Filter Jobs

Experience:

5 years required

Skills:

Problem Solving, Linux, Data Entry

Job type:

Full-time

• Support Hardware and Software Team in bring up and validation of Networking, Storage, and Server products during NPI phase per Hardware validation Test Plan.
• Setup the and manage Test Rack, Test equipment and Unit Under Test for hardware validation.
• Work with cross-functional teams to troubleshoot and address any hardware issues identified during validation.
• Bachelors Degree in Electronic Engineering, Computer Engineering, Telecom Engineering or equivalent.
• 0-5 years of experience with hardware testing and validation.
• Familiar with electrical design tools such as Logic analyzer, Oscilloscopes.
• Familiar with common communication protocol such as I2C, SPI, DDR, PCIe, USB, Ethernet, SATA, NVMe.
• Hands-on lab debugging, diagnostic errors. Problem solving and corrective actions.
• Familiar with Linux environment and Ethernet protocol.
• Self-motivated with a strong multidisciplinary background.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Knowledge in Analog circuit design and Digital circuit design.
• Knowledge in Electronic component.
• Knowledge electrical design tools such as Logic analyzer, Oscilloscopes.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 0-3 years of experience with hardware Design.
• Typical Education.
• Bachelors Degree in Electronic Engineering, Computer Engineering, Telecom Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

3 years required

Skills:

Electrical Engineering, English

Job type:

Full-time

• วางแผนและควบคุมงาน.
• งานทดสอบ.
• วิศวกรไฟฟ้าจะถูกส่งไปทำงานในไลน์ผลิตก่อน 3 เดือนเพื่อให้เข้าใจขั้นตอนการทำงานในแผนกผลิต และรู้จักกับวัสดุอุปกรณ์ภายในโรงงาน ก่อนจะถูกแยกออกเป็นวิศวกรแต่ละแผนก ได้แก่ 1.บริหารงานโครงการ 2.ออกแบบประเมินราคา 3.Support Sales.

Skills:

Business Development, Procurement

Job type:

Full-time

• Engineering role in business development, project development, and project execution phases from inception to commercial operation.
• Performing technical feasibility study, technical due diligence study, and preparing technical inputs/proposals for business development of projects.
• Conceptual design and operation philosophy of the Hydro Power Plant and interconnecting transmission lines and substations.
• Pre-construction development of the projects: Defining scope and specification of work, in order to procure engineering, procurement, and/or construction works, and biding and evaluating for engineering, procurement, and/or construction works.
• Execution phase of the projects: Reviewing electrical engineering document e.g. power system study, single line diagrams, schematic & wiring diagrams, calculations, specifications and datasheets and reviewing, coordinating, controlling, and following up works with contractors in order to ensure that the engineering, procurement and construction works are in accordance with the project specification, on time and on budget, in accordance with the objective of the project.
• Coordinating with team and providing supports on relevant issues in order to complete project effectively.
• Job Qualifications.
• Bachelor s degree or higher in Electrical Engineering.
• Minimum 6-8 years experience in project engineer and/or engineering design.
• Experience in hydropower projects, transmission and distribution system would be an advantage.
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/work upcountry and abroad.
• Goal-Oriented, Unity, Learning, Flexible.

Skills:

Business Development, Project Management

Job type:

Full-time

• Engineering role in business development, project development, and project execution phases from inception to commercial operation.
• Performing technical feasibility study, technical due diligence study, and preparing technical inputs/proposals for business development of projects.
• Conceptual design and operation philosophy of Waste to Energy, Power Plant and interconnecting transmission lines and substations.
• Pre-construction development of the projects: Defining scope and specification of work, in order to procure engineering, procurement, and/or construction works, and biding and evaluating for engineering, procurement, and/or construction works.
• Execution phase of the projects: Reviewing electrical engineering document e.g. power system study, single line diagrams, schematic & wiring diagrams, calculations, specifications and datasheets and reviewing, coordinating, controlling, and following up works with contractors in order to ensure that the engineering, procurement and construction works are in accordance with the project specification, on time and on budget, in accordance with the objective of the project.
• Coordinating with team and providing supports on relevant issues in order to complete project effectively.
• Job QualificationsBachelor s degree or higher in Electrical Engineering or related fields.
• Minimum 6-8 years experience in project engineer especially in EPC.
• In-depth knowledge of solar components and solar project development.
• Project management capability. Solar components sourcing.
• Familiar with local grid code for solar plants.
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/ work upcountry and abroad.
• Goal-Oriented, Unity, Learning, Flexible.

Skills:

Assembly, Procurement, Quality Assurance

Job type:

Full-time

• Mechanical design of fiber-optic pump packages and components.
• Mechanical design of fixture/tooling and equipment for fiber-optic component manufacturing.
• Generate conceptual design, layout, prototyping, bill of materials, piece part and assembly drawings.
• Working closely with optical, process and device engineers for design optimization and NPI (New Production Introduction).
• Interact with vendors for piece parts specification, procurement, and quality assurance.
• Select vendors and complete first article qualification.
• Perform component qualification and generate reports.
• Document engineering reports, engineering drawings, and equipment design specifications.
• We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job type:

Full-time

• Prepare detailed analysis of manufacturing & operations processes, including site visit, client interviews, current flow validation and development of automated flow charts detailing process steps, hand offs and decision points.
• Develop MES/MOM strategies following clients needs.
• Design and support the implementation & deployment of MES/MOM and automation solutions for manufacturing clients across industries.
• Lead requirements gathering, system design, configuration, testing and commissioning of MES/MOM systems (e.g., Siemens Opcenter, Rockwell FactoryTalk, SAP DM or DELMIA Apriso).
• Provide technical on-site solution support to clients, answering complex questions on function and usage of product.
• Serve as primary support liaison between company and clients, conveying client feedback to solution development, including the integration between MES/MOM and ERP, SCADA, PLCs and other shop-floor systems.
• Provide support in defining system architecture, data flow and automation logic between IT and OT layers.
• Maintain a high level of enterprise competence, coordinate development and assignments, including identifying, capturing and sharing MES/MOM expertise.
• Contribute to MES/MOM documentation, training materials and user acceptance testing.
• Stay updated on emerging technologies in MES/MOM, smart manufacturing, edge computing and AI in operations.
• Support practice development activities.
• Support sales activities and bids
• Bachelor s Degree in a related engineering discipline; electrical, mechatronics, mechanical, industrial or production engineering.
• Minimum 7 years relevant MES/MOM design & implementation, preferably with consultancy and hands-on experience (e.g., Siemens Opcenter, DELMIA Apriso, etc.).
• Good understanding of automation, SCADA and PLC systems.
• Strong industry knowledge in either continuous or discrete manufacturing.
• Experience in the system integration between MES-ERP-OT systems, preferably together with APS and WMS (e.g., OPC, MQTT, API or middleware).
• Experience in creating process for workload automation, mainframe reports and reconciliation, including troubleshooting and analyzing workload automation processes.
• Experience in IoT Manufacturing, Manufacturing Excellence and Digital Workforce.
• Familiarity with digital twin, predictive maintenance or data analytics for manufacturing.
• Exposure to robotics integration or industrial automation networks (Profinet, Modbus, etc.).
• Knowledge of Lean / Six Sigma principles or shop-floor optimization methodologies.
• Experience in Design Thinking and Agile approaches with ability to ensure the project success on time and within budget.
• Ability to work with shop floor people at client sites.
• Strong skills in developing and presenting clear and concise solution briefings.
• Exceptionally strong verbal and written communication skills with both Thai and English required.
• Good interpersonal and organizational skills.

Job type:

Full-time

• Prepare detailed analysis of engineering and manufacturing processes and data, including site visit, client interviews, current flow validation and development of solution architectures detailing process steps, hand offs and decision points.
• Identify engineering and manufacturing cases for improvement and value proposition related to the cases for clients.
• Analyze value business cases for engineering and manufacturing clients.
• Gather, validate and document engineering and manufacturing requirements.
• Define future state scenarios and draw user journeys.
• Provide on site solution support to clients, answering complex questions on function and usage of product.
• Serve as primary support liaison between company and clients, conveying client feedback to solution development.
• Assist in data collection, system configuration, and troubleshooting for engineering and manufacturing projects.
• Prepare functional & technical documents, reports and diagrams to support project execution and client deliverables.
• Map the board room to shop floor approach and processes of clients.
• Engage specialists in ecosystem as needed to ensure the success of sales opportunity and project delivery.
• Continuously develop technical and consulting skills through hands-on project experience and structured training.
• Support practice development and sales activities.
• Bachelor s Degree in a related engineering discipline industrial, production, mechanical, electrical, mechatronics or chemical engineering.
• Good understanding of the Industry 4.0 transformation of engineering and manufacturing.
• Good understanding of Smart Factory and Digital Engineering contexts.
• Familiarity with IoT, digital twin and data analytics for engineering and manufacturing.
• Familiarity with business value case analysis for engineering and manufacturing.
• Experience in Design Thinking and Agile approaches with ability to ensure the project success on time and within budget.
• Ability to work with shop floor people at client sites.
• Strong skills in developing and presenting clear and concise solution briefings.
• Exceptionally strong verbal and written communication skills with both Thai and English required.
• Good interpersonal and organizational skills.

Job type:

Full-time

• Prepare detailed analysis of manufacturing & operations processes, including site visit, client interviews, current flow validation and development of automated flow charts detailing process steps, hand offs and decision points.
• Identify manufacturing & operations cases for improvement and value proposition related to the cases for clients.
• Develop control strategies and PLC programs following clients needs.
• Recommend and apply automation and automated system implementation to improve production efficiencies, reduce costs, enhance employee safety, and to assure consistent product quality.
• Provide technical on-site solution support to clients, answering complex questions on function and usage of product.
• Serve as primary support liaison between company and clients, conveying client feedback to solution development.
• Maintain a high level of enterprise competence, coordinate development and assignments, including identifying, capturing and sharing manufacturing & operations expertise.
• Map the board room to shop floor approach and processes of clients.
• Lead engineering and manufacturing workstream by delivering accountable tasks on time, within budget and in line with client expectations.
• Engage specialists in ecosystem as needed to ensure the success of sales opportunity and project delivery.
• Support practice development activities.
• Support sales activities and bids
• Bachelor s Degree in a related engineering discipline; electrical, mechatronics, mechanical, industrial or production engineering.
• Minimum 7 years relevant Instrumentation, Control & Automation design experience, preferably with consultancy experience.
• Good understanding of the Industry 4.0 transformation & Digital Transformation of manufacturing and operations.
• Strong industry knowledge in either continuous or discrete manufacturing.
• Experience in analog and digital design, including system integration conceptual knowledge.
• Experience in creating process for workload automation, mainframe reports and reconciliation, including troubleshooting and analyzing workload automation processes.
• Experience in IoT Manufacturing, Manufacturing Excellence, Manufacturing Execution System and Digital Workforce.
• Experience in Design Thinking and Agile approaches with ability to ensure the project success on time and within budget.
• Ability to work with shop floor people at client sites.
• Strong business acumen with the ability to understand business issues and identify business opportunities and value propositions.
• Strong skills in developing and presenting clear and concise solution briefings.
• Exceptionally strong verbal and written communication skills with both Thai and English required.
• Good interpersonal and organizational skills.

Experience:

3 years required

Skills:

Electrical Engineering, English

Job type:

Full-time

• As the authorized distributor of Arteche-world leader in MV & HV instrument transformers and other international brands, we specialize in advanced technologies, With extensive engineering knowledge, project management and services expertise,.
• Our company is looking for an experienced and responsible Project Engineer to support our ongoing projects.
• PROJECT ENGINEER POSITION.
• Project Planning & Coordination - Plan, schedule, and coordinate engineering activities to meet project objectives.
• Technical Support - Provide technical expertise to ensure proper design, installation, and operation of systems or equipment.
• Documentation & Drawings - Prepare and review technical drawings, specifications, and reports.
• Site Supervision - Monitor site work to ensure it meets design, quality, and safety standards.
• Problem Solving - Identify and resolve technical issues during the project.
• Communication - Coordinate between clients, contractors, and internal teams.
• Budget & Schedule Control - Ensure the project is completed on time and within budget.
• Testing & Commissioning - Oversee inspection, testing, and commissioning of systems before handover.
• Compliance - Ensure all work complies with relevant codes, standards, and safety regulations.
• Bachelor s degree in Electrical Engineering or related field.
• Minimum 2-3 years of experience in Project Engineer, Project Coordinator or related field (Fresh graduates are welcome to apply).
• Experience with EGAT, PEA, MEA, Government agencies, Electrical panel builder, Contractors or Consultants will be considered an advantage.
• Good personality and professional appearance.
• Strong communication, presentation, and negotiation skills.
• Excellent interpersonal skills with the ability to build strong client relationships.
• Proficiency in English (both written and spoken).
• Good analytical and problem-solving skills.
• Leadership ability and experience in management.
• Proficiency in MS Office and familiarity project tools is an advantage.
• Compensation & Benefits.
• Salary: Based on experience and mutual agreement.
• Performance bonus.
• Overseas travel allowance.
• Car fuel allowance.
• Annual leave and public holidays.
• Annual health check-up.
• Training and career development opportunities.

Skills:

Automation, Electrical Engineering, Mechanical Engineering

Job type:

Full-time

• Design and develop automation solutions for HVAC, lighting, access control, and energy management systems.
• Integrate IoT devices and sensors into building infrastructure for real-time monitoring and control.
• Collaborate with cross-functional teams including MEP engineers, IT, and facility managers.
• Develop and maintain dashboards and analytics platforms for building performance data.
• Ensure cybersecurity and data integrity of connected systems.
• Conduct site assessments and feasibility studies for automation upgrades.
• Troubleshoot and optimize existing BAS and IoT systems.
• Stay updated with emerging technologies and standards in smart building systems.
• Bachelor s degree in Electrical Engineering, Mechanical Engineering, Computer Engineering, Control Engineer,Mechatronics Engineer or related field.
• Experience with protocols such as BACnet, Modbus, KNX, MQTT, or Zigbee.
• Familiarity with PLCs, SCADA systems, and BMS platforms.
• Knowledge of cloud platforms (e.g., AWS, Azure) and edge computing.
• Programming skills in Python, JavaScript, or similar languages are a plus.
• Strong problem-solving and communication skills.

Experience:

No experience required

Skills:

Electrical Engineering, English

Job type:

Part-Time

• Design, develop and implement process automation system for manufacturing..
• Implement and suppport electrical, automation and instrument system in manufacturing (PLC,DCS,Loop test)..
• Collaborate with cross-function team (Engineering, Production, IT) to integrate automation solution..
• Ensure projects are completed on time, within budget and in compliance with safety and quality standard..
• Design, develop and implement process automation system for manufacturing..
• Welcome New Graduated!.
• Good command in English and Computer skills..
• Good Problem-solving and Analytical skills..
• Situational Adaptability..
• Self-motivated, proactive and eager to learn new technology..
• Able to work in upcountry..

Experience:

7 years required

Skills:

Assembly, Data Entry, Electronics

Job type:

Full-time

• Review process, product and identify the new technology, new component, new process. Then provide a solution and development for the new component/ new process/ new technology for PCBA.
• Generate the library history of stencil design and PCBA for traceability.
• Work closely with the design team, customers, supplier, and CTH internal team..
• Design tooling and develop the process to support the new technology or new process of PCBA assembly..
• Work with CFT and customer on NPI development, process validation with FA lab technique to make successful transfer from NPI to mass production..
• Other duties as assigned.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• Minimum 7 years relevant experience..
• Typical Education.
• Bachelor degree of Engineering or equivalent of Electronics/Electrical, Telecommunication, computer or related fields..
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

15 years required

Skills:

Research, Electronics, Data Entry

Job type:

Full-time

• Design, develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate with other engineers including reviews of their work.
• Review and interpret customer documentation, conduct appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Recommend system modifications.
• PCB layout Design, Schematic by using Allegro Candence Software.
• Participate in HW/Layout review.
• PCB stack up review.
• Work with the Electrical and Mechanical Engineers to ensure the design meets all requirements from an electrical performance and mechanical enclosure perspective.
• Create and export manufacturing files ( drawing, gerber ) and review DFM/DFT with Manufacturing team.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Bachelor s degree in Electronics Engineering, or equivalent experience.
• 10+ years experience of PCB high speed layout design using industry standard PCB design.
• Experience with using Allegro Cadence software.
• Experience with high current density designs.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 10 to 15 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

2 years required

Job type:

Full-time

• Date: 17 Sept 2025 Location: Chonburi, Sriracha (ชลบุรี), Thailand, 20230
• ROLE & RESPONSIBILITY.
• To plan, organize, manage, and execute Electrical support or maintenance to ensure to obtain maximum reliability, integrity and availability of equipment and minimize impact of process operation and performance as well as the efficiency of equipment to be improved or maintained at maximum.
• EXPERIENCE.
• At least 2-5 years experience in Project Engineer and/or Maintenance in oil industry or petrochemical industry is advantageous.
• EDUCATION.
• Bachelor in Electrical or related field.

Experience:

5 years required

Skills:

AutoCAD, Visio, English

Job type:

Full-time

• Responsible for planning preventive maintenance schedules for the electrical system.
• Responsible for coordinating and managing vendors and suppliers to preventive maintenance and payment plans.
• 2nd Level support to Data Center Operation (FOC), on site to solve Incident and Problem management.
• 2nd Level support to engineer team all site, Data Center (TT1, TT2, MTG, BNA).
• To create & update reports and documents to comply with ISO 20k, 22k, 27k, 50k & TCOS standards.
• Review PUE, cost saving energy and report.
• Measured Efficiency air system and record annual report.
• Responsible for implementing Electrical such as MU, TR, MDB, GEN, UPS, RECT, BATT, ATS.
• Bachelor degree of Engineering, Electrical engineering or related field.
• More than 5 years of experience in maintenance of electrical systems such as RMU, TR, MDB, GEN, UPS, RECT, BATT, ATS: implement and support electrical systems in buildings or Data Centers.
• At least 1 years experience in designing electrical systems (such as RMU, TR, MDB, GEN, UPS, RECT, BATT, ATS). implement, and support for electrical systems in building.
• Able to use the program AutoCAD, Visio.
• Able to work as a team and work in and standby on call on holiday.
• Able to work overtime if required and a hotline arrives (Less than 1 hour on site from your home).
• Proficiency in English communication is beneficial for both reading and writing.
• Work Location: TrueIDC - Bangna Site (KM26).

Experience:

4 years required

Skills:

Electrical Engineering, Mechanical Engineering, Excel, English

Job type:

Full-time

• Supervise contractors who perform servicing or preventive maintenance.
• Perform limited maintenance tasks to include: filter changes, battery system PMs, and Rack PDU & Rack ATS replacements.
• Perform root cause analysis for operational issues.
• Troubleshoot facility and rack level events.
• Ensure all personnel on-site follow safety protocols.
• Work on-call and a rotating schedule as needed.
• Take daily operational readings and provide metrics reporting to senior engineers.
• Perform basic support concepts such as ticketing systems, root cause analysis, and task prioritization.
• Diverse Experiences
• AWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn t followed a traditional path, or includes alternative experiences, don t let it stop you from applying.
• Why AWS?
• Amazon Web Services (AWS) is the world s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.
• Inclusive Team Culture
• AWS values curiosity and connection. Our employee-led and company-sponsored affinity groups promote inclusion and empower our people to take pride in what makes us unique. Our inclusion events foster stronger, more collaborative teams. Our continual innovation is fueled by the bold ideas, fresh perspectives, and passionate voices our teams bring to everything we do.
• Mentorship & Career Growth
• We re continuously raising our performance bar as we strive to become Earth s Best Employer. That s why you ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.
• Work/Life Balance
• We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there s nothing we can t achieve in the cloud.
• BASIC QUALIFICATIONS.
• Associates Degree or Technical Degree in Electrical Engineering, Mechanical Engineering or relevant discipline.
• Fluent in English language, both written and spoken.
• 2+ working in a Data Center or Mission Critical Environment.
• PREFERRED QUALIFICATIONS.
• Bachelor s Degree in Electrical Engineering, Mechanical Engineering or relevant discipline.
• 4+ years of Data Center Operation Experience.
• Fundamental knowledge of network design and layout as well as low voltage (copper/ fiber) cabling.
• 2+ with Microsoft Excel, Word, and Outlook.
• Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you re applying in isn t listed, please contact your Recruiting Partner.

Experience:

1 year required

Skills:

DevOps, Automation, Electrical Engineering

Job type:

Full-time

• Equipped with security knowledge and done related projects in technical IT domains such as operating systems, networks, databases, cloud or solution development etc.
• Possess knowledge in assessing solution architectures at the planning and design level for security issues and vulnerabilities.
• Experience in practical security vulnerability remediation.
• Information Security domains - in particular one or more of the following: Cyber Program Management, Cyber Threat Management, Identity & Access Management, Data Protection, Privacy, Organisational Resilience. This experience should include both advisory, implementation and operation experience.
• Strong technical security skills in assessment, design, implementation, architecture, and program / project delivery and work across various delivery models, (Waterfall, Agile, DevOps).
• Implementation skill set for identity and access management platforms, security information and event management platforms, security automation and orchestration platforms, advance threat detection systems, endpoint protection systems, data leak prevention systems or network security devices.
• To qualify for the role you must have.
• A recognized university degree in Computer Science, Computer/Electrical Engineering, Information Technology or equivalent.
• Experience with a leading Security technology like Microsoft Security, Crowdstrike, Splunk and others would be a strong advantage.
• Creative, independent with good problem solving skills.
• Excellent communicator with strong analytical, interpersonal and writing skills.
• Candidates with minimum 10-15 years of relevant experience, including managing a team, will be considered for a Leadership role.
• Ideally, you ll also have.
• Industry related certification preferred (e.g. CISSP, CISA, CISM, SABSA, PRINCE2, TOGAF, ITIL).
• Solution Level Certifications, OSCP, CREST, GIAC would be advantageous, as well as penetration testing experience.
• Highly motivated individuals with excellent problem-solving skills and the ability to prioritize shifting workloads in a rapidly changing industry. An effective communicator, you ll be a confident team player that collaborates with people from various teams while looking to develop your career in a dynamic organization.
• What we offer.
• Continuous learning: You ll develop the mindset and skills to navigate whatever comes next.
• Success as defined by you: We ll provide the tools and flexibility, so you can make a meaningful impact, your way.
• Diverse and inclusive culture: You ll be embraced for who you are and empowered to use your voice to help others find theirs.
• If you can demonstrate that you meet the criteria above, please contact us as soon as possible.
• The exceptional EY experience. It s yours to build.
• EY | Building a better working world.
• EY exists to build a better working world, helping to create long-term value for clients, people and society and build trust in the capital markets.
• Enabled by data and technology, diverse EY teams in over 150 countries provide trust through assurance and help clients grow, transform and operate.

Skills:

Project Management, Financial Reporting, Accounting

Job type:

Full-time

• Responsible for understanding and implementing the customers technical roadmap and related process development projects.
• Lead and implement the development and release of the full manufacturing process for new customer products.
• Understand and provide feedback on customers technical requirements to team members and management.
• Responsible for developing and implementing costed and optimized feedback using Design for manufacturability (DFX) tools and processes, with the goal of reducing manufacturing cost and improving quality and reliability of product.
• Develop, plan and lead the assessment of the capability of process applications using Design of Experiments.
• Devise process controls and data collection strategies and evaluate complex data to assist with reporting yield, reliability and diagnoses to root causes failures impacting product quality.
• Ensure accurate and timely communication to management on critical technical and business issues.
• Set yearly plans and goals for the department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage/lead complex, multiple line engineering projects that may also involve other functions. Demonstrate solid understanding of the technical, financial and people aspects of the project. Able to create a project/change management plan and ensure that the project is delivered within the assigned time and budget. Ability to recognize project barriers and develop mitigation plans.
• Leadership - Demonstrate "People & Team Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning - Ability to create financial plans for your projects, align them internally with your line of management and other functions and externally if needed. Create project plans, profitability calculations, risk and sensitivity analysis, able to recognize barriers and mitigate profitability risks. Fully knowledgeable about internal and external financial reporting, accounting and tax requirements relevant to your area of expertise.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Typical Experience.
• 10+ years of work experience in PCB assembly manufacturing field.
• Typical Education.
• Degree or higher in Mechanical/Chemical/Electrical Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

4 years required

Skills:

Procurement, Electrical Engineering, Mechanical Engineering

Job type:

Full-time

• Establish performance benchmarks, conduct analysis, and prepare reports on all aspects of the critical facility operations and maintenance.
• Responsible for the on-site management of sub-contractors and vendors, ensuring that all work performed is in accordance with established practices and procedures.
• Manage relationship with third party Colocation providers and their facility staff.
• Responsible for the operation of and management of both routine and emergency services on a variety of critical systems such as: switchgear, generators, UPS systems, power distribution equipment, chillers, cooling towers, computer room air handlers, building monitoring systems, etc.
• Data Center capacity planning and reporting.
• Assist in the design and build out of new facilities.
• May assist in projects to increase current Facility efficiency.
• Work with IT managers and other business leaders to coordinate projects, manage capacity, and optimize plant safety, performance, reliability and efficiency.
• Deliver quality service and ensure all customer demands are met.
• Procurement for DCEO related expenditure.
• Responsible for asset and inventory management.
• Diverse Experiences
• AWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn t followed a traditional path, or includes alternative experiences, don t let it stop you from applying.
• Why AWS
• Amazon Web Services (AWS) is the world s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.
• Work/Life Balance
• We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why flexible work hours and arrangements are part of our culture. When we feel supported in the workplace and at home, there s nothing we can t achieve in the cloud.
• Inclusive Team Culture
• AWS values curiosity and connection. Our employee-led and company-sponsored affinity groups promote inclusion and empower our people to take pride in what makes us unique. Our inclusion events foster stronger, more collaborative teams. Our continual innovation is fueled by the bold ideas, fresh perspectives, and passionate voices our teams bring to everything we do.
• Mentorship and Career growth
• We re continuously raising our performance bar as we strive to become Earth s Best Employer. That s why you ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.
• BASIC QUALIFICATIONS.
• 4+ years of relevant work experience in maintaining electrical, mechanical, HVAC, fire systems experience in a data center or critical space facility.
• Ability to participate in a 24 x 7 rotating shift roster.
• Understanding of the electrical and mechanical systems used in a data center environment, including but not limited to DRUPS, Transformers, Generators, Switchgear, UPS systems, ATS/STS units, PDUs, Chillers, AHUs and CRAC units.
• PREFERRED QUALIFICATIONS.
• Bachelor s Degree in either Electrical Engineering, HVAC, Mechanical Engineering or relevant technical (military/trade school) degree and relevant experience in a critical environment.
• Understanding of the electrical and mechanical systems used in a data center environment, including but not limited to DRUPS, Transformers, Generators, Switchgear, UPS systems, ATS/STS units, PDUs, Chillers, AHUs and CRAC units.
• Experience in management of vendors/contractors performing construction, maintenance and upgrading works in large-scale critical environment.
• Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you re applying in isn t listed, please contact your Recruiting Partner.

Experience:

5 years required

Job type:

Full-time

• Assists in the set up and installation of building equipment to support manufacturing lines.
• Provides maintenance and repair of facilities systems and structures to support the efficient manufacturing and processing of products.
• Provides maintenance of facility grounds including manufacturing floor, office area, common areas, surrounding grounds and parking lots.
• Moves furniture, maintains office equipment, completes minor building systems repairs, completes minor construction projects, etc.
• Knowledge/Skills/Competencies.
• Ability to effectively communicate with a variety of internal customers.
• Knowledge of electrical, electromechanical and pneumatic systems and principals of operation.
• Basic knowledge of methods used in the routine maintenance and repair of office and manufacturing facilities.
• Basic knowledge of building operating systems.
• Ability to operate complex equipment (e.g., tractors, delivery trucks, etc.) and other machinery / equipment (e.g., pallet jacks, high-lift equipment, power tools, etc.) Proof of required operator s licenses and / or certifications.
• Ability to analyze equipment and systems, troubleshoot problems and make appropriate repairs.
• Knowledge of personal computers and Windows applications.
• Knowledge of quality standards.
• Ability to effectively communicate with a variety of internal customers.
• Physical Demands.
• Duties of the position are performed in a manufacturing environment with frequent exposure to noise, dust, chemicals, operating machinery, temperature extremes, hazardous substances, etc.
• Duties require extended periods of sustained visual concentration on detailed documentation and product assemblies.
• Duties of the position require periodic light physical effort and exertion including prolonged repetitive motions, sitting in confined workspaces, using tools and equipment, and moving and handling materials. Duties may require periodic heavy manual effort including lifting objects over 20 pounds.
• Typical Experience.
• Four to five years of relevant experience.
• Typical Education.
• Additional courses after High School, or an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.