Filter Jobs

Experience:

2 years required

Skills:

Microsoft Office, Electronics, GMP, English

Job type:

Full-time

• Advanced Degree, no prior experience required, or Bachelor's Degree plus 2 years of hands-on technical experience installing, troubleshooting and repairing complex analytical instruments.
• Preferred Fields of Study: Electronics, Engineering, Physics, Chemistry, or related technical field.
• Additional relevant certifications are advantageous.
• Strong electronics and mechanical troubleshooting skills with ability to diagnose issues down to component level.
• Experience with ultra-high vacuum systems and high voltage equipment preferred.
• Excellent customer service and communication skills, both written and verbal.
• Strong organizational and time management capabilities.
• Proficiency with Microsoft Office suite and service management software.
• Ability to read and interpret technical documentation and schematics.
• Valid driver's license and ability to travel up to 50-75% within assigned territory.
• Physical ability to lift up to 50 lbs and work in various laboratory environments.
• Proficiency in English required; additional languages beneficial.
• Strong problem-solving abilities and capacity to work independently.
• Adherence to safety protocols and quality standards.
• Ability to respond to customer needs with short notice.
• Ability to effectively train and support customers on equipment operation.
• Experience documenting service activities and preparing detailed reports.
• Demonstrated success in meeting customer satisfaction goals.

Experience:

5 years required

Skills:

Mechanical Engineering, Business Development, Project Management, Market Analysis, Problem Solving, Negotiation, English

Job type:

Full-time

• Power the Future of Energy - Join Us as a Transformer Application Engineer.
• Are you ready to power the future? At Hitachi Energy, we're not just building transformers we're transforming the way the world uses energy.
• We're looking for a.
• Transformer Application Engineer.
• who's not just technically skilled, but passionate about driving the global energy transition.
• This is your opportunity to become a trusted advisor and technical leader in a role that blends engineering expertise with strategic impact.
• In this role, you'll be the go-to expert for our cutting-edge transformer solutions, helping customers across the region embrace decarbonization, digitalization, and smarter energy systems. You'll lead business development initiatives, influence market trends, and work closely with sales, R&D, and customers to deliver transformative solutions that matter.
• If you're looking for a role where your engineering expertise drives real-world change and where your voice matters in shaping the energy landscape this is your moment.
• How you'll make an impact (Maximum 8-10 bullets).
• Lead the regional Application Engineering & Business Development activities related to the transformer portfolio by understanding Market Trends and.
• secure the anticipated growth and have positive impact on ROMI.
• Fulfill the Customer facing dimensions, activities shall include organizing and conducting Customer Technical Trainings (CTT's), attending industry conferences, customer visits, reviewing transformer specifications and influence improvement recommendations, supporting customer engagements during tender negotiation / clarification, offer technical knowledge and support to customers on transformer applications and application solutions.
• Fulfill internal Hitachi Energy facing dimensions, activities shall include internal technical training (HIIT's) and presentations, support tender strategy & negotiation recommendations. Engage with factory and tender engineering teams to develop and deploy trust, acceptance and team integration, support customer engagements during factory visits / FAT and post order problem solving.
• Develop and implement KPI's and targets covering complete Transformer portfolio and provide visibility of activity and outcomes in the dimensions listed above. The metrics for her/his performance review might include the number of CTT's, HIIT's, specifications influenced.
• You will contribute to and follow a structured market plan combining the technical info gathered with customers while deploying a strategic overview mindset.
• You will provide customer feedback as well as strategic marketing inputs to Global and Regional Product Managers and support the market analysis, validation, competitive landscape and heat maps.
• Your background (Maximum 6-8 bullets).
• BE / BS degree (in Electrical or Mechanical Engineering) from an accredited university. A master's degree and / or accreditation or membership of industry technical bodies (CIGRE, IEC etc.) is a plus.
• Minimum 5 years of experience in the technical department (R&D, Engineering or Design) or Product Marketing, Sales and Business development or Project Management in the Transformer Businesses.
• You should have a deep understanding of the transformer portfolio for different segments and applications and will support from a technical knowledge point of view the Front-End Sales Team for the Marketing and Sales activities in the given Country/Region.
• The person in this role should have strong technical skills, in addition to the marketing experience, to be able to bridge the gap between technical and marketing teams in the company and exhibit excellent networking skills demonstrating "leading by influence".
• Intercultural sensitivity is required, with excellent communication skills in oral and written, with colleagues from multi-countries for assigned region.
• A strong grasp of the English and local language is a must.
• Be willing to travel ~ 50%.

Skills:

Industrial Engineering, Recruitment, Assembly, SAP, CAD, English, Thai

Job type:

Full-time

• Improve and monitor Safety in production line, include PPE. MC guard and Tool Equipment calibration.
• Annual revise ABRA, revised if change process and create a new ABRA in case implement new process/MC.
• Involve investigate team when we have an Incident, Accidents, property damage or any near miss in production.
• In charge to reviewed and revised Global standard, provide local WI and training to all Staffs.
• Involve investigate quality issues in production (RCA),find out root cause and setup proactive & preventive action for prevent repetitive problem.
• Support External and Customer audits.
• Improvement and promote to Safety, Quality and Productivity Kaizen.
• Annual Quality & Process training, skill record and Multi skill.
• Cost saving activity, improve rework and material cost. Create Hard & OPEX hard saving.
• Expedite CAPEX activity to meet as cost and delivery plan.
• Main in charge at Final process, specific at Cabling and packing process.
• Contact to SCM,Logistic, Engineer and other section to solving shop floor problem.
• Can rotation to other process as Supervisor assignment.
• Bachelor's degree of Electrical, Mechatronic, Industrial Engineering or in any field.
• 7 - 12 years' Experience in productions planning and shop-floor control and/or productions improvement and process improvement.
• Experience in Transformer Manufacturing will be advantage.
• Good command of Thai, English communication.
• Understanding of and ability to manage Engineering Order (EO) production processes.
• Computer skill in SAP-PP module will be advantage.
• Good Knowledge in computer engineering applications (PLC, Auto CAD).
• Reporting to Production Manager.
• We offer.
• 1 month of guaranteed bonus (Fix bonus) plus Performance Bonus. (Depending on employee's performance result and Business performance).
• 10 days annual leave (Service year 0-5), 15 days annual leave (Service year 6-10), flexible working policy, Flexibility working time.
• Benefit according to local standards: Heath-care insurance benefits to employees and their dependents, annual health checkup, Provident Funds (employees can contribute up to 15%).
• Growth possibility: Learning and development platform, career movement opportunity within organization.
• Possibility to gain experience in international environment.
• Accessibility and reasonable accommodation.
• Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a _general inquiry form_on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.
• This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.
• Use of Al and automated tools in recruitment.
• As part of our recruitment process, Hitachi Energy uses digital and automated tools, including Al-supported solutions, to assist with activities such as application screening, job matching, and interview scheduling. These tools are designed to support our recruiters and do not replace human decision-making. Candidate data is processed in accordance with applicable data protection and employment laws as well as _Hitachi 's Global Data Privacy Notice._.
• Background Screening and Security Checks.
• As part of the hiring process, Hitachi Energy conducts pre-employment background checks that may include verification of employment history, education, criminal records, and other relevant information, in accordance with applicable laws.
• For certain roles particularly those involving access to sensitive information, financial responsibilities, client data, regulated environments, or security-sensitive functions additional or more comprehensive background or security screenings may be required. These may include, but are not limited to, enhanced criminal history checks, credit history reviews (where legally permissible), sanctions screening, or other due diligence measures aligned with the responsibilities of the position.
• The scope and depth of any background or security review will be determined based on the nature of the role and business necessity, and will always be conducted in compliance with applicable federal, state, and local laws. Candidates will be notified and, where required, asked to provide consent prior to the initiation of any such checks.

Experience:

4 years required

Skills:

Automation, TypeScript, Python, Java, English

Job type:

Full-time

• Build evaluation suites for LLM and ML features: curated test sets, scoring against reference answers, LLM-as-judge where it is justified, and human review where it is not.
• Define what "good enough" means with the delivery team before launch, in numbers a client can accept, and hold releases to it.
• Test retrieval pipelines end to end, covering chunking and indexing, retrieval quality, grounding of the final answer, and behaviour when the right document is simply n ...
• Write regression tests that tolerate non-deterministic output, using semantic similarity, structured-output validation, tolerance bands, and repeated sampling rather than exact string matching.
• Cover failure modes that matter to clients: hallucination, prompt injection through user or document content, leakage of data across tenants or sessions, refusal and over-refusal, and degradation on Thai-language input.
• Track cost and latency alongside accuracy, so that a quality improvement that triples token spend is visible before it ships.
• Detect drift after release by comparing production samples against the baseline, and raise it early rather than after the client does.
• Design and maintain automated test suites for APIs, services, data pipelines, and web applications built for client projects.
• Run tests in CI, keep them fast and stable, and treat a flaky suite as a defect in its own right.
• Set the test strategy at the start of an engagement: what gets automated, what stays manual, what the exit criteria are, and what evidence the client will receive.
• About you.
• 4-5 years in test automation, QA engineering, or software engineering with substantial testing ownership.
• Strong programming ability in Python, or in TypeScript or Java with the willingness to work primarily in Python.
• Hands-on experience testing an LLM or ML-based product in production or close to it.
• Practical command of at least one automation framework such as Pytest, Playwright, Cypress, or RestAssured, and experience running suites in CI.
• Working knowledge of API and data testing, including SQL and validating data through a pipeline.
• The judgement to decide what deserves automation and what does not, and to say so when a suite is producing noise rather than signal.
• Clear written and spoken communication in Thai and English.

Skills:

Production Engineering, Chemical Engineering, Product Development, Problem Solving, HACCP, GMP, English

Job type:

Full-time

• Completing all Kimberly - Clark compliances such as EHS, QMS, Energy, GMP & HACCP etc.
• Using statistical methods and proper engineering tools for process control and monitoring.
• Driving operations team for real time problem solving to ensure all key KPIs align with targets or expectation.
• Leading continuous improvement and providing technical support for process (process capability, time & motion study) product, productivity (OEE) and manufacturing cost.
• Leading LEAN and technical capability improvement to operations team.
• Coordinating and providing technical support to concerned departments to support new product development, capital project, special run, BOM and others as requested.
• Driving all process document in the production lines are well defined and ensure proper training to operations team.
• _You will be maintaining equipment associated with the production, packaging and distribution of ARBEX products through preventative, predictive and corrective maintenance work. This role is part of ARBEX's investment in creating new jobs and expanding its capabilities to produce premium [Scott, Kleenex] that are essential to millions of lives around the world, and right here in [location]. We'll be Unstoppable Together._.
• Bachelor's Degree in Chemical Engineering, Production Engineering or any related fields.
• More than 3 years' experience in LEAN Manufacturing or Process Improvement fields.
• Has analytical skill, Decision Making and Problem-Solving Skills.
• Good command of English both spoken and written.
• Total Benefits.
• We believe that our employees are our greatest asset, and we're committed to providing them with the resources they need to be successful. If you're looking for a rewarding career with a company that cares about its employees, then ARBEX is the place for you.
• To Be Considered.
• Click the Apply button and complete the online application process. A member of our recruiting team will review your application and follow up if you seem like a great fit for this role.
• In the meantime, please check out the careers website.
• And finally, the fine print.
• For ARBEX to grow and prosper, we must be an inclusive organization that applies the diverse experiences and passions of its team members to brands that shape the future of tissue and hygiene, which is why we seek to build a workforce that encompasses the experiences of our consumers. When you bring your original thinking to ARBEX, you fuel the continued success of our enterprise. We are a committed equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, age, pregnancy, genetic information, citizenship status, or any other characteristic protected by law.
• The statements above are intended to describe the general nature and level of work performed by employees assigned to this classification. Statements are not intended to be construed as an exhaustive list of all duties, responsibilities and skills required for this position.
• _No Relocation:_.
• _This role is available for local candidates already authorized to work in the role's country only. ARBEX will not provide relocation support for this role._.
• _#LI-Onsite_.
• Primary Location.
• Samut Prakarn - South Mill.
• Additional Locations.
• Worker Type.
• Employee.
• Worker Sub-Type.
• Regular.
• Time Type.
• Full time.

Experience:

2 years required

Skills:

Industrial Engineering, Statistical Analysis, Quality Assurance, Meet Deadlines, Data Analysis

Job type:

Full-time

• Develop and update service and product quality standards in alignment with customer requirements and factory capabilities, focusing on Tier 1 global customers.
• Conduct regular reviews of quality control procedures to ensure compliance with both company and customer expectations.
• Perform root cause analysis (RCA) for quality issues occurring post-sale or during service.
• Collaborate with production and QA teams to implement corrective actions and prevent recurrence of issues.
• Manage the RMA process, ensuring timely and efficient handling of returns in accordance with customer and company guidelines, and monitor rework orders to meet deadlines.
• Analyze RMA data to identify trends and develop strategies for reducing future returns.
• Maintain strong customer relationships by addressing quality concerns promptly and ensuring that RMA processes, customer complaints, and 8D reports lead to satisfactory resolutions.
• Monitor service quality KPIs (e.g., RMA rate, complaint resolution time, customer satisfaction) to drive continuous improvement.
• Implement improvement initiatives based on feedback to exceed customer expectations for product and service quality.
• Support documentation, process audits, and system audits for customer audits and third-party certifications.
• MQA - Manufacturing Quality Assurance Engineer / Senior Engineer.
• Identify and resolve quality issues within manufacturing processes, including conducting root cause analysis and implementing corrective actions to prevent recurrence.
• Collaborate with cross-functional teams to design and implement process improvements that enhance efficiency and product quality.
• Communicate quality findings and recommendations clearly to stakeholders, including management and engineering teams.
• Develop and maintain quality control plans, inspection protocols, and ensure timely updates to quality documentation.
• Lead initiatives and projects aimed at reducing defects, improving operational efficiency, and elevating overall product quality.
• Perform risk assessments related to quality processes and improvement projects.
• Work closely with production, engineering, and QA teams to ensure a unified and consistent approach to quality enhancement.
• Utilize data analysis tools to monitor, evaluate, and report on key quality performance indicators.
• Prepare and present comprehensive reports on project progress, outcomes, and recommendations for continuous improvement.
• Own line qualification, product transfer, and process audit activities, ensuring compliance and successful implementation.
• NPE Quality Engineer / Senior Engineer.
• Evaluation of development phase transfer based on new product evaluation control.
• Assist in the education, training and guidance of new engineers.
• Identifying and resolving quality issues related to manufacturing processes, including root cause analysis and corrective action to prevent failures.
• Review FMEA(Failure mode and effects analysis),DFx, MFx.
• Development and implement Statistical Process Control.
• Apply statistical analysis to control process capability and accuracy.
• Develop and implement quality control plans, inspection protocols and update quality documentation.
• Communicating quality findings and recommendations to stakeholders, including management and engineering teams.
• Collaborate with cross-functional teams, including production, engineering, and quality assurance, to ensure a unified approach to quality improvement.
• Utilize data analysis tools to monitor and report on key performance indicators related to quality.
• Prepare and present reports on project progress, outcomes, and recommendations for improvement.
• Solve quality issue by 8D report.
• Line qualification, product transfer and process audit owner.
• Sustain product change notice management and leading.
• Audit of process operation standards.
• Who are we looking for?.
• Bachelor's Degree or higher in Electrical/ Electronics / Mechanical / Mechatronics / Industrial Engineering or other related engineering field.
• At least 3-5 years of experience in Electronics or Manufacturing Industry.
• Familiar with electronic and/or automotive product manufacturing processes.
• Work under pressure and cooperate with the team.
• Good command of both spoken and written English.
• Chinese proficiency is an advantage.
• Troubleshooting and Good Problem-Solving Skills.
• Strong data analysis (with programming capability is a plus).
• Familiar with automotive standards such as IATF/VDA6.3.
• Hands-on experience in working in an automotive environment and strong knowledge in IATF/VDA 6.3, 5 Core tools (APQP,PPAP,FMEA,MSA,SPC).
• Good communication/collaboration.
• IATF/VDA6.3 certificate will be a plus.
• Experience in Quality core tools (FTA, Fishbone, Why-Why analysis).
• 8D report, QC 7 tool, GR&R and Root cause analysis skill.
• Basic knowledge MSA (Calibration, GR&R).
• Basic knowledge Process capability analysis (CPK).
• Basic knowledge for ISO 9000.
• Good Interpersonal Skills with highly innovative and Creative Ideas, Self-managing, Strong Time Management, and Problem-solving Skills.
• Enthusiastic and active person with the ability to Work Under Pressure.
• Desire to work as a strong team player.
• Top reasons for joining us?.
• Opportunity to join a diverse and international company where can help create a greener more intelligence-driven future.
• A number of programs each year to support you in your career journey and our program offering continues to grow annually.
• Balance life as we have 5-day work week policy.
• We offer comprehensive medical insurance coverage for you and your family.
• Yearly bonus and quarterly incentive to reward your achievements.
• We provide a free bus and van shuttle service to many locations around the company.
• For more details about Delta Electronics, please visit www.deltathailand.com.
• Like and follow our career page on Facebook: Delta Careers Thailand (www.facebook.com/deltaelectronicscareers).

Skills:

DevOps, Cloud Computing, Amazon AWS

Job type:

Full-time

• Support CI/CD pipeline operations and deployment activities using tools such as GitLab CI/CD and Jenkins.
• Assist in managing cloud infrastructure and containerized environments (e.g., AWS, Kubernetes).
• Monitor system performance and troubleshoot basic issues.
• Perform routine maintenance, patching, and system checks.
• Support incident handling and escalate when necessary.
• Provide basic IT support, including laptop setup.
• Maintain documentation for systems and processes.
• Basic knowledge of Linux and command-line usage.
• Understanding of networking fundamentals (DNS, HTTP, TCP/IP).
• Familiarity with cloud platforms (AWS, Azure, or GCP) is a plus.
• Exposure to Docker, Kubernetes, GitLab CI/CD, or Jenkins is an advantage.
• Strong willingness to learn, with guidance and mentorship provided by experienced senior engineers.
• Ability to work effectively under pressure and manage multiple tasks in a dynamic environment.

Experience:

5 years required

Skills:

Automation

Job type:

Full-time

• Coordinate local FM/FE teams to develop, conduct spot checks and continuously maintain CMDB topology diagrams.
• Organize local teams to carry out investigation, access, governance and optimization of EMS measurement points.
• Lead local FM/FE teams to implement alarm convergence, EOP linkage, as well as formulate and drill emergency response execution strategies.
• Conduct evaluation on technical optimization for automation control discipline, and develop standardized solutions for recurring issues.
• Take charge of special risk inspection, change review, operation & maintenance technical optimization assessment, maintenance review and global on-site audit for automation control.
• Drive the implementation of key automation control technologies in global data centers to guarantee stable operation of equipment automation systems.
• Supervise on-site change activities performed by vendors, and be responsible for system deployment, commissioning, operation, optimization and strategy configuration.
• Bachelor's degree or above, majoring in Mechanical Engineering, Electrical Engineering, Automation, HVAC, Computer Science or related disciplines.
• Minimum 3-5 years of working experience, including at least 3 years in data center operation or maintenance management or quality engineering.
• Familiar with the architecture and operation logic of automation control systems, and aware of logic optimization approaches.
• Proficient in BMS/EPMS systems and infrastructure equipment; familiar with mainstream communication protocols including Modbus, BACnet, SNMP, MQTT, etc.
• Capable of system deployment, commissioning, operation, optimization and strategy configuration. Coding/scripting skills (Python/Shell, etc.) are preferred.
• Possess bilingual communication capabilities in Chinese and English; able to conduct independent on-site technical communication overseas and compose English technical documents. English should at least be Fluent.
• Demonstrate cross-departmental, cross-team and cross-cultural collaboration skills, with strong execution and sense of responsibility.
• Work closely with local FM/FE teams to facilitate the construction and implementation of IDC control systems from monitoring to automatic control.
• KPI Indicators.
• Completion rate of topology drawing, inventory accuracy rate, timeliness rate of equipment change synchronization.
• Coverage rate of verification rules, CMDB inventory accuracy rate, qualification rate of EMS measurement point access quality.
• Completion rate of measurement point access, alarm activation rate, alarm health level (convergence rate, false alarm rate).
• Implementation rate of automation control technical optimization solutions, closure rate of risk inspections, rectification rate of findings from global audits.
• Coverage rate of alarm convergence strategies, completion rate of emergency plan drills, compliance rate of EOP linkage execution.
• Completion rate of regional implementation plans, coverage rate of standard documents (topology specifications, measurement point access specifications, etc.).
• Compliance rate of vendor change operations, resolution efficiency of Colo technical issues.
• Completion rate of training materials, skill certification pass rate of local teams.

Experience:

5 years required

Skills:

Microsoft Office, System Testing, Windows Server, VMware, English

Job type:

Full-time

• Study and understand.
• the Scope of Work and Solution Design for assigned projects.
• Review and validate.
• proposed solutions prior to project kickoff.
• Inspect and verify.
• hardware equipment, software licenses, and required project data before starting the project.
• Attend and participate in.
• project kick-off meetings with the Presales and Project teams.
• Install and configure.
• Cisco Unified Communications Manager (CUCM).
• Cisco Unity Connection.
• Cisco IM & Presence.
• Cisco CUBE / Voice Gateway.
• Cisco IP Phone.
• Webex Calling.
• Assist in system migration.
• by planning migration and cutover procedures to minimize downtime.
• Execute system testing.
• against test cases and support User Acceptance Testing (UAT).
• Prepare technical documentation., including Configuration Guides, Test Results, and As-Built documents.
• Provide post-installation support.
• both remotely and on-site, with the ability to analyze SIP Call Flows and Voice Signaling.
• Study emerging technologies.
• and obtain professional certifications in line with the personnel development plan.
• Bachelor's degree in Computer Science, IT, or a related field.
• Minimum 2-3 years of relevant experience.
• Fundamental knowledge of Computer Networking (Routing, Switching, WAN, LAN, Security, and Wireless).
• Hands-on experience configuring Cisco equipment (e.g., Cisco CUCM, Cisco VGW).
• Fair to intermediate English communication skills (reading, writing, and speaking).
• Basic knowledge of Microsoft Office (Word, Excel) and Microsoft OS (Windows, Windows Server).
• Basic knowledge of VMware ESXi.
• Proficiency in Microsoft Visio and Microsoft Project.
• Fundamental understanding of basic programming.
• Strong service mind with a thorough understanding of customer service principles.
• Ability to work outside of standard business hours (overtime/shift work).
• Valid driver's license and ability to drive a car.

Experience:

5 years required

Skills:

Mechanical Engineering, Negotiation, English

Job type:

Full-time

Execute sales and marketing strategies for HVAC products including VRF and Chiller systems. Deliver technical presentations and recommendations to clients. Develop new customer bases while maintaining existing relationships across government and private sectors. Coordinate internally and externally with relevant departments. Prepare quotations, technical documentation, and support bidding processes. Track sales progress and provide technical customer support through deal closure. Generate monthly, quarterly, and annual sales reports. Requirements: Bachelor's degree in mechanical en ...

Experience:

5 years required

Skills:

Quality Assurance, Safety Management, Assurance

Job type:

Full-time

• Be able to work in Suvarnabhumi Airport (BKK).
• Provide support to Quality Assurance Manager in regard to the auditing function of technical quality assurance, provide standards, processes and services to the airline.
• Audit and report about TVJ aircraft that are maintained that approved by CAAT, Manufacturer, or Vendors.
• Ensure that certifying staff approval/authorization system is implemented and maintained for the control of staff approval/authorization worldwide.
• Ensure that adequate records are kept for all works undertaken, for the required time scales, and in suitable conditions.
• Perform audits and reports of AOC system and contracted (if any) organization's procedures, contracted aircraft maintenance or contracted services ensuring that contracted services are in compliance with signed contracts enabling to TVJ operate in accordance with approved documents and standards.
• To monitor, supervise mandatory requests and changes of aircraft maintenance process.
• Control aircraft documents, forms, procedure, Certificate of Authorization/Approval and stamps issued by TVJ.
• Carry out the quality audit of the line station maintenance and production audit.
• Implement of the quality assurance audit plan and performing the quality reports.
• Certificate of Authorization/Approval to submit Director SSQA or his authorized person to approval.
• Maintain appropriate technical records for SSQA Department.
• Apply the aircraft delivery & acceptance process such as aircraft registration, Certificate of Airworthiness and Certificate of Registration to CAAT when new aircraft into Thai VietJet Air fleet.
• Other assignments from the direct Manager.
• NEW GRADUATES ARE WELCOME TO APPLY.
• Bachelor's degree in Aeronautical technical or any related field.
• No experience required.
• Qualifications in Engineering/ Maintenance fields.
• Proven background knowledge engineering and maintenance, safety management, Quality assurance and human factors; and Quality Auditor Qualification.

Experience:

1 year required

Skills:

Construction Monitoring, English

Job type:

Full-time

• Manage sourcing process, including RFQ, supplier selection, and commercial comparison
• Evaluate supplier quotations and recommend cost-effective procurement solutions
• Negotiate pricing, terms, and delivery schedules with suppliers
• Coordinate with Engineering, Project, and Site teams to ensure alignment of technical and commercial requirements
• Issue and manage Purchase Orders
• Monitor procurement schedules and ensure timely delivery of materials and equipment
• Resolve procurement-related issues, including delays, quality concerns, and discrepancies
• Support cost control initiatives and value engineering opportunities.
• Bachelor s degree in Electrical Engineering, or related field
• Minimum 1-3 years of experience in procurement or purchasing (construction / ME preferred)
• Basic understanding of procurement processes and supplier coordination
• Proficient in Microsoft Office (Excel, Word)
• Good communication skills in Thai and basic English.
• Benefit.
• Transportation Expense (actual expenses)
• Health Insurance (MSIG cashless)
• Car & Gasoline (on site work)
• Provident Fund
• Annual BONUS
• OT
• Paid Vacation (6 days per year)
• Employee trip (once per year)
• New year party,
• Overseas Business Trip Allowance
• Domestic Business Trip Allowance (if it can't go home in day)
• Language allowance (N3)
• Others.
• Working Hour.
• 08:00 - 17:00.
• Holiday.
• Sat, Sun
• Public holidays
• Working on Sat (2 times per month).
• Annual BONUS (about 2 months/year)
• Provident Fund (3%)
• Overseas Business Trip Allowance (750 THB 1,000 per day)
• Domestic Business Trip Allowance (240 THB per day) if it can't go home in day.
• Language allowance (N3): 3,000THB/month..

Skills:

Instrument

Job type:

Full-time

• Analyze plant processes and develop control strategies to optimize performance and safety.
• Review design for selection and specify instrumentation sensors, actuators, and control equipment.
• Review design and configure Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC).
• Review design and develop human-machine interfaces (HMI) for plant operation and monitoring.
• Review instrument loop calculations and sizing for optimal system performance and assist Piping and instrument diagrams (P&ID).
• Review design and development of I&C engineering deliverables, control systems, shutdown PLC hardware and software design.
• Review datasheet / calculation for control valves, safety relieve valves, flow elements, restriction orifice; thermowell wake frequency and selection of the suitable valve, etc.
• Participate in Factory acceptance test and site acceptance test.
• Review and assist major Control System vendors from technical bidding stage until installation and commissioning completion.
• Review project bidding package, technical bid evaluation, Bill of Quantity, etc.

Experience:

3 years required

Skills:

Automation, English

Job type:

Full-time

• Maintaining the interactions with the active customers and identifying new client account as well as new business possibilities
• Selling the products and services to active customers of the company and convincing them about their usability and advantages
• Making the customers understand about the various products and services by explaining to them about the same in their local language
• Ensuring that the requirements of the international clients are met by modifying the products and services of our company to provide
• Treating and greeting the customers very well and making them go through the purchasing methods and procedures
• Attending international sales meetings, seminars and conferences arranged within the company or between the company and the customers to boost the sales profits
• Managing the inquiries and questions from the customers and clearing all their doubts on the products and services
• Convincing the customers to buy the machines or related products and services of the company
• Searching for opportunities that enhance the sales and benefit to the clients
• Administering the sales area that were allocated and planning effectively to manage time and generate profits by maintaining the sales
• Submitting the reports, records, presentations and sales documents to the Managing Director
• Maintaining the daily, weekly, quarterly, half yearly and annual sales reports and records
• Upholding the bills, financial statements and records of expenditures of the international travels occurred
• Undertaking any new relevant tasks as maybe directed by Managing Director from time to time.
• Bachelor's Degree in Mechanical, Electrical, or Industrial Engineering or equivalent is preferred
• At least 3 years of industry segment experience is preferred (Bakery / Fast-Moving Consumer Goods)
• English communication required, fair to good level of writing and speaking is acceptable
• Computer literacy, having basic skills of Microsoft Office, proficient in AutoCAD is advantage
• Own Vehicle with activated driving license & good driving skill
• Customer service orientated
• Self-managed but able to prioritize the work to fit with our company s results-oriented culture
• Good personality and outgoing with strong interpersonal and communication skills
• Analytical ability to effectively identify and resolve problems independently
• Ability to work independently and set own schedule
• Flexible to work extra hours and able to travel aboard and upcountry
• Working experience in foods industrial environment would be benefit, knowledge base in automation background is preferrable..
• Benefit.
• Basic Salary depends on educational background and work experience (Negotiable)
• Car Allowance
• Mobile Phone Allowance
• Sales Commission from new sales project (Individual Performance)
• Group Life Insurance cover for Death and Accidental including to IPD cases
• Medical Expenses claimed with company for OPD case
• Provident Fund
• Annual leave 10 days/year
• Annual Health Check-up
• Company s gathering party and outing trip (on occasion).
• Working Hour.
• 08:30 - 17:00.
• Holiday.
• Working Days: Mon-Sat (switching 2 days working on Saturday in each month).
• บริษัทต้องการคนที่เคยขายเครื่องจักรอุตสาหกรรมทำอาหารประเภทไหนก็ได้ เช่น bakery หรือ FMCG แต่ต้องเป็นรูปแบบเครื่องจักรทำอาหารเท่านั้น**
• หากไม่ได้เรียนจบสายวิศวะแต่เคยขายเครื่องจักรทำอาหารมาโดยตรง สามารถรับพิจารณาได้เช่นกัน**
• ไม่รับพิจารณาผู้สมัครที่เปลี่ยนงานบ่อยหรือเป็น job hopper (อย่างต่ำต้องทำ 3 ปีขึ้นไป)**
• ตำแหน่งนี้จะต้องพาลูกค้าไปเยี่ยมชมเครื่องจักรทำอาหารที่ นครปฐม ค่อนข้างบ่อย**
• (เงินเดือนผู้สมัครขึ้นอยู่กับประสบการณ์ของผู้สมัคร)
• Noted: รบกวนอ่านทุกครั้งก่อน apply
• หากเป็นผู้สมัครที่มีประสบการณ์ตรงมาก่อน 1-2 ปี เงินเดือนจะต้องเริ่มต้นที่ 25k - 30k
• หากผู้สมัครมีประสบการณ์ตรงในสายนี้ 3-5 ปีขึ้นไป จบตรงในสายนี้มาก่อน เงินเดือนจะขึ้นอยู่กับประสบการณ์ที่ผ่านมา 40k - 55k (แต่ถ้ามีประสบการณ์มาก่อน แต่ไม่ตรงสาย จะยังไม่รับพิจารณา).

Experience:

No experience required

Skills:

English

Job type:

Full-time

• Our business
• Engineering services for renewable energy projects, primarily solar power generation systems
• Consulting services within the same field
• Hiring reason
• We are seeking new members in preparation for a large-scale project scheduled for 2025.
• Planning and coordinating projects
• Business trips with a Avg 3-4 months project every 2-5 months.
• Managing workers on site
• Overall project management, including design, material procurement, and schedule management
• Collaboration with clients and other technical teams
• Other necessary tasks.
• Must
• Must submit Transcript and English CV before application
• Male, Thai national, Age22~25
• New grad only
• Bachelor Degree in Electrical Power Engineer/Electrical Engineering fields
• Have driver license * Car provided
• Can work on Saturday *If customer request(Company provide OT Fee or can take leave on weekday)
• Conversational English level
• Advantage
• Active person
• Ability to use Auto-CAD
• Able to travel to up-country.
• Benefit.
• Living Allowance
• Travel Allowance *Basically full paid
• Gasoline allowance *Only if you commute to the job site by private vehicle
• O.T. Allowance
• Provident fund
• Medical Allowance
• Social Security Fund
• Bonus
• Salary adjustment (Once/year).
• Working Hour.
• 08:30 - 17:30.
• Holiday.
• Saturday
• Sunday
• Public holidays
• Work on Saturday (Frequency depends on the situation).

Skills:

Electronics, Automation

Job type:

Full-time

The company, founded in 1988, is one of the leading producers in the world for power and thermal management solutions. Delta is also a major regional player in several product segments including industrial automation, displays, and networking. As an energy-saving solutions provider with core competencies in power electronics and innovative research and development, Delta's business categories include Power Electronics, Automation, and Infrastructure.

Skills:

Recruitment

Job type:

Full-time

• Support AOI-Packing Machine, tooling, and automation (robot).
• Diagnose and resolve technical issues on semiconductor equipment and computer systems/software.
• Implement continual improvement programs, parts overhauls, preventive maintenance, modifications, and repair work on equipment.
• Evaluate and release new machines.
• Coordinate logistics arrangements and collaborate with suppliers on equipment-related matters.
• Monitor machine performance, generate regular update reports, and track OEE, efficiency, cost, and quality control.
• Bachelor's or Master's degree in mechanical, Electronic, Automation Engineering or a related field.
• 0-2 years' experience in Semiconductor/electronics industry or related fields.
• Good communication in Thai and English and Strong communication and interpersonal skills.
• Willingness to work in a cleanroom environment.
• Highly motivated individual capable of working independently.
• Availability to work or be on standby during after-office hours, weekends, and public holidays for critical issue.
• Ability to work under high pressure.
• Computer literacy in MS Office, Excel, Power point, Power BI, etc.
• Understand automation (robotic) and programming. (advantage).
• More information about NXP in Thailand.
• LI-6a60.

Skills:

Mechanical Engineering, Leadership Skill, Automation, Assembly, CAD, English

Job type:

Full-time

• Perform site check and risk assessment.
• Lead the site planning (M & E) in liaison with sub-contractors, clients and in-house technical teams.
• Prepare for site installation including manpower planning, tool list, packing plan and safety briefing.
• Oversee the onsite progression as per planned schedule, drawings and specifications.
• Provide technical advice to resolve and impromptu technical risk/non-conformance factors.
• Prepare the report in comply with the project standard.
• Monitor the onsite quality control and safety compliance.
• Perform and standby system optimization.
• Bachelor Degree of Mechanical Engineering or related field in Material Handling System.
• Requires knowledge in Auto CAD & Conveyor Automation System.
• Minimum of 2 years' experience in Installation or Maintenance work in Material Handling System.
• Have experience in the relevant capacity, exposure in industrial automation or conveyor system or assembly industries would be a great plus.
• Strong troubleshooting skill, good interpersonal and leadership skill.
• Dynamic, initiative, positive thinking and self-motivated personality.
• Highly disciplined, adaptive and open to hands-on involvement as and when is required.
• Contributes to Team efforts by accomplishing related results as needed.
• Good command of spoken and written English will be an advantage.
• On-time salary.
• Project site travel allowance.
• Monthly transport allowance.
• Monthly mobile phone allowance.
• Overtime claim followed to salary range.
• Bonus depends on company performance.
• Social security fund.
• PA insurance.

Experience:

3 years required

Skills:

Architecture, Automation, Big Data, Power BI, Python, Oracle, Hadoop, Apache, SQL, ETL

Job type:

Full-time

• Design, develop, and maintain robust data pipelines using Apache Airflow, SSIS, PySpark, and Talend to ingest, transform, and load large-scale datasets (300M+ rows) from multiple sources.
• Manage and optimize relational databases including Oracle and SQL Server, ensuring high performance and scalability for analytical workloads.
• Design, build, and maintain cloud data platforms and warehousing solutions using AWS services such as Redshift and S3, alongside ClickHouse for high-performance analyti ...
• Develop and maintain OLAP solutions using SSAS for advanced reporting and analytics, including cube design, partitioning, and aggregation strategies.
• Implement ETL processes for structured and semi-structured data using tools such as Talend and PySpark, ensuring data quality, consistency, and compliance with industry standards.
• Collaborate with BI team, Actuarial Team and business stakeholders to understand requirements and deliver efficient data models and solutions.
• Monitor and improve data pipeline performance, troubleshoot bottlenecks, and implement best practices for parallel processing and resource optimization.
• Ensure data security and compliance with insurance industry regulations and company policies.
• Leverage big data technologies such as Apache Spark for distributed processing and advanced data transformations.
• Automate workflows and scheduling using Airflow DAGs, ensuring reliability and scalability of data operations.
• Document data architecture, processes, and standards, and provide technical guidance to team members.
• Bachelor's degree in Computer Science, Computer Engineering, Information Technology, or a related field.
• 3+ years of experience building and maintaining data pipelines.
• Proficiency in SQL and experience with relational databases (Oracle, SQL Server) including performance tuning and query optimization.
• Hands-on experience with ETL tools such as SSIS, Talend, and PySpark, and data modeling for OLAP solutions using SSAS.
• Knowledge of data pipeline orchestration using Apache Airflow.
• Experience with big data processing frameworks such as Apache Spark for distributed data transformations.
• Hands-on experience with cloud database/data platform services such as AWS Redshift, S3, and ClickHouse.
• Solid understanding of data warehousing concepts, star/snowflake schema, and partitioning strategies for large datasets (300M+ rows).
• Familiarity with insurance industry data or other regulated environments (preferred).
• Proficiency in Python or another scripting language for automation and data manipulation.
• Knowledge of data quality, governance, and security best practices.
• Ability to work with large-scale data and optimize workflows for performance and scalability.
• Preferred Qualifications.
• Experience with Power BI and building efficient data marts.
• Experience with data privacy, governance, and secure data access practices.
• Hands-on with cloud platforms or tools such as AWS (Redshift, S3), ClickHouse, Azure, Databricks, Delta Lake, Snowflake, or Hadoop ecosystem.
• Able to troubleshoot performance issues in both backend pipelines and frontend analytics tools.
• Comfortable working in a fast-paced, high-ownership environment with cross-functional teams.

Skills:

Cloud Computing, Web Services

Job type:

Full-time

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, su ...