เงื่อนไขการค้นหา

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Data Analysis, Purchasing, ISO 14001, ISO 9001, English, Thai

ประเภทงาน:

งานประจำ

• Samut Prakan, Samut Prakan, Thailand.
• R0130201.
• HITACHI ENERGY (THAILAND) LIMITED.
• Quality Management.
• Full time.
• No.
• The Incoming Inspection Engineer Lead is responsible for leading all incoming material inspection activities for power transformer manufacturing. This role ensures that raw materials, components, and assemblies received from suppliers fully comply with technical specifications, international standards, and customer requirements. The position also provides technical leadership to inspection teams, supports supplier quality management, and prevents quality risks from entering production.
• You will lead, manage, provide technical guidance to Incoming Inspection Technicians, establish inspection planning, acceptance criteria, sampling strategies for incoming materials, review, approve inspection results, reports, and material release decisions, ensure incoming inspection activities meet project schedules and manufacturing needs.
• You will oversee inspection and acceptance of critical power transformer materials and components, including but not limited to: core materials (CRGO steel, amorphous metal cores), conductors (copper, aluminum, CTC, paper covered conductors), insulation materials (insulation paper, pressboard, spacers, gaskets), transformer oil (mineral or ester oil), bushings, tap changers, cooling components, structural steel and hardware and auxiliary components.
• You will ensure compliance with applicable international and customer standards (IEC, IEEE, ASTM, ISO), verify supplier documentation such as Certificates of Conformity (COC), test certificates, mill certificates, and inspection reports, maintain full traceability of incoming materials per transformer quality and regulatory requirements.
• You will lead identification, segregation, and disposition of non conforming materials, issue and manage Incoming NCRs and Supplier Corrective Action Requests (SCAR), support root cause analysis and verify effectiveness of corrective actions, coordinate with Purchasing, Engineering, Supplier Quality, and Production teams.
• You will develop, update, and improve Incoming Inspection SOPs, Control Plans, and Checklists, implement risk based inspection strategies and supplier performance monitoring, analyze incoming quality data and identify trends to reduce defects and rejections, support internal, customer, and third party audits, train and mentor Incoming Inspection Technicians on inspection techniques, standards, and safety, provide technical support during material related issues or supplier discussions.
• You will be responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines.
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.
• Bachelor's degree in engineering (Electrical, Mechanical, Materials, Industrial, or related field). Master's Degree is an advantage.
• Minimum 2 to 5 years of experience in Quality Engineering, Incoming Quality, or Supplier Quality.
• Direct experience in power transformer manufacturing or heavy electrical equipment is strongly preferred, strong knowledge of power transformer design, materials, and manufacturing processes, ability to interpret drawings, specifications, BOMs, and international standards (IEC / IEEE).
• Experience with inspection methods, sampling techniques, and metrology, hands on experience in NCR management, SCAR, CAPA, and root cause analysis (8D, 5 Why, Fishbone), sound understanding of quality management systems (ISO 9001 mandatory; ISO 14001 / ISO 45001 preferred), proficiency in data analysis, reporting, and quality systems.
• Strong leadership, coaching, and decision making ability, high integrity, attention to detail, and strong quality mindset and ability to handle priorities under project and production pressure, excellent cross functional communication and coordination skills.
• Good to excellent Thai and English proficiency (speaking, reading, and writing) for specifications, reports, and supplier communication.
• 1 month of guaranteed bonus (Fix bonus) plus Performance Bonus. (Depending on employee's performance result and Business performance).
• 10 days annual leave (Service year 0-5), 15 days annual leave (Service year 6-10), flexible working policy, Flexibility working time.
• Benefit according to local standards: Heath-care insurance benefits to employees and their dependents, annual health checkup, Provident Funds (employees can contribute up to 15%).
• Growth possibility: Learning and development platform, career movement opportunity within organization.
• Possibility to gain experience in international environment.
• Please be advised that the benefits provided may differ depending on the employee's country of hire.
• Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a.
• general inquiry form.
• on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.
• This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ทักษะ:

Electrical Engineering, AutoCAD, Problem Solving, Thai, English

ประเภทงาน:

งานประจำ

• ควบคุมงานติดตั้งระบบไฟฟ้าพลังงานแสงอาทิตย์ Solar Rooftop.
• ประสานงานกับผู้รับเหมา ผู้ตรวจสอบโครงการ และลูกค้า เพื่อให้การติดตั้งสำเร็จตามข้อกำหนด.
• วางแผนและตรวจสอบการสั่งซื้อวัสดุ รวมถึงควบคุมการใช้วัสดุในโครงการ.
• ดูแลความปลอดภัยและการปฏิบัติงานให้เป็นไปตามแผนและข้อกำหนด.
• ติดตามและรายงานความคืบหน้าของโครงการให้แก่ผู้เกี่ยวข้อง.
• ดูแลและซ่อมบำรุงเครื่องมือของบริษัทให้อยู่ในสภาพพร้อมใช้งาน.
• วิเคราะห์ปัญหาและหาแนวทางแก้ไขเพื่อเพิ่มประสิทธิภาพในการทำงาน.
• ปฏิบัติงานอื่น ๆ ตามที่ได้รับมอบหมาย.
• วุฒิการศึกษาระดับปริญญาตรี สาขาวิศวกรรมไฟฟ้าหรือสาขาที่เกี่ยวข้อง.
• มีใบ กว. ไฟฟ้า และสามารถเซ็นรับรองแบบไฟฟ้าได้ (พิจารณาเป็นพิเศษ).
• มีความรู้ด้านมาตรฐานการติดตั้งระบบไฟฟ้าและ Solar System.
• สามารถอ่านและเขียนแบบ Diagram ระบบ Solar Rooftop ได้.
• มีทักษะการใช้งานโปรแกรม AutoCAD และ SketchUP.
• สามารถขับขี่รถยนต์และมีใบขับขี่.
• สามารถเดินทางไปปฏิบัติงานต่างจังหวัดได้.
• มีทักษะการใช้งานโปรแกรม Microsoft Office.
• มีประสบการณ์ในด้านระบบ Solar จะพิจารณาเป็นพิเศษ.
• ทำไมต้องสมัครงานนี้?.
• ร่วมงานกับบริษัทที่มุ่งมั่นสร้างพลังงานสะอาด พร้อมโอกาสพัฒนาทักษะในสายงานพลังงานแสงอาทิตย์ และสวัสดิการที่น่าสนใจในสภาพแวดล้อมการทำงานที่เป็นมิตร.

ประสบการณ์:

4 ปีขึ้นไป

ทักษะ:

Electrical Engineering, English

ประเภทงาน:

งานประจำ

• Due to our expanding opportunities in the Thailand region, we are seeking a Technical Engineer for the sales of our equipment and services range.
• Electrical Solutions/products Sale experiences for minimum 4 years.
• Bachelor s Degree in engineering (Electrical Engineering).
• Any background of Electrical Distribution/Transmission Solutions is advantage.
• Able to work independently for introducing and providing Electrical Solutions for Distribution & Transmission system.
• Any background of Cast Resin Busduct, Partial Discharge Monitoring, Ultrasonic Inspection Monitoring for transmission line, Electrical Motor monitoring, able to use AutoCAD are advantages.
• Good writing, listening, and speaking English are preferences.
• Can be based in Rayong or Bangna office.
• Able to travel around the country and oversea.
• A high regard for safety and health at all times..
• Why NVMS?.
• As an employee you will enjoy a friendly, professional, and high-performance culture where you will be exposed to continual career opportunities. This is a great opportunity to contribute to an already successful organisation during an exciting time of growth and change.
• To learn more about NVMS please visit www.nvms.in.th.
• Position: Senior Technical Sales Engineer.
• Minimum 2 years of technical sales experience, in the field of industrial/power plant/Main Contractor/Project Consultant.
• Excellent about Electrical transmission/districution System.
• Knowledgeable about Electrical solutions for transmission/distribution system.
• Excellent customer relationship skills.
• Experience in oil and gas, power, general industry, Renewable plant.
• Post Date: 12/06/26.
• End Date: 12/07/26.
• Industry: Sales engineer, oil & gas, IPP, Renewable plants, EGAT, PEA, MEA, Industial plants, Contractor, Project consultant.
• Ref No.: XX..
• Career Level: Senior Sales Engineer.
• To create Sale & Marketing plan.
• Customer visit regularly for Bangkok, Chonburi, Rayong, other provinces, and Lao PDR.
• To prepare solution, quotation / proposal for clients.
• To achieve sales target and expand customer base.
• Report to Sales Team lead/Sales Manager/General Manager.
• Job Location: Bangkok > Bangna/Rayong, Rayong Office (Maptaput).
• Empl. Term: Full Time..
• Salary Details: Monthly THB.
• negotiable.
• Keywords: Senior Technical Sales Engineer.
• Ed. Level: Bechelor Degree in Electrical Engineering.
• Yr(s) of Exp: 4/and above.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, English

ประเภทงาน:

งานประจำ

• NVMS is a solutions sales and support provider that provides a high technology service to enable our clients to better manage their plant and equipment in a safe, practical and cost effective manner.
• We specialise in the area of Pressure instruments, Electrical, condition & performance monitoring, sales and supports, customised hardware and software solutions, site installation commissioning and support of monitoring systems, and practical instrument training.
• Our reputation for the highest quality, best value in the industry is born of a culture that "takes excellent care of our customers.".
• Mechanical Engineer (Vibration and Monitoring Solutions).
• Due to our expanding opportunities in the Thailand region, we are seeking a Mechanical Engineer for Vibration and Monitoring services..
• Electrical Solutions/products Sale experiences for minimum 2 years.
• Bachelor s degree in engineering (Mechanical/Electrical/Instrument Engineering or relevance).
• Any background of Vibration & Monitoring installation is advantage.
• Able to work independently for Mechanical & Electrical installation and configuration.
• Any background of Vibration, Asset monitoring, able to use AutoCAD are advantages.
• Good writing, listening, and speaking English are preferences.
• Can be based in Rayong or Bangna office.
• Able to travel around the country and oversea.
• A high regard for safety and health at all times..
• Why NVMS?.
• As an employee you will enjoy a friendly, professional, and high-performance culture where you will be exposed to continual career opportunities. This is a great opportunity to contribute to an already successful organisation during an exciting time of growth and change..
• Minimum 2 years of technical sales experience, in the field of industrial/power plant/Main Contractor/Project Consultant.
• Excellent about Electrical transmission/districution System.
• Knowledgeable about Electrical solutions for transmission/distribution system.
• Excellent customer relationship skills.
• Experience in oil and gas, power, general industry.
• Job Function:.
• Design, Engineering, Installing & Configuring Services.
• Customer visit regularly for Bangkok, Chonburi, Rayong and other provinces, and Lao PDR.
• Site survey.
• Services price estimation.
• Report to Sales Manager/General Manager.
• Job Location: Bangkok > Bangna/Rayong, Rayong Office (Map-Tapud).
• Empl. Term: Full Time.
• Salary Details: Monthly THB.
• negotiable.
• Keywords: Technical Sales Engineer.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Mechanical Engineering

ประเภทงาน:

งานประจำ

• The Inspection Engineer is responsible for performing third-party inspection, testing, and certification activities for lifting equipment and cranes, primarily within the oil and gas sector, ensuring compliance with applicable international standards, client specifications, and local regulatory requirements.
• Conduct inspection, testing, and certification of.
• Mobile cranes, offshore cranes, tower cranes.
• Lifting appliances, lifting gears, and accessories.
• Initial inspection.
• Periodic and annual inspections.
• Load testing and re-certification.
• Review engineering drawings, lifting plans, technical documents, and manufacturer data books (MDB).
• Applicable international standards (ISO, EN, ASME, API, etc.).
• Client specifications and project requirements.
• Bureau Veritas internal procedures and codes.
• Prepare accurate.
• inspection reports, certificates, and non-conformance reports (NCRs).
• in a timely manner.
• Liaise with clients, contractors, and site personnel to clarify technical issues and inspection findings.
• Identify unsafe conditions and recommend corrective actions to ensure personnel safety and asset integrity.
• Maintain professional conduct and uphold Bureau Veritas values, ethics, and impartiality at all times.
• Support audits, client meetings, and technical discussions when required.
• Education.
• Bachelor's degree in.
• Mechanical Engineering.
• or equivalent engineering discipline.
• Professional Certification.
• Mechanical Engineer License - Level 2.
• (mandatory).
• Experience.
• Minimum.
• 5 years of working experience in the Oil & Gas industry.
• At least.
• 5 years of hands-on experience in inspection.
• Lifting equipment.
• Cranes and lifting accessories.
• Prior experience working with third-party inspection agencies is an advantage.
• Technical Competencies.
• Strong knowledge of lifting equipment safety standards and regulations.
• Ability to interpret engineering drawings and technical documentation.
• Familiarity with inspection and testing techniques for cranes and lifting equipment.
• Good understanding of risk assessment and safe working practices.
• Skills & Attributes.
• Strong attention to detail and analytical skills.
• Excellent written and verbal communication skills.
• Ability to work independently and under minimal supervision.
• Willingness to travel to site locations and work in offshore/onshore environments.
• Proficient in MS Office and inspection reporting systems.
• Health, Safety & Environment (HSE).
• Committed to maintaining a high level of HSE awareness.
• Strict adherence to safety rules, procedures, and permit-to-work systems.

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ทักษะ:

AutoCAD, Thai, English

ประเภทงาน:

งานประจำ

• วางแผนและควบคุมงานก่อสร้างให้เป็นไปตามแบบและแผนงาน
• ตรวจสอบคุณภาพงานก่อสร้างและวัสดุให้เป็นไปตามมาตรฐาน
• ประสานงานกับสถาปนิก ผู้รับเหมา และหน่วยงานที่เกี่ยวข้อง
• ควบคุมงบประมาณ ระยะเวลา และความคืบหน้าของโครงการ
• ตรวจสอบและแก้ไขปัญหาที่เกิดขึ้นระหว่างการก่อสร้าง
• จัดทำรายงานความก้าวหน้าของโครงการ
• เข้าตรวจหน้างานและควบคุมงานตามที่ได้รับมอบหมาย
• ทำรีพอร์ตอัพเดทหน้างาน.
• วุฒิปริญญาตรี สาขาวิศวกรรมโยธา วิศวกรรมก่อสร้าง หรือสาขาที่เกี่ยวข้อง
• มีประสบการณ์ด้านควบคุมงานก่อสร้างหรือบริหารโครงการ (หากมีจะได้รับการพิจารณาเป็นพิเศษ)
• ใช้งาน AutoCAD และ Microsoft Office ได้ดี
• หากสามารถใช้ Revit, Civil 3D, MS Project หรือ Primavera P6 จะได้รับการพิจารณาเป็นพิเศษ
• หากมี ใบอนุญาตประกอบวิชาชีพวิศวกรรม (กว.) จะได้รับการพิจารณาเป็นพิเศษ
• มีความรับผิดชอบ สามารถทำงานภายใต้แรงกดดัน และทำงานเป็นทีมได้
• สามารถเดินทางไปตรวจหน้างานได้
• มีใบขับขี่ สามารถขับรถยนต์หรือจักรยานยนต์ได้.
• เงินเดือนเด็กจบใหม่เริ่มต้น 18,000 บาท หรือสามารถเสนอตามประสบการณ์และความสามารถได้
• โบนัส (ตามผลประกอบการ)
• ประกันสังคม
• วันหยุดและวันลาพักร้อนตามกฎหมาย
• ค่าเดินทางหรือค่าเบี้ยเลี้ยง (กรณีออกหน้างาน)
• โอกาสพัฒนาทักษะและเติบโตในสายงาน.
• วิธีการสมัคร
• ส่งเอกสารดังต่อไปนี้
• Resume
• Portfolio (ถ้ามี)
• สำเนาใบอนุญาตประกอบวิชาชีพ (ถ้ามี)
• ผลงานที่เกี่ยวข้อง (ถ้ามี).
• ส่งใบสมัครมาที่: [email protected]
• สอบถามเพิ่มเติม: 092-404-0303 (คุณพีช).

ทักษะ:

Kafka, Redis, Automation, English

ประเภทงาน:

งานประจำ

• Design and review middleware architecture aligned with enterprise standards.
• Manage and govern middleware platforms (Web Server, App Server, MQ, Kafka, Redis).
• Oversee outsourcing/vendor teams and coordinate project delivery.
• Improve CI/CD deployment pipelines and automation.
• Monitor system performance, conduct root cause analysis (RCA).
• Manage lifecycle activities (capacity, patching, upgrades, EOS/EOL).
• Ensure system stability, security, and compliance with IT standards.
• QualificationsBachelor s degree in Computer Science, IT, Engineering, or related field.
• Hands-on in middleware (IBM MQ, Kafka).
• Experience with Web/App Servers (Apache, Nginx, Tomcat, JBoss, WebSphere, IIS).
• Familiar with Redis, Linux, Docker, Kubernetes.
• Exposure to monitoring tools and CI/CD.
• Middleware architecture & performance tuning.
• Analytical problem-solving.
• Good communication & English.
• Only shortlisted candidates will be contacted.
• Talent Acquisition Department
• Bank of Ayudhya Public Company Limited
• 1222 Rama III Rd., Bangpongpang, Yannawa, Bangkok 10120
• Contact: Talent Acquisition Center: 0 2--- ---- #--183.
• FB: Krungsri Career.
• LINE: Krungsri Career.
• LINKEDIN: Krungsri.
• Applicants can read the Personal Data Protection Announcement of the Bank's Human Resources Function by typing the link from the image that stated below.
• EN (https://krungsri.com/b/privacynoticeen).
• ผู้สมัครสามารถอ่านประกาศการคุ้มครองข้อมูลส่วนบุคคลส่วนงานทรัพยากรบุคคลของธนาคารได้โดยการพิมพ์ลิงค์จากรูปภาพที่ปรากฎด้านล่าง.
• ภาษาไทย (https://krungsri.com/b/privacynoticeth).
• หมายเหตุ ธนาคารมีความจำเป็นและจะมีขั้นตอนการตรวจสอบข้อมูลส่วนบุคคลเกี่ยวกับประวัติอาชญากรรมของผู้สมัคร ก่อนที่ผู้สมัครจะได้รับการพิจารณาเข้าร่วมงานกับธนาคารกรุงศรีฯ.
• Remark: The bank needs to and will have a process for verifying personal information related to the criminal history of applicants before they are considered for employment with the bank.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

AutoCAD, Thai

ประเภทงาน:

งานประจำ

• ควบคุมติดตั้งงานระบบประกอบอาคาร.
• จัดทำแผนงาน เคลียร์ shop Drawing ตรวจสอบเอกสาร รายงานวางแผนความคืบหน้า.
• ทำเอกสารต่าง ๆ ที่เกี่ยวข้อง Method ขออนุมัติวัสดุอุปกรณ์ ร่วมประชุมติดตามงาน.
• งานอื่น ๆ ที่ได้รับมอบหมาย.
• สามารถไปปฎิบัติงานตามไซต์งานได้.

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ทักษะ:

SOLIDWORKS

ประเภทงาน:

งานประจำ

• และ จัดสร้างเครื่องจักรในระบบลำเลียงวัตถุดิบทุกรูปแบบ
• (สายพานลำเลียง - สกรูลำเลียง - ระบบโซ่ลำเลียง - กะพ้อ).
• กำลังเปิดรับสมัครเพื่อนร่วมทีมรุ่นใหม่ ไฟแรง
• เพศชาย อายุ 22 - 25 ปี
• วุฒิการศึกษา ปริญญาตรี สาขาวิศวกรรมเครื่องกล
• หรือ สาขาที่เกี่ยวข้อง
• สามารถใช้งานโปรแกรม AutoCAD
• หรือ SolidWorks ได้ดี.
• ยินดีรับนักศึกษาจบใหม่ และผู้ที่สนใจงานออกแบบเครื่องจักร.
• ออกแบบ และจัดทำแบบวิศวกรรมเครื่องจักรควบคุม
• และบริหารโครงการที่ได้รับมอบหมาย.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Quality Assurance, English

ประเภทงาน:

งานประจำ

Inspection Coordinator Reporting to: Senior Inspection Coordinator, GS Thailand Lead Role Purpose Statement: The job incumbent is responsible for the accurate and professional coordination of the whole back office administrative process flow for BIVAC in his/her area of responsibility. Performs the job within the framework of the BV Quality Assurance System, the Code of Ethics and the BV Group policies. Job Description: Arrangement for Inspection schedule by daily basis Update the Inspection report, photos, follow up IR in case of delay Check inspection report with Siebel (Internal ...

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Construction Monitoring, English

ประเภทงาน:

งานประจำ

• Manage sourcing process, including RFQ, supplier selection, and commercial comparison
• Evaluate supplier quotations and recommend cost-effective procurement solutions
• Negotiate pricing, terms, and delivery schedules with suppliers
• Coordinate with Engineering, Project, and Site teams to ensure alignment of technical and commercial requirements
• Issue and manage Purchase Orders
• Monitor procurement schedules and ensure timely delivery of materials and equipment
• Resolve procurement-related issues, including delays, quality concerns, and discrepancies
• Support cost control initiatives and value engineering opportunities.
• Bachelor s degree in Electrical Engineering, or related field
• Minimum 1-3 years of experience in procurement or purchasing (construction / ME preferred)
• Basic understanding of procurement processes and supplier coordination
• Proficient in Microsoft Office (Excel, Word)
• Good communication skills in Thai and basic English.
• Benefit.
• Transportation Expense (actual expenses)
• Health Insurance (MSIG cashless)
• Car & Gasoline (on site work)
• Provident Fund
• Annual BONUS
• OT
• Paid Vacation (6 days per year)
• Employee trip (once per year)
• New year party,
• Overseas Business Trip Allowance
• Domestic Business Trip Allowance (if it can't go home in day)
• Language allowance (N3)
• Others.
• Working Hour.
• 08:00 - 17:00.
• Holiday.
• Sat, Sun
• Public holidays
• Working on Sat (2 times per month).
• Annual BONUS (about 2 months/year)
• Provident Fund (3%)
• Overseas Business Trip Allowance (750 THB 1,000 per day)
• Domestic Business Trip Allowance (240 THB per day) if it can't go home in day.
• Language allowance (N3): 3,000THB/month..

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Automation, English

ประเภทงาน:

งานประจำ

• Maintaining the interactions with the active customers and identifying new client account as well as new business possibilities
• Selling the products and services to active customers of the company and convincing them about their usability and advantages
• Making the customers understand about the various products and services by explaining to them about the same in their local language
• Ensuring that the requirements of the international clients are met by modifying the products and services of our company to provide
• Treating and greeting the customers very well and making them go through the purchasing methods and procedures
• Attending international sales meetings, seminars and conferences arranged within the company or between the company and the customers to boost the sales profits
• Managing the inquiries and questions from the customers and clearing all their doubts on the products and services
• Convincing the customers to buy the machines or related products and services of the company
• Searching for opportunities that enhance the sales and benefit to the clients
• Administering the sales area that were allocated and planning effectively to manage time and generate profits by maintaining the sales
• Submitting the reports, records, presentations and sales documents to the Managing Director
• Maintaining the daily, weekly, quarterly, half yearly and annual sales reports and records
• Upholding the bills, financial statements and records of expenditures of the international travels occurred
• Undertaking any new relevant tasks as maybe directed by Managing Director from time to time.
• Bachelor's Degree in Mechanical, Electrical, or Industrial Engineering or equivalent is preferred
• At least 3 years of industry segment experience is preferred (Bakery / Fast-Moving Consumer Goods)
• English communication required, fair to good level of writing and speaking is acceptable
• Computer literacy, having basic skills of Microsoft Office, proficient in AutoCAD is advantage
• Own Vehicle with activated driving license & good driving skill
• Customer service orientated
• Self-managed but able to prioritize the work to fit with our company s results-oriented culture
• Good personality and outgoing with strong interpersonal and communication skills
• Analytical ability to effectively identify and resolve problems independently
• Ability to work independently and set own schedule
• Flexible to work extra hours and able to travel aboard and upcountry
• Working experience in foods industrial environment would be benefit, knowledge base in automation background is preferrable..
• Benefit.
• Basic Salary depends on educational background and work experience (Negotiable)
• Car Allowance
• Mobile Phone Allowance
• Sales Commission from new sales project (Individual Performance)
• Group Life Insurance cover for Death and Accidental including to IPD cases
• Medical Expenses claimed with company for OPD case
• Provident Fund
• Annual leave 10 days/year
• Annual Health Check-up
• Company s gathering party and outing trip (on occasion).
• Working Hour.
• 08:30 - 17:00.
• Holiday.
• Working Days: Mon-Sat (switching 2 days working on Saturday in each month).
• บริษัทต้องการคนที่เคยขายเครื่องจักรอุตสาหกรรมทำอาหารประเภทไหนก็ได้ เช่น bakery หรือ FMCG แต่ต้องเป็นรูปแบบเครื่องจักรทำอาหารเท่านั้น**
• หากไม่ได้เรียนจบสายวิศวะแต่เคยขายเครื่องจักรทำอาหารมาโดยตรง สามารถรับพิจารณาได้เช่นกัน**
• ไม่รับพิจารณาผู้สมัครที่เปลี่ยนงานบ่อยหรือเป็น job hopper (อย่างต่ำต้องทำ 3 ปีขึ้นไป)**
• ตำแหน่งนี้จะต้องพาลูกค้าไปเยี่ยมชมเครื่องจักรทำอาหารที่ นครปฐม ค่อนข้างบ่อย**
• (เงินเดือนผู้สมัครขึ้นอยู่กับประสบการณ์ของผู้สมัคร)
• Noted: รบกวนอ่านทุกครั้งก่อน apply
• หากเป็นผู้สมัครที่มีประสบการณ์ตรงมาก่อน 1-2 ปี เงินเดือนจะต้องเริ่มต้นที่ 25k - 30k
• หากผู้สมัครมีประสบการณ์ตรงในสายนี้ 3-5 ปีขึ้นไป จบตรงในสายนี้มาก่อน เงินเดือนจะขึ้นอยู่กับประสบการณ์ที่ผ่านมา 40k - 55k (แต่ถ้ามีประสบการณ์มาก่อน แต่ไม่ตรงสาย จะยังไม่รับพิจารณา).

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ประเภทงาน:

งานประจำ

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ทักษะ:

English

ประเภทงาน:

งานประจำ

• Our business
• Engineering services for renewable energy projects, primarily solar power generation systems
• Consulting services within the same field
• Hiring reason
• We are seeking new members in preparation for a large-scale project scheduled for 2025.
• Planning and coordinating projects
• Business trips with a Avg 3-4 months project every 2-5 months.
• Managing workers on site
• Overall project management, including design, material procurement, and schedule management
• Collaboration with clients and other technical teams
• Other necessary tasks.
• Must
• Must submit Transcript and English CV before application
• Male, Thai national, Age22~25
• New grad only
• Bachelor Degree in Electrical Power Engineer/Electrical Engineering fields
• Have driver license * Car provided
• Can work on Saturday *If customer request(Company provide OT Fee or can take leave on weekday)
• Conversational English level
• Advantage
• Active person
• Ability to use Auto-CAD
• Able to travel to up-country.
• Benefit.
• Living Allowance
• Travel Allowance *Basically full paid
• Gasoline allowance *Only if you commute to the job site by private vehicle
• O.T. Allowance
• Provident fund
• Medical Allowance
• Social Security Fund
• Bonus
• Salary adjustment (Once/year).
• Working Hour.
• 08:30 - 17:30.
• Holiday.
• Saturday
• Sunday
• Public holidays
• Work on Saturday (Frequency depends on the situation).

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electrical Engineering, English

ประเภทงาน:

งานประจำ

• Develop and drive CP/FT test solutions for mixed-signal IC products.
• Take ownership of test architecture, ATE software, and hardware solutions.
• Optimize yield, quality performance, and cost across the product lifecycle.
• Lead NPI bring-up and ensure seamless integration of test solutions.
• Collaborate with cross-functional teams to address technical challenges.
• Experience in analog or mixed-signal IC testing.
• Strong expertise in ATE test hardware design, particularly load boards.
• Proficiency in test development languages such as C / C++ / VB.
• Proficiency in Cadence or similar EDA tools.
• Basic understanding of semiconductor manufacturing processes and Failure Analysis (FA).
• Experience in technical leadership or mentoring engineers.
• Chinese language skills are a plus but not mandatory.
• Why to apply?.
• Join iBingo Consulting to work with a dynamic team in a cross-cultural environment. Enjoy opportunities for professional growth, technical leadership, and contributing to innovative projects in the global semiconductor industry.
• For more details: 086-610-3441.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electrical Engineering, English

ประเภทงาน:

งานประจำ

• Develop and drive CP/FT test solutions for mixed-signal IC products.
• Take ownership of test architecture, ATE software, and hardware solutions.
• Optimize yield, quality performance, and cost across the product lifecycle.
• Lead NPI bring-up and ensure seamless integration of test solutions.
• Collaborate with cross-functional teams to address technical challenges.
• Experience in analog or mixed-signal IC testing.
• Strong expertise in ATE test hardware design, particularly load boards.
• Proficiency in test development languages such as C / C++ / VB.
• Proficiency in Cadence or similar EDA tools.
• Basic understanding of semiconductor manufacturing processes and Failure Analysis (FA).
• Experience in technical leadership or mentoring engineers.
• Chinese language skills are a plus but not mandatory.
• Why to apply?.
• Join iBingo Consulting to work with a dynamic team in a cross-cultural environment. Enjoy opportunities for professional growth, technical leadership, and contributing to innovative projects in the global semiconductor industry.
• For more details: 086-610-3441.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electrical Engineering, English

ประเภทงาน:

งานประจำ

• Develop and drive CP/FT test solutions for mixed-signal IC products.
• Take ownership of test architecture, ATE software, and hardware solutions.
• Optimize yield, quality performance, and cost across the product lifecycle.
• Lead NPI bring-up and ensure seamless integration of test solutions.
• Collaborate with cross-functional teams to address technical challenges.
• Experience in analog or mixed-signal IC testing.
• Strong expertise in ATE test hardware design, particularly load boards.
• Proficiency in test development languages such as C / C++ / VB.
• Proficiency in Cadence or similar EDA tools.
• Basic understanding of semiconductor manufacturing processes and Failure Analysis (FA).
• Experience in technical leadership or mentoring engineers.
• Chinese language skills are a plus but not mandatory.
• Why to apply?.
• Join iBingo Consulting to work with a dynamic team in a cross-cultural environment. Enjoy opportunities for professional growth, technical leadership, and contributing to innovative projects in the global semiconductor industry.
• For more details: 086-610-3441.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electrical Engineering, English

ประเภทงาน:

งานประจำ

• Develop and drive CP/FT test solutions for mixed-signal IC products.
• Take ownership of test architecture, ATE software, and hardware solutions.
• Optimize yield, quality performance, and cost across the product lifecycle.
• Lead NPI bring-up and ensure seamless integration of test solutions.
• Collaborate with cross-functional teams to address technical challenges.
• Experience in analog or mixed-signal IC testing.
• Strong expertise in ATE test hardware design, particularly load boards.
• Proficiency in test development languages such as C / C++ / VB.
• Proficiency in Cadence or similar EDA tools.
• Basic understanding of semiconductor manufacturing processes and Failure Analysis (FA).
• Experience in technical leadership or mentoring engineers.
• Chinese language skills are a plus but not mandatory.
• Why to apply?.
• Join iBingo Consulting to work with a dynamic team in a cross-cultural environment. Enjoy opportunities for professional growth, technical leadership, and contributing to innovative projects in the global semiconductor industry.
• For more details: 086-610-3441.

ทักษะ:

Software Development, Product Development, Project Management, Industrial Design, Problem Solving, Recruitment, Negotiation, Accounting, Automation, Budgeting, Scrum

ประเภทงาน:

งานประจำ

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• Summary.
• The Lead Engineer, Software develops, debugs, tests, deploys and supports code to be deployed in systems/products/equipment for various applications. They write, debug, maintain, and test software in various common languages and for software at various levels in the hierarchy (from Firmware to Application). Software creation follows an agreed to development process (such as Agile, Scrum, etc.) and complies with the product life cycle development (phase/gate deliverables).
• The Lead Engineer, Software works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.
• Detailed Description.
• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Analyze, design and develop tests and test-automation suites.
• Design and develop a processing platform using various configuration management technologies.
• Test software development methodology (may be done in agile environment).
• Provide ongoing maintenance, support and enhancements in existing systems and platforms.
• Collaborate cross-functionally with customers, users, project managers and other engineers including Peer-Reviews to achieve elegant solutions.
• Provide recommendations for continuous improvement.
• Work alongside other engineers on the team to elevate technology and consistently apply best practices.
• Keep up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage a single line engineering project with a limited number of participants. Create a project/change management plan, establish and distribute project roles, and communicate what is needed from the project participants in order to make the project successful.
• Leadership - Demonstrate "Individual Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning -Solid understanding of Celestica's budgeting and accounting system and the cost accounting practices relevant to engineering work. Always act with the awareness of your work's impact on financial results. Communicate clearly and timely all aspects of your work that may have an influence on the profitability of the project and/or what is necessary for proper accounting and controlling.
• The following competencies may also be required and performed with help or under supervision: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Typical Experience.
• 3 to 8 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electrical Engineering, English

ประเภทงาน:

งานประจำ

• Develop and drive CP/FT test solutions for mixed-signal IC products.
• Take ownership of test architecture, ATE software, and hardware solutions.
• Optimize yield, quality performance, and cost across the product lifecycle.
• Lead NPI bring-up and ensure seamless integration of test solutions.
• Collaborate with cross-functional teams to address technical challenges.
• Experience in analog or mixed-signal IC testing.
• Strong expertise in ATE test hardware design, particularly load boards.
• Proficiency in test development languages such as C / C++ / VB.
• Proficiency in Cadence or similar EDA tools.
• Basic understanding of semiconductor manufacturing processes and Failure Analysis (FA).
• Experience in technical leadership or mentoring engineers.
• Chinese language skills are a plus but not mandatory.
• Why to apply?.
• Join iBingo Consulting to work with a dynamic team in a cross-cultural environment. Enjoy opportunities for professional growth, technical leadership, and contributing to innovative projects in the global semiconductor industry.
• For more details: 086-610-3441.