เงื่อนไขการค้นหา

ทักษะ:

English

ประเภทงาน:

งานประจำ

• key.
• Perform installation, static, functional, dynamic, and commissioning tests on railway signalling systems and equipment to ensure compliance with approved specifications and testing requirements. Test and verify signalling components including signals, points, track circuits, axle counters, train detection systems, interlockings, level crossings, power supplies, and emergency operating functions. Conduct all testing activities in accordance with railway safety standards, establish testing boundaries ...

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Leadership Skill, Teamwork, Cloud Computing

ประเภทงาน:

งานประจำ

This role leads the strategic development and execution of machine learning initiatives within the organization. As a supervisor Machine Learning Engineers, the role involves setting the technical direction, overseeing project delivery, and ensuring the team's alignment with business objectives. Machine Learning Specialist will also collaborate with cross-functional teams to ensure that ML solutions are efficient, scalable, and impactful. Duties and Responsibility Define the strategy and roadmap for machine learning initiatives across the organization. Provide technical guidance, p ...

ทักษะ:

AutoCAD

ประเภทงาน:

งานประจำ

• วุฒิการศึกษาระดับ ปวช. ปวส. หรือปริญญาตรี สาขาวิศวกรรมโยธา วิศวกรรมเครื่องกล บริหารงานก่อสร้าง หรือสาขาอื่นที่เกี่ยวข้อง.
• มีประสบการณ์ด้านงานประมาณราคา งานก่อสร้าง หรืองานระบบอาคาร (M&E: Mechanical & Electrical) อย่างน้อย 3 ปี.
• สามารถถอดปริมาณวัสดุ คำนวณต้นทุน และจัดทำ BOQ ได้.
• สามารถอ่านแบบ Drawing, Layout, Piping Diagram หรือเอกสารทางเทคนิคได้.
• สามารถใช้งาน AutoCAD, Microsoft Excel และโปรแกรมที่เกี่ยวข้องได้เป็นอย่างดี.
• หากมีประสบการณ์ด้านระบบปั๊มน้ำ คูลลิ่งทาวเวอร์ ระบบน้ำเย็น (Chilled Water System) ระบบดับเพลิง หรือระบบสาธารณูปโภค (Utility System) จะได้รับการพิจารณาเป็นพิเศษ.
• สามารถเดินทางไปสำรวจหน้างาน ประชุม หรือพบลูกค้านอกสถานที่ได้.
• มีใบอนุญาตขับขี่รถยนต์.
• มีความรับผิดชอบ ละเอียดรอบคอบ มีทักษะการสื่อสารที่ดี และสามารถทำงานเป็นทีมได้.

ทักษะ:

Product Testing, Data Analysis, Electronics, Automation, Python

ประเภทงาน:

งานประจำ

• Develop, implement, and optimize test plans and procedures for electronic systems and devices, including end-of-line testing and performance validation.
• Design electronic circuits and support test systems for a variety of products, including but not limited to amplifiers, power supplies, signal processing units, and communication modules.
• Conduct detailed electronics testing, utilizing oscilloscopes, spectrum analyzers, multimeters, and signal generators to assess voltage, current, frequency response, an ...
• Collaborate with cross-functional teams to ensure the seamless integration of electronic and acoustic components, especially for products requiring precise sound quality.
• Perform root cause analysis and failure analysis for electronics and acoustics issues, providing solutions to enhance product reliability.
• Conduct acoustic tests for relevant products, measuring parameters such as frequency response, distortion, sound pressure levels, and signal-to-noise ratios, using tools like Audio Precision or SoundCheck.
• Prepare comprehensive reports on test results, failure analysis findings, and recommendations for product improvements, focusing on both electronics and acoustics performance.
• Research and apply the latest techniques in electronics testing, automation, and data analysis to enhance testing accuracy and efficiency.
• Work closely with design and product engineering teams to validate and troubleshoot product designs, particularly for audio-related electronic systems.
• Bachelor's or Master's degree in Electronic Engineering, Computer Engineer, Electronics Engineering, or a related field. Acoustics or Audio Engineering knowledge is a plus.
• Proven experience as an Electronics Engineer, Test Development Engineer, or similar role, with a focus on electronics testing and tester development.
• Strong understanding of electronics testing principles, circuit design, and troubleshooting, with hands-on experience using test equipment such as oscilloscopes, multimeters, signal generators, RF, and power supplies.
• Proficiency in data analysis and test automation, using tools like Python, TestStand, or LabVIEW for product testing.
• Strong problem-solving skills with an analytical approach to electronics and acoustic challenges.
• Excellent communication skills, with experience in documenting test procedures, results, and analysis.
• Ability to work collaboratively across design, hardware, and testing teams to drive product quality.
• (Option) Familiarity with acoustic measurement tools (e.g., Smart, Klippel, SoundCheck, Audio Precision) and a foundational understanding of audio/acoustic principles such as frequency response and signal-to-noise ratio.
• https://www.tymphany.com/.
• Facebook: https://www.facebook.com/Tymphany.TH/.

ทักษะ:

Industrial Engineering, Electronics

ประเภทงาน:

ฝึกงาน

• Conduct time studies for manufacturing processes.
• Support production layout design and improvement.
• Perform line balancing to improve productivity and reduce bottlenecks.
• Prepare, review, and update Work Instructions (WI).
• What we're looking for.
• Currently pursuing a bachelor's degree in Industrial Engineering or a related field.
• Basic knowledge of manufacturing processes and industrial engineering principles.
• Proficient in Microsoft Office, especially Excel.
• Good analytical and problem-solving skills.
• Detail-oriented with good communication and teamwork skills.
• About us.
• Thai Toshiba Electric Industries Co., Ltd. is a subsidiary of the globally renowned Toshiba Corporation, with a strong commitment to excellence in electronics manufacturing. We are dedicated to delivering high-quality products whilst maintaining operational efficiency and fostering a culture of continuous improvement. Our company values innovation, technical expertise, and the professional development of our team members. We take pride in our contribution to Thailand's industrial sector and our reputation as a leading manufacturer in the region.
• What we offer.
• We provide a supportive and collaborative working environment where you will gain hands-on experience in industrial engineering. During your internship, you will work alongside experienced engineers who are committed to your professional development. We offer the opportunity to apply theoretical knowledge in practical situations, develop valuable technical skills, and build a foundation for your engineering career. This contract role provides flexibility whilst allowing you to contribute meaningfully to our operations and gain insights into the manufacturing industry.
• If you are a motivated engineering student or graduate eager to develop your industrial engineering skills and make an impact within a leading manufacturing organisation, we would like to hear from you. Please submit your CV, academic transcript, and a cover letter outlining your interest in industrial engineering and what you hope to gain from this internship. Join Thai Toshiba Electric Industries Co., Ltd. and take the first step in your engineering career.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Location: RD Center, Samutprakarn.
• Department: R&D - ICTBG/TISBU.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Ener.

ทักษะ:

Electronics

ประเภทงาน:

งานประจำ

• Expatriates are welcome but have to had experiences related to the requirements (At least 7+years of experience).
• Opportunity to work in international environment.
• Career growth opportunity.
• Good command of spoken and written English.
• Perform circuit analysis, stability analysis, circuit simulation, component selection including technical documentation.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with mechanical engineer, FW engineer to ensure design success until reliably manufacturing.
• Bachelor Degree in Electrical Engineering with good circuit analysis skill or Master's Degree in power electronics industry.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Electronics

ประเภทงาน:

งานประจำ

• Perform circuit design, circuit simulation and analysis.
• Perform component selection and verification.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with other design teams and production line.
• Bachelor Degree in Electrical/Electronic Engineering with good circuit analysis skill or Master's degree in power electronics industry.
• 3-5 years of related experience.
• Strong background on electrical design and power electronic circuit design (high frequency design for power supply, PWB layout, Magnetic component design and Digital Control Systems).
• Understood EMC, EMI and Power line testing.
• Understood Safety requirement (ex. creepage and clearance distances for high voltage design).
• Have experience in Circuit/Control Simulation and Analysis Software (ex. PSIM, MATLAB, etc.).
• Verbal and written English communication skills.
• Able to communicate in Mandarin language will be advantage.
• Professional working attitude, high responsibility and good team work.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Perform magnetics design calculation and power loss analysis such as PFC choke, Transformer, Resonant inductor, EMI filter.
• Perform magnetics simulation in Finite Element Analysis Software such as FEMM, Ansys, Quickfield.
• Perform magnetics design for manufacturing.
• Coordinate with other R&D centers in different countries.
• Master's Degree in power electronics or machine design or experienced from related industry or PhD degree.
• Ability to troubleshoot and analyze technical problems in details.
• Able to use some simulation software, MathCAD or writing some script languages.
• Verbal and written communications skills.
• Professional working attitude, high responsibility and good teamwork.
• Strong background on magnetics design.
• Background on power electronics.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Expatriates are welcome but have to had experiences related to the requirements (At least 5+years of experience).
• Opportunity to work in international environment.
• Career growth opportunity.
• Good command of spoken and written English.
• Perform circuit analysis, stability analysis, circuit simulation, component selection including technical documentation.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with mechanical engineer, FW engineer to ensure design success until reliably manufacturing.
• Bachelor Degree in Electrical Engineering with good circuit analysis skill or Master's Degree in power electronics industry.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Bachelor's degree or above in Electronic Engineering, Electrical Engineering, Mechanical Engineering.
• Initiative, high responsibility and good teamwork.
• Professional working attitude, high responsibility and good teamwork, Eager to learn new things & technology: most important.
• Interest in R&D work and eager to be part of team to develop green technology for better world.
• Cooperate with Colleagues in Thailand factory and RD center in China.
• Utilize FMEA (DFMEA/PFMEA) to identify design and process defects and drive design optimization.
• Acquire structured logical analysis tools such as 5Why, Fishbone diagram, Is/Is Not (separation analysis), etc.
• Be capable of independently leading the 8D problem-solving process and promoting the thorough improvement of issues during the R&D and trial production stages.
• Have DOE (experimental design) awareness to verify key parameters and be able to conduct data analysis using SPC (statistical process control).Verbal and written communications skills in English, knowing Chinese is a plus.
• Able to travel oversees China.
• I. Quality Assurance during Design Phase.
• Participate in the design review of power modules to ensure that the design meets quality and reliability requirements.
• Promote design risk assessment (such as DFMEA), assist in identifying potential failure modes and formulating preventive measures.
• Review design output documents (such as specifications, BOM, drawings) to ensure clear quality requirements.
• II. New Product Introduction (NPI) Quality Management.
• Support quality monitoring and problem tracking during sample trial production and engineering verification (EVT/DVT/PVT) stages.
• Assist in developing process quality control points (such as Control Plan, SOP, QC tools).
• Promote quality risk assessment and improvement before mass production (such as yield analysis, DOE, process capability analysis).
• III. Handling and Improving Quality Issues.
• Lead the analysis and handling of quality issues during the R&D stage (such as test failures, customer complaints).
• Use quality tools (8D, 5 Whys, Ishikawa) for root cause analysis and drive improvements.
• Follow up on the implementation and effectiveness verification of improvement measures to prevent the recurrence of problems.
• IV. Quality Data Management and Reporting.
• Establish and maintain quality data (such as yield, failure rate, test pass rate), conduct trend analysis.
• Regularly produce quality reports to support R&D decisions and management review.
• Assist in establishing quality KPIs to drive the quality awareness and goal achievement of the R&D team.
• V. Quality System and Compliance Support.
• Ensure that the R&D process complies with quality management systems and safety regulations such as ISO, IATF, IEC.
• Support internal audits and customer audits, prepare relevant quality documents and technical explanations.
• Promote standardization of quality processes and continuous improvement (such as document management, process optimization).
• VI. Supplier Quality Collaboration.
• Participate in supplier selection and technical evaluation to ensure that their quality capabilities meet the requirements of power modules.
• Assist suppliers in introducing quality standards and monitor their incoming material quality performance.
• Handle supplier quality issues and drive improvements and verification.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Materials structure design, custom parts specification define, product assembly define and advice, thermal & acoustic noise plan for telecom, server and networking product.
• To support all mechanical related activities, including mechanical design, mechanical design verification tests, reliability engineering test support, design review meeting, customer conference call, factory DFM and supplier DFM review and factory build support.
• Basic structure analysis and verify.
• Product reliability failure mode root cause analysis and solutions.
• Cross function communicates, guideline define, maintain and achieve.
• Create BOM, specification for control the assembly.
• Design for cost optimization.
• Bachelor/Master Degree in Mechanical.
• 5-10 years of related experience in related fields.
• Expatriates are welcome but have to had experiences related to the requirements (At least 5+years of experience).

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Junior Failure Analysis (FA) Engineer.
• Bachelor's Degree in Power Electronics and Electronics Engineering or related field.
• 2-3 years of experience in electronic engineering, product testing, debugging, or failure analysis.
• Experience in power electronics domain is a plus.
• Basic knowledge of power converter circuits, semiconductor devices, and electronic components.
• Hands-on experience with laboratory equipment such as oscilloscope, multimeter, and electronic load.
• Strong willingness to learn failure analysis methodologies and troubleshooting skills.
• Senior Failure Analysis (FA) Engineer.
• Bachelor's degree in electrical / Electronics Engineering or related field.
• 4-5+ years of experience in failure analysis or electronic engineering field.
• Solid experience in power electronics domain such as AC/DC, DC/DC converters, SMPS is strongly preferred.
• Strong capability in root cause analysis of electrical, thermal, and manufacturing-related failures.
• Proficient in advanced FA tools and techniques including waveform analysis, stress evaluation and thermal analysis.
• Ability to lead FA activities, mentor junior engineers, and communicate directly with customers.
• General.
• Requirements (Applicable to All Levels).
• Good analytical thinking and problem-solving skills.
• Clear verbal and written communication skills in English.
• Ability to work cross-functionally with design, manufacturing, quality, and customer teams.
• Professional working attitude, high responsibility, and strong teamwork.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.

ทักษะ:

Quality Assurance, Safety Management, Assurance

ประเภทงาน:

งานประจำ

• Be able to work in Suvarnabhumi Airport (BKK).
• Provide support to Quality Assurance Manager in regard to the auditing function of technical quality assurance, provide standards, processes and services to the airline.
• Audit and report about TVJ aircraft that are maintained that approved by CAAT, Manufacturer, or Vendors.
• Ensure that certifying staff approval/authorization system is implemented and maintained for the control of staff approval/authorization worldwide.
• Ensure that adequate records are kept for all works undertaken, for the required time scales, and in suitable conditions.
• Perform audits and reports of AOC system and contracted (if any) organization's procedures, contracted aircraft maintenance or contracted services ensuring that contracted services are in compliance with signed contracts enabling to TVJ operate in accordance with approved documents and standards.
• To monitor, supervise mandatory requests and changes of aircraft maintenance process.
• Control aircraft documents, forms, procedure, Certificate of Authorization/Approval and stamps issued by TVJ.
• Carry out the quality audit of the line station maintenance and production audit.
• Implement of the quality assurance audit plan and performing the quality reports.
• Certificate of Authorization/Approval to submit Director SSQA or his authorized person to approval.
• Maintain appropriate technical records for SSQA Department.
• Apply the aircraft delivery & acceptance process such as aircraft registration, Certificate of Airworthiness and Certificate of Registration to CAAT when new aircraft into Thai VietJet Air fleet.
• Other assignments from the direct Manager.
• NEW GRADUATES ARE WELCOME TO APPLY.
• Bachelor's degree in Aeronautical technical or any related field.
• No experience required.
• Qualifications in Engineering/ Maintenance fields.
• Proven background knowledge engineering and maintenance, safety management, Quality assurance and human factors; and Quality Auditor Qualification.

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Materials structure design, custom parts specification define, product assembly define and advice, thermal & acoustic noise plan for telecom, server and networking product.
• To support all mechanical related activities, including mechanical design, mechanical design verification tests, reliability engineering test support, design review meeting, customer conference call, factory DFM and supplier DFM review and factory build support.
• Basic structure analysis and verify.
• Product reliability failure mode root cause analysis and solutions.
• Cross function communicates, guideline define, maintain and achieve.
• Create BOM, specification for control the assembly.
• Design for cost optimization.
• Bachelor/Master Degree in Mechanical.
• 5-10 years of related experience in related fields.
• Expatriates are welcome but have to had experiences related to the requirements (At least 5+years of experience).

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Electronics, Automation

ประเภทงาน:

งานประจำ

• Junior Failure Analysis (FA) Engineer.
• Bachelor's Degree in Power Electronics and Electronics Engineering or related field.
• 2-3 years of experience in electronic engineering, product testing, debugging, or failure analysis.
• Experience in power electronics domain is a plus.
• Basic knowledge of power converter circuits, semiconductor devices, and electronic components.
• Hands-on experience with laboratory equipment such as oscilloscope, multimeter, and electronic load.
• Strong willingness to learn failure analysis methodologies and troubleshooting skills.
• Senior Failure Analysis (FA) Engineer.
• Bachelor's degree in electrical / Electronics Engineering or related field.
• 4-5+ years of experience in failure analysis or electronic engineering field.
• Solid experience in power electronics domain such as AC/DC, DC/DC converters, SMPS is strongly preferred.
• Strong capability in root cause analysis of electrical, thermal, and manufacturing-related failures.
• Proficient in advanced FA tools and techniques including waveform analysis, stress evaluation and thermal analysis.
• Ability to lead FA activities, mentor junior engineers, and communicate directly with customers.
• General.
• Requirements (Applicable to All Levels).
• Good analytical thinking and problem-solving skills.
• Clear verbal and written communication skills in English.
• Ability to work cross-functionally with design, manufacturing, quality, and customer teams.
• Professional working attitude, high responsibility, and strong teamwork.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.

ทักษะ:

Compliance

ประเภทงาน:

งานประจำ

• Supervising, supporting, controlling, and reporting to ensure safe, efficient, and successful delivery to determine compliance with regulations and applicable standards.
• Being responsible for quality control of the mechanical work to ensure execution is in line with the contract and applicable permit.
• Supporting engineering with respect to assessing technical documentation before management approval.
• Able to monitor and control the contractors to ensure that the work is in accordance with engineering procedures and meet project timelines..
• Bachelor's degree or higher in Mechanical Engineering.
• Minimum 5 years' experience in Mechanical inspection or related fields.
• Experience in construction and installation work would be an advantage.
• Experience in the mechanical project would be an advantage.
• Engineering license is required.
• Strong understanding of quality control standards and testing techniques.
• Good command in English (Minimum 600 TOEIC score).
• Ability to travel/ work upcountry and abroad.
• The workplace is in Rayong.
• Goal-Oriented, Unity, Learning, Flexible.

ประเภทงาน:

งานประจำ

• We're committed to bringing passion and customer focus to the business.
• If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!.

ทักษะ:

Compliance, Procurement

ประเภทงาน:

งานประจำ

• Supervise marine civil works to ensure compliance with EPC requirements, safety, quality, and schedule.
• Review engineering drawings, specifications, method statements, and technical documents for constructability.
• Coordinate with engineering, procurement, construction, and contractors to resolve technical issues.
• Monitor marine construction activities, including piling, jetties, wharves, dredging, and marine foundations.
• Ensure contractors perform works according to approved designs, standards, and project timelines.
• Bachelor's degree or higher in Civil Engineering.
• Minimum 5 years' experience in civil inspection or related fields.
• Experience in construction work would be advantage.
• Experience in the Civil or Marine infrastructure project would be an advantage.
• Engineering license is required.
• Strong understanding of quality control standards and testing techniques.
• Good command in English (Minimum 750 TOEIC score).
• Ability to travel/ work upcountry and abroad.
• Workplace is in Rayong.
• Goal-Oriented, Unity, Learning, Flexible..