เงื่อนไขการค้นหา

ประสบการณ์:

7 ปีขึ้นไป

ทักษะ:

Industrial Engineering, Analytical Thinking, Data Analysis, Enthusiastic, Electronics

ประเภทงาน:

งานประจำ

• Develop capacity models for manpower, equipment, space, and production requirements.
• Analyze demand, production constraints, and utilization to support capacity and investment decisions.
• Identify bottlenecks and recommend practical solutions to improve production flow.
• Support workforce planning, headcount requirements, and equipment justification.
• Productivity & Operational Excellence.
• Lead productivity, labor-efficiency, cycle-time, and cost-reduction initiatives.
• Conduct time studies, work measurement, line balancing, and standardized-work analysis.
• Optimize manufacturing layouts, material flow, workstation design, and resource utilization.
• Establish and monitor productivity standards and operational KPIs.
• Lead Lean Manufacturing, waste-reduction, and continuous-improvement projects.
• NPI & Manufacturing Readiness.
• Support new product introduction, process transfer, production ramp-up, and manufacturing-readiness reviews.
• Define manpower, equipment, capacity, space, and layout requirements for new products.
• Partner with cross-functional teams to ensure production systems are scalable, efficient, and cost-effective.
• Data Analysis & Technical Leadership.
• Develop analytical models, dashboards, and business cases to support operational decisions.
• Present capacity, productivity, cost, and investment recommendations to management.
• Provide technical guidance and coaching to engineers and cross-functional teams.
• Lead complex, cross-functional improvement projects from planning through implementation.
• Bachelor's degree or higher in Industrial Engineering, Manufacturing Engineering, Operations Management, or a related field.
• Minimum 7 years of experience in industrial engineering, manufacturing engineering, or operational excellence.
• Experience in optical, photonic, semiconductor, electronics, or high-volume manufacturing is preferred.
• Strong experience in capacity planning, time study, line balancing, layout design, labor modeling, and productivity improvement.
• Good knowledge of Lean Manufacturing, Six Sigma, Kaizen, value-stream mapping, and problem-solving methodologies.
• Strong analytical skills with proficiency in Excel and data-visualization or analytical tools.
• Experience supporting NPI, manufacturing transfer, capital investment, and production ramp-up.
• Strong project leadership, business acumen, and cross-functional influencing skills.
• Good command of written and spoken English.
• Preferred Competencies.
• Strategic and Analytical Thinking.
• Technical Leadership and Influence.
• Capacity and Productivity Management.
• Operational Excellence.
• Data-Driven Decision-Making.
• Cross-functional Collaboration.
• Project and Change Management.
• Working Conditions.
• Work in office, cleanroom, and manufacturing-floor environments.
• Occasional support outside normal working hours may be required depending on project and production needs.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Recruitment, Data Entry, Teamwork, Cloud Computing, SAP

ประเภทงาน:

งานประจำ

Req ID: 140010 Remote Position: No Region: Asia Country: Thailand State/Province: Chonburi City: Laem Chabang General Overview Functional Area: Engineering Career Stream: Process Engineering Manufacturing SAP Short Name: MG1-ENG-PRM Job Level: Level 09 IC/MGR: Manager Direct/Indirect Indicator: Indirect Summary The Manager, Manufacturing Process Engineering is responsible for leading and managing the work of designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customers products. Detailed Descri ...

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.
• Terms of Use.
• Privacy Policy.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Good Communication Skills, Industrial Engineering, Automation, English, Thai

ประเภทงาน:

งานประจำ

• Start your career adventure and build strong technical and problem-solving skills that open doors to multiple career paths within a global industrial leader.
• Wellbeing and Inclusion.
• At Michelin Thailand, experience a supportive and inclusive culture that values collaboration, continuous improvement, and individual contribution.
• A Global Brand.
• Join a world-class organization committed to quality, safety, innovation, and sustainable mobility.
• About the Department.
• At the Industrial Engineering Department, we aim to improve performance and efficiency by deploying Michelin Way tools, developing operational excellence, and enabling teams to manage their own progress sustainably.
• Support and accelerate progress initiatives using Michelin Way tools, methods, and approaches.
• Deploy industrial engineering fundamentals (IE Basics) and ensure they are implemented and sustained.
• Enable operational teams to become autonomous in managing their performance and progress initiatives.
• Support change management, ensuring acceptance of change and engagement of key stakeholders.
• Collaborate closely with operational teams and managers to drive sustainable improvements.
• Who We Are Looking For.
• Required.
• Bachelor's Degree or higher in Engineering (Industrial, Production, Chemical, Mechanical, or related fields).
• 1-3 years of experience in Industrial Engineering or Process Engineering.
• (New graduates are welcome to apply).
• Strong analytical skills with the ability to interpret data and drive improvement.
• Good communication skills and the ability to influence and challenge constructively.
• Ability to work under pressure in a dynamic operational environment.
• Ability to communicate effectively in Thai and English.
• Selection Process Requirement.
• Candidates will be required to pass a Logical Test and an Industrial Engineering (IE) Test during the selection process.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Mechanical Engineering, ISO 14001, ISO 9001, English, Thai

ประเภทงาน:

งานประจำ

• This dual-role position begins as a Site.
• Mechanical Engineer.
• during the construction and commissioning phase of the industrial waste-to-energy plant.
• After COD, the position transitions into O&M, responsible for leading the mechanical maintenance team to ensure the reliability, safety, and performance of all mechanical systems in day-to-day operations.
• Job Responsibilities.
• Monitor the EPC contractor's mechanical installation works (boilers, turbines, conveyors, pumps, etc.) for conformance to design and quality standards.
• Conduct daily site inspections to verify safety compliance and work progress.
• Coordinate with the owner's engineering, QA/QC, and HSE teams to manage issues arising at site.
• Participate in mechanical testing, commissioning, punch list inspections, and system handover processes.
• Support documentation review such as O&M manuals, test reports, and equipment data sheets for handover readiness.
• Attend site coordination meetings and report progress/issues to the Site Manager.
• Supervise mechanical personnel in the safe and timely execution of their duties on a day to day basis.
• Supervise mechanical repair and troubleshooting and assist in the training of the mechanical personnel.
• Set up preventive/predictive maintenance program and prepare all necessaries spaceports and consumable materials for mechanical repair.
• Improve technical information of mechanical equipment in maintenance database system.
• Maintain journals, logs, maintenance and equipment records and various reports.
• Provide general direction, control and evaluate to subordinate classifications.
• Initiate purchase requisition for any maintenance parts required and submit for approval.
• Job Qualifications.
• Bachelor's degree in Mechanical Engineering or related field.
• Minimum 5 years.
• of experience in mechanical work in power plant, energy, or large-scale industrial settings.
• Experience in both construction supervision and plant O&M is strongly preferred.
• Must know and actively support quality, environmental, safety, and social management systems (e.g., ISO 14001, ISO 9001, ISO 45001, and ESMS).
• Familiarity with mechanical systems in WtE (waste-to-energy), thermal power plants, or heavy industrial facilities.
• Sound knowledge of preventive maintenance planning, condition monitoring, and mechanical failure analysis.
• Strong leadership, communication, and team coordination skills.
• Able to work full-time on-site and adapt to changing project/operation conditions.
• Proficiency in Thai; basic English for technical documents and reporting is a plus.
• Fluent in English both written and verbal (Minimum 600 TOEIC score).
• Goal - Oriented, Unity, Learning, Flexible.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Industrial Engineering, AutoCAD

ประเภทงาน:

งานประจำ

• You will coordinate with plant teams to implement competitive output standards, drive required changes, and hold teams accountable for results.
• You will lead and support plants in conducting Industrial Engineering studies to determine the most efficient sequences of operations and workflows, maximizing utilization of production facilities and personnel while ensuring workplace safety.
• You will analyze current manufacturing footprint utilization to identify and prioritize opportunities to reduce Total Delivered Cost (TDC) through the implementation of ...
• You will develop, implement, and sustain action plans that drive measurable improvements in plant performance.
• You will support, sustain, and continuously improve manufacturing methods by benchmarking performance and sharing best practices across plants.
• You will develop studies and prepare project documentation for growth and capability expansion initiatives.
• You will engage with plant and regional leaders to manage, communicate, and present strategies and key initiatives.
• What We're Looking For.
• You have a Bachelor's degree in Industrial Engineering or a related engineering discipline.
• You have 3+ years of experience leading or supporting Industrial Engineering-related projects within a manufacturing environment.
• You have experience implementing output standards in manufacturing operations.
• You have experience leading projects and driving change management initiatives.
• You have strong knowledge of Industrial Engineering tools, including capacity analysis, cycle time studies, manning definition, and layout design (e.g., AutoCAD).
• What Will Set You Apart.
• You can work effectively across all levels of the organization, from hourly team members to executive leadership.
• You have knowledge and experience establishing, monitoring, and improving output standards.
• You demonstrate the ability to guide and mentor others and show developing leadership capability.
• Li-KB3.
• Goodyear is one of the world's largest tire companies. It employs about 63,000 people and manufactures its products in 49 facilities in 19 countries around the world. Its two Innovation Centers in Akron, Ohio, and Colmar-Berg, Luxembourg, strive to develop state-of-the-art products and services that set the technology and performance standard for the industry. For more information about Goodyear and its products, go to www.goodyear.com/corporate.
• Goodyear is an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to any characteristic protected by law.