เงื่อนไขการค้นหา

ทักษะ:

Electrical Engineering, Product Development, Electronics, English

ประเภทงาน:

งานประจำ

• Carrier is seeking a.
• Design Engineer.
• (Electrical & Electronic Components).
• to support the qualification, evaluation, and validation of electrical and electronic components used in air conditioning products. This role works closely with cross-functional teams to ensure product quality, performance, reliability, and compliance with engineering standards.
• Evaluate and qualify electrical and electronic components for new and existing products.
• Conduct testing and validation activities to ensure compliance with technical and quality requirements.
• Support new product development and engineering change activities.
• Investigate component-related issues and provide technical recommendations.
• Collaborate with suppliers, engineering teams, and manufacturing teams to support product qualification and implementation.
• Prepare technical documentation, test reports, and engineering records.
• Bachelor's Degree in Electrical Engineering, Electronics Engineering, Mechatronics Engineering, or related field.
• Experience in electrical/electronic component testing, validation, product development, or quality engineering is preferred.
• Knowledge of electrical and electronic components, circuits, and engineering test methods.
• Strong analytical and problem-solving skills.
• Good communication and collaboration skills.
• Good command of English.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Product Development, Product Design, Cost Analysis, SOLIDWORKS, AutoCAD

ประเภทงาน:

งานประจำ

• We are seeking a skilled.
• Senior Design Engineer (Indoor).
• to lead the design and development of air-conditioner indoor unit structures. This role will focus on product design, performance validation, and cost optimization to support new model development.
• Design and develop indoor unit structures (3D models and technical drawings).
• Conduct structural testing, analysis, and validation to ensure product performance and reliability.
• Perform cost analysis and optimization aligned with product targets.
• Support new product development (NPD) from concept through testing phase.
• Ensure designs meet engineering standards, quality, and cost requirements.
• Bachelor's Degree in Mechanical Engineering or related field.
• Minimum 3 years of experience in air-conditioner or HVAC structure design.
• Proficient in SolidWorks, AutoCAD, and MS Office.
• Strong understanding of design, testing, and cost engineering principles.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Industrial Engineering, Mechanical Engineering, Product Development, SOLIDWORKS, Teamwork, AutoCAD, English, Thai

ประเภทงาน:

งานประจำ

• Design curing molds and tooling solutions: Develop dimensional technical standards and detailed designs for curing mold components and associated tooling based on tire geometrical definitions and engineering requirements.
• Ensure manufacturing readiness and data quality: Provide accurate and timely manufacturing data, including design drawings, technical specifications, and bill of materials, to support mold manufacturing and production activities.
• Support continuous improvement and technical problem-solving: Collaborate with manuf ...
• Designing curing mold components and associated tooling according to technical standards and customer requirements.
• Creating and maintaining engineering drawings, design documentation, and bills of materials.
• Ensuring mold definitions comply with design guidelines and manufacturing constraints.
• Supporting mold manufacturing teams with technical expertise and troubleshooting.
• Analyzing tooling performance and identifying opportunities for improvement.
• Assisting in the resolution of dimensional, quality, and manufacturing issues.
• Collaborating with product, manufacturing, and quality teams throughout the development process.
• Supporting continuous improvement initiatives related to mold and tooling design.
• WHO WE ARE LOOKING FOR.
• Required.
• Bachelor's Degree or higher in Mechanical Engineering, Manufacturing Engineering, Tooling Engineering, Industrial Engineering, or related fields.
• Experience in mechanical design, tooling design, mold design, or manufacturing engineering environments.
• Ability to interpret technical drawings and engineering specifications.
• Strong analytical and problem-solving skills.
• Good communication and teamwork capabilities.
• Business proficiency in Thai and English.
• Preferred.
• Experience with CAD software (e.g., CATIA, SolidWorks, Creo, AutoCAD).
• Knowledge of mold manufacturing, tooling processes, or industrial production environment.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Product Development, Financial Reporting, Project Management, Industrial Design, Problem Solving, Negotiation, Accounting, SAP

ประเภทงาน:

งานประจำ

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Functional Area: Engineering.
• Career Stream: Design Engineering Mechanical.
• SAP Short Name: SLE-ENG-DME.
• Job Level: Level 09.
• IC/MGR: Individual Contributor.
• Direct/Indirect Indicator: Indirect.
• Summary.
• The Senior Lead Engineer, Mechanical Design develops new mechanical systems/modules and maintains existing designs. Research mechanical concepts and create system solutions using 3D modeling and simulation software. Complete calculations and test, validate, and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing process of the mechanical system that they have designed.
• The Senior Lead Engineer, Mechanical Design works with cross functional teams of other engineers, customers, supply chain and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.
• Detailed Description.
• Lead the design, development and implementation of technical solutions in multiple domains. Participate in project planning and scheduling.
• Provide technical leadership and direction to a team of engineers. May be a recognised expert (go to person) in one or more technical areas.
• Review, interpret and may negotiate customer requirements/specifications and provide customer feedback.
• Lead the deployment of strategic programs and coordinate site-wide deployment efforts.
• Proactively promote industry best practices.
• May manage relationships with key vendors/partners.
• Prepare calculations on the proposed solution before completing technical drawings.
• Create designs in line with company procedure, regulations and client standards.
• Submit drawings to management, engineering teams and customers for review.
• Use customer feedback and data to upgrade, improve or repair the company's existing machines.
• Provide support during the manufacturing process.
• Finalize designs and send prints to the production department.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage/lead complex, multiple line engineering projects that may also involve other functions. Demonstrate solid understanding of the technical, financial and people aspects of the project. Able to create a project/change management plan and ensure that the project is delivered within the assigned time and budget. Ability to recognize project barriers and develop mitigation plans.
• Leadership - Demonstrate "People & Team Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning - Ability to create financial plans for your projects, align them internally with your line of management and other functions and externally if needed. Create project plans, profitability calculations, risk and sensitivity analysis, able to recognize barriers and mitigate profitability risks. Fully knowledgeable about internal and external financial reporting, accounting and tax requirements relevant to your area of expertise.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• This is also requirement for manager level. I capture from Global job description.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Product Development, Microsoft Office, Data Analysis, SOLIDWORKS, Power BI, AutoCAD, English

ประเภทงาน:

งานประจำ

• We are looking for a Design Engineer (Technical Data) to develop and manage engineering data and technical specifications for air conditioning products.
• This role focuses on preparing and maintaining engineering data books and technical datasets, supporting product development, system design, and internal engineering functions across the product lifecycle.
• Prepare and maintain engineering data books for RAC, LC, and VRF products.
• Compile and validate technical data from engineering teams (performance, specifications, system data).
• Ensure accuracy and consistency of engineering datasets and product technical information.
• Support updates and revisions of technical data for new products and design changes.
• Assist in data analysis and technical data preparation to support engineering activities.
• Manage data logs, documentation systems, and file structures.
• Support integration of technical data with product models, CAD files, and internal systems.
• Coordinate with cross-functional teams to ensure timely and accurate data availability.
• Provide technical data support to Engineering, Sales, and Service teams.
• Bachelor's degree in Engineering (Mechanical, Electrical, Industrial, or related field).
• 1-3 years of experience in HVAC or related engineering/data role.
• Basic understanding of air conditioning (HVAC) systems.
• Proficient in Microsoft Office (Excel, PowerPoint).
• Familiarity with AutoCAD / SolidWorks (2D/3D) is an advantage.
• Knowledge of data tools (e.g., Power BI, AI tools) is an advantage.
• Strong analytical mindset with attention to data accuracy and structure.
• Good command of English.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Industrial Engineering, Electrical Engineering, Mechanical Engineering, Product Design, SOLIDWORKS, Power BI, AutoCAD, English

ประเภทงาน:

งานประจำ

• We are seeking a.
• Design Engineer (Products Handbook).
• to support the development and maintenance of technical product literature for HVAC products, including Residential Air Conditioning (RAC), Light Commercial (LC), and VRF systems.
• The role is responsible for creating and updating Product Handbooks, Owner Manuals, Installation Manuals, and Service Manuals for new product launches and existing products. You will work closely with Engineering, Sales, and Service teams to ensure technical information is accurate, user-friendly, and ready for customer use.
• Create, update, and maintain Product Handbooks and technical literature for HVAC products.
• Develop Owner Manuals, Installation Manuals, Service Manuals, and related product documentation.
• Support documentation activities for new product launches and engineering changes.
• Gather, compile, and verify technical data from Engineering and cross-functional teams.
• Manage document records and coordinate website uploads to ensure product literature is available to customers.
• Support Sales and Service teams by providing accurate technical documentation.
• Ensure all published materials meet quality and accuracy standards.
• Continuously improve documentation processes and publication effectiveness.
• Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field.
• 1-3 years of experience in HVAC, engineering documentation, product design, or related industries.
• Fresh graduates are welcome to apply.
• Knowledge of HVAC or air-conditioning systems is an advantage.
• Good command of English and strong communication skills.
• Detail-oriented with the ability to manage multiple tasks simultaneously.
• Familiarity with programs: MS Office, AutoCAD and SolidWorks (2D/3D), Adobe Illustrator, Adobe InDesign, and Adobe Photoshop, Power BI, AI and digital productivity tools.
• Experience and familiarity with creating technical manuals, product handbooks, or engineering documentation and management process is preferred.
• Ability to interpret engineering drawings and technical specifications is advantaged.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

AutoCAD

ประเภทงาน:

งานประจำ

• ออกแบบปรับปรุงระบบไฟฟ้า และระบบควบคุมเครื่องจักรในงานอุตสาหกรรม สำรวจหน้างานเพื่อเก็บรายละเอียดเพื่อใช้ในการออกแบบ (เดินทางไปต่างจังหวัดได้) ประเมินราคาต้นทุนและทำรายการ BOQ สำหรับระบบไฟฟ้าและระบบควบคุมที่เกี่ยวข้อง ทำเอกสาร technical proposal สำหรับประกอบการเสนอราคาหรือจัดหาอุปกรณ์ไฟฟ้า ประสานงานสำหรับงานออกแบบ, Supervise งานติดตั้งและ Commissioning ทำเอกสารสำหรับเสนออนุมัติ drawing และเอกสารที่เกี่ยวข้อง ร่วมประชุมสำหรับงานโครงการ ตรวจสอบอุปกรณ์ไฟฟ้า ในช่วง Factory Acceptance Test (FAT).
• วุฒิการศึกษาระดับปริญญาตรี วิศวกรรมศาสตร์ สาขาวิศวกรรมไฟฟ้า (G.P.A. > 2.70) มีความสา ...

ทักษะ:

Software Development, Product Development, Project Management, Industrial Design, Problem Solving, Negotiation, Accounting, Data Entry, Automation, Budgeting, Scrum, SAP

ประเภทงาน:

งานประจำ

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Functional Area: Engineering.
• Career Stream: Design - Software Engineering.
• SAP Short Name: LEN-ENG-DSE.
• Job Level: Level 08.
• IC/MGR: Individual Contributor.
• Direct/Indirect Indicator: Indirect.
• Summary.
• The Lead Engineer, Software develops, debugs, tests, deploys and supports code to be deployed in systems/products/equipment for various applications. They write, debug, maintain, and test software in various common languages and for software at various levels in the hierarchy (from Firmware to Application). Software creation follows an agreed to development process (such as Agile, Scrum, etc.) and complies with the product life cycle development (phase/gate deliverables).
• The Lead Engineer, Software works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.
• Detailed Description.
• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Analyze, design and develop tests and test-automation suites.
• Design and develop a processing platform using various configuration management technologies.
• Test software development methodology (may be done in agile environment).
• Provide ongoing maintenance, support and enhancements in existing systems and platforms.
• Collaborate cross-functionally with customers, users, project managers and other engineers including Peer-Reviews to achieve elegant solutions.
• Provide recommendations for continuous improvement.
• Work alongside other engineers on the team to elevate technology and consistently apply best practices.
• Keep up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage a single line engineering project with a limited number of participants. Create a project/change management plan, establish and distribute project roles, and communicate what is needed from the project participants in order to make the project successful.
• Leadership - Demonstrate "Individual Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning -Solid understanding of Celestica's budgeting and accounting system and the cost accounting practices relevant to engineering work. Always act with the awareness of your work's impact on financial results. Communicate clearly and timely all aspects of your work that may have an influence on the profitability of the project and/or what is necessary for proper accounting and controlling.
• The following competencies may also be required and performed with help or under supervision: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 3 to 8 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

AutoCAD

ประเภทงาน:

งานประจำ

• ออกแบบและประเมินราคางาน Solar.
• เขียนแบบ Solar.
• Project Coordinator จนโครงการสำเร็จ.
• ปริญญาตรีสาขาวิศวกรรมไฟฟ้า.
• ประสบการณ์การออกแบบ หรือ เขียนแบบ 1-2 ปี หากเคยเป็น Solar Design จะพิจารณาเป็นพิเศษ.
• สามารถใช้โปรแกรม Autocad / PVsyst สำหรับงานออกแบบ.
• สามารถเดินทางไปปฏิบัติงานต่างจังหวัดได้.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Product Development, Industrial Design, Data Entry

ประเภทงาน:

งานประจำ

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• Summary.
• The Senior Lead Engineer, Electrical Design develops new electrical systems/circuits for various applications. Research system ideas and draw up plans for these systems, and capture them in schematics and system specifications. Test, simulate, validate and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing of the electrical systems they have designed.
• The Senior Lead Engineer, Electrical Design works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.
• Detailed Description.
• Lead the design, development and implementation of technical solutions in multiple domains. Participate in project planning and scheduling.
• Provide technical leadership and direction to a team of engineers. May be a recognized expert (go to person) in one or more technical areas.
• Review, interpret and may negotiate customer requirements/specifications and provide customer feedback.
• Lead the deployment of strategic programs and coordinate site-wide deployment efforts.
• Proactively promote industry best practices.
• May manage relationships with key vendors/partners.
• Design, modify and implement systems that meet customer and Celestica needs. E.g. creation of Schematics, Bills of material, diagrams, drawings, etc.
• Testing, simulation and measuring (including troubleshooting) the performance of systems.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Analyze and interpret data and information.
• Recommend modifications for systems.
• Create reports and documentation.
• May be a recognized expert (go to person) in one or more technical areas.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 4 to 6 years in a similar role or industry.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Procurement, CAD

ประเภทงาน:

งานประจำ

• Bangkok, Bangkok, Thailand.
• Eco Plant Services Co., Ltd.
• Apply for Position.
• Or refer someone.
• Job Openings.
• Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• About the job Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• VSPP Power Plant & Renewable field.
• Fuel MSW & Industrial Waste Power Plant is a special consideration.
• EPC Business Turnkey (Engineering, Procurement and Construction).
• Satisfy Owner Requirements based on Design, Regulations, Laws, Standards, Codes and advise customer solutions.
• Provide design for safe operation & maintenance with recommended solutions to owner.
• Familiar with the process of related permits: EIA, EHIA, COP, Construction Permit, Factory License requirements, PEA, and ERC.
• Prepare Tendering, Bidding, and Proposal in terms of Technical Data & support for Mechanical Process, Boiler, Ash Handling System, Steam Turbine, Air-Cooled/Water-Cooled Condenser, Air Compressor, Fuel Feeding System, Flue Gas Treatment System, Water Treatment Plant according to TOR.
• Clarify requirements and follow up on, or clear, pending issues and lists via Piping Specifications & Routes, Equipment General Arrangement (GA), P&ID as mechanical integration with other systems such as Tie-in or Terminal Points.
• Verify and cross-check Heat and Mass Balance, Firing Diagram of Combustion, Water Balance, Utility Consumption in Mechanical field.
• Raise any mechanical concern or critical issue to team, if any, for consultation and resolution with team decision-makers, such as deviations from TOR, high impacts to cost, improper design, unsafe operation, or mismatches with other systems.
• Maintain close contact with Owners, Suppliers, Contractors, Vendors, and internal departments for implementation and rectification of related issues.
• Bachelor's Degree in Mechanical Engineering.
• At least 3-5 years of experience in Power Plant Design is preferred.
• Proficient in CAD software and Drawing Viewer applications.
• Understand the basic overall process of a Power Plant.
• Basic knowledge of rotating machinery such as Boiler Feed Water Pumps, Fans, Valve Types, Piping, Pressure Parts, ASME, ASTM, ANSI, JIS, DIN, GB, and EN.
• Commissioning and testing of machinery and piping such as Pressure Test, Cleaning, Leak Test in Water, Air, Chemical, etc.
• Basic knowledge of Operation & Maintenance in Power Plants, Consumption & Consumables for running Power Plants, Discharge Ash Treatment, Flue Gas Emission Control, Water Regulations.
• Communication skills with the ability to quickly summarize key points.
• Coordination with Suppliers, Owners, Contractors, Team Members, and internal departments.
• Apply for Position.
• Or refer someone.
• Share.
• Facebook.
• Line.
• LinkedIn.
• X (Formerly Twitter).
• Whatsapp.
• Email.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Product Development, Project Management, SAP, English

ประเภทงาน:

งานประจำ

• We are looking for a Design Engineer (PCB & Circuit) to support new product development (NPD) for air conditioner products.
• This role focuses on PCB and circuit design, while also providing exposure to component engineering, qualification, and cost improvement initiatives, ensuring product performance, reliability, and smooth transition to mass production.
• Design and develop circuit and PCB for air conditioner products.
• Support new product development (NPD) from design to mass production.
• Create and maintain BOM and support prototype development.
• Verify component specifications to ensure design feasibility and compliance.
• Support component qualification and part approval processes.
• Contribute to cost optimization initiatives (e.g., BOM adjustments, second sourcing).
• Coordinate with cross-functional teams for trial production and testing.
• Conduct testing according to standards; troubleshoot and resolve design issues.
• Prepare test reports and technical documentation.
• Issue drawings and engineering documents to support mass production.
• Bachelor's degree in Electrical / Electronic Engineering or related field.
• Minimum 3 years of experience in PCB, circuit, or hardware design engineering.
• Experience in product development (NPD) is preferred.
• Hands-on experience with oscilloscope and electronic testing equipment.
• Familiarity with SAP (BOM management) is an advantage.
• Understanding of EMI and electrical safety standards.
• Strong analytical and problem-solving skills.
• Good project management skills; able to meet deadlines.
• Proficient in Microsoft Excel and PowerPoint.
• Good command of English.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Product Development, Cost Analysis, Architecture, English

ประเภทงาน:

งานประจำ

• We are seeking a Design Engineer (System Design) to lead the development of air conditioning and heat pump systems, focusing on system performance, control logic, and product reliability.
• This role plays a key part in new product development (NPD), ensuring system design meets performance, cost, and project timeline requirements.
• Design and develop HVAC, air conditioning, and heat pump systems.
• Define and manage system architecture and control logic specifications.
• Conduct system performance analysis and validation.
• Support cost analysis and cost reduction initiatives.
• Develop and execute test plans and lab validation activities.
• Manage project schedules and ensure on-time delivery.
• Ensure product quality, reliability, and compliance with standards.
• Provide technical guidance and support to cross-functional teams.
• Contribute to team capability development and knowledge sharing.
• Bachelor's degree in Mechanical Engineering, or related field.
• Minimum 3-5 years of experience in HVAC / air conditioning / heat pump system design.
• Strong knowledge of HVAC systems, thermodynamics, and control logic.
• Experience in system design, testing, and validation.
• Good project coordination and problem-solving skills.
• Good command of English (spoken and written).
• Able to travel/work abroad (1-2 months).
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

15 ปีขึ้นไป

ทักษะ:

Product Development, Industrial Design, Architecture, Data Entry, Assembly, CAD

ประเภทงาน:

งานประจำ

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Job Title: Lead Engineer, PCB Layout Engineer.
• Functional Area: Engineering (ENG).
• Career Stream: Design Engineering Electrical (DEE).
• Role: Lead Engineer (LEN).
• Job Code: LEN-ENG-DEE.
• Job Band: 08.
• Direct/Indirect Indicator: Indirect.
• Summary.
• The PCB Senior Layout Engineer works with a cross functional design engineering team, customers, manufacturing engineering and project managers to ensure robust and high quality product development. Enhance PCB designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations. Provide support throughout the manufacturing process of the electrical/mechanical system that they have designed when necessary.
• Detailed Description.
• Spearhead the pcb design, development, and implementation of technical solutions for complex, multi-domain projects.
• Act as a skilled pcb engineer, offering technical solutions and directions to design peers. Will also analyze pcb assembly and recommend solutions.
• Review and interpret customer requirements and specifications, and potentially serve as the secondary customer contact.
• Create, modify, and improve pcb designs and techniques using Computer-aided Design (CAD) software.
• Support creation and review of ECAD logical and physical libraries.
• Understands and replies to pcb fabrication technical queries.
• Research new system ideas, create design plans, and modify existing systems to meet both customer and Celestica's needs. Will also solve complex problems and create designs that adhere to all relevant procedures and standards.
• Participate in project planning, scheduling, and design reviews. Will provide feedback and support to other engineering functions from the initial design phase through manufacturing to resolve any issues.
• Keep up-to-date with relevant industry knowledge and regulations to ensure all designs and processes remain compliant.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• PCB Design Expertise: Expert in Cadence Allegro (versions 17.x/24.x) or Altium Designer 26, and experienced with high-density PCBs (up to 20 layers) and high-speed layout designs with high-speed interfaces with controlled impedance, microvias and define good power planes.
• Technical Knowledge: Good knowledge of PCB & PCBA manufacturing processes, industry and quality standards (including IPC), Signal Integrity, EMC, and EMI layout requirements.
• Experience in high-speed digital and analog hardware design and development, with an understanding of architecture, reliability, prototyping, and failure analysis. Specific experience with memory, PCIe, Ethernet, power supply is highly valued.
• The ability to work collaboratively in a global team to meet aggressive deadlines and quality standards is required. A self-motivated individual capable of working in a dynamic environment with complex design requirements.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Typical Experience.
• 10 to 15 years of related experience; experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Problem Solving, Data Entry, Linux

ประเภทงาน:

งานประจำ

• Support Hardware and Software Team in bring up and validation of Networking, Storage, and Server products during NPI phase per Hardware validation Test Plan.
• Setup the and manage Test Rack, Test equipment and Unit Under Test for hardware validation.
• Work with cross-functional teams to troubleshoot and address any hardware issues identified during validation.
• Bachelors Degree in Electronic Engineering, Computer Engineering, Telecom Engineering or equivalent.
• 0-5 years of experience with hardware testing and validation.
• Familiar with electrical design tools such as Logic analyzer, Oscilloscopes.
• Familiar with common communication protocol such as I2C, SPI, DDR, PCIe, USB, Ethernet, SATA, NVMe.
• Hands-on lab debugging, diagnostic errors. Problem solving and corrective actions.
• Familiar with Linux environment and Ethernet protocol.
• Self-motivated with a strong multidisciplinary background.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Knowledge in Analog circuit design and Digital circuit design.
• Knowledge in Electronic component.
• Familiar with electrical design tools such as Logic analyzer, Oscilloscopes.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 0-3 years of experience with hardware Design.
• Typical Education.
• Bachelors Degree in Electronic Engineering, Computer Engineering, Telecom Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Product Development, English

ประเภทงาน:

งานประจำ

• We are seeking a motivated.
• Design Engineer (Certification).
• to support product certification activities for air conditioning systems, with a focus on European regulatory standards. This role is ideal for early-career engineers who are interested in product compliance, testing, and working with international certification bodies.
• Support certification activities for air conditioners and related components.
• Prepare and manage technical documentation for product certification.
• Plan and track certification processes to meet regulatory requirements.
• Prepare sample units for testing and certification.
• Coordinate with third-party certification agencies, especially for EU market requirements.
• Work closely with internal teams on new product development to ensure compliance.
• Bachelor's Degree in Engineering (Mechanical, Electrical, or related field).
• 0-3 years of experience in air conditioning manufacturing or product certification/testing environments.
• Familiarity with product certification processes or regulatory standards is a plus.
• Good command of English (written and spoken).
• Proficient in MS Excel and MS Outlook.
• Detail-oriented with strong coordination and planning skills.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Product Development, Product Design, Cost Analysis, Petrochemical, SOLIDWORKS, Teamwork, AutoCAD, English

ประเภทงาน:

งานประจำ

• We are seeking a Senior Materials Engineer to support material development and evaluation for air conditioner products.
• This role focuses on material selection, qualification, and cost optimization, while ensuring product performance, reliability, and project delivery timelines. You will also play a key role in coordinating testing activities and supporting engineering teams within product development projects.
• Design and plan material development activities for air conditioner components (e.g. ...
• Develop and evaluate materials to ensure performance and compliance with specifications.
• Perform material qualification, investigation, and failure analysis.
• Conduct cost analysis and support cost reduction initiatives.
• Monitor and control development schedules and cost-saving targets.
• Support and supervise testing activities to ensure alignment with standards and timelines.
• Utilize and manage laboratory equipment (e.g., tensile tester, impact tester, MFR, HDT/VICAT, climatic chamber, weather meter).
• Collaborate with cross-functional teams to support product development and mass production.
• Bachelor's or Master's degree in Materials Engineering, Petrochemical Engineering, or Polymer Engineering.
• 3-5 years of experience in product development, R&D, product design, or quality engineering (preferably in air conditioning or home appliance industry).
• Strong knowledge of material properties (plastics, metals, insulation, etc.) and testing methods.
• Experience in project coordination, development planning, or cost analysis.
• Proficient in Microsoft Excel and PowerPoint.
• Familiarity with AutoCAD or SolidWorks is an advantage.
• Strong teamwork and collaboration skills.
• Good command of English (communication & writing).
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Product Development, Product Design, Cost Analysis, Petrochemical, SOLIDWORKS, Teamwork, AutoCAD, English

ประเภทงาน:

งานประจำ

• We are looking for a Materials Engineer to support product development and material evaluation for air conditioner products.
• This role focuses on material selection, qualification, and cost optimization, ensuring product reliability, quality, and performance across various components such as plastics, metals, insulation, and packaging.
• Develop and evaluate materials used in air conditioner components (e.g., plastics, steel, insulation, packaging).
• Conduct material qualification and failure analysis to ensure performance and reliability.
• Perform cost analysis and support cost reduction initiatives through material optimization.
• Manage and operate laboratory testing equipment (e.g., tensile tester, impact tester, MFR, HDT/VICAT, climatic chamber, weather meter).
• Interpret test results and provide recommendations for material improvement and selection.
• Collaborate with cross-functional teams including R&D, quality, and production.
• Bachelor's or Master's degree in Materials Engineering, Petrochemical Engineering, or Polymer Engineering.
• 0-5 years of experience in product development, R&D, product design, or quality engineering (fresh graduates are welcome).
• Knowledge of material properties (plastics, metals, insulation, etc.) is an advantage.
• Familiarity with CAD tools (AutoCAD / SolidWorks) is a plus.
• Good analytical and problem-solving skills.
• Strong teamwork and collaboration mindset.
• Proficient in Microsoft Excel and PowerPoint.
• Good command of English.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Electrical Engineering, Mechanical Engineering, Product Development, Product Testing, English

ประเภทงาน:

งานประจำ

• Carrier is seeking a.
• Senior Design Engineer (Motor).
• to lead the development, testing, and validation of motors and electrical components for air conditioning products. This role is responsible for ensuring product performance, safety compliance, and technical excellence while supporting new product development and manufacturing operations.
• Lead testing and evaluation of motors and electrical components to ensure compliance with safety standards and product requirements.
• Drive design, development, and validation activities for new products and engineering improvements.
• Analyze and troubleshoot motor and electrical component issues to identify root causes and implement corrective actions.
• Support new component development, qualification, and implementation activities.
• Resolve technical issues on production lines to ensure product quality and manufacturing efficiency.
• Prepare and review engineering drawings and technical documentation.
• Collaborate with suppliers, cross-functional teams, and stakeholders to support product development and project execution.
• Bachelor's Degree in Electrical Engineering, Mechatronics Engineering, Mechanical Engineering, or related field.
• 5+ years of experience in motor design, electrical component development, product testing, or HVAC product engineering.
• Strong knowledge of motors, electrical systems, and air conditioning products.
• Experience in product validation, troubleshooting, and engineering problem-solving.
• Ability to interpret engineering drawings and technical specifications.
• Strong analytical, communication, and project coordination skills.
• Good command of English.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Automation

ประเภทงาน:

งานประจำ

Only shortlisted candidates will be contacted.