Filter Jobs

Skills:

Microsoft Office

Job type:

Full-time

• Analyze plant processes and develop control strategies to optimize performance and safety.
• Review design for selection and specify instrumentation sensors, actuators, and control equipment.
• Review design and configure Distributed Control Systems (DCS) and Programmable Logic Controllers (PLC).
• Review design and develop human-machine interfaces (HMI) for plant operation and monitoring.
• Review instrument loop calculations and sizing for optimal system performance and assist Piping and instrument diagrams (P&ID).
• Review design and development of I&C engineering deliverables, control systems, shutdown PLC hardware and software design.
• Review datasheet / calculation for control valves, safety relieve valves, flow elements, restriction orifice; thermowell wake frequency and selection of the suitable valve, etc.
• Participate in Factory acceptance test and site acceptance test.
• Review and assist major Control System vendors from technical bidding stage until installation and commissioning completion.
• Review project bidding package, technical bid evaluation, Bill of Quantity, etc.
• Job QualificationsBachelor s Degree or higher in Control and Instrument Engineering or a related field.
• At least 5 years experience in Control & Instrument Engineering design firm.
• Strong understanding of control system principles, including feedback loops, signal processing, and PID control.
• Proficient in using C&I engineering software tools (e.g., DCS/PLC programming languages, HMI development tools).
• Experience with relevant C&I codes and standards (e.g., ISA, IEEE).
• Fluent in English verbal, written, computer, and technical communication and presentation skills, including proficiency in Microsoft Office.
• Experience in power generation, renewable energy, solar, hydropower, gas and infrastructure & utilities would be an advantage.
• Ability to travel/ work upcountry and abroad for unusual.
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/work upcountry and abroad.
• Goal-Oriented, Unity, Learning, Flexible.

Experience:

2 years required

Skills:

Problem Solving, English

Job type:

Full-time

• Work in close coordination with Project Team in developing and reviewing the Project s work plan and budget. Carry out technical and economic justification of the proposed work plan and budgets as well as provide comments and recommendation for approval.
• Monitor project performance, progress and expenditure by reviewing the operation activities report and statement of expenditure to achieve the project s objectives.
• Manage stakeholders to ensure that the projects performance in terms of technical qu ...
• Participate in commercial & financial, and technical meetings in order to obtain all necessary information, problems or obstacles for further study and analysis in terms of project return and value added and follow up the project s achievement and improvement.
• Coordinate with relevant functional departments to obtain technical support and recommendation on engineering aspects to perform analysis and evaluation on proposed technical aspects and provide comments and recommendation in terms of commerciality of the Project for management approval.
• Strengthen business relations with joint venture partners and related government agencies to ensure the smooth running of the Projects activities to achieve business goals and create mutual understanding and benefit.
• Professional Knowledge & Experiences.
• Bachelor s or Master s Degree in Engineering or related fields.
• In-depth knowledge of technical and commercial disciplines with minimum 2-3 years experience in business analysis or project planning in E&P or related business.
• Excellent command of both written and spoken English.
• Ability to think strategically & commercial mindset.
• In-depth understanding and ability to forecast business environment & risk.
• Integrated knowledge across various disciplines in order to align future business needs, optimize corporate benefits and avoid mitigate corporate risks.
• Good analytical & problem solving skills.
• Good team player.

Experience:

No experience required

Skills:

Electrical Engineering, English

Job type:

Part-Time

• Design, develop and implement process automation system for manufacturing..
• Implement and suppport electrical, automation and instrument system in manufacturing (PLC,DCS,Loop test)..
• Collaborate with cross-function team (Engineering, Production, IT) to integrate automation solution..
• Ensure projects are completed on time, within budget and in compliance with safety and quality standard..
• Design, develop and implement process automation system for manufacturing..
• Welcome New Graduated!.
• Good command in English and Computer skills..
• Good Problem-solving and Analytical skills..
• Situational Adaptability..
• Self-motivated, proactive and eager to learn new technology..
• Able to work in upcountry..

Skills:

Procurement

Job type:

Full-time

• Support construction and commissioning of hydropower plant control systems ensuring performance, safety, and reliability.
• Support the EPC team in engineering, procurement, and construction of control and instrumentation systems for the hydropower project.
• Review design and develop human-machine interfaces (HMI) for plant operation and monitoring.
• Review and specify instrumentation (flow, pressure, level, temperature sensors, control valves, actuators) for auxiliary systems.
• Review datasheet / calculation for control valves, safety relieve valves, flow elements, restriction orifice; thermowell wake frequency and selection of the suitable valve, etc.
• Support installation, calibration, and commissioning of control systems and field instruments.
• Participate in technical bid evaluations and ensure all C&I deliverables meet hydropower construction standards and project requirements.
• Job Qualifications.
• Bachelor s Degree or higher in Control and Instrument Engineering or a related field.
• At least 5 years experience in Control Engineering.
• Experience in power generation, renewable energy, solar, hydropower, gas and infrastructure & utilities would be an advantage.
• Strong understanding of control system principles, including feedback loops, signal processing, and PID control.
• Proficient in using C&I engineering software tools (e.g., DCS/PLC programming languages, HMI development tools).
• Experience with relevant C&I codes and standards (e.g., ISA, IEEE).
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/work upcountry and abroad.
• Goal-Oriented, Unity, Learning, Flexible.

Skills:

Software Development, Creative Thinking, English

Job type:

Full-time

• Manage and deliver OTT media-based project(s) as a program using agile software development principles, patterns, and practices with effective coordination of cross-vendor management and project tracking systems.
• Be accountable for the execution, management and quality control of projects from start to completion - delivered on schedule and within budget, positively contributing to the overall PMO portfolio of projects.
• Develop project and program estimates, plans, schedules and controls applying creati ...
• Improve policies and procedures within the PMO that enable teams to deliver quality solutions consistently and efficiently using a standard set of processes and tools.
• Identify program risks and execute mitigation activities.
• Execute change management diligently and collaborate with Account Management and Sales Engineering teams to manage commercial aspects.
• Stakeholder Management part;.
• Act as a single point of contact for stakeholders, vendors and delivery teams.
• Identify internal and external stakeholders and classify their influence and interests in order to tailor communication and reporting.
• Record and present key program data (Scope, Time, Cost, Quality, Risk, Change) to internal and external stakeholders.
• Lead the resolution of escalations and issues.
• Uphold high levels of stakeholder and vendor advocacy.
• Be responsible for project governance, change management, financial control and reporting to key internal stakeholders.
• 3 - 5 years experiences in Project Management.
• Bachelor degree in Business, Information Systems, Information Technology or related disciplines.
• Extensive knowledge in software application project and program coordination & management.
• Solid understanding of project and program management methodologies and processes.
• Practical experience in organizing and motivating large cross-functional and cross-vendor teams, controlling different interests between teams and stakeholders.
• Familiar with software/ internet development life cycle within an Agile environment with hands-on experience managing local and remote project vendor teams concurrently.
• Excellent commercial sense with business management principles, methods, and techniques.
• Fast-paced, self-motivated with ability to work independently.
• English communication skills (reading, writing and speaking) with a proven track record engaging and leading clients..

Experience:

3 years required

Skills:

Industrial Engineering, Production Engineering, English

Job type:

Full-time

• To design and development packaging, process line and packing machine in food industries field.
• To analyze and evaluate test data in order to find the solution for modified process line & packing machine cost down activities, productivity, and quality improvement.
• To set up the process control standard, packing material specification, packing machine specification, machine safety, and maintenance guideline.
• To manage project and team to stable production when applying project to industrialization stage.
• To communicate with packaging and machine supplier.
• Job Qualification.
• Bachelor or Master Degree in Packaging Engineer, Packaging Technology, Packaging & Material Science, Food Processing Engineering, Food Engineering or related field.
• Having 0-3 years of experience in packaging, packing machine or process line in the food industry or related field.
• Have an experience in production or QA/QC ISO9001 and quality system, ISO18000 and the ISO14001 system will be a special consideration.
• Good command of written and spoken English.
• Computer literate in MS Office.
• Able to work under pressure and skill of negotiation.
• Fresh graduated are welcome.

Skills:

Accounting, Budgeting, Microsoft Office, English

Job type:

Full-time

• Managing the company (Nissan Powertrainy's balance sheet, accounting books and month end closing to support accurate financial statement information.
• Capture all the direct and Indirect costs associated with car manufacturing process - including pre-manufacturing costs such as transportation and storage and post-manufacturing costs such as quality - and prepare Total Delivery Cost (TDC) report on a monthly basis.
• Perform product profit performance analysis.
• Responsible for the budgeting, analysis and forecasting of base cost preparation including consolidated product cost calculation e.g. Standard Cost, Actual Cost, Revision Cost, etc.
• Assist in responding to queries in relation to transfer pricing matters and prepare transfer pricing analyses to substantiate group cost and revenue recharges.
• Responsible for transfer pricing for inter-company transactions for vehicles and parts in alignment with Nissan's transfer pricing policy.
• Ensure costing in the manufacturing plant is in line with Costing Standards and Regulations.
• Ad-hoc task assign by management team (Nissan Motor Thailand/Nissan Power Train).
• Qualifications Preferred: Bachelor's degree.
• Proficient in English communication.
• Strong communication and interpersonal skills.
• Proficient in Microsoft Office (Excel, PowerPoint).
• Strong negotiation skills and ability to thrive under pressure.
• Proficient in management and negotiation.
• Excellent interpersonal relations and positive mindset.
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand

Skills:

Compliance, Python, SQL

Job type:

Full-time

• Lead System Analyst/Senior Data Engineer assigns to work on IECC Project and Finance-Risk and Compliance Data initiatives to support solution design and data integration between upstream applications, downstream applications, and business users.
• To design, build, and operate reliable data pipelines across batch, near-real-time, and real-time workloads.
• To utilize multiple technologies (e.g. Python, SQL/Stored Procedures, ETL/ELT tools) to ingest, transform, and deliver governed, audit-ready data.
• To orchestrate and monitor jobs, implement data quality controls, and ensure security, lineage, and observability, while modernizing existing workflows with automation, testing, and performance tuning.
• Build and maintain ingestion, transformation, and delivery pipelines that produce governed, audit-ready datasets.
• Use Python, SQL/Stored Procedures, and ETL/ELT frameworks (or any relevant technologies) to implement scalable and reusable data pipeline components.
• Orchestrate and monitor workloads (e.g., DAGs/schedulers), ensuring reliability, idempotency and rerun ability.
• Enforce data quality (completeness, validity, accuracy, timeliness, uniqueness) and reconciliation checks.
• Ensure security and compliance: access control, PII handling, encryption, and audit logging.
• Design and manage workflow orchestration for reliable execution, monitoring, and failure recovery with Airflow/Control-M/ESP (DAGs, retries, backfills, idempotency).
• Collaborate with Architects/Stewards to apply a Shared Canonical Model (CDM) and data standards.
• Implement security controls (RBAC/ABAC), PII masking, encryption in-transit/at-rest, and auditable logs.
• Maintain runbooks, technical specifications (e.g. data mapping), and contribute to CI/CD (Git, artifacts, release notes).
• Monitor pipelines (SLIs/SLOs), diagnose incidents, and drive continuous performance and cost improvements.
• Promote data literacy and a data-driven culture through cross-functional collaboration..
• Apply now if you have these advantages.
• Bachelor's / Master degree in Computer Engineer, Computer Science, Information Technology, or related fields.
• At least 8-12 years as System Analyst / Data Engineer, 2-3 years in banking industry.
• Strong background in one or more: large-scale data processing, data infrastructure engineering, or data modeling.
• Solid grasp of CDC patterns, schema-drift control, robust error handling, and recovery/replay.
• Proven track record improving pipelines via automation, testing, and performance tuning.
• Exposure to cloud data platforms (AWS/Azure/GCP), Databricks/Spark Structured Streaming is a plus.
• Proficient in Python and SQL (or any relevant programming languages) and be able to apply solid software engineering practices (testing, version control, code reviews).
• Strong SQL (complex queries, optimization) and Python (DB-API/pandas or PySpark) comfortable with Unix shell.
• Experience with one or more: Talend, IBM DataStage, Airflow, Kafka, Spark, Trino/Presto.
• Curious, resilient, and critical thinker, open to feedback and continuous improvement.
• Financial services, risk and regulatory data experience (e.g., IECC, IFRS9, Basel, BOT, AML, Credit Risk, Compliance) is an advantage.
• Why join Krungsri?.
• As a part of MUFG (Mitsubishi UFJ Financial Group), we a truly a global bank with networks all over the world.
• We offer a striking work-life balance culture with hybrid work policies (2 days minimum in office per week).
• Unbelievable benefits such as attractive bonuses, employee loan with special rates and many more..
• Apply now before this role is close. **.
• FB: Krungsri Career(http://bit.ly/FacebookKrungsriCareer [link removed]).
• LINE: Krungsri Career (http://bit.ly/LineKrungsriCareer [link removed]).
• Talent Acquisition Department
• Bank of Ayudhya Public Company Limited
• 1222 Rama III Rd., Bangpongpang, Yannawa, Bangkok 10120.
• หมายเหตุ ธนาคารมีความจำเป็นและจะมีขั้นตอนการตรวจสอบข้อมูลส่วนบุคคลเกี่ยวกับประวัติอาชญากรรมของผู้สมัคร ก่อนที่ผู้สมัครจะได้รับการพิจารณาเข้าร่วมงานกับธนาคารกรุงศรีฯ.
• Remark: The bank needs to and will have a process for verifying personal information related to the criminal history of applicants before they are considered for employment with the bank..
• Applicants can read the Personal Data Protection Announcement of the Bank's Human Resources Function by typing the link from the image that stated below.
• EN (https://krungsri.com/b/privacynoticeen).
• ผู้สมัครสามารถอ่านประกาศการคุ้มครองข้อมูลส่วนบุคคลส่วนงานทรัพยากรบุคคลของธนาคารได้โดยการพิมพ์ลิงค์จากรูปภาพที่ปรากฎด้านล่าง.
• ภาษาไทย (https://krungsri.com/b/privacynoticeth).

Skills:

Compliance, SAP, English

Job type:

Full-time

• Develop and implement comprehensive Trade Compliance programs between Global and manufacturing sites.
• Manage customs and partner government agency authority relationships, including response to government inquiries and audits.
• Assess the risk/ impact of changes of regulation to guide decisions, propose solutions and drive improvements throughout the region.
• Oversee import/export applications, registrations and Customs rulings.
• Provide subject matter expertise in current import and export regulations and requirements, including Harmonized Tariff classification, valuation, country of origin guidance.
• Conduct regular internal review and audits to measure compliance and assess possible risk and violations with recommended corrective action within business operations and practices.
• US export control regulations and US Export Control Classification Number (ECCN).
• Interface with multiple functional teams, to validate critical trade compliance data elements identified within import/export transactions.
• Oversee the development and maintenance of standard operating procedures.
• (SOPs) and internal control for APAC trade compliance.
• Evaluate and implement customs simplification applications to enhance the efficiency and cost-effectiveness of import and export operations.
• Deliver training and educational programs to site on trade compliance requirements and best practices.
• 10+ years of experience in international trade compliance related fields.
• Strong understanding of Trade Compliance principles and proven track record in the Asia region.
• Experience working with US Export controls, SAP and GTS.
• Experience working knowledge of the Electronic or Semiconductor industry.
• Demonstrated expertise in commodity classification and associated regulations.
• Exceptional verbal and written communication skills: able to present effectively at all levels.
• Fluent in English and if able to speak other languages shall be benefits.
• Physical Demands.
• Typical Experience.
• Typical Education.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Compliance, Finance, ERP, English

Job type:

Full-time

• Develop and implement procurement strategies for automotive spare parts, repair equipment, and consumables in alignment with the company s business plan and nationwide service operations.
• Manage and maintain strong relationships with both local and international suppliers and vendors (e.g., spare parts manufacturers, tool providers, lubricant suppliers).
• Negotiate pricing, delivery terms, and payment conditions to achieve competitive costs and drive cost savings.
• Oversee and control spare parts and consumable inventory in collaboration with warehouse and operations teams to prevent out-of-stock or overstock situations (Day on Hand management).
• Ensure and improve product quality standards in compliance with Autobacs Japan Standard before distribution to service centers.
• Monitor and analyze spare parts price trends, new automotive technologies, and competitor activities to support strategic decision-making.
• Lead, coach, and develop the Procurement team with specialized knowledge in automotive parts and supplies.
• Collaborate closely with Operations, Inventory, and Finance teams to optimize purchasing processes and budget utilization.
• Implement and maximize the use of procurement systems (e.g., ERP, Inventory Management) for greater efficiency.
• Bachelor s or Master s degree in Business Administration, Logistics, Automotive Engineering, or related fields.
• At least 8-10 years of experience in procurement or supply chain management within the automotive or auto parts industry.
• Strong knowledge of automotive spare parts, repair tools, product specifications, and technical standards.
• Proven negotiation, cost analysis, and vendor management skills.
• Demonstrated leadership experience with the ability to manage and develop a team.
• Proficient in ERP systems and advanced MS Excel.
• Good command of English (for communication and negotiation with international suppliers).

Experience:

5 years required

Skills:

Project Management, Procurement, Negotiation

Job type:

Full-time

• Manages staff to ensure timely and accurate purchase, movement and control of inventory.
• Maintains responsibility for performance management, development, recognition, coaching and compensation of employees.
• Reassigns personnel as necessary to optimize work.
• Acts as a liaison with customers to ensure forecast commitments are met.
• Maintains continuous material supply, including pricing, on-time delivery, tracking excess and obsolete inventory, maintaining appropriate inventory levels and turns.
• Reviews production schedules and changes to define the material requirements.
• Addresses and resolves possible material shortages.
• Works with other departments to review and dispose of non-conforming materials.
• Acts as a liaison between customer project management and internal departments on the introduction of new product requirements.
• Ensures bill of materials, pricing structure, supplier base, etc., is cost effective.
• Recognizes cost impact of excess and obsolescence and actively seeks return on investment.
• Monitors customer repairs and validates type of warranty and associated costs.
• Works with other departments to meet repair commitments.
• Knowledge/Skills/Competencies.
• Broad knowledge of an electronic manufacturing environment, materials and processes.
• Excellent knowledge of procurement processes, inventory management and supplier management.
• Good understanding of IT concepts and integrated business applications.
• Excellent negotiation and problem resolution skills.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train and motivate a diverse group of employees.
• Typical Experience.
• Requires 5-7 years of relevant experience in procurement, logistics, or supply chain, including supplier and on-time delivery management.
• Must have experience in pricing structure and supplier base management.
• Essential experience includes managing inventory levels, tracking stock, and implementing inventory control procedures.
• Typical Education.
• Bachelor's degree in a related field, or an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Legal, Compliance, Problem Solving

Job type:

Full-time

• Implement Occupational Health related programs including Health Risk Assessment to promote workplaces among the Thaioil group.
• Collaborate with physicians, nurse and or engineers to institute control, remedial measures for hazardous and Occupational Health potentially hazardous conditions.
• Review physician s Health checked report and analyze, study to determine if diseases or illness are job related.
• Investigate accidents to identify causes and to determine how such accidents might be prevented in the future.
• Leading investigate health-related complaints and inspect facilities to ensure that they comply with public health legislation and regulations.
• Prepare reports including site observations, analysis of exposure and recommendation for control and correction of Occupational Health hazards.
• Prepare documents/reports, HRA to be used in legal proceeding.
• Provide specialist supports in Occupational Health issues.
• Advise management on the cost and effectiveness of safety and health programs.
• Develop, review and revise Occupational Health related procedures.
• Develop, and implement Occupational Health structural training courses.
• Develop and maintain workplace monitoring program such as noise surveys, heat, lighting, and chemical in order to ensure compliance with public health legislation and regulations.
• Leading and manage accident related injury illness and record-keeping documentation.
• Liaise with Thaioil group to implement occupational health and surveillance programs.
• To refer to Company's QSHE's policy guidelines when performing, supervising, managing assigned tasks to ensure that QSHE objectives are met with high performance.
• EDUCATION.
• BSC. In Occupational health with minimum 10 years experience of practical orientation.
• EXPERIENCE.
• Knowledge of Occupational health legislations and international code of practices.
• Experience in carrying out Occupational Health Risk assessment or other related risk assessment.
• Ability to demonstrate using of industrial occupational and hygiene equipments i.e. work place condition, toxic health hazards sampling and monitoring etc.
• Technical and analytical ability.
• Critial thinking and problem solving skills.
• Excellent communication and interpersonal skills.
• Negotiation skills to convince managers of the need to implement and maintain safety standards that may compromise speed or efficiency in the organization.
• Ability to understand and analyze complex information and present it simple and accurately.
• Attention to detail.

Experience:

5 years required

Skills:

Compliance, Procurement, Assurance, English

Job type:

Full-time

• Plan, lead, supervise and coordinate to propose business contract strategy and prepare calls for tender packages for vessels chartering and participate in technical and commercial bid evaluation in compliance with procurement process.
• Manage vessel and Marine support service contract, monitor, control and coordinate to ensure vessel s operation/Marine service and SSHE performance meet company requirements.
• Contribute to development and improvement of marine related standards/ procedures/ w ...
• Contribute to study, analyse and propose the marine fleet optimization model and management system to achieve better cost effectiveness, safe and efficient operation.
• Develop, improve and implement vessel assurance program (i.e., vessel inspection, quarterly audit) to assure vessel reliability and safe operation and in compliance with company rules, international regulations and industrial best practice.
• Monitor and control fuel consumption (MGO) of marine vessels to ensure cost efficiency of fuel consumption.
• Provide marine expertise in supporting of all marine operation / related matters as required by offshore operating asset/projects (i.e., incident investigation, mooring pattern design and analysis, weather forecast, Typhoon brief, Marine advisor for rig/barge move, tanker mooring master, risk assessment/HAZID, new development project and Marine navigation chart).
• Provide technical advice, solution in any problems of routine work regarding marine operation and logistics activities.
• Act as TADM of marine equipment to ensure they are available, well maintained and ready for service.
• Prepare, manage and control budgets for all marine activities according to asset work program.
• Being appointed as Emergency Team management member and typhoon advisor to provide advice and guidance to respond emergency and typhoon evacuation.
• Study and seek any new technology, digitalization system for sake of marine fleet improvement leading to Cost effectiveness, efficient operations, SD and SSHE.
• Report key activities and results to line manager.
• Professional Knowledge & Experiences.
• Certificate of Master Mariner Class 1 or Certificate of Chief Engineer Class 1 is preferred.
• Good knowledge of offshore marine operation and logistics business.
• Good Knowledge of offshore marine warranty surveying, Classification Society surveys and/or vessel audits.
• Minimum 5 years experience in Offshore Oil & Gas industry and offshore marine operations.
• Good interpersonal skills and leadership skills.
• Good command of spoken and written English.
• Work Location.
• Bangkok - Resident.

Skills:

Production planning, Excel, Data Entry

Job type:

Full-time

• Plans, organizes, controls and executes a production schedule for a designated product or products including program coordination.
• Develops production schedules based on actual and forecasted customer demand, product demand profiles and knowledge of the customer.
• Analyzes inputs (e.g., capacity, board cycle times, urgency of request, material availability, etc.) to help determine schedule.
• Analyzes internal impact (e.g., line scheduling, procurement, logistics, shipping, etc.) of customer scheduling.
• Ensures quality and integrity of information used to generate materials requirements plan.
• Revises plans as required based on analysis of actuals versus plan.
• Manages issues associated with engineering changes to ensure minimal cost exposure, excess materials and risk to customer shipment.
• Participates in the introduction of new products and supports the transfer/de-transfer of existing products through planning and analyzing of common and unique materials in support of project deadlines.
• Communicates information on materials availability to support build plans throughout the product life cycle.
• Maintains knowledge of customer volume fluctuations and determines the materials required.
• Provides information to procurement on demand variances.
• Develops and communicates short- and long-term commitments to customers to ship products.
• Coordinates necessary resources to meet shipment commitments.
• Reviews and reports on aggregate levels of product inventory, inventory exposure, backlog, availability and on-time delivery.
• Develops recovery plans if missed shipments occur.
• Leads continuous improvement of planning processes.
• Facilitates development of processes and best practice models for outbound order fulfillment.
• Provides leadership and support to employees of NAOF.
• Makes decisions surrounding workload allocation and hiring practices.
• Provides expert role to other sites and other departments for North American Order Fulfillment models and practices.
• Provides training, guidance and may assign work to less experienced employees.
• Knowledge/Skills/Competencies.
• Basic knowledge of an electronic manufacturing environment, materials and processes.
• Basic knowledge of production planning fundamentals, scheduling, materials requirements planning techniques and manufacturing control systems.
• Basic knowledge of purchasing principles, techniques and philosophies.
• Knowledge of basic computer applications such as WORD, Excel, PowerPoint and multiple business applications.
• Basic understanding of customer needs.
• Good analytical and statistical skills.
• Ability to plan strategically for the coordinated build and delivery of one or several products.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional overnight travel may be required.
• Typical Experience.
• Two to Four years relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Skills:

Contracts, Compliance, Assurance

Job type:

Full-time

• Project Planning: Collaborate with stakeholders to define project objectives, scope, goals, and deliverables. Develop comprehensive project plans, schedules, and budgets.
• Team Leadership: Lead cross-functional project teams, including infrastructure engineers, technicians, and other specialists, to ensure effective project execution.
• Resource Management: Allocate and manage project resources, including personnel, equipment, and materials, to meet project goals and timelines.
• Risk Management: Identify, assess, and manage project risks. Develop risk mitigation strategies to minimize potential disruptions.
• Vendor Relations: Liaise with external vendors and suppliers to procure necessary equipment and services, negotiate contracts, and ensure compliance with project requirements.
• Budget Control: Monitor project budgets and expenses, ensuring cost-effective project execution. Prepare and present financial reports to stakeholders.
• Quality Assurance: Establish and enforce quality standards for infrastructure projects. Conduct quality checks and inspections to ensure compliance.
• Timeline Adherence: Manage project schedules, milestones, and timelines. Implement effective project management tools and techniques to track progress.
• ROLE & RESPONSIBILITY.
• Communication: Maintain clear and consistent communication with project stakeholders, providing regular updates on project status, risks, and milestones.
• Issue Resolution: Identify and address project issues and obstacles promptly. Collaborate with teams to find solutions and keep projects on track.
• Change Management: Manage changes to project scope, schedule, and objectives. Assess change requests and their impact on project outcomes.
• Documentation: Create and maintain comprehensive project documentation, including project plans, reports, and documentation of lessons learned.
• Quality Control: Implement quality control processes and ensure that infrastructure projects meet established standards and specifications.
• Post-Implementation Review: Conduct post-implementation reviews to evaluate project success, gather feedback, and identify areas for improvement.
• EDUCATION.
• Bachelor's degree in a relevant field; PMP certification is advantageous.
• Exceptional leadership and team management skills, with the ability to motivate and guide project teams.
• Effective communication and interpersonal skills for stakeholder engagement and collaboration.
• Solid understanding of risk management principles and experience in developing risk mitigation strategies.
• Budget management skills for controlling project costs and expenses.
• Problem-solving abilities and a proactive approach to addressing project challenges.
• Adaptability to changing project requirements and priorities.
• EXPERIENCE.
• At least 5 yrs. experience as an Infrastructure Project Manager, managing complex infrastructure projects from initiation to completion.
• Strong technical knowledge of infrastructure components, including servers, storage, networking, and data centers.
• Proficiency in project management software and tools for scheduling, resource allocation, and reporting.

Skills:

Jenkins, Automation, Python

Job type:

Full-time

• Infrastructure as Code: Design, implement, and maintain infrastructure using tools like Terraform, CloudFormation, or Ansible to manage cloud and on-premises resources.
• CI/CD Pipelines: Develop, manage, and improve CI/CD pipelines using tools such as Jenkins, GitLab CI to ensure reliable and efficient software delivery.
• Automation and Orchestration: Automate repetitive tasks and streamline workflows using scripting languages like Python, Bash, or PowerShell.
• Monitoring and Logging: Implement monitoring and logging solutions to ensure system health and performance, using tools like Prometheus, Telegraf, Grafana, ELK Stack.
• Collaboration: Work closely with development, QA, and operations teams to ensure smooth software releases and effective communication.
• Security: Integrate security practices into the DevOps processes, including vulnerability assessments, access control, and compliance with industry standards.
• Incident Management: Troubleshoot and resolve issues related to application and infrastructure performance, ensuring high availability and reliability.
• Cloud Services Management: Manage and optimize cloud services (e.g., AWS, Google Cloud) for performance, cost, and scalability.
• Documentation: Maintain clear and comprehensive documentation for processes, systems, and procedures.
• Qaulifications.
• Education: Bachelor s degree in computer science, Engineering, or a related field, or equivalent practical experience.
• Experience: [Specify years of experience] years of experience in a DevOps or related role.
• Proficiency in scripting languages (e.g., Python, Bash, Powershell).
• Experience with infrastructure as code tools (e.g., Terraform, CloudFormation).
• Knowledge of CI/CD tools (e.g., Jenkins, GitLab CI).
• Familiarity with containerization and orchestration (e.g., Docker, Kubernetes).
• Strong understanding of cloud platforms (e.g., AWS, GCP).
• Experience with monitoring and logging tools (e.g., Prometheus, Grafana, ELK).
• Understanding of security best practices and tools.
• Preferred.
• Experience with serverless architectures and microservices.
• Experience in a fast-paced, agile development environment.
• Knowledge of network and security configurations in cloud environments.
• Strong problem-solving skills.
• Excellent communication and collaboration abilities.
• Ability to work independently and in a team.
• Certifications: e.g., AWS Certified DevOps Engineer, Google Professional DevOps Engineer are a plus.
• Location: True Digital Park, Bangkok.

Experience:

2 years required

Skills:

Public Relations, Legal, ISO 27001, English

Job type:

Full-time

• Executes cybersecurity engineer tasks including, but not limited to, security patch management, security vulnerability management, and security configuration management.
• Tests, implements, deploys, maintains, reviews, and administers the cybersecurity tools.
• Assist in identifying, prioritizing, and coordinating the protection of critical cyber defense infrastructure and key resources.
• Coordinate with Cyber Defense Analysts to manage and administer the updating of rules and signatures (e.g., intrusion detection/protection systems, antivirus, and content blacklists) for specialized cyber defense applications.
• Identify potential conflicts with the implementation of any cyber defense tools (e.g., tool and signature testing and optimization).
• Operates and maintains production information security systems.
• Ensures proper cybersecurity documentation is in place regarding standard operating procedures.
• Monitors the industry and external environment for emerging threats and advises relevant stakeholders on appropriate courses of action.
• Oversees incident response planning and the investigation of security breaches and assists with any associated disciplinary, public relations, and legal matters.
• Applies expert knowledge and skills to resolve problems, including support concepts and methods, problem isolation and troubleshooting procedures, system and file recovery processes, and operating system and network configurations.
• Prepares and presents cogent and cohesive analyses and briefings advising management on new technological developments, techniques, and enhancements that result in increased time and cost efficiencies.
• Provides advice and assistance to troubleshoot the most complex problems in a manner that minimizes interruptions in the ability to carry out critical business activities.
• Supports rapid response teams in response to customer service problems resulting from catastrophic events such as virus infections or widespread power outages.
• Supports the development of a formal cyber security risk assessment program.
• Supports and assists in maintaining a vulnerability/gap/response assessment program.
• Supports the ongoing maintenance of the cyber-Kill Chain for the company, focusing on phases of cyber-attack and remediation/mitigation for each phase.
• Supports ongoing activities to develop, communicate, and support appropriate standards and risk controls associated with digital data.
• Supports the development and maintenance of a company Data Protection program.
• Responds to cybersecurity alerts.
• Cascade and leverage cybersecurity control and practice to the entire company group.
• Bachelor s or Master s degree in Computer Engineering, MIS, IT, or a related field.
• At least 2 years experience in computer security and 5 years in IT infrastructure.
• Have a foundation in good information security practices.
• Knowledge of International Security frameworks, Standards, and Guidelines, e.g., COBIT, NIST-800, ISO 27001, PCI-DSS, OWASP, etc.
• Experience in Security tools, e.g., EDR, ATP, WAF, IPS/IDS, Deception, TI/TIP, Anti DDoS.
• Experience in Cloud Environments, e.g., Google Cloud, AWS, Microsoft Azure.
• Experience with system and application security management and control.
• Experience with system, network, and OS hardening techniques. (e.g., remove unnecessary services, password policies, network segmentation, enable logging, least privilege, etc.).
• Experience with facilitating information security risk assessments.
• Technical writing, documentation development, process mapping, and visual communication skills.
• Hands-on experience with computer programming languages and/or scripting languages such as Python, Java, and Shell for automation.
• Professional certificates related to work (e.g., CISSP, CISM, AWS Certified Security, or similar general security certification) are desirable.
• Talent to identify and create a broad vision for a security solution and to execute it;.
• Systems Thinking - the ability to see how parts interact with the whole (big picture thinking).
• Proven experience of acting as an expert in project teams.
• A positive, can-do attitude who naturally expresses a high degree of empathy to others.
• Ability to explain your thoughts or findings also to non-technical professionals.
• Strong problem-solving and analytical abilities Able to work under minimal supervision, detail oriented.
• Excellent English (Spoken and Written).
• Location: True Digital Park, Punnawithi.

Skills:

Petrochemical, Problem Solving, English

Job type:

Full-time

• 3 yrs and up experience in commercial operation/ logistic/ terminal or warehouse operation experience in petroleum, petrochemical or related business.
• Strong customer relationship skillsStrong problem solving, decision making, logical thinking and analytical skills.
• Strong command in English language.
• Good computer skills.
• EDUCATION.
• Bachelor s Degree in Logistics management, Science, Engineering, or related field.
• Good operational and technical background, with excellent organizational skills
• Excellent managerial skills, with strong interpersonal and communication skills.
• ROLE & RESPONSIBILITY.
• To manage stock control, reconcile and propose to adjust Inbound & Outbound shipment, Storage inventory and ullage, Stock of drums, containers and Warehouse space and utilization.
• Arrange suitable carrier for product replenishment with vessel owner and supply chain coordinator to ensure operational effectiveness of land logistics throughout the supply chain.
• Control and monitor product Dispatching to ensure effective delivery management.
• Manage Operation schedule of product loading and unloading both truck and vessel modes, including drum filling.
• Ensure optimally operating with Cost effectiveness, Asset utilization and Loss reduction.
• Carry out product blending and packaging activities as well as ensure quality and specification as per defined parameter and proper selection of packaging material for each product type.
• Be a focal point for government-related and excise matters.
• Adopt Shell and TOP Group HSSE standards with the service provider terminal and warehouses.
• Ensure Regulatory Compliance to related Laws and Authorities.
• Manage problem solving-Operation issues.