เงื่อนไขการค้นหา

ทักษะ:

Procurement

ประเภทงาน:

งานประจำ

• Ensure the mechanical design integrity of new Power Plant, adhering to industry standards and best practices..
• Oversee EPC Contractors throughout engineering, procurement, construction, and commissioning, ensuring quality, timelines, and budgets are met..
• Coordinate with multi-discipline teams to integrate mechanical systems effectively into the overall plant design..
• Monitor contractor performance, review designs, and provide technical guidance to resolve engineering challenges..
• Enforce SHE (Safety, Health, and Environmental) policies, promoting safe work practices and regulatory compliance..
• Conduct risk assessments and implement quality control measures for fabrication, installation, and testing..
• Support commissioning and startup of mechanical systems, ensuring operational reliability..
• Job Qualifications.
• Bachelor s degree in mechanical engineering.
• 7 years of experience in Power Plant Design is a plus.
• Professional engineering license from the Council of Engineers is a plus.
• Understand overall process of Power plants.
• Able to work under pressure and tight timeline.
• Able to travel both domestically and upcountry.
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/work upcountry and abroad.
• Goal-Oriented, Unity, Learning, Flexible.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Leadership Skill

ประเภทงาน:

งานประจำ

• Lead shift oversight for critical mechanical infrastructure, including HVAC, chillers, cooling towers, pumps, and associated systems, to ensure safe and reliable operations.
• Monitor mechanical system performance and conduct troubleshooting to minimize downtime and maintain operational resilience.
• Plan, coordinate, and supervise preventive and corrective maintenance activities in line with approved procedures and schedules.
• Support incident response and root cause analysis for mechanical equipment failures, helping restore service and prevent recurrence.
• Coordinate with vendors and contractors for servicing, repair, and maintenance activities while ensuring compliance with safety and operational standards.
• Identify opportunities for energy optimization and mechanical system improvements, while maintaining accurate maintenance records and technical reports.
• 5-7 years of relevant experience in mechanical operations, facilities maintenance, or critical environment support, ideally within data centers, industrial sites, or mission-critical facilities.
• Strong knowledge of mechanical infrastructure systems such as HVAC, chillers, cooling towers, pumps, and related building services equipment.
• Proven ability to troubleshoot mechanical issues, support incident response, and contribute to root cause analysis in operational environments.
• Experience planning and supervising preventive and corrective maintenance activities, with strong awareness of safety, compliance, and operational standards.
• Able to coordinate effectively with vendors, contractors, and internal stakeholders to ensure maintenance activities are completed safely and efficiently.
• Strong leadership skills, with the ability to guide shift activities, coordinate vendors and contractors, and support safe, reliable mechanical operations.
• Detail-oriented and technically grounded, with the ability to maintain accurate records, produce clear reports, and identify opportunities for system and energy performance improvements.
• INCO: "Cushman & Wakefield".

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Recruitment, Automation, English, Thai

ประเภทงาน:

งานประจำ

JLL empowers you to shape a brighter way. Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Location: Nava Nakorn Ind ...

ทักษะ:

Mechanical Engineering

ประเภทงาน:

งานประจำ

• Monitor mechanical system performance and conduct troubleshooting to minimize downtime.
• Plan, coordinate, and supervise preventive and corrective maintenance activities.
• Support incident response and root cause analysis for mechanical equipment failures.
• Ensure compliance with maintenance procedures, safety requirements, and operational standards.
• Coordinate with vendors and contractors for servicing and repair activities.
• Identify opportunities for energy optimization and mechanical system improvements.
• Maintain accurate maintenance records and provide technical reports and recommendations.
• INCO: "Cushman & Wakefield".

ทักษะ:

Work Well Under Pressure, Business Development, Procurement, Instrument, Leadership Skill

ประเภทงาน:

งานประจำ

At Black & Veatch, our employee-owners go beyond the project. For over a century, we have been breaking down social, economic and geographic barriers by making life's critical resources accessible to all. Working with us, you will help provide critical expertise as we, along with our valued clients, deliver solutions that positively impact communities around the world. Our professionals are our greatest asset, and we believe nothing is more important than the health, happiness and professional growth of our employee-owners. With a focus on flexible work-life balance options, an exp ...

ประเภทงาน:

งานประจำ

• ศึกษาแบบและคู่มือของอุปกรณ์ต่างๆ พร้อมทั้งจัดทำคู่มือ หรือขั้นตอนการทำงานซ่อมบำรุง ให้เป็นไปตามมาตรฐานทางวิศวกรรม.
• สนับสนุนข้อมูลเพื่อวิเคราะห์หาสาเหตุการเสียของอุปกรณ์และหาแนวทางแก้ไข พร้อมติดตามผลการแก้ไขปัญหา เพื่อไม่ให้อุปกรณ์เกิดอาการเสียซ้ำ.
• วางแผนและจัดทำแผนงานซ่อมบำรุง เพื่อให้อุปกรณ์ได้รับการดูแล ก่อนจะเกิดความเสียหาย โดยสอดคล้องกับข้อกำหนดของหน่วยงานภายนอกและข้อกฎหมาย.
• วางแผน ดำเนินการ และจัดเก็บประวัติงานซ่อมบำรุงปกติ (CM) และงานซ่อมบำรุงใหญ่ (Turnaround Maintenance) ให้อยู่ในงบประมาณ และระยะเวลาตามแผน.
• ศึกษาหาแนวทางปรับปรุงระบบ และอุปกรณ์ พร้อมทั้งออกแบบ และดำเนินการติดตั้งระบบหรืออุปกรณ์ตามการร้องขอ เพื่อให้บรรลุวัตถุประสงค์ของบริษัท.
• พัฒนาช่างซ่อมบำรุง ให้ปฏิบัติตามกฎ ระเบียบ และมีวินัยในการทำงาน พร้อมทั้งให้คำแนะนำ และฝึกอบรมทางวิศวกรรมเพื่อให้ช่างซ่อมบำรุงสามารถปฏิบัติงานได้ถูกต้อง มีประสิทธิภาพ บรรลุตามเป้าหมายและมีความปลอดภัยในการทำงาน.
• ส่งเสริมการทำงานตามหลักของอาชีวอนามัย ความปลอดภัยของตนเองและเพื่อนร่วมงาน ตลอดจนตระหนักถึงผลที่จะเกิดขึ้นจากการปฏิบัติและไม่ปฏิบัติที่มีผลต่อประสิทธิภาพของงานการจัดการด้านอาชีวอนามัย ความปลอดภัย สิ่งแวดล้อม และพลังงาน เพื่อให้เป็นไปตามเป้าหมายของบริษัท.
• เข้าร่วมกิจกรรมต่างๆ ตามนโยบายของบริษัท และริเริ่มกิจกรรมที่เป็นประโยชน์ต่างๆ เพื่อเสริมสร้างความสัมพันธ์ที่ดีภายในส่วน.
• ปริญญาตรีวิศวกรรมศาสตร์ สาขาวิศวกรรมเครื่องกล หรือ วิศวกรรมโยธา.
• มีประสบการณ์ ความรู้ ความชำนาญ ในงานด้านเครื่องกล และ โยธา ที่เกี่ยวข้องกับอุตสาหกรรมปิโตรเลียมหรือปิโตรเคมี ไม่น้อยกว่า 3-8 ปี.
• มีทักษะเกี่ยวกับงานซ่อมบำรุงรักษา งานออกแบบ ระบบ/อุปกรณ์ ในอุตสาหกรรมปิโตรเลียมหรือปิโตรเคมี มีความสามารถในการทำงานเป็นทีมด้วยใจบริการ มีความเป็นผู้นำ มุ่งมั่นอุทิศตนเพื่อองค์กร ใฝ่รู้ สามารถปรับตัวและสร้างสรรค์สิ่งใหม่ ตระหนักถึงความปลอดภัย อาชีวอนามัย สิ่งแวดล้อมและสังคม.
• หากมีใบประกอบวิชาชีพวิศวกรรม (ก.ว.) สาขาเครื่องกล จะได้รับการพิจารณาเป็นพิเศษ.
• คะแนนทดสอบภาษาอังกฤษ (TOEIC) ไม่ต่ำกว่า 650 คะแนน.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Mechanical Engineering

ประเภทงาน:

งานประจำ

• รับผิดชอบงานในช่วงดำเนินโครงการ (Project Execution).
• ตรวจสอบเอกสารด้านวิศวกรรมเครื่องกล.
• ตรวจสอบ ประสานงาน ควบคุม และติดตามการทำงานของผู้รับเหมา เพื่อให้งานด้านวิศวกรรม การจัดหา และการก่อสร้างเป็นไปตามข้อกำหนดของโครงการ แผนงาน และงบประมาณ รวมถึงบรรลุวัตถุประสงค์ของโครงการ.
• ควบคุมและกำกับดูแลงานด้านเครื่องกลในระหว่างการดำเนินโครงการ.
• ประสานงานกับทีมงานและสนับสนุนการแก้ไขประเด็นที่เกี่ยวข้อง เพื่อให้โครงการสามารถดำเนินการและแล้วเสร็จตามแผนที่กำหนด.
• ดูแลและจัดทำ Proposal ส่วนงานเครื่องกล ร่วมกับทีมโครงการ เพื่อนำเสนอลูกค้า.
• ดูแลและจัดทำ TOR เพื่อใช้ในการ Bidding ผู้รับเหมาและจัดหาวัสดุ อุปกรณ์ เพื่อใช้ในโครงการ.
• จัดทำแผนงานและงบประมาณ ส่วนงานเครื่องกล ร่วมกับทีมโครงการ เพื่อประกอบการของบประมาณและใช้ในการทำงานโครงการ.
• ควบคุม ดูแล งานติดตั้งเครื่องกลให้ได้คุณภาพ แผนงาน และงบประมาณที่กำหนดไว้.
• ควบคุมการทำงานให้มีความปลอดภัย.
• ออกแบบและแก้ไขงาน Mechanical Engineering ได้.
• ประสานงานกับทีมงานและผู้เกี่ยวข้อง เช่น ทีม Engineering, ทีมจัดหา, ลูกค้า, ทีมกฎหมาย, ทีมขออนุญาต, ฯลฯ เพือให้โครงการสำเร็จ.
• พัฒนาทีมงาน ให้มีความสามารถที่เหมาะสม และดีขึ้นในการทำงาน.
• จัดทำมาตรฐานการทำงาน.
• อื่นๆ เช่น การลดต้นทุน, การทำรายงานเพื่อประชุมกับทีมงาน/ลูกค้า/ผู้รับเหมา, ทำระบบเพื่อให้การทำงานมีมาตรฐาน, สร้างความสามารถในการแข่งขันให้บริษัท.
• ปริญญาตรี สาขาวิศวกรรมเครื่องกล หรือสาขาที่เกี่ยวข้อง.
• มีประสบการณ์ทำงาน 2-4 ปี ในงานด้านไฟฟ้า โดยเฉพาะงานโครงการ หรืองานซ่อมบำรุงในโรงงานอุตสาหกรรมขนาดใหญ่.
• มีความรู้และความเข้าใจด้านวิศวกรรมเครื่องกล.
• สามารถใช้งานคอมพิวเตอร์และโปรแกรมที่เกี่ยวข้องกับการทำงานได้.
• สามารถประยุกต์ใช้ AI เพื่อสนับสนุนและเพิ่มประสิทธิภาพในการทำงานได้.
• มีทักษะในการสื่อสารและประสานงานกับผู้ร่วมงานและผู้เกี่ยวข้อง.
• สามารถขับรถยนต์ได้.
• สามารถปฏิบัติงานต่างจังหวัดและทำงาน 6 วันได้.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Teamwork, AutoCAD, English

ประเภทงาน:

งานประจำ

• Co-ordinate with other engineers, subcontactor and customer.
• Participant in project planing meeting.
• Responsible of planing and preparing shop drawing, data installation, and project schedule. Also communicate with sub subcontractor.
• Controlling a installation work to meet relevant regulations and standards.
• Support customer after handover.
• Bachelor's Degree in Mechanical Engineering.
• At least 3 - 5 years experience in Mechanical Engineering.
• Good commands of English (writing, speaking, listening and reading).
• Good computer skills and a familiarity with Microsoft Windows / AUTOCAD and other.
• Good Leadership, Management skill, Teamwork ability and Self-motivated work ethic and able to perform other Duties as assigned.
• Able to relocate to work at other Province as Head office, Branch Office and Site Office. (Rayong or other).
• Preferable Skills / Experiences.
• Knowledgeable of HVAC System / Plumbing System / Fire Protection System/ Mechanical utility work.
• Experience in Site Engineer for construction industry field.
• Associate Engineer License.
• Allowance.
• Social Insurance / Group Health Insurance.
• Bonus depends on corporate profit and individual achievement.
• Uniform.
• Provident Fund (After probation 1 year).
• Dental care (terms are as specified by the company).
• Annual Health check up.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Petrochemical, Procurement, Teamwork, English

ประเภทงาน:

งานประจำ

• Perform engineering design, engineering studies, and detailed engineering for rotating equipment.
• Prepare and review engineering documents, including datasheets, design calculations, performance curves, ITPs, drawings, piping schematics, testing reports, and technical reports.
• Evaluate rotating equipment and material specifications in accordance with project requirements.
• Participate in technical clarification, technical bid evaluation, and vendor document review.
• Prepare Material Take-Off (MTO) and support procurement activities.
• Support FAT, SAT, pre-commissioning, commissioning, and construction activities.
• Prepare construction scope of work and provide engineering support throughout project execution.
• Bachelor's Degree in Mechanical Engineering or a related field.
• Mechanical Engineer: Minimum 5 years of experience in the Oil & Gas or Petrochemical industry.
• Senior Mechanical Engineer: Minimum 10 years of experience in the Oil & Gas or Petrochemical industry.
• Experience in at least 3 Brownfield Modification Projects.
• Centrifugal Pumps.
• Centrifugal Compressors.
• Reciprocating Compressors.
• Screw Compressors.
• Positive Displacement Pumps.
• Air Compressors & Dryers.
• Fans.
• Agitators.
• Mechanical Seals & Bearings.
• Familiar with international standards such as API, ASME, ANSI, and ISO (e.g. API 610, API 617, API 618, API 674, API 675, API 676, API 682, API 692, ASME B73.1, ISO 1940-1).
• Knowledge of lateral & torsional analysis, spare parts selection, and construction procedures (WPS/PQR/WPQ, NDE, Weld & NDT Map, Fabrication Procedure).
• Experience in FAT, SAT, Pre-commissioning, and Commissioning.
• Construction or offshore project experience is an advantage.
• Familiarity with hazardous area classification is preferred.
• Preferred Skills.
• Strong analytical and problem-solving skills.
• Good communication and teamwork.
• Ability to work independently and under pressure.
• Good command of English.

ทักษะ:

CAD, BEM, SAP

ประเภทงาน:

งานประจำ

Job Scope ปฏิบัติงานตามแผนงานซ่อมบำรุง งานบำรุงรักษาเชิงป้องกัน ปรับปรุงเครื่องจักร และอุปกรณ์การผลิตของแต่ละโรงงานใน Agro BU ให้เป็นไปตามแผนงาน และเป็นระบบ รวมทั้งศึกษา และวิเคราะห์เพื่อพัฒนาปรับปรุงงานเพื่อให้ประสิทธิภาพสูงสุด Job Details 1.ดำเนินการซ่อม บำรุงรักษา คืนสภาพ (Process) โดยใช้ระยะเวลาให้น้อยที่สุด และต้นทุนการซ่อมบำรุงเหมาะสม เพื่อให้พร้อมใช้งานอยู่เสมอ รวมทั้งปลอดภัยต่อผู้ใช้งาน และลดความสูญเสียในทุกด้านให้เหลือน้อยที่สุด 2.ดำเนินการงานสร้าง, Small Project (Process) ให้ได้ตามวัตถุประสงค์พร้อมทั้ง Update ข้อมูลการเปลี่ยนแปลงให้ทันสมัย(Process) ให้มีประสิทธิภาพ 3.ศึกษ ...

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• To support all mechanical related activities, including mechanical design, mechanical design verification tests, reliability engineering test support,design review meeting,customer conference call, factory DFM review and factory build support.
• To conduct design check report, tolerance analysis report, thermal simulation report, design document for customer approval, bill of material for factory build, part design drawing, assembly drawing.
• To provide support to team in platform development.
• To follow up customer / factory request of changes or solution for improving production model.
• Bachelor Degree or above in Mechanical Engineering or related.
• Fresh graduated or 1-2 year related working experience.
• Knowledge in metal / plastic parts design for power supply / tooling / manufacturing will be in advantage.
• Proficiency in Creo Parametric / Simulate / Flotherm Simulation.
• Hard working and willing to put extra effort to complete the tasks on time.
• Able to work independently and under pressure.
• Initiative to learn.
• Good command of spoken and written English.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.
• Terms of Use.
• Privacy Policy.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Thai

ประเภทงาน:

งานประจำ

• We believe that leaving a mark is a true challenge and opportunity for every one of us.
• We believe that leaving a mark is a sign of trust and impact.
• We believe that leaving a mark is a bond with the future.
• We believe that leaving a mark is proof of growth and development.
• Being part of the BV family, is more than just working, it's being convinced that you will leave your mark. in shaping a world of Trust.
• Join an inclusive, flexible and diverse company where you can thrive while contributing to positively transforming the world, we live in.
• Project: Hyperscale Data Center.
• Location: Bangkok, Thailand.
• Contract Duration: 20 months.
• We are seeking a qualified and proactive Mechanical Engineer to support the design review, construction supervision, and commissioning of mechanical systems for a large-scale hyperscale data center project in Thailand.
• The Mechanical Engineer will be responsible for ensuring that all mechanical systems, particularly cooling and HVAC systems critical to data center operations, are delivered in accordance with project specifications, quality standards, and performance requirements. The role will work closely with the Project Manager, discipline engineers, and contractors to ensure seamless coordination and technical excellence.
• Review and validate mechanical system designs, drawings, and specifications (HVAC, chilled water systems, piping, ventilation, etc.).
• Monitor and supervise mechanical works on-site, ensuring compliance with approved designs and construction standards.
• Review and comment on contractor submittals, including shop drawings, material submissions, and method statements.
• Ensure compliance with project specifications, international standards, and local regulatory requirements.
• Conduct regular site inspections to verify quality of installation, workmanship, and progress.
• Coordinate closely with electrical, CSA, and ELV teams to ensure proper system integration.
• Support and oversee testing and commissioning activities, including pre-functional and functional testing.
• Identify and manage non-conformance reports (NCRs) and ensure corrective actions are properly implemented.
• Monitor project progress against schedule and highlight risks, delays, and technical challenges.
• Participate in technical and coordination meetings, providing input on mechanical systems and interfaces.
• Assist in snagging, de-snagging, and final inspections prior to project handover.
• Maintain accurate technical documentation, reports, and records in line with project requirements.
• Ensure compliance with HSE standards and promote safe working practices on site.
• Minimum 5 years of experience in mechanical engineering within construction or MEP projects.
• Proven experience in large-scale projects, preferably data centers, mission-critical facilities, or industrial developments.
• Strong expertise in data center cooling systems (e.g., chillers, CRAH/CRAC, cooling towers, chilled water distribution).
• Good understanding of HVAC design, installation practices, and system integration.
• Experience in site supervision, QA/QC processes, and contractor coordination.
• Familiarity with testing and commissioning processes for mechanical systems.
• Experience working in fast-track, high-specification projects with strict quality standards.
• Knowledge of local Thai regulations and codes is an advantage.
• Our people are ambitious and humble, believing in what they do and convinced that our purpose is shaping a world of trust. With responsibility and openness, they daily serve our 400.000 clients in 140 countries, to bettering society. Across all our businesses and countries, each one of our people leaves their mark in shaping society.
• We believe that leaving a mark is a true challenge and opportunity for every one of us.
• We believe that leaving a mark is a sign of trust and impact.
• We believe that leaving a mark is a bond with the future.
• We believe that leaving a mark is proof of growth and development.
• Being part of the BV family, is more than just working, it's being convinced that you will leave your mark. in shaping a world of Trust.
• Join an inclusive, flexible and diverse company where you can thrive while contributing to positively transforming the world, we live in.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Procurement, CAD

ประเภทงาน:

งานประจำ

• Bangkok, Bangkok, Thailand.
• Eco Plant Services Co., Ltd.
• Apply for Position.
• Or refer someone.
• Job Openings.
• Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• About the job Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• VSPP Power Plant & Renewable field.
• Fuel MSW & Industrial Waste Power Plant is a special consideration.
• EPC Business Turnkey (Engineering, Procurement and Construction).
• Satisfy Owner Requirements based on Design, Regulations, Laws, Standards, Codes and advise customer solutions.
• Provide design for safe operation & maintenance with recommended solutions to owner.
• Familiar with the process of related permits: EIA, EHIA, COP, Construction Permit, Factory License requirements, PEA, and ERC.
• Prepare Tendering, Bidding, and Proposal in terms of Technical Data & support for Mechanical Process, Boiler, Ash Handling System, Steam Turbine, Air-Cooled/Water-Cooled Condenser, Air Compressor, Fuel Feeding System, Flue Gas Treatment System, Water Treatment Plant according to TOR.
• Clarify requirements and follow up on, or clear, pending issues and lists via Piping Specifications & Routes, Equipment General Arrangement (GA), P&ID as mechanical integration with other systems such as Tie-in or Terminal Points.
• Verify and cross-check Heat and Mass Balance, Firing Diagram of Combustion, Water Balance, Utility Consumption in Mechanical field.
• Raise any mechanical concern or critical issue to team, if any, for consultation and resolution with team decision-makers, such as deviations from TOR, high impacts to cost, improper design, unsafe operation, or mismatches with other systems.
• Maintain close contact with Owners, Suppliers, Contractors, Vendors, and internal departments for implementation and rectification of related issues.
• Bachelor's Degree in Mechanical Engineering.
• At least 3-5 years of experience in Power Plant Design is preferred.
• Proficient in CAD software and Drawing Viewer applications.
• Understand the basic overall process of a Power Plant.
• Basic knowledge of rotating machinery such as Boiler Feed Water Pumps, Fans, Valve Types, Piping, Pressure Parts, ASME, ASTM, ANSI, JIS, DIN, GB, and EN.
• Commissioning and testing of machinery and piping such as Pressure Test, Cleaning, Leak Test in Water, Air, Chemical, etc.
• Basic knowledge of Operation & Maintenance in Power Plants, Consumption & Consumables for running Power Plants, Discharge Ash Treatment, Flue Gas Emission Control, Water Regulations.
• Communication skills with the ability to quickly summarize key points.
• Coordination with Suppliers, Owners, Contractors, Team Members, and internal departments.
• Apply for Position.
• Or refer someone.
• Share.
• Facebook.
• Line.
• LinkedIn.
• X (Formerly Twitter).
• Whatsapp.
• Email.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, AutoCAD, Revit, BIM

ประเภทงาน:

งานประจำ

• Designing the Mechanical and Plumbing systems, and utilizing Revit to create and maintain BIM models.
• Preparing and developing detailed Revit models of Mechanical & Plumbing systems.
• Preparing detailed calculations of Mechanical & Plumbing systems.
• Developing & publishing construction documentation for Mechanical & Plumbing building systems designs to meet scheduled deliverables.
• Updating and modifying existing models and construction documents as required.
• Assist with creating and maintaining standard regional BIM templates.
• Participate in design coordination meetings with other trades for clash detection and resolution.
• Assist the project team with information exchange processes between internal and external customers.
• Provide coordination support for information requests during construction phases.
• We know today's complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.
• What can you bring to the team?.
• Bachelor's degree in Mechanical Engineering.
• At least 5-6 years of experience in the design of HVAC and other building services systems.
• Have basic knowledge to apply principals to design modelling and drawing production.
• Have basic knowledge of the following software tools: AutoCAD, Navisworks, Bluebeam.
• Familiarity with the BIMForum LOD Specification, plus AIA and NBIMS standards and best practices for BIM collaboration.
• Keen to have knowledge on construction technology and construction practices.
• Keen to learn new BIM tools, procedures, best practices.
• Our Aurecon Attributes define our way of being - they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don't expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here.
• Finally, we value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?.
• About Us.
• Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.
• Over the last 85 years, our team of more than 5 000 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world's most complex challenges.
• In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking - an approach that is guided by digital engineering, the user experience and sustainability - ensuring that the work we do is future ready and leaves a legacy for the next generation.
• Think engineering. Think again.
• Want to know more?.
• You can learn more about what it's like to work at Aurecon by visiting the careers section of our website.
• If you are intrigued or excited by what you have read, then we want to hear from you. Apply now!.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Project Management, Procurement

ประเภทงาน:

งานประจำ

• DayOne is a global leader in the development and operation of high-performance data centers. As one of the fastest-growing companies in the industry, we've built a robust presence across Asia and Europe and we're just getting started.
• As we expand into new international markets, we're looking for talented, driven individuals to join us on this exciting journey. This is more than a job it's an opportunity to be a key contributor to our dynamic team and help shape the future of global data infrastructure.
• If you're passionate about innovation, technology, and growth, we invite you to be part of DayOne's next chapter.
• Support the Testing & Commissioning Manager to develop and implement effective testing and commissioning strategies.
• Coordinate closely with the SE Asia Testing & Commissioning Director to align regional strategies with local execution.
• Directly manage the testing and commissioning process for all data centre projects.
• Collaborate with project managers, construction teams, and clients to ensure project timelines and budgets are adhered to.
• Conduct regular site visits during construction stages to monitor progress, quality, and compliance with industry standards.
• To be full time on site during all testing and commissioning process.
• Ensure adherence of testing and commissioning protocols and compliance with industry standards, safety regulations, and client requirements.
• Review and approve test plans, reports, and commissioning documentation.
• Serve as the primary point of contact for clients during the testing and commissioning phase.
• Resolve any complex technical issues that arise, ensuring client satisfaction.
• Bachelor's degree in Mechanical Engineering, or a related field. A Master's degree is preferred.
• Minimum of 3-5 years of experience in data centre testing, commissioning, and operations.
• Good knowledge of data centre infrastructure, including HVAC, power systems, and network operations.
• Proficiency in relevant software and tools used in the testing and commissioning process.
• Excellent project management skills, capable of managing multiple projects simultaneously.
• Exceptional communication and interpersonal skills, with the ability to interact effectively with clients, stakeholders, and team members.
• Relevant certifications in procurement, supply chain management, or contract management (e.g., CPM, CSCP).
• Proactive and self-motivated, with a focus on continuous improvement and operational excellence.
• Willingness to travel within the region as required.
• DayOne is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
• If you're ready to grow with one of the fastest-moving companies in the data center industry, apply now and be part of our global journey.

ประสบการณ์:

4 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, English

ประเภทงาน:

งานประจำ

• Supervise mechanical installation, manage contractors, ensure compliance, review documents, monitor progress, enforce QAQC, support commissioning, resolve issues, coordinate teams, safety.
• Job Responsibilities.
• Supervise on-site construction and installation of mechanical systems (HVAC, chiller plant, cooling tower, pumps, piping).
• Manage mechanical works during Data Center construction, ensuring compliance with design drawings and specifications.
• Coordinate with EPC contractors, subcontractors, and vendors for daily site activities.
• Review and validate shop drawings, method statements, and material submittals (mechanical scope).
• Monitor site progress, installation quality, and construction schedule.
• Conduct inspection and QA/QC checks for mechanical works.
• Support pre-commissioning and commissioning activities (pressure test, flushing, balancing, FAT/SAT).
• Identify and resolve construction and installation issues on-site.
• Coordinate with electrical and civil teams for integration of cooling systems.
• Ensure compliance with site safety (HSE) and construction standards.
• Job Qualifications.
• Bachelor's degree in Mechanical Engineering.
• Minimum 4 - 7 year experiences in site mechanical / MEP / HVAC works.
• Experience in Data Center, industrial plant, or critical facilities preferred.
• Fluent in English, both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/ work upcountry and abroad.
• Goal-Oriented, Unity, Learning, Flexible.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Petrochemical, Procurement, English

ประเภทงาน:

งานประจำ

• Provide advice to Engineering teams to determine feasibility, process/ design advantage, cost & time constraint and other technical or economic factors which may affect the project's medium-term to long-term production process. Identify the problem areas and suggest the appropriated solutions/actions to Engineering team as necessary.
• Compile relevant necessary data/ information to conduct analytical studies on specification and performance requirements considering medium-term and long-term solutions.
• Provide advice/ recommendation on procurement strategies and participate in the procurement processes to obtain the most appropriated vendors for equipment, materials and services. Review bidder lists, pre-qualification, detailed contractor's overall plans and provide recommendation to project teams. Participate in the bid evaluation and contractor's selection.
• Recommend corrective actions when the project performance deviates from the project direction/requirements.
• Study, analyze and recommend modification/ construction options and solutions to the process that will enhance / optimize production at minimum costs and with proper safety considerations. Determine effect of such modification/ construction on the process and report feasibility of such modification/ construction.
• When/ as required, participate in the technical committee meeting with internal and external parties to provide advice/ recommendation in own expertise.
• When/ as required, participate in Vendor's manufacturer/fabrication shop inspection, field pre-commissioning, commissioning, test run and start up of mechanical equipment.
• Promotes and ensures an affective implementation of SSHE rules and engineering best practices.
• Coach, motivate, and develop junior professionals and share knowledge to team.
• Job End Result.
• Accuracy, reliability and timeliness of advice, guidance and/ or recommendations provided to Engineering teams when required.
• Efficiency and reliability of recommendations on modification/ construction options and solutions to mechanical equipments with regards to quality and cost effectiveness to enhance / optimize production at minimum costs and with proper safety considerations.
• Contribute to obtain the most appropriate contractors to carry out engineering modification/ construction works.
• Safe and efficient operation through careful follow-up of activities. Prompt actions in emergency situations.
• To ensure the engineering knowledge transfers to junior professionals.
• Professional Knowledge & Experience.
• Bachelor's degree, or equivalent, in Mechanical Engineering.
• At least 15 years' experience in design and construction of large construction projects.
• At least 12 years in upstream or midstream or downstream in oil and gas industry or petrochemical industry or power plant.
• Good command of written and spoken English.
• Knowledge of both green and brown fields in engineering and topside facility designs of the stationary mechanical systems and rotating machines, topside equipment, piping and support structures, corrosion/erosion, welding, QA/QC, construction codes & standards, offshore hook-up/commissioning and modification work.
• Strong technical knowledge and field experiences in Factory Acceptance Test (FAT), pre-commissioning, commissioning, test run and start up of mechanical equipment is a plus qualification.
• Good computer skills.
• Good interpersonal and communication skills.
• Work Location.
• Bangkok.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Electrical Engineering, Mechanical Engineering, Analytical Thinking, Project Management, Problem Solving, Automation, English

ประเภทงาน:

งานประจำ

• Bachelor's or Master's Degree in Automation Engineering, Mechatronics Engineering, Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum 6-8 years of experience in automation engineering, machine design, equipment development, or industrial automation.
• Proven experience leading and managing engineering teams.
• Strong technical expertise in both hardware and software aspects of automation equipment and machine development.
• Demonstrated experience in complex engineering projects from concept through implementation.
• Strong project management and cross-functional coordination capabilities.
• Excellent analytical thinking, problem-solving, and decision-making skills.
• Strong communication, presentation, and stakeholder management skills.
• Proficiency in English for business and technical communication.
• Preferred Qualifications.
• Experience within a multinational manufacturing or industrial equipment environment.
• Exposure to advanced automation technologies, robotics, Industry 4.0, or smart manufacturing solutions.
• Experience working in global or regional engineering organizations.
• Key Competencies.
• Leadership & People Development.
• Strategic Thinking.
• Innovation & Technology Adoption.
• Project Management.
• Engineering Excellence.
• Stakeholder Management.
• Problem Solving & Decision Making.
• Continuous Improvement Mindset.
• Why Join EssilorLuxottica?.
• At EssilorLuxottica, you are not defined by your job title. We offer a dynamic and collaborative environment where innovation, diversity, and personal growth are encouraged.
• Work on cutting-edge automation technologies and global engineering projects.
• Collaborate with international teams and technical experts.
• Access continuous learning and development opportunities through our Leonardo learning platform.
• Accelerate your career within a global leader in the eyewear and eyecare industry.
• Contribute to meaningful innovations that improve the way people see and experience the world.
• Ideal Candidate Profile.
• We are looking for a hands-on automation leader who combines strong technical expertise with people leadership skills. The successful candidate will be capable of driving engineering innovation, leading high-performing teams, and delivering complex automation projects in a fast-paced global environment.
• Automation Engineering Manager.
• Engineering Manager (Automation/Equipment).
• Mechatronics Engineering Manager.
• Machine Design Manager.
• Industrial Automation Manager.
• R&D Equipment Development Manager.
• Robotics & Automation Engineering Lead.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Product Development, Financial Reporting, Project Management, Industrial Design, Problem Solving, Negotiation, Accounting, SAP

ประเภทงาน:

งานประจำ

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Functional Area: Engineering.
• Career Stream: Design Engineering Mechanical.
• SAP Short Name: SLE-ENG-DME.
• Job Level: Level 09.
• IC/MGR: Individual Contributor.
• Direct/Indirect Indicator: Indirect.
• Summary.
• The Senior Lead Engineer, Mechanical Design develops new mechanical systems/modules and maintains existing designs. Research mechanical concepts and create system solutions using 3D modeling and simulation software. Complete calculations and test, validate, and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing process of the mechanical system that they have designed.
• The Senior Lead Engineer, Mechanical Design works with cross functional teams of other engineers, customers, supply chain and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.
• Detailed Description.
• Lead the design, development and implementation of technical solutions in multiple domains. Participate in project planning and scheduling.
• Provide technical leadership and direction to a team of engineers. May be a recognised expert (go to person) in one or more technical areas.
• Review, interpret and may negotiate customer requirements/specifications and provide customer feedback.
• Lead the deployment of strategic programs and coordinate site-wide deployment efforts.
• Proactively promote industry best practices.
• May manage relationships with key vendors/partners.
• Prepare calculations on the proposed solution before completing technical drawings.
• Create designs in line with company procedure, regulations and client standards.
• Submit drawings to management, engineering teams and customers for review.
• Use customer feedback and data to upgrade, improve or repair the company's existing machines.
• Provide support during the manufacturing process.
• Finalize designs and send prints to the production department.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage/lead complex, multiple line engineering projects that may also involve other functions. Demonstrate solid understanding of the technical, financial and people aspects of the project. Able to create a project/change management plan and ensure that the project is delivered within the assigned time and budget. Ability to recognize project barriers and develop mitigation plans.
• Leadership - Demonstrate "People & Team Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning - Ability to create financial plans for your projects, align them internally with your line of management and other functions and externally if needed. Create project plans, profitability calculations, risk and sensitivity analysis, able to recognize barriers and mitigate profitability risks. Fully knowledgeable about internal and external financial reporting, accounting and tax requirements relevant to your area of expertise.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• This is also requirement for manager level. I capture from Global job description.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Mechanical Engineering

ประเภทงาน:

งานประจำ

Short Description The Inspection Engineer is responsible for performing third-party inspection, testing, and certification activities for lifting equipment and cranes, primarily within the oil and gas sector, ensuring compliance with applicable international standards, client specifications, and local regulatory requirements. Key Responsibilities Conduct inspection, testing, and certification of lifting equipment and cranes, including but not limited to: Mobile cranes, offshore cranes, tower cranes Lifting appliances, lifting gears, and accessories Perform inspections during variou ...