ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Cloud Computing, Enthusiastic, Electronics, Leadership Skill, Assembly

ประเภทงาน:

งานประจำ

• Serve as the principal Product Engineer for assigned Cloud products.
• Own product definition, technical performance, manufacturing readiness, and lifecycle execution.
• Act as the primary technical interface between Manufacturing, R&D, and global engineering teams.
• Lead resolution of complex product, manufacturing, and field-quality issues.
• Provide technical direction, risk assessment, and data-driven recommendations to stakeholders.
• Mentor engineers and strengthen product-engineering capability within the organization.
• Product Industrialization & NPI.
• Lead product industrialization from development through volume production.
• Drive product-engineering activities for NPI, product transfer, qualification, and production ramp-up.
• Ensure BOMs, drawings, specifications, product configurations, and documentation are accurate and production-ready.
• Lead DfX reviews, including Design for Manufacturability, Assembly, Test, Reliability, and Cost.
• Ensure product and manufacturing risks are identified and controlled before release.
• Yield, Quality & Cost Excellence.
• Drive improvements in product yield, performance, quality, reliability, and manufacturing cost.
• Lead root-cause investigations and corrective actions for complex manufacturing and field issues.
• Identify product-optimization and cost-reduction opportunities through design, material, and engineering changes.
• Review product data and technical trends to prevent recurring issues and improve product maturity.
• Cross-functional & Global Collaboration.
• Lead alignment across Manufacturing, R&D, Process Engineering, Quality, NPI, Supply Chain, and global teams.
• Communicate technical status, risks, priorities, and improvement plans to senior stakeholders.
• Influence technical decisions and ensure timely execution of product-related actions.
• Support product and manufacturing strategies aligned with business priorities.
• Safety, Health & Environmental.
• Comply with all EHS policies, procedures, and standards.
• Promote safe work practices and support continuous improvement toward a Zero Accident culture.
• Bachelor's degree in Electrical, Mechanical, Optical, Manufacturing Engineering, Physics, or a related field; a master's degree is preferred.
• At least 12 years of experience in product engineering, manufacturing engineering, or a related technical role.
• Extensive experience supporting NPI, product transfer, volume ramp, and sustaining engineering.
• Strong understanding of product lifecycle management, configuration control, DfX, qualification, and engineering-change management.
• Experience in optical, photonic, semiconductor, electronics, or other high-technology manufacturing is strongly preferred.
• Proven ability to lead complex technical investigations and influence cross-functional decisions.
• Strong analytical, technical leadership, problem-solving, and stakeholder-management skills.
• Effective English communication and ability to work with global teams.
• Preferred Competencies.
• Product Ownership and Technical Leadership.
• Strategic and Systems Thinking.
• Manufacturing and Business Acumen.
• Complex Problem-Solving.
• Risk-Based Decision-Making.
• Cross-functional Influence.
• Coaching and Capability Development.
• Working Conditions.
• Work in office, engineering laboratory, cleanroom, and manufacturing-floor environments.
• Occasional support outside normal working hours may be required for production, NPI, or global collaboration.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Electrical Engineering, Statistical Analysis, Chemical Engineering, Project Management, Risk Management, Enthusiastic, Assembly

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!.
• Supplier Quality Engineer - Semiconductor.
• Position Summary.
• Lumentum is seeking an Principal Supplier Quality Engineer (SQE) to drive supplier quality excellence for semiconductor commodities supporting next-generation AI clusters, hyperscale cloud data centers, coherent optical communications, silicon photonics, and advanced photonic technologies.
• As the SQE for Semiconductor Commodities, you will partner closely with Design Authority, Product Engineering, Manufacturing Engineering, Commodity Management, Reliability Engineering, and strategic suppliers to ensure supplier capability, manufacturing readiness, product quality and process stability throughout the complete product lifecycle from technology development and supplier selection through New Product Introduction (NPI), production ramping up, and sustaining manufacturing.
• This role is ideal for a technically strong engineer with expertise in semiconductor manufacturing, advanced packaging technologies, and supplier development. Success requires the ability to influence technical decisions across global organizations while developing supplier capabilities that enable innovation, manufacturing scalability, and world-class product quality.
• Product & Business Ownership.
• Serve as the Supplier Quality Engineer for Lumentum's Semiconductor Commodity portfolio.
• Own the supplier quality strategy supporting semiconductor technology roadmaps across multiple Business Units.
• Provide supplier quality leadership throughout the complete product lifecycle, from technology development through sustaining production.
• Partner with Design Authority, Product Engineering and Commodity Management to influence supplier selection, manufacturing strategy, technology roadmaps, and supplier capability development.
• Support multiple concurrent NPI programs while balancing business priorities, supplier readiness, manufacturing capacity, and technology maturity.
• Supplier Quality & Supplier Development.
• Lead supplier qualification, manufacturing capability assessments, process audits, and supplier process readiness evaluations for strategic semiconductor suppliers.
• Evaluate supplier manufacturing maturity, process capability, and operational excellence across wafer fabrication, assembly, packaging, and test operations.
• Develop supplier improvement roadmaps focused on quality, yield, process capability and stability, manufacturing robustness, and operational excellence.
• Identify supplier risks and develop mitigation strategies supporting business continuity, supply resiliency, and product quality.
• Drive Lean Manufacturing, Six Sigma, and continuous improvement initiatives with strategic suppliers.
• New Product Introduction (NPI).
• Partner with Design Authority, Product Engineering, Manufacturing Engineering, and Program Management to ensure supplier readiness for new product introductions.
• Participate in Design Reviews, Design for Manufacturability (DFM), and Design for Excellence (DFX) activities with Engineering teams and suppliers.
• Lead supplier process qualification, First Article Inspection (FAI), process validation, and production readiness activities.
• Support production ramping, foundry transfers, manufacturing transfers, localization initiatives, supplier capacity expansion, tool qualification, and dual-source qualification projects.
• Ensure suppliers consistently meet quality, reliability, manufacturability, and delivery requirements prior to production release.
• Engineering & Technical Leadership.
• Act as the primary technical quality interface between Lumentum and strategic semiconductor suppliers.
• Influence engineering and supplier decisions without direct authority through technical expertise and data-driven decision making.
• Lead supplier technical reviews, quality reviews, executive escalations, and corrective action activities.
• Drive supplier capability development across advanced semiconductor manufacturing technologies, wafer fabrication processes, assembly, packaging, and automated manufacturing systems.
• Support Engineering organizations with supplier manufacturing expertise during technology development, process qualification, product industrialization, and technology transfers.
• Cross-Functional Collaboration.
• Work closely with Design Authority, Product Engineering, Commodity Management, Manufacturing Engineering, Reliability Engineering, Operations, Program Management, and Customer Quality.
• Support supplier changes, value engineering initiatives, localization programs, manufacturing optimization, and cost reduction projects.
• Utilize supplier quality metrics, statistical analysis, SPC, and manufacturing data to improve supplier capability and product quality.
• Drive proactive supplier risk management, manufacturing readiness, and long-term supplier development throughout the product lifecycle.
• Required.
• Bachelor's degree in Electrical Engineering, Materials Science, Semiconductor Engineering, Physics, Chemical Engineering, or a related engineering discipline.
• Minimum 8 years of experience in Supplier Quality Engineering, Manufacturing Quality, Product Quality, Process Engineering, or Quality Engineering within a high-technology semiconductor manufacturing environment.
• Technical understanding of semiconductor manufacturing technologies, including wafer fabrication, epitaxial growth, lithography, thin-film deposition, etch, CMP, bumping, wafer probing, singulation, assembly, packaging, and final test.
• Experience with compound semiconductor or photonic technologies such as InP, GaAs, Silicon Photonics, CMOS, SOI, or advanced semiconductor packaging.
• Experience supporting supplier qualification, process validation, New Product Introduction (NPI), foundry qualification, manufacturing transfer, and production ramp activities.
• Knowledge of semiconductor quality systems, statistical process control, process capability analysis, FMEA, Control Plans, Measurement System Analysis (MSA), JEDEC qualification standards, and structured problem-solving methodologies.
• Familiarity with semiconductor reliability qualifications, including HTOL, HAST, thermal cycling.
• Familiarity with 8D failure analysis techniques.
• Excellent communication, organizational, project management, and leadership skills.
• Demonstrated ability to influence cross-functional technical decisions across engineering, manufacturing, sourcing, and supplier organizations.
• Willingness to travel domestically and internationally (approximately 20-30%).
• Why Join Lumentum?.
• At Lumentum, Supplier Quality Engineering is evolving into a strategic engineering organization that partners closely with Design Authority, Product Engineering, Manufacturing Engineering, and our global semiconductor supply base to enable innovation and business growth.
• As the SQE for Semiconductor Commodities, you will help shape supplier technology roadmaps, influence supplier selection, accelerate new product introductions, and develop the manufacturing capabilities required to deliver the next generation of AI networking, silicon photonics, coherent optics, and advanced semiconductor technologies. Your work will directly impact the performance, scalability, reliability, and supply resilience of the semiconductor devices powering the world's most advanced communications infrastructure.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

7 ปีขึ้นไป

ทักษะ:

Industrial Engineering, Analytical Thinking, Data Analysis, Enthusiastic, Electronics

ประเภทงาน:

งานประจำ

• Develop capacity models for manpower, equipment, space, and production requirements.
• Analyze demand, production constraints, and utilization to support capacity and investment decisions.
• Identify bottlenecks and recommend practical solutions to improve production flow.
• Support workforce planning, headcount requirements, and equipment justification.
• Productivity & Operational Excellence.
• Lead productivity, labor-efficiency, cycle-time, and cost-reduction initiatives.
• Conduct time studies, work measurement, line balancing, and standardized-work analysis.
• Optimize manufacturing layouts, material flow, workstation design, and resource utilization.
• Establish and monitor productivity standards and operational KPIs.
• Lead Lean Manufacturing, waste-reduction, and continuous-improvement projects.
• NPI & Manufacturing Readiness.
• Support new product introduction, process transfer, production ramp-up, and manufacturing-readiness reviews.
• Define manpower, equipment, capacity, space, and layout requirements for new products.
• Partner with cross-functional teams to ensure production systems are scalable, efficient, and cost-effective.
• Data Analysis & Technical Leadership.
• Develop analytical models, dashboards, and business cases to support operational decisions.
• Present capacity, productivity, cost, and investment recommendations to management.
• Provide technical guidance and coaching to engineers and cross-functional teams.
• Lead complex, cross-functional improvement projects from planning through implementation.
• Bachelor's degree or higher in Industrial Engineering, Manufacturing Engineering, Operations Management, or a related field.
• Minimum 7 years of experience in industrial engineering, manufacturing engineering, or operational excellence.
• Experience in optical, photonic, semiconductor, electronics, or high-volume manufacturing is preferred.
• Strong experience in capacity planning, time study, line balancing, layout design, labor modeling, and productivity improvement.
• Good knowledge of Lean Manufacturing, Six Sigma, Kaizen, value-stream mapping, and problem-solving methodologies.
• Strong analytical skills with proficiency in Excel and data-visualization or analytical tools.
• Experience supporting NPI, manufacturing transfer, capital investment, and production ramp-up.
• Strong project leadership, business acumen, and cross-functional influencing skills.
• Good command of written and spoken English.
• Preferred Competencies.
• Strategic and Analytical Thinking.
• Technical Leadership and Influence.
• Capacity and Productivity Management.
• Operational Excellence.
• Data-Driven Decision-Making.
• Cross-functional Collaboration.
• Project and Change Management.
• Working Conditions.
• Work in office, cleanroom, and manufacturing-floor environments.
• Occasional support outside normal working hours may be required depending on project and production needs.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Analytical Thinking, Cloud Computing, Product Design, Data Analysis, ISO/IEC 17025

ประเภทงาน:

งานประจำ

• Lead failure-analysis investigations for manufacturing issues, product failures, and customer RMA cases. Determine failure mechanisms and identify root causes using structured problem-solving and analytical techniques. Serve as a technical expert in failure-analysis methods, laboratory techniques, and material characterization. Perform analysis on electronic manufacturing materials, including epoxy, solder, adhesives, coatings, and PCB/PCBA construction materials. Conduct material characterization and analytical testing to support product design, process development, material selec ...
• Qualifications and Experience Master's degree in Materials Engineering, Materials Science, Chemistry, Physics, or a related technical discipline; or a bachelor's degree with at least five years of relevant hands-on failure-analysis experience in an electronics manufacturing environment. At least 5 years of experience conducting failure analysis for electronic products, components, PCBAs, or manufacturing processes. Strong hands-on experience with failure-analysis and material-characterization techniques. Proficiency in using and interpreting results from FTIR, SEM/EDX, X-ray, TGA, and DSC. Practical experience in cross-sectional sample preparation, including cutting, mounting, polishing, and lapping for microscopic inspection. Good knowledge of electronic assembly materials and construction, including epoxy, solder, adhesives, coatings, PCB, and PCBA structures. Experience in technical data analysis, hardware, software, board design, or automated data-acquisition systems is preferred. Basic knowledge of electrical fault-isolation techniques and electronic circuits is an advantage. Understanding of laboratory quality-management systems in accordance with ISO/IEC 17025. Experience with structured problem-solving tools such as 8D, 5 Why, Fishbone Analysis, FMEA, or DOE is preferred. Good written and verbal communication skills in English. Ability to communicate technical findings clearly and work effectively with cross-functional and global teams.
• Key Competencies.
• Strong analytical thinking and systematic problem-solving skills. Excellent technical judgment and attention to detail. Ability to translate complex analytical findings into clear conclusions and actionable recommendations. Strong ownership and commitment to timely results. Effective cross-functional collaboration and technical communication. Ability to manage multiple failure-analysis cases and priorities. Commitment to laboratory safety, data integrity, quality, and continuous improvement. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Electrical Engineering, Mechanical Engineering, Statistical Analysis, Data Analysis, Enthusiastic

ประเภทงาน:

งานประจำ

• Failure Investigation & Root Cause Analysis: Perform on-site failure investigation, analyze test failures, identify root causes, and implement corrective and preventive actions.
• Yield & Data Analysis: Analyze production yield, test results, and process data to identify trends, improve process capability, and drive yield improvement initiatives.
• Process Improvement: Lead continuous improvement projects to enhance test efficiency, reduce defects, improve equipment utilization, and increase manufacturing producti ...
• Customer Support: Support customer quality issues and engineering requests by performing technical investigations, data analysis, and corrective action implementation.
• Test Equipment Support: Own and maintain production test equipment, coordinate troubleshooting activities, and work with equipment vendors to improve system reliability and uptime.
• Cross-functional Collaboration: Work closely with Product Engineering, Process Engineering, Manufacturing, Quality, Reliability, and R&D teams to resolve technical issues and support new product introduction (NPI).
• Documentation: Prepare and maintain engineering reports, work instructions, process documentation, FMEA, control plans, and engineering change documentation.
• Continuous Improvement: Utilize statistical analysis tools (SPC, DOE, MSA, Cp/Cpk) and structured problem-solving methodologies (8D, Fishbone, 5 Why) to improve manufacturing performance.
• Training & Technical Support: Provide technical guidance and training to technicians and operators to ensure consistent execution of production test processes.
• Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, Mechanical Engineering, Mechatronics, Physics, or a related engineering field.
• 5+ years of experience in semiconductor, MEMS, photonics, or electronics manufacturing.
• Experience in production testing, failure analysis, process engineering, or manufacturing engineering.
• Strong analytical skills with experience in root cause analysis and statistical problem-solving tools (DOE, SPC, FMEA, MSA).
• Experience with production test equipment and automated manufacturing systems.
• Knowledge of electrical measurements and data analysis tools such as JMP, Minitab, or Python is an advantage.
• Excellent communication and cross-functional collaboration skills.
• Experience in cleanroom manufacturing environments is preferred.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ทักษะ:

Enthusiastic

ประเภทงาน:

งานประจำ

• Reporting to Equipment & Maintenance Manager or Sr. Manager to drive technical problem resolution and process execution to ensure production targets are met and product quality meets customer expectations. As the Thailand base product engineer, the responsibilities also include.
• Take corrective action when equipment / tooling has any failure for short term and long term.
• Equipment PM, Equipment Calibration documents preparation, provide training and main ...
• Evaluates, selects, and orders equipment and spare part that is most appropriate and cost effective for the manufacture of company products.
• Overseas the installation, modification, upgrade, and maintenance of manufacturing equipment.
• Maintains current records on equipment manufacturers' technical notices, upgrades, and safety issues.
• Studies equipment performance and reliability.
• Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process.
• Provides technical support to the manufacturing equipment repair and process engineering organizations.
• Defines and writes preventative maintenance schedules.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ทักษะ:

Cloud Computing

ประเภทงาน:

งานประจำ

• Own product definition, technical performance, and manufacturing execution for assigned Cloud products.
• Serve as the primary technical interface between Manufacturing and R&D for product-related matters.
• Lead product-level technical analysis, issue resolution, risk assessment, and change implementation.
• Maintain product performance and manufacturing readiness throughout the product lifecycle.
• Product Industrialization & NPI.
• Support product industrialization from development through volume production.
• Execute product-engineering activities for NPI, product transfer, qualification, and production ramp-up.
• Ensure the accuracy and readiness of BOMs, drawings, specifications, and product configurations.
• Support DfX activities, including Design for Manufacturability, Assembly, Test, and Reliability.
• Coordinate product-documentation release and engineering-change management.
• Yield, Quality & Cost Improvement.
• Analyze and improve product yield, performance, quality, and reliability.
• Lead or support root-cause investigations and corrective actions for manufacturing and field issues.
• Drive cost-reduction opportunities through product optimization, material evaluation, and engineering changes.
• Use product and manufacturing data to identify technical risks and improvement opportunities.
• Cross-functional & Global Collaboration.
• Collaborate with local and global Manufacturing, R&D, Process Engineering, Quality, and NPI teams.
• Communicate technical status, risks, priorities, and data-driven recommendations to stakeholders.
• Drive cross-functional alignment to ensure successful product transfer and manufacturing execution.
• Safety, Health & Environmental.
• Comply with all EHS policies, procedures, and standards.
• Support EHS initiatives and continuous-improvement activities.
• Promote safe work practices and contribute to a Zero Accident culture.
• Bachelor's degree in Electrical, Mechanical, Optical, Manufacturing Engineering, Physics, or a related field; a master's degree is preferred.
• At least 6-10 years of experience in product engineering, manufacturing engineering, or a related role in high-technology manufacturing.
• Strong experience supporting NPI, product transfer, volume ramp, and sustaining engineering.
• Solid understanding of product lifecycle management, configuration control, and manufacturing interfaces.
• Experience in optical, photonic, semiconductor, or electronics manufacturing is strongly preferred.
• Knowledge of BOM management, engineering changes, product qualification, DfX, and structured problem-solving.
• Strong analytical, technical problem-solving, and decision-making skills.
• Effective English communication and ability to work with local and global teams.
• Preferred Competencies.
• Product Ownership.
• Technical Leadership.
• Manufacturing and Business Acumen.
• Structured Problem-Solving.
• Data-Driven Decision-Making.
• Cross-functional Collaboration.
• Risk and Change Management.
• Working Conditions.
• Work in office, engineering laboratory, cleanroom, and manufacturing-floor environments.
• Occasional support outside normal working hours may be required for production, NPI, or global collaboration.We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Statistical Analysis, Quality Assurance, Risk Management, Cloud Computing, Data Analysis

ประเภทงาน:

งานประจำ

• Support manufacturing-quality performance for assigned products or production areas.
• Monitor defects, yield loss, scrap, rework, process capability, and quality escapes.
• Ensure production processes comply with control plans, work instructions, specifications, and quality requirements.
• Review manufacturing and traceability records for accuracy and compliance.
• Define or improve inspection methods, sampling plans, acceptance criteria, and process controls.
• Manage nonconforming products and support Material Review Board disposition.
• Problem Resolution & Improvement.
• Lead investigations into product, process, material, and workmanship issues.
• Drive containment, root-cause analysis, corrective and preventive actions, and effectiveness verification.
• Use 8D, CAPA, PFMEA, SPC, MSA, and other quality tools to prevent recurrence.
• Lead improvement activities to reduce defects, variation, scrap, rework, and cost of poor quality.
• Provide quality guidance and technical support to production teams.
• NPI & Change Management.
• Support quality readiness for NPI, product transfer, qualification, and production ramp-up.
• Ensure PFMEA, control plans, inspection methods, traceability, and quality documentation are ready before production release.
• Review engineering, material, equipment, and process changes to ensure quality risks are properly controlled.
• Quality Systems & Compliance.
• Ensure compliance with company quality systems, customer requirements, and applicable ISO standards.
• Support internal, customer, and external audits.
• Follow up and drive corrective actions to timely and effective closure.
• Promote strong manufacturing discipline, quality ownership, and continuous improvement.
• Bachelor's degree or higher in Engineering, Materials Science, Physics, Applied Science, or a related field.
• At least five years of experience in manufacturing quality assurance or quality engineering.
• Experience in optical, photonic, semiconductor, electronics, or high-technology manufacturing is preferred.
• Good knowledge of 8D, RCA, CAPA, PFMEA, control plans, SPC, MSA, and statistical analysis.
• Experience with manufacturing nonconformance, audits, NPI, process validation, and engineering changes.
• Good understanding of ISO 9001 or comparable quality-management systems.
• Strong analytical, problem-solving, communication, and cross-functional collaboration skills.
• Good command of written and spoken English.
• Preferred Competencies.
• Manufacturing Quality Focus.
• Structured Problem-Solving.
• Quality Risk Management.
• Data Analysis.
• Audit and Compliance Readiness.
• Cross-functional Collaboration.
• Continuous Improvement Mindset.
• Working Conditions.
• Work in office, quality laboratory, cleanroom, and manufacturing-floor environments.
• Occasional support outside normal working hours may be required for urgent manufacturing-quality issues.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ทักษะ:

Cloud Computing

ประเภทงาน:

งานประจำ

• Own product definition, technical performance, and manufacturing execution for assigned Cloud products.
• Serve as the primary technical interface between Manufacturing and R&D for product-related matters.
• Lead product-level technical analysis, issue resolution, risk assessment, and change implementation.
• Maintain product performance and manufacturing readiness throughout the product lifecycle.
• Product Industrialization & NPI.
• Support product industrialization from development through volume production.
• Execute product-engineering activities for NPI, product transfer, qualification, and production ramp-up.
• Ensure the accuracy and readiness of BOMs, drawings, specifications, and product configurations.
• Support DfX activities, including Design for Manufacturability, Assembly, Test, and Reliability.
• Coordinate product-documentation release and engineering-change management.
• Yield, Quality & Cost Improvement.
• Analyze and improve product yield, performance, quality, and reliability.
• Lead or support root-cause investigations and corrective actions for manufacturing and field issues.
• Drive cost-reduction opportunities through product optimization, material evaluation, and engineering changes.
• Use product and manufacturing data to identify technical risks and improvement opportunities.
• Cross-functional & Global Collaboration.
• Collaborate with local and global Manufacturing, R&D, Process Engineering, Quality, and NPI teams.
• Communicate technical status, risks, priorities, and data-driven recommendations to stakeholders.
• Drive cross-functional alignment to ensure successful product transfer and manufacturing execution.
• Safety, Health & Environmental.
• Comply with all EHS policies, procedures, and standards.
• Support EHS initiatives and continuous-improvement activities.
• Promote safe work practices and contribute to a Zero Accident culture.
• Bachelor's degree in Electrical, Mechanical, Optical, Manufacturing Engineering, Physics, or a related field; a master's degree is preferred.
• At least 6-10 years of experience in product engineering, manufacturing engineering, or a related role in high-technology manufacturing.
• Strong experience supporting NPI, product transfer, volume ramp, and sustaining engineering.
• Solid understanding of product lifecycle management, configuration control, and manufacturing interfaces.
• Experience in optical, photonic, semiconductor, or electronics manufacturing is strongly preferred.
• Knowledge of BOM management, engineering changes, product qualification, DfX, and structured problem-solving.
• Strong analytical, technical problem-solving, and decision-making skills.
• Effective English communication and ability to work with local and global teams.
• Preferred Competencies.
• Product Ownership.
• Technical Leadership.
• Manufacturing and Business Acumen.
• Structured Problem-Solving.
• Data-Driven Decision-Making.
• Cross-functional Collaboration.
• Risk and Change Management.
• Working Conditions.
• Work in office, engineering laboratory, cleanroom, and manufacturing-floor environments.
• Occasional support outside normal working hours may be required for production, NPI, or global collaboration.We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ทักษะ:

Data Analysis, Enthusiastic, Electronics, Assembly, English

ประเภทงาน:

งานประจำ

• Serve as the Test Engineer for assigned products, owning test strategy, coverage, and execution.
• Define, develop, and maintain manufacturing and reliability test plans, test specifications, and test coverage requirements.
• Act as the primary technical owner for test-related issues and escalations.
• Reliability & Validation Engineering.
• Plan and execute reliability testing to validate product robustness against environmental, mechanical, and operational stress conditions.
• Analyze test and reliability data to identify failure trends and improvement opportunities.
• Support Design for Testability and Reliability (DfT / DfR) in collaboration with R&D and Product Engineering.
• New Product Introduction (NPI) & Lifecycle Support.
• Execute product engineering activities for NPI, product transfer, and production ramp.
• Support Design for Manufacturability, Assembly, Test, and Reliability in collaboration with R&D and Process Engineering.
• Support product qualification, documentation release, and engineering change management.
• Yield, Quality & Cost Performance.
• Support analysis and improvement of product yield, performance, and quality metrics.
• Participate in root cause analysis and corrective actions for product-related manufacturing and field issues.
• Contribute to cost reduction initiatives through product optimization and engineering changes.
• Cross-Functional & Global Collaboration.
• Collaborate with local and global engineering teams to support product readiness and execution.
• Communicate technical status, risks, and data-driven recommendations to stakeholders.
• Support alignment across functions to ensure smooth manufacturing execution.
• Safety, Health & Environmental (EHS) Responsibility.
• Comply with all EHS policies, procedures, and standards.
• Actively support EHS initiatives and continuous improvement actions.
• Promote safe work practices and contribute to a Zero Accident Culture.
• Bachelor's degree in Engineering (Electrical, Mechanical, Optical, Physics, or related field); Master's preferred.
• 6-10+ years of experience in test engineering or reliability engineering within high-tech manufacturing environments.
• Strong hands-on experience in manufacturing test development, execution, and data analysis.
• Experience supporting reliability testing, qualification, and validation activities.
• Background in optical, photonics, semiconductor, or electronics manufacturing is strongly preferred.
• Strong analytical, problem-solving, and documentation skills.
• Effective communication skills in English and ability to work in a global team environment.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Problem Solving, Data Analysis, Enthusiastic, Electronics, Automation

ประเภทงาน:

งานประจำ

• Monitor manufacturing-process performance using SPC and other analytical tools.
• Maintain process stability and ensure manufacturing processes meet production, quality, and cost targets.
• Review manufacturing information and traceability records for accuracy and compliance.
• Provide timely technical support to production operators and technicians.
• Troubleshooting & Problem Solving.
• Troubleshoot process, yield, quality, material, and equipment-related issues.
• Conduct root-cause analysis and implement corrective and preventive actions.
• Analyze production data to identify process trends, deviations, and improvement opportunities.
• Work with relevant teams to ensure corrective actions are completed effectively.
• Process Improvement & Operational Excellence.
• Develop, validate, and implement process improvements.
• Improve product quality and yield while reducing defects, cycle time, and manufacturing costs.
• Lead or support Lean Manufacturing, Six Sigma, and continuous-improvement activities.
• Support automation and manufacturing-efficiency improvement initiatives.
• New Product & Process Introduction.
• Support new product introduction and transfer processes from development to mass production.
• Collaborate with R&D, NPI, Production, Quality, and Equipment Engineering teams.
• Support process qualification, validation, pilot builds, and production ramp-up.
• Identify manufacturing risks and establish appropriate process controls.
• Documentation & Compliance.
• Develop and maintain process specifications, work instructions, control plans, and Engineering Change Orders.
• Ensure manufacturing processes comply with quality systems, operational procedures, and customer requirements.
• Support internal, external, and customer audits as required.
• Ensure compliance with safety, ESD, cleanroom, and company requirements.
• Bachelor's degree or higher in Engineering, Physics, Materials Science, or a related field.
• Minimum 3 years of experience in manufacturing, process, or sustaining engineering.
• Experience in optical, photonic, electronics, semiconductor, or high-technology manufacturing is preferred.
• Knowledge of SPC, RCA, CAPA, FMEA, DOE, Lean Manufacturing, and Six Sigma.
• Strong troubleshooting, data-analysis, and problem-solving skills.
• Ability to prepare and maintain technical and manufacturing documentation.
• Good cross-functional collaboration and communication skills.
• Good command of English communication.
• Preferred Competencies.
• Manufacturing Process Sustaining.
• Technical Problem Solving.
• Data Analysis and Decision-Making.
• Process Improvement and Optimization.
• Cross-functional Collaboration.
• Quality and Compliance Awareness.
• Continuous Improvement Mindset.
• Working Conditions.
• Work in office, engineering laboratory, cleanroom, and manufacturing-floor environments.
• Personal protective equipment and cleanroom garments may be required.
• Occasional overtime or support outside normal working hours may be required depending on production needs.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

7 ปีขึ้นไป

ทักษะ:

Problem Solving, Data Analysis, Enthusiastic, Electronics, Automation

ประเภทงาน:

งานประจำ

• Monitor manufacturing-process performance using SPC and other analytical tools.
• Maintain process stability and ensure manufacturing processes meet production, quality, and cost targets.
• Review manufacturing information and traceability records for accuracy and compliance.
• Provide timely technical support to production operators and technicians.
• Troubleshooting & Problem Solving.
• Troubleshoot process, yield, quality, material, and equipment-related issues.
• Conduct root-cause analysis and implement corrective and preventive actions.
• Analyze production data to identify process trends, deviations, and improvement opportunities.
• Work with relevant teams to ensure corrective actions are completed effectively.
• Process Improvement & Operational Excellence.
• Develop, validate, and implement process improvements.
• Improve product quality and yield while reducing defects, cycle time, and manufacturing costs.
• Lead or support Lean Manufacturing, Six Sigma, and continuous-improvement activities.
• Support automation and manufacturing-efficiency improvement initiatives.
• New Product & Process Introduction.
• Support new product introduction and transfer processes from development to mass production.
• Collaborate with R&D, NPI, Production, Quality, and Equipment Engineering teams.
• Support process qualification, validation, pilot builds, and production ramp-up.
• Identify manufacturing risks and establish appropriate process controls.
• Documentation & Compliance.
• Develop and maintain process specifications, work instructions, control plans, and Engineering Change Orders.
• Ensure manufacturing processes comply with quality systems, operational procedures, and customer requirements.
• Support internal, external, and customer audits as required.
• Ensure compliance with safety, ESD, cleanroom, and company requirements.
• Bachelor's degree or higher in Engineering, Physics, Materials Science, or a related field.
• Minimum 7 years of experience in manufacturing, process, or sustaining engineering.
• Experience in optical, photonic, electronics, semiconductor, or high-technology manufacturing is preferred.
• Knowledge of SPC, RCA, CAPA, FMEA, DOE, Lean Manufacturing, and Six Sigma.
• Strong troubleshooting, data-analysis, and problem-solving skills.
• Ability to prepare and maintain technical and manufacturing documentation.
• Good cross-functional collaboration and communication skills.
• Good command of English communication.
• Preferred Competencies.
• Manufacturing Process Sustaining.
• Technical Problem Solving.
• Data Analysis and Decision-Making.
• Process Improvement and Optimization.
• Cross-functional Collaboration.
• Quality and Compliance Awareness.
• Continuous Improvement Mindset.
• Working Conditions.
• Work in office, engineering laboratory, cleanroom, and manufacturing-floor environments.
• Personal protective equipment and cleanroom garments may be required.
• Occasional overtime or support outside normal working hours may be required depending on production needs.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Problem Solving, Enthusiastic, Electronics, Automation, English

ประเภทงาน:

งานประจำ

• Monitor manufacturing-process performance using SPC and other analytical tools.
• Maintain process stability and ensure manufacturing processes meet production, quality, and cost targets.
• Review manufacturing information and traceability records for accuracy and compliance.
• Provide timely technical support to production operators and technicians.
• Troubleshooting & Problem Solving.
• Troubleshoot process, yield, quality, material, and equipment-related issues.
• Conduct root-cause analysis and implement corrective and preventive actions.
• Analyze production data to identify process trends, deviations, and improvement opportunities.
• Work with relevant teams to ensure corrective actions are completed effectively.
• Process Improvement & Operational Excellence.
• Develop, validate, and implement process improvements.
• Improve product quality and yield while reducing defects, cycle time, and manufacturing costs.
• Lead or support Lean Manufacturing, Six Sigma, and continuous-improvement activities.
• Support automation and manufacturing-efficiency improvement initiatives.
• New Product & Process Introduction.
• Support new product introduction and transfer processes from development to mass production.
• Collaborate with R&D, NPI, Production, Quality, and Equipment Engineering teams.
• Support process qualification, validation, pilot builds, and production ramp-up.
• Identify manufacturing risks and establish appropriate process controls.
• Documentation & Compliance.
• Develop and maintain process specifications, work instructions, control plans, and Engineering Change Orders.
• Ensure manufacturing processes comply with quality systems, operational procedures, and customer requirements.
• Support internal, external, and customer audits as required.
• Ensure compliance with safety, ESD, cleanroom, and company requirements.
• Bachelor's degree or higher in Engineering, Physics, Materials Science, or a related field.
• Minimum 5 years of experience in manufacturing, process, or sustaining engineering.
• Experience in optical, photonic, electronics, semiconductor, or high-technology manufacturing is preferred.
• Knowledge of SPC, RCA, CAPA, FMEA, DOE, Lean Manufacturing, and Six Sigma.
• Strong troubleshooting, data-analysis, and problem-solving skills.
• Ability to prepare and maintain technical and manufacturing documentation.
• Good cross-functional collaboration and communication skills.
• Good command of English communication.
• Preferred Competencies.
• Manufacturing Process Sustaining.
• Technical Problem Solving.
• Data Analysis and Decision-Making.
• Process Improvement and Optimization.
• Cross-functional Collaboration.
• Quality and Compliance Awareness.
• Continuous Improvement Mindset.
• Working Conditions.
• Work in office, engineering laboratory, cleanroom, and manufacturing-floor environments.
• Personal protective equipment and cleanroom garments may be required.
• Occasional overtime or support outside normal working hours may be required depending on production needs.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

15 ปีขึ้นไป

ทักษะ:

Electrical Engineering, Industrial Engineering, Enthusiastic, Architecture, Electronics

ประเภทงาน:

งานประจำ

• Lead, grow, and develop a distributed team of AI/ML engineers who work across manufacturing sites and solve site-specific operational problems.
• Establish the technical vision, engineering standards, delivery practices, and talent strategy for manufacturing AI across the organization.
• Create a strong partnership model with plant leadership, manufacturing engineering, process engineering, yield, quality, operations, IT, and enterprise data teams.
• Balance local site responsiveness with reusable platforms, common architectures, shared components, and responsible AI practices that scale across plants.
• Set and execute a multi-year roadmap for AI/ML applications in manufacturing, aligned to business priorities and measurable operational outcomes.
• Identify and prioritize high-impact opportunities across process optimization, yield improvement, visual inspection, defect classification, predictive maintenance, anomaly detection, root-cause analysis, quality, scheduling, and engineering productivity.
• Guide the architecture, design, development, validation, deployment, and lifecycle management of production-grade AI/ML systems used in manufacturing workflows.
• Define engineering patterns for data pipelines, feature and model management, experiment tracking, APIs, user interfaces, monitoring, cybersecurity, reliability, and model performance management.
• Ensure solutions work with real manufacturing data and systems, including MES, SPC, QMS, equipment and sensor data, inspection systems, yield systems, ERP, databases, engineering reports, and other structured and unstructured sources.
• Drive disciplined problem definition and value measurement, connecting technical delivery to improvements in cycle time, throughput, yield, scrap, quality, cost, safety, and decision speed.
• Partner with site teams to understand workflows, constraints, process variation, data quality, user needs, and adoption barriers; ensure solutions are usable by engineers, operators, and business stakeholders.
• Build and maintain strong relationships with senior manufacturing and technology leaders, communicating technical tradeoffs, risks, investment needs, and results with clarity.
• Promote effective use of classical machine learning, deep learning, computer vision, optimization, statistical methods, LLMs, and generative AI where they are fit for purpose.
• Establish governance for responsible, secure, explainable, and maintainable AI in manufacturing, including validation, human oversight, change control, and production support.
• Required.
• 15+ years of progressive experience in software engineering, AI/ML engineering, data science, or a closely related technical discipline, including significant leadership experience.
• Bachelor's or master's degree in engineering, computer science, electrical engineering, industrial engineering, data science, or a related field; advanced technical education is preferred.
• Deep hands-on understanding of software engineering practices, distributed systems, cloud or edge architectures, APIs, data platforms, testing, observability, security, and production operations.
• Practical knowledge of manufacturing processes, process variation, yield, quality systems, equipment data, inspection, traceability, root-cause analysis, and the realities of plant operations.
• Willingness and ability to travel 30% or more to manufacturing sites and partner locations.
• Preferred.
• Experience in semiconductor, photonics, electronics, optical components, precision manufacturing, or other high-volume advanced manufacturing environments.
• Experience with manufacturing software and data ecosystems such as MES, SPC, QMS, ERP, equipment automation, inspection platforms, historian systems, and yield management systems.
• Experience scaling AI/ML capabilities across multiple plants, regions, or business units with different processes, data maturity, and operating models.
• Experience applying generative AI, knowledge retrieval, agentic workflows, or LLM-enabled tools to manufacturing, engineering, quality, or operations use cases.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Data Analysis, Enthusiastic, Architecture, Electronics, Automation

ประเภทงาน:

งานประจำ

• Serve as a forward deployed AI engineer embedded with the Bangkok manufacturing team to identify high-impact AI opportunities across process engineering, yield improvement, visual inspection, quality control, operations, and reporting workflows.
• Partner with manufacturing, process, yield, quality, and operations teams to understand workflows, pain points, data sources, and decision-making needs.
• Conduct deep operational assessments at manufacturing sites by observing workflows, interviewing frontline employees, supervisors, trainers, quality leaders, and operat ...
• Design, prototype, and productionize AI/ML solutions for manufacturing use cases, including visual inspection, defect classification, anomaly detection, predictive analytics, root-cause analysis, process optimization, and yield improvement.
• Translate business and manufacturing problems into technical solution designs, including data requirements, model approach, architecture, validation strategy, user interface needs, and deployment path.
• Work with structured and unstructured manufacturing data from databases, equipment logs, inspection systems, MES, yield systems, engineering reports, and other plant data sources.
• Communicate technical concepts clearly to both technical and non-technical stakeholders, including engineers, operators, managers, and senior leaders.
• Mentor local engineers and analysts on AI tools, data science methods, model interpretation, and practical AI adoption in manufacturing workflows.
• Required.
• 5+ years of experience in data science, machine learning, AI engineering, manufacturing analytics, process engineering analytics, or a closely related technical field.
• Strong hands-on experience developing and deploying AI/ML models in real-world industrial or manufacturing environments.
• Practical experience using LLMs and generative AI tools for data analysis, workflow automation, knowledge retrieval, reporting, or engineering productivity applications.
• Strong programming skills in Python and common AI/ML frameworks such as PyTorch, TensorFlow, scikit-learn, OpenCV, and LangChain/LlamaIndex or similar frameworks.
• Experience working with relational databases and SQL, preferably including Oracle or other enterprise database systems.
• Ability to build end-to-end prototypes, including data extraction, model development, backend logic, simple user interfaces, dashboards, APIs, or workflow tools.
• Strong understanding of manufacturing data, process variation, yield analysis, quality systems, equipment data, inspection data, and root-cause analysis methods.
• English communication skills good enough to interact with US and Europe teams.
• Preferred.
• Experience in semiconductor, photonics, electronics, optical components, precision manufacturing, or other high-volume advanced manufacturing environments.
• Experience with manufacturing systems such as MES, SPC, yield management systems, equipment automation systems, inspection platforms, or quality management systems.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Statistical Analysis, Product Development, Project Management, Risk Management, Enthusiastic

ประเภทงาน:

งานประจำ

• Serve as the Supplier Quality Engineer for Lumentum's Optical Components.
• Own the supplier quality strategy supporting the optical commodity technology roadmap across multiple Business Units.
• Provide supplier quality leadership throughout the complete product lifecycle, from technology development through sustaining production.
• Partner with Product Engineering, Component Engineering, and Commodity Management to influence supplier selection, manufacturing strategy, technology roadmaps, and supplier capability development.
• Support multiple concurrent NPI programs while balancing business priorities, supplier readiness, and manufacturing capacity.
• Supplier Quality & Supplier Development.
• Lead supplier qualification, manufacturing capability assessments, process audits, and supplier readiness evaluations for strategic optical component suppliers.
• Evaluate supplier manufacturing maturity, process capability, capacity, scalability, and operational excellence across diverse optical manufacturing technologies.
• Develop supplier improvement roadmaps focused on quality, yield, process capability, manufacturing robustness, and operational excellence.
• Identify supplier risks and develop mitigation strategies supporting business continuity, supply resiliency, and product quality.
• Drive Lean Manufacturing, Six Sigma, and continuous improvement initiatives with strategic suppliers.
• New Product Introduction (NPI).
• Partner with Product Development, Component Engineering, Manufacturing Engineering, and Program Management to ensure supplier readiness for new product introductions.
• Participate in Design Reviews, Design for Manufacturability (DFM), and Design for Excellence (DFX) activities with Engineering teams and suppliers.
• Lead supplier process qualification, First Article Inspection (FAI), process validation, and production readiness activities.
• Support production ramp, supplier transfers, manufacturing transfers, localization initiatives, and capacity expansion projects.
• Ensure suppliers consistently meet quality, reliability, manufacturability, and delivery requirements prior to production release.
• Engineering & Technical Leadership.
• Act as the primary technical quality interface between Lumentum and strategic optical component suppliers.
• Influence engineering and supplier decisions without direct authority through technical expertise and data-driven decision making.
• Lead supplier technical reviews, quality reviews, executive escalations, and corrective action activities.
• Drive supplier capability development across advanced optical manufacturing technologies, precision assembly processes, and automated manufacturing systems.
• Support Engineering organizations with supplier manufacturing expertise during technology development, product industrialization, and manufacturing transfers.
• Cross-Functional Collaboration.
• Work closely with Product Engineering, Component Engineering, Commodity Management, Global Sourcing, Manufacturing, Reliability Engineering, Operations, Program Management, and Customer Quality.
• Support supplier changes, value engineering initiatives, localization programs, and manufacturing optimization projects.
• Utilize supplier quality metrics, statistical analysis, and manufacturing data to improve supplier capability and product quality.
• Drive proactive supplier risk management, manufacturing readiness, and long-term supplier development throughout the product lifecycle.
• Required.
• Bachelor's degree in Optical Engineering, Physics, Materials Science, or a related engineering discipline.
• Minimum 8 years of experience in Supplier Quality Engineering, Manufacturing Quality, Product Quality, or Quality Engineering within a high-technology manufacturing environment.
• Technical understanding of optical component manufacturing technologies, including fiber optics, passive optical components, precision optics, optical assemblies, and photonic devices.
• Experience with optical manufacturing processes such as active alignment, passive alignment, laser welding, adhesive bonding, fiber polishing, precision machining, ceramic manufacturing, and optical metrology.
• Experience supporting supplier qualification, process validation, New Product Introduction (NPI), manufacturing transfer, and production ramp activities.
• Knowledge of supplier quality systems, statistical process control, process capability analysis, FMEA, Control Plans, Measurement System Analysis (MSA), and structured problem-solving methodologies.
• Excellent communication, organizational, project management, and leadership skills.
• Demonstrated ability to influence cross-functional technical decisions across engineering, manufacturing, sourcing, and supplier organizations.
• Willingness to travel domestically and internationally (approximately 20-30%).
• Why Join Lumentum?.
• At Lumentum, Supplier Quality Engineering is evolving into a strategic engineering organization that partners closely with Product Engineering, Component Engineering, and our global supply base to enable innovation and business growth.
• As the SQE for Optical Components, you will help shape supplier technology roadmaps, influence supplier selection, accelerate new product introductions, and develop the manufacturing capabilities required to deliver the next generation of AI networking, coherent optics, and advanced photonic solutions. Your work will directly impact the performance, scalability, reliability, and supply resilience of the technologies powering the world's most advanced communications infrastructure.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ทักษะ:

Statistical Analysis, Problem Solving, Cloud Computing, Product Design, Enthusiastic

ประเภทงาน:

งานประจำ

• Develops and conducts statistical analysis such as Design of Experiments (DOE) and Statistical Process Control (SPC) targeting physical cause of failure for yield loss and improving quality.
• Interacts with product design and development personnel to ensure that processes and designs are compatible. To drive activities in identification and continuous improvement on yield improvement, Bone-piles reduction, and cost reduction. To support problem solving on moderate scope and complexity.
• To support R&D, PLM, FAE, PE, TE, QE, Supply Chain (WH, IQA, Logistic, BOI, Buyer, Trade and Compliance), Finance, Planning and Manufacturing team to ensure the smooth operation from NPI till Mass Production phase.
• To Coordinate related task, and engineering changes with internal in house teams and CM teams.
• Bachelor's degree in Engineering or related field.
• At least 5 years' experience in manufacturing and experience in electronics or optical products. Process expertise and development in Optic Alignment especially die bonder, wire bonder, Lid Seal and Leak Test is preferable.
• Demonstrate the construction and operation of common electronic and optical components. Familiar with common electronic and optical terminology.
• Be strong interested in solving difficult problems. Recognize and efficiently fix common electronic and optical component and circuit problems.
• Strong data analytical skills, Self-motivated, goal oriented, task driven team player.
• Excellent oral and written communication skills in English and Thai.
• Flexibility in work hours to support either early morning or evening conference calls with North America. Ability to effectively present information and respond to questions from groups of managers, customers and engineering team members. Ability to discern priorities in handling stressful situations.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Electrical Engineering, Software Development, Enthusiastic, Automation, Instrument

ประเภทงาน:

งานประจำ

• Develop and maintain test frameworks, libraries, and tools to streamline the test development process and improve efficiency.
• Collaborate closely with other development engineers in Ottawa and Shenzhen.
• Debug and troubleshoot complex software issues, identifying root causes and implementing effective solutions.
• Perform software verification and validation, including unit testing, integration testing, and system-level testing.
• Participate in design reviews and code reviews to ensure adherence to best practices and quality standards.
• Continuously research and evaluate new test technologies, tools, and methodologies to enhance test capabilities. Job Qualifications * Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical field. * 2+ years of experience in test software development, preferably in a manufacturing or R&D environment.
• Strong programming skills in VB.NET, C#, Python, SQL, etc.
• Additional skill set on AI tool is a plus.
• Experience with test equipment automation and instrument control.
• Familiarity with various communication protocols (e.g., SCADA, PLC, GPIB, USB, Ethernet, RS-232).
• Experience with software development methodologies (e.g., Agile, Scrum).
• Knowledge of optical and photonic components, systems, or test methodologies is a plus.
• Excellent problem-solving, analytical, and debugging skills.
• Require written and verbal communication skills in English.
• Ability to work independently and as part of a cross-functional team in a fast-paced environment. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Problem Solving, Data Analysis, Enthusiastic, Electronics, Automation

ประเภทงาน:

งานประจำ

• Monitor manufacturing-process performance using SPC and other analytical tools.
• Maintain process stability and ensure manufacturing processes meet production, quality, and cost targets.
• Review manufacturing information and traceability records for accuracy and compliance.
• Provide timely technical support to production operators and technicians.
• Troubleshooting & Problem Solving.
• Troubleshoot process, yield, quality, material, and equipment-related issues.
• Conduct root-cause analysis and implement corrective and preventive actions.
• Analyze production data to identify process trends, deviations, and improvement opportunities.
• Work with relevant teams to ensure corrective actions are completed effectively.
• Process Improvement & Operational Excellence.
• Develop, validate, and implement process improvements.
• Improve product quality and yield while reducing defects, cycle time, and manufacturing costs.
• Lead or support Lean Manufacturing, Six Sigma, and continuous-improvement activities.
• Support automation and manufacturing-efficiency improvement initiatives.
• New Product & Process Introduction.
• Support new product introduction and transfer processes from development to mass production.
• Collaborate with R&D, NPI, Production, Quality, and Equipment Engineering teams.
• Support process qualification, validation, pilot builds, and production ramp-up.
• Identify manufacturing risks and establish appropriate process controls.
• Documentation & Compliance.
• Develop and maintain process specifications, work instructions, control plans, and Engineering Change Orders.
• Ensure manufacturing processes comply with quality systems, operational procedures, and customer requirements.
• Support internal, external, and customer audits as required.
• Ensure compliance with safety, ESD, cleanroom, and company requirements.
• Bachelor's degree or higher in Engineering, Physics, Materials Science, or a related field.
• Minimum 5 years of experience in manufacturing, process, or sustaining engineering.
• Experience in optical, photonic, electronics, semiconductor, or high-technology manufacturing is preferred.
• Knowledge of SPC, RCA, CAPA, FMEA, DOE, Lean Manufacturing, and Six Sigma.
• Strong troubleshooting, data-analysis, and problem-solving skills.
• Ability to prepare and maintain technical and manufacturing documentation.
• Good cross-functional collaboration and communication skills.
• Good command of English communication.
• Preferred Competencies.
• Manufacturing Process Sustaining.
• Technical Problem Solving.
• Data Analysis and Decision-Making.
• Process Improvement and Optimization.
• Cross-functional Collaboration.
• Quality and Compliance Awareness.
• Continuous Improvement Mindset.
• Working Conditions.
• Work in office, engineering laboratory, cleanroom, and manufacturing-floor environments.
• Personal protective equipment and cleanroom garments may be required.
• Occasional overtime or support outside normal working hours may be required depending on production needs.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ทักษะ:

Cloud Computing, Enthusiastic, Electronics, Leadership Skill, Assembly

ประเภทงาน:

งานประจำ

• Product Engineering Own product definition, technical performance, and manufacturing execution for assigned Cloud products. Serve as the primary technical interface between Manufacturing and R&D for product-related matters. Lead product-level technical analysis, issue resolution, risk assessment, and change implementation. Maintain product performance and manufacturing readiness throughout the product lifecycle. Product Industrialization & NPI Support product industrialization from development through volume production. Execute product-engineering activities for NPI, product transf ...
• Comply with all EHS policies, procedures, and standards. Support EHS initiatives and continuous-improvement activities. Promote safe work practices and contribute to a Zero Accident culture.
• Bachelor's degree in Electrical, Mechanical, Optical, Manufacturing Engineering, Physics, or a related field; a master's degree is preferred. At least 6-10 years of experience in product engineering, manufacturing engineering, or a related role in high-technology manufacturing. Strong experience supporting NPI, product transfer, volume ramp, and sustaining engineering. Solid understanding of product lifecycle management, configuration control, and manufacturing interfaces. Experience in optical, photonic, semiconductor, or electronics manufacturing is strongly preferred. Knowledge of BOM management, engineering changes, product qualification, DfX, and structured problem-solving. Strong analytical, technical problem-solving, and decision-making skills. Effective English communication and ability to work with local and global teams. Preferred Competencies Product Ownership Technical Leadership Manufacturing and Business Acumen Structured Problem-Solving Data-Driven Decision-Making Cross-functional Collaboration Risk and Change Management Accountability and Results Orientation Working Conditions Work in office, engineering laboratory, cleanroom, and manufacturing-floor environments. Occasional support outside normal working hours may be required for production, NPI, or global collaboration. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Quality Assurance, Risk Management, Enthusiastic, Leadership Skill, Assurance

ประเภทงาน:

งานประจำ

• Lead and manage a global team of Supplier Quality Engineers located across multiple sites.
• Establish organizational priorities, performance objectives, and development plans while fostering a culture of accountability, collaboration, and continuous improvement.
• Drive consistent implementation of global supplier quality standards and best practices.
• Supplier Quality & Commodity Management.
• Own the Supplier Quality strategy for Optical Commodities across all Lumentum business units.
• Ensure robust supplier qualification, performance monitoring, risk management, and continuous improvement programs.
• Incoming Quality Assurance (IQA).
• Provide leadership for Incoming Quality Assurance activities across manufacturing sites.
• Ensure effective incoming inspection processes that balance product quality, manufacturing efficiency, and supplier performance.
• Utilize quality data and supplier performance metrics to optimize inspection strategies and drive continuous improvement.
• Supplier Relationship Management.
• Serve as the primary quality representative for optical suppliers.
• Lead supplier communications, quality escalations, and executive-level engagements.
• Develop collaborative supplier partnerships focused on improving quality, reliability, delivery performance, and operational excellence.
• Cross-Functional Collaboration.
• Partner with Engineering, Manufacturing, Operations, Program Management, Supply Chain, Reliability, and Customer Quality to ensure supplier readiness and successful product execution.
• Support business growth by proactively identifying supplier risks and implementing effective mitigation strategies.
• Required.
• Bachelor's degree in Optical Engineering, Physics, Materials Science, or a related technical discipline.
• 10+ years of experience in Supplier Quality, Quality Engineering, or Manufacturing Quality within a high-technology manufacturing environment.
• Minimum 5 years of leadership experience managing engineering or quality organizations.
• Strong technical knowledge of optical components, photonics, fiber optics, lasers, or related optical technologies.
• Experience managing geographically distributed teams.
• Proven experience leading supplier quality initiatives and supplier development programs.
• Excellent communication and stakeholder management skills with experience working directly with strategic suppliers and executive leadership.
• Preferred.
• Master's degree in Engineering or related discipline.
• Experience supporting multiple product lines within a global manufacturing organization.
• Knowledge of semiconductor, photonics, precision optics, and advanced packaging manufacturing processes.
• Why Join Lumentum?.
• This is a highly visible leadership opportunity to shape the global quality strategy for one of Lumentum's most critical commodity areas. The role provides broad exposure across all Business Units while leading a global organization responsible for Supplier Quality Engineering, Incoming Quality Assurance, and strategic supplier engagement. The successful candidate will play a.
• key role.
• in developing talent, strengthening supplier partnerships, and driving quality excellence across Lumentum's worldwide supply chain.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Problem Solving, Leadership Skill, Teamwork, Cloud Computing, English

ประเภทงาน:

งานประจำ

• Design, develop, and maintain scalable data pipelines, data products, and enterprise data.
• models that support analytics, reporting, machine learning, and AI initiatives across.
• Lumentum.
• Build and optimize modern data architectures using Databricks, Delta Lake, Spark, SQL,.
• and cloud-native technologies to enable high-performance analytics and trusted business.
• insights.
• Develop and maintain curated semantic layers, business metrics, and governed datasets.
• that power self-service analytics and conversational AI solutions such as Databricks Genie.
• and other natural language query platforms.
• Partner with business stakeholders across Sales, Operations, Manufacturing, Supply Chain,.
• Finance, and HR to translate business requirements into scalable data solutions and.
• reusable data assets.
• Enable business users to interact with enterprise data through natural language interfaces.
• by designing data models, metadata frameworks, business glossaries, and governance.
• standards that improve AI-generated insights and query accuracy.
• Collaborate with Data Scientists, Analytics Engineers, and BI developers to support.
• advanced analytics, predictive modeling, and AI-driven decision-making.
• Establish data quality, lineage, observability, and governance frameworks to ensure trusted,.
• secure, and compliant enterprise data assets.
• Design and implement enterprise-wide KPI frameworks and metric definitions to create a.
• source of truth across functional domains.
• Optimize data performance, reliability, and scalability while reducing technical debt and.
• improving platform efficiency.
• Support the development of AI-enabled analytics capabilities, including retrieval-augmented.
• generation (RAG), vector search, knowledge repositories, and semantic search.
• solutions that enhance data discovery and business productivity.
• Drive adoption of modern data engineering best practices including CI/CD, Infrastructure as.
• Code, automated testing, and data lifecycle management.
• Partner with leadership and analytics teams to advance Lumentum's vision of a centralized,.
• AI-enabled analytics organization.
• Degree in Computer Engineering, Computer Science, IT, or related fields.
• 10+years of hands-on experience as a Data Engineer or similar role.
• Strong SQL and data modeling skills, including Databricks, Delta Lake, Spark, SQL, and.
• cloud-native technologies.
• Strong analytical, troubleshooting, and problem-solving skills with the ability to support.
• production environments.
• Good communication, problem solving skills, and teamwork mindset.
• Excellent English proficiency (reporting to foreign national).

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Problem Solving, Enthusiastic, Teamwork, SQL, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Lumentum is seeking a.
• Senior Data Engineer.
• to join our Data Science and Data Engineering team. In this role, you will design, build, and optimize scalable data platforms, pipelines, and analytics solutions that enable data-driven decision-making across the enterprise. You will work closely with business leaders, data scientists, analysts, and technology teams to transform complex data into actionable insights that drive operational excellence, business growth, and strategic outcomes.
• This is an opportunity to play a.
• key role.
• in advancing Lumentum's enterprise analytics capabilities by developing modern data architectures, improving data quality and accessibility, and enabling AI and advanced analytics initiatives. You will collaborate across functions including Sales, Operations, Manufacturing, Supply Chain, and Finance to deliver impactful solutions in a fast-paced and innovative environment.
• Design, develop, and maintain scalable data pipelines, data products, and enterprise data models that support analytics, reporting, machine learning, and AI initiatives across Lumentum.
• Build and optimize modern data architectures using Databricks, Delta Lake, Spark, SQL, and cloud-native technologies to enable high-performance analytics and trusted business insights.
• Develop and maintain curated semantic layers, business metrics, and governed datasets that power self-service analytics and conversational AI solutions such as Databricks Genie and other natural language query platforms.
• Partner with business stakeholders across Sales, Operations, Manufacturing, Supply Chain, Finance, and HR to translate business requirements into scalable data solutions and reusable data assets.
• Enable business users to interact with enterprise data through natural language interfaces by designing data models, metadata frameworks, business glossaries, and governance standards that improve AI-generated insights and query accuracy.
• Collaborate with Data Scientists, Analytics Engineers, and BI developers to support advanced analytics, predictive modeling, and AI-driven decision-making.
• Establish data quality, lineage, observability, and governance frameworks to ensure trusted, secure, and compliant enterprise data assets.
• Design and implement enterprise-wide KPI frameworks and metric definitions to create a single source of truth across functional domains.
• Optimize data performance, reliability, and scalability while reducing technical debt and improving platform efficiency.
• Support the development of AI-enabled analytics capabilities, including retrieval-augmented generation (RAG), vector search, knowledge repositories, and semantic search solutions that enhance data discovery and business productivity.
• Drive adoption of modern data engineering best practices including CI/CD, Infrastructure as Code, automated testing, and data lifecycle management.
• Partner with leadership and analytics teams to advance Lumentum's vision of a centralized, AI-enabled analytics organization.
• Degree in Computer Engineering, Computer Science, IT, or related fields.
• 10+years of hands-on experience as a Data Engineer or similar role.
• Strong SQL and data modeling skills, including Databricks, Delta Lake, Spark, SQL, and cloud-native technologies.
• Strong analytical, troubleshooting, and problem-solving skills with the ability to support production environments.
• Good communication, problem solving skills, and teamwork mindset.
• Excellent English proficiency (reporting to foreign national).
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ทักษะ:

Microsoft Office, Leadership Skill, Problem Solving, Enthusiastic, Electronics, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Responsible for Production and Operation control and coordinate activities in manufacturing to achieving total customer requirement.
• Supervise and manage production operator performance in order to improve working efficiency.
• Understands procedure and Production control to support build plan.
• Build plan,Product and operation output (part and products quantity, Scarp and production inventory Control).
• Manage and motivate subordinate to establish the process and improvement products.
• Required.
• Bachelor Degree,Any flied.
• 2- 5 years work experience in Production.
• Production Supervise level, work experience in the optical and/or electronics manufacturing company is preferable.
• Work experience with operation and production control.
• Able to work both day and night shift.
• Good communications skills, both written and verbal in English.
• Computer program skill (Microsoft office, excel, word basic) and production shopfloor management system.
• Competencies.
• Leadership skill / Problem Solving/Analysis.
• Performance Management.
• Results Driven. / 5S and 5Why including safety awareness.
• Communication Proficiency.
• Time Management.
• Technical Capacity.
• Learning Orientation.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Enthusiastic, Data Entry, Payroll, English, Thai

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Accurately enter new employee information into the Workday system.
• Collaborate closely with the recruiting team on the DL hiring plan and manage new hire gift inventory.
• Conduct new employee orientation sessions every Monday, updating presentation slides to align with global standards and translating content into Thai to meet ISO audit requirements.
• Assist with new employee onboarding processes, ensuring policy acknowledgments are signed and maintaining records in compliance with SOX requirements.
• Manage human resource personal information data within the Workday system for Thai employees, adhering to global restrictions.
• Maintain records of employee's personnel-related data (Personal information, provident fund, Insurance, etc.) in both paper and the database and ensure all employment requirements are met.
• Monitor and follow up on probation confirmations with line managers.
• Collaborate with the global HRIS team to identify and resolve Workday system issues.
• Maintain and update the HRC handbook and workflow for Thailand.
• Assist line managers and employees with offboarding processes.
• Provide relevant data for payroll preparation (bonuses, provident fund enrollment, etc.).
• Administer health and welfare plans, including enrollments, changes, and terminations.
• Provide ongoing support to HR operations and benefits teams.
• Generate and submit reports on general HR activities.
• Monitor HRConnections to promptly address employee inquiries and requests.
• Contribute to the development and implementation of HR initiatives and projects.
• Perform other duties as assigned.
• 2-4 years of relevant HR work experience. Good knowledge of general human resources practices, procedures, and benefit.
• Bachelor degree in related field or equivalent experience required.
• Experience with data entry into HR database required.
• Excellent MS Office Suite work experience, emphasis on Word, Excel, and PowerPoint.
• Ability to communicate in English both of written and spoken.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Microsoft Office, Enthusiastic, Accounting, Tableau, Oracle, SAP, ERP, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• About Lumentum.
• Lumentum is illuminating the networks of tomorrow with advanced photonic technologies that enable AI, data centers, telecom, industrial, and sensing applications.
• As AI accelerates the global demand for bandwidth and energy efficiency, we deliver the building blocks that keep data moving reliably, efficiently, and at massive scale. Our optical products support AI and compute infrastructure, cloud and DCI environments, metro and long-haul networks, while our lasers drive breakthroughs in precision manufacturing and sensing. For nearly five decades, Lumentum has been at the intersection of light and innovation. What began as a vision with JDS Uniphase to harness the power of photonics has evolved into a global force driving the communication infrastructure of tomorrow.
• At Lumentum, we're building more than a business we're building a team of passionate innovators whose drive to collaborate, create, and connect the world fuels everything we do. We are part of the AI technology revolution and we are illuminating the path forward. Headquartered in San Jose, California, we operate worldwide through a network of R&D, manufacturing, and sales locations.
• Senior FP&A Analyst.
• Senior FP&A Manager.
• LOCATION: Thailand - Pathumthani (Navanakorn).
• Expenses review to ensure that they are being recorded properly.
• Prepare and analyze financial plans, trends, and operating forecasts, etc.
• Product Cost report preparation and analysis.
• Prepare headcount report and analyze headcount movement.
• Develop KPIs and dashboards on financial results for the factory.
• Support the respective business leaders on delivering the annual operating plan and long-term plan, and how to drive a sustainable business financially.
• Work closely with internal teams on actions plans, forecasting, and planning.
• Ad hoc tasks.
• 5+ years of FP&A experience in MNCs. US listed company experience is preferred.
• Manufacturing process knowledge is preferred.
• Product Cost knowledge is preferred.
• Proficiency in Oracle ERP (SAP is acceptable), Microsoft Office Suite, etc. systems & tools, Tableau will be a plus.
• Business Result Oriented, Open minded, with excellent communication and interpersonal skills, being able to work with people from globe with diversified culture background.
• Continuous Improvement mindset, willing to take challenges to lead/participate in Kaizen projects.
• Bachelor's degree or above, major in Finance, Accounting, Business administration, Economics, etc. MBA is a plus.
• English as working language.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ทักษะ:

Enthusiastic

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Support production and engineer in daily basis.
• Training new operator.
• Routine FA and disposition.
• Control production to meet output target.
• Support engineering request, NPI.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Enthusiastic, Accounting, Taxation, CPA, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• This position plays a pivotal role on Lumentum Thailand Tax matters. This role will work seamless with the Corporate Tax team in developing and execution of the tax strategies, managing day to day tax tasks mainly but not limited to VAT, CIT, withholding tax, and duty, including tax compliance processes review and enhancement, tax com ...
• Develop and execution of tax strategies to best utilize BOI privilege.
• Tax Compliance including internal processes review, tax computations, tax reports and filing, answer TRD inquiries, etc.
• Transfer pricing arrangements, working closely with external professional support in this area and assisting business queries.
• Provide tax advice/support to business projects.
• Work with the revenue department to resolve any tax issues.
• Address any tax related inquiries/issues, both from internal and external.
• Leading Tax projects if any.
• Other tasks assigned by the management.
• Bachelor's degree in Accounting, Taxation, Economy, Law (CPA is preferred).
• 6 years+ of experience in tax advisory, and tax compliance.
• Experience from big 4 is a plus.
• Strong knowledge of all taxes, BOI knowledge is a plus.
• Business Result Oriented, Open minded, with excellent communication and interpersonal skills, being able to work with people from globe with diversified cultural background.
• Continuous Improvement mindset, willing to take challenges to lead/participate in Kaizen projects.
• English as working language.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Risk Management, Enthusiastic, Assurance, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Security monitoring and alert triage.
• Monitor Security Information and Event Management (SIEM), Endpoint Detection and Response (EDR), anti-malware, email security, web security and cloud security alerts.
• Validate, triage and prioritise security events using agreed playbooks, business impact and risk context.
• Create accurate incident records, preserve relevant evidence and escalate incidents through the agreed incident management process.
• Support containment, eradication and recovery activities under the direction of the incident owner.
• Incident response and operational support.
• Follow documented incident response procedures for malware, phishing, account compromise, data exposure, suspicious network activity and lost or stolen devices.
• Assist with post-incident actions, including evidence capture, timeline building, lessons learned and remediation tracking.
• Maintain security operations knowledge base articles and playbooks for repeatable response tasks.
• Vulnerability and configuration management.
• Run or support scheduled vulnerability scanning across servers, endpoints, network devices, applications and cloud services.
• Validate scan findings, remove false positives where evidence supports this, assign remediation tickets and monitor progress against agreed service levels.
• Support secure configuration checks against approved baselines, including endpoint hardening, logging configuration and privileged account controls.
• Provide clear remediation guidance to infrastructure, application and service teams.
• Identity, access, Data Loss Prevention and Multi-Factor Authentication.
• Support identity and access management processes, including joiners, movers, leavers, privileged access reviews and evidence collection for access recertification.
• Monitor and investigate Data Loss Prevention (DLP) alerts, applying agreed classification, privacy and escalation rules.
• Support Multi-Factor Authentication (MFA) administration, user enrolment, exception handling, break-glass access checks and failed authentication investigations.
• Assist with user access investigations where suspected compromise, misuse or policy breach is identified.
• Security controls and tooling.
• Operate security tools in line with documented procedures and change controls.
• Support maintenance of alert rules, watchlists, endpoint policies, email filtering rules and data protection controls under approved guidance.
• Record control issues, service defects and improvement opportunities.
• Carry out routine security checks for backup alerts, logging gaps, certificate expiry, secure configuration and monitoring coverage.
• Policy, compliance and assurance support.
• Gather evidence for audits, risk assessments, supplier checks and compliance reviews.
• Apply relevant internal policies, standards and data handling requirements.
• Support regular checks against security standards, control requirements and business processes.
• Identify policy exceptions or control gaps and raise them through the agreed risk management process.
• Awareness and stakeholder support.
• Provide practical security advice to users and technical teams.
• Support phishing exercises, security awareness activities and targeted communications.
• Explain security requirements in a clear, proportionate and helpful way.
• Promote secure behaviours, including reporting suspicious activity, protecting credentials and handling sensitive data correctly.
• Reporting and documentation.
• Maintain accurate incident, alert, remediation and evidence records.
• Prepare routine operational reports on alerts, incidents, vulnerabilities, Data Loss Prevention (DLP), Multi-Factor Authentication (MFA), control exceptions and remediation progress.
• Contribute to dashboards and management information using agreed metrics.
• Keep procedures, playbooks and technical notes up to date.
• Bachelor Degree in Computer Science, Information Technology, Cybersecurity, or related fields.
• At least 1-2 years of experience in IT governance, IT audit, risk, or compliance.
• Experience in cybersecurity risk assessment, threat modeling, control testing, or security governance.
• Good command of spoken and written in English.
• Strong analytical and problem-solving skills.
• Good documentation and report-writing abilities.
• Attention to detail and organizational skills.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ทักษะ:

Enthusiastic

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Support daily office operation.
• Managing Office suppliers.
• Generate report and organizing document.
• Issue PR to support Engineer and NPI PMO requirement.
• Issue MTS for NPI material transaction.
• Issue Work Order to support NPI build.
• Work with warehouse team to receive / issue material on time.
• Work with IQA team for inspection material to support production on time.
• Higher vocational degree or bachelor's degree.
• Experience in administrative tasks.
• Good communication skill.
• MS office is a must.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, Statistical Analysis, Product Development, Data Analysis, Enthusiastic, Electronics, Python, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• The Reliability Engineering Manager will establish and lead the manufacturing reliability function supporting the company's strategic optical communication and photonic product portfolio.
• This position is responsible for developing reliability strategies for both new product introductions (NPI) and manufacturing products, executing ongoing reliability testing (ORT), investigating failures, driving root cause analysis, and identifying opportunities to improve product and process robustness.
• The successful candidate will focus not only on reliability testing, but also on understanding failure mechanisms, analyzing data, identifying trends, designing experiments, and driving corrective actions across manufacturing, product engineering, quality, and reliability organizations.
• The role will initially build and lead a small reliability team while establishing the processes, and engineering discipline required to support both manufacturing and future business growth.
• Build and lead the Nava manufacturing reliability team capability.
• Develop reliability strategies supporting both new product introductions and manufacturing products.
• Own ongoing reliability testing (ORT) programs and support product qualification activities.
• Develop reliability test plans, schedules, reporting systems, and escalation processes.
• Analyze reliability data to identify trends, failure mechanisms, and emerging product or process risks.
• Lead root cause investigations using statistical analysis, Design of Experiments (DOE), and structured problem-solving methodologies.
• Partner with Product Engineering, Manufacturing Engineering, Quality, R&D, and Central Reliability teams to drive corrective and preventive actions.
• Identify reliability risks early in product development and drive mitigation activities before product release.
• Develop reliability strategies, qualification methodologies, and reliability requirements for new and existing product platforms.
• Recruit, develop, and mentor reliability engineers and technicians as the organization grows.
• Bachelor's or master's degree in engineering, Physics, Materials Science, Mechanical Engineering, Electronics, or a related technical discipline.
• Excellent written and spoken English communication skills.
• 8+ years of engineering experience with at least 3 years leading reliability, qualification, quality, manufacturing, or related engineering teams.
• Strong understanding of reliability methodologies accelerated testing, failure analysis, statistical analysis, and reliability data interpretation.
• Demonstrated experience conducting DOE studies and translating findings into product or manufacturing improvements.
• Experience in electronics, semiconductor, optical, storage, automotive, industrial, or other high-volume manufacturing environments.
• Strong knowledge of materials, mechanical reliability, manufacturing processes, and failure mechanisms.
• Demonstrated ability to build engineering capability, influence cross-functional teams, and mentor technical staff.
• Preferred Experience.
• Ownership of manufacturing reliability, product reliability, ORT, qualification, or reliability growth programs.
• Experience supporting products through development, qualification, manufacturing ramp, and volume production.
• Experience with optical communication products, semiconductor packaging, optoelectronics, photonics, datacenter hardware, storage devices, or other high-reliability electronic products.
• Experience with reliability data analysis using JMP, Minitab, Python, R, Weibull++, or equivalent tools.
• Experience working across multiple international engineering and manufacturing sites.
• Experience developing reliability laboratories, test infrastructure, measurement systems, or reliability processes.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Enthusiastic, Accounting

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Create and monitor a system of controls, procedures, and forms for the recording of fixed assets.
• Track the compilation of project costs into fixed asset accounts, and close out those accounts once the related projects have been completed.
• Work closely with the other departments in tracking project costs in comparison to their budgeted projections.
• Conduct periodic reviews of the fixed asset schedule to determine dispositions.
• Reconcile the balance in the fixed asset subsidiary ledger to the general ledger.
• Run depreciation for all fixed assets.
• Prepare audit schedules relating to fixed assets, and assist the auditors in their inquiries.
• Review and preparation of monthly financial statements.
• Reconcile specific general ledger accounts.
• Assist in the preparation of budgets.
• Communicate with co-workers, management and clients in a courteous and professional manner.
• Reporting for work in a timely manner when scheduled.
• 5+ years of fixed asset accounting experience. Bachelor's degree in accounting preferred. Must be detail oriented.
• Good knowledge and strong experience of fixed assets and General Ledge.
• Good knowledge of Generally Accepted Accounting Principles (GAAP).
• Proficiency in Excel and Ability to apply several accounting and reporting systems.
• Good in communication and analytical skills.
• Ability to work individually or in a team setting.
• Excellent interpersonal and time management skills to meet time-sensitive deadlines.
• Strong ability to give attention to detail and to perform multiple tasks at the same time.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Project Management, Problem Solving, Enthusiastic, Electronics, Automation, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Position: Production Training Manager.
• Location: Lumentum Thailand, Navanakorn - Pathum Thani.
• Department: Productions.
• Reports To: Senior Director, Operations.
• Position Summary.
• We are seeking an experienced and passionate Manufacturing Training Manager to lead the development, implementation, and continuous improvement of training and workforce capability programs across our manufacturing operations.
• This role is responsible for ensuring employees possess the technical, operational, quality, safety, and compliance competencies required to support business objectives, manufacturing excellence, and operational readiness. The Manufacturing Training Manager will partner closely with Operations, Engineering, Quality, EHS, HR, and Production leaders to build a high-performance learning culture while driving workforce development, compliance training, and skills enhancement initiatives.
• The ideal candidate will have strong experience in manufacturing training, learning and development, competency management, instructional design, and organizational capability building within a fast-paced manufacturing environment.
• Training Strategy & Workforce Capability Development.
• Develop and execute the manufacturing training strategy aligned with business goals and operational requirements.
• Establish and maintain training frameworks, competency matrices, certification programs, and employee development pathways.
• Partner with Operations leadership to identify workforce capability gaps and implement development plans.
• Lead workforce upskilling and reskilling initiatives to support business growth and operational transformation.
• Drive a culture of continuous learning and employee development throughout the organization.
• Training Program Management.
• Design, develop, implement, and evaluate manufacturing training programs for operators, technicians, supervisors, and leaders.
• Manage onboarding, orientation, technical skills, cross-training, and certification programs.
• Ensure training content remains current, effective, and aligned with operational requirements.
• Coordinate training schedules and resources to support production demands while minimizing operational disruption.
• Measure training effectiveness and implement continuous improvements based on feedback and business outcomes.
• Technical & Operational Training.
• Partner with Engineering, Quality, and Manufacturing teams to develop technical training programs and work instruction certifications.
• Support new product introduction (NPI), process changes, automation projects,and technology deployment through effective training programs.
• Ensure employees are qualified and certified to perform assigned tasks and manufacturing processes.
• Support knowledge transfer and best practice sharing across manufacturing functions.
• Compliance, Quality & Safety Training.
• Ensure compliance with company policies, regulatory requirements, customer expectations, and industry standards.
• Manage training programs related to EHS, Quality Systems, ISO standards, Responsible Business Alliance (RBA), and other compliance requirements.
• Maintain training records, certification status, and audit-ready documentation.
• Support internal and external audits and ensure timely closure of training-related findings.
• Promote a strong culture of safety, quality, ethics, and compliance.
• Learning Systems & Training Administration.
• Manage Learning Management Systems, training databases, competency tracking, and certification records.
• Develop dashboards and reports to monitor training effectiveness, compliance status, and workforce readiness.
• Ensure training documentation is accurate, standardized, and maintained according to company requirements.
• Utilize data analytics to identify trends and improvement opportunities.
• Leadership & Team Management.
• Lead, coach, and develop the manufacturing training team.
• Build strong partnerships with Operations, Engineering, Quality, HR, and site leadership teams.
• Support talent development, succession planning, and leadership development initiatives.
• Drive employee engagement through learning and development programs.
• Foster a culture of accountability, collaboration, innovation, and continuous improvement.
• Continuous Improvement & Organizational Development.
• Drive continuous improvement initiatives related to workforce capability, training efficiency, and learning effectiveness.
• Implement best practices in adult learning, instructional design, and manufacturing training methodologies.
• Support Lean Manufacturing, Kaizen, and operational excellence initiatives through capability-building programs.
• Benchmark training programs against industry best practices and recommend improvements.
• Bachelor's degree in Engineering, Industrial Management, Organizational Development, or related field.
• Minimum 8-10 years of experience in training, learning & development, workforce capability, or manufacturing training environments.
• Minimum 3-5 years of leadership experience managing training teams or learning functions.
• Experience in electronics manufacturing, semiconductor, optical, automotive, or high-tech manufacturing environments is preferred.
• Strong understanding of manufacturing operations, technical training systems, competency management, and adult learning principles.
• Experience supporting ISO, RBA, EHS, and quality compliance training requirements.
• Experience with Learning Management Systems, training databases, and learning technologies.
• Strong project management, communication, facilitation, and stakeholder management skills.
• Good command of English communication.
• Preferred Competencies.
• Learning & Development Leadership.
• Manufacturing Training & Workforce Capability Development.
• Adult Learning & Instructional Design.
• Leadership & Team Development.
• Change Management.
• Stakeholder Management.
• Compliance & Audit Readiness.
• Continuous Improvement & Operational Excellence.
• Data Analytics & Training Effectiveness Measurement.
• Strategic Thinking & Problem Solving.
• Working Conditions.
• Work in both office and manufacturing production environments.
• Regular interaction with production employees, supervisors, engineering teams, and site leadership.
• May require flexibility to support multiple shifts and training activities based on operational needs.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ทักษะ:

Enthusiastic

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Role and Responsibility.
• Co-ordinate with the engineers, training supervisors, Production supervisors, and other concerns to review and update the training materials for specific processes and stations.
• Conduct training and evaluation to certify/recertify employees.
• Perform on-the-job training for employees and ensure they are qualified for their jobs.
• Training and monitoring (e.g. - Training material, OJT Training period etc.) employees at their workstation.
• Provide details and training recommendations to employees within the organization so that employees receive appropriate knowledge and skills to perform their duties.
• Required Qualification.
• Vocational Certificate degree in any field.
• Good human relations, enthusiastic about work, and can learn new tasks well.
• Can work under pressure.
• Be a mentor to operators and have a service Mind.
• Able to use basic computer programs well such as Window office.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Enthusiastic, Electronics, ERP

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!.
• We are looking for a strong, people-focused, and detail-oriented.
• Production Supervisor.
• to lead frontline manufacturing operations in Lumentum's high-precision global production environment. This role is responsible for managing daily production activities, ensuring output targets are achieved, maintaining quality and safety standards, and developing operators to perform at high levels. The Production Supervisor works closely with Manufacturing Engineering, Quality, Planning, and Warehouse teams to ensure smooth production flow, resolve operational issues, and support continuous improvement. This position may require managing.
• rotating shifts.
• based on operational needs.
• Lead and supervise production operators to ensure daily output, quality, and schedule adherence goals are achieved.
• Plan and allocate manpower by shift, ensuring optimal coverage for all production stations and equipment.
• Monitor production WIP, line performance, cycle time, and bottlenecks; drive actions to meet production and customer targets.
• Ensure strict compliance with SOPs, process controls, ESD, safety, and cleanroom standards during all production activities.
• Collaborate with Process Engineering (PE), Quality Engineering (QE), and Equipment teams to resolve production issues, process deviations, or equipment downtime.
• Support NPI and engineering builds by coordinating manpower, training operators, and ensuring process readiness.
• Conduct real-time line audits, quality checks, and operator performance observations to prevent quality escapes.
• Provide coaching, training, and skill development for operators to improve competency, productivity, and flexibility.
• Maintain shift documentation including production reports, attendance, incident logs, and abnormality reports.
• Drive 5S, Kaizen, cost reduction, and continuous improvement initiatives in the production area.
• Ensure proper material, tooling, and fixture readiness by coordinating with Warehouse, Planning, and Engineering teams.
• Participate in daily/weekly production meetings and communicate shift performance, issues, and recovery plans.
• Escalate critical issues promptly and coordinate corrective actions to minimize production impact.
• Perform additional responsibilities or tasks assigned by the Manager.
• Bachelor's degree in Engineering, Industrial Technology, Manufacturing, Science, or a related field (Diploma/Vocational + strong experience may also be considered).
• 3-8 years of experience in high-tech, electronics, semiconductor, optical, or precision manufacturing.
• Minimum 2+ years in a leadership or supervisory role managing production teams.
• Strong understanding of manufacturing processes, WIP control, quality standards, and production metrics.
• Experience working in cleanroom, optical, or high-precision environments is an advantage.
• Strong leadership, communication, and coaching skills with the ability to guide and motivate teams.
• Ability to work.
• rotating shifts.
• and support fast-paced, high-volume production environments.
• Problem-solving mindset with the ability to analyze issues, drive root cause containment, and implement improvements.
• Proficiency in basic computer applications (Excel, Word, ERP systems).
• Commitment to safety, quality, and continuous improvement.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ทักษะ:

Problem Solving, Enthusiastic, Electronics, Automation, Teamwork

ประเภทงาน:

ฝึกงาน

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• The Engineering Intern will be part of Lumentum's internship program designed to provide meaningful hands-on experience, professional exposure, and career development. Interns will support engineering teams on real projects, engage with cross-functional stakeholders, and gain insight into global high-tech operations and manufacturing ...
• The program welcomes students currently pursuing Bachelor's, Master's, or PhD degrees and aims to build skills through structured work assignments, mentorship, and learning opportunities.
• Support engineering activities and project tasks under guidance.
• Assist with data collection, analysis, and reporting.
• Participate in process improvement, workflows, and standard work updates.
• Contribute to operational excellence initiatives and engineering problem solving.
• Work collaboratively with cross-functional teams (e.g., Production, Quality, EHS).
• Prepare professional documentation and presentations.
• Follow company safety, quality, and standard procedure.
• Note:* Responsibilities may vary based on the assigned engineering area (e.g., process, automation, photonics, industrial, electrical, software, or systems).
• Who We're Looking For.
• Currently enrolled in a Bachelor's, Master's, or PhD program in Engineering or related disciplines (e.g., Photonics, Electronics, Telecom, Mechatronics,Mechanical, Electrical, Industrial, Manufacturing, Mechatronics, Physics, Science, EHS, etc.).
• Open to final-year students as well as postgraduate candidates.
• Strong willingness to learn and contribute.
• Basic understanding of engineering or technical concepts.
• Good written and verbal communication skills.
• Teamwork and professional attitude.
• Problem-solving mindset and analytical ability.
• Interest in manufacturing and high-tech environments.
• Ability to organize and present data effectively.
• Program Benefits & Experience.
• Gain meaningful professional experience with exposure to real engineering work.
• Work directly with experienced engineers and technical leaders.
• Participate in activities that encourage learning and broad industry exposure.
• Build professional network and career foundation within a global technology company.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ทักษะ:

Microsoft Office, Enthusiastic, Electronics, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Responsible for Production and Operation control and coordinate activities in manufacturing to achieving total customer requirement.
• Supervise and manage production operator performance in order to improve working efficiency.
• Understands procedure and Production control to support build plan.
• Build plan,Product and operation output (part and products quantity, Scarp and production inventory Control).
• Manage and motivate subordinate to establish the process and improvement products.
• Required.
• Bachelor Degree,Any flied.
• 2- 5 years work experience in Production.
• Production Supervise level, work experience in the optical and/or electronics manufacturing company is preferable.
• Work experience with operation and production control.
• Able to work both day and night shift.
• Good communications skills, both written and verbal in English.
• Computer program skill (Microsoft office, excel, word basic) and production shopfloor management system.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Enthusiastic, Oracle, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Reporting to Manager to drive RMA with all cross functions start from receiving the RMA till ship back to customer and ensure the RMA is closed properly.
• Work closely with internal team on requirement for RMA orders to plan, schedule and completion of RMAs.
• Create RMA 8D report in Agile, providing all requested information to FA owner and monitor RMA processing within internal team.
• Update RMA schedule and status in Oracle on target completion date, tracking information for customer and internal communication.
• Schedule RMA sales order in Oracle and communicate with CSP and other related function to resolve any issues concerning the requirement.
• Updates databases and prepares appropriate paperwork.
• Escalation of issues to ensure RMA's keep moving forward and do not halt for long periods.
• Focal point for ensuring that all RMAs are tracked, providing status updates, following through to timely to meet customer expectation and satisfaction.
• Required Qualification.
• Bachelor's Degree in any related field.
• Minimum 5 years of experience in electronic or optical manufacturing environment preferred.
• Strong collaboration with cross functional team.
• Good command in English communication reading, writing, and speaking.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Software Development, Enthusiastic, Python, Oracle, Java, .NET, SQL, C#, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Design and develop software Utilize programming tools (C#,.NET, Java Script, Type Script, Angular, Python) for develop diverse custom application to support users in R&D and manufacturing.
• Develop and design software to convert legacy data format to the company standard data format.
• Database design and utilize database language PL/SQL to develop backend applications.
• Collaborate closely with business SME's, R&D, Product engineer and Test Engineer to provide software solutions.
• Convert legacy software code into modern and latest technology.
• Understand, maintain and improvement of existing variety custom applications.
• Communicate with another team in Overseas.
• Provide problem-solving solutions including complex and time-sensitive problems where erroneous results could have a significant impact on daily operations and product shipments.
• Familiar with documentation, code/design reviews, change management to ensure the delivery of quality solutions.
• Offer support to other team members and be a mentor.
• At least 3 years' software development experience, manufacture related IT system is preferred.
• Strong experience and skill set required in any of the (or more) areas below,.
• Hands on experience with software development in.Net, C# environment OR.
• Hands on experience with database design for Oracle database or Microsoft Sqlserver OR.
• Experience with PL/SQL, Stored procedure and package creation.
• Excellent English oral/written/presentation skills.
• Ability to work under pressure and easily adapt in a fast-paced environment.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Enthusiastic, Accounting, ERP, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• DAILY, WEEKLY AND MONTHLY OPERATION.
• Review expenses and accruals to ensure accurate booking.
• Prepare month-end closing and balance sheet reconciliation for USGAAP ledger.
• TAX REPORTING.
• Prepare documents and reports related to VAT refund and tax related.
• STATUTORY REPORTING.
• Prepare monthly statutory balance sheet reconciliation.
• Assist senior accountant to provide documents and reports requested by the auditors during the audit process.
• Bachelor's degree in Accounting, Finance or a related field.
• Minimum 2-3 years of experience in accounting.
• Good command in reading and writing English.
• Good computer skills, including MS office and ERP system.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ทักษะ:

Microsoft Office, Enthusiastic

ประเภทงาน:

ฝึกงาน

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Assist with research, analysis, and preparation of reports or presentations.
• Support the team in daily administrative tasks and project execution.
• Participate in department meetings and contribute ideas and feedback.
• Engage in specific projects, providing innovative solutions to improve departmental outcomes.
• Learn and apply industry-specific software and tools relevant to your department.
• Collaborate with other interns and team members on cross-functional projects.
• Perform additional tasks or projects as assigned, tailored to the intern's interests and career goals.
• Current enrollment in an undergraduate or graduate program related to Engineering.
• Strong academic record and a demonstrated interest in optical communication.
• Excellent analytical, problem-solving, and critical thinking skills.
• Effective communication and interpersonal abilities.
• Ability to work collaboratively in a team environment as well as independently.
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint); familiarity with [any additional software relevant to the department] is a plus.
• Eagerness to learn and adapt in a fast-paced environment.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Quality Assurance, Enthusiastic

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• Quality Technician: Performs functions associated with quality control and quality assurance operations, including working with engineers in set-up and calibration tasks and carrying out rework and quality assurance procedures related to production or operations.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Cloud Computing, Data Analysis, Enthusiastic, Electronics, Assembly

ประเภทงาน:

งานประจำ

• Serve as the Test Engineer for assigned products, owning test strategy, coverage, and execution.
• Define, develop, and maintain manufacturing and reliability test plans, test specifications, and test coverage requirements.
• Act as the primary technical owner for test-related issues and escalations.
• Reliability & Validation Engineering.
• Plan and execute reliability testing to validate product robustness against environmental, mechanical, and operational stress conditions.
• Analyze test and reliability data to identify failure trends and improvement opportunities.
• Support Design for Testability and Reliability (DfT / DfR) in collaboration with R&D and Product Engineering.
• New Product Introduction (NPI) & Lifecycle Support.
• Execute product engineering activities for NPI, product transfer, and production ramp.
• Support Design for Manufacturability, Assembly, Test, and Reliability in collaboration with R&D and Process Engineering.
• Support product qualification, documentation release, and engineering change management.
• Yield, Quality & Cost Performance.
• Support analysis and improvement of product yield, performance, and quality metrics.
• Participate in root cause analysis and corrective actions for product-related manufacturing and field issues.
• Contribute to cost reduction initiatives through product optimization and engineering changes.
• Cross-Functional & Global Collaboration.
• Collaborate with local and global engineering teams to support product readiness and execution.
• Communicate technical status, risks, and data-driven recommendations to stakeholders.
• Support alignment across functions to ensure smooth manufacturing execution.
• Safety, Health & Environmental (EHS) Responsibility.
• Comply with all EHS policies, procedures, and standards.
• Actively support EHS initiatives and continuous improvement actions.
• Promote safe work practices and contribute to a Zero Accident Culture.
• Bachelor's degree in Engineering (Electrical, Mechanical, Optical, Physics, or related field); Master's preferred.
• 6-10+ years of experience in test engineering or reliability engineering within high-tech manufacturing environments.
• Strong hands-on experience in manufacturing test development, execution, and data analysis.
• Experience supporting reliability testing, qualification, and validation activities.
• Background in optical, photonics, semiconductor, or electronics manufacturing is strongly preferred.
• Strong analytical, problem-solving, and documentation skills.
• Effective communication skills in English and ability to work in a global team environment.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Microsoft Office, Enthusiastic, English

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.*.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!*.
• EHS Coordinator.
• Lumentum (NASDAQ: LITE) is a market-leading manufacturer of innovative optical and photonic products enabling optical networking and commercial laser customers worldwide. Lumentum's optical components and subsystems are part of virtually every type of telecom, enterprise, and data center network. Lumentum's commercial lasers enable advanced manufacturing techniques and diverse applications including next-generation 3D sensing capabilities. Lumentum is headquartered in Milpitas, California with R&D, manufacturing, and sales offices worldwide.
• For more information, visit www.lumentum.com.
• Lumentum is an Equal Opportunity Employer, EOE/Minorities/Females/Veterans/Disability.
• Work directly with Global EHS team to manage and support on EHS information update, database monitoring and tracking as below.
• Velocity: Chemical management platform.
• Work as system admin to monitor platform and support user request.
• Monitor new chemical registration and SDS.
• Workday: Training management platform.
• Work as system admin to upload training content into platform.
• Tracking EHS training record from each site and upload into platform.
• Generate training report for each site.
• Ideagen: Incident and audit management platform.
• Work as system admin to monitor platform and support user request.
• Generate incident and audit report for global team.
• To be point of contact between representative of each site and CB (Certified Body) for monitoring, planning, and working on ISO14001 and ISO45001 audit for each site. Provide document management, shared folder and intranet maintenance and support to Global Team. Support local team (Nava EHS) on below task.
• Support PR&PO process.
• Support EHS training tracking and update.
• Support PPE stock monitoring and tracking.
• Support Waste shipment process and document tracking.
• Support on emergency response drill.
• Other assignments from Global EHS and Nava EHS team.
• Bachelor's degree in any field. 2 - 3 years of experience in admin role. Good command of English in both oral and written communication skills Have experience and knowledge in management system standard e.g. ISO14001, ISO45001 (OHSAS18001) and EHS will be an advantage. Able to work independently and team environment. Flexibility to support company in urgent case. Have good communication skill and ability to handle multiple tasks with sense of urgency. Proficiency in computer skill e.g. Microsoft Office, email and etc. Experience with data visualization tools would be an asset.
• We are an equal opportunity employer and value diversity at our company. *.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. *.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. *.
• Please contact us to request accommodation.*.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Product Development, Project Management, Data Analysis, Enthusiastic, Procurement, Electronics

ประเภทงาน:

งานประจำ

• Capacity Ramp Management.
• a. Lead factory capacity ramp planning and execution to support production demand.
• b. Develop ramp schedules, resource plans, and recovery actions.
• c. Monitor capacity utilization, bottlenecks, and output performance.
• d. Coordinate line readiness, equipment installation, qualification, and staffing plans.
• e. Drive ramp readiness reviews with stakeholders.
• Program & Project Management.
• a. Manage end-to-end program timelines, milestones, and risks.
• b. Track project deliverables and ensure execution aligns with business goals.
• c. Lead cross-functional meetings and action follow-ups.
• d. Escalate critical issues and drive closure plans.
• e. Support business continuity and contingency planning.
• Manufacturing & Operations Coordination.
• a. Work closely with production, IE, ME, PE, and facilities teams.
• b. Coordinate factory layout changes and production line setup.
• c. Support productivity improvement and cycle time reduction initiatives.
• d. Ensure smooth transition from NPI to mass production.
• Supply Chain & Material Readiness.
• a. Coordinate with supply chain and procurement teams on material readiness.
• b. Monitor shortages, long lead-time items, and supplier risks.
• c. Align build plans with component availability.
• Quality & Process Control.
• a. Ensure ramp activities comply with quality requirements.
• b. Support yield improvement and process stabilization during ramp.
• c. Coordinate corrective actions for production or quality issues.
• Stakeholder Communication.
• a. Provide regular project status updates to management and global teams.
• b. Prepare presentations, dashboards, and ramp reports.
• c. Communicate risks, mitigation plans, and key decisions clearly.
• B.S. in an engineering, operation or related field plus.
• 5+ years of experience in managing complex product development or operations in electronics, Semiconductors or Opticals manufacturing.
• Experience managing cross-functional projects in a manufacturing environment.
• Experience with NPI ramp and mass production transfer is preferred.
• Strong data analysis and reporting skills.
• Excellent communication skills in verbal, written, and presentation formats.
• High level of integrity, work ethic, responsiveness, and commitment to continuous improvement.
• Ability to travel as required/possible to coordinate projects and build relationships with the larger international development teams.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Financial Analysis, Microsoft Office, Enthusiastic, Accounting, Tableau, Oracle, SAP, ERP, English

ประเภทงาน:

งานประจำ

• Full Product Cost Model Ownership.
• Independently prepare, maintain, and control complete Excel-based product cost models for approximately 5-10 product lines.
• Maintain a consistent model structure with clear assumptions, formulas, source references, and version history.
• Coordinate with data owners and actively follow up on incomplete or inconsistent information; do not rely on passive data collection.
• Ensure each model is complete, accurate, reviewed, and ready for the required business milestone or management review.
• NPI Costing and Gate Reviews.
• Prepare product cost models and cost roadmaps for NPI gate reviews.
• Analyze changes versus target, prior model versions, and approved assumptions; explain key drivers, risks, and opportunities.
• Partners with R&D, Manufacturing Engineering, GCM, and other teams to identify cost-improvement opportunities and quantify their financial impact.
• Mass-Production Cost Roadmaps.
• Prepare and maintain cost roadmaps for mass-production products.
• Update model assumptions and expected cost changes based on approved BOM, HPU, yield, and other relevant business inputs.
• Provide a clear view of current cost, expected future cost, timing, and remaining gaps to target.
• Cost Simulation and Scenario Analysis.
• Perform product cost simulations for BOM changes, HPU changes, yield improvement, and other approved scenarios.
• Compare alternatives and quantify the cost impact by product and product line to support management decisions.
• Actual Cost, Variance, and Savings Analysis.
• Analyze variance between actual product cost and the approved cost model or roadmap.
• Identify the main cost drivers and clearly explain whether the variance is caused by assumptions, timing, data, or execution gaps.
• Track cost-improvement initiatives and cost-saving realization; validate that reported savings are supported by actual results.
• FTA and Management Support.
• Prepare model, form and supporting analysis for Free Trade Agreement (FTA) applications.
• Provide management-ready summaries, recommendations, and ad hoc financial analysis as required.
• Manage priorities and deadlines across multiple product lines while maintaining accuracy and documentation quality.
• Expected Deliverables and Measures of Success.
• Complete, accurate, and on-time cost models for all assigned product lines.
• Clear and traceable assumptions, source data, formulas, model versions, and supporting documentation.
• Reliable cost roadmaps, scenario analyses, and variance bridges that management can use for decisions.
• Timely identification and communication of cost risks, opportunities, data gaps, and required actions.
• Demonstrated ownership: the analyst independently drives the model to completion rather than only collecting or compiling inputs.
• Bachelor's degree or above in Finance, Accounting, Business Administration, Economics, or a related field. An Engineering background is also acceptable; an MBA is a plus.
• At least 5 years of relevant working experience, including product cost accounting or product costing experience in a multinational manufacturing company. Experience with a U.S.-listed company is preferred.
• At least 3 years of hands-on product costing experience.
• Advanced Microsoft Excel modeling capability is essential. The role requires the ability to build, maintain, audit, and explain complex manually managed cost models, not only operate an automated costing system.
• Good knowledge of manufacturing processes and the ability to translate technical and operational inputs into financial cost impact.
• Proficiency in Oracle ERP; SAP experience is acceptable. Strong Microsoft Office skills are required, and Tableau experience is a plus.
• Ability to manage multiple priorities and deliverables across approximately 5-10 product lines.
• English proficiency sufficient to work effectively with global teams from diverse cultural backgrounds.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.