เงื่อนไขการค้นหา

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ทักษะ:

English

ประเภทงาน:

งานประจำ

• Important] As an SES (System Engineering Service) engineer, you will be assigned to work on-site at a client company (a Japan-affiliated system integrator).
• Understanding customer business objectives and translating them into technical solutions.
• Implement the new network configuration and parameters received from the design team by configuring them on the actual devices.
• Read and interpret parameter sheets, create configuration, install operations, and prepare related documentation such as operation plans, time schedules, and work reports.
• Work Location: Mainly in Our CUSTOMER Office (Bangkok - BTS Pholenchit Station).
• Work Time: Monday - Friday: 8.30-17.30 *depend on our CUSTOMER schedule.
• Thai nationality only.
• Daily conversation level for both written and spoken English.
• Foundation/Associate degree or above in Computer Engineering, Computer Sciences or related field.
• Experience 3 years or more in IT infrastructure networking (Implement, Design).
• Experience with configuring and install network devices such as Cisco, Fortinet, Yamaha, and Aruba products. *not inculde design.
• Strong understanding and practical knowledge of TCP/IP, OSPF, BGP, VLAN, STP, and other essential network protocols.
• Able to do on-site support and travel up-country.
• Able to deal with difficult situation and working under time constraints.
• Passionate in learning new technology.
• Good team player.
• Service minded with excellent communication and coordination skills, positive attitude, proactive and willing to learn with multi-tasking skills.

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ทักษะ:

Good Communication Skills, Thai

ประเภทงาน:

งานประจำ

• ดูแลและรับผิดชอบยอดขายผลิตภัณฑ์ตามที่ได้รับมอบหมาย.
• ติดต่อประสานงานกับลูกค้าได้เป็นอย่างดี.
• เข้าพบปะ เยี่ยมเยียนลูกค้าอย่างสม่ำเสมอ.
• สามารถวิเคราะห์- ประเมินผลข้อมูลและงานที่ได้รับมอบหมายได้.
• สามารถปฏิบัติงานเป็นทีม..
• วุฒิศึกษาระดับปริญญาตรี ไม่จำกัดสาขา.
• เพศชาย อายุ 22-29 ปี ไม่จำเป็นต้องมีประสบการณ์ทำงาน.
• มีความสนใจงานด้านการขาย.
• บุคลิกดี มีทักษะการสื่อสารและการนำเสนอที่ดี.
• สามารถใช้โปรแกรม Microsoft Office ได้.
• มีใบขับขี่.
• มีรถไฟฟ้าให้ใช้ในงาน.
• สามารถปฏิบัติงานต่างจังหวัดเป็นประจำได้.

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ทักษะ:

Negotiation, Thai, English

ประเภทงาน:

งานประจำ

• Present and sell commercial and industrial washing machines, dryers, and related laundry equipment..
• Develop new customers and maintain relationships with existing clients such as laundromat investors, hotels, hospitals, factories, and commercial laundries..
• Provide professional consultation on machine selection, shop layout, and laundry solutions..
• Prepare quotations, negotiate terms, and close sales deals..
• Coordinate with technical, installation, and after-sales service teams..
• Follow up on order status, delivery, and customer satisfaction..
• Prepare sales reports and update customer information..
• Visit customers on-site and attend exhibitions or trade shows when required..
• __________________________________.
• Strong communication, negotiation, and closing skills..
• Self-motivated, target-driven, and able to work under pressure..
• Own a car and able to travel upcountry when required..
• Basic computer skills (Line, Excel, Google Docs, Email)..
• __________________________________.
• Compensation & Benefits.
• Basic salary.
• Commission (uncapped, based on sales performance).
• Travel and phone allowance (as per company policy).
• Social Security.
• Performance bonus.
• Product and sales training provided.
• Work Style & Career Growth.
• Proactive sales role (Active / Hunter Sales).
• High income opportunity based on performance.
• Career growth to Senior Sales or Sales Manager.

ประสบการณ์:

ไม่จำเป็นต้องมีประสบการณ์ทำงาน

ประเภทงาน:

งานประจำ

• ตรวจสอบและควบคุมคุณภาพวัตถุดิบก่อนเข้าสู่กระบวนการผลิต.
• วิเคราะห์และทดลองตัวอย่างในห้อง lab พร้อมบันทึกผลและจัดทำรายงาน.
• ประสานงานกับทีมผลิต เพื่อให้ค่าทดลองสามารถนำไปใช้งานจริงได้.
• ควบคุมคุณภาพกระบวนการผลิตให้เป็นตามมาตราฐาน.
• สนับสนุนงานพัฒนาวัสดุทนไฟและอิฐประดับ.
• ดูแลและบำรุงรักษาอุปกรณ์ทดลองในห้อง lab.
• สอบเทียบเครื่องมือวัดพื้นฐานตามกำหนด.
• ปริญญาตรี วิศวกรรมวัสดุ วัสดุศาสตร์ หรือสาขาที่เกี่ยวข้อง.
• ยินดีรับนักศึกษาจบใหม่.
• มีความละเอียด รอบคอบ ชอบงานทดลอง และพร้อมพัฒนาตัวเอง.
• ทำงานร่วมกับผู้อื่นได้ดี และประสานงานได้คล่อง.
• ทัศนคติเชิงบวก มุ่งมั่นเรื่องคุณภาพ.
• หากมีความรู้พื้นฐานด้าน ESG จะได้รับการพิจารณาเป็นพิเศษ.
• ด้านสุขภาพ และ Wellness.
• ประกันสุขภาพ.
• ตรวจสุขภาพประจำปี.
• การเงิน.
• โบนัส.
• การปรับเงินเดือนประจำปี.
• การสนับสนุนค่าครองชีพ.
• ที่พักอาศัย.
• ชุดพนักงาน.
• การพัฒนาและสวัสดิการครอบครัว.
• การฝึกอบรมและพัฒนาทักษะ.
• สวัสดิการเพื่อใช้จ่ายในด้านสุขภาพและพัฒนาตนเอง (Flexi Benefit).
• โอกาสในการไปดูงานในต่างประเทศ.
• เงินช่วยเหลือเมื่อคลอดบุตร / แต่งงาน / งานศพ.
• สิทธิลาในเดือนเกิด 1 วัน.
• ทุนการศึกษาสำหรับบุตรเรียนดี.

ประเภทงาน:

งานประจำ

• Oversee all aspects of the data center's critical physical infrastructure. Ensure that all work performed within the space is done to high quality and without impact to internal/external customers.
• Manage teams of 24x7 engineering technicians to support and operate data center facilities.
• Engage in improvement projects, often requiring reaching out to a variety of support teams, and drive them from conception to completion.
• Coordinates daily with a multitude of third party vendors ensuring adherence to contracted SLAs.
• Effectively and efficiently manage the operations budget and expenditures.
• Routinely operate as the afterhours on-call Data Center Facility Manager for the data centers in the region. This will include responding to any issues within the data centers and managing the investigation, mitigation, and recovery of the issue(s).
• BASIC QUALIFICATIONS.
• Experience in facilities and/or construction management, demonstrating progressive responsibility and growth within the facilities/construction industry.
• Have strong facilities management experience.
• Ability to conduct financial business case analysis / translate information into useful formats and draw conclusions.
• Experience building and manage budgets.
• Familiarity with business process documentation and improvement.
• Ability to lead negotiations, and manage high level meetings and discussions.
• Proven track record of taking ownership and successfully delivering results in a fast-paced, dynamic environment.
• Excellent listening, verbal, written, and skills.
• PREFERRED QUALIFICATIONS.
• Strong verbal and written communication skills.
• Strong organizational skills.
• High attention to detail including precise and effective customer communications and proven ability to manage multiple, competing priorities simultaneously.
• Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you re applying in isn t listed, please contact your Recruiting Partner.

ประเภทงาน:

งานประจำ

• We are inviting applications for the position of Senior R&D Engineer / Scientist in our Resin for Paint and coating division. The ideal candidate will be responsible for leading the development and improvement of coating and resin systems with a focus on quality, innovation, sustainability, and regulatory compliance. This is a leadership role requiring a deep understanding of polymer science, surface chemistry, and coating applications across various industries.
• Lead and execute complex R&D projects from concept to commercialization.
• Lead formulation and development of advanced paints, resins, and coatings, including water-based, solvent-based, and hybrid systems as well as the low VOC products.
• Innovate and optimize product formulations for enhanced performance, cost-effectiveness, and environmental compliance (e.g., low-VOC, eco-friendly technologies, Green Label, LEED).
• Ensure compliance with company policies, safety standards, and regulatory requirements.
• Plan and execute laboratory experiments, analyze results, and provide actionable insights or prototypes to validate new technologies.
• Evaluate new raw materials, resins, pigments, additives, and suppliers.
• Collaborate with cross-functional teams (production, QC, sales, marketing, and procurement) to support scale-up, troubleshooting, and commercialization.
• Ensure adherence to applicable industry standards and regulatory guidelines (e.g., VOC regulations, LEED, Green Label, ISO etc.).
• Generate and maintain all relevant technical documentation, test reports, and formulation records.
• Provide technical support to customers and internal stakeholders, including training and troubleshooting.
• Mentor junior R&D staff and interns and contribute to knowledge-sharing within the team to enhance their technical knowledge and skill.
• Monitor emerging trends and technologies in coatings and resin systems to support long-term R&D strategy and business strategy.
• Manage timelines, budgets, and resource allocation for assigned projects..
• M.Sc./M.Tech/Ph.D. in Polymer Science, Chemical Engineering, Surface Coating Technology, Organic Chemistry, or a related discipline.
• Minimum 20 years of R&D experience in the paint, coatings, or resin manufacturing industry, preferably in a senior or leadership capacity.
• Strong expertise in formulation chemistry of various coatings: architectural, industrial, automotive, protective, etc.
• Hands-on experience with analytical and performance testing equipment (e.g., viscometer, spectrophotometer, gloss meter, FTIR, DSC, TGA).
• Knowledge of resin synthesis and polymerization techniques is a plus.
• Excellent problem-solving, project management, and analytical skills.
• Strong communication (verbal and written) for internal reporting and external collaboration.
• Leadership skills with the ability to mentor and develop junior staff.
• Experience in low-VOC, water-based systems, or bio-based coatings.
• Exposure to patent filing, technical papers, or international formulation standards.
• Familiarity with SAP, LIMS, or digital R&D systems.
• This position is based at TOA Paint (Thailand) Public Company Limited, Head Office. Working hours: 5.5 days / Monday to Friday, with every other Saturday and Sunday off.
• Interested applicants are requested to send their English resume to.
• [email protected], [email protected], [email protected].

ประเภทงาน:

งานประจำ

• ออกแบบสินค้าคอนกรีตสำเร็จรูป (Reinforced Precast Concrete).
• ออกแบบสินค้าคอนกรีตอัดแรง (Prestressed Concrete) ทั้งในส่วนของ Pre Tension และ Post Tension.
• จัดทำ Shop Drawing ตามเนื้องานที่กล่าวไปข้างต้น เพื่อใช้สำหรับงานติดตั้ง.
• บริหารโครงการให้เป็นไปตามแผนงานและส่งมอบงานให้กับลูกค้า.
• บริหารกลุ่มพนักงานติดตั้งและผู้รับเหมาติดตั้ง.
• ทำ Project Improvement ต่าง ๆ.
• Qualifications: จบการศึกษาระดับปริญญาตรี คณะวิศวกรรมศาสตร์ สาขาวิศวกรรมโยธา (G.P.A. > 2.70).
• มีใบกว.ประกอบวิชาชีพวิศวกรรมควบคุมด้านโยธา ระดับภาคีวิศวกรโยธา (ภย.).
• มีทักษะภาษาอังกฤษในเกณฑ์ดี (TOEIC > 550).
• ยินดีรับนักศึกษาจบใหม่ หรือผู้ที่มีประสบการณ์ในการทำงาน 1-3 ปี.
• สามารถขับรถยนต์ได้และมีใบขับขี่รถยนต์.
• สามารถเดินทางไปทำงานต่างจัดหวัดทั้งเป็นครั้งคราวและประจำได้.
• กรณีที่สามารถใช้โปรแกรมการวิเคราะห์โครงสร้างได้ จะได้รับการพิจารณาเป็นพิเศษ.
• สามารถปฏิบัติงานที่ บางซ่อน กรุงเทพฯ ได้.
• SCG Cement and Green Solutions Business.

ทักษะ:

SOLIDWORKS, AutoCAD, BIM

ประเภทงาน:

งานประจำ

• รับผิดชอบการเขียนแบบและออกแบบชิ้นงานในรูปแบบ 2D และ 3D โดยใช้โปรแกรม SolidWorks และ AutoCAD ให้ตรงตามข้อกำหนดและความต้องการของวิศวกร ลูกค้าและโครงการ.
• ตรวจสอบและแก้ไขแบบให้ถูกต้องและสมบูรณ์ก่อนก่อสร้าง.
• สื่อสารและประสานงานกับวิศวกร, ทีมงานวิศวกรรม และลูกค้าเพื่อให้การดำเนินงานเป็นไปตามแผนงาน.
• Responsibilities: รับผิดชอบการเขียนแบบและออกแบบชิ้นงานในรูปแบบ 2D และ 3D โดยใช้โปรแกรม SolidWorks และ AutoCAD ให้ตรงตามข้อกำหนดและความต้องการของวิศวกร ลูกค้าและโครงการ.
• ปรับปรุงแบบและรายละเอียดของชิ้นงานตามความเห็นของวิศวกรและลูกค้า.
• จัดทำเอกสารการขึ้นแบบ และรายงานความคืบหน้าในการเขียนแบบ.
• ตรวจสอบแบบให้สอดคล้องกับมาตรฐานการออกแบบที่กำหนด.
• ทำงานร่วมกับทีมวิศวกรและลูกค้าในการแก้ไขปัญหาที่เกี่ยวข้องกับแบบ.
• Qualifications: สำเร็จการศึกษาระดับ ปวส. ขึ้นไป ในสาขาเครื่องกล หรือเมคคาทรอนิกส์.
• มีประสบการณ์ใช้โปรแกรม SolidWorks และ AutoCAD อย่างน้อย 1-2 ปี.
• มีความรู้พื้นฐานด้านการเขียนแบบ วิศวกรรมเครื่องกล และมาตรฐานงานออกแบบ เช่น ISO, DIN.
• มีความรู้ความเข้าใจในหลักการทางกลศาสตร์และวัสดุที่ใช้ในงานวิศวกรรมเครื่องกล.
• มีความละเอียดรอบคอบ แก้ไขแบบได้ถูกต้อง และทำงานตามกำหนดเวลาได้ดี.
• หากมีความรู้ความเข้าใจ และทักษะการทำงานบนระบบ BIM จะพิจารณาเป็นพิเศษ.
• SCG Cement and Green Solutions Business.

ทักษะ:

Mechanical Engineering, Civil Engineering, Teamwork

ประเภทงาน:

งานประจำ

• พัฒนาธุรกิจและผลิตภัณฑ์ (Business & Product Development): จัดทำ Business Model และ พัฒนา Water Solutions (Product, Service, Solution) เพื่อตอบโจทย์ภาคเกษตรกรรม และแสวงหาโอกาสขยายผลธุรกิจ สู่ตลาดต่างประเทศ.
• การตลาดภาคสนามและการสร้างการรับรู้ (Field Marketing & Awareness): ปฏิบัติงานภาคสนาม ณ หน้างานจริง (ติดตั้ง, ร้านค้า Agent, ออกบูธ) เพื่อส่งเสริมการรับรู้, เก็บ Feedback (VOC) และนำไปใช้ในการปรับปรุงผลิตภัณฑ์ให้ตรงตามความต้องการของลูกค้า.
• กระบวนการพัฒนาผลิตภัณฑ์ใหม่ (New Product Development - NPD): ดำเนินการตามกระบวนการ N ...
• การสร้างความร่วมมือทางธุรกิจ (Partnership & Collaboration): ประสานงานกับ Partner ทั้งภายใน และภายนอก เพื่อแสวงหาและสร้างโอกาสทางธุรกิจใหม่ ๆ และสนับสนุนการขยายตัวของธุรกิจสู่สากล.
• Qualifications: Bachelor s degree in Mechatronics Engineering, Mechanical Engineering, Agricultural Engineering, Civil Engineering, Food Engineering or a related field.
• Minimum GPA of 2.70 for undergraduate and 3.30 for postgraduate studies.
• Good command of English (TOEIC score of 550 or higher).
• Thorough understanding of agronomical knowledge and its applications (including crop water management, use of agrochemicals, and organic products).
• Knowledge of product engineering principles, including material science and manufacturing processes (QA/QC).
• Excellent communication and collaboration skills for cross-department teamwork.
• Proficiency in engineering design software (SolidWorks) and/or system simulation tools.
• Strong ability to conduct technical analysis and problem-solving.
• Knowledge and understanding of marketing content related to product positioning, market needs, and competitive analysis.
• Experience in developing new products or equipment for agricultural water systems is an advantage.
• Proven ability to identify market/product gaps and implement corrective actions, including conducting field trials on agricultural crops, is an advantage.
• Willingness to work upcountry (outside major cities) and ability to operate effectively and independently.

ทักษะ:

Contracts, Electrical Engineering, English

ประเภทงาน:

งานประจำ

• Preparation of technical scope (activity lists, BOM etc.) for planned inspections for our SGT 800 customers with Long Term Program (LTP) contracts.
• Lead, co-ordinate and/or execute the technical activities to deliver preventive maintenance to our customers.
• Derive technical input to quotes for upselling and conduct technical risk assessment for the upsell scope. This is done in consultation with other functional teams.
• Responsible for the update of product data in IT systems after inspections.
• Maintain updated understanding on customer s gas turbine units including core engine information (operating cycle/operating hours) and history.
• Responsible for the contracts technical specifications and that Engine Life are followed and reports the project's technical results.
• Follow up and report deviations between contract and actual outcome to the contract owner.
• Define, coordinate, drive, follow up and complete technical issues within the project (raise case in SFDC).
• Be the project s technical representative as well as the link to the technical organization. Responsible for technical issues before, during and after meetings with customers, suppliers, and project teams.
• Product/Technical Support.
• Provides prompt technical response to Customer to keep our customer equipment operating safely.
• Liaises with global engineering teams/expert to seek further support if technical issue cannot be resolved regionally.
• Defines and assesses technical risks, if necessary, in consultation with other technical functions.
• Feedback from site to standard and service design/development department regarding design issues.
• Support other functions in the business unit, e.g., Sales, Logistics etc., in any technical issues related to the SGT-800 gas turbine that may arise, such as service product presentation, clarify mods & ups scope and help with customs clearance when importing spare parts..
• Business responsibility.
• Have a financial awareness in / about the project.
• Support MK&S team to identify new opportunities from technical recommendations provided to the customer.
• Capable and willing to assist the Head of Distributed Technical Support in special projects and improvement initiatives.
• To ensure that work is carried out within the framework of the cost budget and given time schedule with high standard of quality.
• What You Bring.
• You have commissioning or installation experience of SGT 800 turbines.
• Or have a solid technical background relevant for Gas Turbine Engineering. It can be a technical degree (Bachelor or Master of Science in Control/Mechanical/Electrical Engineering), or Gas Turbine work experience.
• Good understanding of operation of gas turbine and driven compression equipment and their associated auxiliary systems; air filtration, acoustic packages, lube oils systems, fuel gas systems, seal gas system and other auxiliary systems.
• Ability to work as a team player and contribute to the success of the team.
• Good verbal and written communications skills in English and Thai.
• Ability to initiate ideas to resolve complex issues and improve work processes.
• Comfortable with working in several IT systems.
• Interest in process improvement is a benefit, as this is one of our focus-areas.
• The team you will be part of a growing regional engineering team with strong connections to colleagues working in our headquarter. We strive to support each other and build a strong technical knowledge within the team. There is always someone to discuss solutions and ideas with within the team before presenting the final scope. An internal buddy program will be set up to take care of new team members.
• Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.
• Who is Siemens Energy?.
• At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With ~100,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we re also using our technology to help protect people and the environment.
• Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.
• Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo.
• Our Commitment to Diversity.
• Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.
• Rewards/Benefits.
• The opportunity to engage in important projects of our Distributed portfolio with significant long term contracts, high volume and profitability focus!.
• Be part of a regional team and global community with high flexibility and drive, that focuses on performance and high quality deliverables.
• Enrich your business network with key stakeholders.
• Readily available learning platform to support your career growth!.
• https://jobs.siemens-energy.com/jobs

ทักษะ:

ISO 27001, English

ประเภทงาน:

งานประจำ

• รับผิดชอบการ Monitoring ควบคุมและจัดการระบบพื้นฐานเกี่ยวกับ ไฟฟ้า และระบบปรับอากาศ ระบบเครือข่าย เพื่อสนับสนุนการจัดการ.
• ตอบสนองความต้องการของลูกค้า และประสานงาน การติดตั้งและการแก้ไขปัญหาระบบของผู้บริการ (vendor) เพื่อให้ถูกต้องและสมบูรณ์ตามหลักปฎิบัติ.
• ควบคุมและประสานงานการบำรุงรักษาและการซ่อมแซม (Preventive Maintenance) ระบบพื้นฐานต่างๆ เครื่องกำเนิดไฟฟ้า Generator, เครื่องสำรองไฟฟ้า UPS, ระบบตู้ไฟฟ้า, ระบบปรับอากาศ และการติดตั้งอุปกรณ์ระบบเครือข่าย (Network) เป็นต้น.
• เป็น 1st level support & troubleshooting ของระบบ Facility ใน Data Center เช่น ระบบ Network, ระบบไฟฟ้า, ระบบปรับอากาศ เป็นต้น.
• จัดทำกระบวนการปฎิบัติงาน และคู่มือการทำงานในการดูแลระบบพื้นฐาน โดยอิงตามมาตราฐาน ISO หรือมาตรฐานอื่นที่เกี่ยวข้องกับการปฏิบัติงาน (เช่น ISO 20000 ด้านบริการ, ISO 27001 ด้านความปลอดภัย,ISO 50001 ด้านบริหารพลังงาน และอื่นๆ เช่น ISO22301, PCIDSS, TCOS) รวมทั้งรูปแบบใบบันทึก, รายงานต่าง ๆ.
• สรุปและรายงานผลสำหรับปัญหาวิกฤติใด ๆ ต่อหัวหน้าทีม รวมทั้ง การจัดทำรายงานสถิติ,รายงานวิเคราะห์แบบรายวัน, รายเดือน รายไตรมาส ด้วย.
• Bachelor s degree in electrical power, mechanic or related fields.
• Thai nationality, Male, Age 20 - 25 years old.
• Have basic technical knowledge in Data Center facilities (Electrical/Mechanical).
• Able to work under pressure.
• Able to work with a team.
• Fair communication in English.

ทักษะ:

Teamwork, Data Analysis, Mechanical Engineering, English

ประเภทงาน:

งานประจำ

• Prepare well designs, detailed drilling programs and budget in accordance with Well Management System and well objectives.
• Review, track and analyze drilling operations. Provide solutions for performance improvement in terms of time, cost and safety.
• Contribute to developing relevant instructions for exploration/delineation and development drilling activities. Ensure that they are in line with Well Management System (WMS).
• Coordinate and liaise with service providers to assure continuity, effectiveness and efficiency of the operations.
• Serve as Contract Holder to initiate bidding and/or negotiating for third party services as well as prepare and manage drilling contracts in compliance with Company's Procurement Process and SSHE Contractor Management Standard.
• Prepare end of well reports and capture lessons learnt at the end of the campaign or after troubleshooting for operations improvement.
• Ensure equipment and materials required for the drilling operations are properly specified and ordered in time.
• Visit designated operations area on frequent basis to foster safe operations and performance improvement.
• Contribute to HAZID/HAZOP activities, SSHE reviews and follow-up of action items.
• Ensure the Drilling Program and drilling operations are performed in accordance with applicable legal requirements, SSHE Management System, Well Management System (WMS), and Standard Operating Procedure (SOP).
• Professional Knowledge & Experiences.
• Bachelor s Degree in Petroleum Engineering, Mechanical Engineering or equivalent.
• Minimum 3-year experience in drilling operations, including 2-year experience as Drilling Operations Supervisor at offshore drilling rigs.
• Knowledge of performance optimization, supplier management, and materials procurement, service contracts, and SSHE for drilling operations.
• Good command of both written and spoken English.
• Analytical and presentation skill.

ทักษะ:

Contracts, Risk Management, Procurement, English

ประเภทงาน:

งานประจำ

• Provide engineering design and review engineering practices and methods regarding to drilling fluids and cement.
• Conduct engineering studies of new technology/methodology and optimization related to drilling fluids & cement and make technical recommendations to continually improve operations efficiency.
• Provide technical advice and consultation to solve or mitigate operational problems related to drilling fluids and cement during execution phase.
• Provide technical review and recommendation for well operations.
• Act as technical authority in responsible areas to sanction MOCs, in compliance with Well Management System, standards/guidelines/ procedures, and corporate SSHE policy.
• Prepare and updates the standard instructions concerning drilling fluids and cement to ensure safe and efficient operations.
• Provide input on vendor s technical pre-qualification for supply chain management function.
• Initiate bidding and/or negotiating for third party services as well as prepare and manage drilling contracts.
• Liaise with third party drilling fluids / cementing laboratories in requesting for their services for specific studies.
• Review the scope of work for drilling fluids & cement when call for tender are being written. Review technical and cost evaluation of drilling fluids / cementing bids.
• Supervises and follows up drilling fluids / cementing contracts. Ensures that the contractor fully adheres to the work procedures and technical specifications required by Company.
• Contribute to the optimization and the cost reduction of drilling activities while maintaining a high level of safety and avoiding any pollution.
• Prepare other drilling engineering studies, when necessary, under the supervision of Manager, Drilling Engineering Section.
• SSHE.
• Contribute to HAZID/HAZOP activities, SSHE reviews and follow-up of action items.
• Ensure that high SSHE standards and technical integrity is maintained in all designs and programs.
• Ensure the Drilling Program is in line with the SSHE Management System, Well Management System (WMS), Standard Operating Procedure (SOP), Management of Contractors and Suppliers and the local regulatory requirements and provide input for improvement as required.
• Provide input for emergency response plans and risk management process by conducting risk assessments, prioritizing remedial actions and assigning owners for follow up.
• Promote and ensure an effective implementation of SSHE rules and engineering best practices.
• Professional Knowledge & Experiences.
• Bachelor's Degree in Engineering or equivalent.
• Minimum 10-year of experience in various types of Drilling Fluid System in various areas in a supervisory capacity.
• Knowledge of performance optimization, supplier management, and materials procurement, service contracts, and SSHE for drilling operations.
• Good in written and spoken English skills.
• Additional Desirable Qualification.
• Organizing, Analytical, and interpersonal skill.
• CORE Competencies.

ทักษะ:

CAD

ประเภทงาน:

งานประจำ

• Responsible for design from conceptual through detailed phases and leading of others, including the design/drafters to meet Customer requirement.
• Perform accurate engineering calculations to determine load requirements, equipment sizing, energy efficiency, and system performance.
• Create detailed system layouts, schematics using computer-aided design (CAD) software, adhering to industry standards and project specifications.
• Site work for obtaining existing field conditions for design.
• Prepares technical design reports including basis of design and system evaluations.
• Reviews of construction shop drawings, requests for information, change orders and other similar tasks during the construction phase of the project.
• Work closely with relevant person, providing technical guidance and actively participating in design.
• Perform other duties assigned by supervisor or manager.
• Skills and Qualifications
• Responsibilities Responsible for design from conceptual through detailed phases and leading of others, including the design/drafters to meet Customer requirement.
• Perform accurate engineering calculations to determine load requirements, equipment sizing, energy efficiency, and system performance.
• Create detailed system layouts, schematics using computer-aided design (CAD) software, adhering to industry standards and project specifications.
• Site work for obtaining existing field conditions for design.
• Prepares technical design reports including basis of design and system evaluations.
• Reviews of construction shop drawings, requests for information, change orders and other similar tasks during the construction phase of the project.
• Work closely with relevant person, providing technical guidance and actively participating in design.
• Perform other duties assigned by supervisor or manager.

ประเภทงาน:

งานประจำ

• Assess and evaluate the physical space requirements and recommend plans to meet needs.
• Conduct ongoing inspection and maintenance to ensure proper functioning of facilities, monitor, troubleshoot, repair, and replace the facilities' mechanical and electrical components and systems.
• Hire and oversees outside contractors for facility maintenance.
• Recommend purchase of maintenance tools, equipment and supplies as required.
• Responsible for other relating tasks as assigned to align with business policy and build long term business growth.
• Explore opportunity to improve work flow and build healthy environment.
• Build a career with us as we help our customers and the community live Healthier, Longer, Better Lives.
• In accordance with recruitment policy and hiring standard of AIA (Thailand) Company Limited, after completing the selection process, you are required for criminal background check before joining the company. Your criminal record information will be retained according to the PDPA policy of the company. As per attached link
• https://www.aia.co.th/th/about-aia/privacy/candidate Build a career with us as we help our customers and the community live Healthier, Longer, Better Lives. You must provide all requested information, including Personal Data, to be considered for this career opportunity. Failure to provide such information may influence the processing and outcome of your application. You are responsible for ensuring that the information you submit is accurate and up-to-date.

ทักษะ:

Compliance, Cost Estimation, English

ประเภทงาน:

งานประจำ

• Plan, develop and recommend strategies, work plan for new technology, procedures and methodology to improve technical/ cost performance and manpower.
• Monitor, supervise and control all areas of well activities to ensure that technical and operational aspects of work are carried out efficiently and safely according to department s work program, budget and schedule.
• Plan, control and ensure the optimization of technical integrity and maintenance of all assets wells in compliance with Company s SSHE Management System.
• Prepare well operation report, well work instruction, cost estimation and scheduling.
• Update/ prepare procedures for all new equipment introduced into well operations and propose changes to existing procedures as and when needed.
• Provide timely and accurate information to well management on operational status and any deviations from plans, programs, policies, procedures and guidelines.
• Ensure that equipment is properly rigged up and tested under pressure control principles and procedures, and within designed specifications and equipment limitations.
• Coordinate, manage and control field operations to ensure that all activities are carried out in safe and efficient manner.
• Coordinate the overlap with concerned parties to carry out the tasks as proposed.
• Lead daily operations and render day-to-day detailed work instructions to the working teams on-site.
• Provide technical support/advice to Engineer and involved party regarding equipment, tools, operational limitation, operational concerns, etc.
• Manage all available resources and workforce appropriately to ensure that objectives are achieved, and staff are fully utilized.
• Professional Knowledge & Experiences.
• Bachelor s Degree in Engineering in Process/ Petroleum/ Mechanical or equivalent work experience.
• Minimum 10 years experience in Offshore well servicing operations with strong background in wireline, electric line, completion, coiled tubing, workover and well P&A.
• Well control certificate for drilling operations or well intervention is required.
• Excellent command of spoken and written English.
• Appropriate managerial skills and supervisory experience.
• Additional Desirable Qualification.
• Risk assessment knowledges.
• International experiences.
• Contract management skill.
• CORE Competencies.

ทักษะ:

CAD, Compliance, Research, English

ประเภทงาน:

งานประจำ

• The CAD Production Design - High Jewelry will translate concepts, and oversee the product functionality, and technical design elements including aesthetic, form, style, details and materials into 3D CAD models, ensuring design for manufacturability, design intent, and quality requirements are achieved during all phases of design development.
• Plan, create, and develop all 3D CAD models for new products and existing products, reverse engineering, and for all phases of design development in accordance with dep ...
• Create drawings for components by translating designs into 3D models and/or all components to meet critical requirements for use in Jewelry manufacturing.
• Ensure ALL models created are in keeping with CAD modeling best practices and manufacturing standards (e.g., closed solid objects, minimal object density, model/structure organization, etc.).
• Create, maintain and organize 2-D, 3-D shared design standards, specifications and templates. Prepare engineering and design materials in compliance with archiving procedures.
• Provide timely and innovative CAD solutions to complex mechanical problems, at any point in the production life cycle, and work with cross-functional teams to refine design critical requirements based on functional capabilities.
• Identify opportunities for Continuous Quality Improvement and the creation of efficiencies within areas of responsibility and overall department, with follow-up as needed for achieving successful outcomes.
• Perform regular print setups and conduct routine maintenance on all machines, manage post-processing of 3D prints on office 3D printers.
• Communicate printing supplies and material needs to Management, organize printing supplies, and material ordering. Facilitate waste removal.
• Ensure key product creation process dates/gates are met, tools are effectively utilized, and cross-functional teamwork occurs. Monitor and ensure adherence to timelines and accurate completion of projects. Communicate effectively to keep team updated on project status, issues, and concerns.
• Identify and communicate potential barriers to meeting completion timelines as soon as they arise.
• Actively participate in brainstorming sessions and, proactively flag critical issues for consideration that may impact design and/or design aesthetic when creating and transferring 3D CAD models, and at any point in the production life cycle.
• Proactively flag critical issues for consideration that may impact design integrity and/or aesthetic, manufacturing and/or quality of final product (e.g., meeting of tolerances, reliability between 3D CAD and final product) when creating and transferring 3D CAD models, and at any point in the production life cycle.
• Partner with internal BK teams to oversee CAD development regarding project direction, review of Concept Art / CAD timelines and issue.
• Provide relevant updates and propose solutions to Senior CAD Designers, Managers, Directors, and cross-functional departments on project direction, review of CAD files, timelines, and any potential challenges.
• Attend and actively participate in internal meetings with Management to provide feedback on new and/or updated standards, templates, and processes.
• Proactively communicate risks and opportunities to all relevant US based counterparts.
• Support internal and external suppliers as needed by the project team to demonstrate product requirements and techniques.
• Identify opportunities for improvement and creation of efficiencies within area of responsibility and overall department. Create and implement plans to achieve results.
• Lead by example by sharing learnings, outcomes, and proven innovative approaches with the CAD team to foster collaborative growth opportunities and idea exchange.
• Create opportunities to research and operationalize innovative processes during the design, concept, and prototyping stages of the design life cycle.
• Propose, develop, and enhance new and existing CAD workflows, and supporting communication tools as needed.
• Remain current with industry standards and knowledge related but not limited to; CAD, Model Making, Gold/Metalsmithing, material properties of precious and non-precious materials from different manufacturing processes (e.g. direct casting from 3D model vs. hand fabricated assembly).
• When required, work with IT and management to implement and troubleshoot new and existing CAD technology; update/advise management on departmental software/technology upgrades; and work with IT and Design Administration to implement modern technology.
• Bachelor s degree in Jewelry Design, Jewelry Art or in related design field; combination of experience.
• Significant CAD and model making training and experience with high degree of aesthetic sensibility.
• Manufacturing knowledge of jewelry making and/or other related industries.
• Expert skill set in Rhino software, SubD tool in Rhino, Z-Brush, Jewelry Design.
• Proficiency in the Adobe Suite; Photoshop, illustrator, InDesign.
• Ability to work independently, to adapt and meet urgent timelines under high demand conditions.
• Excellent communication skills, written and verbal. Good people skills and team player.
• English Professional Working Proficiency - Perform the core responsibilities of the role that require English communication.
• Proficiency in Photorealistic rendering and animation software, Keyshot, V-Ray.
• Prominent level of professionalism and communication.
• Jewelry industry certification.

ทักษะ:

Data Analysis, SQL, Problem Solving, English

ประเภทงาน:

งานประจำ

• Working closely with business and technical domain experts to identify data requirements that are relevant for analytics and business intelligence.
• Implement data solutions and data comprehensiveness for data customers.
• Working closely with engineering to ensure data service solutions are ultimately delivered in a timely and cost effective manner.
• Retrieve and prepare data (automated if possible) to support business data analysis.
• Ensure adherence to the highest standards in data privacy protection and data governance.
• Bachelor s of Master s Degree in Computer Science, Computer Engineering, or related.
• Minimum of 1 Year with relational/non-relational database systems and good command in SQL.
• Ability to meet critical deadlines and prioritize multiple tasks in a fast-paced environment.
• Ability to work independently, have strong problem solving and organization skills, with a high initiative and a sense of accountability and ownership.
• Experience with cloud-based platforms such as AWS, Google Cloud platform or similar.
• Experience in data processing batch / real time / nearly realtime.
• Experience with data integration or ETL management tools such as AWS Glue, Databrick,or similar.
• Experience with web or software development with Java,Python or similar.
• Experience with Agile methodology is a plus.
• Good in communication and writing in English.
• Good interpersonal and communication skills.

ทักษะ:

Sales, Contracts, Project Management, English

ประเภทงาน:

งานประจำ

• As a technical sales expert, you will consistently monitor market development in the assigned sales area of southeast Asia markets and maintain the project lists on an ongoing basis.
• The sales area to be targeted is the field of HV. Products and turnkey projects.
• You will develop these projects from an early stage and manage them till successful completion of order.
• Prepare the sales and bid strategy for projects including pricing.
• Negotiate and successfully close the contracts together with our commercial experts.
• Close cooperation with the engineering, tender & project management team and other expert departments in the headquarters.
• You will build up and maintain relationships by making frequent visits to our worldwide customers' and business partners' decision-makers, and you will also have to cooperate with our regional subsidiaries providing required local support and contacts.
• What You BringYou have successfully completed a bachelor s degree in electrical engineering with a focus on high-voltage engineering or similar.
• You have more than 5-10 years of relevant professional sales experience in the electrical energy transmission market, particularly in development of turnkey projects.
• You have an ample network within the southeast Asia national transmission network operators.
• Technical knowledge in high or medium voltage engineering or respective products.
• Willingness for international travel and site visits to customers offices and sites.
• You can demonstrate intercultural experience through your previous activities.
• You are business-fluent in English & Thai.
• Full working rights in Thailand.
• About the Team Our Grid Technology division enables a reliable, sustainable, and digital grid. The power grid is the backbone of the energy transition. Siemens Energy offers a leading portfolio and solutions in HVDC transmission, grid stabilization and storage, high voltage switchgears and transformers, and digital grid technology
• Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 92,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we re also using our technology to help protect people and the environment. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo
• Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.
• Rewards/Benefits Be a trusted advisor to both your Internal and External Stakeholders.
• Develop your technical and soft-skills working with cross-functional teams.
• Numerous further training opportunities (technical, soft skills etc.) are available to you on the Siemens Energy Learning platform.
• Jobs & Careers: https://jobs.siemens-energy.com/jobs

ทักษะ:

Business Development, Project Management, Risk Management

ประเภทงาน:

งานประจำ

• Drives and monitors Key Customer s satisfaction and Gas Turbine (as well as compressors and steam turbines) Performance via Reliability & Availability KPIs.
• Establishes him/herself as the point of contact for escalation; Provides early recognition of potential risks with major business impact (Previous service KAM responsibility).
• When necessary, escalates identified risks in time to Head of CTS to ensure appropriate and timely resolution.
• Understand fleet reliability (strength and weakness) from the competition installed base.
• Advise product management teams in Distributed on how to improve reliability/availability of products based on customer interactions.
• Advise LTP MK&S on reliability/availability value proposition for New Unit opportunities and existing service fleet.
• Propose development of new CTS offerings based on customer needs to improve reliability/availability.
• Presents Reliability & Availability KPIs to Key Customers and Siemens Energy management on regular basis.
• What You Bring.
• 10+ years of experience with sales / marketing / commercialization / business development.
• Bachelor s in Engineering, Business administration or associated fields.
• Master s level education in energy systems or associated fields are preferred.
• Proficiency with Sales Force and Project Management tools and methodologies.
• Experience with risk management, resources management, project timeline management.
• Strong background in optimization, automation, and improvement projects.
• Must be customer focused and be able to demonstrate leadership, problem solving / decision making in a high-pressure environment.
• Appreciation of Siemens international Customer base, their respective cultural diversity, and an ability to communicate in more than one language would be a distinct advantage.
• Be analytical. Open & Inclusive. Pragmatic. Big-picture thinker.
• Excellent written and verbal communication skills are essential demonstrating the ability to communicate at all levels of the organization, along with commercial appreciation.
• Initiative and be a flexible self-starter, working with minimal direction.
• Ability to analyze information and provide reports and feedback to project team members and management.
• Able to present information in a clear manner to the project team and management.
• A good understanding of the O&G Services business in the Distributed Generation market, including but not limited to: customers, regional set-up, strategy, business processes, especially as these businesses/customers/markets/processes relate to digitalization.
• Willing to travel 25-30% of the time.
• Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.
• Who is Siemens Energy?.
• At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.
• Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.
• Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo.
• Our Commitment to Diversity.
• Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.
• Rewards/Benefits.
• Outstanding opportunity for personal development working in an organization covering multiple facets of the energy industry and energy transition.
• Develop technical sales skills that provides SE management exposure to your successes and accomplishments.
• Exposure to obtain coaching and mentorship from experience sales peers leading to an open feedback culture.
• Provide flexible and hybrid working arrangement!.
• Readily available learning platform to support your learning growth!.
• Jobs & Careers: https://jobs.siemens-energy.com/jobs.