เงื่อนไขการค้นหา

ทักษะ:

Compliance, Procurement

ประเภทงาน:

งานประจำ

• Supervise marine civil works to ensure compliance with EPC requirements, safety, quality, and schedule.
• Review engineering drawings, specifications, method statements, and technical documents for constructability.
• Coordinate with engineering, procurement, construction, and contractors to resolve technical issues.
• Monitor marine construction activities, including piling, jetties, wharves, dredging, and marine foundations.
• Ensure contractors perform works according to approved designs, standards, and project timelines.
• Bachelor's degree or higher in Civil Engineering.
• Minimum 5 years' experience in civil inspection or related fields.
• Experience in construction work would be advantage.
• Experience in the Civil or Marine infrastructure project would be an advantage.
• Engineering license is required.
• Strong understanding of quality control standards and testing techniques.
• Good command in English (Minimum 750 TOEIC score).
• Ability to travel/ work upcountry and abroad.
• Workplace is in Rayong.
• Goal-Oriented, Unity, Learning, Flexible..

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Location: RD Center, Samutprakarn.
• Department: R&D - ICTBG/TISBU.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Ener.

ทักษะ:

Electronics

ประเภทงาน:

งานประจำ

• Expatriates are welcome but have to had experiences related to the requirements (At least 7+years of experience).
• Opportunity to work in international environment.
• Career growth opportunity.
• Good command of spoken and written English.
• Perform circuit analysis, stability analysis, circuit simulation, component selection including technical documentation.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with mechanical engineer, FW engineer to ensure design success until reliably manufacturing.
• Bachelor Degree in Electrical Engineering with good circuit analysis skill or Master's Degree in power electronics industry.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• To support all mechanical related activities, including mechanical design, mechanical design verification tests, reliability engineering test support,design review meeting,customer conference call, factory DFM review and factory build support.
• To conduct design check report, tolerance analysis report, thermal simulation report, design document for customer approval, bill of material for factory build, part design drawing, assembly drawing.
• To provide support to team in platform development.
• To follow up customer / factory request of changes or solution for improving production model.
• Bachelor Degree or above in Mechanical Engineering or related.
• Fresh graduated or 1-2 year related working experience.
• Knowledge in metal / plastic parts design for power supply / tooling / manufacturing will be in advantage.
• Proficiency in Creo Parametric / Simulate / Flotherm Simulation.
• Hard working and willing to put extra effort to complete the tasks on time.
• Able to work independently and under pressure.
• Initiative to learn.
• Good command of spoken and written English.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.
• Terms of Use.
• Privacy Policy.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Perform magnetics design calculation and power loss analysis such as PFC choke, Transformer, Resonant inductor, EMI filter.
• Perform magnetics simulation in Finite Element Analysis Software such as FEMM, Ansys, Quickfield.
• Perform magnetics design for manufacturing.
• Coordinate with other R&D centers in different countries.
• Master's Degree in power electronics or machine design or experienced from related industry or PhD degree.
• Ability to troubleshoot and analyze technical problems in details.
• Able to use some simulation software, MathCAD or writing some script languages.
• Verbal and written communications skills.
• Professional working attitude, high responsibility and good teamwork.
• Strong background on magnetics design.
• Background on power electronics.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.
• Terms of Use.
• Privacy Policy.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Expatriates are welcome but have to had experiences related to the requirements (At least 5+years of experience).
• Opportunity to work in international environment.
• Career growth opportunity.
• Good command of spoken and written English.
• Perform circuit analysis, stability analysis, circuit simulation, component selection including technical documentation.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with mechanical engineer, FW engineer to ensure design success until reliably manufacturing.
• Bachelor Degree in Electrical Engineering with good circuit analysis skill or Master's Degree in power electronics industry.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Bachelor's degree or above in Electronic Engineering, Electrical Engineering, Mechanical Engineering.
• Initiative, high responsibility and good teamwork.
• Professional working attitude, high responsibility and good teamwork, Eager to learn new things & technology: most important.
• Interest in R&D work and eager to be part of team to develop green technology for better world.
• Cooperate with Colleagues in Thailand factory and RD center in China.
• Utilize FMEA (DFMEA/PFMEA) to identify design and process defects and drive design optimization.
• Acquire structured logical analysis tools such as 5Why, Fishbone diagram, Is/Is Not (separation analysis), etc.
• Be capable of independently leading the 8D problem-solving process and promoting the thorough improvement of issues during the R&D and trial production stages.
• Have DOE (experimental design) awareness to verify key parameters and be able to conduct data analysis using SPC (statistical process control).Verbal and written communications skills in English, knowing Chinese is a plus.
• Able to travel oversees China.
• I. Quality Assurance during Design Phase.
• Participate in the design review of power modules to ensure that the design meets quality and reliability requirements.
• Promote design risk assessment (such as DFMEA), assist in identifying potential failure modes and formulating preventive measures.
• Review design output documents (such as specifications, BOM, drawings) to ensure clear quality requirements.
• II. New Product Introduction (NPI) Quality Management.
• Support quality monitoring and problem tracking during sample trial production and engineering verification (EVT/DVT/PVT) stages.
• Assist in developing process quality control points (such as Control Plan, SOP, QC tools).
• Promote quality risk assessment and improvement before mass production (such as yield analysis, DOE, process capability analysis).
• III. Handling and Improving Quality Issues.
• Lead the analysis and handling of quality issues during the R&D stage (such as test failures, customer complaints).
• Use quality tools (8D, 5 Whys, Ishikawa) for root cause analysis and drive improvements.
• Follow up on the implementation and effectiveness verification of improvement measures to prevent the recurrence of problems.
• IV. Quality Data Management and Reporting.
• Establish and maintain quality data (such as yield, failure rate, test pass rate), conduct trend analysis.
• Regularly produce quality reports to support R&D decisions and management review.
• Assist in establishing quality KPIs to drive the quality awareness and goal achievement of the R&D team.
• V. Quality System and Compliance Support.
• Ensure that the R&D process complies with quality management systems and safety regulations such as ISO, IATF, IEC.
• Support internal audits and customer audits, prepare relevant quality documents and technical explanations.
• Promote standardization of quality processes and continuous improvement (such as document management, process optimization).
• VI. Supplier Quality Collaboration.
• Participate in supplier selection and technical evaluation to ensure that their quality capabilities meet the requirements of power modules.
• Assist suppliers in introducing quality standards and monitor their incoming material quality performance.
• Handle supplier quality issues and drive improvements and verification.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.

ทักษะ:

Electrical Engineering, Good Communication Skills

ประเภทงาน:

งานประจำ

• Support Site manager on the review of the Project contractors progress reports.
• Support Site manager in the preparation of weekly notes based on-site inspections and Contractor's progress reports.
• Support Site manager in reviewing the daily site logs made by Project contractors.
• Verify the contractors' contract with the technical specification documentation.
• Analyzing survey reports, long-range plans, maps and other data to design when open new projects area.
• Review the following site documents submitted by the Contraction.
• Inspections substation all aspect of Electrical works.
• Follow up on the correct application of the method statement that was agreed between the parties upon the prior review.
• Support Site manager to check when variation order issue by contractor base as contract unit cost.
• Safety awareness and alarm when found risk working place.
• Bachelor s degree in Electrical engineering or related field.
• 4 years of professional experience with site construction.
• Strong interpersonal and Demonstrated leadership and teamwork capabilities.
• Ability to work effectively as a member of an interdisciplinary team and independently as required.
• Dynamic, proactive, and autonomous.
• The ability to create good relationships in a new environment and good communication skills.
• Team player spirit is mandatory.
• Professional engineer license will be an advantage.
• The position is based on site.
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Goal-Oriented, Unity, Learning, Flexible.

ทักษะ:

Data Analysis, Enthusiastic, Electronics, Assembly, English

ประเภทงาน:

งานประจำ

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! Senior Engineer, Test Engineer Location: Lumentum Thailand, Navanakorn - Pathum Thani The Senior Test Engineer is a senior responsible for driving test engineering. This role working closely with Manufacturing, R&D, Product Engineering, Process Engineering, Quality, and Global Engineering teams to develop, execute, and impr ...

ทักษะ:

Quality Management System, Statistical Analysis, Quality Assurance, Problem Solving, Data Analysis

ประเภทงาน:

งานประจำ

ทักษะ:

Quality Assurance, Microsoft Office, Procurement, Recruitment, Assurance

ประเภทงาน:

งานประจำ

• Conduct regular supplier audits and assessments to evaluate compliance with quality standards, safety regulations, and contractual requirements.
• Develop and implement supplier quality improvement plans, identifying non-conformances and driving corrective actions to resolution.
• Monitor supplier performance metrics, including on-time delivery, defect rates, and documentation accuracy, and prepare comprehensive performance reports.
• Collaborate with suppliers to establish quality control procedures, specifications, and documentation systems.
• Review incoming materials and component inspections, working with logistics and receiving teams to ensure quality gates are maintained.
• Investigate quality issues, non-conformances, and complaints related to supplied materials, and implement preventive and corrective measures.
• Maintain detailed records of supplier performance, audit findings, and quality metrics for continuous improvement initiatives.
• Liaise between internal departments (procurement, engineering, production) and external suppliers to resolve quality concerns promptly.
• Support the development and maintenance of supplier quality documentation, procedures, and work instructions.
• Assist in the qualification and approval of new suppliers, conducting initial audits and assessments.
• What we're looking for.
• Bachelor's degree in Engineering, Quality Management, or a related discipline, or equivalent professional experience in quality assurance.
• Minimum 3-5 years' experience in supplier quality, quality assurance, or quality control roles, preferably within a manufacturing or logistics environment.
• Strong knowledge of quality standards and systems such as ISO 9001, ISO/TS 16949, or similar quality management frameworks.
• Demonstrated experience in conducting supplier audits, inspections, and assessments.
• Excellent analytical and problem-solving skills with the ability to investigate root causes and implement effective solutions.
• Proficiency in quality management tools and techniques, including statistical process control and corrective action procedures.
• Strong written and verbal communication skills, with the ability to communicate effectively with suppliers, internal stakeholders, and senior management.
• Proficiency in Microsoft Office applications and quality management software systems.
• Attention to detail and a commitment to maintaining accurate documentation and records.
• Ability to work independently and collaboratively within a team environment.
• Preferably, experience with supplier relationship management and continuous improvement methodologies such as Lean or Six Sigma.
• Fluency in both English and Thai (spoken and written) is advantageous.
• What we offer.
• At GPV Asia (Thailand) Co., Ltd., we are committed to creating a supportive and rewarding workplace for our employees. We offer a competitive compensation package commensurate with experience and qualifications. We provide opportunities for professional development and career advancement within our growing organisation. Our workplace culture emphasises collaboration, innovation, and continuous improvement. We maintain a safe and healthy working environment and provide support for our employees' physical and mental wellbeing. We also offer flexible working arrangements where possible to support work-life balance. Additionally, we provide training and development opportunities to help you enhance your skills and advance your career within the quality assurance and manufacturing sectors.
• About us.
• GPV Asia (Thailand) Co., Ltd. is a dedicated player in the manufacturing, transport and logistics sector, committed to delivering excellence and reliability to our clients. With a strong focus on quality assurance and control, we operate with integrity and a commitment to continuous improvement. Our team is driven by a passion for maintaining the highest standards across all operations and working collaboratively with our suppliers and partners to achieve mutual success. We pride ourselves on fostering a culture of excellence, accountability, and professional growth where employees are valued and supported in their development.
• Apply now.
• If you are a motivated quality professional seeking to make a meaningful impact within a dynamic manufacturing environment, we would like to hear from you. Please submit your CV, a covering letter, and any relevant certifications to our recruitment team. We look forward to receiving your application and discussing how you can contribute to the continued success of GPV Asia (Thailand) Co., Ltd.

ทักษะ:

Electronics

ประเภทงาน:

งานประจำ

• Our test platform development team is under Characterization and Analysis Group (CAG) that provides test solutions to support design learnings at the transducer level to the Transducer Design teams. We work closely with CAG-US and transducer designers in MN, USA, and Springtown, UK.
• Work with Test Development and R&D Operation teams to develop, qualify, and deploy test applications and test tools (HW/SW) for design feedback and test process control.
• Work with Design and R&D Operation teams to conduct the magnetic recording experiments to characterize performance and reliability, perform data analysis of the expected performance in comparison with the results and present results to Recording Head Development teams.
• Conceive and develop solutions to R&D Operation teams through the application of professionally accepted engineering techniques, practices and procedures.
• Exercise independent judgement in methods, techniques, and evaluation criteria for obtaining results.
• MS or PhD in Electrical Engineering, Physics, Mechatronics, or related fields.
• Good understanding of electromagnetics and electronics.
• Innovative and self-motivated worker who is driven by curiosity.
• Good interpersonal, communication and presentation skills.
• Able to work and communicate effectively with a diverse group of engineers.
• Have a good (can-do) attitude, willing to learn and take ownership of job responsibility.
• Able to effectively plan, control and take responsibility for group's results.
• Able to prioritize multiple tasks, manage conflicting deadlines, and work effectively in a dynamic environment.
• Fluent in English communication both spoken and written.
• Programming languages (Python, C).
• Automated data collection and processing, and analysis of large datasets.
• Use of measurement equipment (oscilloscopes, spectrum analyzers, etc.) is preferable.
• Teparuk Thailand.
• Home to over 4,000 employees, our Teparuk site specializes in producing nano-recording heads a crucial component for the read/write functionality of hard disk drives. At our Teparuk facility, work is both productive and enjoyable. You and your colleagues can grab breakfast, lunch, dinner, and snacks at our 24/7 on-site canteen and coffee shop. Stay active by taking a few laps around our running track or participating in volleyball, basketball, table tennis, badminton, or football at our on-site gymnasium and fitness center. We also offer a variety of activities, including music, dance, and aerobic classes. Alternatively, unwind in our lush green areas. Consider joining any of our employee resource groups (ERGs), such as Seagate Women in Leadership Network (SWLN), Seagate PRIDE: Thailand chapter, or Seagate's parents and caregivers' group. These ERGs provide educational and fun activities. Additionally, enjoy on-site festivals, celebrations, and opportunities to give back to the local community.

ทักษะ:

Industrial Engineering, Electrical Engineering, Mechanical Engineering, Power BI, English, Thai

ประเภทงาน:

งานประจำ

• Samut Prakan, Samut Prakan, Thailand.
• R0122509.
• HITACHI ENERGY (THAILAND) LIMITED.
• Quality Management.
• Full time.
• No.
• The Process & Continuous Improvement Engineer is responsible for designing, controlling, and optimizing manufacturing processes to ensure high efficiency, stability, and product quality. This role also leads Continuous Improvement (CI) initiatives across the organization using Lean, Kaizen, and Six Sigma methodologies to enhance productivity, reduce waste, and drive long-term cost savings.
• You will study, design, and improve production processes to enhance efficiency and stability, analyze and resolve production issues (Troubleshooting) to support real-time operations and develop and maintain process documentation such as WI, SOP, Process Flow, PFMEA, and Control Plans.
• You will monitor and analyze key process parameters to reduce variability and maintain process control, collect and analyze data such as cycle time, downtime, scrap rate, and defect rate also lead Lean, Kaizen, DMAIC, and waste elimination projects.
• You will develop and execute CI roadmaps at the department or organizational level; perform root cause analysis (RCA) and recommend improvement actions also track project performance and evaluating cost savings and ROI.
• You will promote a continuous improvement mindset across the organization, execute projects to reduce scraps, shorten cycle time, and increase output and analyze efficiency metrics such as OEE, FPY, yield to identify improvement areas.
• You will optimize production layout to improve workflow and reduce unnecessary movement, support the design and improvement of jigs, fixtures, and tools to enhance productivity and perform investment analysis and justify project ROI for new technology implementation.
• You will conduct training on Lean, Kaizen, 5S, and CI fundamentals for employees, support supervisors in process control and operational problem-solving also prepare reports and present improvement results to management.
• You will be responsible for ensure compliance with applicable external and internal regulations, procedures, and guidelines.
• Living Hitachi Energy's core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.
• You hold a bachelor's degree in industrial engineering, Mechanical Engineering, Electrical Engineering, or related field.
• Minimum 5 to10 years of experience in Process Engineering, Production, or Continuous Improvement.
• Knowledge or certification in Lean, Kaizen, Six Sigma (Yellow/Green Belt is an advantage).
• Strong analytical skills and proficiency in Excel, Power BI, or Minitab.
• Strong problem-solving, communication, and presentation skills.
• Good in English and Thai.
• Ability to work collaboratively across multiple departments.
• 1 month of guaranteed bonus (Fix bonus) plus Performance Bonus. (Depending on employee's performance result and Business performance).
• 10 days annual leave (Service year 0-5), 15 days annual leave (Service year 6-10), flexible working policy, Flexibility working time.
• Benefit according to local standards: Heath-care insurance benefits to employees and their dependents, annual health checkup, Provident Funds (employees can contribute up to 15%).
• Growth possibility: Learning and development platform, career movement opportunity within organization.
• Possibility to gain experience in international environment.
• Please be advised that the benefits provided may differ depending on the employee's country of hire.
• Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a.
• general inquiry form.
• on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.
• This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

ทักษะ:

Compliance, Legal, ISO 14001, English

ประเภทงาน:

งานประจำ

• Support site SHE activities to ensure compliance with company policies, legal requirements, and project HSE standards.
• Conduct SHE inductions, toolbox talks, and safety awareness activities for employees, contractors, and visitors.
• Monitor compliance with PPE requirements, work permits, and plant safety rules.
• Conduct routine SHE inspections and follow up on unsafe acts, unsafe conditions, and corrective actions.
• Assist in incident investigations, root cause analysis, and incident reporting.
• Monitor environmental controls, including dust, noise, waste management, spill prevention, and housekeeping.
• Coordinate with contractors and site personnel to ensure compliance with SHE and environmental requirements.
• Operation & Maintenance Phase.
• Conduct routine SHE inspections and monitor compliance with company standards and legal requirements.
• Inspect emergency equipment and support emergency response drills.
• Monitor environmental performance, including wastewater, air emissions, ambient air quality, noise, and other environmental parameters in accordance with legal requirements.
• Monitor compliance with environmental permits, EIA commitments, industrial waste management, and applicable environmental regulations.
• Prepare environmental monitoring records and reports required by regulatory authorities.
• Conduct SHE and environmental training for employees, contractors, and visitors.
• Support ISO management systems, internal and external audits, regulatory inspections, customer visits, and related documentation.
• Job Qualifications:Bachelor's degree in Occupational Health & Safety, Environmental Engineering, Industrial Safety, Environmental Science, or a related field.
• Minimum 3 years of experience in SHE, environmental management, or HSE within industrial plants, waste management, manufacturing, or construction projects.
• Good knowledge of Thai safety laws, environmental regulations, industrial waste management, and EIA requirements.
• Knowledge of ISO 14001, ISO 9001, ISO 45001, ESMS, and other relevant management systems.
• Experience supporting both construction and operation phases will be an advantage.
• Good coordination, communication, and reporting skills.
• Ability to respond effectively to site incidents and emergency situations.
• Good communication skills in Thai and English.
• Goal-Oriented, Unity, Learning, Flexible..

ทักษะ:

Procurement

ประเภทงาน:

งานประจำ

• Ensure the mechanical design integrity of new Power Plant, adhering to industry standards and best practices..
• Oversee EPC Contractors throughout engineering, procurement, construction, and commissioning, ensuring quality, timelines, and budgets are met..
• Coordinate with multi-discipline teams to integrate mechanical systems effectively into the overall plant design..
• Monitor contractor performance, review designs, and provide technical guidance to resolve engineering challenges..
• Enforce SHE (Safety, Health, and Environmental) policies, promoting safe work practices and regulatory compliance..
• Conduct risk assessments and implement quality control measures for fabrication, installation, and testing..
• Support commissioning and startup of mechanical systems, ensuring operational reliability..
• Job Qualifications.
• Bachelor s degree in mechanical engineering.
• 7 years of experience in Power Plant Design is a plus.
• Professional engineering license from the Council of Engineers is a plus.
• Understand overall process of Power plants.
• Able to work under pressure and tight timeline.
• Able to travel both domestically and upcountry.
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/work upcountry and abroad.
• Goal-Oriented, Unity, Learning, Flexible.

ทักษะ:

Automation

ประเภทงาน:

ฝึกงาน

• Support development or evaluation of robotics / AI / vision-based solutions.
• Participate in algorithm / logic validation (e.g. perception, motion planning, task execution).
• Assist in data collection, analysis and model validation for robotics applications.
• Engineering & Deployment .
• Conduct scenario identification and feasibility analysis for automation opportunities.
• Support robot deployment, testing, debugging and integration on shopfloor.
• Participate in pilot projects and real implementation, including issue troubleshooting.
• Track project progress and support end-to-end implementation.
• Bachelor/Master student in Robotics / Automation / AI / Mechatronics / EE.
• Strong interest in both robotics technology AND real-world engineering applications.
• Good problem-solving mindset and hands-on attitude.
• Able to work in cross-functional teams and fast-paced environment.
• Technical Capability .
• Programming skills: Python / C++ / ROS / OpenCV.
• Basic knowledge of robotics (kinematics, control, sensors).
• Familiar with AI / vision / simulation is a plus.
• Engineering Capability .
• Hands-on experience in robotics / automation projects.
• Familiar with debugging / testing / integration process.
• Experience with PLC / industrial system is a plus.
• Located in the high technology district, our site in Wuxi is a global manufacturing hub, where more than 5,000 employees deliver technical services, customer test, manufacturing and support capabilities. On site you can grab breakfast, lunch, dinner and snacks at our canteen, grab-and-go market and coffee shop. We offer basketball, badminton, yoga clubs and group exercise classes. We also have music, dance, photography and literature clubs galore, along with an active Toastmasters International chapter, and frequently have on-site festivals, celebrations and community volunteer opportunities.
• Location: Wuxi, China.
• Travel: None.

ทักษะ:

Industrial Engineering

ประเภทงาน:

ฝึกงาน

• Conduct on-site process observation, operation analysis, layout review, material flow path analysis, workload assessment, and workstation utilization analysis on production lines.
• Identify improvement opportunities to enhance production line efficiency.
• Support before-and-after comparison and benefit verification for improvement activities.
• AI Application Support.
• Support the identification of AI application scenarios based on real shop-floor pain points.
• Support AI project promotion and tracking.
• Support PoC testing, data preparation, feedback collection, and result tracking.
• Undergraduate or master's student majoring in Industrial Engineering, Artificial Intelligence, or a related field.
• Good understanding of manufacturing processes, production line operations, and shop-floor improvement.
• Strong problem-solving capability and hands-on mindset.
• Interest in using AI tools to support factory productivity improvement.
• Required Industrial Engineering Knowledge.
• Proficient in applying industrial engineering tools.
• Familiar with basic lean manufacturing concepts and related tools.
• Data and AI Capabilities.
• Basic data analysis capability.
• Experience with AI tools and developer skills is preferred.
• Located in the high technology district, our site in Wuxi is a global manufacturing hub, where more than 5,000 employees deliver technical services, customer test, manufacturing and support capabilities. On site you can grab breakfast, lunch, dinner and snacks at our canteen, grab-and-go market and coffee shop. We offer basketball, badminton, yoga clubs and group exercise classes. We also have music, dance, photography and literature clubs galore, along with an active Toastmasters International chapter, and frequently have on-site festivals, celebrations and community volunteer opportunities.
• Location: Wuxi, China.
• Travel: None.

ทักษะ:

Automation

ประเภทงาน:

งานประจำ

• Architect next generation slider-attach (micro-meter precision capability assembly machine) and adhesive dispense processes (nano-liter precision dispense capability), defining process concepts, materials strategies, and integration schemes to meet future HGA performance requirements.
• Lead early stage process invention, machine design, control system and feasibility through rapid experimentation, bench prototyping, and concept down selection based on technical merit and scaling risk.
• Develop deep physics based understanding of adhesive behavior and slider attach mechanics, including bondline control, wetting/spread dynamics, cure effects, and thermo mechanical interactions.
• Identify and quantify critical KPIVs and their relationships to KPOVs (CTQs), building transfer functions, interaction maps, and process limits to guide design and downstream optimization.
• Define and co develop novel dispense, placement, and curing tool concepts, including automation, vision alignment, and process control strategies needed for scalable implementation.
• Partner closely with advanced HGA/TGA design and materials teams to influence product architecture, adhesive selection, and attach schemes based on process capability and risk.
• Collaborate with global teams, including U.S.-based design and engineering partners, requiring flexibility to support cross time zone engagement, including periodic evening meetings.
• Deliver M1 ready process solutions, including validated concepts, quantified KPIV/KPOV relationships, and clear scaling/optimization guidance for handoff to integration teams.
• Background in Hard Disk Drive manufacturing or precision assembly processes, with solid engineering fundamentals is advantage.
• Experience in process development, materials, or manufacturing engineering, with exposure to areas such as adhesives, dispense processes, or cleaning technologies considered a plus.
• 12+ years demonstrated hands-on expertise in the design and development of micro-precision assembly equipment, incorporating multi-axis motion systems and integrated sensor technologies.
• Basic understanding of data analysis, statistics, or structured problem-solving methods (e.g., DOE, Six Sigma concepts).
• Familiarity with mechanical behavior, materials interaction, or reliability considerations in assembly processes.
• Strong analytical and problem-solving skills, with the ability to learn quickly and apply engineering principles to new challenges.
• Good communication skills in English (written and spoken), capable of working effectively with global and cross-functional teams.
• Demonstrated teamwork and collaboration, with willingness to learn, take initiative, and grow into a technical leadership role.
• Teparuk Thailand.
• Home to over 4,000 employees, our Teparuk site specializes in producing nano-recording heads a crucial component for the read/write functionality of hard disk drives. At our Teparuk facility, work is both productive and enjoyable. You and your colleagues can grab breakfast, lunch, dinner, and snacks at our 24/7 on-site canteen and coffee shop. Stay active by taking a few laps around our running track or participating in volleyball, basketball, table tennis, badminton, or football at our on-site gymnasium and fitness center. We also offer a variety of activities, including music, dance, and aerobic classes. Alternatively, unwind in our lush green areas. Consider joining any of our employee resource groups (ERGs), such as Seagate Women in Leadership Network (SWLN), Seagate PRIDE: Thailand chapter, or Seagate's parents and caregivers' group. These ERGs provide educational and fun activities. Additionally, enjoy on-site festivals, celebrations, and opportunities to give back to the local community.
• About Us.
• With more than four decades of storage innovation, Seagate empowers humanity to thrive in the data age and helps people and businesses navigate the ever-expanding data landscape.
• We craft precision-engineered, cutting-edge solutions that help the world store and manage exponential data growth.
• Seagate is powered by our talented and passionate workforce of 29,000 employees across the globe who embody.

ทักษะ:

Cost Estimation, AutoCAD

ประเภทงาน:

งานประจำ

• ปริญญาตรี สาขาสถาปัตยกรรมศาสตร์, วิศวกรรมโยธา, Quantity Surveying, Construction Management หรือสาขาที่เกี่ยวข้อง.
• มีประสบการณ์ด้าน Quantity Survey / Cost Control / Construction โดยเฉพาะงานสถาปัตยกรรมหรือ Finishing.
• สามารถอ่านแบบ Architectural Drawing และ Construction Drawing ได้ดี.
• มีความรู้ด้าน BOQ, Quantity Take-off, Cost Estimation และ Progress Payment.
• สามารถใช้ Microsoft Excel และ AutoCAD ได้ดี..

ทักษะ:

Quality Assurance, AutoCAD, Revit, English

ประเภทงาน:

งานประจำ

• Able to provide Sanitary and Fire Protection Design services.
• Carry out engineering design in accordance with local codes and relevant international design codes.
• Assume responsibility and undertake engineering tasks of increasing scope and complexity.
• Responsible for analysis of information, production of design, tenders and technical report writing.
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants.
• Observe, review and report of works on site.
• Develop building services designs and calculations.
• Performs other related duties as assigned.
• Maintain regular correspondence with Project Clients, Architects, Engineers and Project Managers as required in order to keep designs moving forward to completion.
• Able to perform M&E inspections of commercial and industrial facilities and prepare written audit reports and recommendations for Clients.
• Demonstrate effective communication, presentation, networking and consulting.
• Mentor and coach junior peers across the discipline and delegate appropriately.
• Encourage excellent team performance through specific and constructive feedback.
• Degree in Environmental Engineering discipline for Sanitary and Fire Protection Design Engineering.
• Engineers with 7 to 15 years' experience.
• Interest in designing of various commercial buildings such as residential, commercial, institutional, hotel or data center projects.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Competent user of Revit, AutoCAD and other engineering software tools and other Sanitary and Fire Protection software would be advantage.
• Excellent written & spoken English communication skills are essential for effective coordination with international clients and multidisciplinary teams.
• Able to work independently & exercise initiative.
• A team, client and delivery focused working style.
• Able to commence within short notice period is an advantage.
• Have an Environmental engineer professional license (Sa-man) for Sanitary and Fire Protection Design Engineer.
• Friendly international working environment with a wide variety of interesting and challenging task.
• Possibility to grow professionally and advance in career.
• 5-day work week (Monday-Friday), 09:00-18:00 hrs.
• Group Life & Health Insurance, including OPD coverage.
• Annual health check-up.
• Social club activities and annual company events.
• Training and development programs.
• Public holidays as per company policy.
• International exchange opportunities (e.g., New Zealand, Australia).
• Performance-based bonus.
• Provident Fund etc.