Filter Jobs

Experience:

5 years required

Skills:

Electronics, Matlab, English

Job type:

Full-time

• Perform circuit design, circuit simulation and analysis.
• Perform component selection and verification.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with other design teams and production line.
• Bachelor Degree in Electrical/Electronic Engineering with good circuit analysis skill or Master's degree in power electronics industry.
• 3-5 years of related experience.
• Strong background on electrical design and power electronic circuit design (high frequency design for power supply, PWB layout, Magnetic component design and Digital Control Systems).
• Understood EMC, EMI and Power line testing.
• Understood Safety requirement (ex. creepage and clearance distances for high voltage design).
• Have experience in Circuit/Control Simulation and Analysis Software (ex. PSIM, MATLAB, etc.).
• Verbal and written English communication skills.
• Able to communicate in Mandarin language will be advantage.
• Professional working attitude, high responsibility and good team work.

Experience:

5 years required

Skills:

Electronics

Job type:

Full-time

• Perform circuit design, circuit simulation and analysis.
• Perform component selection and verification.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with other design teams and production line.
• Bachelor Degree in Electrical/Electronic Engineering with good circuit analysis skill or Master's degree in power electronics industry.
• 3-5 years of related experience.
• Strong background on electrical design and power electronic circuit design (high frequency design for power supply, PWB layout, Magnetic component design and Digital Control Systems).
• Understood EMC, EMI and Power line testing.
• Understood Safety requirement (ex. creepage and clearance distances for high voltage design).
• Have experience in Circuit/Control Simulation and Analysis Software (ex. PSIM, MATLAB, etc.).
• Verbal and written English communication skills.
• Able to communicate in Mandarin language will be advantage.
• Professional working attitude, high responsibility and good team work.

Experience:

5 years required

Skills:

Electronics

Job type:

Full-time

• Perform circuit design, circuit simulation and analysis.
• Perform component selection and verification.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with other design teams and production line.
• Bachelor Degree in Electrical/Electronic Engineering with good circuit analysis skill or Master's degree in power electronics industry.
• 3-5 years of related experience.
• Strong background on electrical design and power electronic circuit design (high frequency design for power supply, PWB layout, Magnetic component design and Digital Control Systems).
• Understood EMC, EMI and Power line testing.
• Understood Safety requirement (ex. creepage and clearance distances for high voltage design).
• Have experience in Circuit/Control Simulation and Analysis Software (ex. PSIM, MATLAB, etc.).
• Verbal and written English communication skills.
• Able to communicate in Mandarin language will be advantage.
• Professional working attitude, high responsibility and good team work.
• Subscribe To Our Newsletter.
• Get the latest news about Delta Electronics (Thailand) products, solutions and events!.
• Enter email address.
• Connect with us.
• Get in touch with us.
• Contact Form.
• About Us.
• Delta Overview.
• Milestones & Achievements.
• Board & Management.
• Corporate Governance.
• Research & Development.
• Global Operations.
• FAQs.
• Solutions.
• Industrial Automation Solutions.
• Building Automation Solutions.
• Data Center Solutions.
• Telecom Energy Solutions.
• Smart Energy Solutions.
• Display and Monitoring Solutions.
• EV Charging Solutions.
• products & services.
• Power Electronics.
• Infrastructure.
• Automation -->.
• Power Electronics.
• Automation.
• Infrastructure.
• Mobility.
• Investor Relations -->.
• Investor Relations.
• Financial Information.
• Shareholder's Information.
• Newsroom.
• Publication.
• Stock and Dividend Information -->.
• IR Contact.
• Service Support.
• Downloads.
• UPS Warranty Check.
• Datacenter Configurator -->.
• Virtual Showrooms.
• Authorized Distributors.
• FAQs.
• Sustainability.
• ESG.
• International Initiatives.
• Green Products.
• CSR Commitment.
• Download.
• NEWS & EVENTS.
• Corporate News.
• CSR News.
• Products & Services News.
• Blog & eBook.
• In the News.
• Event Calendar.
• Training.
• Press Contact.
• Careers.
• contact us.

Skills:

Teamwork, Teaching

Job type:

Full-time

• Cognitive Architectures.
• Machine Learning.
• Computer Vision.
• Natural Language Processing.
• Human-centered Design for AI applications.
• Data Science & Data Engineering.
• Cyber security.
• We are interested in applicants who are committed and have a passion for a culturally diverse environment in research and/or teaching, and demonstrate a willingness to nurture a uniquely inclusive environment. By partnering with public & private partners, our researches are focused towards practical AI applications in logistics, retail, agriculture, finance and entertainment technology. We are collaborating with Carnegie Mellon University and leading universities in Thailand in providing top-tier collaborative research and engineering degree programs in Thailand.
• Our core faculty carry a moderate teaching load that allows time for quality research and close involvement with students. We expect you to establish and grow a strong research program, contribute to our teaching mission, and show your passion for mentoring and advising students. We are seeking individuals who have demonstrated commitment to our core values: creativity, quality, innovation, and engineering solutions, all within a diverse and tight-knit community guided by respect and joy of doing.
• Provide a continuing high level of personal commitment to, and achievement in, a particular scholarly area and asa result, generating high level research outcomes.
• Leading research projects and secured supporting resources for research teams.
• Contribute to developing, mentoring and providing feedback to junior researchers.
• Make an effective contribution to teaching and learning in their discipline, modeling teamwork and flexibility to ensure the pedagogical and commercial success of the Faculty and University.
• Contribute to curriculum, resource, program and subject design, development, management and review as required to ensure that learning and teaching in the Faculty and across disciplines reflect best practice and a command of the field.
• Conduct lectures, tutorials, workshops, practical classes, demonstrations, field excursions, clinical sessions and other appropriate learning activities as required.
• Act as a subject coordinator and/or area or discipline coordinator including: managing the area/discipline including providing feedback and contributing to performance management; supervising tutors; carrying out related planning and coordination responsibilities; organizing the preparation and marking of assignments and all examinations; invigilating examinations; and submitting grades.
• Continuously improve their own teaching and learning, including developing a comprehensive teaching portfolio, and contributing to the continuous development and improvement of learning and teaching across the university.
• Ensure that the graduate attributes of the University are embedded in subjects or discipline areas for which they are responsible and that there is explicit relationship between learning and teaching to University objectives.
• Comply with all policies and procedures relating to teaching and learning, making every effort to contribute to the continuous improvement and effectiveness of the administration of teaching and learning.
• Flexible Work Schedule.
• Five-day work per week.
• Group-based health insurance plan.
• Provident Fund.
• Paid Time Off (10 days - annual leave).

Skills:

Quality Assurance

Job type:

Full-time

• Operate tester and handler machines to get the output as standard time.
• Ensures that equipment,materials and areas of operation conform to all appropriate health and safety regulations.
• Continually reviews products quality against specification to minimize rejects.
• Ensures that assigned area of responsibility is maintained with good housekeeping practices.
• Perform real time visual completed units per specification and feedback to supporting groups for improvement.
• Strictly working the company policy,working rules and work instruction procedure.
• Complete record accurately all data in traveler and CAMSTAR.
• Performs other works that assigned by Supervisor.
• Consolidates, summarize all potential problem issues, suggestion and report to Supervisors or upper management.
• Be certified by Trainer and concerned persons.
• For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process.
• Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group.
• Job Req Type: Experienced.
• Required Travel: No.
• Shift Type: 1st Shift/Days.

Job type:

Full-time

• Attending to customer enquiries and booking of shipments.
• Familiarize with Airline agents, Airline Operation and routing will be advantage.
• Arrangement of standard bookings with the airlines and co-loaders.
• Preparation of Airway bill and all document for pre-alerts to all respective stations.
• Create daily export movement report, checking of uplift details for export and also keep all customers informed of the acquired information.
• Follow up with loading team, customs broker, trucking to make sure shipment is arranged as plan.
• Keep monitoring and process for achievement of Airfreight KPI.
• Work with a counterpart at destination and all relevant parties, to achieve company goal.
• Any other duties as assigned by the management.
• About our Benefits.
• A strong Team Spirit and a lot of fun together.
• A safe, multi-cultural and inclusive environment.
• Individual opportunities for growth and development.
• Inclusion and social diversity are firmly anchored values in our corporate culture. Regardless of gender, age, any disabilities, religion, ethnic origin or sexual identity: We are looking forward to meeting you!.
• If you are excited by this fantastic opportunity and have what it takes, then click APPLY!.

Experience:

5 years required

Skills:

Chemical Processing, Petrochemical, Microsoft Office

Job type:

Full-time

• Know all hazards of this job to specifically include characteristics and handling procedures of all chemicals used or produced within confines of area assigned.
• Know chemical process description and physical/field location of all equipment and pipelines of unit(s) assigned.
• Be able to operate and have a working knowledge of the safe operation of a variety of chemical processing equipment.
• Document necessary and accurate data/text in prescribed publication volumes or sheets.
• Maintain a good working report with superiors, subordinates, and peers to include being able to instruct and train new or less experienced employees.
• Be able to take all samples in unit(s) required for normal operation, troubleshooting and customer service in a safe manner and ensure label correctly all containers required by the various processes.
• Maintain clean areas in unit(s) assigned to meet all safety standards and to provide a presentable unit to any visitors.
• Be able to prepare hazardous waste drums as well as non-hazardous waste drums.
• Clean-up and decontaminate after chemical spills.
• Be able to serve as a "point man" during unit shutdowns and startups.
• Perform key functions as a Laboratory Chemical Technician.
• Perform other tasks assigned by direct supervisor/manager.
• What You Offer.
• Diploma in Chemical, Petrochemical, Mechanic or related disciplines.
• 0-5 years of chemical plant experience.
• Must be able to read, write legibly and perform calculations involving addition, subtraction, division, multiplication, fractions, and decimals.
• Must be (1) willing to work independently without constant supervision; (2) constantly alert to detect abnormal conditions of operation and equipment; (3) exercise judgment in acting promptly to correct such conditions. Must be able to function in a self-directed work team environment.
• Personal Computer skill and working knowledge of Microsoft Office software, including Microsoft Excel, and Microsoft Word.
• Have a comprehensive working knowledge of the safe operation of a variety of chemical processing equipment and areas in the plant such as reactors, condensers, measuring tanks, storage tanks, washing tanks, gravity filters, vacuum filters, pressure filters, vacuum pumps, transfer pumps, agitators, stills, fractionating columns, scales, balances, receivers, and all auxiliary equipment necessary for the operation of the foregoing equipment.
• YOUR APPLICATION.
• Are you as curious, courageous and colorful as we are? If so, we can offer you an exciting career opportunity. We look forward to receiving your application including a cover letter, resume/CV, and relevant certificates. Become part of our Team - apply now!.
• Contact Us.
• www.covestro.com.
• Covestro welcomes applications from all individuals, regardless of racial or ethnic origin, skin color, nationality, religion, philosophy, gender, age, physical characteristics, marital status, disability, appearance, sexual orientation and sexual identity. We are committed to treating all applicants fairly and avoiding discrimination.

Skills:

Recruitment

Job type:

Full-time

• Operate boiler, hot oil and associated utility systems safely and reliably in accordance with operating procedures, approved parameters and legal requirements.
• Perform boiler start-up, shutdown, normal operation, standby operation and emergency response in a controlled and disciplined manner.
• Monitor boiler pressure, temperature, water level, burner condition, fuel consumption, combustion condition, feed water quality, hot oil temperature and utility performance.
• Conduct routine field rounds, check sheets, log sheets, first-line inspection and abnormality reporting with accurate records.
• Perform first-line care such as housekeeping, basic cleaning, lubrication support, steam trap observation, leak identification, blowdown support and minor adjustment within authorization.
• Support PM & CM planning by providing equipment condition feedback, maintenance history, operating constraints and required shutdown windows.
• Support PTW execution as area owner / operator interface, including equipment isolation, de-isolation, handover, line walk, job readiness check and PTW electrical verification support where applicable.
• Comply with HSSE rules, process safety requirements, environmental control, Permit to Work system, Lock Out / Tag Out requirements and emergency response procedures.
• Support boiler and hot oil contract holder activities by coordinating service providers, checking job quality, confirming work completion and raising performance or safety concerns.
• Support energy preservation by monitoring energy consumption, steam loss, insulation condition, condensate return, combustion efficiency and opportunities for fuel / electricity saving.
• Support LGAME, Risk & Integrity and asset integrity activities by identifying risks, following inspection requirements and maintaining operating discipline.
• Support critical drawing and as-built control by reporting field changes related to boiler, hot oil, piping, electrical, instrument and pneumatic systems.
• Support TPM, Operator CARE and CI activities to improve equipment ownership, reliability, housekeeping, defect elimination and loss reduction.
• Participate in digital TPM, low-cost automation and plant improvement initiatives where relevant to boiler operation, utilities and maintenance performance.
• Coach and share practical operating knowledge with team members and contractors, supporting a people-centric culture, teamwork and behavior-based process discipline.
• EXPERIENCE / QUALIFICATIONS.
• Technical certificate, diploma or bachelor degree in Mechanical, Electrical, Instrumentation, Industrial or related technical field is preferred.
• Practical experience in boiler, hot oil, utility operation, plant maintenance or production support is preferred.
• Knowledge of boiler safety, steam system, fuel / burner system, water treatment, PTW, LOTO, HSSE and environmental requirements is preferred.
• Able to read and understand operating parameters, basic engineering drawings, check sheets, maintenance records and safety documentation.
• Able to communicate clearly in daily operations, shift handover, contractor coordination and abnormality escalation.
• Experience in TPM, Operator CARE, CI, project support, digital tools or low-cost automation is an advantage.

Skills:

Power point

Job type:

Full-time

• เดินเครื่อง ดูแล เครื่องจักรโรงไฟฟ้า, Boiler (Water tube boiler).
• ตรวจสอบเครื่องจักร และอุปกรณ์ที่ใช้ในการผลิตไฟฟ้า จดบันทึก ค่า parameter ต่าง ๆ และดูแลให้พร้อมใช้งานได้ต่อเนื่อง.
• รายงานสถานการณ์เดินเครื่อง และรายงานอื่นๆที่เกี่ยวข้องกับการผลิต.
• ดูแลทำความสะอาดเครื่องมือ อุปกรณ์ เครื่องจักร และพื้นที่ที่ได้รับมอบหมาย.
• ดูแล ซ่อม บำรุงรักษา เครืองจักร ในเบื้องต้น.
• ตรวจรับเชื้อเพลิง ที่นำมาใช้ในโรงงาน.
• จบการศึกษาระดับ ปวส. ขึ้นไป ในสาขาเครื่องกล, ไฟฟ้า, เทคนิคการผลิต, ช่างอุตสาหกรรม หรือสาขาอื่น ๆ ที่เกี่ยวข้อง.
• มีความรู้เรื่อง Power plant และ Water tube boiler.
• มีความรู้เรื่อง ระบบ Water treatment ในโรงไฟฟ้า.
• มีความรู้เรื่อง Mechanic และไฟฟ้า เบื้องต้น.
• มีทักษะการเดินเครื่องจักร การผลิต การใช้งานควบคุมระบบ PLC และ DCS.
• สามารถใช้โปรแกรมคอมพิวเตอร์เบื้องต้น เช่น Microsoft Word, Excel, PowerPoint ได้.
• หากมีประสบการณ์เดินโรงไฟฟ้า หรือ Water tube boiler จะได้รับพิจารณาเป็นพิเศษ.
• สามารถทำงานเป็นกะ และเดินทางไปต่างจังหวัดได้.

Skills:

Automation

Job type:

Full-time

• Operate CMG machines and contact socket activity to get the output as standard time.
• Ensures that equipments/ materials and areas of operation conform to all appropriate health and safety regulations.
• Continually reviews products quality againt specification to minimize rejects.
• Ensures that assigned area of responsibility is maintained with good house keeping practices.
• Perform real time inspection completed units per specification and immediately feedback to supporting groups for improvement.
• Strictly working as the company policy, working rules and work instruction procedure.
• Complete Record accurately all data in traveller,downtime machine etc, and submit to supervisors when completed working shift.
• Performs other works that assinged by supervisor.
• Consolidates/ summarize all potential problem issues/suggestion and report to Supervisors,upper Management.
• Be certified by Trainer and concerned persons.
• For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process.
• Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group.
• Job Req Type: Graduate Job.
• Required Travel: No.

Experience:

2 years required

Job type:

Full-time

• Safety working conditions and environmental.
• Quality of product conforming with Continental standards.
• Preparing tooling to support production demand.
• Comply with safety regulations to perform any operation.
• Report to shift leader.
• Education.
• Background: High vocational with or any related field.
• Work experience: 0 - 2 years of experience in production and manufacturing process.
• Free lunch, uniform and company transportation.
• Housing allowance.
• Performance bonus.
• Provident fund.
• Family health care program.
• Group insurance (medical, dental).
• Good health and wellness program (e.g., sport clubs, fitness).
• พร้อมที่จะขับเคลื่อนกับคอนติเนนทอลแล้วหรือยัง? เริ่มต้นด้วยการกรอกใบสมัครออนไลน์ได้เลย!.

Experience:

2 years required

Skills:

Teamwork

Job type:

Full-time

• Visual inspection for component part and finish goods part following quality standard requirement(PQI,Q-alert) for VHP/VNP model.
• On time visual inspection for FG packing follow cycle time standard for all model.
• Correct label printing and labeling of boxes, KANBAN scanning / Check quantity, labelling and part number.
• 100% visual inspection laser mark(VHP/VNP) and prepare finish goods 10 digit.
• Correct perform change over following PQI and change over check sheet for VHP/VNP.
• Operation an assigned task e.g. sorting quality issue, Re-check quality in assembly process.
• Daily routine assigned, Machine check sheet, Machine cleaning, Weight scale set up, 5S shop floor.
• Other tasks as supervisor assigned.
• Secondary school or higher educational.
• At least 1 - 2 years of working experience in production area.
• Good teamwork and co-operation.
• Able to use magnifier for visual inspection.
• Entrepreneurial mindset.
• Quality mindset.
• Able to working in night-shift.
• Your future job offers you.
• Housing allowance, company shuttle, free lunch, provident fund, medical benefits, OPD, IPD, dental benefits, performance bonus, service year reward, insurance, diligent allowance, marriage allowance, new born gift, oversea allowance, etc.
• Make it happen.
• Send us your application by using the I'm interested button!.
• Interested applicants are invited to submit your CV, current & expected salary, and contact information.

Experience:

2 years required

Skills:

Teamwork, English

Job type:

Full-time

• Support filling, put bag granulate to central granulate.
• Check moisture granulate.
• Check material for machine to run machine smoothly and correctly.
• Update and follow up WIP molding area.
• Support setter for up mold and down mold.
• Confirm machine, equipment and cleaning before start work.
• Control and follow Kanban system and follow up return Kanban from Assembly.
• Check quantity, labelling, and part number model.
• Control stock for plastic part and quantity in SAP system.
• Work following to BPS standard including KANBAN, 5S, 14Q and etc.
• Work under company regulation and department work standard.
• Secondary school, higher vocational or above.
• At least 1-2 years of work experience in production operator or manufacturing automatic industry.
• Fair communication skills in English, both in reading and writing or other language is advantage.
• Good teamwork and Co-operation.
• Able to use magnifier for visual inspection.
• Entrepreneurial mindset, Accountability mindset and Quality mindset.
• Able to working in night-shift.
• Your future job offers you.
• Housing allowance, company shuttle, free lunch, provident fund, medical benefits, OPD, IPD, dental benefits, performance bonus, service year reward, insurance, diligent allowance, marriage allowance, new born gift, oversea allowance, etc.
• Make it happen.
• Send us your application by using the I'm interested button!.
• Interested applicants are invited to submit your CV, current & expected salary, and contact information.

Skills:

Assembly, English

Job type:

Full-time

• Perform production, inspection, and part checking activities in accordance with PQI standards.
• Comply with company regulations and departmental work instructions at all times.
• Verify machine condition, equipment readiness, and cleanliness prior to starting work.
• Maintain cleanliness and implement 5S practices within the assigned work area.
• Provide suggestions and participate in continuous improvement of production processes.
• Operate processes using Poka-Yoke systems to ensure defect-free quality.
• Print labels and perform accurate labeling of boxes and products.
• Conduct Kanban scanning and support Kanban leveling activities.
• Check quantities, labeling accuracy, and part numbers/models (similar to dock audit requirements).
• Perform other duties as assigned by the team leader.
• Education.
• Secondary School graduate or higher.
• Able to understand and use basic English for work instructions.
• Able to do visual inspection, simple assembly, and basic machine changeover.
• Able to follow quality and quantity requirements of production.
• Willing to follow company rules, production procedures, and safety regulations.
• Able to keep 5S and cleanliness in the working area.
• Able to work well with team members.
• Able to follow instructions from team leader or supervisor.
• Your future job offers you.
• Housing allowance, company shuttle, free lunch, provident fund, medical benefits, OPD, IPD, dental benefits, performance bonus, service year reward, insurance, diligent allowance, marriage allowance, new born gift, oversea allowance, etc.
• Make it happen.
• Send us your application by using the I'm interested button!.
• Interested applicants are invited to submit your CV, current & expected salary, and contact information.

Job type:

Full-time

• Free lunch, uniform and company transportation.
• Housing allowance.
• Performance bonus.
• Provident fund.
• Family health care program.
• Group insurance (medical, dental).
• Good health and wellness program (e.g., sport clubs, fitness).
• พร้อมที่จะขับเคลื่อนกับคอนติเนนทอลแล้วหรือยัง? เริ่มต้นด้วยการกรอกใบสมัครออนไลน์ได้เลย!.

Experience:

2 years required

Job type:

Full-time

• Follow the internal ESH work instructions in the daily work.
• Demonstrate exemplary personal behavior in ESH and motivate others.
• Ensure immediate notification and response, and initiate preventive measures in case of unsafe or polluting hazards.
• Visual inspection tires which meet the quality standard.
• Skillfully operate in Visual inspection area to have the output which meet production plan per each shift.
• Utilize given resources worthily.
• Cooperate with HR and superiors to obtain any training or skill development.
• Operate Visual inspection machine according to production requirements to avoid unqualified products.
• Upon finding any operation behavior against production operation specifications, immediately stop it and report to shift leader.
• Carry out corrections for production process to meet operation specifications.
• Upon finding equipment failure, immediately report to shift leader for speed recovery to ensure normal operation of equipment.
• Comply with relative safety regulations of the company.
• Carry out various work according to requirements of quality standards in company.
• Complete various work stipulated in TPM to enhance productivity.
• Carry relative stipulations of 5S. Keep working field in line with requirements of 5S.
• Carry out various work according to environmental production standards in the company and perform all requirements in environment management system.
• High vocational certificate with or any related field.
• 0 - 2 years of experience in production and manufacturing.
• 0 - 2 years of experience in tire manufacturing or related field is advantage.
• พร้อมที่จะขับเคลื่อนกับคอนติเนนทอลแล้วหรือยัง? เริ่มต้นด้วยการกรอกใบสมัครออนไลน์ได้เลย!.

Skills:

Production planning

Job type:

Full-time

• Free lunch, uniform and company transportation.
• Housing allowance.
• Performance bonus.
• Provident fund.
• Family health care program.
• Group insurance (medical, dental).
• Good health and wellness program (e.g., sport clubs, fitness).
• พร้อมที่จะขับเคลื่อนกับคอนติเนนทอลแล้วหรือยัง? เริ่มต้นด้วยการกรอกใบสมัครออนไลน์ได้เลย!.

Experience:

2 years required

Job type:

Full-time

• Be proficient operating machines in Tire Building production area.
• Maintain and improve quality of Carcass and Green Tires produced by Tire Building production area.
• Comply safety regulation to perform any operation.
• Report to Tire Building Shift Leader.
• Follow the internal ESH work instructions in the daily work.
• Demonstrate exemplary personal behavior in ESH and motivate others.
• Ensure immediate notification and response, and initiate preventive measures in case of unsafe or polluting hazards.
• Skillfully operate machines in Tire Building in production area to have the output which meet production plan per each shift.
• Arrange carrier,e.g.cassette,to handle stock of output.
• Produce Carcass and Green Tires which meet the quality standard.
• Understand types of defect realize to avoid making mistake which cause the defect.
• Produce Carcass and Green Tires which meet the quality standard.
• Understand types of defect realize to avoid making mistake which cause the defect.
• Cooperate with HR and superiors to obtain any training skill development.
• High vocational certificate with or any related field.
• 0-2 years of experience in production and manufacturing management.
• 0-2 years of experience in tire manufacturing or related field.
• Ready to drive with Continental? Take the first step and fill in the online application.

Skills:

Production planning

Job type:

Full-time

• Free lunch, uniform and company transportation.
• Housing allowance.
• Performance bonus.
• Provident fund.
• Family health care program.
• Group insurance (medical, dental).
• Good health and wellness program (e.g., sport clubs, fitness).
• พร้อมที่จะขับเคลื่อนกับคอนติเนนทอลแล้วหรือยัง? เริ่มต้นด้วยการกรอกใบสมัครออนไลน์ได้เลย!.

Skills:

Production planning

Job type:

Full-time

• Free lunch, uniform and company transportation.
• Housing allowance.
• Performance bonus.
• Provident fund.
• Family health care program.
• Group insurance (medical, dental).
• Good health and wellness program (e.g., sport clubs, fitness).
• พร้อมที่จะขับเคลื่อนกับคอนติเนนทอลแล้วหรือยัง? เริ่มต้นด้วยการกรอกใบสมัครออนไลน์ได้เลย!.