertise.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Typical Experience.
• 10+ years of work experience in PCB assembly manufacturing field.
• Typical Education.
• Degree or higher in Mechanical/Chemical/Electrical Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

2 years required

Skills:

Assembly, Electronics

Job type:

Full-time

• Reads and analyzes schematic diagrams, circuit descriptions and similar technical information.
• Troubleshoots and repairs failed products. Inspects for physical and visual quality requirements.
• Isolates and replaces faulty components.
• Sets up, operates, and adjusts test sets and auxiliary equipment.
• Proves tests and test sets.
• Troubleshoots and repairs test equipment/fixture problems.
• Performs reactive maintenance on electromechanical surface mount assembly equipment.
• Provides basic product technical data setup support for printed circuit boards, subassemblies, or other related company products.
• Reads and analyzes schematic diagrams, Bills of Materials, Component Data, Engineering Change Order and similar technical information.
• Inspects for standard quality requirements.
• Maintains records for technical product data availability, data integrity, and data completeness.
• Schedules and performs preventative maintenance.
• Maintains records for equipment availability, failure analysis and maintenance.
• Maintains equipment spare parts database.
• Tracks spare parts usage and maintains inventory of equipment spare parts.
• Helps move, install, set up and refurbish equipment.
• Knowledge/Skills/Competencies.
• Engineering Foundation Competencies.
• Knowledge of mechanical design methods, procedures and processes.
• Knowledge of and ability to use MCAD systems.
• Knowledge of SMT placement equipment, specifications and operation.
• Basic knowledge of computer programming.
• Knowledge of tooling design and vendor fabrication of mechanical assemblies.
• Strong math skills.
• Ability to manipulate textual data, edit files and use E-Mail with HP-UX tools.
• Ability to compile data, compute quantities, determine materials needed, and prepare cost estimates.
• Knowledge of quality standards.
• Ability to effectively communicate with a variety of internal customers.
• Knowledge of electrical, electromechanical and pneumatic systems and principals of operation.
• Knowledge of production operations and operator responsibilities.
• Ability to analyze equipment and systems, troubleshoot problems and make appropriate repairs.
• Knowledge of digital electronics and repair methodologies.
• Knowledge of personal computers and Windows applications.
• Knowledge of quality standards.
• Ability to effectively communicate with a variety of internal customers.
• Physical Demands.
• Duties of the position are performed in a manufacturing environment with frequent exposure to noise, dust, chemicals, operating machinery, temperature extremes, hazardous substances, etc.
• Duties require extended periods of sustained visual concentration on detailed documentation and product assemblies.
• Duties of the position require periodic light physical effort and exertion including prolonged repetitive motions, sitting in confined workspaces, using tools and equipment, and moving and handling materials.
• Duties may require periodic heavy manual effort including lifting objects over 20 pounds.
• Typical Experience.
• Zero to two years of relevant experience.
• Typical Education.
• Two or three year community college diploma in a related field, or an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

Data Entry

Job type:

Full-time

• Design, develop, and implement new manufacturing processes to support customer products.
• Develop application software and tooling for a comprehensive set of complex machines and mechanical process steps within a manufacturing sector.
• Implement plan and lead the assessment of the capability of machines and process applications using Design of Experiments and statistical methods across the full manufacturing process, ensuring maximum utilization of critical resources, maximum through ...
• Lead disciplined process for solving complex single stage or multistage product, process, component, and related problems that affect the efficient operation and/or manufacture of products through the full manufacturing process.
• Initiate and lead the assessment and provide feedback to product designers on suitability of designs for manufacturability.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Mechanical Engineering

Job type:

Full-time

• Responsible for understanding the customer s technical roadmap and identifying and managing all new customer-specific process development projects.
• Manage technical aspects for all new customer-specific process development projects.
• Develop the scope of all technical work, coordinate the team, direct work assignments and assist with problem resolution for the full customer product life cycle support for all manufacturing technical issues related to the customer s product(s) from product conception to product obsolescence.
• Evaluate potential manufacturing impact for each design concept.
• Responsible for the best practice standard development, participate in Industry organizations for developing the standards and provide training and application support globally.
• Set yearly plans and goals for their department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Defines process problems that lead to throughput or quality issues, evaluates cause of problem, implements solutions to stabilize processes, evaluates results.
• Acts as the focal point for all product-related technical issues.
• Interacts with customers to resolve problems and increase the quality and yield of the product and/or the product data release process.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 7-10 years of working experience in new project and engineering management.
• Typical Education.
• Bachelor s Degree in Mechanical Engineering or related fields.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Industry trends, Project Management, Excel

Job type:

Full-time

• Manages engineering projects for development and production.
• Responsibilities include providing project definition and metrics, resource allocation, budget development and management, schedule management, task prioritization, contingency planning, project and program review.
• Communicates progress and results to senior management and customers.
• Works with Corporate and other Technical Managers to develop and maintain a process for determining which projects to staff based on customer demands and industry trends.
• Manages equipment selection, chemical computability, Design For Manufacture, process transfers, and qualification and reliability methodologies.
• Duties may be performed at the on-site at a customers location.
• Develops solutions based upon existing knowledge, and leveraging industry and other sites capabilities.
• Responsible for coordinating activities with customer and other sites to ensure maximization of resources and efficiencies across the NPI process.
• Responsible for overall management and success of the NPI function and its ability to transition and support products and processes to manufacturing.
• Project management and coordination of activities of a technical nature involving the analysis and modification of manufacturing methods to improve cost of manufacturing or support services, mfg.
• Processes, efficiencies, technical capabilities, engineering support, or for unique customer requirements.
• Project management may take place within the entire department, a sub-team within the department, across a Business Unit, etc.
• Knowledge/Skills/Competencies.
• Engineering Foundation Competencies.
• Understanding of competitor's pricing models.
• Knowledge of competitive benchmarks for pricing of specific product types.
• Knowledge of mechanical parts manufacturing processes.
• In-depth knowledge and understanding of manufacturing processes and equipment.
• In-depth knowledge of quality improvement practices and techniques.
• Ability to plan for and coordinate a wide variety of resources to meet production quality and quantity metrics.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train, coach and motivate a diverse group of employees to achieve high production levels within tight time deadlines and in a highly dynamic manufacturing environment.
• Ability to use some or all of the following PC applications: Word, Lotus Notes, Excel, Powerpoint.
• Excellent negotiation, problem resolution and project management skills.
• Ability to plan strategically for the coordinated delivery of a variety of materials.
• Strong analytical and statistical skills.
• Typical Experience.
• Nine plus years of relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience. Advanced studies in Business/Operations/Technology are recommended.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Assembly, English

Job type:

Full-time

• New product leader and co-ordinate..
• Communicate to customer for EC related issue and NPI activities..
• Co-ordinate with concern team to meet the customer product's requirements..
• Co-ordinate with concern team to Process BOM release in Matrix system..
• Generate ECN history of Optical Module and PCBA for traceability..
• Assign indirect mat'l and maintain indirect mat'l AVL..
• Process Change Management system..
• Manage the shop floor BOM for support production build..
• Cost reduction..
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Optical Components process assembly, splicing, die attach, alignment or PCBA process assembly experience in SMT, wave soldering and mechanical assembly..
• Knowledge in NPI, new product, new process, BOM.
• Good leadership and self-motivation.
• Good in English and communicate well..
• Typical Education.
• Bachelor or higher in Electronics or Mechanical Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

2 years required

Skills:

Market Research, Research, Business Development, English

Job type:

Full-time

• Work closely across industries with client business team.
• Review and evaluate current state of Supply Chain and Operations by using a robust set of data analytics and assessment tools.
• Identify gaps in client operations and recommend resolutions for further improvements.
• Design deliverables content to reflect client needs and strive to develop deliverable quality through verification and validation of results.
• Manage engagement to ensure the project is on track and all milestones are met under supervision from project manager, and report to client s top management.
• Conduct market research, feasibility study, and business development.
• Support project manager/ team leader in executing projects and other tasks.
• Thai nationality only.
• Bachelor or Master of Engineering (Industrial, Mechanical, or Production), BBA, or Supply Chain related.
• 0 - 2 years of professional experience with at least one of the following areas: Sales and Operations Planning, Procurement, Manufacturing, or Distribution. New Graduated are also welcome!.
• Preferably consulting professional experience either through internship or past professional background.
• Hardworking, self-motivated individual, and team player with excellent interpersonal skills.
• Strong analytical, problem solving, and managerial skills.
• Able to work under pressure, aggressive timeframe, and consulting lifestyle.
• Very good Thai and English communication skills.
• Preferably Lean Operations experience, Six Sigma educated, and/or TPS practiced.
• Equipped with MS office, and capable of analysis applications is advantageous.
• Preferably experience in VBA.
• Ability to travel to upcountry or abroad is required.
• If you are looking for a challenging job with dynamic fast-paced environment, we invite you joining our hands and building a better working world!.

Skills:

Sales, Marketing Strategy, Business Development, Laos, English

Job type:

Full-time

• Responsible for Professional Installed (Project) & Commercial (Distribution) sales, coordination of all sales activities with customers to reach the sales targets of Thailand and Laos.
• Growing business through channel expansion, distribution and geographical coverage within Thailand & Laos.
• Perform market & competitor analysis and product positioning.
• Propose, design and explain a complete Installed sound system to End User, Consultants and customer.
• Develop Distribution business, channel expansion, marketing strategy online/offline for commercial sound.
• Provide technical assistant for customers to support design and tender clarification.
• Conduct presentation of Installed sound system to end user, consultant, customer and during events.
• Qualifications Bachelor s degree in Electrical, Mechanical, Electronic Engineering or other related field.
• At least 5 years sales related experience in the Prosound Industry with proven sales record.
• Experienced in Prosound Industry is an advantage.
• Experienced in project business, channel management, distribution, marketing strategy for online/offline and business development.
• In depth knowledge of local markets, channels and competitors.
• Able to work independently to achieve the sales target.
• General project sales skills in Installed sound system Project.
• Fluency in both spoken and written English.
• Additional InformationBy choice, we are committed to a diverse workforce and are an equal opportunity employer. Robert Bosch welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates taking part in the selection process.

Skills:

Contracts, Compliance, Procurement, English

Job type:

Full-time

• Plan and develop operational programs, procedures and schedules assuring technical and cost justification with SSHE consideration.
• Design well intervention in accordance with requirements from Assets; and with regard of well integrity.
• Contribute to preparation of budget and the Authorization for Expenditure (AFE) including follow-up and control of expenditures.
• Coordinate with Workshop function in preparation of subassemblies, equipment and tools required for all related operations.
• Coordinate with Superintendent/Supervisor, Well Operations and contractors to ensure preventive maintenance of operating units/equipment is properly carried out as per agreed schedule.
• Coordinate with Superintendent/Supervisor, Well Operations during preparation of operations and execution phase.
• Manage and control the operations, and establish logistical needs in collaboration with concerned personnel/parties.
• Serve as Contract Holder to initiate bidding and/or negotiating for third party services as well as prepare and manage drilling contracts in compliance with Company's Procurement Process and SSHE Contractor Management Standard.
• Assist, advice, and support concerned parties on technical/operational aspects regarding to solve the problems and avoid delays in work schedule.
• Prepare end of well reports and capture lessons learnt at the end of the campaign or after troubleshooting for operations improvement.
• Supervise, coach and mentor the junior engineers on technical and operational issues.
• Review technical analysis/justification of recommendation to ensure proper engineering design and operation execution.
• Ensure compliance with all applicable legal and company s SSHE MS requirements in all work under responsibility.
• Professional Knowledge & Experiences.
• Bachelor s Degree of Engineering in Process/Petroleum/Mechanical or education certificate with 5-10-years experience in well intervention.
• Knowledge of open-hole electric line logging and services or cased-hole electric line, pipe recovery and severing services with explosive during drilling operations, managing the explosive licenses, basic drilling operations and activities, other well intervention, etc.
• Well Control certificate for Well Intervention or drilling operations.
• Knowledge of contractual terms and conditions, contracts management, detailed operational structure, decision making process, and company/industry standards and practices, well integrity, and plug and abandonment.
• Good command of written and spoken English.
• Offshore experience.
• Contract management skills.

Experience:

7 years required

Skills:

Nutrition, Product Development, Project Management

Job type:

Full-time

• Mainly responsible for process development and product qualifications for infant, children and adult nutrition products for Asean and South Asia manufactured at third party subcontractors and MJN plants.
• Responsible for process development, commissioning and qualification for equipment in R&D technology centers.
• Make use of internal and external technical resources, perform technical assessments, experiments and testing, implement process development from product concept, formu ...
• Prepare technical documents necessary for each phase of the development from initiation stage, process validation to post launch and handover for product maintenance after launch.
• Interactions with cross-functions include market, regional and global R&D functions of Regulatory Affairs, Product Development, Process Engineering, R&D Operations, Analytical Science, Sensory Teams, Packaging Managers, R&D Technical Centers Teams, Project Management, Quality Managers, Quality Laboratory Staff, Compliance Managers, Procurement, Finance, Supply Chain, Marketing, Suppliers, Technology Providers, Research Institutions, third-party service providers, R&D technicians/consultants/temp staff (leased).
• The experience we're looking for.
• B.S. in Engineering, such as and not limited to, Chemical Engineering, Food Engineering, Biochemical Engineering, Mechanical Engineering, or any other Engineering related course. Master s Degree is an advantage.
• At least 7 years of experience in food/pharmaceutical/beverage manufacturing industry in R&D, QA or production functions with at least 5 years of those spent working in aspects of manufacturing process, process engineering, or process development.
• At least 3 years of experience as Process Engineer operating key process technologies related to food and beverage manufacturing such as dry powder blending, powder conveying, liquid processing and spray drying; experience in any one of aseptic process and packaging, membrane filtration and separation technologies, enzymatic and hydrolysis processes is an advantage.
• Demonstrate working knowledge on key unit operations and process technologies used in food and beverage industry and its relationship to overall product functionality and quality.
• Demonstrate application of mass balance, heat transfer, process flow, process specification of one or more technology platforms.
• Applies statistical design concepts towards the execution of process studies.
• Demonstrate skill creating process flow diagrams and related engineering diagrams.
• Demonstrates understanding of technical and industry practices, manufacturing industries, relevant unit operations necessary for successful qualification of new and improved processes.
• The skills for success.
• Business Strategy, Task Execution Under Pressure, Makes strategic Business Decisions, Business Accumen, Commercial Awareness, Objective Setting, Accountability, Adaptability, Consumer Insight, Creative Direction, Consumer Needs, R&D, Product Lifecycle Management, Change Leadership, Intellectual Property, Business Partnership, Collaboration and partnership building, Collaborator, Relationship Management, Adapt to changes in technological development plans, Product vision and strategy development, Ability to challenge the status quo and propose improvement, Innovation Processes, Predictive Analytics, Digital transformation for R&D, Quality and Manufacturing.
• What we offer.
• With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way.
• We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy.
• Equality.
• We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you.
• All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law.