เงื่อนไขการค้นหา

ประเภทงาน:

งานประจำ

• ออกแบบและจัดทำ แม่พิมพ์ใหม่สำหรับ New Product รวมถึงแม่พิมพ์ทดแทน.
• ตรวจสอบโครงสร้างและสภาพแม่พิมพ์ พร้อมควบคุมและติดตาม แผนการจัดทำแม่พิมพ์ ให้เป็นไปตามกำหนด.
• วางแผนและควบคุมการ บำรุงรักษาแม่พิมพ์ สำหรับแม่พิมพ์พลาสติก ยาง โฟม และแม่พิมพ์ที่อยู่ภายนอกบริษัท.
• ดำเนินการ Modify และซ่อมแซมแม่พิมพ์ พลาสติก ยาง โฟม รวมถึงแม่พิมพ์ที่ส่งไปใช้งานภายนอก.
• ประสานงานกับหน่วยงานที่เกี่ยวข้องและผู้รับจ้างภายนอก เพื่อให้แม่พิมพ์พร้อมใช้งานและเป็นไปตามมาตรฐานที่กำหนด.
• ติดตามปัญหา วิเคราะห์สาเหตุ และปรับปรุงแม่พิมพ์เพื่อเพิ่มประสิทธิภาพในการผลิต.
• จัดทำและติดตามแผนงานด้านแม่พิมพ์ รวมถึงรายงานผลการดำเนินงานที่เกี่ยวข้อง.

ประสบการณ์:

4 ปีขึ้นไป

ทักษะ:

Negotiation, Leadership Skill, Teamwork, English

ประเภทงาน:

งานประจำ

• Provide first-level technical support for blow molding equipment, including diagnosing, reproducing, and resolving issues in a timely manner.
• Manage customer service tickets end-to-end, including documentation, tracking, prioritization, and escalation.
• Act as the primary liaison for customer technical inquiries, delivering support via remote channels and onsite when required.
• Support and coach service engineers through technical guidance, troubleshooting, and onsite assistance for complex cases.
• Recommend effective technical solutions and preventive measures based on issue analysis and recurring trends.
• Coordinate and communicate across internal functions (Support, Sales, Engineering, Product Management, Consulting) and external stakeholders.
• Manage warranty and claim-related cases, ensuring proper documentation and follow-up.
• Track service activities, maintain accurate records, and prepare timely performance reports.
• Identify and implement tools or improvements to enhance service efficiency and quality.
• Drive continuous improvement through process optimization and service excellence initiatives.
• Transfer knowledge to engineers and internal teams, including coaching, auditing, and competency development.
• Support training initiatives as Customer and Service Trainer within internal Academy programs.
• Your Profile You contribute.
• Bachelor's Degree in Engineering or a related technical field.
• 4-7 years of experience as a Service Engineer, preferably in beverage line processes or blow moulding systems.
• Proven experience in customer management and technical support within an industrial or manufacturing environment.
• Strong technical troubleshooting, diagnostic, and problem-solving skills.
• Proficient in English (spoken and written).
• Strong customer orientation with the ability to manage and resolve client issues effectively.
• Excellent communication, interpersonal, and negotiation skills.
• Demonstrated leadership and coaching capabilities to support engineer development.
• High level of teamwork and ability to collaborate across functions, departments, and business units.
• Strong time management, organizational, and coordination skills.
• High learning aptitude with the ability to quickly adapt to new technologies and processes.
• Structured and analytical problem-solving competence.
• Willingness and ability to travel frequently (approximately 60% of total working time annually, excluding leave).
• Ability to work in a dynamic, customer-facing environment with both onsite and remote support responsibilities.
• Regular interaction with internal stakeholders across teams, departments, and business units, as well as external customers and suppliers.
• Comfortable with an instructional and consultative communication style, including coaching, training, and technical guidance.
• Your application Interested? Apply online now!.
• Have we sparked your interest? Then send us your application! You can expect exciting challenges that provide real impetus, in a team that motivates and supports you at the same time - and framework conditions that are not only attractive but also adapt to your life.
• To get us talking quickly, simply send us your application via our online form - it takes less than 5 minutes!.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

CAD

ประเภทงาน:

งานประจำ

• Develop 3D CAD models and 2D detailed manufacturing drawings for automotive plastic injection molds.
• Design mold structures, parting surfaces, and mold base configurations.
• Engineer functional mold mechanisms, including sliders, angular lifters, and ejector systems.
• Optimize cooling channels and runner/gate layouts for maximum molding efficiency.
• Collaborate with manufacturing teams to verify tooling feasibility, tolerance specifications, and production timelines.
• Bachelor's Degree in Engineering or a related field.
• At least 5 year of professional experience in the field.
• Experience in designing automotive injection molds.
• Experience in designing automotive injection molds.
• Experience with medium-to-large-sized molds(450ton ~ 1300 ton).
• Experience n using NX and Auto CAD.
• Experience in designing Sliders / Lifters / Ejector Systems / Cooling Systems.
• Languages.
• Thai: Native (required).
• English: Intermediate (required) Please attach an English proficiency certificate (e.g., TOEIC, IELTS, TOEFL, or equivalent) along with your resume/application.
• Korean: Basic (optional).
• Working Conditions.
• Location: work at office in South Korea.
• Working Days: 5 days per week (Monday - Friday).
• Working Hours: 8 hours per day.
• Additional Benefits.
• Dormitory and meal provided.
• Support visa sponsorship.
• Please note: All work experience and graduation dates in your resume should be written in month and year format (e.g., May 2022 - March 2024).
• KOTRA Bangkok is currently recruiting staff to work for HANYANG M-TECH.
• Note: The Korea Trade-Investment Promotion Agency (KOTRA), a government agency of South Korea, supports global talent by providing opportunities to work with Korean companies. We offer a one-stop service, including the arrangement of online interviews between applicants and employers.
• KOTRA BANGKOK].
• Ms. Kamonwan V.
• Units 4101-4104, 41st Floor, Bhiraj Tower at EmQuartier,.
• 689 Sukhumvit Road, North Klongton Subdistrict,.
• Vadhana District, Bangkok 10110.
• Only shortlisted candidates will be notified.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Negotiation, Purchasing, Energetic, ISO 14001, English

ประเภทงาน:

งานประจำ

• Develop & implement cost effective standards for tooling with procedure.
• Lead manage the new mold / current mold of all molding function with integrate with FMEA.
• Demonstrate shopfloor mold breakdown, mold defect for APU Escalation with FTA and improve plan.
• To cooperation with the HQ Tooling standardization with apply to IIT Molding.
• Lead QRQC analysis to identify root cause(s), PDCA-FTA and formalize LLCs with APU/Customer.
• Ensure tooling are properly used in production and die maintenance; propose improvements.
• Ensure spare parts before SOP Mold, Machining workshop available and stock management.
• Propose improvements to the product group tooling standards.
• Ensure that LLCs are implemented for new tooling design.
• Ensure tooling commissioning process when receiving new dies / molds.
• Anticipate new equipment set-up that are necessary to maintain / improve day to day operations (CNC, EDM, welding, 3D.).
• Ensure that any new employee of the perimeter follows an Induction process.
• Proactive focus on safety, wellbeing and 5S enhancements, takes responsibility.
• Passionate about service excellence, delivering quality and solving problems.
• Respected team player, supports and develops others, embraces change, has fun.
• Continuously improves (cost control, processes, efficiency, new ideas), data driven.
• Self-motivated, 'can-do' attitude, energetic, flexible, adaptable, responsible, accountable.
• Lead daily, weekly, monthly meeting and organize delegation rules and people development.
• Conduct annual appraisals, salary review, career interviews, succession planning & give feedback.
• Required prepare, or otherwise manage and report on operating expenses and capital expenditure ensuring budget constraints are maintained or reduced.
• Lead Mold QRQC Maintenance activity program deployment on the dies/molds.
• Lead cooperation with APU QRQC on 10.10am to finding problem and how to action.
• Lead invite with APU in SSI Activity to improve defect for molding (Scratch/Dent/Gas/Temp/Oil).
• Lead and deploy 5S methodology in Die Maintenance department.
• Ensure Continuous Improvement activities to apply Valeo 5 Axes.
• Perform regular benchmark to other Valeo plants or suppliers to detect and apply good practices / new technologies.
• Ensure that safety rules for maintenance activities are defined, consistent and applied (such as LOTO procedure).
• Manage maintenance supervisors.
• Manage age pyramid in order to be able to organize on time the competence transfer towards successors.
• Manage training plan for his team, including technical skills, using magic square. Ensures that his team is trained to QRQC: Line QRQC, Maintenance 5 WHYs, PDCA/FTA. Builds trainings program to educate Direct Labour to maintenance basics.
• Performs ERIM OJTs with shopfloor activity with production.
• Participate actively to ERIM deployment with production teams.
• Manage a global equipment reliability action plan.
• Optimize maintenance costs during corrective and preventive maintenance activities Implement Maintenance QRQC red box & Maintenance dpt visual key indicators Manage of co-manage with the APU Manager the Maintenance QRQC.
• Detect refurbishing/renewal needs and builds and follows potential necessary action plan Lead the delegation of preventive maintenance level 1 & 2 towards production teams; Ensures that Direct Labour is properly trained and that OJT is in place.
• Ensure Preventive Maintenance is organized and done according to need, with planification and communication to production teams (MPS).
• Participate actively to the Mother Daughter link concerning the maintenance field.
• Lead kaizen actions to improve in maintenance field, such as: accessibility to organs Manage a productivity action plan (spare parts, energy).
• Manage VPS workshops (TPM, 5S) and participate to stop scrap activity.
• Propose to plant manager and manage maintenance budget.
• Each manager is empowered to contribute to reduce risks to prevent incidents and ergonomics issues into the.
• Propose and drive maintenance strategy.
• Implement communication flow with equipment development teams to get taken into account maintenance lessons learns (kaizen card) = Back to design flow.
• Make sure that maintenance is contributing to new equipment launches and participate to Lean Process Design.
• Ensure that rules concerning equipment manufacturer assistance onsite/at distance are involved in specifications and contract negotiated by Purchase department.
• Participate to maintenance contract negotiation with purchasing department.
• Participate to the definition of standard parts to be requested in Site General Specifications for new equipments.
• Use experience & methodology (ERIM, TPM, ) to propose improvements on new machines & associated equipments.
• Degree of engineering Mechanical, Plastic Molding.
• Possess IATF 16949, ISO 14001, ISO 45001 and IKS Standard knowledge.
• Master or MBA degree in engineering fields.
• 10 years experience in Plastic tooling design & maintenance (Automotive).
• 10 years Strong experience in Moulding and Maintenance process to perform of automotive Manufacturing.
• At least 5 years in industrial or process or maintenance activities.
• Highly knowledge / Knowhow of structure mold Housing / Lens of Lighting (New/current design).
• Management experience to lead the Die Maintenance department and develop team autonomy.
• Have knowledge Equipment process preventive maintenance and MTBF MTTR, TPM and QRQC.
• Good English communication skills.

ทักษะ:

Negotiation, ISO 14001, Assembly, English

ประเภทงาน:

งานประจำ

• Ensure complete process and product release of new components bought from external suppliers in cooperation with the supplier and development team (Project Buyer, Project Manager, Project Launch Manager, R&D, Quality, Manufacturing, Logistics, etc.).
• Lead the application of Advanced Product Quality Planning (APQP) methodology by performing supplier APQP reviews, process audits/line reviews, and supplier capacity checks.
• Assure the safe launch execution.
• Actively participate in the DMSP (Sourcing Process).
• Support R&D, Project Buyers, and the Development Team in the supplier selection of new components from external suppliers during all sourcing phases.
• Ensure supply risk analysis evaluation in the early project phase, by the latest stage of the tender list definition, using the E-Sourcing tool.
• Participate in technical analyses and validate supplier solutions in terms of quality, technical/process solutions, capability, and timing, in line with the project team.
• Ensure lessons learned are applied through feasibility commitment and technical analysis approval.
• Ensure the implementation of commodity state-of-the-art and best-in-class standards/practice requirements in supplier processes through the application of the Commodity Quality Check List.
• Ensure the transmission and implementation of customer-specific requirements.
• Ensure the implementation of special characteristics and apply the appropriate control methodology.
• Validate the Supplier APQP Review conducted by or with the suppliers.
• Follow up on planning, execution, and completion of all tasks required for the Production Part Approval Process (PPAP) evaluation and approval.
• Make decisions, solve problems autonomously, and escalate appropriately to upper management of the supplier and/or company.
• Work across a global, matrixed organization, sharing and learning best practices.
• Participate in relevant technical meetings with R&D and suppliers.
• Support any APQP reporting requested at plant, division, or company for the components managed by SDE.
• Validate the supplier action plan at project level and ensure its availability on the APQP database.
• Apply the APQP CQCL.
• Measure the effectiveness of the APQP process through reverse APQP process analysis, based on claims occurring before G7.
• Support the change management process and promote second sourcing.
• Experience in supplier new project development related to injection molding, stamping, welding, and assembly processes.
• Fluent in English, with a TOEIC score of 700 or higher.
• Strong analytical and synthesis skills, with the ability to propose solutions, take responsibility, work under pressure, and manage supplier relationships.
• Effective negotiation and persuasion abilities, with experience in managing meetings and fostering a team spirit.
• Comprehensive knowledge and experience in new component development, including supplier selection, requirement definition, Advance Product Quality Planning, verification of production capacity, validation of Initial Samples Control Reports, and the Production Part Approval Process.
• Experience in process auditing (qualified auditor according to VDA 6.3 is mandatory).
• Knowledge and practical experience with quality tools such as Failure Mode and Effect Analysis, Statistical Process Control, process capabilities, Pareto analysis, and problem-solving methods (such as 8D, 5 Whys, Ishikawa, Fault Tree Analysis, and experience capitalization).
• Familiarity with quality norms such as IATF 16949, and knowledge of quality, environmental (ISO 14001), and safety requirements (ISO 45001).
• Proficient in MS Office Suite.
• Willingness to travel (30-50%).

ทักษะ:

Industrial Engineering, Data Analysis, Negotiation, Procurement, Leadership Skill

ประเภทงาน:

งานประจำ

The Supplier Development Analyst leads supplier development programs and manages the onboarding, qualification, and performance of new suppliers. The role works closely with cross-functional teams to drive improvements in quality, cost, delivery, and sustainability. It also ensures alignment with company standards by leveraging quality systems, data analysis, and continuous improvement methodologies. Job Requirements Supplier Development & Improvement Lead cross-functional teams to develop and improve supplier capabilities, ensuring alignment with TE's strategic goals in quality, c ...

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Assembly

ประเภทงาน:

งานประจำ

• This role.
• is responsible for driving cost competitiveness, process efficiency and BOM competitiveness across NXP's assembly operations. This role leads strategic initiatives to achieve breakthrough cost reductions, enhance manufacturing efficiency, and enable next-generation package architectures in close collaboration with suppliers, material innovation and Business Lines (BL).
• Job Responsibility.
• Package Cost Transformation Leadership.
• Low-cost Bill of Materials (BOM) optimization.
• Assembly process cost reduction and automation.
• Lead QFN cost transformation programs, focusing on design-to-cost and manufacturability.
• Operation Process Innovation.
• Lead development and implementation of super wide leadframe / high-density packaging solutions.
• Champion innovations in molding process efficiency, mold cleaning cost reductions.
• People Management and Program Management.
• Coaching and Engineer technical compe6.tency improvements.
• Program Management in a matrix organization.
• Strategic Supplier Engagement.
• Co-develop innovative, cost-effective BOM, 2nd source, alternative BOM.
• Accelerate adoption of new materials and process technologies.
• Business Line (BL) & Stakeholder Management.
• Lead cross-functional engagement with BLs on BOM changes and PCN success rate.
• Change Management & Governance.
• Establish structured governance for cost and technology change programs.
• Ensure robust risk assessment, qualification, and validation processes.
• Drive data-driven decision-making and transparency across stakeholders.
• Job Qualification.
• Bachelor's or Master's degree in Electronics, Electrical, Mechanical, Materials Engineering, or a related field.
• 10-18+ years in semiconductor assembly / packaging engineering.
• Cost reduction and value engineering programs.
• QFN back end, in strip solutions and leadframe-based package technologies.
• Strong track record in Driving cross-site or global initiatives & Supplier collaboration and negotiation.
• Technical Expertise.
• Deep knowledge of Assembly processes especially Back end Leadframe design and high-density packaging.
• Cost modeling (BOM + process cost structures).
• Experience in Molding process optimization.
• Familiarity with PCN processes, JEDEC standards, and qualification flows.
• Leadership & Competencies.
• Strategic thinker with strong cost engineering mindset.
• Influential leader capable of driving alignment across BLs and suppliers.
• Strong analytical and problem-solving capability.
• Proven ability to lead change in complex, matrix organizations.
• Excellent communication skills with executive-level stakeholder management.
• More information about NXP in Thailand.
• LI-6a60.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Quality Management System, Chemical Engineering, Product Development, Quality Assurance, Microsoft Office, Problem Solving, ISO 9001, SAP, English

ประเภทงาน:

งานประจำ

• Drive quality throughout the product development lifecycle and manufacturing process.
• Define product defects, AQLs, and quality acceptance criteria for FAT, TSLT, PPV, and PLQ.
• Develop Quality Control Plans and lead PFMEA, process validation, and Cpk studies for new products and manufacturing processes.
• Partner with cross-functional teams to support design reviews and successful new product launches.
• Lead supplier qualification audits and evaluate manufacturing capabilities to ensure compliance with SCJ quality standards.
• Lead component qualification activities for new mold development and product commercialization.
• Apply statistical and quality engineering tools to improve product quality, process capability, and operational performance.
• Provide technical guidance, deliver quality training, and communicate SCJ quality requirements across External Manufacturing partners.
• Identify and implement opportunities to improve supplier quality, manufacturing performance, and productivity.
• Ensure compliance with SCJ Safety, Health & Environment (SHE) policies and standards in all activities.
• POSITION.
• Bachelor's degree in Science, Chemical Engineering, or a related field.
• 2-3 years of experience in Quality Assurance, Quality Engineering, or a related manufacturing environment.
• Working knowledge of quality management systems, QC tools, and ISO standards.
• Strong analytical, problem-solving, and continuous improvement skills.
• Ability to monitor quality performance and drive improvement initiatives.
• Excellent communication and interpersonal skills with the ability to collaborate effectively across manufacturing, suppliers, and cross-functional teams.
• Self-motivated, well-organized, independent, and capable of managing multiple priorities.
• Ability to lead quality projects independently and provide technical guidance to team members.
• Hands-on experience with quality engineering tools, including FMEA, Control Plan, SPC, AQL, Sampling Plans, Capability Studies, Problem Solving, DOE, Gage R&R, and Supplier Quality Audits.
• Proficient in Microsoft Office applications; SAP experience is an advantage.
• Good command of spoken and written English.
• Valid driver's license and willingness to travel as required.
• Experience in Quality Management System (QMS) auditing, preferably ISO 9001.
• Relevant engineering experience in a manufacturing environment.
• Experience in Quality Assurance or Quality Engineering.
• Good command of spoken and written English.
• Demonstrates a high level of integrity and professionalism.
• Excellent verbal and written communication skills across multiple communication channels.
• Strong commitment to complying with SCJ Safety, Health & Environment (SHE) policies and regulations.
• Valid driver's license and willingness to travel as required.
• Ability to work effectively under pressure and meet challenging deadlines.
• Quality system auditing experience: ISO 9001:2000, GPM.
• Relevant engineering experience.
• Good command in spoken and written English.
• Ability to drive and have personnel car license.
• Inclusion & Diversity.
• We're a global business, with people from every culture, ethnicity, race, religion, gender identity, sexual orientation, age and ability. We recognize the breadth of human experience, and we work to celebrate it. It is our goal to build a diverse, inclusive and supportive work environment where all people can thrive.
• We're committed to ongoing efforts that help us attract, hire, and retain diverse talent who want to build a positive, inclusive environment. Read more about our ongoing initiatives at https://jobs.scjohnson.com/inclusion.
• Not ready to apply? Sign up for Job Alerts.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Product Development, Project Management, Microsoft Office, Product Design, Electronics

ประเภทงาน:

งานประจำ

• Investigate and collect future technological trends and needs.
• Initiate new ideas for new products or new product solution.
• Translate new product idea into pilot sample (compounding samples).
• Co-ordinate with Adlab to confirm that compound meet target customers' requirements.
• Conduct trial for pilot samples and identify potential new product solution.
• Co-ordinate the development and introduction of new grades, participate in customer trials and give technical support to the customer, feedback trial results to all concerned parties in time.
• Product quality maintenance and improvement.
• Be a strong advocate of quality and actively initiate/ support the improvement of product quality and service quality.
• Be focal point to co-ordinate customer voice, enquiry with internal support functions.
• Technical service.
• Ensures timely and effective technical support to customers for full satisfaction of using our products.
• Resolves problems in application.
• Attends on site trials of our products at customer's plant, assists customer in optimizing processing conditions.
• Co-ordinates with technical staff in other locations.
• Provide technical knowledge training regarding products and application to customers where necessary or appropriate.
• Complaint handling.
• Investigates product and application related complaints from customers, suggests settlement on technical issues. Ensure that the customer is satisfied with handling of the complaint.
• Sample management.
• Arrange samples to customers for market development, in cost efficient way and follow up sample trial results at customers.
• Product Stewardship and Intellectual properties.
• Protect the company intellectual properties via confidential agreement and non-analysis agreement where appropriate.
• ISO compliance.
• Maintain the document system related to new product design to comply with ISO requirements.
• Additional Technical Skills / Experience.
• Strong experience in polypropylene (PP) processing or application development, particularly in technical compounding for the electrical & electronics (E&E), automotive, wire & cable, and related industries.
• Experience in testing and analyzing polypropylene molded parts for automotive applications is preferred.
• Experience in PP product design and project management for automotive and compounding applications.
• Experience in polymer processing or application development for healthcare applications is preferred.
• Bachelor's Degree or higher in Polymer Science/Engineering.
• Minimum 2 years of technical experience in polymer processing is preferred.
• Proficient in Microsoft Office applications (Excel, Word, and PowerPoint); experience with Statistical techniques is preferred.
• Strong analytical, problem-solving and customer service skills with a collaborative mindset.
• Good communication, teamwork and interpersonal skills.
• Proficiency in English communications.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Production planning, Data Analysis, Leadership Skill, Assembly

ประเภทงาน:

งานประจำ

• Supervising Staff: Guide, coach, and oversee all assembly technicians and operators across Front of Line (FOL) and End of Line (EOL) production.
• Scheduling: Create and manage work schedules and shift rotations to ensure optimal line coverage and consistently meet production deadlines.
• Hiring and Training: Participate in recruiting new Line Technicians (LT) and Operators (OP); conduct comprehensive training on technical job duties, safety protocols, and company procedures.
• Conflict Resolution: Address and resolve interpersonal issues and disputes among manufacturing personnel promptly to prevent lost productivity.
• Performance Management: Monitor employee performance, provide constructive feedback, and align individual goals with STEP (Target and Behavior) expectations.
• Production and quality control.
• Scheduling and Planning: Collaborate with Line Control (LC) to develop and implement daily, weekly, and monthly production plans, ensuring alignment of the loading plan and materials.
• Monitoring Workflow: Track the end-to-end manufacturing process specifically monitoring FOL (Die Attach, Wire Bond) and EOL (Molding, Trim & Form, Plating) stages to maintain high efficiency, eliminate bottlenecks, and ensure strict quality standards.
• Process Improvement: Analyze production metrics and data to implement continuous improvement strategies aimed at reducing waste, optimizing throughput, and boosting productivity.
• Inventory Management: Oversee inventory levels for F1 and GK materials, coordinating closely with the Logistics (LOG) team to prevent material shortages and line stoppages.
• Safety and maintenance.
• Enforcing Safety: Ensure strict compliance with all company and regulatory safety guidelines to maintain a zero-accident work environment.
• Conducting Inspections: Regularly inspect manufacturing machinery and specialized assembly equipment across FOL and EOL zones to proactively identify maintenance needs.
• Arranging Repairs: Coordinate with the maintenance department to schedule routine servicing and rapid repairs for faulty or unreliable equipment.
• Accident Investigation: Lead investigations into any workplace incidents, identify root causes, and implement corrective actions to prevent recurrence.
• Reporting and communication.
• Data Analysis: Compile, track, and analyze key performance data and production records to evaluate progress against target KPIs.
• Reporting to Management: Prepare and present comprehensive performance, efficiency, and progress reports to senior management.
• Interdepartmental Coordination: Act as the primary liaison to communicate and collaborate with cross-functional teams, including Quality Control (QC), Maintenance, and Logistics (LOG).
• Bachelor's degree in Engineering, Manufacturing, Operations Management, or a related field (minimum requirement).
• At least 3-5 years of experience in manufacturing or operations, with supervisory or team leadership responsibility.
• Experience managing teams of operators or semi-skilled workers in a production environment.
• Strong understanding of manufacturing processes, production planning, and safety standards.
• Proven leadership, communication, and team management skills.
• Ability to solve problems and make decisions based on policies and operational guidelines.
• Experience in training, coaching, and developing team members.
• Ability to work effectively in a fast-paced, target-driven environment.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Good Communication Skills, Electrical Engineering, Project Management, Data Analysis, Electronics

ประเภทงาน:

งานประจำ

• Lead New Product Introduction (NPI) projects from customer design release through mass production.
• Coordinate cross-functional teams including Process Engineering, Manufacturing, Quality, Test Engineering, Supply Chain, and Customers.
• Manage project schedules, engineering builds, qualification activities, and production ramp-up.
• Analyze production yield, defect trends, and reliability data to identify improvement opportunities.
• Drive Root Cause Analysis (RCA) and corrective/preventive actions for quality and manufacturing issues.
• Support package development, assembly process qualification, and change management activities.
• Interface directly with customers regarding technical issues, project status, and product releases.
• Review engineering specifications, process flow, FMEA, Control Plan, and qualification reports.
• Monitor product performance, reliability, and SPC data.
• Ensure compliance with automotive and semiconductor quality standards, including IATF 16949, JEDEC, and IPC, where applicable.
• Bachelor's or Master's Degree in: Electrical Engineering, Electronics Engineering, Materials Engineering, Mechanical, Industrial, Semiconductor Engineering, Physics or related fields.
• 2-8+ years of experience in one or more of the following: Semiconductor Assembly / IC Packaging, Product Engineering, NPI Engineering, Manufacturing Engineering, Yield Engineering, Test Engineering, NPI Project Management.
• Technical Skills Experience or knowledge in semiconductor assembly processes such as: Wafer Saw, Die Attach, Wire Bond, Flip Chip, Mold, Trim & Form, Singulation, Final Test.
• Knowledge of IC packaging technologies such as: QFN, BGA, LGA, FCBGA, SiP.
• Additional technical knowledge: Yield Analysis and SPC, Root Cause Analysis (RCA), 8D / 5 Why / Fishbone, FMEA / Control Plan / MSA, Data analysis using JMP, Minitab, Excel, Power BI, or SQL, Reliability and qualification activities, JEDEC standards, HAST / HTOL / Temperature Cycling / MSL.
• Preferred.
• Experience in SiP or advanced semiconductor packaging is highly preferred.
• Experience with automotive semiconductor products is an advantage.
• Knowledge of APQP, PPAP, and IATF 16949.
• Six Sigma Green Belt / Black Belt certification is a plus.
• PMP certification is a plus.
• Experience working with multinational semiconductor companies or OSATs is preferred.
• Soft Skills.
• Strong project management and coordination skills.
• Strong analytical and problem-solving skills.
• Good communication skills with customers and global teams.
• Strong leadership and stakeholder management skills.
• Able to work effectively in a fast-paced semiconductor manufacturing environment.
• Good presentation and technical report-writing skills.
• Language.
• Good command of Thai and English, with the ability to communicate effectively with global customers and regional engineering teams.
• You will play a.
• key role.
• in driving new product launches, technical integration, qualification, yield improvement, and production ramp-up while working closely with customers and cross-functional engineering teams.
• Daily transportation allowance of 30 Baht.
• Guaranteed bonus for 2 months.
• Performance-based bonus on a quarterly basis.
• Monday to Friday work schedule.
• Starting annual leave of 13 days.
• Language allowance (TOEIC).
• Social security.
• Group Insurance.
• Working location: Sukhumvit 105 (Soi Lasalle), Bangna, Bangkok (BTS - Bearing).
• Semiconductor.

ทักษะ:

Business Development, Chemical Engineering, Japanese, English, Korean

ประเภทงาน:

งานประจำ

What we offer Explore a world of opportunities with us. Look ahead with us and help shape innovative solutions to make our world more sustainable and life healthier, more vibrant and more comfortable. At Evonik, you have the chance to explore, thrive, and grow alongside 33,000 colleagues. Among attractive career paths and high-quality development programs, we not only offer performance-based remuneration and occupational health benefits but also hybrid and flexible working environments with Bring your fresh perspective, develop your strengths, break out your mold, and find a career ...

ทักษะ:

Product Development, Project Management

ประเภทงาน:

งานประจำ

• Work with commercial team for Customer Engagement program (CEP) and maintain good relationship with customers.
• Work with sales and marketing team (Global and Regional) for assigned project.
• Support Rapid Value Innovation (RVI), project of cost innovation and new product development (Aptar stock item).
• Coordinate with sales and finance team on feasibility study of assigned new inquiry (custom development), stock localization and NPD projects.
• Lead and work with customer on Front End Innovation Projects.
• Lead innovation ideas for new product / process/Wing of Change (WOC) and work with RTC team to deliver new product concept/design.
• Lead and support internal team for workflow process implementation.
• Coordinate with internal technical team such as Regional Technical Center (RTC), Technical Domain Expert (TDE), Technology Process Community (TPC) to meet Aptar process standard and customer expectation.
• Project ownership and lead multiple projects from Kick-Off-Meeting to a free from defects delivery to internal and external customers.
• About you.
• Bachelor or Master degree or equivalent with a technical background in plastic engineering, packaging engineering, mechanical engineering, packaging development or product development.
• Minimum 5 years' progressive experience in product development, packaging development and project management.
• Familiarity with product development, project execution, new product launch/relaunch, localization of new product, and methodologies of project management.
• Understand molding principle.
• Good leadership and time management skills with appropriate sense of urgency.
• Ability to multi-task and manage multiple projects on an ongoing basis.
• Ability to cost negotiate and understanding of cost drivers, margin and landing factors.
• Good problem solving and analytical abilities to grasp the key points from complicated details.
• Good written and verbal communication skills in English.
• Proficient with MS Office applications including MS Project.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Project Management, Procurement, Automation

ประเภทงาน:

งานประจำ

• Contribute to and implement sourcing strategies on assigned commodities with regional commodity leads.
• Collaborate with team members (global Sourcing team, Engineering, Operations, Business Units, Quality, etc.) in accomplishing these strategies.
• Participate and support Global Commodity Leads in managing global commodities.
• Source and qualify new suppliers especially in Best-Cost-Country (BCC) following Rockwell commodities strategy.
• Promote improvements in quality, delivery and cost to meet SSO and business targets and projects.
• Remain current on design, product and market requirements from Business Units and in turn share market and suppliers' developments.
• Supplier Management and Development.
• Assess suppliers' technical competencies and capabilities - match suppliers' strength to Rockwell technical & quality requirements and influence BU/Engineering on suppliers' selection.
• Understand and establish supply chain requirements e.g. production vs delivery lotsize, production vs delivery leadtime, etc) with suppliers to meet Rockwell operational requirements.
• Develop supplier development programs (e.g. leadtime reduction, process improvement).
• Support Value-Engineering-Value-Analysis (VAVE) projects - engage suppliers and BU/Engineering to collaborate on cost/design improvements.
• Track and implement action plans to continuously improve Strategic Sourcing Key Performance Indicators (KPI) and support manufacturing locations regionally and globally.
• Participate with Commodity Leads in business reviews with strategic and critical suppliers involving relevant stakeholders.
• Attract, Develop, and Retain Talent.
• Review and explore development opportunities.
• Facilitate information sharing to global commodity team and relevant stakeholders to enhance collaboration and adoption of best-practices.
• Continuous Improvements.
• Continually review supply base ; source & develop new and potential suppliers specifically in BCC to support the business requirements.
• Facilitate Kaizen events (e.g. sourcing workshops) to build the savings funnel to achieve year-on-year savings target.
• Identify strategic sourcing best practices and lead these best practices into the Rockwell strategic sourcing toolkit and sourcing strategies.
• Familiarity with Company Policies and Procedures.
• Applies policies and procedures in compliance with government laws.
• Policies and procedures include, but not limited to: Standards of Business Conduct, Intellectual Property, Control Environment, Information Protection, ISO 9000 & 14000, government regulations (e.g. health, safety, quality and environmental), and functional policies published on the Rockwell Automation information network.
• Have Engineering degree(Mechnaical) or technical background.
• Broad knowledge and exposure in managing direct material commodities (e.g. machined parts, injection molding, cable assemblies, bus bar).
• Have well-rounded knowledge in strategic sourcing, supply chain, manufacturing and operational procurement.
• Exposure in high-mix low-volume (HMLV) environment preferred.
• Proved track record as a competent technical interface in engaging suppliers and Engineering.
• Experience in project management required.
• Experience managing the sourcing preferably in both multi-site management responsibility and multi-commodity responsibility.
• Travel: up to 50% (domestic ional/ international).
• Minimum of 5 years of progressive sourcing responsibilities with exposure across multiple commodities and regions.
• Regional sourcing experience in Asia Pacific.
• Knowledge of the marketplace conditions for a broad range of commodities including technology trend, supply and demand dynamics, supplier analysis, pricing and development including bench-marking.
• Good experience collaborating with cross-functional teams (Sourcing, Engineering, Operations, Quality teams).
• Appreciate cultural sensitivity to manage relationships across global boundaries and time zones.
• Understand and appreciate internal and external customers.
• Our benefits package includes.
• Comprehensive mindfulness programs with a premium membership to Calm.
• Volunteer Paid Time off available after 6 months of employment for eligible employees.
• Company volunteer and donation matching program - Your volunteer hours or personal cash donations to an eligible charity can be matched with a charitable donation.
• Employee Assistance Program.
• Personalized wellbeing programs through our OnTrack program.
• On-demand digital course library for professional development. and other local benefits!.
• _At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the.
• job description, we encourage you to apply anyway. You may be just the right person for this or other roles._.
• LI-Hybdrid.
• LI-NB1.
• Rockwell Automation's hybrid policy aligns that employees are expected to work at a Rockwell location at least Mondays, Tuesdays, and Thursdays unless they have a business obligation out of the office.

ทักษะ:

Mechanical Engineering, ISO 9001

ประเภทงาน:

งานประจำ

• Maintain, resolve, and develop for mold manufacturing process & Machine & Equipment to produce conformity products.
• Implementing lean tools to improve flow, process and lead time.
• Ensure daily launch, yield, mold quality and EER of critical machine through implementation and respect of process.
• Provide training activity, SOP & work instruction to advise worker work efficiently.
• Have to know & understand the company procedure and policies and also to cooperate with company in audit activities such as ISO 9001,ISO13485, ISO14001, ISO45001 etc. moreover to attend the compulsory training course i.e. Orientation Program, Safety Officer Training,EPS etc.
• Supervision of the control of the process.
• Analyze by use statistical technique to optimum process condition.
• Resolve & develop for all mold manufacturing process.
• Plan the machine, equipment and tool need according to production volume increment.
• Provide training, activity, work standard & work circumstance to advise worker work efficiently.
• Responsible for implementation of safety policy and procedures in their area of work, and with their subordinated (When applicable).
• Develop and improve process for more advanced applications.
• Transfer process from headquarters or other facilities.
• Identification, Monitoring and solution of process related problems.
• Responsible for implementation of company policies and procedures in their area of work, and with their subordinates (When applicable).
• Bachelor Degree in Industrial / Mechanical Engineering.
• Experience in Process Engineer in 2-5 years up.
• Technical knowledge on.
• Statistical Process Control.
• Engineering drawing.
• CNC operation knowledge.
• Mold Manufacturing Module A & B.
• 6S & Visual Management.
• OEE and TPM.
• Lean Six Sigma and Kaizen.
• Finance for Non Finance.
• Customer focus.
• Action and goal oriented.
• Ethics, Honesty and trustworthy.
• Dealing with ambiguity.
• Communicating Effectively.
• Innovation management.
• Building team spirit, and Motivation others.
• Managing and measuring work.
• Basic Knowledge & Understanding in field ISO9001, ISO13485, ISO14001, ISO45001.
• This posting is for an existing vacancy within our business. Employee pay is determined by multiple factors, including geography, experience, qualifications, skills and local minimum wage requirements. In addition, you may also be offered a competitive bonus and/or commission plan, which complements a first-class total rewards package. Benefits may include health care, retirement savings, paid time off/vacation, and various employee discounts.
• [email protected].
• We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, national origin, social origin, social condition, being perceived as a victim of domestic violence, sexual aggression or stalking, religion, age, disability, sexual orientation, gender identity or expression, citizenship, ancestry, veteran or military status, marital status, pregnancy (including unlawful discrimination on the basis of a legally protected pregnancy or maternity leave), genetic information or any other characteristics protected by law. Native Americans in the US receive preference in accordance with Tribal Law.

ทักษะ:

Product Development, Packaging Design, Cost Analysis

ประเภทงาน:

งานประจำ

• วางแผนและบริหารโครงการพัฒนาผลิตภัณฑ์ใหม่ให้เป็นไปตาม Timeline และงบประมาณ.
• ประสานงานระหว่าง R&D ฝ่ายขาย ลูกค้า ฝ่ายผลิต และฝ่ายคุณภาพ.
• ติดตามความคืบหน้าของแต่ละโครงการ พร้อมรายงานสถานะและความเสี่ยง.
• พัฒนาผลิตภัณฑ์และนวัตกรรม.
• ร่วมออกแบบและพัฒนาผลิตภัณฑ์ใหม่ร่วมกับทีม R&D.
• ศึกษาและทดลองใช้วัตถุดิบใหม่ (เช่น PP, rPP, Bio-based Material, Additives และวัสดุใหม่อื่น ๆ).
• ทดลองแนวคิดใหม่ด้าน Packaging Design และ Functional Design.
• ศึกษาเทคโนโลยีและแนวโน้มของอุตสาหกรรมบรรจุภัณฑ์เพื่อนำมาประยุกต์ใช้.
• การทดลองและพัฒนากระบวนการผลิต.
• วางแผนและดำเนินการ Trial ทั้งระดับห้องทดลองและระดับการผลิตจริง.
• วิเคราะห์ผลการทดลอง พร้อมจัดทำรายงานและข้อเสนอแนะ.
• แก้ไขปัญหาที่เกิดขึ้นระหว่างการทดลองและการผลิต.
• สนับสนุนการขึ้นผลิตภัณฑ์ใหม่จนสามารถผลิตได้อย่างมีเสถียรภาพ.
• Process Improvement.
• วิเคราะห์กระบวนการผลิตเพื่อเพิ่ม Productivity.
• ลด Cycle Time.
• ลดของเสีย (Scrap).
• เพิ่ม Yield.
• ลดต้นทุนการผลิต.
• นำแนวคิด Lean Manufacturing หรือ Continuous Improvement มาประยุกต์ใช้.
• การทดสอบและการรับรองผลิตภัณฑ์.
• วางแผนการทดสอบผลิตภัณฑ์ทั้งด้านคุณสมบัติทางกายภาพและการใช้งาน.
• ประสานงานการทดสอบกับทีม RD & Production.
• จัดทำรายงานผลการทดลองและสรุปข้อมูลทางเทคนิค.
• การบริหารโครงการและเอกสาร.
• จัดทำ Project Timeline.
• ติดตาม Milestone.
• จัดทำ Cost Analysis.
• จัดทำ Technical Report.
• จัดทำ Design Review และ Lesson Learned ของแต่ละโครงการ.
• สนับสนุนการสร้างนวัตกรรมขององค์กร.
• ค้นหาแนวโน้มด้านวัสดุ เทคโนโลยี และบรรจุภัณฑ์ใหม่.
• ประสานงานกับ Supplier และพันธมิตรด้านเทคโนโลยี.
• สนับสนุนการยื่นจดสิทธิบัตรหรือการคุ้มครองทรัพย์สินทางปัญญา (หากมี).
• ปริญญาตรีหรือโท สาขาวิศวกรรมพอลิเมอร์ วิศวกรรมเคมี วิศวกรรมอุตสาหการ วิศวกรรมเครื่องกล วิทยาศาสตร์พอลิเมอร์ หรือสาขาที่เกี่ยวข้อง.
• มีประสบการณ์ 3-8 ปี ด้าน Product Development, Project Engineering, Process Engineering หรือ R&D ในอุตสาหกรรมพลาสติกหรือบรรจุภัณฑ์.
• หากมีประสบการณ์ด้าน Injection Molding จะได้รับการพิจารณาเป็นพิเศษ.
• มีประสบการณ์ในการบริหารโครงการพัฒนาผลิตภัณฑ์ใหม่ (NPD).
• สามารถวิเคราะห์ข้อมูล ทดลอง และแก้ไขปัญหาเชิงวิศวกรรมได้.
• มีความรู้ด้านวัสดุพลาสติก เช่น PP, PE หรือวัสดุชีวภาพ จะได้รับการพิจารณาเป็นพิเศษ.
• มีทักษะในการวิเคราะห์ข้อมูลด้วย Excel หรือโปรแกรมวิเคราะห์ข้อมูล.
• สามารถสื่อสารภาษาอังกฤษได้ดี ทั้งการอ่านเอกสารทางเทคนิคและการติดต่อ Supplier ต่างประเทศ.