Filter Jobs

Experience:

5 years required

Skills:

Safety Management, Compliance, Chemical Engineering, English

Job type:

Full-time

• Implement procedures, standards, guidelines and management system related to technical safety including technical safety documents e.g. risk management standard, process safety management standard, HAZID/ HAZOP guideline and technical safety specifications within PTTEP Engineering General Specifications (PEGS) in compliance with international standard and industry best practice plus in alignment with corporate direction and SSHE MS.
• Develop and implement technical safety work plans, activities and budget in accordan ...
• Develop and provide advice, guidance and support to studies/projects/assets on implementation of corporate SSHE MS standards/ procedures and guidelines, international design codes/standards and PEGS related to Process/Technical Safety.
• Act as Technical Authority for technical safety related to preliminary assess deviation against relevant corporate SSHE standards and specifications.
• Provide technical safety support to Projects involving participation / leading safety studies (HAZID, HAZOP, SIL, QRA etc), performing safety engineering design and studies, and/or supervising / reviewing / approving work done by engineering contractors. Ensure that recommendations from these studies are translated into actions to make risks as low as reasonably practical.
• Facilitate and participate in risk assessment workhop including but not limited to HAZOP, HAZID, SIL, etc. Ensure the recommendations are followed up and closed out properly.
• Provide technical safety support to asset operations including participation / leading safety studies, Management of Change (Modifications, Deviations, Downgraded Situations), assist in process safety performance monitoring and analysis, etc.
• Develop and periodically review Concept Safety Reports, Design, Operations and high risk activity Safety Cases, including oversight of contractors work.
• Assist in conducting compliance check and audit programs on Technical Safety related (MOC, Safety barriers, PSUA, PSSR, PTRs, PEER Review, SSHE Due Diligence, SSHE Verification Audit), identify gap, give recommendation for continuous improvement, and track until completion of SSHE findings/ recommendations/ actions.
• Use appropriate software and tools for safety analysis, calculation and design aids e.g. PHAST, Flaresim, PIPENET as well as provide support, guidance and troubleshoot to studies/ projects/ assets on engineering activities regarding technical safety engineering.
• Participate in accident/ incident investigations when nominated, analyse and provide advice and support on preventive measurement and remedial actions to near misses or high potential incidents related to Technical Safety including SCE failure to ensure all actions are taken properly.
• Monitor and analyze SSHE Statistic, share lessons learned and develop campaign/ program to enforce mitigative and preventive measure to reduce the incidents.
• Formulate and implement program/campaign which promote process safety awareness, Loss of Primary Containment (LOPC) prevention and prevent major accident in PTTEP asset operations, projects and high risk activities.
• Develop safety engineering deliverables, prepare related documents, and produce, organize a process safety database and report.
• Able to work at site locations (domestics / International), Fit to work offshore.
• Other duties assigned by supervisor or manager.
• Professional Knowledge & Experiences.
• Bachelor s Degree in Chemical Engineering or related fields.
• Minimum 5 years experience of Technical Safety Engineer or 8 years experience in related engineering disciplines.
• Minimum 3 years experience in oil and gas industry onshore or offshore.
• Good understanding of oil and gas exploration and production process.
• Extensive experience in risk assessment facilitation, scribe and documentation.
• Solid knowledge in loss prevention process, safety study and safety analysis techniques.
• Proficiency in industry codes, standards, and SSHE regulations.
• Strong leadership, analytical, and problem-solving skills.
• Excellent communication skills with the ability to work independently and collaboratively.
• Fluent in English (written and spoken).

Job type:

Full-time

• Design and implement GenAI solutions using LLMs and other techs.
• Build RAG (Retrieval-Augmented Generation) systems with vector databases.
• Develop and optimize prompts for accuracy, reliability, and cost-efficiency.
• Implement fine-tuning and model customization when needed.
• Build evaluation frameworks to test model performance, bias, and safety.
• Implement guardrails, safety checks, and content filtering.
• Stay current with rapidly evolving GenAI landscape and best practices.
• Document technical approaches and share knowledge with the team.
• Responsible for other relating tasks as assigned to align with business policy and build long term business growth.
• Explore opportunity to improve workflow and build healthy environment.
• Build a career with us as we help our customers and the community live Healthier, Longer, Better Lives.
• In accordance with recruitment policy and hiring standard of AIA (Thailand) Company Limited, after completing the selection process, you are required for criminal background check before joining the company. Your criminal record information will be retained according to the PDPA policy of the company. As per attached link
• https://www.aia.co.th/th/about-aia/privacy/candidate Build a career with us as we help our customers and the community live Healthier, Longer, Better Lives. You must provide all requested information, including Personal Data, to be considered for this career opportunity. Failure to provide such information may influence the processing and outcome of your application. You are responsible for ensuring that the information you submit is accurate and up-to-date.

Skills:

Research, Data Analysis, Risk Management

Job type:

Full-time

• Consolidate actionable medical insights from the country that can help inform company strategies.
• Translate the Global Medical Goals and Strategies into research, data analysis, scientific communication, educational,.
• and other tactics and solutions that improve patient outcomes and enhance access in their country.
• Consolidate actionable medical insights from the country that can help inform company strategies.
• Communicate both scientific and business needs credibly, appropriately and effectively across a variety of internal and external stakeholders at all levels.
• Build trust with external scientific community via peer-to-peer scientific exchange, research and educational collaborations, interactions with scientific societies and health organizations,.
• publications, or other. Provide therapeutic/functional training to assigned teams and affiliate functions.
• Develop and execute country medical educational programs and symposia.
• Lead country advisory boards and expert input forums to inform company strategy.
• Participate in and contribute significantly to professional organizations, academic or regulatory working teams Leads MSL (Medical Science Liaison) / team of MSLs assigned to asset.
• Collaborate in the successful management of asset safety or quality issues, i.e. contribute content and strategy in regulatory responses and interactions, risk management planning and.
• implementation.
• Act with ethics & integrity; provide non-promotional, balanced, reliable and scientific information, follow strictly company standards and local regulations.
• MD degree is required; recognized expertise through 2-3 yrs. clinical and/or research experience in therapy area is desired.
• Experience of local pharmaceutical industry guidelines, regulatory/reimbursement framework and clinical research guidelines.
• Strategic thinking, specifically related to asset value proposition, and clinical and value evidence.
• Developing a network of scientific leaders and successful interactions with other key stakeholders (public groups, government officials, medical professional organizations) in therapy areas Proven ability to effectively communicate information at country management level, with public groups and to scientific leaders.
• Excellent interpersonal, analytical, communication (written as well as oral) and results oriented project management skills.
• Strong prioritization skills and ability to understand how decisions fit into the broader context of corporate strategies In a matrix environment, able to effectively collaborate across functions.
• Adaptability, Adaptability, Business Decisions, Business Strategies, Clinical Marketing, Clinical Research, Corporate Strategy Development, Data Analysis, Enterprise Risk Management (ERM), Healthcare Education, Interpersonal Relationships, Job Descriptions, Medical Knowledge, Medical Marketing Strategy, Medical Research, Pharmaceutical Medical Affairs, Pharmacy Regulation, Project Management, Project Prioritization, REMOTE_SKILL-1-52891, Risk Management, Scientific Communications, Scientific Publications, Scientific Reviews, Strategic Planning {+ 2 more}
• Current Employees apply HERE.
• Current Contingent Workers apply HERE.
• Search Firm Representatives Please Read Carefully
• Merck & Co., Inc., Rahway, NJ, USA, also known as Merck Sharp & Dohme LLC, Rahway, NJ, USA, does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. Where agency agreements are in place, introductions are position specific. Please, no phone calls or emails.
• Regular
• Hybrid
• 02/3/2026A job posting is effective until 11:59:59PM on the day BEFORE the listed job posting end date. Please ensure you apply to a job posting no later than the day BEFORE the job posting end date.
• Requisition ID:R382927.

Skills:

Electronics, English

Job type:

Full-time

• Manage and supervise Engineers, Technicians and any temporary personnel assigned within the COM/PID section.
• Ensure all COM/PID segments are maintained in a technically sound condition and are available in a timely manner.
• Collaborate with various maintenance and operations departments to plan and execute scheduled maintenance tasks effectively.
• Lead and chair internal meetings within the COM/PID section.
• Facilitate cross-functional activities between the Electronics, Permanent Way & Facilities, and COM/PID sections.
• Take appropriate actions and provide leadership in the event of incidents occurring within the COM/PID section.
• Oversee the execution of both preventive and corrective maintenance programs.
• Provide technical support for commissioning, installation, and testing activities.
• Use your skills to move the world forward.
• Bachelor s degree in a technical field with relevant work experience, preferably in public transportation or infrastructure projects.
• Proven experience in administration, project coordination, and team supervision, including working in a multi-national company environment.
• Strong leadership and team management skills, with the ability to guide and motivate cross-functional teams.
• Proficient in computer applications and possesses strong analytical and problem-solving skills.
• Excellent command of spoken and written Thai; good proficiency in English communication.
• Why you ll love working for Siemens Mobility.
• We live and foster an ownership culture in which every employee takes personal responsibility for our Company's success. We invest in our team members, offering a wide variety of development opportunities. In this role you will have the opportunity to qualify for Siemens Commercial Project Manager career and to undergo the Commercial Project Management certification.
• Flexible Benefits Program for employees & dependents.
• Medical Insurance for Spouse and Children.
• Siemens Share Options.
• National & International opportunities.
• Positive, inclusive and relaxed working environment.
• Join a team dedicated to transforming the everyday for a more sustainable future.
• Siemens prides itself on its diverse workforce.
• Siemens has been recognised as ahead of its time for many reasons, and our progressive policies is one of them. We encourage applications that reflect the diversity of the communities within which we work.
• We are a proud equal opportunity employer, where we continue to push for a work environment of diversity and inclusion, we also believe that differences in personalities, thoughts and ideas are important, and that is why we know diversity and inclusion is very important in helping realise the potential of our people. As part of our Ownership culture, Siemens supports reasonable flexible working practices that empower our employees to best meet work and personal commitments.

Experience:

2 years required

Skills:

Compliance, Procurement, SAP

Job type:

Full-time

• To manage raw material and packaging material team to stable production when to change manufacturing plan in production process.
• Follow up investigation, CAPA of any issues during using material in day-to-day manufacturing.
• To ensure and maintain compliance level of supplier (reject rate, complaint rate etc).
• To ensure that packaging material test results are checked, approved, recorded and available for inspection in accordance with Good Manufacturing & Control Laboratory Practices.
• To be responsible for maintain packaging material specification.
• Be responsible for all SOP related to packaging and raw material and safety.
• Co-ordinate with planning, production, warehouse, procurement, and quality team when raw material and packaging material encounter quality problem.
• To ensure that packaging material test results are checked, approved, recorded and available for inspection in accordance with Good Manufacturing & Control Laboratory Practices.
• To ensure recompilation for raw material is aligned with sampling card.
• Be responsible to pass and release all packaging material complied in SAP system.
• Coach and mentor less experience analyst and staffs; check the quality of their work and help them resolve problems.
• To supervise team to solve analysis issue and instrument operate issue.
• To ensure that equipment, instrument are maintenance, calibrated of packaging material in QC laboratory.
• Accountable for ensuring laboratory investigations are thorough and accurate and escalation of confirmed Out of Specification (OOS) and Out of Trend (OOT) results in line with global standards and any local SOPs.
• To provide effective application of analytical investigation and change management within QC as defined in SOPs.
• To maintain Raw material sampling following HALAL requirement.
• To understand and follow all necessary Health & Safety systems and ensure that work is consistent with safe working practices.
• To communicate with packaging team and AQL when packaging specification problem.
• To provide and support raw material and packaging material rejection report to production, warehouse, planning, and supplier.
• To review packaging material report, summarize monthly packing material rejection, Right at First time (RFT).
• Co-responsible for housekeeping, cleanliness, and safety in the laboratory, also responsible for taking care of laboratory facilities to keep them in good condition and ready for use.
• Perform other related jobs that may be assigned by the supplier or superior.
• To responsibility of Halal Management TeamDevelop and monitor manufacturing procedure of halal product to assure its consistency.
• Coordinate for test every incoming material in accordance with halal certificate, specifications, and manufacturer.
• Communicate with KAHI for each deviation and non-compliance of material and product in halal documentation.
• Deliver internal halal training to all internal department member.
• The experience we're looking for.
• Minimum 2 years experience in Quality Control and/or Assurance of manufacturing site and / or technical centre preferably within a multinational Pharmaceutical Business.
• Through knowledge of GMP requirements for API manufacturer (ICH7) and PS9000 standard for pharmaceutical packaging material.
• Broad understanding of Healthcare and Pharmaceutical manufacturing operations business including raw materials and packaging material manufacturing and control.
• Knowledge of Quality responsibilities, systems, and standards.
• Knowledge and experience of Good Manufacturing Practice and Regulatory standards.
• Supplier/3rd party/Distribution centre (WH) Quality Management.
• The skills for success.
• Flexibility in thinking and pragmatic problem-solving skills.
• Proven experience in multifunctional / multinational project management.
• Excellent communication skills with the ability to work on own initiative is essential for the success of this role. Be able to debate and negotiate with external supplier personnel.
• Well-developed influencing skills. Diplomatic and tactful in difficult supplier situation.
• Highly motivated and confident in external environments. Organised and able to deliver concise written or oral summaries to line manager.
• Able to lead improvement plans with key suppliers, requires a good manufacturing knowledge and an understanding of business process.
• Able to train and coach other auditors is preferably.
• SAP experience/knowledge will be advantage.
• What we offer.
• With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way. We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy.
• Equality.
• We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you. All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law.

Experience:

3 years required

Skills:

Project Management, English

Job type:

Full-time

• Provide reservoir engineering input to field development plans, ensuring alignment with Asset Planning and cross-functional teams.
• Manage, update and maintain reserves and reservoir related datasets with high accuracy, including reserves estimation, periodic reserves reporting (monthly/quarterly/annual), and resources maturation.
• Plan and monitor reservoir management activities, including production diagnostics, performance evaluation, and subsurface/well issue identification for mature oil and ...
• Propose, coordinate, and monitor well and drilling operations and data acquisition programs (e.g., formation pressure test program, well intervention, workover, surveillance) to optimize production, extend well life, and enhance subsurface understanding.
• Plan, execute, and oversee reservoir engineering activities such as well testing, well performance evaluation, decline analysis, and development well proposals to support production enhancement.
• Apply knowledge of production optimization concepts to improve well performance, maximize recovery and support continuous improvements in field performance.
• Professional Knowledge & Experiences.
• Bachelor's or higher in Petroleum/Reservoir Engineering, or related discipline.
• 3+ years of experience in Petroleum Engineering, Reservoir Engineering, or related subsurface functions.
• Experience in work process optimization and digitalization, including improving subsurface workflows, integrating data-driven tools, and enhancing efficiency in reservoir engineering processes.
• Good in both written and spoken English.
• Good project management capability, including planning, prioritization, and cross functional coordination.
• Good computer literacy with broad understanding of engineering and analytical software/tools.

Skills:

Compliance, Instrument, SAP

Job type:

Full-time

• To ensure that quality of raw materials, packing materials and finished products are in accordance with company quality specifications and standards and ensure execution of daily laboratory workloads according to the set schedules and standards as well as development works.
• Ensure that workings are compliance with HSE&Q standard and policy.
• Conduct laboratory works to ensure testing is in accordance with lab procedures and instructions as per company standards.
• Ensure lab equipment and instrument are adequately serviced, maintained and properly calibrated.
• Verify in process/finished product inspected in warehouse to ensure all products are in good conditions before supply to customer.
• Verify testing records and maintain the records. Provide periodical lab summary.
• Conduct QC / lab work compliance with the company QMS & HSE, ISO9001/14001/45001, ISO17025 requirements.
• Conduct of lab / QC development works as per assign.
• Primary investigation of chemical details for support investigation team.
• To communicate effectively and proactively with internal customer, in order to manage effectively and identify and act upon opportunities for improvement.
• Be able to plan of work.
• Knowledge, experience & capabilities.
• Critical knowledge.
• Bachelor degree of Chemistry or related science.
• Be able to shift working.
• Capable in using GC, HPLC and UV-Spectrophotometer.
• Proficiency in LIMS and SAP.
• Critical experience.
• At least 3 months experience with analytical instrument and chemical techniques.
• Service minded.
• Work with Yes mentality.
• Additional Information Team work culture.
• Positive Attitude.
• Flexibility in working shifts.

Skills:

Compliance, Safety Management, Project Management, English

Job type:

Full-time

• Installation & Site Management: Lead planning and execution of depot workshop equipment installation, including method statements, logistics, permits, site coordination, SEQ compliance, stakeholder interfaces, and alignment of scope, resources, schedule, and budget.
• Testing & Commissioning (T&C) Leadership: Develop, implement, and manage the Depot Workshop Equipment T&C strategy; provide technical leadership, manage test plans and documentation (ITPs, FAT, SAT, IRs), lead T&C meetings, and drive contractual accept ...
• System Integration & Interfaces: Coordinate technical interfaces across power, earthing, SCADA/PLC, fire systems, communications, signaling, depot tracks, safety interlocks, and civil services; validate interlocks, fail safes, load testing, functional performance, and cybersecurity integration where applicable.
• Safety, Quality & Compliance: Enforce the Safety Management System and Permit to Work regime; conduct risk assessments, manage NCRs and corrective actions, and ensure compliance with applicable standards, codes, and legislative requirements while maintaining full auditability.
• Documentation, Training & Handover: Oversee preparation and submission of all T&C deliverables, including as built records, certifications, O&M manuals, spares, and asset data; plan and deliver training to O&M teams and manage punch list and defect liability closure.
• Reporting & Commercial Support: Monitor cost, schedule, and progress; maintain accurate reporting and project data; support subcontractor agreement development, manage commercial risk, and identify opportunities for value engineering and business improvement.
• Use your skills to move the world forward.
• Bachelor s degree in Electrical Engineering, Power Engineering, Mechanical or Mechatronics Engineering, or a related discipline.
• Hands on experience in metro or rail projects, with direct responsibility for installation and testing & commissioning (T&C) of depot workshop equipment or closely related rail systems.
• Proven track record in successfully delivering complex, multi disciplinary infrastructure projects.
• Strong knowledge of project commercial management, contract administration, and managing requirements of large scale clients.
• Proficiency in project management and planning tools, such as Primavera and MS Project, along with document control systems.
• Fluent English communication skills; proficiency in Thai is considered an advantage.
• Why you ll love working for Siemens Mobility.
• We live and foster an ownership culture in which every employee takes personal responsibility for our Company's success. We invest in our team members, offering a wide variety of development opportunities. In this role you will have the opportunity to qualify for Siemens Commercial Project Manager career and to undergo the Commercial Project Management certification.
• Flexible working arrangements.
• Flexible Benefits Program for employees & dependents.
• Medical Insurance for Spouse and Children.
• Siemens Share Options.
• National & International opportunities.
• Positive, inclusive and relaxed working environment.
• Join a team dedicated to transforming the everyday for a more sustainable future.
• Siemens prides itself on its diverse workforce.
• Siemens has been recognised as ahead of its time for many reasons, and our progressive policies is one of them. We encourage applications that reflect the diversity of the communities within which we work.
• We are a proud equal opportunity employer, where we continue to push for a work environment of diversity and inclusion, we also believe that differences in personalities, thoughts and ideas are important, and that is why we know diversity and inclusion is very important in helping realise the potential of our people. As part of our Ownership culture, Siemens supports reasonable flexible working practices that empower our employees to best meet work and personal commitments.

Experience:

2 years required

Skills:

Python, Golang, React.js, node.js, English, Thai

Job type:

Full-time

• Product Planning & Strategy: Define and manage the product roadmap, translating business goals into technical requirements and actionable development plans..
• Technical Solution Design: Utilize your Full Stack expertise (Python, Go, React) to assess technical feasibility, design system architecture, and choose the right tech stacks for new features..
• Development Oversight: Collaborate closely with the engineering team to ensure high-quality code delivery. While you won't be coding full-time, you must be able to revi ...
• Requirement Analysis: Break down complex requirements for AI/Computer Vision integration into clear user stories and technical specifications for the dev team..
• Cross-Functional Collaboration: Work with internal stakeholders and external partners to integrate third-party systems (e.g., ALPR systems, IoT devices) seamlessly into our platform..
• Quality & Support Management: Oversee the product s lifecycle from development to deployment, ensuring robust performance across Windows/Linux servers and minimizing technical debt..
• Proven experience in Product Management or a similar role (e.g., Tech Lead, System Analyst)..
• Strong background in Full Stack Development (2+ years preferably) with hands-on experience in Python, Go (Golang), and JavaScript (React)..
• Proficiency in designing RESTful APIs (FastAPI) and working with databases (PostgreSQL, MongoDB)..
• Understanding of DevOps, Linux, VMware, and Cloud infrastructure is highly desirable..
• Basic knowledge of AI/Machine Learning pipelines is a strong plus..
• Management Skills: Ability to plan, prioritize, and manage multiple projects using Agile/Scrum methodologies..
• Communication: Excellent English communication skills to articulate technical concepts to non-technical stakeholders and clients..
• Education: Bachelor s degree in Computer Science, Engineering, or related fields..
• Competitive Compensation: Attractive salary package with performance-based bonuses..
• Flexible Work Culture: Hybrid working model with remote work options to support work-life balance..
• Health & Wellness: Comprehensive health and dental insurance plans..
• Growth & Development: Access to the latest AI tools/tech and support for continuous learning..
• Leave & Holidays: Generous paid time off, including extended parental leave..
• Team Environment: A collaborative culture that values innovation, with regular employee recognition programs..

Experience:

5 years required

Skills:

Business Development, Product Development, Mechanical Engineering, English

Job type:

Full-time

• Influencing international standards and codes.
• Leading specification efforts with consultants and designers.
• Representing Dextra in technical committees and industry platforms.
• Product Specification & Standardization.
• Develop, maintain, and harmonize product specifications across Dextra s portfolio.
• Ensure specifications meet international standards, regulatory requirements, and customer needs.
• Drive standardization initiatives to reduce complexity.
• Support the qualification and approval of products with consultants, contractors, and authorities.
• Assist in developing tools and materials that help consultants and designers integrate Dextra solutions into their designs.
• Participate in monitoring and interpreting international standards (ACI, AS, IS, Eurocode, etc.).
• Support senior staff in representing Dextra in technical committees and industry forums.
• Promotion & Technical Advocacy.
• Promote Dextra s technologies to contractors, designers, and consultants by providing technical presentations, training, and specification support.
• Collaborate with Business Development and Sales teams to secure product inclusion in project specifications.
• Build and maintain strong relationships with key industry stakeholders, associations, and regulatory bodies.
• Represent Dextra in technical committees, working groups, and industry forums.
• Influence on Standards & Codes.
• Monitor global construction codes, industry standards, and regulatory frameworks relevant to Dextra s technologies.
• Contribute technical expertise to international and local standardization committees.
• Advocate for the inclusion of Dextra s innovations into relevant standards and norms.
• Act as an internal advisor on emerging regulations and their potential business impact.
• Continuous Improvement & Knowledge Building.
• Analyze trends in design codes, specifications, and market requirements.
• Document best practices and provide training to internal teams.
• Support R&D and product development with specification and standardization insights.
• Prepare reports on specification wins, standardization progress, and code-influence initiatives.
• Qualifications Requirements: Master s degree in Civil, Structural, or Mechanical Engineering.
• 5+ years of experience in product engineering, specification management, or technical marketing.
• Strong knowledge of construction industry standards (ACI, ASTM, Eurocodes, ISO, etc.).
• Proven experience engaging with consultants, contractors, or standardization bodies.
• Excellent technical communication and presentation skills.
• Experience in lobbying or contributing to international standards is a plus.
• Strong command of English communication.
• Good AI proficiency.
• Understanding of structural design principles and materials.
• Interest in international codes and regulatory frameworks.
• Strong communication and organizational skills.
• Eagerness to grow into a strategic technical role.
• Ability to work cross-functionally and in multicultural environments.

Experience:

5 years required

Skills:

Production planning, Compliance, Industrial Engineering

Job type:

Full-time

• Analyze production workflow, layout, manpower utilization to identify bottlenecks and wastes.
• Design and implement process improvement using lean manufacturing, Kaizen methodologies.
• Develop and standardize best practices to ensure consistency across operations.
• Capacity and Resource Planning Conduct time studies and line balancing to determine optimal staffing and equipment required.
• Support production planning by defining capacity models and improving line efficiency.
• Optimize plant layout for safety, ergonomics, and material flow.
• Data Analysis & Performance Measurement Monitor key performance indicators (KPIs) related to productivity, OEE (Overall Equipment Effectiveness), and cost efficiency.
• Prepare regular performance reports and recommend corrective actions.
• Use simulation tools or analytical methods to evaluate process alternatives.
• Project Management Lead cross-functional improvement projects from concept through implementation.
• Manage project timelines, budgets, and deliverables.
• Collaborate with engineering, maintenance, and production teams to ensure successful execution.
• Cost Reduction and Quality Improvement Identify cost-saving opportunities in materials, labor, and energy consumption.
• Participate in root cause analysis for quality issues and implement corrective measures.
• Support ISO, 5S, and continuous improvement programs.
• Training and Mentorship Coach and guide junior industrial engineers and production supervisors.
• Promote a culture of continuous improvement and problem-solving across teams.
• Ethical and Safety Awareness Follow company ethics, codes of conduct, and compliance policies.
• Promote safety-first behavior and environmental responsibility.
• Qualification Requirements: Bachelor s degree or Master s degree in Industrial Engineering or related field.
• 5+ years of experience in Industrial Engineering, Process improvement.
• Highly preferred: Experience in the assembly industries such as Automotive, Motorcycle, Appliances, Machinery.
• Good written and verbal communication skills.
• Proficiency in AutoCAD, simulation software, and MS Excel (or.
• Power BI for analysis), ERP/MES systems and data analysis tools.
• Excellent analytical, communication, leadership and project management skills.
• Good interpersonal and communication skills to work across multidisciplinary teams.

Skills:

SAP, Project Management, Mechanical Engineering, English

Job type:

Full-time

• Design and preparation of construction drawings for DC switchgears and cubicles (For Traction Power Supply Systems in the field of Railway Electrification) taking into account both, the customer specifications and the Siemens regulations and standards.
• Methodic construction of switchgears with the 3D-tool NX/Team Center , modeling of components.
• Maintaining of product data/documentations in SAP.
• Elaboration of conceptional solutions and finding answers to ambitious constructive requirements.
• Technical support, analysis of technical problems and answering of technical inquiries in collaboration with the manufacturing, the project engineering team and the project management.
• Planning and controlling of one s own engineering work packages in view of date, cost and quality aspects.
• Awarding of work packages to external engineering service providers and controlling of the work results.
• Product support in view of standardization and documentation.
• Use your skills to move the world forward.
• Bachelor degree or higher in Mechanical Engineering, Electrical Engineering or Mechatronics.
• Knowledge of switchgear construction and cubicle/cabinet construction.
• CAD-tools NX (Preferred), AutoCAD Mechanical, Creo (Standard and Steel Plate) or others solid 3D modeling program.
• Knowledge of relevant European and International Standards.
• Basic knowledge of electrical engineering (schematic and wiring diagrams).
• Experience in design and planning of electrical substations.
• Experience in project realization, preferably in an international project environment.
• Verbal and written fluency in English.
• Why you ll love working for Siemens Mobility.
• We live and foster an ownership culture in which every employee takes personal responsibility for our Company's success. We invest in our team members, offering a wide variety of development.
• Flexible working arrangements.
• Flexible Benefits Program for employees & dependents.
• Medical Insurance for Spouse and Children.
• Siemens Share Options.
• National & International opportunities.
• Positive, inclusive and relaxed working environment.
• Join a team dedicated to transforming the everyday for a more sustainable future.
• Siemens prides itself on its diverse workforce.
• Siemens has been recognised as ahead of its time for many reasons, and our progressive policies is one of them. We encourage applications that reflect the diversity of the communities within which we work.
• We are a proud equal opportunity employer, where we continue to push for a work environment of diversity and inclusion, we also believe that differences in personalities, thoughts and ideas are important, and that is why we know diversity and inclusion is very important in helping realise the potential of our people. As part of our Ownership culture, Siemens supports reasonable flexible working practices that empower our employees to best meet work and personal commitments.

Skills:

English

Job type:

Full-time

• 3rd- 4th year undergraduate student.
• Be able to commit a minimum of 12 weeks (full-time) during April-July 2026 period (flexibility to align with the academic semester).
• Required documents attach.
• Resume - A must.
• Transcript - A must (Unofficial / Capture can be used.).
• GPAX or weighted average mark (WAM) ** Please specify, In the application field - A must.
• Please provide your cumulative grade point average (GPA) or weighted average mark (WAM).".
• Are you ready to shape the future with confidence?.
• Will you shape the future or will the future shape you?.
• How will we work better together to build a better working world?.
• Here at EY, you ll have the chance to build a truly exceptional experience. We ll empower you with the latest technology, surround you with high-performing teams, and provide the global scale and diverse and inclusive culture you need to discover your full potential. Through our coaching and training programs, you ll develop the skills you need to stay relevant today and, in the future, - all while building a network of colleagues, mentors, and leaders who will be on the journey with you at EY and beyond.
• The opportunity: your next adventure awaits.
• We are seeking a motivated and passionate intern to join our Climate Change and Sustainability Services team. This internship offers the opportunity to be part of a dynamic group of professionals dedicated to providing high-value, independent, and trusted advice on Environmental, Social, and Governance (ESG) and Sustainability matters. The successful candidate will support our mission to expand our portfolio of Sustainability services in Thailand, focusing on climate change, decarbonization, human rights, supply chain management, and sustainability reporting.
• Collaborate with a team of sustainability professionals to enhance our service offerings in Thailand.
• Participate in projects that assist clients in identifying, measuring, and managing business and reporting risks associated with ESG/Sustainability transitions.
• Support the delivery of services related to changing government regulations and new trends in sustainability management.
• Engage in the development of ESG/sustainability strategies, focusing on environmental, climate, and social aspects.
• Contribute to the preparation of sustainability reports and assessments, including human rights due diligence and social impact assessments.
• You have an agile, growth-oriented mindset. What you know matters. But the right mindset is just as important in determining success. We re looking for people who are innovative, can work in an agile way and keep pace with a rapidly changing world.
• You are curious and purpose driven. We re looking for people who see opportunities instead of challenges, who ask better questions to seek better answers.
• You are inclusive. We re looking for people who seek out and embrace diverse perspectives, who value differences, and team inclusively to build safety and trust.
• (Year 3-4) Senior year student for a Bachelor s degree in Engineering, Science, Forestry or related field.
• Demonstrated interest in sustainability focusing on climate change and environmental savings matters.
• Keen to learn and grow within the field of Sustainability/ESG services.
• Able to work independently and think logically.
• Strong analytical and problem-solving skills.
• Excellent communication skills in both English and Thai, with the ability to articulate complex concepts clearly and effectively.
• Exposure to sustainability advice, sustainability audit/verification, or related fields.
• Familiarity with the matters of climate actions, greenhouse gas emission, decarbonization and transition plan.
• Experience or interest in developing ESG/sustainability strategies.
• Accelerate your technical capabilities and transformative leadership skills with future-focused courses and development programs.
• Broaden your horizons by working on highly integrated teams across the globe and collaborate with people of diverse backgrounds both professionally and culturally.
• Bring out the best in yourself with continuous investment in your personal well-being and career development.
• Develop your own personal purpose and help us create a positive ripple effect on our teams, our business, clients and society.
• Hands-on experience with real-world projects and challenges, providing you with invaluable insights and skills.
• Allowance package.
• Business travel insurance.
• IT equipment support.
• Are you ready to shape your future with confidence? Apply today.
• To help create an equitable and inclusive experience during the recruitment process, please inform us as soon as possible about any disability-related adjustments or accommodations you may need.

Experience:

5 years required

Skills:

Procurement

Job type:

Full-time

• Bachelor's degree in Electrical Engineering, Power Engineering, a related technical field, or equivalent practical experience.
• 5 years of experience in bidding, designing, operating, and commissioning of mechanical systems.
• Experience with mission-critical facility mechanical infrastructure systems.
• Knowledge of electrical and control systems.
• Knowledge of mechanical systems commissioning.
• Our thirst for technology is a part of everything we do. The Data Center Engineering team takes the physical design of our data centers into the future. Our lab mirrors a research and development department - cutting-edge strategies are born, tested and tested again. Along with a team of great minds, you take on complex topics like how we use power or how to run state-of-the-art, environmentally-friendly facilities. You're a visionary who optimizes for efficiencies and never stops seeking improvements - even small changes that can make a huge impact. You generate ideas, communicate recommendations to senior-level executives and drive implementation alongside facilities technicians.
• With your technical expertise, you ensure compliance with codes and standards, develop infrastructure improvements and serve as an expert in your specialty (e.g., cooling, electrical).
• As a Data Center Mechanical Engineer, you will be involved in program-level engineering projects and the modification of existing infrastructures. You will provide and prepare all types of documents including engineering reports, design documents, Total Cost of Ownership (TCO) analysis, drawing markup, budget, schedule, and more. You will ensure our facilities built execution meets project-specific goals on safety, quality, schedule, and cost. You will provide guidance and leadership to all stakeholders involved in the project on mechanical discipline related issues. Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.
• Collaborate with the core team to understand, develop, and update data center mechanical designs, starting from Basis of Design (BOD) to Issue for Construction (IFC) documents, for data center project build-outs and major infrastructure upgrades to all levels of testing and commissioning works.
• Manage mechanical engineering issues during concept design, BOD, detailed design and IFC, and support procurement in Statement of Work (SOW) preparation and bidding technical clarification.
• Be accountable for key mechanical equipment manufacturing monitoring, delivery, and installation on site. Identify and resolve issues raised by the cross-functional teams.
• Update and maintain the internal design specifications, drawings, and standards in accordance with the latest configurations.
• Develop next-generation mechanical system products to meet the company's strategies.
• Google is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. See also Google's EEO Policy and EEO is the Law. If you have a disability or special need that requires accommodation, please let us know by completing our Accommodations for Applicants form.

Skills:

Sales, Electrical Engineering, Automation

Job type:

Full-time

• Strategic Forecasting: Predict Order Intake on a monthly, quarterly, and yearly basis, contributing to our growth and success.
• Technical Expertise: Offer deep technical knowledge within your assigned portfolio, serving as a trusted advisor to customers. Guide them on the full spectrum of Siemens product capabilities and integration, ensuring they harness our solutions effectively.
• Innovation Catalyst: Spearhead the identification and recommendation of new business ...
• Efficient Support: Provide rapid and efficient technical problem-solving assistance, ensuring customer satisfaction and confidence in our support.
• You will win us over with:Educational Foundation: Proudly brandish your Bachelor's degree in Electrical Engineering, a testament to your unwavering dedication and expertise in the field. Join Siemens and let your academic prowess set the stage for a career that transcends boundaries.
• Technical Mastery: Showcase your proficiency in Siemens LV&MV Switchgear, Relaying, Controlling, Protection Systems, Substation Automation, and SCADA. Your technical prowess will be the driving force behind groundbreaking innovations and advancements.
• Industry Insight: Demonstrate a solid grasp of brownfield operations, where your expertise extends to the replacement, retrofitting, and upgrading of Power Plants and Substations. Your comprehensive industry knowledge positions you as a true leader in your field.
• In return, we offer you:Attractive compensation and benefits.
• Values-driven work culture with inclusive workplace policies and practices that prioritize diversity and inclusion.
• Endless possibilities and opportunities for progression and learning.
• Recruitment Process:CV Screening.
• A session with our recruiter to understand your motivation & your past experiences.
• 1-3 Business Interviews.
• Offer Stage.
• Medical test.
• Discover more and come #TransformTheEveryday with us! Siemens Smart Infrastructure doesn't just connect the world; it transforms it into a more compassionate, resource-conscious, and sustainable realm. From valuing our precious resources to delivering reliable, efficient sustainable energy, our solutions provide the adaptable framework for society to thrive in an ever-changing landscape. Siemens' extensive portfolio spans grid control and automation, low- and medium-voltage power distribution, advanced switching and control systems, as well as cutting-edge building automation, fire safety, security, HVAC control, and energy solutions. Join us in shaping a more connected, compassionate, and sustainable world with Siemens Smart Infrastructure - where innovation meets purpose. We value your unique identity and perspective, recognizing that our strength comes from the diverse backgrounds, experiences, and thoughts of our team members. We are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society. We also support you in your personal and professional journey by providing resources to help you thrive. Come bring your authentic self and create a better tomorrow with us. www.siemens.com/careers- if you would like to find out more about jobs & careers at Siemens. FAQ - if you need further information on the application process. Public Notice: Recruitment Fraud We wish to caution jobseekers that Siemens, as a policy, does not authorize external parties/agents to conduct employment drives or extend Offers of Employment on our behalf. We do not ask for bank details, payment of any kind nor personal financial information in return for assurance of employment. Please visit our job portal for all Siemens job openings, and apply via the portal.

Skills:

Electrical Engineering, Cost Estimation, English

Job type:

Full-time

• Hardware Engineering and Design of Direct Current Traction Power Supply (DC TPS) substations for DC electrical railway systems globally.
• Integrating, reviewing and managing of detailed electrical engineering and construction engineering work packages necessary for DC traction components manufacturing, consisted of Rectifier (Sitras REC), DC switchgear (Sitras DSG) and Voltage limiting device (Sitras SCD), as according to project specification.
• Detailed design documents for panel manufacturing, i.e., Schematic diagram of electr ...
• Preparation of Long lead / Short lead material lists and ensure that they are ordered from manufacturers according to Project master plan.
• Planning and controlling of one s own engineering work packages regarding date, cost and quality aspects.
• Technical clarifications/supports with internal / external stakeholders relevant to Project execution i.e. sub-suppliers, manufacturers, Software engineering, Project manager and Regional unit colleagues.
• Preparation of DC Traction Hardware cost estimation and bid document support upon request from sales with Rulestreams tools based.
• DC Traction substation components Factory inspection test and Factory acceptance test.
• Interface clarification and technical integration of all DC components of electrical systems within the DC traction substation.
• Use your skills to move the world forward.
• Bachelor s degree or higher in Electrical Engineering, preferably with a focus on Rail Electrification or Power System Distribution and Control.
• Strong knowledge of high and medium voltage technology, including system configuration, calculations, manufacturing, and installation processes.
• Familiarity with DC substations and DC switchgear components.
• Understanding of digital protection relays (ideally Sitras MDC, Sitras Pro) and PLC systems based on Simatic S7.
• Hands-on experience in project execution, ideally within an international project environment.
• Proficient in both Thai and English, with strong communication skills.
• Why you ll love working for Siemens Mobility.
• We live and foster an ownership culture in which every employee takes personal responsibility for our Company's success. We invest in our team members, offering a wide variety of development opportunities.
• Flexible working arrangements.
• Flexible Benefits Program for employees & dependents.
• Medical Insurance for Spouse and Children.
• Siemens Share Options.
• National & International opportunities.
• Positive, inclusive and relaxed working environment.
• Join a team dedicated to transforming the everyday for a more sustainable future.
• Siemens prides itself on its diverse workforce.
• Siemens has been recognised as ahead of its time for many reasons, and our progressive policies is one of them. We encourage applications that reflect the diversity of the communities within which we work.
• We are a proud equal opportunity employer, where we continue to push for a work environment of diversity and inclusion, we also believe that differences in personalities, thoughts and ideas are important, and that is why we know diversity and inclusion is very important in helping realise the potential of our people. As part of our Ownership culture, Siemens supports reasonable flexible working practices that empower our employees to best meet work and personal commitments.

Experience:

1 year required

Skills:

Product Development, Chemical Engineering

Job type:

Full-time

• Ensure all technical aspects of the product development, maintenance are carried out as per the agreed timings, with any issues or risks clearly highlighted to line manager in a timely manner.
• Liaise with the cross functional internal and external team to ensure technical milestones are met.
• Responsible to lead the project for projects, ensuring that these are executed to the standards required for registered products.
• Ensure all relevant product specifications and internal documentation is in place and fully approved prior to full production start-up.
• All assigned development activity must conform to legislative, health & safety and environmental requirements.
• Assure all document for material change or qualification meeting HALAL regulation requirement.
• Support to R&D laboratory and stability management in order to comply with the requirements including maintenance activities, audit preparations, etc.
• Support line manager in measuring and reporting KPIs to senior management.
• Responsible for ensuring all required formulation, feasibility work, validation, stability testing, industrial trials, claim support and dossier preparation are performed on time and to the required standards.
• Responsible for the compilation, approval and circulation of technical reports throughout the product development process.
• The experience we're looking for.
• Bachelor s degree in Chemistry, pharmacy, chemical engineering or other relevant scientific discipline.
• Minimum 1 year of relevant experience will be more preferable.
• Strong analytical skills with the ability to analyze data and solve technical problems.
• Have an understanding of the manufacturing process.
• Strong communication, people management and influencing skill.
• The skills for success.
• R&D, Product Lifecycle Management, Commercial Awareness, Business Partnership, Collaboration, Partnership building, Collaborator, Ability to challenge the status quo, Propose improvement, Accountability, Adaptability, Analytical, Formulation, Science, Chemistry.
• What we offer.
• With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way. We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy.
• Equality.
• We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you. All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law.

Skills:

Electrical Engineering, Good Communication Skills

Job type:

Full-time

• Produce design for all components of a wayside signaling system solution including but not limited to complex circuit design and power supplies,.
• Functional design for components of a signaling system including Scheme Plans and Control Tables (Logic Tables).
• Application logic data design for fail safe interlocking systems and associated maintenance tools.
• Design and engineering support for railway Operational Control Systems and HMI/GUI including SCADA systems.
• Design and engineering support for telecoms systems and networks supporting railway signaling and control systems.
• Design and engineering support for High Capacity Signaling systems such as CBTC and ETCS.
• Design and software engineering support to Train Control Management systems and enhancements such as Digital Conflict Resolution and Train Planning Systems.
• Verification and validation on design and engineering outputs.
• Support of testing and commissioning activities both in-office and on-site.
• Provide RAMS outputs across total project lifecycles.
• Carry out Set to Work simulation tests and assist in Principle Testing in an office environment.
• Assist in tender preparation and project planning, by the way of estimating, scope preparation and testing plan preparation.
• Use your skills to move the world forward.
• A strong technical knowledge of railway systems and equipment with sufficient underpinning knowledge.
• Ability to analyze technical solutions and propose innovative alternatives.
• Formal technical qualification to degree standard in Electrical Engineering or related discipline.
• Some knowledge and experience across the design domains of systems engineering, signaling, train control, train protection and communications.
• Flexibility to travel as per project requirements.
• Excellent self-discipline and adherence to quality forms and procedure.
• Good communication skills with the ability to work in a team environment.
• Why you ll love working for Siemens Mobility.
• We live and foster an ownership culture in which every employee takes personal responsibility for our Company's success. We invest in our team members, offering a wide variety of development opportunities.
• Flexible working arrangements.
• Flexible Benefits Program for employees & dependents.
• Medical Insurance for Spouse and Children.
• Siemens Share Options.
• National & International opportunities.
• Positive, inclusive and relaxed working environment.
• Join a team dedicated to transforming the everyday for a more sustainable future.
• Siemens prides itself on its diverse workforce.
• Siemens has been recognised as ahead of its time for many reasons, and our progressive policies is one of them. We encourage applications that reflect the diversity of the communities within which we work.
• We are a proud equal opportunity employer, where we continue to push for a work environment of diversity and inclusion, we also believe that differences in personalities, thoughts and ideas are important, and that is why we know diversity and inclusion is very important in helping realise the potential of our people. As part of our Ownership culture, Siemens supports reasonable flexible working practices that empower our employees to best meet work and personal commitments.

Experience:

3 years required

Skills:

Electronics, Teamwork, English

Job type:

Full-time

• We are looking for a Service Representative Service Engineer to join our Service Team. The role involves installation, commissioning, preventive maintenance, and technical support for Medium Voltage (MV) and Low Voltage (LV) Switchgear and digital energy management systems. This position is ideal for a motivated engineer who wants to develop technical expertise in electrical distribution and digital systems.
• What skills and capabilities will make you successful?Installation & Commissioning Perform installation, testing, and commissioning of MV/LV switchgear, power monitorin ...
• Conduct site acceptance tests (SAT) and functional testing according to company standards.
• Collaborate with project and technical teams to ensure smooth project handover to customers.
• Preventive & Corrective Maintenance Execute preventive maintenance and inspection of switchgear, protection relays, metering devices, and related systems.
• Diagnose and resolve technical issues (troubleshooting) during or after system operation.
• Prepare service reports and provide recommendations for system improvement.
• Customer Support & Coordination Communicate effectively with customers to ensure satisfaction and understanding of service activities.
• Coordinate with internal departments (Project, Sales, Technical Support) to deliver quality service.
• Comply with all EHS (Environment, Health & Safety) standards and site regulations.
• Technical Documentation Maintain accurate records of service activities, tools calibration, and spare parts usage.
• Support service knowledge sharing and continuous improvement within the team.
• Who will you report to? Senior Services Manager.
• What qualifications will make you successful for this role? Education: Bachelor s degree in Electrical, Electronics, or Mechatronics Engineering.
• Experience: 3-5 years in electrical service, maintenance, or commissioning.
• Technical Knowledge: Understanding of MV/LV switchgear and power distribution systems.
• Basic knowledge of control circuits, protection relays, and digital power monitoring systems.
• Skills: Problem-solving, teamwork, and customer-oriented mindset.
• Must hold a valid driving license (able to travel upcountry when required).
• Basic English communication (both written and spoken).
• Computer literacy (MS Office, report writing).
• Let us learn about you! Apply today.
• Looking to make an IMPACT with your career?.
• When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values - Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork - starts with us.
• IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world.
• We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one.
• Become an IMPACT Maker with Schneider Electric - apply today!.
• 36 billion global revenue
• 13% organic growth
• 150 000+ employees in 100+ countries
• 1 on the Global 100 World s most sustainable corporations.
• You must submit an online application to be considered for any position with us. This position will be posted until filled.
• Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and inclusion is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do.At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter here
• Schneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

Experience:

3 years required

Skills:

Quality Assurance, Assurance, Compliance

Job type:

Full-time

• Technical Consultation & Problem Solving.
• Provide technical advice on waterproofing systems and installation. Conduct site visits for technical assessment and problem resolution. Investigate and resolve technical issues and installation failures. Customer & Sales Team Support.
• Support sales teams with technical expertise during customer engagements. Provide on-site technical support during product application. Handle technical inquiries and provide expert recommendations. Technical Documentation & Quality Assurance.
• Prepare technical reports and failure analysis. Develop technical specifications, application guides, and training materials. Monitor installation processes for compliance with standards. Product Development & Innovation Support.
• Collaborate with R&D on product development initiatives. Conduct field testing of new products and application methods. Support product improvement through technical analysis and customer feedback.
• Bachelor's degree in Civil Engineering, Structural Engineering, or related engineering discipline. Minimum GPA of 2.70 for undergraduate and 3.30 for postgraduate studies. Minimum 3 years in technical support, consulting, or engineering roles in construction chemicals industry or related waterproofing systems, building materials. Native Thai, conversation English for technical documentation and international coordination (TOEIC score of 550 or above) Contact: Sarunya (Kook) Email: [email protected]