เงื่อนไขการค้นหา

ทักษะ:

Recruitment, Electronics, Data Entry, Teamwork, Assembly

ประเภทงาน:

งานประจำ

• Develop and qualify new assembly processes: trials, parameters, tooling, process window and Cpk.
• Execute manufacturability POCs on the line against the success criteria set with HPS NPD.
• Evaluate new materials, adhesives, fasteners and assembly methods with the site and with suppliers.
• Be present through NPI builds: troubleshoot in real time, keep the build moving, and record what actually happened.
• Support conversion of a qualified process into the site's PFMEA, control plan and work instructions without losing content.
• Feed process capability data into the site capability matrix and the DFA and DFM rule sets.
• Raise Process Development Requests from the line back into HPS NPD.
• Support EHS and ergonomics assessment for new assembly processes and equipment. KPI:Process development and qualification reports with Cpk.
• POC execution records.
• material and method evaluation.
• build support and troubleshooting record.
• capability matrix input. Measured on: Process validated and qualified before PVT.
• POC slots used against committed.
• first pass yield on early builds.
• 4M readiness at build start. Knowledge/Skills/Competencies Six to twelve years in assembly process engineering on an electronics manufacturing site, with genuine new-process introduction experience. Willing to be on the floor through a build window and to write the report afterwards. Physical Demands Duties of the position are performed in a manufacturing environment with frequent exposure to noise, dust, chemicals, operating machinery, temperature extremes, hazardous substances, etc. Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required. Typical Experience Six to twelve years relevant experience. Typical.
• Education.
• Bachelor's degree in a related field, or an equivalent combination of education and experience. Educational requirements may vary by geography. Notes This.
• is not intended to be an exhaustive list of all.
• of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica, Inc. (NYSE: CLS; TSX: CLS) is a technology leader dedicated to driving customer success and market advancements. With deep expertise in design, engineering, manufacturing, supply chain, and platform solutions, Celestica enables critical data center infrastructure for AI, cloud, and hybrid cloud and advances technologies in high-growth markets. With a talented team and a strategic global network, Celestica helps its customers achieve competitive advantages. Today, Celestica delivers innovative supply chain solutions globally to customers in strategic two operating and reporting segments: Advanced Technology Solutions (ATS) and Connectivity and Cloud Solutions (CC): ATS: This segment serves customers in complex, regulated and high-reliability markets such as Industrial & Smart Energy, Aerospace & Defense, Semiconductor Capital Equipment, and HealthTech. It is engineering led, with deep expertise in design, manufacturing and lifecycle solutions. CCS: This segment focuses on high-performance technology solutions and services for the data center, serving hyperscalers, digital native customers and enterprises. Celestica's Platform Solutions offering provides innovative and customizable computing, storage and networking solutions enabling AI-driven growth. Built on a legacy of trust and performance, Celestica has earned its reputation by delivering results in complex and fast-changing markets. Celestica exceeds customer expectations by identifying trends and staying ahead of the curve. Backed by comprehensive capabilities and a global network across North America, Europe and Asia, Celestica helps customers gain competitive advantage with the quality, flexibility and resiliency they need to respond quickly to shifts in demand. Guided by a bold vision to accelerate market advancements, Celestica delivers innovative solutions and technologies that turn complexity into opportunity. Anchored in teamwork and commitment, Celestica strives to be the most trusted partner to its customers and colleagues worldwide. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Industrial Engineering, Project Management, Architecture, Automation, English

ประเภทงาน:

งานประจำ

• Responsible for leading business process design, workflow simplification, and managing end-to-end process transformation projects to enhance operational efficiency and user experience. This role focuses on discovering, analyzing, and documenting business processes using process mining tools to establish and maintain the enterprise Process Repository. To-Be workflows determining the appropriate process model, whether leveraging rule-based automation (RPA), generative/agentic AI capabilities, or retaining human-in-the-loop controls.
• Job Responsibilities* Process Mining & Repository Management: Utilize Celonis and process mapping methodologies to discover, map, and document As-Is processes, maintaining the enterprise Process Repository and identifying bottlenecks, redundancies, and optimization opportunities Process & Automation Feasibility Evaluation: Analyze process maturity and operational requirements to determine the optimal workflow approach evaluating whether a process is best suited for RPA, GenAI, Agentic AI, or requires Human-in-the-Loop governance. To-Be Process Design & Prototyping: Design streamlined To-Be processes, user flows, wireframes, storyboards, and interaction models to deliver intuitive, frictionless human-system workflows. End-to-End Process Project Management: Manage full project lifecycles (scope, timeline, resources, risks) and collaborate with IT and technical delivery teams for solution integration, workflow testing, and user acceptance testing (UAT). System Rollout & Change Management: Lead the deployment and configuration of sales enablement, retail, and internal process workflows across channels, ensuring smooth operational transition, user training, and process adoption. Requirement Engineering & Business Case Analysis: Gather user requirements and translate complex business pain points into detailed functional specifications, process flows, User Stories, and ROI-focused business cases for implementation teams.
• Bachelor's degree or higher in Industrial Engineering, Business Process Management, Information Technology, Business Administration, Systems Engineering, or a related field. At least 5-8 years of experience in Business Process Re-engineering (BPR), Process Design, Business Analysis, or Process Transformation Project Management. Proven track record in managing end-to-end process project lifecycles, process mapping/mining, requirement engineering, and evaluating automation/AI technology capabilities for business process improvements. Process Mining / Management: Celonis Certified Professional, Lean Six Sigma (Green/Black Belt), or BPMN Certification (High Advantage). Project Management / Agile: PMP, PMI-ACP, Certified Scrum Master (CSM), or equivalent (High Advantage). Technology & Automation: UiPath/RPA certifications or Business Analysis certifications (CBAP/CCBA) (Plus) Process Mining & Modeling: Hands-on experience with Celonis (or equivalent Process Mining tools like Signavio, ARIS) for process discovery, bottleneck analysis, and repository management. Process Architecture & Tech Evaluation: Strong capability to analyze processes and evaluate the right technology fit distinguishing between RPA (rule-based), GenAI/Agentic AI capabilities (unstructured data/reasoning), and Human-in-the-Loop (human approval/control). Language Proficiency: Proficient in English with confident communication skills in native-speaker environments. div.unify-button-container.unify-apply-now:focus, div.unify-button-container.unify-apply-now:hover{color:rgb(255,255,255) !important;}#body.unify div.unify-button-container.unify-apply-now:focus, div.unify-button-container.unify-apply-now:hover{background:rgba(214,30,18,1.0) !important;} Apply now // // jobDataHidden.primarySkills = [{"value":"Business Process Improvement","key":"b7a3fe52c311359cbb682f4c02743fac"}]; jobDataHidden.secondarySkills = [{"value":"Automation","key":"0d1adce18eb83acc9774141c8e65a171"}]; TRUE CORPORATION PRIVACY POLICY True Corporation Public Company Limited. All rights reserved. // // // // const jobAlertSpans = document.querySelectorAll("[data-testid=jobAlertSpanText]"); jobAlertSpans?.forEach((jobEl) => { jobEl.textContent = window?.jsStr?.tcjobresultscreatejobalertsdetailstext || ""; }); // //.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Industrial Engineering, Mechanical Engineering, Data Analysis, Electronics, Automation

ประเภทงาน:

งานประจำ

• Design and optimize production process routes based on product drawings and specifications.
• Select raw materials, plan processes (e.g., cutting, welding, assembly), and define equipment parameters.
• Lead DOE development to ensure stable mass production.
• Conduct DFM reviews for new products and provide manufacturability recommendations.
• Develop trial production plans, participate in trials, and resolve process-related issues.
• Process Documentation.
• Create and maintain standardized documents including SOPs, process flowcharts, PFMEA, and inspection standards.
• Ensure clarity in operational procedures and quality control points for consistent execution.
• Efficiency & Quality Optimization.
• Analyze current processes and apply lean tools (e.g., 5S, value stream mapping) and technical improvements.
• Reduce costs, shorten cycle times, and increase production capacity.
• Collaborate with quality teams to investigate and resolve process-related defects and inefficiencies.
• Cross-Functional Collaboration.
• Work with R&D to review product designs and promote Design for Manufacturability (DFM).
• Coordinate with supply chain to ensure raw material compatibility and resolve supplier-related issues.
• Support production teams with training on new processes and equipment.
• Partner with automation teams to review and validate automation solutions.
• Innovation & Cost Reduction.
• Stay informed on industry advancements (e.g., 3D printing, laser welding).
• Evaluate and implement new technologies to upgrade processes.
• Drive cost reduction through process optimization and alternative material usage without compromising quality.
• What your background should look like.
• Bachelor's degree or higher in Mechanical Engineering, Materials Science, Industrial Engineering, Electrical Automation, or related fields.
• Strong understanding of core manufacturing processes such as machining, electronic assembly, and heat treatment.
• Familiarity with production processes in industries like automotive, electronics, or machinery manufacturing.
• Proficient in interpreting technical drawings using CAD/SolidWorks.
• Skilled in data analysis using tools like Minitab, especially for defect root cause analysis.
• Knowledge of Lean Production and Six Sigma methodologies; experience in process optimization projects is a plus.
• Minimum 5 years of experience in process development or technical support within relevant manufacturing industries.
• Experience with high-speed cable equipment and related process requirements is preferred.
• Excellent problem-solving abilities to quickly identify and resolve process issues.
• Strong communication and coordination skills for cross-functional collaboration.
• High adaptability and learning agility to keep pace with new products and technologies.
• Competencies.
• SET: Strategy, Execution, Talent (for managers).

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Data Analysis

ประเภทงาน:

งานประจำ

Bachelor's degree in engineering. - At least 3 years of experience in process engineering, manufacturing, production improvement, or related areas. - Proficient in data analysis and problem-solving techniques. - Able to work under pressure and manage multiple projects simultaneously.

ทักษะ:

Industrial Engineering, Product Development, Recruitment, Electronics, Automation

ประเภทงาน:

งานประจำ

• Education.
• Bachelor degree in Mechanical, Process, Industrial, Electronics Engineer or related field. Notes This.
• is not intended to be an exhaustive list of all.
• of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Risk Management, Problem Solving, Data Analysis, English

ประเภทงาน:

งานประจำ

As Wafer Test Process Engineer you will be responsible to Develop/Transfer for Wafer Test process 2) Drive relevant Wafer Test Process Engineering KPIs for yield and quality indices to contribute to performance 3) Responsible to setup effective indicator, data reporting, monitoring and driving improvement in the area of responsibility 4) Accountable for 8D closure of deviation management system including customer feedback 5) Provide engineering support to manufacturing to execute timely disposition, methodical problem solving & risk management methods 6) Owner of technical document ...

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Product Development, Electronics, Automation, Leadership Skill, English

ประเภทงาน:

งานประจำ

TE Connectivity is seeking a Manager I, Manufacturing & Process Development Engineering (DAC) to lead a team of process development and automation engineers in Chonburi, Thailand. The role is responsible for developing manufacturing processes for DAC products, supporting new product introduction, driving process excellence, and coordinating with global manufacturing teams to ensure successful transition from development to mass production. Job Requirements Lead and develop a team of process development and automation engineers. Drive manufacturing process development aligned with L ...

ทักษะ:

Mechanical Engineering, Automation

ประเภทงาน:

งานประจำ

• Minimum.
• Bachelor degree or above in Optics, Optoelectronics, Electronic Engineering, Mechanical Engineering or related majors. Familiar with basic optical theories and professional knowledge, understand the working principle of optical modules, optical path transmission principles and fiber coupling mechanism. Possess practical hands-on experience in optical module coupling process, familiar with coupling equipment operation, fiber alignment adjustment, optical power calibration and related production proce ...
• Preferred.
• Rich working experience in high-speed optical module coupling process and mass production optimization. Experienced in analyzing complex coupling yield issues and leading process improvement projects. Familiar with optical testing instruments such as optical power meter, spectrum analyzer and insertion loss tester. Why Cisco? At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Marketing Strategy, Quality Assurance, Microsoft Office, Market Analysis, Problem Solving

ประเภทงาน:

งานประจำ

• Join Diversey's fast-growing Food Processing team as a Territory Account Manager, where you'll build strong customer relationships, drive sales growth, and deliver hands-on solutions across leading food processing and food manufacturing businesses. If you're passionate about making an impact, enjoy working independently, and have experience in the food processing industry this is your chance to grow with a global leader.
• Transform marketing strategy into operational sales plans to increase sales volumes ...
• What You'll Bring.
• to Us: Bachelor's degree in food science, food engineering, chemical, or related fields Minimum of 3 to 5 years of experience in sales within industrial sectors. Experience in Production, Quality Control (QC), Quality Assurance (QA), or sales in the beverage, dairy, alcohol, or food industries will be considered an advantage. Good interpersonal and communication skills, Solid demonstrated presentation skills Results-oriented with high sense of drive and urgency with a positive outlook. Ability to implement problem solving techniques in order to resolve customer issues and take corrective action. Ability to work independently as well as thrive in a cooperative work environment. Able to communicate in English with Proficient in Microsoft Office applications. What We Offer: Continuous professional development with many opportunities for growth. Access to a wide variety of internal and external training courses on our learning system. Competitive Salary and bonuses. Transportation allowance + fleet card. We understand that candidates will not meet every single desired job requirement. If your experience looks a little different from what we've identified and you think you can bring value to the role, we'd love to learn more about you. Be part of a high-growth company where your career can thrive. At Diversey - a Solenis Company, we understand that our greatest asset is our people. That is why we offer competitive compensation, and numerous opportunities for professional growth and development. So, if you are interested in working for a world-class company and enjoy solving complex challenges, consider joining our team.

ทักษะ:

Recruitment, Data Entry, Teamwork, Cloud Computing, SAP

ประเภทงาน:

งานประจำ

• Education.
• Bachelor degree or consideration of an equivalent combination of education and experience. Educational.
• Requirements may vary by Geography Notes This.
• is not intended to be an exhaustive list of all.
• of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica, Inc. (NYSE: CLS; TSX: CLS) is a technology leader dedicated to driving customer success and market advancements. With deep expertise in design, engineering, manufacturing, supply chain, and platform solutions, Celestica enables critical data center infrastructure for AI, cloud, and hybrid cloud and advances technologies in high-growth markets. With a talented team and a strategic global network, Celestica helps its customers achieve competitive advantages. Today, Celestica delivers innovative supply chain solutions globally to customers in strategic two operating and reporting segments: Advanced Technology Solutions (ATS) and Connectivity and Cloud Solutions (CC): ATS: This segment serves customers in complex, regulated and high-reliability markets such as Industrial & Smart Energy, Aerospace & Defense, Semiconductor Capital Equipment, and HealthTech. It is engineering led, with deep expertise in design, manufacturing and lifecycle solutions. CCS: This segment focuses on high-performance technology solutions and services for the data center, serving hyperscalers, digital native customers and enterprises. Celestica's Platform Solutions offering provides innovative and customizable computing, storage and networking solutions enabling AI-driven growth. Built on a legacy of trust and performance, Celestica has earned its reputation by delivering results in complex and fast-changing markets. Celestica exceeds customer expectations by identifying trends and staying ahead of the curve. Backed by comprehensive capabilities and a global network across North America, Europe and Asia, Celestica helps customers gain competitive advantage with the quality, flexibility and resiliency they need to respond quickly to shifts in demand. Guided by a bold vision to accelerate market advancements, Celestica delivers innovative solutions and technologies that turn complexity into opportunity. Anchored in teamwork and commitment, Celestica strives to be the most trusted partner to its customers and colleagues worldwide. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Mechanical Engineering, ISO 14001, ISO 9001

ประเภทงาน:

งานประจำ

Requisition I D: 940031 Store [[costCenterId]] Position: [[cust_EmpStatus]] Total Rewards: Benefits/Incentive Information If you've worn a pair of glasses, we've already met. We are a global leader in the design, manufacture, and distribution of ophthalmic lenses, frames, and sunglasses. We offer our industry stakeholders in over 150 countries access to a global platform of high-quality vision care products such as the Essilor brand, with Varilux, Crizal, Eyezen, Stellest and Transitions, iconic brands that consumers love such as Ray-Ban, Oakley, Persol and Oliver Peoples, as well ...

ทักษะ:

Industrial Engineering, Project Management, Microsoft Office, Purchasing, Budgeting

ประเภทงาน:

งานประจำ

• Responsibilities: (Main Activities) Manage a team of process engineers and technicians: allocate work, coach for performance, and ensure effective knowledge transfer. Drive process development activities including line layout, takt time analysis, cycle time reduction, process capability and control plans. Lead new product introduction activities for process readiness, trial builds and ramp to serial production; ensure handover to operations with appropriate training and documentation. Identify and implement continuous improvement projects (Lean, Six Sigma, Kaizen) to improve produc ...
• Bachelor's degree in Engineering (Mechanical, Manufacturing, Industrial or similar) or equivalent experience. Proven experience in process engineering within a manufacturing environment; prior experience in automotive or safety-critical manufacturing is an advantage. Knowledge of lean manufacturing, Six Sigma tools and continuous improvement methodologies. Experience with process capability analysis, SPC, root cause analysis and corrective actions. Strong project management skills with ability to manage multiple concurrent projects. Familiarity with machine/tooling specifications, commissioning and validation processes. Excellent communication and interpersonal skills; able to collaborate across functions and regions. Proficient in Microsoft Office and engineering tools; experience with CAD, PLC or process simulation tools is desirable. English fluency; local language skills where the role is based are beneficial. Specific.
• Demonstrable experience leading teams through new line launches and sustaining serial production. Track record of delivering measurable process improvements (productivity, quality, cost reduction). Ability to travel between sites as required for launches and supplier support. Working Conditions: Base location at the plant with regular presence on the production floor. Occasional extended hours during launches or critical production recovery activities. Equal Opportunity: We are committed to a diverse and inclusive workplace and encourage applications from all suitably qualified people, irrespective of gender, ethnicity, disability, sexual orientation, religion or age.

ทักษะ:

Electrical Engineering, Recruitment, Teamwork, Cloud Computing

ประเภทงาน:

งานประจำ

• Develop and qualify new SMT processes: paste, placement, reflow, inspection and rework, with process window and Cpk.
• Own the technical resolution of advanced spacing, mixed VIPPO on both sides, and the associated rework capability.
• Execute manufacturability POCs on the SMT line against agreed success criteria.
• Evaluate new SMT equipment, materials and inspection technology with Roadmapping and Advanced Manufacturing.
• Support NPI builds through SMT: troubleshoot defects, drive yield recovery and record the evidence.
• Feed SMT capability data into the capability matrix and directly into the DFM rule set.
• Support the site in converting the qualified process into PFMEA, control plan and work instructions. Knowledge/Skills/Competencies SMT process development and qualification reports with Cpk.
• advanced spacing and mixed VIPPO capability evidence.
• POC records.
• equipment and material evaluation.
• capability matrix and DFM rule input. Process validated and qualified before PVT.
• advanced capability closed against the roadmap.
• first pass yield at SMT.
• defects per million opportunities at SMT on NPI builds. Site SMT and equipment engineering.
• DFM and SMT Engineering manager.
• Roadmapping and Advanced Manufacturing.
• the programme MTL.
• equipment, paste and material suppliers. Six to twelve years in SMT process engineering with advanced packaging exposure fine pitch, BGA, VIPPO, HDI. Strong on DOE and process characterisation. Degree in materials, manufacturing or electrical engineering. Baseline SMT capability against the DFM rule set. Open the mixed VIPPO and advanced spacing development with a plan and a date. Physical Demands Incumbent will perform the duties of this position in a normal office environment. Duties may require periodic sustained visual concentration on a computer monitor or on numbers and other detailed data. May require occasional travel. Typical.
• Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience. Educational requirements may vary by geography. Notes This.
• is not intended to be an exhaustive list of all.
• of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica, Inc. (NYSE: CLS; TSX: CLS) is a technology leader dedicated to driving customer success and market advancements. With deep expertise in design, engineering, manufacturing, supply chain, and platform solutions, Celestica enables critical data center infrastructure for AI, cloud, and hybrid cloud and advances technologies in high-growth markets. With a talented team and a strategic global network, Celestica helps its customers achieve competitive advantages. Today, Celestica delivers innovative supply chain solutions globally to customers in strategic two operating and reporting segments: Advanced Technology Solutions (ATS) and Connectivity and Cloud Solutions (CC): ATS: This segment serves customers in complex, regulated and high-reliability markets such as Industrial & Smart Energy, Aerospace & Defense, Semiconductor Capital Equipment, and HealthTech. It is engineering led, with deep expertise in design, manufacturing and lifecycle solutions. CCS: This segment focuses on high-performance technology solutions and services for the data center, serving hyperscalers, digital native customers and enterprises. Celestica's Platform Solutions offering provides innovative and customizable computing, storage and networking solutions enabling AI-driven growth. Built on a legacy of trust and performance, Celestica has earned its reputation by delivering results in complex and fast-changing markets. Celestica exceeds customer expectations by identifying trends and staying ahead of the curve. Backed by comprehensive capabilities and a global network across North America, Europe and Asia, Celestica helps customers gain competitive advantage with the quality, flexibility and resiliency they need to respond quickly to shifts in demand. Guided by a bold vision to accelerate market advancements, Celestica delivers innovative solutions and technologies that turn complexity into opportunity. Anchored in teamwork and commitment, Celestica strives to be the most trusted partner to its customers and colleagues worldwide. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Chemical Engineering, Risk Management, Problem Solving, Procurement, Recruitment

ประเภทงาน:

งานประจำ

• Accountable for the Processing Technology agenda of Cooking aids portfolio (such as Bouillon, Seasoning, Meal maker in cube/liquid/powder/granule technology) including capability building, technology deployment, risk management, and delivery of the processing capability roadmap in alignment with business strategy.
• Represent R&D Processing in regional and global technical forums, influencing standards, governance, technology strategy, and best-practice deployment across the organization.
• Lead the development, optimization, and industrialization of manufacturing processes across Unilever Sourcing Units and Third-Party Manufacturers for innovation, renovation, sustainability, and cost optimization projects, ensuring successful scale-up from laboratory to commercial production.
• Provide technical leadership in process capability and operational excellence, utilizing advanced predictive modelling, statistical process control (SPC), Design of Experiments (DoE), digital tools, and data analytics to improve process robustness, product quality, productivity, and cost efficiency.
• Develop long-term processing technology roadmaps and identify emerging technologies, automation opportunities, and manufacturing innovations that enable future growth, process superiority, sustainability, and competitive advantage.
• Technically lead cross-functional and international project teams across R&D, Supply Chain, Procurement, Quality, Engineering, Safety, and Marketing to deliver complex projects and accelerate innovation deployment.
• Serve as the senior R&D technical authority and key business partner for assigned manufacturing sites and third-party suppliers, providing expertise in process design, process optimization, quality improvement, and root-cause problem solving.
• Lead complex manufacturing investigations and continuous improvement initiatives relating to Quality, Cost, Delivery, Safety, Efficiency, Waste Reduction, and Sustainability.
• Partner with country and regional R&D teams to define processing requirements, manage technical risks, and ensure successful adaptation of technologies across multiple markets and manufacturing networks.
• Lead strategic initiatives in process capability, manufacturing excellence, digitalization, and factory transformation, delivering measurable business impact through innovation and efficiency improvement.
• Ensure compliance with Unilever R&D Functional Excellence Standards, Consumer Safety Framework, Quality Systems, Best Proven Practices, and applicable regulatory requirements throughout product and process development activities. Act as the subject matter expert for GMP and HACCP implementation, ensuring manufacturing processes consistently meet.
• WHAT YOU NEED TO SUCCEED.
• Bachelor's/Master's Degree in Process Engineering, Chemical Engineering, Food Science or equivalent experience in capability field.
• At least 10 years experience in FMCG R&D and process development.
• Experience within Food category with proven track record is desirable.
• High English proficiency. Good oral and written communication skills, and solid presentation skills are required.
• Good Planning and organization of assigned tasks and trials.
• Has a good knowledge of data/digital and exploit tools effectively to manage Data, Information & Knowledge effectively. Can transform data into insight/ actions and make decisions based on information at hand.
• Demonstrates natural curiosity for food innovation and technology. Brings technology insights into project team and takes actions on them.
• Ability to work in virtual and multi-cultural environment. Excellent team working skills and is able to work under pressure/complexity.
• Advanced Process Engineering & Scale-up for Innovation execution.
• Design of Experiments (DoE).
• Process Capability & SPC.
• Process Validation & Technology Transfer.
• Digital Manufacturing & Data Analytics.
• GMP & HACCP Leadership.
• Root Cause Analysis (RCA).
• Risk Assessment & FMEA.
• Food Safety and Quality Systems.
• Factory Start-up & Commissioning.
• You are energized by delivering fantastic results. You are an example to others - both your results and your resilience. You are constantly on the lookout for better ways to do things, engaging and collaborating with others along the way.
• As an individual you are the one responsible for your own wellbeing and delivering high standards of work. You must also focus on the Consumer and what they need. You are humble and have your head up, looking around to interpret evidence and data smartly, spot issues and opportunities to make things better.
• Technical Leadership without Authority.
• Stakeholder Management.
• Influencing Senior Leaders.
• Strategic Thinking.
• Project & Portfolio Leadership.
• Change Management.
• Business Acumen & Cost Optimization.
• Technical communication.
• Get to know our people, our culture, and your future at Unilever. Start here - ยูนิลีเวอร์ประเทศไทย | Unilever.
• Unilever is an organisation committed to equity, inclusion and diversity to drive our business results and create a better future, every day, for our diverse employees, global consumers, partners, and communities. We believe a diverse workforce allows us to match our growth ambitions and drive inclusion across the business. At Unilever we are interested in every individual bringing their 'Whole Self' to work and this includes you! Thus if you require any support or access requirements, we encourage you to advise us at the time of your application so that we can support you through your recruitment journey.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Chemical Engineering, Safety Management, Leadership Skill, English

ประเภทงาน:

งานประจำ

• Formulate and drive the regional PSM strategy in alignment with global HSE objectives.
• Oversee deployment and continuous improvement of all PSM elements, including PHA, LOPA, SIS, MI, MOC, SCE and PSSR.
• Establish regional PSM KPIs, monitor performance trends, and report to senior leadership.
• undefined.
• Design, develop and deliver comprehensive PSM training programs to various audience levels, including site leadership, site HSE&PSM and technical staff.
• Establish, qualify and manage a regional internal PSM auditor and development program, ensuring a sustainable pool of qualified internal PSM auditors across APAC.
• 3 Capital Project PSM Technical Support & Coaching.
• Provide PSM technical support and coaching to capital projects throughout all project phases (detailed design, construction, commissioning, and startup) in APAC region.
• Mentor and coach project teams and local site personnel on PSM principles, risk assessment techniques, and regulatory compliance strategies.
• Act as the regional subject matter advisor for site teams requiring specialized process safety guidance on complex technical matters.
• undefined.
• Lead country HSE staff for investigations of process safety incidents, near-misses, and loss-of-containment events.
• Ensure robust root cause analysis, develop sustainable corrective and preventive action plans.
• Track closure of action items and share lessons learned across region.
• undefined.
• Develop and execute regional PSM audit schedule covering all APAC sites, ensuring adequate scope, frequency, and resource allocation.
• Prepare and submit comprehensive audit reports with clearly articulating findings, risk rankings.
• Establish a robust finding tracking and closure verification system to ensure all corrective actions are effectively implemented and sustained.
• Act as the regional interface with corporate auditors and external regulators.
• 6 Global PSM Support & Collaboration.
• Actively support and contribute to the development, rollout, and continuous improvement of global PSM standards, tools, and best practices.
• Collaborate with global PSM peers to ensure consistency and alignment in program execution across all operations.
• Serve as a key regional contributor to the global PSM knowledge base, sharing regional insights, lessons learned, and innovative practices with the global network.
• Bachelor's degree in chemical engineering, Process Engineering, or related technical discipline.
• Minimum 8 years of experience in chemical manufacturing, distribution, or bulk liquid terminal operations.
• Strong knowledge of Process Safety Management systems (e.g., OSHA PSM, CCPS guidelines).
• Certification such as Certified Safety Professional (CSP) or equivalent is an advantage.
• Experience in project engineering is preferred.
• Substantial hands-on experience in PSM audits.
• Competency.
• Fluent in spoken and written English.
• Strong risk assessment and analytical capability.
• Influencing and stakeholder management skills.
• Regulatory knowledge and compliance orientation.
• Incident investigation expertise.
• Strong communication and training capability.
• High integrity and strong safety mindset.
• Brenntag provides equal employment opportunities to qualified applicants and employees of all backgrounds and identities to create a workplace where difference is valued because it forms a resilient and more innovative organization. We do not discriminate on the basis of age, disability, gender identity, sexual orientation, ethnicity, race, religion or belief, parental and family status, or any other protected characteristic. We welcome applications from women, men and non-binary candidates of all ethnicities and socio-economic backgrounds.
• Brenntag TA Team.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Project Management, Nutrition, Teamwork, English

ประเภทงาน:

งานประจำ

• As our SEA Process Development Engineer, your.
• will include: Lead Process Development - Drive end-to-end development of dry manufacturing processes, defining process design, key process parameters, and specifications for new recipes, raw materials, processing lines, equipment, and global processing technologies. Drive Process Optimization - Support process efficiency, cost reduction, capacity improvement, and manufacturing troubleshooting to enhance operational performance and competitiveness. Execute Product & Technology Implementation - Lead p ...
• Bachelor's degree or higher in Science or Engineering with at least 5 years of experience in dry product technologies (especially extrusion) and manufacturing process development. Why Work at Mars? At Mars, we offer more than just a job - we offer a career with a purpose and great perks! Here's what you can expect: A Global Network - Work with diverse and talented Associates, all guided by the Five Principles. Purpose-Driven Work - Join a purpose driven company, where we're striving to build the world we want tomorrow, today. Learning & Development - Best-in-class learning and development support from day one, including access to our in-house Mars University. Competitive Compensation - An industry competitive salary and benefits package, including company bonus. Diversity & Inclusion at Mars Mars is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, colour, religion, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. If you need assistance or an accommodation during the application process because of a disability, it is available upon request. The company is pleased to provide such assistance, and no applicant will be penalized as a result of such a request.

ทักษะ:

Power BI, ERP, English, Thai

ประเภทงาน:

งานประจำ

• System Adoption and Training (approximately 40%).
• Own local adoption of Digital Hub, M3, WMS and other business applications for Vallen Thailand users, including onboarding key account users.
• Run onboarding and refresher training in Thai for warehouse, customer service, sourcing and account teams, using approved regional material and localising it where needed.
• Sit with users to find where a manual workaround has replaced available system capability, and retire the workaround through training, documentation or a process change.
• Triage incoming urgent requests. Genuine application faults route to the Systems Team or IT. Training and process gaps are yours to own and close.
• Give Heads of Department structured feedback on coverage gaps, particularly where handover is incomplete when a critical person is on leave.
• Local Process Remediation and Digitisation (approximately 30%).
• Investigate Thailand workflows that are manual, error-prone or creating commercial, operational or compliance exposure, and remediate the process rather than the individual case.
• Priority targets on joining: the master quotation list, consumption and days-of-inventory reporting, and rebate and gain-share calculation. All are currently manual in Excel with insufficient checks, which is a commercial risk.
• Move recurring manual reporting onto Digital Hub and standard reporting tools, with named owners and validation steps built in.
• Support local site implementations and hardware-linked processes, including Modula installations. Verify physical conditions on site before a process is signed off. Site travel is part of the role.[HA1].
• Escalate anything that requires regional process redesign or system configuration to the regional BPO and Systems Team, with the ground truth already documented.
• Operational Hygiene, Local (approximately 10%).
• Champion RBA audit / reporting, including liaising with internal and external stakeholders.
• Maintain the Thailand layer of the BPO knowledge base: SOPs, user guides and training material, current version, correctly filed and findable.
• Localise approved regional SOPs and templates into Thai, and keep them in alignment when the regional version changes.
• Archive obsolete local content and run periodic reviews.
• Business Support, Partial (approximately 20%).
• Provide defined, recurring business support to the Thailand commercial and operations teams: reporting packs, data preparation and key account administration.
• Key Qualifications.
• Bachelor's degree in Business, Supply Chain, Operations, Engineering, Information Systems or a related discipline.
• Experience in system adoption, user training, business analysis, operational excellence or process improvement, ideally in distribution, logistics or manufacturing.
• Demonstrated ability to train adult learners on business systems and to write clear user guides and SOPs.
• Working knowledge of ERP and WMS environments, with strong Excel and reporting skills. Power BI or similar is an advantage.
• Fully fluent in Thai and professional working English, written and spoken. You will translate between the two constantly.
• Able to tell a training gap from a technical fault, and to route each to the right place.
• Comfortable holding a boundary. This role carries a partial business support load and will be asked for more. You need to be able to decline and escalate rather than quietly absorb.
• Willing to travel to Thailand sites and customer locations. Site travel is a requirement of the role, not an occasional exception.
• Comfortable reporting into a regional function while working alongside the local country team, and able to hold both relationships.

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Production Engineering, Project Management, Problem Solving, Data Analysis, Procurement

ประเภทงาน:

งานประจำ

• Process Design and Development.
• Design, develop, and improve manufacturing processes by analyzing workflows, space requirements, equipment layouts, and resource utilization to achieve operational efficiency and business objectives.
• Process Optimization and Continuous Improvement.
• Identify, lead, and implement process improvement initiatives to reduce costs, eliminate waste, improve productivity, enhance quality, and maximize operational performance using Lean, Six Sigma, Kaizen, TPM, and other continuous improvement methodologies.
• Drive a culture of continuous improvement and operational excellence across manufacturing operations.
• Performance Monitoring and Data Analysis.
• Collect, monitor, and analyze process performance data and manufacturing metrics to identify trends, detect deviations, recommend corrective actions, and drive sustainable process improvements.
• Monitor and improve factory KPIs, including Safety, Quality, Delivery, Cost, Productivity, Yield, Waste, and Overall Equipment Effectiveness (OEE).
• Problem Solving and Troubleshooting.
• Analyze and resolve technical, operational, and process-related issues in manufacturing operations through structured problem-solving methodologies, root cause analysis (RCA), and implementation of corrective and preventive actions (CAPA).
• Project Management and Implementation.
• Lead or support process improvement, cost-saving, capacity expansion, automation, digitalization, new product introduction, and manufacturing transformation projects from concept through implementation, ensuring timely and successful delivery.
• 4M Change Management.
• Manage and monitor changes relating to Ma n, Machine, Method, and Material (4M), ensuring appropriate risk assessments, change controls, validations, and stakeholder approvals are completed prior to implementation.
• Safety, Quality, and Compliance.
• Conduct risk assessments, Job Safety Analyses (JSA), and process hazard evaluations for new and modified processes. Ensure compliance with safety, quality, environmental, regulatory, and company requirements, while developing and implementing best practices, standards, and control measures to enhance product quality, food/product safety, and operational excellence.
• Cross-Functional Collaboration.
• Collaborate closely with Production, Engineering, Quality, Technical, Maintenance, Supply Chain, and other stakeholders to optimize manufacturing processes and support operational objectives.
• Documentation and Standardization.
• Develop, maintain, and continuously improve process documentation, including Standard Operating Procedures (SOPs), Work Instructions, Process Flow Diagrams, Control Plans, and other operational standards.
• Ensure process documentation remains accurate, current, and compliant with company and regulatory requirements.
• Audit and Compliance Support.
• Support internal and external audits and ensure timely closure of findings related to process, quality, safety, environmental, and regulatory compliance.
• Training and Capability Building.
• Provide technical coaching, training, and guidance to production and support teams on process improvements, problem-solving techniques, standard work practices, and operational excellence principles.
• The experience we're looking for.
• Education: Bachelor's degree engineering / Scientific or a related field.
• Minimum 3-5 years of relevant experience in Process Engineering, Production Engineering, Manufacturing Excellence, Continuous Improvement, or Process Improvement roles within the Pharmaceutical, Food & Beverage, Consumer Healthcare, Medical Device, or FMCG industries.
• Knowledge of automation and control systems is preferred.
• Experience with process simulations and standard operating procedures.
• Experience in develop/educate working team.
• The skills for success.
• Strong communication and interpersonal skills.
• Ability to work effectively with both technical and non-technical stakeholders.
• Strong analytical and problem-solving skills.
• Results-oriented with the ability to drive continuous improvement initiatives.
• Open-minded, adaptable, and receptive to change.
• Strong teamwork and cross-functional collaboration skills.
• Ability to manage multiple priorities and perform under pressure.
• Good command of spoken and written English.
• Self-motivated and proactive with a strong sense of ownership.
• Willingness to travel domestically and internationally as required.

ทักษะ:

Chemical Engineering

ประเภทงาน:

งานประจำ

• ปริญญาโท วิศวกรรมศาสตร์ หรือวิทยาศาสตร์ (วิศวกรรมเคมีหรือเคมีเทคนิค) หรือเทียบเท่า.
• เกรดเฉลี่ยไใ่ต่ำกว่า 3.00.
• มีประสบการณ์การทำงานในโรงกลั่นน้ำมัน หรือปิโตรเคมี 0-3 ปี (วิศวกร).
• มีความรู้เกี่ยวกับการวิเคราะห์โครงการ หลักการออกแบบเชิงวิศวกรรม การวิเคราะห์และการประเมินเศรษฐศาสตร์การผลิต.
• มีความรู้ด้าน Chemical Engineering & Process Technology.