เงื่อนไขการค้นหา

ทักษะ:

Power point, HACCP

ประเภทงาน:

งานประจำ

• รับผิดชอบควบคุม, ติดตาม, สั่งงาน, มอบหมายงาน ให้พนักงานซ่อมและบำรุงรักษาเครื่องจักร ตามหลักวิชาการและตามขอบข่ายงาน เป็นผู้นำปฏิบัติกิจกรรมและ ระบบบริหารคุณภาพและระบบต่าง ๆ ภายในแผนกที่บริษัทจัดทำและเป็นไปตามข้อบังคับเช่น ISO9001, GHP, HACCP, ISO14001, ISO45001,TPM กิจกรรมข้อเสนอแนะและจป.หัวหน้างานเป็นต้น ควบคุม,ติดตามงานซ่อมและบำรุงรักษาเครื่องจักรให้มีประสิทธิภาพที่ดี เพื่อทำการผลิตสินค้าให้สำเร็จตามแผนการผลิตที่วางไว้และได้มาตรฐานการผลิตของบริษัท มีคุณภาพ มีประสิทธิภาพ มีความปลอดภัยต่อผู้บริโภค และต้นทุนต่ำ.
• ควบคุมงานให้ได้ตามเป้าหมาย แนวทางการดำเนินงาน ตารางการซ่อมและบำรุงรักษาเครื่องจักร วางแผน,ควบคุมการใช้เครื่องจักร กำลังคนและอะไหล่ ประจำปี และการปรับปรุงกระบวนการภายในแผนก ติดตามการดำเนินงานและตรวจสอบประสิทธิภาพและประสิทธิผลการทำงานอย่างต่อเนื่องและถูกต้องตามหลักวิชาการ.
• ประสานงานหน่วยงานภายใน (แผนกประกันคุณภาพ แผนกผลิต แผนกวางแผนการผลิต แผนกจัดซื้อ แผนกต้นกำลัง แผนกอะไหล่) เพื่อให้สามารถดำเนินการผลิตสินค้าได้อย่างต่อเนื่อง ประสานหน่วยงานภายนอก เพื่อรับการนำเสนอผลิตภัณฑ์และบริการ เพื่อประกอบแนวทางการปรับปรุงประสิทธิภาพกระบวนการทำงานของเครื่องจักรภายในแผนก.
• กระตุ้นให้พนักงานในแผนกให้เห็นความสำคัญในการทำงาน ในด้านปริมาณคุณภาพ เวลา มีความปลอดภัย มีประสิทธิภาพและต้นทุนต่ำ.
• สรุปผลการดำเนินงานซ่อมและบำรุงรักษา รวมถึงกิจกรรม ระบบบริหารคุณภาพและระบบต่าง ๆ ภายในแผนกต่อผู้บังคับบัญชา เสนอแนะแนวทางการปรับปรุงกระบวนการต่อผู้บริหารเพื่อเป็นแนวทางการตัดสินใจ และสามารถนำไปประกอบการกำหนดนโยบายและแผนงาน.
• วุฒิการศึกษา ปริญญาตรี สาขาวิศวกรรมไฟฟ้า,วิศวกรรมเครื่องกล อิเล็กทรอนิกส์ หรือสาขาที่เกี่ยวข้อง.
• มีประสบการณ์งานด้านต้นกำลังเครื่องจักรและงานซ่อมบำรุงในโรงงาน 5 ปีขึ้นไป.
• มีความรู้และทักษะในการใช้งานอุปกรณ์ และ เครื่องจักรต่างๆ ในกระบวนการผลิตเช่น Filler Labeller Packing Injection Blowing เป็นอย่างดี.
• มีความรู้และทักษะ ระบบบริหารคุณภาพและระบบต่าง ๆเช่น ISO9001, ISO22000, GHP, HACCP,NSF,HALAL, ISO14001, ISO45001, กิจกรรมข้อเสนอแนะและจป.หัวหน้างานเป็นต้น.
• มีทักษะการใช้คอมพิวเตอร์ (Word, Excel, Power Point).
• มีภาวะความเป็นผู้นำ สามารถแก้ปัญหาเฉพาะหน้าได้ดี.
• สามารถทำงาน 6 วันได้.

ทักษะ:

Quality Assurance, GMP

ประเภทงาน:

งานประจำ

• รับผิดชอบในการวางแผนอัตรากำลังคนภายใต้การบังคับบัญชาให้ปฏิบัติงานอย่างมีประสิทธิภาพ.
• รับผิดชอบในการควบคุมคุณภาพสินค้าและวัตถุดิบให้ได้ตามข้อกำหนด.
• วิเคราะห์ปัญหาที่เกิดขึ้นภายในสายการผลิตทั้งเรื่องของคุณภาพสินค้าและคุณภาพของวัตถุดิบ.
• ดูแลรับผิดชอบความสะอาดในพื้นที่ที่รับผิดชอบ.
• ดูแลและบำรุงรักษาเครื่องมือและเครื่องจักรเบื้องต้นเพื่อไม่ให้เกิดความเสียหาย.
• ปฏิบัติตนเองเพื่อเป็นภาพลักษณ์ที่ดีของบริษัท.
• อื่น ๆ ตามที่ได้รับมอบหมายจากผู้บังคับบัญชา.
• จบการศึกษาระดับ ปริญญาตรี ขึ้นไป: สาขา: วิทยาศาสตร์การอาหาร หรือสาขาที่เกี่ยวข้อง.
• มีประสบการณ์ในสายงานตั้งแต่ 2 - 3 ปี.
• มีใจรักในงานบริการ มีความละเอียดรอบคอบ.
• มี Growth Mindset.

ทักษะ:

Quality Assurance, Assurance

ประเภทงาน:

งานประจำ

• Coordination on establishment and / or improvement system in support of various quality systems program in pursue of continuous audit activities. improvement, coordination of customer and other external party.
• Managing and coordination of the activities of the different sections of the department.
• To ensure that the organization of Quality Management System is maintained in accordance with the requirement of International Standard.
• Review and approve the effectiveness of corrective and preventive action of all quality issued of the and including customer feedback or requirement.
• Coordinate with all departments within the organization on quality matters.
• Draft the quality-training program and direct quality relates activities.
• Monitoring the performance of the department against established goals/metrics and addressing problem area.
• Bachelor's Degree or higher in Electrical/ Electronics Engineering, Science, Business Administration or other related field.
• At least 10 years of working experience in related field.
• Experience in industrial, manufacturing, electronics industry will be a plus.
• Good command of both spoken and written English.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.
• Terms of Use.
• Privacy Policy.

ทักษะ:

Quality Management System, Statistical Analysis, Quality Assurance, Problem Solving, Data Analysis

ประเภทงาน:

งานประจำ

ทักษะ:

Quality Assurance, Leadership Skill, Assurance

ประเภทงาน:

งานประจำ

• Serve as the Manufacturing QA technical lead for assigned products or production areas.
• Monitor manufacturing quality performance, including defects, yield loss, scrap, rework, process capability, and quality escapes.
• Ensure production processes comply with control plans, work instructions, specifications, and quality requirements.
• Review manufacturing and traceability records to ensure accuracy and compliance.
• Define inspection strategies, sampling plans, acceptance criteria, and quality controls.
• Provide quality disposition for nonconforming products and support Material Review Board decisions.
• Problem Resolution & Risk Management.
• Lead investigations into complex manufacturing, process, material, and workmanship issues.
• Drive containment, root-cause analysis, corrective and preventive actions, and effectiveness verification.
• Use 8D, CAPA, PFMEA, SPC, MSA, and other quality tools to reduce risks and prevent recurrence.
• Escalate significant quality risks and communicate recovery plans to management and stakeholders.
• NPI & Change Management.
• Lead manufacturing-quality readiness for NPI, product transfer, qualification, and production ramp-up.
• Ensure PFMEA, control plans, inspection methods, traceability, and quality documentation are ready before production release.
• Review engineering, material, equipment, and process changes to ensure quality risks are properly evaluated and controlled.
• Quality Systems & Improvement.
• Ensure compliance with company quality systems, customer requirements, and applicable ISO standards.
• Support internal, customer, and external audits and drive timely corrective-action closure.
• Lead improvement projects to reduce defects, variation, scrap, rework, and cost of poor quality.
• Provide technical guidance and coaching to Quality Engineers, technicians, inspectors, and production teams.
• Promote strong manufacturing discipline, quality ownership, and continuous improvement.
• Bachelor's degree or higher in Engineering, Materials Science, Physics, Applied Science, or a related field.
• Minimum 8-10 years of experience in manufacturing quality assurance or quality engineering.
• Experience in optical, photonic, semiconductor, electronics, or high-technology manufacturing is strongly preferred.
• Strong knowledge of 8D, RCA, CAPA, PFMEA, control plans, SPC, MSA, DOE, and statistical analysis.
• Experience managing manufacturing nonconformance, audits, process validation, NPI, and engineering changes.
• Good understanding of ISO 9001 or comparable quality-management systems.
• Strong technical leadership, analytical, problem-solving, and cross-functional influencing skills.
• Good command of written and spoken English.
• Preferred Competencies.
• Manufacturing Quality Leadership.
• Quality Risk Management.
• Structured Problem-Solving.
• Data-Driven Decision-Making.
• Audit and Compliance Readiness.
• Cross-functional Collaboration.
• Coaching and Technical Influence.
• Working Conditions.
• Work in office, quality laboratory, cleanroom, and manufacturing-floor environments.
• Occasional support outside normal working hours may be required for urgent manufacturing-quality issues.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

ประสบการณ์:

4 ปีขึ้นไป

ทักษะ:

Project Management, Product Owner, Automation, Javascript, TypeScript

ประเภทงาน:

งานประจำ

Job Description: Responsibilities: Code and Review: Continuously code, read, analyze, design, and optimize front-end, back-end, and integration code across Merkle's proprietary products and solutions throughout the development lifecycle: assessing technical design, implementation quality, identifying technical risk areas, and pinpointing the right scope for testing. Product Ownership: Act as Product Owner for Merkle's proprietary innovation products: defining and prioritizing the product backlog, aligning roadmap decisions with business stakeholders, and ensuring features are deliv ...

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Microsoft Office, Power point, Assembly, English

ประเภทงาน:

งานประจำ

• Control and monitor incoming quality performance for current and new model parts.
• Support in-line troubleshooting, defect investigation, supplier quality analysis, and defect judgement with related departments based on drawing and specification requirements.
• Conduct containment action for supplier quality issue, root cause analysis, 8D report validation, and countermeasure verification to prevent recurrence and improve supplier quality systems.
• Coordinate corrective and preventive actions with suppliers and related departments.
• Support new model activities including on-site co-check, APQP, trial evaluation, change point confirmation, quality readiness validation, supplier audit, and process change confirmation.
• Analyze dimensional and inspection results using measurement and inspection equipment.
• Monitor quality data, prepare management reports, and support quality system improvement activities.
• Support urgent quality issues and production impact cases.
• Bachelor's Degree in Engineering with 2-3 years experience in QA, QC, Supplier Quality in automotive manufacturing business.
• Basic knowledge of quality tools such as 7 QC tools, Why-Why analysis, 8D, FMEA, and APQP.
• Able to read engineering drawings, understand GD&T, and analyze inspection results based on drawing and specification requirements.
• Able to coordinate with suppliers and cross-functional teams along with good communication and problem-solving skills.
• Able to use and analyze inspection results from measurement equipment such as Caliper, Height Gauge, CMM, Roughness/Roundness/Contour.
• Basic understanding of manufacturing processes such as Die Casting, Machining, Heat Treatment, Injection, and Assembly process.
• Good command in English communication and report writing.
• Able to work under pressure and support urgent quality issues.
• Proficient in Microsoft Office (Excel, PowerPoint, etc.).
• Site Allowance 10% of base salary.
• Diligent Allowance.
• Provident Fund.
• Health Insurance.
• Bonus.

ทักษะ:

Quality Assurance, Assurance, Automation

ประเภทงาน:

งานประจำ

• Reviewing requirements, specifications, and technical design documents to provide timely and meaningful feedback.
• Leading the End-to-end testing processes for new and existing projects to meet user needs.
• Define and execute testing to measure Accuracy, Latency for AI development (Agentic AI, Predictive AI).
• Creating detailed, comprehensive, and well-structured test plans and test cases.
• Designing, developing, and executing tests, both automation and manual.
• Investigating the causes of non-conforming software and train users to implement solutions.
• Estimating, prioritizing, planning, and coordinating test activities.
• Recording issue log documents thoroughly and track bugs.
• Coordinating and providing solutions for application testing throughout the lifecycle to business users, developers, and designers, Infra & Security team, and vendors.
• Organizing and coordinating tasks and activities performed by the project team to ensure project progress.
• Serving as a single point of contact for some of the assigned applications.
• Investigating and resolving application functionality-related issues, providing first-level support, troubleshooting, and identifying modifications needed to meet business processes.
• Bachelor's degree in information technology, computer science, engineering, IT, or a related field from Prominent universities.
• Proven work experience 5 years or above in software development and QA, automated testing tools (Playwright and Cypress).
• Strong knowledge of QA methodologies, tools, and processes.
• Experience in writing clear, concise, and comprehensive test plans and test cases.
• Hands-on experience with automated testing tools.
• Solid knowledge of SQL and scripting.
• Able to multi-task and prioritize workload supporting multiple projects.
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Goal-Oriented, Unity, Learning, Flexible.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Quality Management System

ประเภทงาน:

งานประจำ

• Customer quality focusing maintain customer satisfaction, good analytical skill.
• Work directly with Quality, Operation, Manufacturing and other internal function as well as supplier.
• Supervise and utilize quality department personnel.
• Responsible for collecting quality data, data analysis, reporting and Internal 3P(Process, Product, People) Audit system.
• Manage the preventative and corrective action process and manages quality communications.
• Drive KPI thru goal deployment with effective tools and communication.
• Active role in project initiatives, innovation and continuous improvement.
• Defines and specifies the implementation of standards, methods, and procedures for inspecting, testing, and evaluating the precision, accuracy, and reliability of company products.
• Develop local essential training material, conduct workshop & certified.
• Monitor all Quality related Key Performance Indicators (KPI's) weekly and monthly and provide guidance to teams in determining root causes for issues ensuring corrective actions that will enable the company CIS to meet all Quality Department Key Performance Targets. (Quality Department KPI's included but is not limited to: Customer PPM, Concern PPM, Supplier PPM, Warranty Cost, Scrap Cost, Line Reject Rates, etc.).
• Notifies Operations of Quality issues.
• Coordinate customer, internal and supplier corrective and preventive actions in line with approved the company management systems.
• Identifies and reports trends in quality which may impact customer requirements.
• Lead warranty analysis and improvement in order to meet company target for warranty cost.
• Coordinates all ISO/TS related management review/activities.
• Coordinate all customer audits and implement/maintain customer quality systems.
• Bachelor's degree of Mechanical Engineer, Industrial Engineer or relate fields.
• Minimum 5 years' experience for Quality Assurance in Automotive Industry.
• Excellent verbal and written communication skills; ability to interact directly with customers and multiple levels of management.
• Good knowledge on Quality Standards i.e. TS 16949 and quality assurance discipline.
• High Confidence and Strong character and Good relationship.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Industrial Engineering, Quality Assurance, Assurance, English

ประเภทงาน:

งานประจำ

• Audit & Verify: Perform final quality checks on Landing Gear work packages (signatures, stamps, and material traceability) before archival.
• Digitalization: Lead the digitization project for technical records, ensuring 100% searchable accuracy for all life-limited part (LLP) documents.
• Control: Manage the distribution and revision control of OEM technical manuals and Service Bulletins.
• Master Registry: Own the site Calibration Database for all precision measurement equipment (PME) and torque tools.
• Logistics: Coordinate with external laboratories for the timely calibration of tools to ensure zero disruption to shop floor operations.
• Compliance: Manage "Out of Tolerance" reports and assist QA Engineers with impact assessments.
• Matrix Management: Maintain the site Training & Competency Matrix, ensuring all technicians hold valid authorizations (Human Factors, SMS etc.).
• Audit Readiness: Organize and maintain individual quality files for internal and external regulatory audits.
• Education: Bachelor's Degree in Aerospace Engineering, Industrial Engineering, or a related technical field.
• Experience: 1-3 years in a regulated industry (Aerospace MRO is highly preferred; Automotive or Medical Device experience is a plus).
• Software Skills: Advanced MS Excel skills are mandatory (v-lookups, pivot tables for tracking). Experience with MRO software is an advantage.
• Attributes: Highly organized "Librarian" mindset with a focus on data integrity. Ability to read and interpret technical aviation documentation.
• Language: Good command of technical English (written and verbal) for navigating OEM manuals and regulatory forms.
• About us.
• Revima Asia Pacific is a leading provider of maintenance, repair and overhaul (MRO) services for aviation components, with a strong focus on landing gear systems. As part of the global Revima Group, we leverage cutting-edge technology and industry expertise to deliver exceptional quality and reliability to our customers across the Asia-Pacific region. Join our dynamic team and be a part of our continued growth and success.
• Apply now.

ทักษะ:

Quality Assurance, Architecture, Recruitment, Automation, Kubernetes

ประเภทงาน:

งานประจำ

Who We Are Located in the heart of Bangkok's Phrom Phong District, Sertis is ASEAN's leading Data and AI engineering and solutions company. Since 2014, our advanced solutions and products have powered over 400 enterprise Data and AI deployments at the region's leading companies and conglomerates. We are also a member firm of Andersen Consulting, a global consulting practice integrating business strategy, digital transformation, and AI-driven technology solutions with Andersen Global's world-class expertise. What We Do Sertis provides both productized and bespoke AI and Data solutio ...

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Bachelor's degree or above in Electronic Engineering, Electrical Engineering, Mechanical Engineering.
• Initiative, high responsibility and good teamwork.
• Professional working attitude, high responsibility and good teamwork, Eager to learn new things & technology: most important.
• Interest in R&D work and eager to be part of team to develop green technology for better world.
• Cooperate with Colleagues in Thailand factory and RD center in China.
• Utilize FMEA (DFMEA/PFMEA) to identify design and process defects and drive design optimization.
• Acquire structured logical analysis tools such as 5Why, Fishbone diagram, Is/Is Not (separation analysis), etc.
• Be capable of independently leading the 8D problem-solving process and promoting the thorough improvement of issues during the R&D and trial production stages.
• Have DOE (experimental design) awareness to verify key parameters and be able to conduct data analysis using SPC (statistical process control).Verbal and written communications skills in English, knowing Chinese is a plus.
• Able to travel oversees China.
• I. Quality Assurance during Design Phase.
• Participate in the design review of power modules to ensure that the design meets quality and reliability requirements.
• Promote design risk assessment (such as DFMEA), assist in identifying potential failure modes and formulating preventive measures.
• Review design output documents (such as specifications, BOM, drawings) to ensure clear quality requirements.
• II. New Product Introduction (NPI) Quality Management.
• Support quality monitoring and problem tracking during sample trial production and engineering verification (EVT/DVT/PVT) stages.
• Assist in developing process quality control points (such as Control Plan, SOP, QC tools).
• Promote quality risk assessment and improvement before mass production (such as yield analysis, DOE, process capability analysis).
• III. Handling and Improving Quality Issues.
• Lead the analysis and handling of quality issues during the R&D stage (such as test failures, customer complaints).
• Use quality tools (8D, 5 Whys, Ishikawa) for root cause analysis and drive improvements.
• Follow up on the implementation and effectiveness verification of improvement measures to prevent the recurrence of problems.
• IV. Quality Data Management and Reporting.
• Establish and maintain quality data (such as yield, failure rate, test pass rate), conduct trend analysis.
• Regularly produce quality reports to support R&D decisions and management review.
• Assist in establishing quality KPIs to drive the quality awareness and goal achievement of the R&D team.
• V. Quality System and Compliance Support.
• Ensure that the R&D process complies with quality management systems and safety regulations such as ISO, IATF, IEC.
• Support internal audits and customer audits, prepare relevant quality documents and technical explanations.
• Promote standardization of quality processes and continuous improvement (such as document management, process optimization).
• VI. Supplier Quality Collaboration.
• Participate in supplier selection and technical evaluation to ensure that their quality capabilities meet the requirements of power modules.
• Assist suppliers in introducing quality standards and monitor their incoming material quality performance.
• Handle supplier quality issues and drive improvements and verification.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Quality Assurance, Assurance

ประเภทงาน:

งานประจำ

• Carry out daily audit on production operation according to operation instruction in pilot run line.
• Perform quality audit in production process, sub-assemblies and finished goods.
• Conduct quality audit for new model or re-run models, with reference to BOM and ECN.
• Conduct critical material audit as per critical material check list.
• Contribute to NPI QA department improvement goals.
• Bachelor's Degree in Electrical, Electronics, Industrial, Mechanical Engineering or other related field.
• At least 1-2 years of working experience in quality field.
• Good command of both spoken and written English.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.
• Terms of Use.
• Privacy Policy.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Industrial Engineering, Electrical Engineering, Mechanical Engineering, Quality Assurance, Problem Solving, Risk Management, Data Analysis, Architecture, Negotiation, Data Entry, ISO 9001

ประเภทงาน:

งานประจำ

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Job Title: Lead Engineer, Design Quality.
• Functional Area: Engineering (ENG).
• Career Stream: Design Quality Engineering.
• Role: Lead Engineer.
• Job Code: LEN-ENG-DQE.
• Job Band: 08.
• Direct/Indirect Indicator: Indirect.
• Job Overview.
• The Lead Engineer, Design Quality helps to supports the quality assurance efforts during the design and development phase of new products, ensuring compliance with industry standards, regulations, and customer requirements for the different projects in the Design and Engineering Services Group; from architecture to electronic circuit design and analysis, verification, validation and transfer into manufacturing.
• Detail Description.
• Provides engineering support and coordination around QMS. Understands Quality Management Systems for Design and Manufacturing.
• Support design reviews and design transfers providing inputs on quality and requirements.
• Guide and assist in developing Design Controls in compliance with 21 CFR 820, ISO 13485, ISO 9001.
• Develops and implements quality control procedures, work instructions, and inspection guidelines to enhance manufacturing and design processes.
• Provides engineering support and coordination for internal & external Design Audits.
• Helps to prepare submissions to FDA and CE Marking (EU MDR).
• Support the creation and updating of product risk management documents (Hazard analysis, DFMEA, RMP, RMR,) in accordance with ISO 14971.
• Collaborates extensively with cross-functional teams, including design, manufacturing, supply chain, and customers, to address and resolve quality issues throughout the product lifecycle.
• Able to manage a single line engineering project with limited number of participants and create project / change management plan, establish and distribute project roles, being able to communicate what is needed from the project participants in order to make the project successful.
• Demonstrate "Individual Leadership Behaviors" as per Leadership Imperatives.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Knowledge/Skills/Competencies.
• Expertise in root cause analysis, Failure Modes and Effect Analysis (FMEA), and 8D problem-solving methodologies.
• Familiarity with statistical process control (SPC) techniques and data analysis for quality improvement.
• Proficiency in the standards that need to be applied within the design and development process for the project under responsibility.
• Ability to develop and assess engineering processes.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• Typically 1-2 years of progressive experience in Design Quality Engineering, demonstrating a clear track record of successful project contributions.
• Typical Education.
• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related technical field.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Statistical Analysis, Data Analysis, Assembly, English, Thai

ประเภทงาน:

งานประจำ

• Manufacturing Quality Engineer.
• We are seeking an experienced and highly analytical Quality Engineer to drive manufacturing quality excellence. In this role, you will act as a critical bridge between our US-based engineering/operations teams and our Contract Manufacturing (CM) partners in Chonburi Thailand.
• Communicate and enforce CM quality requirements. Drive the use of quality metrics, 8D methodologies, and continuous improvement actions to rapidly resolve or proactivel ...
• Support all audit types (customer, vendor, and internal CM audits). Facilitate quality sample verification, and Ongoing Reliability Testing/Monitoring (ORT/ORM) activities.
• Ensure robust quality systems and best practices are fully stabilized for all new product launches. Work closely with cross-functional teams to confirm process stability, volume Ramp readiness, and Return Material Authorization (RMA) preparedness.
• Support the communication and analysis of customer failure data. Facilitate the generation of customer-facing reports detailing Root Cause Analysis and corrective/preventive actions. Review final Failure Analysis (FA) or 8D reports to confirm the successful closure of issues at CM and vendor sites.
• BS degree (or equivalent experience) in Quality, Engineering, or another highly relevant major.
• 5 to 10 years of professional experience in quality or manufacturing engineering.
• 2+ years of direct experience with optical component assembly.
• Outstanding problem-solving capabilities paired with strong statistical data analysis skills. Proven ability to drive solutions through cross-functional teams.
• Excellent written and strong verbal communication skills in English are required to effectively bridge global teams.
• Willingness and ability to travel regionally within Asia, with occasional travel to the Canada as needed.
• Preferred Qualifications.
• Proficiency in Thai and English is a strong expectation for effective communication with regional manufacturing partners.
• Hands-on experience working in a cleanroom manufacturing environment is highly helpful.
• Experience in using Quality Management Tools.
• Advanced statistical analysis skills for Six-Sigma, including DMAIC processes, FMEA, Design of Experiments (DOE), Hypothesis Testing, and ANOVA.
• At Ciena, we are committed to building and fostering an environment in which our employees feel respected, valued, and heard. Ciena values the diversity of its workforce and respects its employees as individuals. We do not tolerate any form of discrimination.
• Ciena is an Equal Opportunity Employer, including disability and protected veteran status.
• If contacted in relation to a job opportunity, please advise Ciena of any accommodation measures you may require.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Quality Assurance, Assurance

ประเภทงาน:

งานประจำ

• Lead and improve quality assurance systems, product quality standards, and continuous improvement initiatives across manufacturing operations. Ensure compliance with quality, environmental, and safety management systems while driving operational excellence and customer satisfaction.
• Manage and oversee quality assurance activities to ensure products meet customer and company quality standards.
• Maintain and improve Quality Management Systems, including ISO 9001, ISO 14001, and ...
• Lead quality system implementation, audits, corrective actions, and continuous improvement initiatives.
• Monitor product quality performance, customer complaints, non-conformance cases, and quality-related KPIs.
• Analyze quality issues and implement preventive and corrective actions to enhance product reliability.
• Oversee wastewater treatment system operations and ensure compliance with environmental regulations.
• Provide leadership, coaching, and technical guidance to team members to improve performance and capability.
• Manage departmental budgets, resources, and quality-related expenditures effectively.
• Collaborate with cross-functional teams to drive quality improvement and operational excellence.
• Bachelor's degree in Industrial Engineering, Printing Engineering, Manufacturing Engineering, Mechanical Engineering, or related fields (Bachelor GPA > 2.70, Master GPA > 3.30).
• 2-6 years of experience in Quality Assurance, Quality Management Systems, Manufacturing Quality, or related fields.
• Knowledge of Quality Management Systems (ISO 9001, ISO 14001, ISO 45001).
• Experience in quality control, product quality analysis, corrective and preventive actions, and continuous improvement methodologies.
• Understanding of manufacturing processes, printing production, or packaging industry is an advantage.
• Strong analytical thinking, problem-solving, leadership, and communication skills.
• Ability to work collaboratively with cross-functional teams and manage multiple priorities effectively.
• Good command of English in verbal and written communication (TOEIC > 550).
• Good communication skills in Chinese and able to communicate effectively with Chinese-speaking stakeholders.
• Willing to work onsite at Thai Container Co., Ltd. (Phraek Sa, Samut Prakarn).

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Project Management, Quality Assurance, Procurement, Assurance, ISO 9001

ประเภทงาน:

งานประจำ

• Develop and implement supplier quality plans and strategies for assigned projects, ensuring alignment with company standards and customer requirements.
• Conduct supplier audits, assessments and quality evaluations to identify areas for improvement and ensure compliance with quality specifications.
• Monitor supplier performance through key performance indicators (KPIs) and metrics, providing regular reporting and analysis to stakeholders.
• Manage corrective and preventive actions (CAPA) with suppliers to address quality issues and non-conformances.
• Collaborate with cross-functional teams including procurement, engineering, and production to resolve supplier-related quality issues.
• Provide technical support and guidance to suppliers on quality processes, testing requirements and documentation standards.
• Lead supplier quality improvement initiatives and projects, including process optimisation and capability development programmes.
• Maintain detailed quality documentation and records for audit trail and regulatory compliance purposes.
• Mentor and support junior quality team members, sharing knowledge and best practices.
• Communicate effectively with senior management, providing updates on supplier quality performance and risks.
• What we're looking for.
• Bachelor's degree in Engineering, Quality Management or a related discipline.
• Minimum 5-7 years of experience in supplier quality management, preferably within the automotive or manufacturing industry.
• Strong knowledge of quality standards and systems, including ISO/TS 16949, ISO 9001, and automotive quality requirements.
• Proven experience in conducting supplier audits and assessments using structured methodologies.
• Demonstrated ability to analyse quality data, identify trends and develop effective solutions.
• Excellent project management skills with the ability to manage multiple supplier relationships simultaneously.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers at all levels.
• Proficiency in quality management tools and systems, including statistical process control (SPC) and failure mode and effects analysis (FMEA).
• Experience with quality documentation systems and ERP software.
• Problem-solving mindset with attention to detail and a commitment to continuous improvement.
• Preferred: Experience in automotive safety-critical component manufacturing or certification knowledge (e.g. IATF certifications).

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Quality Assurance, Assurance

ประเภทงาน:

งานประจำ

• At Amity Solutions, we are driven by a powerful vision: to revolutionize the way businesses connect and engage with their customers and employees. Our dedication to innovation and cutting-edge technology has led us to craft a suite of groundbreaking solutions that cater to the digital needs of modern enterprises.
• With a focus on enhancing communication, productivity, and customer satisfaction, our core offerings include Enterprise AIChatbot Platform that streamlines interactions, AI-based generative Chatbots that learn and adapt, and pre-built social features d ...
• Hundreds of enterprises, including government organizations and global companies, have already experienced the transformative power of our AI solutions. Amity Solutions platforms are used to send over 27 million messages per month and enable employee interactions for over 600 thousand end users.
• https://www.amitysolutions.com.
• We are looking for a QA Engineer (Middle Level) to oversee project quality assurance. You will be an expert in testing the functions of projects related to Amity's products such as chatbots, social, chat, and video apps. You should have extensive experience in analysis, strong problem-solving abilities, and the ability to manage projects.
• You will be a member of the Professional Services Team, which is in charge of development projects for the company's customers. You will also collaborate as a team with the project manager, business analyst, and developers to ensure that the project meets the customer's expectations. You will be the one who assists the team in improving the project quality.
• Create test cases, test scripts, test scenarios, and quality metrics to track and test projects that will be delivered to customers.
• Execute quality testing and activities of the projects.
• Create quality assurance standards and business processes.
• Follow industry quality and safety standards.
• Ensure test results of the projects meet customer expectations and demand.
• Create reports documenting errors and issues to fixing.
• Explain and work with the developers to fix defects.
• Led team members and customers to test the projects.
• Maintain standards for reliability and performance of projects.
• Work closely with project managers, business analysts, and engineers to plan and create test cases of projects.
• Testing features as they're constructed during the development cycle.
• Participating in meeting with the internal team and customers to test and ensure the project's functionality doesn't cause issues.
• Working closely with engineers and technical support to reproduce and retest bugs from customers.
• Reporting the status of regression and project quality to stakeholders.
• At least 3-5 year of experience testing APIs, web, mobile applications, or console applications.
• Experience writing test cases.
• Good communication skills in.
• Thai and English.
• both written and verbal.
• Experience in regression testing and releases.
• Familiarity with Waterfall and Agile methodologies and Scrum is a plus.
• Experience with SDKs, Chatbot, and understanding how to test functions is a plus.
• Check out more about our company, Bangkok team and our benefits - https://www.amity.co/career/bangkok.
• LI-SP1.
• LI-HYBRID.
• C.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Statistical Analysis, Problem Solving, ISO 9001, English, Laos

ประเภทงาน:

งานประจำ

• Quality and Customers.
• Lead Customer Connection Program with plants: Customer BSC, customer visits, Customer Education, action plan on improvements as outcomes of customer satisfaction surveys.
• Ensure compliance with Mass prod Quality Referential.
• Work with Plant Quality Managers on Customer Issues Resolution: Structured 8D approach, animate effective exchange among the plants on lessons learned.
• Monitor process capability of the plants and facilitate support and action plan building on improvement based around BSC performance.
• Set in place process quality audits, work with plants to report issues, alert on non-conformance and support improvement action plans to get back to standard on Key KPI's.
• Monitor and report the product and process performance, actively follow the action plans on improvement.
• Support alignment between Mass prod plants and Rx labs.
• Develop a continuous improvement mindset, propose and work with engineering/sites improvement ideas.
• Interactions.
• Work closely together with quality managers on key topics in the plant and support product and process quality guarantee.
• Work with customers and support plants during quality issues needing regional coordination.
• Animate activities among QA Managers, Quality Experts, NPI Coordinators, WW Manufacturing Quality, SC, GE, Market Quality, and QMS teams and participate in manufacturing projects.
• Must have.
• Bachelor or Master's Degree in engineering or related field.
• Minimum 2 years' experience in a manufacturing environment.
• Hands-on and pro-active approach.
• Ability to work in a fast-paced environment.
• Proficient with MS Office programs (especially MS Excel, MS Powerpoint etc.).
• Excellent written and spoken English.
• 10-20% of time travelling.
• Technical Knowledge of Product and Process.
• Strong on analytical skills, problem solving.
• Technical knowledge on Quality systems, process control, Statistical analysis, Group QMS, ISO 13485.
• Specification (product & process) validation to product requirements (safety, regulation, claim, consumer benefit and satisfaction).
• Knowledge of Quality tools & methodologies (concept analysis, risk assessment.).
• Experience in mass production but no hands-on training given as needed.
• QMS ISO 13485 and/or ISO 9001 an advantage.

ทักษะ:

Electrical Engineering, Mechanical Engineering, Data Analysis, Automation, ISO 14001, ISO 9001

ประเภทงาน:

งานประจำ

• We welcome all makers, forward thinkers, and problem solvers who are looking for a place to do their best work. And if that's you we would love to have you join us!.
• As a Senior / Supplier Quality Engineer, you will manage supplier quality by qualifying suppliers, monitoring performance, conducting audits, and driving corrective actions to ensure quality and compliance.
• You will also senior Quality Engineering leadership for product quality, supplier quality, and continuous improvement plans. Responsible for advanced quality planning, ...
• product requirements to improve customer satisfaction.
• You will report to SUPPLIER QUALITY MANAGER based in Singapore.
• Lead quality planning and problem-solving activities using PFMEA, PPAP, MSA (R&R), and process capability tools.
• Qualify, assess, and audit suppliers to ensure compliance with Rockwell Automation quality standards.
• Monitor supplier quality performance and lead corrective and continuous improvement actions.
• Support NPI, product transfers, manufacturing strategies, and supplier approvals.
• Analyze quality data, field returns, and audit results to identify improvement opportunities.
• Manage deviations, waivers, CAPAs, ECNs, and PCNs to support our goals.
• Provide quality training, technical guidance to our teams and suppliers.
• Lead quality programs, Lean projects, and compliance with ISO 9001, ISO 14001, and regulatory requirements.
• Support project execution, milestone tracking, and coordination.
• Ensure compliance with company policies, safety, environmental, and quality standards.
• Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field.
• 3 or more years of experience in a manufacturing or industrial environment, with knowledge of electronic assemblies, PCB, and semiconductor commodities.
• Experience with APQP, PPAP, supplier audits, 8D problem-solving, and MSA methodologies.
• Proficient in data analysis, reporting, and presentations.
• Lean Six Sigma Green Belt certification or equivalent continuous improvement experience.
• Technical knowledge of mechanical components, electronic components, and commodity management.
• Functional Excellence.
• Demonstrate technical expertise and learning.
• Apply industry knowledge to support our goals.
• Seek feedback, coaching, and shares expertise with others.
• Collaboration & Communication.
• Addresses challenges and conflicts constructively.
• Commercial.
• Focus on delivering value to customers and partners.
• Set and achieve challenging goals while maintaining accountability.
• Improve productivity through process improvement, best practices, and waste reduction.
• Influence.
• Embrace change to evolving priorities.
• Support successful execution of new projects.
• Demonstrate, take ownership, and act decisively in uncertain situations.
• Act Courageously.
• Take informed action to fulfill responsibilities, even when information is incomplete or conflicting, and remain accountable for outcomes.
• Act decisively in critical situations and remains committed to the right course of action, even when faced with challenges, while upholding Rockwell Automation's values and standards.
• Our benefits package includes.
• Comprehensive mindfulness programs with a premium membership to Calm.
• Volunteer Paid Time off available after 6 months of employment for eligible employees.
• Company volunteer and donation matching program - Your volunteer hours or personal cash donations to an eligible charity can be matched with a charitable donation.
• Employee Assistance Program.
• Personalized wellbeing programs through our OnTrack program.
• On-demand digital course library for professional development. and other local benefits!.
• At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right person for this or other roles.
• LT-CT1.
• Rockwell Automation's hybrid policy aligns that employees are expected to work at a Rockwell location at least Mondays, Tuesdays, and Thursdays unless they have a business obligation out of the office.