เงื่อนไขการค้นหา

ทักษะ:

Chemical Engineering, Petrochemical

ประเภทงาน:

งานประจำ

• Lead/ be a part of the process design team working on onshore or offshore feasibility, conceptual, basic engineering, FEED, detailed design and EPC/ EPCM projects.
• Perform process engineering activities and review activities carried out by Engineers, Designers and CAD Operators.
• Liaise with other departments, clients, vendors, subcontractors and third parties.
• Participate in inter-disciplines, project, client and vendor meetings.
• Perform all Inter-discipline check.
• Prepare scope of work, manhour and cost estimates for proposals.
• Groom young engineers and provide advice to peers in his field of expertise.
• Principal Engineer who is a technical specialist has the added responsibility to act in a consultancy role, providing advice and carrying out specialized engineering tasks.
• Advise the Department Manger the manpower and skill levels required to ensure smooth execution of the project.
• Assign work to the team appropriately.
• Conduct meetings at regular intervals with team members to review progress and share the lesson learnt & typical issues.
• Overall responsible for the manhour & schedule monitoring and control and quality of the work produced.
• Organize and maintain project technical filing and archiving.
• Perform process simulations / calculations including heat and material balance; thermal design of exchanges; hydraulic calculations of piping networks and pipelines, blow down studies etc.
• Perform piping, equipment and instruments (control valves and PSV's) and selection of control scheme.
• Prepare equipment and instrument datasheets.
• Prepare PFD, UFD & P&IDs.
• Provide input into other discipline deliverables like: SAFE and Cause and Effect charts.
• Prepare line list and tie-in list.
• Prepare process equipment list.
• Develop process design basis; operating and control philosophy; isolation philosophy and safeguarding memorandum; relief and blowdown philosophy.
• Develop Pre/Commissioning manual and Operating manual.
• Prepare performance test procedures.
• Bachelor's Degree or higher in Chemical Engineering or equivalent.
• Minimum Level II Professional Engineering License from the Engineering Council of Thailand (if any).
• Minimum eight (8) years of experience for senior and fifteen (15) years of experience for principal in Process engineering design in the Oil & Gas, Refineries, Chemical, Petrochemical or related industries. Experience should cover at least eight (8) years of Process engineering design with Engineering Consultant.
• Knowledge and experience in Upstream/Downstream technologies.
• Highly motivated and strong leadership quality.
• Familiar with API, ASME and relevant standards and design codes.
• Familiar with typical Process simulation packages; HYSYS or Pro II, HTRI, Flarenet, Flaresim, Pipesim, Pipenet, Flowmaster.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Automation Engineer.
• Design, program, and maintain automated production equipment (PLC, robotics, conveyor/vision systems).
• Troubleshoot automation line downtime and improve OEE.
• Collaborate with process/mechanical teams on new equipment integration.
• Requirements: Bachelor's in Mechatronics/Electrical/Automation Engineering; PLC programming (Siemens, Mitsubishi, or similar); 1-5 yrs experience in manufacturing automation.
• Factory Sales.
• Manage customer accounts related to plant production capacity and delivery.
• Coordinate between customers and internal production/planning teams on forecasts, orders, and issue resolution.
• Support quotations, contract terms, and customer visits.
• Requirements: Bachelor's in Business/Engineering; sales or account management experience in manufacturing/electronics preferred; strong English communication.
• Industrial Engineer.
• Conduct time & motion studies, line balancing, and capacity planning.
• Improve manufacturing efficiency, layout, and cost reduction initiatives.
• Develop standard work instructions and process flow documentation.
• Requirements: Bachelor's in Industrial Engineering; knowledge of Lean/Six Sigma, line balancing tools; 1-5 yrs experience.
• Mechanical Engineer.
• Design, evaluate, and improve mechanical components/jigs/fixtures for production.
• Support tooling design, DFM/DFA reviews, and prototype validation.
• Work with cross-functional teams on NPI (new product introduction).
• Requirements: Bachelor's in Mechanical Engineering; CAD proficiency (SolidWorks/AutoCAD); manufacturing background preferred.
• Material Control.
• Manage inventory levels, material flow, and warehouse coordination.
• Monitor stock accuracy, cycle counts, and shortage/excess resolution.
• Coordinate with procurement, planning, and production on material readiness.
• Requirements: Bachelor's in Supply Chain/Industrial Engineering or related; ERP/SAP experience preferred; strong organizational skills.
• Production Supervisor.
• Oversee daily shop-floor operations, manpower allocation, and shift performance.
• Ensure production targets, quality standards, and safety compliance are met.
• Coach and manage production line teams/operators.
• Requirements: Bachelor's degree in Engineering or related; supervisory experience in manufacturing; leadership skills.
• Production Planning.
• Develop production schedules based on demand forecasts and capacity.
• Balance material availability, machine capacity, and delivery timelines.
• Monitor plan attainment and coordinate adjustments with production/material teams.
• Requirements: Bachelor's in Industrial Engineering/Supply Chain; planning software/ERP experience; analytical skills.
• Product Engineer (Electrical/Electronics).
• Support product design transfer from R&D to mass production.
• Analyze and resolve electrical/electronic product quality and reliability issues.
• Coordinate engineering changes (ECN/ECR) and documentation updates.
• Requirements: Bachelor's in Electrical/Electronics Engineering; circuit design or product engineering experience in electronics manufacturing.
• Project Management.
• Lead cross-functional project teams for new product introduction or process improvement.
• Manage timelines, budgets, risk, and stakeholder communication.
• Track project milestones and ensure on-time delivery.
• Requirements: Bachelor's in Engineering/related field; project management experience in manufacturing; PMP a plus.
• Test Engineer (Electrical/Electronics).
• Develop and maintain test procedures, fixtures, and equipment for electrical/electronic products.
• Analyze test failures and drive root-cause corrective actions.
• Support product qualification and reliability testing.
• Requirements: Bachelor's in Electrical/Electronics Engineering; experience with test equipment (oscilloscope, DMM, ATE); troubleshooting skills.
• SMT Engineer.
• Manage SMT line processes (reflow, printing, placement) for optimal yield and quality.
• Troubleshoot SMT defects (solder issues, placement accuracy) and drive process improvements.
• Support new product introduction on SMT lines, program machine parameters.
• Requirements: Bachelor's in Electronics/Industrial Engineering; SMT process experience; knowledge of IPC standards preferred.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Automation Engineer.
• Design, program, and maintain automated production equipment (PLC, robotics, conveyor/vision systems).
• Troubleshoot automation line downtime and improve OEE.
• Collaborate with process/mechanical teams on new equipment integration.
• Requirements: Bachelor's in Mechatronics/Electrical/Automation Engineering; PLC programming (Siemens, Mitsubishi, or similar); 1-5 yrs experience in manufacturing automation.
• Factory Sales.
• Manage customer accounts related to plant production capacity and delivery.
• Coordinate between customers and internal production/planning teams on forecasts, orders, and issue resolution.
• Support quotations, contract terms, and customer visits.
• Requirements: Bachelor's in Business/Engineering; sales or account management experience in manufacturing/electronics preferred; strong English communication.
• Industrial Engineer.
• Conduct time & motion studies, line balancing, and capacity planning.
• Improve manufacturing efficiency, layout, and cost reduction initiatives.
• Develop standard work instructions and process flow documentation.
• Requirements: Bachelor's in Industrial Engineering; knowledge of Lean/Six Sigma, line balancing tools; 1-5 yrs experience.
• Mechanical Engineer.
• Design, evaluate, and improve mechanical components/jigs/fixtures for production.
• Support tooling design, DFM/DFA reviews, and prototype validation.
• Work with cross-functional teams on NPI (new product introduction).
• Requirements: Bachelor's in Mechanical Engineering; CAD proficiency (SolidWorks/AutoCAD); manufacturing background preferred.
• Material Control.
• Manage inventory levels, material flow, and warehouse coordination.
• Monitor stock accuracy, cycle counts, and shortage/excess resolution.
• Coordinate with procurement, planning, and production on material readiness.
• Requirements: Bachelor's in Supply Chain/Industrial Engineering or related; ERP/SAP experience preferred; strong organizational skills.
• Production Supervisor.
• Oversee daily shop-floor operations, manpower allocation, and shift performance.
• Ensure production targets, quality standards, and safety compliance are met.
• Coach and manage production line teams/operators.
• Requirements: Bachelor's degree in Engineering or related; supervisory experience in manufacturing; leadership skills.
• Production Planning.
• Develop production schedules based on demand forecasts and capacity.
• Balance material availability, machine capacity, and delivery timelines.
• Monitor plan attainment and coordinate adjustments with production/material teams.
• Requirements: Bachelor's in Industrial Engineering/Supply Chain; planning software/ERP experience; analytical skills.
• Product Engineer (Electrical/Electronics).
• Support product design transfer from R&D to mass production.
• Analyze and resolve electrical/electronic product quality and reliability issues.
• Coordinate engineering changes (ECN/ECR) and documentation updates.
• Requirements: Bachelor's in Electrical/Electronics Engineering; circuit design or product engineering experience in electronics manufacturing.
• Project Management.
• Lead cross-functional project teams for new product introduction or process improvement.
• Manage timelines, budgets, risk, and stakeholder communication.
• Track project milestones and ensure on-time delivery.
• Requirements: Bachelor's in Engineering/related field; project management experience in manufacturing; PMP a plus.
• Test Engineer (Electrical/Electronics).
• Develop and maintain test procedures, fixtures, and equipment for electrical/electronic products.
• Analyze test failures and drive root-cause corrective actions.
• Support product qualification and reliability testing.
• Requirements: Bachelor's in Electrical/Electronics Engineering; experience with test equipment (oscilloscope, DMM, ATE); troubleshooting skills.
• SMT Engineer.
• Manage SMT line processes (reflow, printing, placement) for optimal yield and quality.
• Troubleshoot SMT defects (solder issues, placement accuracy) and drive process improvements.
• Support new product introduction on SMT lines, program machine parameters.
• Requirements: Bachelor's in Electronics/Industrial Engineering; SMT process experience; knowledge of IPC standards preferred.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.

ทักษะ:

Budgeting, CAD, BIM, English

ประเภทงาน:

งานประจำ

• Collaborate with project managers, architects, engineers, design consultants, and hotel operators.
• Prepare design presentations, drawings, and material boards.
• Coordinate with suppliers and contractors to ensure design integrity and build quality.
• Provide technical support during construction, review shop drawings, and address site issues.
• Conduct quality checks.
• Participate in design meetings.
• Support budgeting and scheduling activities.
• Maintain documentation and reporting throughout project lifecycles.
• About you.
• Strong hospitality design development capabilities, including experience with hotel and an understanding of brand-driven guest experiences.
• Proficiency in design and technical tools such as CAD/BIM software, 3D visualization tools, and standard office applications.
• Technical service background, including knowledge of construction methods, building materials, MEP coordination, and the ability to read and interpret architectural and engineering drawings.
• Prior experience with FF&E and OS&E specification will be considered an advantage.
• Effective communication and collaboration skills to work with cross-functional teams, operators, consultants, and contractors, with attention to detail in documentation and reporting.
• Ability to manage multiple projects, prioritize tasks, and meet deadlines in a fast-paced environment, with strong problem-solving and site coordination skills.
• Bachelor's degree in Architecture, Interior Design, or a related field, or equivalent professional experience.
• Experiences in hospitality design within the Bangkok Metropolitan Area or broader regional markets.
• Working proficiency in English and Thai.