Filter Jobs

Experience:

8 years required

Skills:

Statistical Analysis, Product Development, Project Management, Risk Management, Enthusiastic

Job type:

Full-time

• Serve as the Supplier Quality Engineer for Lumentum's Optical Components.
• Own the supplier quality strategy supporting the optical commodity technology roadmap across multiple Business Units.
• Provide supplier quality leadership throughout the complete product lifecycle, from technology development through sustaining production.
• Partner with Product Engineering, Component Engineering, and Commodity Management to influence supplier selection, manufacturing strategy, technology roadmaps, and supplier capability development.
• Support multiple concurrent NPI programs while balancing business priorities, supplier readiness, and manufacturing capacity.
• Supplier Quality & Supplier Development.
• Lead supplier qualification, manufacturing capability assessments, process audits, and supplier readiness evaluations for strategic optical component suppliers.
• Evaluate supplier manufacturing maturity, process capability, capacity, scalability, and operational excellence across diverse optical manufacturing technologies.
• Develop supplier improvement roadmaps focused on quality, yield, process capability, manufacturing robustness, and operational excellence.
• Identify supplier risks and develop mitigation strategies supporting business continuity, supply resiliency, and product quality.
• Drive Lean Manufacturing, Six Sigma, and continuous improvement initiatives with strategic suppliers.
• New Product Introduction (NPI).
• Partner with Product Development, Component Engineering, Manufacturing Engineering, and Program Management to ensure supplier readiness for new product introductions.
• Participate in Design Reviews, Design for Manufacturability (DFM), and Design for Excellence (DFX) activities with Engineering teams and suppliers.
• Lead supplier process qualification, First Article Inspection (FAI), process validation, and production readiness activities.
• Support production ramp, supplier transfers, manufacturing transfers, localization initiatives, and capacity expansion projects.
• Ensure suppliers consistently meet quality, reliability, manufacturability, and delivery requirements prior to production release.
• Engineering & Technical Leadership.
• Act as the primary technical quality interface between Lumentum and strategic optical component suppliers.
• Influence engineering and supplier decisions without direct authority through technical expertise and data-driven decision making.
• Lead supplier technical reviews, quality reviews, executive escalations, and corrective action activities.
• Drive supplier capability development across advanced optical manufacturing technologies, precision assembly processes, and automated manufacturing systems.
• Support Engineering organizations with supplier manufacturing expertise during technology development, product industrialization, and manufacturing transfers.
• Cross-Functional Collaboration.
• Work closely with Product Engineering, Component Engineering, Commodity Management, Global Sourcing, Manufacturing, Reliability Engineering, Operations, Program Management, and Customer Quality.
• Support supplier changes, value engineering initiatives, localization programs, and manufacturing optimization projects.
• Utilize supplier quality metrics, statistical analysis, and manufacturing data to improve supplier capability and product quality.
• Drive proactive supplier risk management, manufacturing readiness, and long-term supplier development throughout the product lifecycle.
• Required.
• Bachelor's degree in Optical Engineering, Physics, Materials Science, or a related engineering discipline.
• Minimum 8 years of experience in Supplier Quality Engineering, Manufacturing Quality, Product Quality, or Quality Engineering within a high-technology manufacturing environment.
• Technical understanding of optical component manufacturing technologies, including fiber optics, passive optical components, precision optics, optical assemblies, and photonic devices.
• Experience with optical manufacturing processes such as active alignment, passive alignment, laser welding, adhesive bonding, fiber polishing, precision machining, ceramic manufacturing, and optical metrology.
• Experience supporting supplier qualification, process validation, New Product Introduction (NPI), manufacturing transfer, and production ramp activities.
• Knowledge of supplier quality systems, statistical process control, process capability analysis, FMEA, Control Plans, Measurement System Analysis (MSA), and structured problem-solving methodologies.
• Excellent communication, organizational, project management, and leadership skills.
• Demonstrated ability to influence cross-functional technical decisions across engineering, manufacturing, sourcing, and supplier organizations.
• Willingness to travel domestically and internationally (approximately 20-30%).
• Why Join Lumentum?.
• At Lumentum, Supplier Quality Engineering is evolving into a strategic engineering organization that partners closely with Product Engineering, Component Engineering, and our global supply base to enable innovation and business growth.
• As the SQE for Optical Components, you will help shape supplier technology roadmaps, influence supplier selection, accelerate new product introductions, and develop the manufacturing capabilities required to deliver the next generation of AI networking, coherent optics, and advanced photonic solutions. Your work will directly impact the performance, scalability, reliability, and supply resilience of the technologies powering the world's most advanced communications infrastructure.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Experience:

5 years required

Skills:

Quality Assurance, Risk Management, Enthusiastic, Leadership Skill, Assurance

Job type:

Full-time

• Lead and manage a global team of Supplier Quality Engineers located across multiple sites.
• Establish organizational priorities, performance objectives, and development plans while fostering a culture of accountability, collaboration, and continuous improvement.
• Drive consistent implementation of global supplier quality standards and best practices.
• Supplier Quality & Commodity Management.
• Own the Supplier Quality strategy for Optical Commodities across all Lumentum business units.
• Ensure robust supplier qualification, performance monitoring, risk management, and continuous improvement programs.
• Incoming Quality Assurance (IQA).
• Provide leadership for Incoming Quality Assurance activities across manufacturing sites.
• Ensure effective incoming inspection processes that balance product quality, manufacturing efficiency, and supplier performance.
• Utilize quality data and supplier performance metrics to optimize inspection strategies and drive continuous improvement.
• Supplier Relationship Management.
• Serve as the primary quality representative for optical suppliers.
• Lead supplier communications, quality escalations, and executive-level engagements.
• Develop collaborative supplier partnerships focused on improving quality, reliability, delivery performance, and operational excellence.
• Cross-Functional Collaboration.
• Partner with Engineering, Manufacturing, Operations, Program Management, Supply Chain, Reliability, and Customer Quality to ensure supplier readiness and successful product execution.
• Support business growth by proactively identifying supplier risks and implementing effective mitigation strategies.
• Required.
• Bachelor's degree in Optical Engineering, Physics, Materials Science, or a related technical discipline.
• 10+ years of experience in Supplier Quality, Quality Engineering, or Manufacturing Quality within a high-technology manufacturing environment.
• Minimum 5 years of leadership experience managing engineering or quality organizations.
• Strong technical knowledge of optical components, photonics, fiber optics, lasers, or related optical technologies.
• Experience managing geographically distributed teams.
• Proven experience leading supplier quality initiatives and supplier development programs.
• Excellent communication and stakeholder management skills with experience working directly with strategic suppliers and executive leadership.
• Preferred.
• Master's degree in Engineering or related discipline.
• Experience supporting multiple product lines within a global manufacturing organization.
• Knowledge of semiconductor, photonics, precision optics, and advanced packaging manufacturing processes.
• Why Join Lumentum?.
• This is a highly visible leadership opportunity to shape the global quality strategy for one of Lumentum's most critical commodity areas. The role provides broad exposure across all Business Units while leading a global organization responsible for Supplier Quality Engineering, Incoming Quality Assurance, and strategic supplier engagement. The successful candidate will play a.
• key role.
• in developing talent, strengthening supplier partnerships, and driving quality excellence across Lumentum's worldwide supply chain.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Experience:

3 years required

Skills:

Product Development, English, Thai

Job type:

Full-time

• We are seeking a.
• Lab Manager.
• to lead and oversee air conditioning testing and validation activities for new product development (NPD) programs.
• This role is responsible for ensuring testing accuracy, operational efficiency, and compliance with international standards, while providing strong leadership to drive lab performance and support timely product launches.
• Lead and manage day-to-day operations of the HVAC testing laboratory.
• Oversee testing of RES, IMS, LC, and VRF systems to ensure compliance with performance standards.
• Monitor and validate key parameters including temperature, pressure, airflow, refrigerant performance, and energy efficiency (COP/EER).
• Ensure all testing activities comply with company standards and international regulations.
• Supervise test setup, instrumentation calibration, and safety procedures.
• Ensure test equipment and benches are properly maintained and operational.
• Lead root cause analysis and corrective actions for performance deviations.
• Review product specifications, test procedures, and technical documentation.
• Prepare and review test reports for internal and external stakeholders.
• Collaborate with engineering, quality, and production teams to resolve issues.
• Support customer witness testing and validation activities.
• Ensure compliance with EHS (Environmental, Health & Safety) standards.
• Lead and develop team capability through training programs for engineers, technicians, and customers.
• Bachelor's degree in Mechanical, Electrical, or HVAC Engineering.
• 7-10+ years of experience in HVAC testing/laboratory environment.
• Minimum 3 years in supervisory or management role.
• Strong knowledge of air conditioning systems and testing methodologies.
• Experience with performance testing, instrumentation, and diagnostics.
• Ability to troubleshoot mechanical, electrical, and control system issues.
• Strong leadership and team management skills.
• Excellent coordination and stakeholder management capability.
• Ability to manage multiple projects in a fast-paced environment.
• Good command of English and Thai.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.

Experience:

3 years required

Skills:

English, Thai

Job type:

Full-time

• Key.
• Roles and.
• Regulatory Compliance Responsible to ensure Regulatory Compliance to applicable McCormick's Policy and assigned Countries food laws, legislation, and regulation. Support monitoring of Thailand, Vietnam and Cambodia food laws, legislation, and regulation applicable to McCormick's Consumer Products, along with other team members in Regulatory Team. Responsible for Review and Approval of Artwork and Sticker- provide tec ...
• Education and Discipline Bachelor's degree in food science or related fields Minimum Experience Required At least 3 years of Regulatory Affairs experience, preferably within Food, Beverage or Related industry. Knowledge of Asia Pacific Food Regulations and Product Registration Processes, especially for Thailand, Vietnam and Cambodia. Familiarity with Halal, Organic and other certification requirements would be desirable. Certifications and/or Licenses N/A Other Skills & Competencies Influence - High-Performance Organization Competency Good Stakeholder Relationship Management for effective collaboration with multifunctional teams across geography in a diverse and inclusive environment. Communicates effectively. Innovation - High-Performance Organization Competency: A continuous-improvement mindset to regularly evaluates work practices to identify opportunities for greater efficiency and effectiveness. Good Problem-Solving Skill relates to Regulatory Matter..

Experience:

3 years required

Skills:

Electrical Engineering, Mechanical Engineering, Quality Assurance, Assurance, English

Job type:

Full-time

• Prepare and maintain Project Quality Plan, Inspection & Test Plan (ITP), Checklists, CCP (Critical Control Point) List, and other relevant quality control documents.
• Review drawings, specifications, method statements, and quality requirements before starting installation work.
• Conduct incoming material inspections and verify that materials and equipment comply with approved specifications and project requirements.
• Perform site inspections during installation activities and ensure that work is carried out according to approved drawings, specifications, method statements, and quality standards.
• Monitor Hold Points, Witness Points, and Critical Control Points (CCP) and coordinate inspections with Project Engineers, Consultants, Clients, and subcontractors.
• Identify quality issues and deviations, issue or coordinate NCR (Non-Conformance Report), and follow up corrective actions until NCR closure.
• Conduct final inspections and verify completed installation works before testing, commissioning, and handover.
• Prepare and maintain inspection records, test reports, checklists, NCR records, and other quality documentation required for project handover.
• Coordinate with Project, Construction, Engineering, Testing & Commissioning, subcontractors, and other relevant teams to resolve quality issues.
• Review test results and verify that systems meet project requirements and acceptance criteria.
• Support Testing & Commissioning (T&C) and project handover activities.
• Analyze recurring quality issues, summarize lessons learned, and recommend corrective or preventive actions to improve construction quality.
• Specific.
• Responsibilities by DisciplineElectrical QC Engineer.
• Inspect and control the quality of electrical installation works, including cable installation, cable termination, electrical panels, grounding/earthing systems, and related electrical systems.
• Review and verify electrical test results such as Insulation Resistance Test, Continuity Test, Grounding/Earthing Test, and Functional Test.
• Ensure electrical installations comply with approved drawings, specifications, applicable standards, and project requirements.
• Use appropriate electrical measuring and testing instruments to verify installation and system quality.
• Mechanical QC Engineer.
• Inspect and control the quality of mechanical installation works, including piping, HVAC, equipment installation, pumps, valves, supports, and related mechanical systems.
• Review and verify mechanical test results such as Pressure Test, Leak Test, Flushing, Alignment, and Performance Test.
• Ensure mechanical installations comply with approved drawings, specifications, applicable standards, and project requirements.
• Use appropriate mechanical measuring and testing instruments to verify installation and system quality.
• Bachelor's degree in Electrical Engineering or Mechanical Engineering, depending on the position applied for.
• Higher Vocational Certificate (Diploma/ปวส.) in a relevant technical field may also be considered for candidates with strong and proven QC experience.
• Minimum 3-5 years of experience in Quality Control / Quality Assurance for MEP construction or installation projects.
• Experience in Data Center, Mission Critical Facility, large-scale MEP, industrial, or complex building projects will be an advantage.
• Good knowledge of Quality Plan, ITP, CCP List, Inspection Checklist, Hold Point/Witness Point, and NCR management.
• Ability to read and understand engineering drawings, specifications, method statements, and technical documents.
• Hands-on experience with relevant electrical or mechanical inspection and testing equipment.
• Good understanding of construction quality standards, inspection procedures, and Testing & Commissioning processes.
• Strong documentation and reporting skills with the ability to maintain accurate and systematic quality records.
• Detail-oriented with strong analytical and problem-solving skills.
• Good coordination and communication skills with project teams, subcontractors, consultants, and clients.
• Basic to good command of English for technical documents, drawings, specifications, and project communication is an advantage.
• Preferred Experience.
• Previous experience in Data Center MEP projects is highly preferred.
• Familiarity with Data Center construction quality requirements, inspection procedures, Testing & Commissioning, and project handover processes will be an advantage.
• Experience working with Main Contractors, MEP Contractors, Consultants, or Data Center clients will be an advantage.

Experience:

8 years required

Skills:

Production planning, Procurement, Leadership Skill, HACCP, GMP

Job type:

Full-time

• Lead and manage the day-to-day operations of the beverage manufacturing facility, including production, quality control, maintenance, warehouse, and logistics.
• Ensure production schedules and targets are achieved while maintaining the highest standards of safety, product quality, productivity, and operational efficiency.
• Oversee and ensure compliance with GMP, HACCP, ISO, food safety standards, and other applicable regulatory requirements.
• Drive continuous improvement initiatives to increase production efficiency, optimize processes, improve OEE, reduce waste and downtime, and control manufacturing costs.
• Effectively manage factory resources, including manpower, production equipment, raw materials, packaging materials, utilities, and production capacity.
• Oversee preventive and corrective maintenance of production equipment to minimize unplanned downtime and maximize equipment reliability and efficiency.
• Work closely with Supply Chain, Procurement, Planning, Quality, R&D, and Sales teams to ensure production capacity and output meet business and customer requirements.
• Develop, implement, and monitor production KPIs, including output, OEE, yield, downtime, waste, quality performance, labor productivity, and production costs.
• Lead, coach, train, and motivate production teams to build a high-performing and accountable workforce.
• Ensure factory operations comply with labor laws, environmental regulations, occupational health and safety requirements, and company policies.
• Monitor factory budgets and operating expenses, identify cost-saving opportunities, and maintain effective cost control.
• Prepare regular management reports covering production performance, efficiency, quality, downtime, costs, manpower, and operational issues, with recommendations for improvement.
• Identify operational risks and lead root-cause analysis and corrective actions to resolve production and quality issues effectively.
• Establish and maintain strong systems for production planning, inventory control, process control, and operational discipline.
• Promote a culture of safety, quality, efficiency, accountability, and continuous improvement throughout the factory.
• Bachelor's degree or higher in Engineering, Manufacturing, Industrial Management, or a related field.
• Minimum 8 years of experience in manufacturing, with significant experience in a factory management or production management role.
• Minimum 5 years of experience in a food or beverage manufacturing environment is preferred.
• Experience in beverage production, particularly canned and PET-bottled beverages, will be highly advantageous.
• Strong knowledge and practical experience in GMP, HACCP, ISO, food safety, and manufacturing quality systems.
• Strong understanding of Lean Manufacturing, OEE, continuous improvement, root-cause analysis, and production optimization.
• Proven experience managing production teams, factory manpower, machinery, raw materials, and manufacturing costs.
• Strong knowledge of production planning and manufacturing management systems.
• Demonstrated leadership, problem-solving, decision-making, and people-management skills.
• Excellent communication and coordination skills, with the ability to work effectively across departments.
• Strong commitment to safety, quality, productivity, and continuous improvement.
• Preferred Beverage Industry Experience.

Experience:

3 years required

Skills:

Enthusiastic, Electronics, ERP

Job type:

Full-time

• We're committed to bringing passion and customer focus to the business.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!.
• We are looking for a strong, people-focused, and detail-oriented.
• Production Supervisor.
• to lead frontline manufacturing operations in Lumentum's high-precision global production environment. This role is responsible for managing daily production activities, ensuring output targets are achieved, maintaining quality and safety standards, and developing operators to perform at high levels. The Production Supervisor works closely with Manufacturing Engineering, Quality, Planning, and Warehouse teams to ensure smooth production flow, resolve operational issues, and support continuous improvement. This position may require managing.
• rotating shifts.
• based on operational needs.
• Lead and supervise production operators to ensure daily output, quality, and schedule adherence goals are achieved.
• Plan and allocate manpower by shift, ensuring optimal coverage for all production stations and equipment.
• Monitor production WIP, line performance, cycle time, and bottlenecks; drive actions to meet production and customer targets.
• Ensure strict compliance with SOPs, process controls, ESD, safety, and cleanroom standards during all production activities.
• Collaborate with Process Engineering (PE), Quality Engineering (QE), and Equipment teams to resolve production issues, process deviations, or equipment downtime.
• Support NPI and engineering builds by coordinating manpower, training operators, and ensuring process readiness.
• Conduct real-time line audits, quality checks, and operator performance observations to prevent quality escapes.
• Provide coaching, training, and skill development for operators to improve competency, productivity, and flexibility.
• Maintain shift documentation including production reports, attendance, incident logs, and abnormality reports.
• Drive 5S, Kaizen, cost reduction, and continuous improvement initiatives in the production area.
• Ensure proper material, tooling, and fixture readiness by coordinating with Warehouse, Planning, and Engineering teams.
• Participate in daily/weekly production meetings and communicate shift performance, issues, and recovery plans.
• Escalate critical issues promptly and coordinate corrective actions to minimize production impact.
• Perform additional responsibilities or tasks assigned by the Manager.
• Bachelor's degree in Engineering, Industrial Technology, Manufacturing, Science, or a related field (Diploma/Vocational + strong experience may also be considered).
• 3-8 years of experience in high-tech, electronics, semiconductor, optical, or precision manufacturing.
• Minimum 2+ years in a leadership or supervisory role managing production teams.
• Strong understanding of manufacturing processes, WIP control, quality standards, and production metrics.
• Experience working in cleanroom, optical, or high-precision environments is an advantage.
• Strong leadership, communication, and coaching skills with the ability to guide and motivate teams.
• Ability to work.
• rotating shifts.
• and support fast-paced, high-volume production environments.
• Problem-solving mindset with the ability to analyze issues, drive root cause containment, and implement improvements.
• Proficiency in basic computer applications (Excel, Word, ERP systems).
• Commitment to safety, quality, and continuous improvement.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Experience:

2 years required

Skills:

Statistical Analysis, Problem Solving, ISO 9001, English, Laos

Job type:

Full-time

• Quality and Customers.
• Lead Customer Connection Program with plants: Customer BSC, customer visits, Customer.
• Education, action plan on improvements as outcomes of customer satisfaction surveys.
• Ensure compliance with Mass prod Quality Referential.
• Work with Plant Quality Managers on Customer Issues Resolution: Structured 8D approach, animate effective exchange among the plants on lessons learned.
• Monitor process capability of the plants and facilitate support and action plan building on improvement based around BSC performance.
• Set in place process quality audits, work with plants to report issues, alert on non-conformance and support improvement action plans to get back to standard on Key KPI's.
• Monitor and report the product and process performance, actively follow the action plans on improvement.
• Support alignment between Mass prod plants and Rx labs.
• Develop a continuous improvement mindset, propose and work with engineering/sites improvement ideas.
• Interactions.
• Work closely together with quality managers on key topics in the plant and support product and process quality guarantee.
• Work with customers and support plants during quality issues needing regional coordination.
• Animate activities among QA Managers, Quality Experts, NPI Coordinators, WW Manufacturing Quality, SC, GE, Market Quality, and QMS teams and participate in manufacturing projects.
• Must have.
• Bachelor or Master's Degree in engineering or related field.
• Minimum 2 years' experience in a manufacturing environment.
• Hands-on and pro-active approach.
• Ability to work in a fast-paced environment.
• Proficient with MS Office programs (especially MS Excel, MS Powerpoint etc.).
• Excellent written and spoken English.
• 10-20% of time travelling.
• Technical Knowledge of Product and Process.
• Strong on analytical skills, problem solving.
• Technical knowledge on Quality systems, process control, Statistical analysis, Group QMS, ISO 13485.
• Specification (product & process) validation to product requirements (safety, regulation, claim, consumer benefit and satisfaction).
• Knowledge of Quality tools & methodologies (concept analysis, risk assessment.).
• Experience in mass production but no hands-on training given as needed.
• QMS ISO 13485 and/or ISO 9001 an advantage.

Experience:

6 years required

Skills:

Recruitment, Teamwork, Cloud Computing

Job type:

Full-time

• Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experiency. Educational requirements may vary by geography. Notes This.
• is not intended to be an exhaustive list of all.
• of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

Experience:

3 years required

Skills:

Project Management, Negotiation, Procurement, Power point, Budgeting

Job type:

Full-time

• Develop annual and quarterly trade marketing plans for the On-Trade channel aligned with company and brand objectives.
• Identify channel, customer, and consumer insights to drive growth opportunities.
• Recommend channel priorities, activation strategies, and investment allocation.
• Trade Activation & Execution.
• Design and implement consumer promotions, brand activations, and customer engagement programs.
• Manage key events, sponsorship activations, experiential marketing activities, and outlet branding.
• Ensure excellent execution of trade programs across all targeted outlets.
• Customer & Commercial Partnership.
• Work closely with Sales teams to develop customer-specific activation plans.
• Build strong relationships with key customers, distributors, and business partners.
• Support commercial negotiations by providing trade marketing recommendations and ROI analysis.
• POSM & Visibility Management.
• Lead development and deployment of POSM, merchandising materials, and visibility assets.
• Ensure brand standards and execution quality are maintained across outlets.
• Monitor compliance and effectiveness of visibility initiatives.
• Budget Management & ROI Tracking.
• Manage trade marketing budget efficiently and effectively.
• Track program performance, consumer response, and return on investment (ROI).
• Provide post-evaluation reports and recommendations for future improvements.
• Cross-Functional Collaboration.
• Partner with Brand Marketing, Sales, Finance, Procurement, and Supply Chain teams to ensure successful program delivery.
• Support new product launches and innovation initiatives within the On-Trade channel.
• Bachelor's or higher in Marketing, Business Administration, or a related field.
• Minimum 5 - 7 years of experience in Trade Marketing / Customer Activation.
• Experience in FMCG, Beverage, Alcohol, Consumer Goods, or related industries is preferred.
• Strong understanding of On-Trade business, HORECA, Pub & Bar, and Entertainment channels.
• Proven experience managing activation campaigns, promotions, and customer programs.
• Strong analytical, project management, and budgeting skills.
• Excellent stakeholder management and communication skills.
• Proficient in Microsoft Excel and PowerPoint.
• Good command of English.
• Excellent communication and negotiation abilities.
• Ability to work in a fast-paced, target-driven environment.
• Willingness and ability to work flexible hours, including evenings, late nights to support on trade activations and market executions.

Experience:

5 years required

Skills:

Production planning, Assembly, English

Job type:

Full-time

• We are seeking a.
• Production Manager (Heat Exchanger).
• to lead high-volume manufacturing operations within heat exchanger and coil production. This role is responsible for ensuring safe, stable, and efficient production, while consistently delivering on quality, cost, and on-time delivery targets.
• You will play a.
• key role.
• in driving shopfloor performance, process stability, and workforce capability, while collaborating with cross-functional teams to ensure smooth production flow and alignment with business and operational objectives.
• Lead daily operations of heat exchanger / coil manufacturing to ensure safe, stable, and efficient production.
• Execute production plans aligned with demand and delivery commitments.
• Drive performance across safety, quality, delivery, and cost (SQDC).
• Ensure process stability and control in manufacturing and assembly operations.
• Lead root cause analysis and corrective actions for production and quality issues.
• Partner with Quality and Engineering teams to improve process capability and reduce defects.
• Drive productivity improvement through manpower optimization and process efficiency.
• Monitor and control manufacturing costs including labor, scrap, and operational losses.
• Coordinate with Production Planning, Supply Chain, Engineering, and Quality teams.
• Ensure material availability and smooth production flow.
• Support new product introduction and production ramp-up activities.
• Lead and develop supervisors and frontline teams, strengthening discipline and problem-solving capability.
• Drive Lean, Kaizen, and continuous improvement initiatives.
• Bachelor's degree in Engineering (Mechanical, Industrial, Manufacturing preferred).
• 8-12 years of experience, with at least 3-5 years in a leadership role.
• Experience in heat exchanger, coil, piping, or process-driven manufacturing.
• Strong leadership in high-volume production environments.
• Strong analytical and problem-solving skills.
• Ability to work cross-functionally and communicate effectively.
• Good command of English.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.

Experience:

2 years required

Skills:

Industrial Engineering, Electrical Engineering, Mechanical Engineering, Quality Assurance, Problem Solving, Risk Management, Data Analysis, Architecture, Negotiation, Data Entry, ISO 9001

Job type:

Full-time

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Lead Engineer, Design Quality.
• Functional Area: Engineering (ENG).
• Career Stream: Design Quality Engineering.
• Role: Lead Engineer.
• Job Code: LEN-ENG-DQE.
• Job Band: 08.
• Direct/Indirect Indicator: Indirect.
• Job Overview.
• The Lead Engineer, Design Quality helps to supports the quality assurance efforts during the design and development phase of new products, ensuring compliance with industry standards, regulations, and customer requirements for the different projects in the Design and Engineering Services Group; from architecture to electronic circuit design and analysis, verification, validation and transfer into manufacturing.
• Detail Description.
• Provides engineering support and coordination around QMS. Understands Quality Management Systems for Design and Manufacturing.
• Support design reviews and design transfers providing inputs on quality and requirements.
• Guide and assist in developing Design Controls in compliance with 21 CFR 820, ISO 13485, ISO 9001.
• Develops and implements quality control procedures, work instructions, and inspection guidelines to enhance manufacturing and design processes.
• Provides engineering support and coordination for internal & external Design Audits.
• Helps to prepare submissions to FDA and CE Marking (EU MDR).
• Support the creation and updating of product risk management documents (Hazard analysis, DFMEA, RMP, RMR,) in accordance with ISO 14971.
• Collaborates extensively with cross-functional teams, including design, manufacturing, supply chain, and customers, to address and resolve quality issues throughout the product lifecycle.
• Able to manage a single line engineering project with limited number of participants and create project / change management plan, establish and distribute project roles, being able to communicate what is needed from the project participants in order to make the project successful.
• Demonstrate "Individual Leadership Behaviors" as per Leadership Imperatives.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Knowledge/Skills/Competencies.
• Expertise in root cause analysis, Failure Modes and Effect Analysis (FMEA), and 8D problem-solving methodologies.
• Familiarity with statistical process control (SPC) techniques and data analysis for quality improvement.
• Proficiency in the standards that need to be applied within the design and development process for the project under responsibility.
• Ability to develop and assess engineering processes.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• Typically 1-2 years of progressive experience in Design Quality Engineering, demonstrating a clear track record of successful project contributions.
• Typical.
• Education.
• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related technical field.
• Notes.
• This.
• is not intended to be an exhaustive list of all.
• of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Experience:

5 years required

Skills:

Electrical Engineering, Petrochemical, English, Thai

Job type:

Full-time

• Review electrical drawings, calculations, specifications, datasheets, schedules, vendor documents, and other technical submissions.
• Review, as applicable, HV/LV distribution, transformers, switchgear, MCCs, motors/drives, cables, earthing, lightning protection, electrical protection, emergency/standby power, and interfaces with other disciplines.
• Identify technical discrepancies, omissions, design risks, and potential non-compliances; issue clear comments and recommendations.
• Review responses and revised documents following comments and support closure of technical issues.
• Participate in technical clarification meetings when required.
• Bachelor's degree or higher in Electrical Engineering or a related discipline.
• Valid Professional Engineering License/Registration recognized by the Council of Engineers Thailand (COE Thailand).
• Relevant experience in electrical design, design review, engineering consultancy, EPC, project construction, or industrial projects.
• Good knowledge of applicable Thai and/or international electrical engineering standards and engineering practices.
• Ability to independently review technical documents and provide technically justified comments in English.
• Ability to provide support on relatively short notice when document review is required.
• Preferred Experience.
• Experience in project construction projects is preferred.
• Experience in mining projects will be considered an advantage.
• Experience in mineral processing, heavy industry, power generation, petrochemical facilities, EPC projects, engineering consultancy, or Owner's Engineer / Independent Engineer assignments will be beneficial.
• Working Arrangement.
• Freelance / On-call engagement with no guaranteed minimum working hours.
• Workload is intermittent and depends entirely on project document submissions and review priorities.
• Time is recorded and compensated based on actual hours worked.
• Most reviews may be performed remotely, with meetings or site attendance when required.
• Expected response times and review turnaround periods will be agreed upon for each assignment.
• Typical Deliverables.
• Reviewed drawings and technical documents.
• Technical comment sheets.
• Follow-up review reports for revised submissions.
• Technical clarification notes as required by the project team.

Experience:

6 years required

Skills:

Problem Solving, Teamwork, English

Job type:

Full-time

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Functional Area: Quality (QUA).
• Career Stream: Operations Quality (OPQ).
• Role: Technical Associate (TAS).
• Job Title: Technical Associate, Operations Quality.
• Job Code: TAS-QUA-OPQ.
• Job Level: Band 06.
• Direct/Indirect Indicator: Indirect.
• Summary.
• Provides support in the performance and daily activities of the department. Analyzes quality data and prepares reports for internal teams and external customers.
• Detailed Description.
• Ensures that the processes are carried out and comply with the specifications required by customers and that it complies with the local requirements of the organization and the requirements of MPS (Manufacturing Process Standards).
• Ensures that the specifications, the acceptance criteria of the products by the operational staff are known and respected; ensures that operators comply with product quality inspection procedures in accordance with customer requirements.
• Provides support in order to optimize processes, identifies and initiates opportunities to reduce costs.
• Prepares and collects data from the key points of the processes and prepares the internal quality reports.
• Monitors product yields, process (yield) and scrap rate (scrap) or other quality indicators.
• Participates in the activities of PFMEA analysis and elaboration of Control Plan.
• Assesses and updates working instructions for specific products.
• Knowledge/Skills/Competencies.
• PC operating knowledge - Ms Office.
• Knowledge of English - intermediate level.
• Knowledge and understanding of ISO9001, ISO13485, ISO19011, ISO14001, ISO 50001 and ISO 14971 management systems knowledge and understanding of quality and process improvements techniques and tools good analytical and problem solving skills ability to effectively communicate with a wide variety of internal and external customers teamwork skills.
• Physical Demands.
• Typical Experience.
• 4 to 6 years in a similar role or industry.
• Typical.
• Education.
• Bachelor's degree in a related field, or an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This.
• is not intended to be an exhaustive list of all.
• of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Experience:

3 years required

Skills:

Architecture, Web Services, Automation, Assurance

Job type:

Full-time

• All positions require a criminal background check.
• Digital & Technology.
• QA Engineer.
• 18 Jul 2026.
• Bangkok, Thailand.
• Kiatnakin Phatra Bank Public Company Limited.
• IT Quality Assurance is responsible for quality for all applications and services, including usability, functionality, and performance of the responsible domain.
• Role and Responsibilities /.
• Define approach and methodology for automation test and Gather and analyze automation test requirements.
• Participate in the review of product requirements and architecture design, analyze the effectiveness of requirements and design, identify relevant risks, and guarantee the testability of products.
• Estimate, prioritize, plan, and coordinate testing activities.
• Design, develop, execute and maintenance automation test scripts/test suites or automation test framework.
• Master at least one of the mainstream automated test tools, such as Appium, selenium, robot framework, etc.
• Bachelor/Master 's degree in computer science/computer engineer/information technology or related.
• Strong knowledge of automation testing process and automation testing life cycle.
• 3+ years of automation testing with Robot Framework and Appium.
• Experience in alternative automation test tools such as Unified Functional Testing (UFT), Katalon, Selenium Webdriver, Cypress, etc.
• Experience with automation testing of web applications, Api/web services, mobile testing.
• Specific knowledge and skill / ความรู้เฉพาะตำแหน่ง.

Experience:

6 years required

Skills:

Product Development, Recruitment

Job type:

Full-time

• Lead the team to handle all quality excursions independently, and take effective actions on time.
• Oversee the product & material quality from NPI to mass production.
• Develop the quality control plan for respective area (material/process/product).
• Monitor and report quality KPI for internal (factory) and external (customer).
• Drive continuous improvement to benefit customer, CLS and supplier.
• Develop and maintain internal quality system, procedures, work instructions and workmanship standards.
• Lead process/product/system/supplier audit and improvement actions follow up.
• Industry standards (e.g. ISO).
• Compliance audit.
• Safety audit etc.
• Follow up the EC(Engineering Change), SPCN(Supplier Process Change Notification) to ensure the implementation of changes is timely and accurate (initiated both externally and internally).
• Coach junior quality staff to improve their quality knowledge.
• Accomplish the jobs assignment from the superior and participate in the quality strategy deployment.
• Knowledge/Skills/Competencies.
• Strong knowledge of quality tools, ISO and IPC standards and processes.
• Knowledge of software and its uses in generating reports capturing data presenting data in an understandable format.
• Strong knowledge of product and manufacturing processes.
• Knowledge and understanding of the business unit and how decisions impact customer satisfaction product quality,on-time delivery and profitability of the unit.
• Knowledge of quality tools such as FMEA, PMP, SPC, 8D methodology, etc.
• Knowledge of Six sigma and Lean Kaizen.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require repetitive manual movements (e.g., keyboarding), carrying, pushing or pulling light objects, (under 5 kg.), carrying, pushing or pulling heavy objects (over 5 kg.), crouching, climbing.
• Sustained visual concentration on small areas, such as monitors, screens, precise eye/hand coordination, sustained visual concentration on numbers, legal documents.
• Typical Experience.
• 4 to 6 years in a similar role or industry.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experiency.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Experience:

5 years required

Skills:

Production planning, English

Job type:

Full-time

• We are seeking a Production Manager (Metal Stamping) to lead high-volume manufacturing operations, ensuring stable production, cost efficiency, and on-time delivery.
• This role is responsible for driving shopfloor performance, productivity improvement, and operational excellence, while leading teams in a fast-paced production environment.
• Lead daily metal stamping production operations to meet output and delivery targets.
• Ensure production aligns with planning, customer demand, and delivery schedules.
• Drive productivity improvement through manpower optimization and process efficiency.
• Control manufacturing costs, including labor utilization, scrap, and operational losses.
• Identify and resolve production bottlenecks to improve throughput and line efficiency.
• Ensure stable and consistent production processes and equipment utilization.
• Coordinate with Production Planning, Supply Chain, Engineering, and Quality teams.
• Ensure material availability and smooth production flow.
• Support new model introduction and production ramp-up activities.
• Lead and develop supervisors and shopfloor workforce, driving discipline and performance.
• Strengthen team capability in problem-solving and operational ownership.
• Drive continuous improvement initiatives (Lean, Kaizen, waste reduction).
• Standardize processes to sustain improvements and ensure operational consistency.
• Bachelor's degree in Engineering (Industrial / Mechanical preferred).
• 8-12 years of experience, with 3-5 years in leadership role.
• Experience in metal stamping or high-volume production.
• Strong leadership in shopfloor operations.
• Ability to guide and coach the team.
• Good analytical and problem-solving skills.
• Good command of English.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.

Experience:

2 years required

Skills:

Good Communication Skills, Teamwork, English, Thai

Job type:

Full-time

• Lead team performance and operational excellence: Drive team performance across Safety, Quality, Delivery, and Cost (SQDC) objectives, ensuring customer satisfaction and operational targets are consistently achieved.
• Develop and empower production teams: Lead, coach, and develop team members to strengthen capabilities, engagement, and accountability while fostering a culture of continuous improvement.
• Promote Michelin Manufacturing Way (MMW): Work closely with operators and support te ...
• Managing daily production activities to achieve safety, quality, delivery, and cost targets.
• Leading and developing operator teams through coaching, mentoring, and performance management.
• Monitoring production performance and implementing corrective actions when needed.
• Ensuring compliance with safety, quality, and operational standards.
• Promoting a culture of teamwork, accountability, and operational excellence.
• WHO WE ARE LOOKING FOR.
• Required.
• Bachelor's Degree in Engineering (Industrial, Mechanical, Electrical, Chemical, or related fields).
• 2-5 years of experience in manufacturing, production supervision, or engineering environments.
• Strong leadership and people management capabilities.
• Good communication and interpersonal skills.
• Ability to lead teams and drive operational performance in a manufacturing environment.
• Native Thai speaker with good communication skills in English.
• Preferred.
• Experience leading shopfloor teams in manufacturing environments.
• Knowledge of Lean Manufacturing, Continuous Improvement, or Operational Excellence methodologies.
• Fresh graduates with outstanding leadership experience and strong potential are also welcome to apply.

Experience:

5 years required

Skills:

Meet Deadlines

Job type:

Full-time

• Safety System Organization: Establishing safety protocols and standards for workplace safety practices.
• Safety Operation Plans for Each Site: Developing and implementing safety action plans for each site.
• Documentation and Form Design for Daily and Monthly Checks: Organizing documents and creating forms for daily and monthly safety inspections.
• New Employee Safety Training: Conducting safety training programs for new employees.
• Emergency Preparedness Planning, Hazard Prevention, and Emergency Drill Coordination: Developing emergency plans, preventing hazards, and conducting emergency drills.
• Risk Assessment: Conducting various Job Safety Analysis (JSA) checklists for risk assessment.
• Annual Health Checkup Schedule: Planning and organizing annual health checkups.
• Personal Protective Equipment (PPE) Wearing Schedule for Different Job Types: Creating schedules for wearing PPE based on job types.
• Incident Investigation and Analysis of Work-Related Injuries and Illnesses: Investigating and analyzing the causes of work-related incidents, injuries, and illnesses.
• Data Collection, Analysis, and Reporting on Incidents and Recommendations: Compiling statistics, analyzing data, and preparing reports with recommendations for incidents and illnesses.
• Appointment of Safety Committee and Monthly Meeting Reporting: Appointing a safety committee and conducting monthly meetings with corresponding monthly reports.
• Bachelor of Science Program in Occupational Health and Safety.
• Have 5 years experiences in project safety for Renewable energy.
• Pro-active and responsible, comfortable working autonomously as well as in a team environment.
• Hard working, ability to work independently, flexible and meet deadlines.
• Hard Skills: computers and office equipment, a variety of office software, such as email, scheduling, basic computer networking.
• Able to drive a car, hold a valid driver's license, and travel for work to other provinces.
• Willingness to travel on business trips to other provinces for approximately 5-15 days per month.

Experience:

5 years required

Skills:

Product Development, English, Thai

Job type:

Full-time

• We are seeking a.
• Lab Manager.
• to lead and oversee air conditioning testing and validation activities for new product development (NPD) programs.
• This role is responsible for ensuring testing accuracy, operational efficiency, and compliance with international standards, while providing strong leadership to drive lab performance and support timely product launches.
• Lead and manage day-to-day operations of the HVAC testing laboratory.
• Oversee testing of RES, IMS, LC, and VRF systems to ensure compliance with performance standards.
• Monitor and validate key parameters including temperature, pressure, airflow, refrigerant performance, and energy efficiency (COP/EER).
• Ensure all testing activities comply with company standards and international regulations.
• Supervise test setup, instrumentation calibration, and safety procedures.
• Ensure test equipment and benches are properly maintained and operational.
• Lead root cause analysis and corrective actions for performance deviations.
• Review product specifications, test procedures, and technical documentation.
• Prepare and review test reports for internal and external stakeholders.
• Collaborate with engineering, quality, and production teams to resolve issues.
• Support customer witness testing and validation activities.
• Ensure compliance with EHS (Environmental, Health & Safety) standards.
• Lead and develop team capability through training programs for engineers, technicians, and customers.
• Bachelor's degree in Mechanical, Electrical, or HVAC Engineering.
• 7-10+ years of experience in HVAC testing/laboratory environment.
• Minimum 3 years in supervisory or management role.
• Strong knowledge of air conditioning systems and testing methodologies.
• Experience with performance testing, instrumentation, and diagnostics.
• Ability to troubleshoot mechanical, electrical, and control system issues.
• Strong leadership and team management skills.
• Excellent coordination and stakeholder management capability.
• Ability to manage multiple projects in a fast-paced environment.
• Good command of English and Thai.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.