Filter Jobs

Experience:

8 years required

Skills:

Compliance, Automation, English

Job type:

Full-time

• Define, plan, and coordinate inspections for goods purchased overseas in collaboration with Dextra QA/QC teams in China, India, and other regions. Approved third-party inspection agencies when applicable.
• Ensure inspections meet project quality, cost, and delivery requirements.
• Perform and/or follow up on inspections for critical parts and projects at suppliers locations when required.
• Monitor and support inspection activities conducted by regional QA/QC teams.
• Review, consolidate, and formally report inspection results.
• Identify, document, and track non-conformities, ensuring timely corrective and preventive actions (CAPA) with suppliers.
• Support supplier qualification, evaluation, and continuous improvement initiatives, including supplier audits upon Supply Chain request.
• Quality Control Leadership Across Production Sites Lead and harmonize QC practices across all Dextra production sites (Thailand, China, Hong Kong, India).
• Develop, standardize, and deploy Inspection & Test Plans (ITPs) and QC procedures to ensure consistency and compliance.
• Shift QC focus from end-of-line inspection to process-oriented quality control, embedding quality at every production stage.
• Plan, monitor and implement the QC equipment and tools calibration plan.
• Collaborate with engineering, production, and operations teams to integrate QC automation and advanced inspection technologies where feasible.
• Drive continuous improvement initiatives to enhance quality, efficiency, and scalability.
• Monitoring, Audits & Compliance Monitor QC performance across sites using KPIs such as Process capability Index (Cpk), PPM, Defect rates, Customer complaints, Wastes, Non quality costs.
• Identify gaps, risks, and improvement opportunities, and drive corrective actions.
• Maintain and continuously update QC procedures and work instructions related to supplier and production quality.
• Customer Quality Support Act as a key quality interface for customers on quality-related matters.
• Visit customers sites when direct engagement is required to support issue resolution.
• Work closely with operations and engineering teams to define and implement corrective solutions.
• Training, Capability Building & Innovation Design and deliver training programs to upskill SQE and QC teams on Advanced quality tools, Statistical process control, Root cause analysis, International best practices.
• Promote a strong quality culture focused on prevention, ownership, and continuous improvement.
• Lead the adoption of data-driven and automated quality systems to improve accuracy, efficiency, and traceability.
• Nuclear safety Ensure that nuclear safety is taken into account in decision making and actions, and that it always takes precedence over any other consideration.
• Use a balanced, rigorous, and prudent approach to decision making with respect to quality, cost, and schedule such that nuclear safety is never compromised.
• Ensure that involved personnel understand not only their own responsibilities and the consequences of mistakes, but also those of their immediate colleagues and how these responsibilities complement each other.
• Ensure that key operational and technical positions are filled by competent and knowledgeable persons, and that they are empowered to speak openly.
• Adopt and encourage a questioning attitude, particularly when choices, or lack thereof, are presented.
• Challenge unsafe decisions, acts, behaviors, and conditions.
• Take prompt conservative and preventive actions when an incident that could affect nuclear safety is reported, even if not yet fully understood or documented.
• Communicate transparently to the Board of Directors any issue which might compromise nuclear safety, including any human, technical or organizational issue.
• Qualification Requirements: Bachelor s degree in engineering i.e., Civil or Mechanical or IndustrialScience or related field.
• Minimum 8-12 years of experience in Quality Control, Supplier Quality Engineering, or Manufacturing Quality, preferably in an international industrial or manufacturing environment.
• Strong background in supplier quality management and overseas inspections, especially in Asia (China, India).
• Hands-on experience in factory QC operations, inspections, testing, and process control.
• Exposure to multi-site or group-level quality standardization.
• Experience working closely with Supply Chain, Engineering, Operations, and Production.
• Solid knowledge of manufacturing processes, inspection/testing methods, laboratory quality systems, and equipment control.
• Practical experience with ITPs, non-conformities, CAPA, quality KPIs (Cpk, PPM), and ISO standards.
• Strong command of Lean, Six Sigma, PDCA, and root cause analysis.
• Proven leader able to influence multicultural, international teams.
• Analytical, customer-focused, and solution-oriented.
• Clear communicator, fluent in English (additional languages are a plus).
• Willing to travel internationally as required.

Experience:

5 years required

Skills:

Assembly, Compliance, Production planning, English

Job type:

Full-time

• Supervise machine assembly activities, ensuring compliance with technical reference documents (WI, process drawings, BOM, Route, etc.).
• Lead commissioning on returned & new machines processes across functional departments: after sales, design site equipment, planning, supplier quality engineers and quality controls.
• Ensure product traceability and quality standards are consistently applied across sites.
• Monitor and compare process yields across sites, implementing best practices to minimize scrap and defects.
• Strategic & Continuous ImprovementSupport company-wide continuous improvement initiatives, ensuring alignment across departments.
• Propose and implement improvement plans to achieve KPIs.
• Contribute to the definition of standardized work procedures and enforce process discipline across all locations.
• People LeadershipManage teams, ensuring consistent leadership practices.
• Approve recruitment, training, and development plans for assembly teams.
• Conduct performance reviews and ensure cascading feedback to operators.
• Foster collaboration and knowledge-sharing across departments to build a unified team culture.
• Planning & Decision-MakingParticipate in strategic production planning and resource allocation.
• Set daily and weekly priorities, balancing workloads.
• Make higher-level decisions on resource deployment, problem resolution, and operational adjustments.
• Provide consolidated performance reports to direct superior, highlighting risks, opportunities, and recommendations.
• Health, Safety & Environment (HSE)Enforce HSE rules and promote a strong safety culture across all assigned sites.
• Lead cross-site safety awareness campaigns and ensure compliance with company standards.
• Oversee safety audits, inspections, and incident investigations, ensuring lessons learned are shared across sites.
• Report and be accountable for consolidated HSE KPIs.
• Qualification Requirements:Bachelor s degree in mechanical engineering, Industrial Engineering, Electrical Engineering or related field.
• 5+ years of experience in machine assembly, site equipment supervision, or heavy machinery operations, with at least 3 years in a leadership role.
• Strong knowledge of mechanical & electrical systems, assembly processes, and safety standards.
• Proven ability to manage teams operation and make strategic decisions.
• Good command of both written and spoken English.
• MS Offices proficiency.
• Familiar with any ERP software, especially MPS.
• Excellent leadership, communication, and organizational skills.

Experience:

1 year required

Skills:

Ability to travel upcountry, Thai

Job type:

Full-time

• จัดทำงานด้านเอกสารของฝ่ายประกันคุณภาพ ทั้งในส่วนภายใน และลูกค้า.
• จัดทำข้อมูลเพื่อรองรับการตรวจติดตามจากทางลูกค้า ที่ได้เข้ามาทำการ Audit Process หรือ Supplier.
• นำเสนอการปรับปรุงระบบคุณภาพ ตลอดจนแนวทางการแก้ไขปัญหาที่ได้รับแจ้งมาจากทางลูกค้า หรือเข้าไปติดตามที่ Supplier.
• รวบรวมเอกสาร PPAP เพื่อนำเสนอลูกค้า ในส่วนของ mass production ร่วมประชุมเกี่ยวกับงานด้านคุณภาพ ระบบคุณภาพ ทั้งในส่วนภายใน และลูกค้า.
• จัดทำเอกสารเกี่ยวกับคุณภาพต่างๆ ที่ได้รับผลกระทบจากการเปลี่ยนแปลง เพิ่มเติม ขั้นตอนการปฏิบัติงาน วิธีการปฏิบัติงาน ให้แล้วเสร็จตามแผน.
• พิจาณาการตอบกลับปัญหางานด้านคุณภาพ ที่เกิดกับลูกค้า ให้ดำเนินการแก้ไขให้ได้ตามแผนงานที่ได้กำหนดไว้.
• เพศหญิง-ชาย อายุระหว่าง 18-40 ปี.
• สามารถขับรถยนต์ได้ มีใบอนุญาตขับขี่.
• มีประสนการณ์ด้านประกันคุณภาพ หรือ ควบคุุุมคุณภาพ 1 ปีขึ้นไป.
• วุฒิการศึกษา ม.6 ขึ้นไป.
• สามารถใช้คอมพิวเตอร์พื้นฐานได้.
• สามารถเริ่มงานทันทีหรือ 15วัน.
• สถานที่ปฏิบัติงาน.
• 55/8 ม.6 ต.คลิงมะเดื่อ อ.กระทุ่มแบน จ.สมุทรสาคร 74110.
• อัตรา.
• 1 คน.
• วิธีการสมัคร.
• สมัครผ่าน Email.
• เข้ามาสมัครที่บริษัท.

Experience:

1 year required

Skills:

Assurance, Swift, Internal Audit, English

Job type:

Full-time

• Zero business interruption due to external regulatory issue/notifications.
• Zero External Notification (from Local authorities) on Customization Operations.
• Zero Significant Quality Incident on Customization Operations.
• Quality related customer complaint/rejection/return improvement.
• Right First Time on Artwork and Initiative delivery via customization.
• Vertical startup for Customization Operation owned supply network design project deliveries.
• In-market quality issue/crisis management and resolution.
• Zero critical observation for Internal 3PL (Third Party Logistics) assessment.
• Contribution to Cost-Cash-Service delivery vs target.
• Leads the QA program in local customization site and ensures that customization operations in your area of responsibility operate with the expected level of QA capability inline with company s policy. Own building the capability building & coaching of your responsible organization and any contracted third party operations and ensure internal policy/procedure or external compliance.
• To lead, co-lead or contribute in enabling cost/cash/service delivery of your organization.
• Build capability with key partners in Plant, Sales, Customer/Distributor Logistics in driving and enabling on target shelf quality execution in the trade.
• Coordinate with Customization key stakeholders on quality related issue resolution and Product disposition to minimize business interruption. Drive swift product disposition decision on Quality related block to minimize non performing inventory.
• Partnership with Customization team to ensure Quality element readiness for Customization initiatives, Supplier Selection, Qualification and On-going assessment.
• Responsible for Quality Incident, Quality related Customer and Consumer Complaint root cause investigation and CaPA development and closure effectiveness.
• Knowledgeable in external regulation. Oversight and liaison with product regulatory team for regulatory compliance in Customization. Responsible to coordinate with key stakeholders to ensure compliance to Halal, ISO, and other Quality-related customization licenses and/or certifications.
• Primary QA SPOC to review, approve and provide solutions as needed for all Customization related change management for Customization projects, initiatives, and on-going production.
• Build Quality Culture and QA capability for strong Customization foundations, ie qualifying and conducting health assessment, internal audit to ensure existing and new customization have clear action plans to meet the P&G quality systems and business needs.
• Responsible for reviewing Quality results, improvement, help needed and drive effective and influential engagement in the Production Supply and SMO LT Quality Council.
• Job Qualifications.
• Role Requirements.
• Bachelor's degree in Science, Engineering fields or supply chain-related with an excellent academic background.
• 1-3 years working experience preferably in QA /QC.
• Must have proven success from school or work experience of leadership and analytical thinking skills.
• Curious individuals can make sophisticated decisions using all the available data but are comfortable enough to use their gut feeling and instinct when these are missing.
• Strong in communication and proficient in English & Thai.
• About us.
• We produce globally recognized brands, and we grow the best business leaders in the industry. With a portfolio of trusted brands as diverse as ours, it is paramount our leaders are able to lead with courage the vast array of brands, categories, and functions. We serve consumers around the world with one of the strongest portfolios of trusted, quality, leadership brands, including Always , Ariel , Gillette , Head & Shoulders , Herbal Essences , Oral-B , Pampers , Pantene , Tampax and more. Our community includes operations in approximately 70 countries worldwide.
• Visit http://www.pg.com to know more.
• We are an equal opportunity employer and value diversity at our company. We do not discriminate against individuals on the basis of race, color, gender, age, national origin, religion, sexual orientation, gender identity or expression, marital status, citizenship, disability, HIV/AIDS status, or any other legally protected factor.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
• Job Schedule.
• Full time
• Job Number.
• R000146803
• Job Segmentation.
• Entry Level

Experience:

3 years required

Skills:

Production planning, Excel, ERP, English

Job type:

Full-time

• Possess basic knowledge of supply chain activities, including the transformation of natural resources, raw materials, and components into a finished product that is delivered to the end customer.
• A material planner has responsibility for the planning and smooth running of the production process. Pian, schedule, release, and control material delivery based on MRP time-phased requirements.
• Incorporate methods and techniques involved in lean and Just-in-Time (JIT) managemen ...
• Schedule, co-ordinate, and expedite of material between supplier and warehousing to meet the production schedule.
• Communicate with the Production Planning, Production, Quality Control, Engineering, and Sales departments on a regular basis to resolve potential schedule interruptions.
• Effectively sets priorities with an appropriate sense of what is most important. Manages time effectively to meet schedules and deadlines.
• Monitor day to day work progress and prepare the weekly and monthly program and report.
• Uses systems to keep track of information; keeps detailed records as necessary.
• Bachelor's Degree or higher in engineering or any related fields.
• Experience at least 3 -5 years in the planning.
• To speak and understand business English applied to company working situations.
• To use Outlook, Word, PowerPoint, Excel, intranet, internet, ERP (as applicable) at the level needed for the work application (kinds of documents and speed of the work).
• Project work experience.
• Great communication skills.
• Planning and analytical skills.
• Have good problem-solving skills and decisions making.

Experience:

4 years required

Job type:

Full-time

• Design and implement test strategies, test plans, and test cases.
• Perform manual and automated testing for web and backend applications.
• Develop and maintain test automation frameworks (UI & API testing).
• Execute functional, regression, integration, and performance testing.
• Identify, document, and track defects using tools like JIRA.
• Collaborate with developers and stakeholders to ensure quality throughout the SDLC.
• Contribute to CI/CD pipelines by integrating automated tests.
• Perform API testing using tools like Postman or similar.
• Ensure application performance, scalability, and reliability standards are met.
• Mentor junior QA engineers and promote best testing practices.
• ABOUT YOU
• 4-6+ years of experience in Quality Assurance or Software Testing.
• Strong experience in test automation tools (e.g., Selenium, Cypress, Playwright).
• Experience with API testing and tools such as Postman or REST clients.
• Familiarity with CI/CD tools (e.g., Jenkins, GitLab CI).
• Knowledge of programming/scripting languages (Java, JavaScript, Python).
• Experience with Agile/Scrum environments.
• Understanding of performance testing tools (e.g., JMeter, k6) is a plus.
• Experience with SQL for data validation.
• Strong analytical and problem-solving skills.
• Good communication skills with the ability to collaborate across teams.
• Professional proficiency in English is a plus.
• WHY AMARIS?
• Global Diversity: Be part of an international team of 110+ nationalities, celebrating diverse perspectives and collaboration.
• Trust and Growth: With 70% of our leaders starting at entry-level, we're committed to nurturing talent and empowering you to reach new heights.
• Continuous Learning: Unlock your full potential with our internal Academy and over 250 training modules designed for your professional growth.
• Vibrant Culture: Enjoy a workplace where energy, fun, and camaraderie come together through afterworks, networking events, and more.
• Meaningful Impact: Join us in making a difference through our CSR initiatives, including the WeCare Together program, and be part of something bigger
• Equal Opportunity
• Amaris Consulting is proud to be an equal opportunity workplace. We are committed to promoting diversity within the workforce and creating an inclusive working environment. For this purpose, we welcome applications from all qualified candidates regardless of gender, sexual orientation, race, ethnicity, beliefs, age, marital status, disability, or other characteristics.
• Who are we?
• Amaris Consulting is an independent technology consulting firm providing guidance and solutions to businesses. With more than 1000 clients across the globe, we have been rolling out solutions in major projects for over a decade - this is made possible by an international team of 7,600 people spread across 5 continents and more than 60 countries. Our solutions focus on four different Business Lines: Information System & Digital, Telecom, Life Sciences and Engineering. We're focused on building and nurturing a top talent community where all our team members can achieve their full potential. Amaris is your steppingstone to cross rivers of change, meet challenges and achieve all your projects with success.
• Brief Call: Our process typically begins with a brief virtual/phone conversation to get to know you! The objective? Learn about you, understand your motivations, and make sure we have the right job for you!
• Interviews (the average number of interviews is 3 - the number may vary depending on the level of seniority required for the position). During the interviews, you will meet people from our team: your line manager of course, but also other people related to your future role. We will talk in depth about you, your experience, and skills, but also about the position and what will be expected of you. Of course, you will also get to know Amaris: our culture, our roots, our teams, and your career opportunities!
• Case study: Depending on the position, we may ask you to take a test. This could be a role play, a technical assessment, a problem-solving scenario, etc.
• As you know, every person is different and so is every role in a company. That is why we have to adapt accordingly, and the process may differ slightly at times. However, please know that we always put ourselves in the candidate's shoes to ensure they have the best possible experience.
• We look forward to meeting you!

Experience:

3 years required

Skills:

Express, Excel, Multitasking, English

Job type:

Full-time

• Monitor and manage operation in Return and Rework team of process and data controlling to accuracy.
• Able to summarize and prepare reports to present to supervisors.
• Works with internal and external functions to properly handle pushed-out parcels.
• Follow up and clear pending parcel status within the system to maintain the predetermined period.
• Able to solve specific problems.
• Requirements: Bachelor's Degree or Logistics management, Supply chain management or any related field.
• At least 3 years of working experience in logistics, supply chain or express industry.
• Be able to communicate in English.
• Good communication and presentation skills.
• High analytical ability - critical and logical thinking and optimization.
• Strong working knowledge of Spreadsheets (Excel/Google Sheets).
• Good team player.
• Multitasking and prioritizing skills.
• Proven working experience in project management.

Experience:

1 year required

Skills:

Assurance, English

Job type:

Full-time

• Develop, refine, and maintain Operational Guidelines for assigned policy areas, translating policy intent into clear, actionable instructions and ensuring alignment with policy changes, platform updates, and operational best practices.
• Produce, validate, and maintain high-quality Testing Sets for calibration, QA evaluation, arbitration, and operational assessments, ensuring balanced coverage of scenarios, content types, and edge cases.
• Analyze complex, ambiguous, and high-risk cases to provide structured clarifications ...
• Support arbitration, QA, training, and calibration workflows by identifying misapplication patterns and operational gaps, driving measurable improvements in reviewer accuracy and consistency.
• Collaborate cross-functionally with Policy, Governance, Product, Engineering, Algo, and Training teams to ensure OGs and Testing Sets are scalable, actionable, and effectively translated into SOPs and training materials.
• Track quality and operational metrics to identify improvement opportunities and drive continuous enhancements in enforcement accuracy, workflow efficiency, and cross-team effectiveness.
• Contribute to ad-hoc quality and governance initiatives that enhance enforcement quality, operational effectiveness, and team performance.
• Minimum QualificationsBachelor's degree or equivalent experience; 1+ years of experience in quality assurance, training, editorial review, or a related field;.
• Expertise in content moderation policy, operational guideline development, and enforcement workflows.
• Strong command of English with exceptional attention to detail, clarity, and linguistic consistency.
• Demonstrated ability to interpret and enforce complex guidelines or policies in writing-focused workflows.
• Analytical thinker with experience evaluating qualitative content and using data to inform process improvements. Ability to design and deliver interactive, engaging training materials and sessions.
• High level of self-motivation, solution-oriented thinking, and ability to multi-task, prioritize, and meet strict deadlines in a fast-paced, collaborative environment.
• Excellent written communication skills with emphasis on precision, clarity, and operational feasibility.
• Preferred QualificationsPrior experience in content moderation, AI, or technical writing teams is a plus.
• Familiarity with machine-executable logic, labeling frameworks, or test-set workflows.
• Experience collaborating with Policy, Product, Governance, Engineering, or Training teams.
• Knowledge of scenario coverage, positive/negative balance, and dataset validation.
• Job Information
• About TikTok
• TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and we also have offices in New York City, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.
• Why Join Us
• Inspiring creativity is at the core of TikTok's mission. Our innovative product is built to help people authentically express themselves, discover and connect - and our global, diverse teams make that possible. Together, we create value for our communities, inspire creativity and bring joy - a mission we work towards every day.
• We strive to do great things with great people. We lead with curiosity, humility, and a desire to make impact in a rapidly growing tech company. Every challenge is an opportunity to learn and innovate as one team. We're resilient and embrace challenges as they come. By constantly iterating and fostering an "Always Day 1" mindset, we achieve meaningful breakthroughs for ourselves, our company, and our users. When we create and grow together, the possibilities are limitless. Join us.
• Diversity & Inclusion
• TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Experience:

5 years required

Skills:

Compliance, Automation, Software Testing, English

Job type:

Full-time

• Maintaining automated code and scripts to ensure reliability and alignment with evolving requirements.
• Monitoring automated test results and ensuring all tests consistently pass before release, investigating and fixing failures promptly.
• Driving improvements in test coverage, stability, and execution speed to reduce defects and increase delivery confidence.
• Ensuring traceability between requirements, test cases, and automated scripts for completeness and compliance.
• You will lead defining testing scenarios and estimating effort to fulfill customer requirements. We work closely as a team to set timeframes for assigned user stories and establish clear outcomes that align with business objectives. You will review scenarios and test cases with junior team members to ensure high-quality test code and adherence to engineering guideline.
• We continuously work to identify and implement any improvements to improve team/operational efficiency. And You will be responsible to drive them to achieve efficiencies and results.
• Master/Bachelor s Degree in Computer Science, Computer Engineering or related or a related field.
• Experience 5+ years in testing fundamentals, automation, and QA tools.
• Proven knowledge and experience in software testing fundamentals, testing concept, method, automation test implementation and test tools.
• Proven understanding of Robot framework, Cucumber and Python programming.
• Experience of performance testing and automation frameworks.
• Experienced in the Cloud technology.
• Understanding of security implications and secure coding.
• Practical experience with agile development methodologies and tools (Scrum, JIRA etc.).
• Proficient in English for both spoken and written.
• Skill for writing clean, readable code and reusable components.
• Self-motivated, pressure-tolerant, and result oriented personality with innovation.
• Good communication and interpersonal skills.
• Senior Associate
• Join us and be part of a team that values innovation, quality, and continuous improvement. If you're ready to take your career to the next level and make a significant impact, we'd love to hear from you.
• LSEG is a leading global financial markets infrastructure and data provider. Our purpose is driving financial stability, empowering economies and enabling customers to create sustainable growth.
• Our purpose is the foundation on which our culture is built. Our values of Integrity, Partnership, Excellence and Change underpin our purpose and set the standard for everything we do, every day. They go to the heart of who we are and guide our decision making and everyday actions.
• Working with us means that you will be part of a dynamic organisation of 25,000 people across 65 countries. However, we will value your individuality and enable you to bring your true self to work so you can help enrich our diverse workforce.
• We are proud to be an equal opportunities employer. This means that we do not discriminate on the basis of anyone s race, religion, colour, national origin, gender, sexual orientation, gender identity, gender expression, age, marital status, veteran status, pregnancy or disability, or any other basis protected under applicable law. Conforming with applicable law, we can reasonably accommodate applicants' and employees' religious practices and beliefs, as well as mental health or physical disability needs.
• You will be part of a collaborative and creative culture where we encourage new ideas. We are committed to sustainability across our global business and we are proud to partner with our customers to help them meet their sustainability objectives. Our charity, the LSEG Foundation provides charitable grants to community groups that help people access economic opportunities and build a secure future with financial independence. Colleagues can get involved through fundraising and volunteering.
• LSEG offers a range of tailored benefits and support, including healthcare, retirement planning, paid volunteering days and wellbeing initiatives.
• Please take a moment to read this privacy notice carefully, as it describes what personal information London Stock Exchange Group (LSEG) (we) may hold about you, what it s used for, and how it s obtained, your rights and how to contact us as a data subject.
• If you are submitting as a Recruitment Agency Partner, it is essential and your responsibility to ensure that candidates applying to LSEG are aware of this privacy notice.

Experience:

1 year required

Skills:

Problem Solving, CAD, Data Analysis, English

Job type:

Full-time

• Implement dynamic, velocity-based slotting logic that leverages seasonal trends and order affinity to position high-demand SKUs for minimal travel and maximum accessibility.
• Engineer high-density storage models and long-range capacity forecasting to maximize cubic utilization while aligning the physical footprint with projected inventory growth.
• Architect end-to-end warehouse designs and storage type assignments that integrate s ...
• Develop shrinkage heatmapping and predictive loss models to visually identify high-risk zones and inventory categories prone to physical or systemic discrepancies.
• Design a comprehensive cycle count and stocktake framework that prioritizes high-value, high-velocity SKUs to ensure real-time inventory integrity with minimal operational disruption.
• Build statistical root cause models to analyze variances, distinguishing between administrative errors and physical theft to drive targeted shrinkage reduction initiatives.
• Redesign operational control points and systemic validation steps, engineering loss attribution modeling to assign financial accountability across the entire product lifecycle.
• Requirements: 1-5 years of experience in warehouse layout planning, facility management, or supply chain operations, with a proven track record in optimizing spatial layouts; candidates with relevant internship experience in large-scale warehouses or distribution centers are considered.
• Strong analytical skills, with the ability to interpret data on product turnover, storage requirements, and operational flow to inform layout and slotting decisions.
• Strong problem solving skills, with the ability to deconstruct complex, ambiguous challenges into actionable solutions by leveraging data-driven logic and strategic thinking.
• Familiarity with warehouse operations (inbound, outbound, inventory management) and material handling equipment, understanding how their workflows interact with spatial design.
• Knowledge of storage systems (e.g., pallet racking types, shelving configurations) and their suitability for different product characteristics (size, weight, turnover).
• Proficiency in using layout planning tools (e.g., CAD software, warehouse simulation tools) and data analysis tools (e.g., Excel, SQL) to design layouts and track space utilization metrics.
• Experience in developing layout documentation, zone management rules, and training materials for warehouse staff.
• Adaptability to adjust layouts in response to dynamic factors such as business growth, new product lines, or technological upgrades.
• Good communication and collaboration skills to work with cross-functional teams (inbound, outbound, inventory, equipment maintenance) and gather input on layout needs.
• Familiarity with safety regulations and industry standards related to warehouse layout (e.g., fire codes, aisle width requirements) is preferred.
• Proficient in verbal and written English communication, with the ability to document layout plans and collaborate with international teams if needed.

Experience:

8 years required

Skills:

Compliance, SQL, Project Management

Job type:

Full-time

• Lead strategic initiatives across Supply Operations focused on process improvement, automation, compliance, and scalability.
• Identify inefficiencies, risks, and control gaps through data, operational insight, and stakeholder engagement.
• Partner with teams within and outside Supply to design and implement scalable solutions.
• Drive end-to-end execution, from problem definition and requirements gathering to testing, rollout, and impact measurement.
• Improve workflows, governance, SOPs, and controls to increase consistency and compliance.
• Define and monitor KPIs to measure operational and project performance.
• Support resolution of complex operational or system-related issues through structured root cause analysis.
• Coach team members and foster a culture of ownership, collaboration, and continuous improvement.
• Functional CompetenciesStrong operations and process improvement capability, with experience improving workflows at scale.
• Proven ability to lead complex cross-functional initiatives and deliver measurable business outcomes.
• Strong stakeholder management and collaboration skills across teams within Supply and across other functions.
• Strong business judgment and structured problem-solving skills.
• Excellent verbal and written communication skills.
• Technical CompetenciesStrong analytical skills with the ability to use data to identify issues and support decisions.
• Working proficiency in SQL and experience with BI/reporting tools.
• Ability to ramp up quickly on operational systems, CRM/workflow tools, and automation opportunities.
• Ability to translate business needs into clear requirements and support implementation.
• Leadership CompetenciesStrong ownership, accountability, and execution mindset.
• Ability to prioritize and operate effectively in a fast-paced environment.
• Collaborative, proactive, and solution-oriented.
• Ability to coach team members and align stakeholders.
• Experience in travel, OTA, e-commerce, marketplace, or other tech-enabled environments.
• Experience working with supply, partner operations, connectivity, or commercial operations teams, including partnering with Product and Engineering teams.
• Familiarity with CRM, workflow automation, or low-code/no-code tools.
• Exposure to APIs, system integrations, or operational tooling ecosystems.
• Bachelor s degree in Business, Engineering, Information Systems, Analytics, Operations, or a related field.
• 8+ years of relevant experience in operations, transformation, project management, process improvement, or automation.
• Proven track record of leading cross-functional projects with measurable business impact.
• Proven people leadership experience.
• Please review our Hiring Process Guidelines before your interview click here to learn how interviewing at Agoda works.
• Discover more about working at Agoda.
• Agoda Careers https://careersatagoda.com.
• Facebook https://www.facebook.com/agodacareers/.
• LinkedIn https://www.linkedin.com/company/agoda.
• YouTube https://www.youtube.com/agodalife.
• Equal Opportunity Employer.
• At Agoda, we pride ourselves on being a company represented by people of all different backgrounds and orientations. We prioritize attracting diverse talent and cultivating an inclusive environment that encourages collaboration and innovation. Employment at Agoda is based solely on a person s merit and qualifications. We are committed to providing equal employment opportunity regardless of sex, age, race, color, national origin, religion, marital status, pregnancy, sexual orientation, gender identity, disability, citizenship, veteran or military status, and other legally protected characteristics. We will keep your application on file so that we can consider you for future vacancies and you can always ask to have your details removed from the file. For more details please read our privacy policy.
• Disclaimer.
• We do not accept any terms or conditions, nor do we recognize any agency s representation of a candidate, from unsolicited third-party or agency submissions. If we receive unsolicited or speculative CVs, we reserve the right to contact and hire the candidate directly without any obligation to pay a recruitment fee.

Experience:

1 year required

Job type:

Full-time

• ค้นหาและทดลองเทคโนโลยีใหม่ๆ รวมถึงวัสดุอุปกรณ์ (เช่น กระดาษแบบพิเศษ,วัสดุทำโครงตู้) เพื่อสร้างความแตกต่างให้แบรนด์
• เสาะหา Supplier รายใหม่ๆ และควบคุมดูแลการปรับปรุง/ตกแต่งพื้นที่ร้านในแต่ละสาขา
• พัฒนาระบบ Software หลังบ้าน (Dashboard) ร่วมกับทีม Dev เพื่อให้ดู Report ได้แบบ Real-time และแม่นยำขึ้น
• กำหนดมาตรฐานและตรวจสอบการปฏิบัติงานของพนักงานหน้าร้านและทีมอีเว้นท์ (ความสะอาด, Service Mind, SOP) เพื่อรักษาคุณภาพการบริการสูงสุด
• กำกับดูแลความพร้อมใช้งานของตู้ Photobooth จุดติดตั้ง อุปกรณ์การทำงาน และบริหารจัดการแผนการบำรุงรักษา
• สนับสนุนงานบริหารอื่นๆ ตามที่ได้รับมอบหมาย เพื่อขับเคลื่อนเป้าหมายขององค์กร
• สนใจเทคโนโลยี กล้าทดลองซอฟต์แวร์หรืออุปกรณ์ใหม่ๆ
• มีความรับผิดชอบสูง ละเอียดรอบคอบมาก
• ชอบทำงานแบบ Multitasking
• สามารถจัดการปัญหาได้อย่างมีระบบ ระเบียบ
• สามารถแก้ไขปัญหาเฉพาะหน้าได้
• มีไหวพริบ สามารถแก้ไขปัญหาเฉพาะหน้าได้ดีเยี่ยมภายใต้ความกดดัน
• มีประสบการณ์ด้าน Operations, Retail หรือ Event อย่างน้อย 1-2 ปี
• ทำงานแบบ Work from Home (WFH) ได้ 1 วัน/สัปดาห์
• สิทธ์ประกันสังคม
• วันลาพักร้อน 10 วัน
• วันหยุดนักขัตฤกษ์.

Experience:

5 years required

Skills:

Compliance, Risk Management, Procurement

Job type:

Full-time

• Establish, implement, and maintain the Project Quality Plan (PQP) in accordance with contractual requirements, Grid Technologies standards, and applicable international standards (e.g. ISO 9001, ISO 10005 / ISO 10006).
• Ensure full integration of customer, regulatory, and internal quality requirements through compliance matrices and controlled processes, ensuring traceability throughout the HV substation project lifecycle.
• Define, monitor, and manage quality objectives, KPIs, and target values, aligned wit ...
• Ensure consistent application of the Quality Management System (QMS) across project execution, including effective alignment between HQ processes and site activities.
• Support project management in quality-related risk management, milestone planning, and achievement of Quality Gates, including readiness checks and gate reviews.
• Coordinate with internal interfaces (engineering, procurement, site, commissioning) and external parties to ensure transparent and compliant quality governance across all disciplines.
• Quality Assurance and Control 40% Ensure execution of project activities in compliance with approved processes, quality plans, specifications, and inspection & test plans (ITPs) for HV substation systems and equipment.
• Plan, coordinate, and participate in supplier and subcontractor quality activities, including selection, qualification, audits, assessments, and performance monitoring.
• Review and approve supplier documentation, manufacturing records, inspection reports, and test results for HV equipment (e.g. GIS/AIS, transformers, protection & control panels).
• Participate in and witness Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT), ensuring conformity with contractual and technical requirements.
• Manage non conformities (NCRs) through structured root cause analysis and implementation of effective corrective and preventive actions (CAPA).
• Exercise professional authority to withhold releases, milestones, or deliveries when quality requirements are not met, ensuring timely escalation to project management and functional quality lines.
• Continuous Improvement and Reporting 20% Establish and maintain a systematic approach for continuous quality improvement across all phases of HV substation project execution.
• Analyze quality data, KPIs, incidents, and audit results to identify trends, risks, and improvement opportunities.
• Lead and support lessons learned activities, project reviews, audits, and assessments, ensuring effective feedback into current and future projects.
• Promote Good Practice Sharing and preventive quality thinking within the project and wider organization.
• Provide focused and regular quality reporting to project management, regional/divisional quality, and other stakeholders, including escalation of critical quality issues.
• Support development of project team capability by identifying qualification gaps, promoting use of quality tools and methodologies, and fostering a proactive quality culture.
• What You Bring Bachelor's degree in Engineering, Quality Management, or a related technical field.
• 5+ years of professional experience in quality management within: HV/EHV substation projects Energy, power transmission, construction, or industrial EPC environments.
• Proven experience implementing and managing quality management systems (e.g., ISO 9001) in complex project environments.
• Experience working with international customers and standards is an advantage.
• Certified Quality Engineer (CQE) or equivalent quality certification.
• Six Sigma Green or Black Belt.
• Project or risk-related certifications (e.g. PMP , PRINCE2 , or equivalent) are an advantage.
• HV / substation technical training or manufacturer certifications are a strong plus.
• Full working rights in Thailand.
• Our Grid Technology division enables a reliable, sustainable, and digital grid. The power grid is the backbone of the energy transition. Siemens Energy offers a leading portfolio and solutions in HVDC transmission, grid stabilization and storage, high voltage switchgears and transformers, and digital grid technology
• Who is Siemens Energy?
• At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 92,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we re also using our technology to help protect people and the environment.
• Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.
• Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo
• Our Commitment to Diversity
• Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.
• Rewards/Benefits Be a trusted advisor to both your Internal and External Stakeholders.
• Develop your technical and soft-skills working with cross-functional teams.
• Numerous further training opportunities (technical, soft skills etc.) are available to you on the Siemens Energy Learning platform.
• Jobs & Careers: https://jobs.siemens-energy.com/jobs.

Experience:

5 years required

Skills:

Compliance, Negotiation, Contracts

Job type:

Full-time

• Communicate with users to consolidate requirements into Master Procurement Plan (MPP, APP, AMPP).
• Review and analyze users requirements in order to provide the best fit sourcing strategy and propose qualified vendors to match with users requirements.
• Perform as a single point of contact for both contractors and users to facilitate the procurement process and ensure its compliance.
• Support users in reviewing PO, invoices, or related documents; and announcing the reference price to ensure compliance with NACC s law.
• Ensure evaluation criteria is reasonable with fairness in dealing the contractors.
• Support and advise users in preparing the procurement proposal to Procurement Committee and contract documents when the proposal is approved.
• Facilitate tender/negotiation process, including to negotiate contracts with contractors to ensure the contracts gives adequate protection to Company legal position and conforms to Company legal requirement.
• Provide support during formulation of the contracting negotiation and clarification of contract terms, give recommendations on contractual exceptions/deviations from contractors, and draft the final contracts.
• Coordinate with Procurement and Contracts Services Team in case of contracts complex deviation.
• Manage contracts and provide initial alleviation or dissolution on procurement contracts dispute before arbitration or court litigation process.
• Ensure contracts is closed out and user complete contractor s performance evaluation under the contracts.
• Keep update on procurement and contracts matters, commercial terms and conditions, and market information in order to protect and optimize Company s interest.
• Job End Results.
• Master Procurement Plan (MPP, APP, AMPP).
• Proposal on best fit sourcing strategy and qualified vendors.
• Single point of contact for both contractors and users to ensure the compliance with company s procurement procedure.
• Support on reference price matters.
• Reasonable and fair evaluation criteria.
• Support and advise on procurement proposal and contract documents.
• Tender/negotiation process facilitation.
• Contracts formulation, clarification of contract terms, recommendations on contractual exceptions/deviations, and final contracts.
• Contracts management, initial alleviation or dissolution on procurement contracts dispute before arbitration or court litigation process.
• Close out report and contractor s performance evaluation.
• Updated procurement and contracts matters, commercial terms and conditions, and market information.
• Professional Knowledge & Experiences.
• Bachelor's degree in Engineering, Commercial, law or related technical fields.
• At least 5 years experience in procurement and contracts or related functions.
• Good knowledge in oil and gas industry, commercial, insurance and legal.
• Good command of written and spoken English with TOEIC score higher than 750.
• Additional Desirable Qualifications.
• Communication and negotiation skill.
• Work Location.
• Bangkok - Resident.

Experience:

1 year required

Skills:

Research, Market Analysis, Contracts

Job type:

Full-time

• Source and procure consumable materials for factories within the group, including oil, PP woven bags, and packaging consumables, etc.
• Conduct supplier research, evaluate vendors, and manage supplier qualification and performance assessment.
• Perform market analysis, price comparison, and cost benchmarking to support sourcing strategies.
• Negotiate pricing, terms, contracts, and service agreements to achieve cost savings and ensure reliable supply.
• Maintain strong relationships with local and international suppliers.
• Coordinate closely with production, planning, warehouse, and quality teams to align materials demand.
• Monitor purchase orders, delivery schedules, and material availability to prevent shortages or delays.
• Identify supply risks and implement mitigation plans.
• Prepare procurement reports, monthly sourcing performance, and cost-saving progress for management review.
• Support continuous improvement initiatives in procurement efficiency, supplier consolidation, and cost optimization.
• Qualifications: Bachelor's degree in Arts, Economics, Business Administration, Supply Chain, or related fields.
• At least 1-3 years of experience in Procurement/ Purchasing, Sourcing, or supply chain or related fields.
• Expertise in category management for specific product categories, such as electronics, construction materials, chemical raw materials, etc.
• Experience in negotiating contracts with suppliers.
• Strong knowledge of data warehousing and data analytics (e.g., Excel, SQL, BI Report).
• Strong Digital Literacy, problem-solving, and Analytical skills.
• Flexible to travel and work overseas as per assignment.
• Contact: Samita (Mine) Email: [email protected]

Experience:

3 years required

Skills:

SQL, Scrum, Good Communication Skills, English

Job type:

Full-time

• Design, develop, and maintain detailed test plans and test cases.
• Perform functional, regression, integration, and performance testing.
• Actively use and build test scripts to improve efficiency.
• Take ownership of test coverage for assigned projects/modules.
• Mentor junior testers, review test results, and ensure QA best practices.
• Work closely with developers and business teams to understand requirements and ensure test coverage.
• Ensure accuracy, completeness, and efficiency of software through thorough testing.
• Bachelor s Degree in Computer Engineering, Computer Science, Software Engineering or related field.
• 2-5 years of QA/software testing experience.
• Proficiency in manual testing and test design techniques.
• Strong knowledge of API testing, database testing, and integration testing.
• Strong knowledge of SQL and ability to use queries for testing and data validation.
• Experience working in Agile/Scrum environment.
• Good communication and mentoring skills to guide junior testers.
• Strong analytical and problem-solving skills.
• Attention to detail and ability to document test results clearly.
• Good communication and teamwork skills.
• Fluent in Thai with good command in English.

Experience:

5 years required

Skills:

Automation, Scrum, Software Testing, English

Job type:

Full-time

• Design, develop, and execute both manual and automated test cases for web, mobile, and API applications.
• Perform functional, integration, regression, and API testing to ensure product quality and system reliability.
• Maintain and enhance automation test frameworks and scripts.
• Collaborate with developers, business analysts, and international stakeholders to clarify requirements and identify test scenarios.
• Analyze test results, identify defects, and work closely with development teams to resolve issues.
• Participate in Agile/Scrum ceremonies including sprint planning, daily stand-ups, and retrospectives.
• Ensure testing activities are completed within project timelines and quality standards.
• Create and maintain test documentation including test plans, test cases, and defect reports.
• Provide mentorship and technical guidance to junior QA/SDET team members.
• Continuously improve QA processes, testing methodologies, and automation coverage.
• Bachelor Degree or higher in Computer Engineering, Computer Science, Information Technology or any related IT major.
• At least 5 years of experience in software testing, including both manual and automation testing.
• Strong experience in automation testing tools and frameworks.
• Hands-on experience in manual testing including functional, integration, regression, and API testing.
• Experience working in Agile/Scrum development environments.
• Good understanding of software development lifecycle (SDLC) and QA methodologies.
• Strong analytical, troubleshooting, and problem-solving skills.
• Experience mentoring or coaching junior QA/SDET team members.
• Excellent communication skills with the ability to work effectively in an international team environment.
• Fluent in Thai and English, both written and spoken.

Experience:

2 years required

Skills:

SQL, Software Testing, Teamwork, English

Job type:

Full-time

• Perform manual testing to verify software meets functional and business requirements.
• Independently design, document, and execute test cases.
• Use SQL queries to validate and analyze data in databases.
• Identify, report, and track software defects.
• Work closely with developers and business teams to understand requirements and ensure test coverage.
• Ensure accuracy, completeness, and efficiency of software through thorough testing.
• Bachelor s Degree in Computer Engineering, Computer Science, Software Engineering or related field.
• 2 - 6 years of experience in manual software testing.
• Ability to write and execute test cases independently.
• Knowledge of SQL and ability to use queries for testing and data validation.
• Strong analytical and problem-solving skills.
• Attention to detail and ability to document test results clearly.
• Good communication and teamwork skills.
• Thai Native level with good command in English.

Experience:

1 year required

Skills:

SQL, Scrum, Good Communication Skills, English

Job type:

Full-time

• Design, develop, and execute test cases for web and mobile applications.
• Perform manual testing to ensure system functionality, usability, and performance meet requirements.
• Identify, document, and track bugs using bug tracking tools.
• Work closely with developers and business teams to understand requirements and ensure quality delivery.
• Perform data validation and verification using basic SQL queries.
• Support testing activities across SDLC, including SIT and UAT.
• Participate in Agile/Scrum ceremonies such as sprint planning, daily stand-ups, and retrospectives.
• Ensure timely delivery of testing tasks and maintain test documentation.
• Bachelor s Degree in Computer Engineering, Computer Science, Information Technology, Software Engineering or related field.
• 1 - 3 years of experience in manual testing.
• Experience testing both web and mobile applications.
• Familiarity with test case management and bug tracking tools.
• Basic knowledge of SQL for data verification.
• Understanding of SDLC and QA processes.
• Experience working in Agile/Scrum environments.
• Good communication skills and proactive working attitude.
• Nice to have: Interest or experience in automation testing.
• Thai Native level with good command in English for dicumentattion.

Experience:

5 years required

Skills:

Assurance, ISO 9001, English

Job type:

Full-time

• Participate in Quality and technical meetings as necessary.
• Review supplier reports from a Quality point of view.
• Follow Up NCRs (Non-Compliance Reports) issued by PTTEP and suppliers/contractors with respect to corrective actions presented by suppliers/contractors.
• Lead monthly contract meetings with service providers from a Quality perspective.
• Interface with Well Engineering and Operations Division (OWO) and its departments in Bangkok and the Logistics Base in Songkhla for all matters concerning the Quality issues on OWO s Products, and Services.
• Interface with the PTTEP Quality representatives in Songkhla, or in other locations where PTTEP Products or Services are being performed.
• Keep regular contact with goods, Products, and Service Suppliers and local Service providers.
• Remain competent to represent PTTEP in the presence of the regulator as required.
• Contribute to preparation of OWE/S QAQC budget including follow-up and control of expenditures for the assigned contract management.
• Maintain an archive for all Quality Records received by Drilling and Well Services Departments.
• Personal Qualification & Experience.
• Bachelor s degree in any engineering discipline from a recognized University.
• Working knowledge of ISO 9001 Version 2015 or API Q1 or Q2.
• Possess working knowledge in the NDT methods of Magnetic Particle Inspection, Liquid Penetrant, Ultrasonic Testing and Radiography.
• Possess working knowledge of the Products and Services provided to PTTEP.
• Preferably a minimum of 3 years working in a Quality Department of any engineering/manufacturing industries (preferably in Oil & Gas businesses, especially with practical experience in managing Quality issues on Drilling and Well Services Products & Services).
• Advantageous if with good knowledge and familiarity with the most advanced QA/QC requirements and procedures for inspection/auditing.
• Manage the Drilling and Well Services Quality database system to ensure that any record required is properly archived and retrievable.
• Perform the review of suppliers Quality documentation to ensure suitability to Scope of Work/Service.
• Support Quality technical audits and assessments.
• Attitude to stay in Operational bases, Manufacturing facilities for short periods.
• Critical aptitude and the ability to analyse processes quickly, methodically and effectively.
• Personal Qualification & Experience (Cont.).
• PC literacy with Word and Excel applications in a Windows environment.
• Basic Knowledge of Drilling and Well Services Products.
• Good knowledge and familiarity with the most advanced Quality requirements and procedures for inspection/auditing.
• Team player skills, capable of working with professionals.
• Fluency in English language, both verbal and written.
• Company/Internal.
• The job holder will interface with the Drilling and Well Services Department in Bangkok and the Well Operation Logistics Base for all matters concerning the Quality issues on Drilling and Well Services Products and Services.
• Interface with the PTTEP Quality Representatives in Songkhla and in other Locations where PTTEP Products and Services are being performed.
• External.
• The job holder has regular contact with Products and Service Suppliers (Drilling and Well Services) and local Service Contractors and Suppliers.
• Demonstrate a personal commitment to, Safety, Security, Health and Environment by following .
• Thailand Statutory Health, Safety & Environmental Regulations.
• PTTEP Corporate Health, Safety, Security & Environment Policy.
• Contractor s & Suppliers Health and Safety Management Systems.
• Additional Desirable Qualification.