เงื่อนไขการค้นหา

ประสบการณ์:

15 ปีขึ้นไป

ทักษะ:

Research, Electronics, Data Entry

ประเภทงาน:

งานประจำ

• Design, develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate with other engineers including reviews of their work.
• Review and interpret customer documentation, conduct appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Recommend system modifications.
• PCB layout Design, Schematic by using Allegro Candence Software.
• Participate in HW/Layout review.
• PCB stack up review.
• Work with the Electrical and Mechanical Engineers to ensure the design meets all requirements from an electrical performance and mechanical enclosure perspective.
• Create and export manufacturing files ( drawing, gerber ) and review DFM/DFT with Manufacturing team.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Bachelor s degree in Electronics Engineering, or equivalent experience.
• 10+ years experience of PCB high speed layout design using industry standard PCB design.
• Experience with using Allegro Cadence software.
• Experience with high current density designs.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 10 to 15 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

7 ปีขึ้นไป

ทักษะ:

Assembly, Data Entry, Electronics

ประเภทงาน:

งานประจำ

• Review process, product and identify the new technology, new component, new process. Then provide a solution and development for the new component/ new process/ new technology for PCBA.
• Generate the library history of stencil design and PCBA for traceability.
• Work closely with the design team, customers, supplier, and CTH internal team..
• Design tooling and develop the process to support the new technology or new process of PCBA assembly..
• Work with CFT and customer on NPI development, process validation with FA lab technique to make successful transfer from NPI to mass production..
• Other duties as assigned.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• Minimum 7 years relevant experience..
• Typical Education.
• Bachelor degree of Engineering or equivalent of Electronics/Electrical, Telecommunication, computer or related fields..
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Assembly, Procurement, Quality Assurance

ประเภทงาน:

งานประจำ

• Mechanical design of fiber-optic pump packages and components.
• Mechanical design of fixture/tooling and equipment for fiber-optic component manufacturing.
• Generate conceptual design, layout, prototyping, bill of materials, piece part and assembly drawings.
• Working closely with optical, process and device engineers for design optimization and NPI (New Production Introduction).
• Interact with vendors for piece parts specification, procurement, and quality assurance.
• Select vendors and complete first article qualification.
• Perform component qualification and generate reports.
• Document engineering reports, engineering drawings, and equipment design specifications.
• We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Problem Solving, Linux, Data Entry

ประเภทงาน:

งานประจำ

• Support Hardware and Software Team in bring up and validation of Networking, Storage, and Server products during NPI phase per Hardware validation Test Plan.
• Setup the and manage Test Rack, Test equipment and Unit Under Test for hardware validation.
• Work with cross-functional teams to troubleshoot and address any hardware issues identified during validation.
• Bachelors Degree in Electronic Engineering, Computer Engineering, Telecom Engineering or equivalent.
• 0-5 years of experience with hardware testing and validation.
• Familiar with electrical design tools such as Logic analyzer, Oscilloscopes.
• Familiar with common communication protocol such as I2C, SPI, DDR, PCIe, USB, Ethernet, SATA, NVMe.
• Hands-on lab debugging, diagnostic errors. Problem solving and corrective actions.
• Familiar with Linux environment and Ethernet protocol.
• Self-motivated with a strong multidisciplinary background.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Knowledge in Analog circuit design and Digital circuit design.
• Knowledge in Electronic component.
• Knowledge electrical design tools such as Logic analyzer, Oscilloscopes.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 0-3 years of experience with hardware Design.
• Typical Education.
• Bachelors Degree in Electronic Engineering, Computer Engineering, Telecom Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประเภทงาน:

งานประจำ

• Part ordering schedule management (firmed orders, forecast, and emergency part requirements) to meet the Corporate's sales demand and manufacturing requirement.
• Part System parameter maintaining and controlling.
• Part Inventory Control and Part Inventory day optimization.
• Liaison with oversea, local suppliers and logistics/freight providers for smooth part delivery as planned (on-time delivery with the right part and right place) Day to day part control (Stock alarms, Back order, Design changes, Schedule changes, Excess stock monitor,) Cross functional activities for Kaizen (Q, T, C improvement).
• Qualifications Bachelor's degree in Engineering (IE) / Bachelor's degree in Business Administration (Supply Chain /Logistics).
• Experiences in Material Planning, Material Requirement Plan & Inventory Management. Parts Control Background.
• Automotive Manufacturing.
• Supplier management will be advantage.
• Good in English (TOEIC 600).
• If you are interested in this job role, please prepare your updated resume or LinkedIn profile for the application process through the Nissan Job Portal.
• Only shortlisted candidate will be contacted for an interview".
• For more information about Nissan's products, services, and commitment to sustainable mobility, visit nissan-global.com. You can also follow us on Facebook, Instagram, X and LinkedIn and see all our latest videos on YouTube.
• Why Nissan?.
• You will definitely get the right answers why you should join us through watching the video on YouTube.
• Samut Prakan Thailand

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Research, Product Design, Python, English

ประเภทงาน:

งานประจำ

• Work independently to develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
• Attend and interact in technical customer meetings.
• Provide high level test hardware and software solution architecture.
• Review equipment data sheets and select appropriate equipment based on requirements.
• Support creation of structural or functional test strategy and test plan to meet project goals and requirements.
• Support creation of technical proposals with costed BOM and hours estimates.
• Ability to research and comprehend relevant product technologies and skills associated with product technologies.
• Develop production test strategies based on product design specification.
• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focussing on cycle time and yield.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keep up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Strong knowledge on test development (SW and Test fixtures).
• Proven strong knowledge on test programming development (Python, Labview / Test Stand).
• Familiarity with Altium Designer and PCB fabrication.
• Knowledge on fixtures design, setup/integration.
• Good verbal, and written communication skills both Thai and English.
• Must have experience with disciplined operations..
• Must have experience working with and coordinating well with multiple intercompany organizations..
• Typical Experience.
• Minimum of 3+ years of experience Structural and Functional Test development / support for electronic / automotive industry.
• Typical Education.
• Engineering Degree in Electronics or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Research, Product Design, Python, English

ประเภทงาน:

งานประจำ

• Develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate other engineers including reviews of their work.
• Reviews and interprets customer documentation, conducts appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Provide high level test hardware and software solution architecture.
• Create structural or functional test strategy and test plan to meet project goals and requirements.
• Create technical proposals with costed BOM and hours estimates.
• Create product test requirements with guidance from senior staff and collaboration with customer designers.
• Provides Technical program management for small projects.
• Develop production test strategies based on product design specification.
• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focusing on cycle time and yield.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keeping up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Strong knowledge on test development (SW and Test fixtures).
• Proven strong knowledge on test programming development (Python).
• Knowledge on fixtures design, setup/integration.
• Ability to create technical proposals (solution and timelines) based on requirements.
• Ability to multitask and operate in cross functional development teams.
• Good verbal, and written communication skills in English.
• Typical Experience.
• Minimum of 5+ yrs of experience Structural or Functional Test development / support for electronic / automotive industry.
• Must have experience with disciplined operations.
• Must have experience working with and coordinating well with multiple intercompany organizations.
• Typical Education.
• Degree or higher in Electronics Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Research, Product Design, Python, English

ประเภทงาน:

งานประจำ

• Work independently to develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
• Attend and interact in technical customer meetings.
• Provide high level test hardware and software solution architecture.
• Review equipment data sheets and select appropriate equipment based on requirements.
• Support creation of structural or functional test strategy and test plan to meet project goals and requirements.
• Support creation of technical proposals with costed BOM and hours estimates.
• Ability to research and comprehend relevant product technologies and skills associated with product technologies.
• Develop production test strategies based on product design specification.
• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focussing on cycle time and yield.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keep up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Strong knowledge on test development (SW and Test fixtures).
• Proven strong knowledge on test programming development (Python, Labview / Test Stand).
• Familiarity with Altium Designer and PCB fabrication.
• Knowledge on fixtures design, setup/integration.
• Good verbal, and written communication skills both Thai and English.
• Must have experience with disciplined operations..
• Must have experience working with and coordinating well with multiple intercompany organizations..
• Typical Experience.
• Minimum of 3+ years of experience Structural and Functional Test development / support for electronic / automotive industry.
• Typical Education.
• Engineering Degree in Electronics or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

4 ปีขึ้นไป

ทักษะ:

Compliance, Project Management, Excel, English

ประเภทงาน:

งานประจำ

• Supports generation of performance metrics for products and processes of relatively low complexity, and drives the team to achieve Quality Goals set by management (i.e.: DPQL, Total Quality at Celestica (TQ@C)), following industry standards such as ISO, IPC, AS, TL.
• Leads Quality Improvement Programs (QIP) in support of customer requirements and expectations that are considered small in scale and low in complexity.
• Mentors and trains personnel in the practices of Quality management and Quality impr ...
• Resolves customer issues of low difficulty using quality tools: Root Cause Analysis and Corrective Actions that are effective and timely.
• Provides leadership and support in a variety of areas such as, analysis of nonconforming materials and customer return material authorizations.(RMA's), coordinating ESD compliance, supporting customer and 3rd party audits, and the administration of Quality management (Documentation, Change Control, Corrective & Preventive Actions and Calibration).
• Supports new customer qualification and New product introduction with supplier assessments, First Article Inspections and oversee generation of product documentation for products / programs that are relatively low risk.
• Knowledge/Skills/Competencies.
• In-depth knowledge of quality metrics, ISO standards and processes.
• Knowledge of Lean and Six Sigma Manufacturing processes and controls including: Statistical Process Control (SPC), 5S and Value Stream Mapping (VSM).
• Good knowledge of Quality Management tools including: Failure Mode and Effect Analysis (FMEA) and development of Quality Control Plans.
• Strong Project Management Skills.
• Ability to coordinate a wide variety of resources to meet production quality and quantity metrics.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train and motivate a diverse group of employees to achieve high production levels within tight time deadlines and in a ~highly dynamic manufacturing environment.
• Ability to use some or all of the following PC applications: Google Applications, Word, Excel, and PowerPoint.
• Strong knowledge of the manufacturing processes.
• Excellent communication in English.
• Typical Experience.
• 8 years total working experiences with at least 4-6 years in manager/supervisor roles.
• Industry expereinces in Electronics Manufacturing or Automotive.
• Typical Education.
• Bachelor's Degree in related field of study, Engineering is preferred.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.