Filter Jobs

Skills:

Electronics, Automation

Job type:

Full-time

The company, founded in 1988, is one of the leading producers in the world for power and thermal management solutions. Delta is also a major regional player in several product segments including industrial automation, displays, and networking. As an energy-saving solutions provider with core competencies in power electronics and innovative research and development, Delta's business categories include Power Electronics, Automation, and Infrastructure.

Experience:

5 years required

Skills:

Mechanical Engineering, Petrochemical, Procurement, Teamwork, English

Job type:

Full-time

• Perform engineering design, engineering studies, and detailed engineering for rotating equipment.
• Prepare and review engineering documents, including datasheets, design calculations, performance curves, ITPs, drawings, piping schematics, testing reports, and technical reports.
• Evaluate rotating equipment and material specifications in accordance with project requirements.
• Participate in technical clarification, technical bid evaluation, and vendor document review.
• Prepare Material Take-Off (MTO) and support procurement activities.
• Support FAT, SAT, pre-commissioning, commissioning, and construction activities.
• Prepare construction scope of work and provide engineering support throughout project execution.
• Bachelor's Degree in Mechanical Engineering or a related field.
• Mechanical Engineer: Minimum 5 years of experience in the Oil & Gas or Petrochemical industry.
• Senior Mechanical Engineer: Minimum 10 years of experience in the Oil & Gas or Petrochemical industry.
• Experience in at least 3 Brownfield Modification Projects.
• Centrifugal Pumps.
• Centrifugal Compressors.
• Reciprocating Compressors.
• Screw Compressors.
• Positive Displacement Pumps.
• Air Compressors & Dryers.
• Fans.
• Agitators.
• Mechanical Seals & Bearings.
• Familiar with international standards such as API, ASME, ANSI, and ISO (e.g. API 610, API 617, API 618, API 674, API 675, API 676, API 682, API 692, ASME B73.1, ISO 1940-1).
• Knowledge of lateral & torsional analysis, spare parts selection, and construction procedures (WPS/PQR/WPQ, NDE, Weld & NDT Map, Fabrication Procedure).
• Experience in FAT, SAT, Pre-commissioning, and Commissioning.
• Construction or offshore project experience is an advantage.
• Familiarity with hazardous area classification is preferred.
• Preferred Skills.
• Strong analytical and problem-solving skills.
• Good communication and teamwork.
• Ability to work independently and under pressure.
• Good command of English.

Experience:

3 years required

Skills:

Mechanical Engineering, Teamwork, AutoCAD, English

Job type:

Full-time

• Co-ordinate with other engineers, subcontactor and customer.
• Participant in project planing meeting.
• Responsible of planing and preparing shop drawing, data installation, and project schedule. Also communicate with sub subcontractor.
• Controlling a installation work to meet relevant regulations and standards.
• Support customer after handover.
• Bachelor's Degree in Mechanical Engineering.
• At least 3 - 5 years experience in Mechanical Engineering.
• Good commands of English (writing, speaking, listening and reading).
• Good computer skills and a familiarity with Microsoft Windows / AUTOCAD and other.
• Good Leadership, Management skill, Teamwork ability and Self-motivated work ethic and able to perform other Duties as assigned.
• Able to relocate to work at other Province as Head office, Branch Office and Site Office. (Rayong or other).
• Preferable Skills / Experiences.
• Knowledgeable of HVAC System / Plumbing System / Fire Protection System/ Mechanical utility work.
• Experience in Site Engineer for construction industry field.
• Associate Engineer License.
• Allowance.
• Social Insurance / Group Health Insurance.
• Bonus depends on corporate profit and individual achievement.
• Uniform.
• Provident Fund (After probation 1 year).
• Dental care (terms are as specified by the company).
• Annual Health check up.

Experience:

5 years required

Skills:

Mechanical Engineering, ISO 14001, ISO 9001, English, Thai

Job type:

Full-time

• This dual-role position begins as a Site.
• Mechanical Engineer.
• during the construction and commissioning phase of the industrial waste-to-energy plant.
• After COD, the position transitions into O&M, responsible for leading the mechanical maintenance team to ensure the reliability, safety, and performance of all mechanical systems in day-to-day operations.
• Job Responsibilities.
• Monitor the EPC contractor's mechanical installation works (boilers, turbines, conveyors, pumps, etc.) for conformance to design and quality standards.
• Conduct daily site inspections to verify safety compliance and work progress.
• Coordinate with the owner's engineering, QA/QC, and HSE teams to manage issues arising at site.
• Participate in mechanical testing, commissioning, punch list inspections, and system handover processes.
• Support documentation review such as O&M manuals, test reports, and equipment data sheets for handover readiness.
• Attend site coordination meetings and report progress/issues to the Site Manager.
• Supervise mechanical personnel in the safe and timely execution of their duties on a day to day basis.
• Supervise mechanical repair and troubleshooting and assist in the training of the mechanical personnel.
• Set up preventive/predictive maintenance program and prepare all necessaries spaceports and consumable materials for mechanical repair.
• Improve technical information of mechanical equipment in maintenance database system.
• Maintain journals, logs, maintenance and equipment records and various reports.
• Provide general direction, control and evaluate to subordinate classifications.
• Initiate purchase requisition for any maintenance parts required and submit for approval.
• Job Qualifications.
• Bachelor's degree in Mechanical Engineering or related field.
• Minimum 5 years.
• of experience in mechanical work in power plant, energy, or large-scale industrial settings.
• Experience in both construction supervision and plant O&M is strongly preferred.
• Must know and actively support quality, environmental, safety, and social management systems (e.g., ISO 14001, ISO 9001, ISO 45001, and ESMS).
• Familiarity with mechanical systems in WtE (waste-to-energy), thermal power plants, or heavy industrial facilities.
• Sound knowledge of preventive maintenance planning, condition monitoring, and mechanical failure analysis.
• Strong leadership, communication, and team coordination skills.
• Able to work full-time on-site and adapt to changing project/operation conditions.
• Proficiency in Thai; basic English for technical documents and reporting is a plus.
• Fluent in English both written and verbal (Minimum 600 TOEIC score).
• Goal-Oriented, Unity, Learning, Flexible.

Experience:

1 year required

Skills:

Mechanical Engineering, Petrochemical, Procurement, English

Job type:

Full-time

• Provide advice to Engineering teams to determine feasibility, process/ design advantage, cost & time constraint and other technical or economic factors which may affect the project's medium-term to long-term production process. Identify the problem areas and suggest the appropriated solutions/actions to Engineering team as necessary.
• Compile relevant necessary data/ information to conduct analytical studies on specification and performance requirements considering medium-term and long-term solutions.
• Provide advice/ recommendation on procurement strategies and participate in the procurement processes to obtain the most appropriated vendors for equipment, materials and services. Review bidder lists, pre-qualification, detailed contractor's overall plans and provide recommendation to project teams. Participate in the bid evaluation and contractor's selection.
• Recommend corrective actions when the project performance deviates from the project direction/requirements.
• Study, analyze and recommend modification/ construction options and solutions to the process that will enhance / optimize production at minimum costs and with proper safety considerations. Determine effect of such modification/ construction on the process and report feasibility of such modification/ construction.
• When/ as required, participate in the technical committee meeting with internal and external parties to provide advice/ recommendation in own expertise.
• When/ as required, participate in Vendor's manufacturer/fabrication shop inspection, field pre-commissioning, commissioning, test run and start up of mechanical equipment.
• Promotes and ensures an affective implementation of SSHE rules and engineering best practices.
• Coach, motivate, and develop junior professionals and share knowledge to team.
• Job End Result.
• Accuracy, reliability and timeliness of advice, guidance and/ or recommendations provided to Engineering teams when required.
• Efficiency and reliability of recommendations on modification/ construction options and solutions to mechanical equipments with regards to quality and cost effectiveness to enhance / optimize production at minimum costs and with proper safety considerations.
• Contribute to obtain the most appropriate contractors to carry out engineering modification/ construction works.
• Safe and efficient operation through careful follow-up of activities. Prompt actions in emergency situations.
• To ensure the engineering knowledge transfers to junior professionals.
• Professional Knowledge & Experience.
• Bachelor's degree, or equivalent, in Mechanical Engineering.
• At least 15 years' experience in design and construction of large construction projects.
• At least 12 years in upstream or midstream or downstream in oil and gas industry or petrochemical industry or power plant.
• Good command of written and spoken English.
• Knowledge of both green and brown fields in engineering and topside facility designs of the stationary mechanical systems and rotating machines, topside equipment, piping and support structures, corrosion/erosion, welding, QA/QC, construction codes & standards, offshore hook-up/commissioning and modification work.
• Strong technical knowledge and field experiences in Factory Acceptance Test (FAT), pre-commissioning, commissioning, test run and start up of mechanical equipment is a plus qualification.
• Good computer skills.
• Good interpersonal and communication skills.
• Work Location.
• Bangkok.

Experience:

8 years required

Skills:

Mechanical Engineering, Cloud Computing, Web Services, Automation

Job type:

Full-time

• Perform design and equipment submittal review for new Data Centers in your region.
• Troubleshoot, conduct Root Cause Analysis (RCA) and create Corrective Action (CA) documentation for site/equipment failures.
• Directly support operational issues with ad-hoc training, complex operating procedure reviews, including critical equipment, and event support.
• Own the design for existing data center upgrades and design-solutions, which add capacity, improve availability, and increase efficiency.
• Interface with internal data center design engineering team, server hardware team, environmental health and safety team to promote standards that maintain consistency and reliability in services delivered.
• Work on concurrent projects, sometimes in multiple geographical regions.
• Initiate and lead engineering audits including on-site visits within Amazon's owned or colo data centers. Produce reports outlining risks with recommended mitigations and remediation's.
• Act as resident engineer during new construction projects. Support construction, commissioning, and turnover.
• About AWS.
• Diverse Experiences.
• Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying.
• Why AWS.
• Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.
• Work/Life Balance.
• We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve.
• Inclusive Team Culture.
• AWS values curiosity and connection. Our employee-led and company-sponsored affinity groups promote inclusion and empower our people to take pride in what makes us unique. Our inclusion events foster stronger, more collaborative teams. Our continual innovation is fueled by the bold ideas, fresh perspectives, and passionate voices our teams bring to everything we do.
• Mentorship and Career Growth.
• We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.
• Bachelor's degree in mechanical engineering or demonstrable equivalent professional experience.
• Minimum 8 years of relevant experience working in mission-critical facilities such as data centers, power generation plants, OEM vendors (Original Equipment manufacturers) or oil/gas facilities.
• Knowledge of Mechanical systems and design principles for data centers, including: the candidate would have deep and detailed knowledge of the Equipment having worked in a related Company/handled specifically these systems (Eg Chillers, AHUs, Piping, Valves, Air quality, Fuel Systems, Automation (BMS) etc).
• Strong written and verbal communication abilities, meticulous attention to detail, and commitment to maintaining high-quality work standards.

Experience:

6 years required

Skills:

Product Development, Financial Reporting, Project Management, Industrial Design, Problem Solving, Negotiation, Accounting, SAP

Job type:

Full-time

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Functional Area: Engineering.
• Career Stream: Design Engineering Mechanical.
• SAP Short Name: SLE-ENG-DME.
• Job Level: Level 09.
• IC/MGR: Individual Contributor.
• Direct/Indirect Indicator: Indirect.
• Summary.
• The Senior Lead Engineer, Mechanical Design develops new mechanical systems/modules and maintains existing designs. Research mechanical concepts and create system solutions using 3D modeling and simulation software. Complete calculations and test, validate, and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing process of the mechanical system that they have designed.
• The Senior Lead Engineer, Mechanical Design works with cross functional teams of other engineers, customers, supply chain and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.
• Detailed Description.
• Lead the design, development and implementation of technical solutions in multiple domains. Participate in project planning and scheduling.
• Provide technical leadership and direction to a team of engineers. May be a recognised expert (go to person) in one or more technical areas.
• Review, interpret and may negotiate customer requirements/specifications and provide customer feedback.
• Lead the deployment of strategic programs and coordinate site-wide deployment efforts.
• Proactively promote industry best practices.
• May manage relationships with key vendors/partners.
• Prepare calculations on the proposed solution before completing technical drawings.
• Create designs in line with company procedure, regulations and client standards.
• Submit drawings to management, engineering teams and customers for review.
• Use customer feedback and data to upgrade, improve or repair the company's existing machines.
• Provide support during the manufacturing process.
• Finalize designs and send prints to the production department.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage/lead complex, multiple line engineering projects that may also involve other functions. Demonstrate solid understanding of the technical, financial and people aspects of the project. Able to create a project/change management plan and ensure that the project is delivered within the assigned time and budget. Ability to recognize project barriers and develop mitigation plans.
• Leadership - Demonstrate "People & Team Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning - Ability to create financial plans for your projects, align them internally with your line of management and other functions and externally if needed. Create project plans, profitability calculations, risk and sensitivity analysis, able to recognize barriers and mitigate profitability risks. Fully knowledgeable about internal and external financial reporting, accounting and tax requirements relevant to your area of expertise.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• This is also requirement for manager level. I capture from Global job description.

Experience:

7 years required

Skills:

Mechanical Engineering, English

Job type:

Full-time

• Bachelor's degree in mechanical engineering.
• 7 years of experience in Power Plant is a plus.
• Professional engineering license from the Council of Engineers is a plus.
• Understand basic overall process of Power plants.
• Excellent knowledge in rotating machines such as Fans, Pumps, Compressors, and Gas Turbines with fluent application of the international industrial codes and standards such as API and ASME.
• Experience in cryogenic plants design and/or operation and maintenance is a plus.
• Excellent communication, coordination, and problem-solving skills.
• Experience with the development of green fields in the Oil and Gas business.
• Experience in rotating machines technical specification evaluation specific to Oil and Gas sector.
• Display the high performance with board guidelines with minimal supervision.
• Able to work under pressure and tight timeline.
• Able to travel both domestically and upcountry.
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/work upcountry and abroad.
• Goal-Oriented, Unity, Learning, Flexible.

Experience:

4 years required

Skills:

Mechanical Engineering, English

Job type:

Full-time

• Supervise mechanical installation, manage contractors, ensure compliance, review documents, monitor progress, enforce QAQC, support commissioning, resolve issues, coordinate teams, safety.
• Job Responsibilities.
• Supervise on-site construction and installation of mechanical systems (HVAC, chiller plant, cooling tower, pumps, piping).
• Manage mechanical works during Data Center construction, ensuring compliance with design drawings and specifications.
• Coordinate with EPC contractors, subcontractors, and vendors for daily site activities.
• Review and validate shop drawings, method statements, and material submittals (mechanical scope).
• Monitor site progress, installation quality, and construction schedule.
• Conduct inspection and QA/QC checks for mechanical works.
• Support pre-commissioning and commissioning activities (pressure test, flushing, balancing, FAT/SAT).
• Identify and resolve construction and installation issues on-site.
• Coordinate with electrical and civil teams for integration of cooling systems.
• Ensure compliance with site safety (HSE) and construction standards.
• Job Qualifications.
• Bachelor's degree in Mechanical Engineering.
• Minimum 4 - 7 year experiences in site mechanical / MEP / HVAC works.
• Experience in Data Center, industrial plant, or critical facilities preferred.
• Fluent in English, both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/ work upcountry and abroad.
• Goal-Oriented, Unity, Learning, Flexible.

Experience:

3 years required

Skills:

Product Development, Industrial Design, Data Entry, Sketch, SAP

Job type:

Full-time

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Functional Area: Engineering.
• Career Stream: Design Engineering Mechanical.
• SAP Short Name: ENG-ENG-DME.
• Job Level: Level 07.
• IC/MGR: Individual Contributor.
• Direct/Indirect Indicator: Indirect.
• Summary.
• The Engineer, Mechanical Design develops new mechanical systems/modules and maintains existing designs. Research mechanical concepts and create system solutions using 3D modeling and simulation software. Complete calculations and test, validate, and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing process of the mechanical system that they have designed.
• The Engineer, Mechanical Design works with cross functional teams of other engineers, customers, supply chain and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.
• Detailed Description.
• Work independently to design and develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
• Attend and interact in technical customer meetings.
• Prepare calculations on the proposed solution before completing technical drawings.
• Design, modify and implement systems that meet customer and Celestica needs. E.g. Sketch and draw up designs using input from other engineers, requirements and input from design review (DFx) team.
• Create designs in line with company procedure, regulations and client standards.
• Submit drawings to management, engineering teams and customers for review.
• Use customer feedback and data to upgrade, improve or repair the company's existing machines.
• Provide support during the manufacturing process.
• Finalize designs and send prints to the production department.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Experience:

5 years required

Skills:

Mechanical Engineering, Thai

Job type:

Full-time

• We believe that leaving a mark is a true challenge and opportunity for every one of us.
• We believe that leaving a mark is a sign of trust and impact.
• We believe that leaving a mark is a bond with the future.
• We believe that leaving a mark is proof of growth and development.
• Being part of the BV family, is more than just working, it's being convinced that you will leave your mark. in shaping a world of Trust.
• Join an inclusive, flexible and diverse company where you can thrive while contributing to positively transforming the world, we live in.
• Project: Hyperscale Data Center.
• Location: Bangkok, Thailand.
• Contract Duration: 20 months.
• We are seeking a qualified and proactive Mechanical Engineer to support the design review, construction supervision, and commissioning of mechanical systems for a large-scale hyperscale data center project in Thailand.
• The Mechanical Engineer will be responsible for ensuring that all mechanical systems, particularly cooling and HVAC systems critical to data center operations, are delivered in accordance with project specifications, quality standards, and performance requirements. The role will work closely with the Project Manager, discipline engineers, and contractors to ensure seamless coordination and technical excellence.
• Review and validate mechanical system designs, drawings, and specifications (HVAC, chilled water systems, piping, ventilation, etc.).
• Monitor and supervise mechanical works on-site, ensuring compliance with approved designs and construction standards.
• Review and comment on contractor submittals, including shop drawings, material submissions, and method statements.
• Ensure compliance with project specifications, international standards, and local regulatory requirements.
• Conduct regular site inspections to verify quality of installation, workmanship, and progress.
• Coordinate closely with electrical, CSA, and ELV teams to ensure proper system integration.
• Support and oversee testing and commissioning activities, including pre-functional and functional testing.
• Identify and manage non-conformance reports (NCRs) and ensure corrective actions are properly implemented.
• Monitor project progress against schedule and highlight risks, delays, and technical challenges.
• Participate in technical and coordination meetings, providing input on mechanical systems and interfaces.
• Assist in snagging, de-snagging, and final inspections prior to project handover.
• Maintain accurate technical documentation, reports, and records in line with project requirements.
• Ensure compliance with HSE standards and promote safe working practices on site.
• Minimum 5 years of experience in mechanical engineering within construction or MEP projects.
• Proven experience in large-scale projects, preferably data centers, mission-critical facilities, or industrial developments.
• Strong expertise in data center cooling systems (e.g., chillers, CRAH/CRAC, cooling towers, chilled water distribution).
• Good understanding of HVAC design, installation practices, and system integration.
• Experience in site supervision, QA/QC processes, and contractor coordination.
• Familiarity with testing and commissioning processes for mechanical systems.
• Experience working in fast-track, high-specification projects with strict quality standards.
• Knowledge of local Thai regulations and codes is an advantage.
• Our people are ambitious and humble, believing in what they do and convinced that our purpose is shaping a world of trust. With responsibility and openness, they daily serve our 400.000 clients in 140 countries, to bettering society. Across all our businesses and countries, each one of our people leaves their mark in shaping society.
• We believe that leaving a mark is a true challenge and opportunity for every one of us.
• We believe that leaving a mark is a sign of trust and impact.
• We believe that leaving a mark is a bond with the future.
• We believe that leaving a mark is proof of growth and development.
• Being part of the BV family, is more than just working, it's being convinced that you will leave your mark. in shaping a world of Trust.
• Join an inclusive, flexible and diverse company where you can thrive while contributing to positively transforming the world, we live in.

Skills:

Power point

Job type:

Full-time

• ศึกษาและทำความเข้าใจรายละเอียดสัญญาจ้าง แบบก่อสร้าง วัสดุอุปกรณ์ และข้อกำหนดด้านเทคนิคของโครงการ.
• จัดทำ วางแผน และติดตามความก้าวหน้าของโครงการ พร้อมรายงานผลต่อผู้บังคับบัญชา.
• จัดทำและควบคุมเอกสารที่เกี่ยวข้องกับการดำเนินโครงการ เพื่อให้สามารถส่งมอบงานได้ตามเป้าหมายและกำหนดเวลา.
• ประสานและปรับแผนงานโครงการให้สอดคล้องกับแผนงานหลักของลูกค้า รวมถึงประสานงานกับหน่วยงานภายใน ผู้รับเหมา และ Vendor เพื่อให้การดำเนินงานเป็นไปอย่างราบรื่น.
• ควบคุมคุณภาพของงาน เอกสาร วัสดุอุปกรณ์ และงานก่อสร้างให้เป็นไปตามมาตรฐานที่กำหนด.
• สนับสนุนงานทดสอบและส่งมอบระบบ (Testing & Commissioning) พร้อมจัดทำเอกสารที่เกี่ยวข้อง เช่น Testing Report, Commissioning Report, Document Transmittal (DT) และ As-built Drawing.
• ปฏิบัติงานอื่น ๆ ตามที่ได้รับมอบหมายจากผู้บังคับบัญชา.
• ปริญญาตรีสาขาวิศวกรรมไฟฟ้า วิศวกรรมเครื่องกล หรือสาขาที่เกี่ยวข้อง.
• มีทักษะการประสานงานกับผู้รับเหมา วิศวกรโครงการ และลูกค้า.
• สามารถใช้งานโปรแกรม MS Office (Word, Excel, Power Point) ได้เป็นอย่างดี.
• สามารถทำงานภายใต้สภาวะกดดันได้เป็นอย่างดี, แก้ปัญหาเฉพาะหน้าได้.
• หากมีใบอนุญาตประกอบวิชาชีพวิศวกรรมภาคีวิศวกร หรือ สามัญวิศวกร ( กว.) จะได้รับการพิจารณาเป็นพิเศษ.

Experience:

5 years required

Skills:

Mechanical Engineering

Job type:

Full-time

• The Inspection Engineer is responsible for performing third-party inspection, testing, and certification activities for lifting equipment and cranes, primarily within the oil and gas sector, ensuring compliance with applicable international standards, client specifications, and local regulatory requirements.
• Conduct inspection, testing, and certification of.
• Mobile cranes, offshore cranes, tower cranes.
• Lifting appliances, lifting gears, and accessories.
• Initial inspection.
• Periodic and annual inspections.
• Load testing and re-certification.
• Review engineering drawings, lifting plans, technical documents, and manufacturer data books (MDB).
• Applicable international standards (ISO, EN, ASME, API, etc.).
• Client specifications and project requirements.
• Bureau Veritas internal procedures and codes.
• Prepare accurate.
• inspection reports, certificates, and non-conformance reports (NCRs).
• in a timely manner.
• Liaise with clients, contractors, and site personnel to clarify technical issues and inspection findings.
• Identify unsafe conditions and recommend corrective actions to ensure personnel safety and asset integrity.
• Maintain professional conduct and uphold Bureau Veritas values, ethics, and impartiality at all times.
• Support audits, client meetings, and technical discussions when required.
• Education.
• Bachelor's degree in.
• Mechanical Engineering.
• or equivalent engineering discipline.
• Professional Certification.
• Mechanical Engineer License - Level 2.
• (mandatory).
• Experience.
• Minimum.
• 5 years of working experience in the Oil & Gas industry.
• At least.
• 5 years of hands-on experience in inspection.
• Lifting equipment.
• Cranes and lifting accessories.
• Prior experience working with third-party inspection agencies is an advantage.
• Technical Competencies.
• Strong knowledge of lifting equipment safety standards and regulations.
• Ability to interpret engineering drawings and technical documentation.
• Familiarity with inspection and testing techniques for cranes and lifting equipment.
• Good understanding of risk assessment and safe working practices.
• Skills & Attributes.
• Strong attention to detail and analytical skills.
• Excellent written and verbal communication skills.
• Ability to work independently and under minimal supervision.
• Willingness to travel to site locations and work in offshore/onshore environments.
• Proficient in MS Office and inspection reporting systems.
• Health, Safety & Environment (HSE).
• Committed to maintaining a high level of HSE awareness.
• Strict adherence to safety rules, procedures, and permit-to-work systems.

Experience:

6 years required

Skills:

Electrical Engineering, Mechanical Engineering, Analytical Thinking, Project Management, Problem Solving, Automation, English

Job type:

Full-time

• Bachelor's or Master's Degree in Automation Engineering, Mechatronics Engineering, Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum 6-8 years of experience in automation engineering, machine design, equipment development, or industrial automation.
• Proven experience leading and managing engineering teams.
• Strong technical expertise in both hardware and software aspects of automation equipment and machine development.
• Demonstrated experience in complex engineering projects from concept through implementation.
• Strong project management and cross-functional coordination capabilities.
• Excellent analytical thinking, problem-solving, and decision-making skills.
• Strong communication, presentation, and stakeholder management skills.
• Proficiency in English for business and technical communication.
• Preferred Qualifications.
• Experience within a multinational manufacturing or industrial equipment environment.
• Exposure to advanced automation technologies, robotics, Industry 4.0, or smart manufacturing solutions.
• Experience working in global or regional engineering organizations.
• Key Competencies.
• Leadership & People Development.
• Strategic Thinking.
• Innovation & Technology Adoption.
• Project Management.
• Engineering Excellence.
• Stakeholder Management.
• Problem Solving & Decision Making.
• Continuous Improvement Mindset.
• Why Join EssilorLuxottica?.
• At EssilorLuxottica, you are not defined by your job title. We offer a dynamic and collaborative environment where innovation, diversity, and personal growth are encouraged.
• Work on cutting-edge automation technologies and global engineering projects.
• Collaborate with international teams and technical experts.
• Access continuous learning and development opportunities through our Leonardo learning platform.
• Accelerate your career within a global leader in the eyewear and eyecare industry.
• Contribute to meaningful innovations that improve the way people see and experience the world.
• Ideal Candidate Profile.
• We are looking for a hands-on automation leader who combines strong technical expertise with people leadership skills. The successful candidate will be capable of driving engineering innovation, leading high-performing teams, and delivering complex automation projects in a fast-paced global environment.
• Automation Engineering Manager.
• Engineering Manager (Automation/Equipment).
• Mechatronics Engineering Manager.
• Machine Design Manager.
• Industrial Automation Manager.
• R&D Equipment Development Manager.
• Robotics & Automation Engineering Lead.

Experience:

3 years required

Skills:

Mechanical Engineering, Project Management, Procurement

Job type:

Full-time

• DayOne is a global leader in the development and operation of high-performance data centers. As one of the fastest-growing companies in the industry, we've built a robust presence across Asia and Europe and we're just getting started.
• As we expand into new international markets, we're looking for talented, driven individuals to join us on this exciting journey. This is more than a job it's an opportunity to be a key contributor to our dynamic team and help shape the future of global data infrastructure.
• If you're passionate about innovation, technology, and growth, we invite you to be part of DayOne's next chapter.
• Support the Testing & Commissioning Manager to develop and implement effective testing and commissioning strategies.
• Coordinate closely with the SE Asia Testing & Commissioning Director to align regional strategies with local execution.
• Directly manage the testing and commissioning process for all data centre projects.
• Collaborate with project managers, construction teams, and clients to ensure project timelines and budgets are adhered to.
• Conduct regular site visits during construction stages to monitor progress, quality, and compliance with industry standards.
• To be full time on site during all testing and commissioning process.
• Ensure adherence of testing and commissioning protocols and compliance with industry standards, safety regulations, and client requirements.
• Review and approve test plans, reports, and commissioning documentation.
• Serve as the primary point of contact for clients during the testing and commissioning phase.
• Resolve any complex technical issues that arise, ensuring client satisfaction.
• Bachelor's degree in Mechanical Engineering, or a related field. A Master's degree is preferred.
• Minimum of 3-5 years of experience in data centre testing, commissioning, and operations.
• Good knowledge of data centre infrastructure, including HVAC, power systems, and network operations.
• Proficiency in relevant software and tools used in the testing and commissioning process.
• Excellent project management skills, capable of managing multiple projects simultaneously.
• Exceptional communication and interpersonal skills, with the ability to interact effectively with clients, stakeholders, and team members.
• Relevant certifications in procurement, supply chain management, or contract management (e.g., CPM, CSCP).
• Proactive and self-motivated, with a focus on continuous improvement and operational excellence.
• Willingness to travel within the region as required.
• DayOne is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
• If you're ready to grow with one of the fastest-moving companies in the data center industry, apply now and be part of our global journey.

Experience:

1 year required

Skills:

Mechanical Engineering, Procurement, CAD

Job type:

Full-time

• Bangkok, Bangkok, Thailand.
• Eco Plant Services Co., Ltd.
• Apply for Position.
• Or refer someone.
• Job Openings.
• Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• About the job Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• VSPP Power Plant & Renewable field.
• Fuel MSW & Industrial Waste Power Plant is a special consideration.
• EPC Business Turnkey (Engineering, Procurement and Construction).
• Satisfy Owner Requirements based on Design, Regulations, Laws, Standards, Codes and advise customer solutions.
• Provide design for safe operation & maintenance with recommended solutions to owner.
• Familiar with the process of related permits: EIA, EHIA, COP, Construction Permit, Factory License requirements, PEA, and ERC.
• Prepare Tendering, Bidding, and Proposal in terms of Technical Data & support for Mechanical Process, Boiler, Ash Handling System, Steam Turbine, Air-Cooled/Water-Cooled Condenser, Air Compressor, Fuel Feeding System, Flue Gas Treatment System, Water Treatment Plant according to TOR.
• Clarify requirements and follow up on, or clear, pending issues and lists via Piping Specifications & Routes, Equipment General Arrangement (GA), P&ID as mechanical integration with other systems such as Tie-in or Terminal Points.
• Verify and cross-check Heat and Mass Balance, Firing Diagram of Combustion, Water Balance, Utility Consumption in Mechanical field.
• Raise any mechanical concern or critical issue to team, if any, for consultation and resolution with team decision-makers, such as deviations from TOR, high impacts to cost, improper design, unsafe operation, or mismatches with other systems.
• Maintain close contact with Owners, Suppliers, Contractors, Vendors, and internal departments for implementation and rectification of related issues.
• Bachelor's Degree in Mechanical Engineering.
• At least 3-5 years of experience in Power Plant Design is preferred.
• Proficient in CAD software and Drawing Viewer applications.
• Understand the basic overall process of a Power Plant.
• Basic knowledge of rotating machinery such as Boiler Feed Water Pumps, Fans, Valve Types, Piping, Pressure Parts, ASME, ASTM, ANSI, JIS, DIN, GB, and EN.
• Commissioning and testing of machinery and piping such as Pressure Test, Cleaning, Leak Test in Water, Air, Chemical, etc.
• Basic knowledge of Operation & Maintenance in Power Plants, Consumption & Consumables for running Power Plants, Discharge Ash Treatment, Flue Gas Emission Control, Water Regulations.
• Communication skills with the ability to quickly summarize key points.
• Coordination with Suppliers, Owners, Contractors, Team Members, and internal departments.
• Apply for Position.
• Or refer someone.
• Share.
• Facebook.
• Line.
• LinkedIn.
• X (Formerly Twitter).
• Whatsapp.
• Email.

Skills:

Electrical Engineering, Project Management, Quality Assurance, Risk Management, Revit, BIM

Job type:

Full-time

• Taking responsibility for delivery of projects from initial design, through to construction and final review.
• Be the point of contact for the client team on day-to-day project matters.
• Lead a large project design team, oversee and coordinate the work of a team multi-disciplinary engineers, designers and drafters. Engineering disciplines to be managed and coordinated include mechanical and electrical, civil, structural, security, architectural and ICT.
• Working in collaboration with other design disciplines, locally and regionally to ensure the integrity of the overall design.
• Lead the multi-disciplinary team in the production of design documentations including detailed design drawings, specifications, design report, calculations, BIM models, and other technical documents.
• Chair internal and external design meetings.
• Managing projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications.
• Assisting in workload management and resource forecasting and involved in preparation of proposal documentation.
• Reviewing and ensuring compliance, including drawings, reports, specifications, survey, access, and preparation of appraisals.
• Building and maintaining effective relationships with clients, recognizing, and developing potential business opportunities.
• Applying an understanding of construction/engineering project management principles to plan and deliver infrastructure projects of varying complexity.
• Managing work programmes to ensure that they are delivered to client expectations, timeframes and specifications.
• Engaging with multiple stakeholders and managing competing priorities.
• Supporting multiple concurrent projects across the entire life cycle, including planning, design verification, tendering, contract administration, financial management, project scheduling and risk management.
• We know today's complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.
• What can you bring to the team?.
• A Bachelor's Degree in Mechanical or Electrical Engineering, with at least 10 years' relevant experience in Buildings Mechanical or Electrical Design, installation and testing and commissioning, and leading delivery of multi-disciplinary projects in modern commercial and industrial buildings. Data Centre Experience will be preferred.
• Strong project management skills with ability to lead a large project team on technical delivery.
• Excellent presentation, verbal, and written communication skills.
• Sufficient experience to demonstrate intermediate to advanced knowledge of relevant engineering codes, standards, and practices.
• Organized approach and ability to accept increased responsibility and produce accurate and detailed work.
• High level of computer literacy and exposure to BIM / Revit will be highly desired, with advanced problem-solving skills through investigation and analysis.
• Literacy in the use of digital tools such as Autodesk Construction Cloud, Autodesk Naviswork, BIM360 and drive BIM processes.
• Strong ability in navigating 3D BIM model to review multi-disciplinary design, identify issues, provide solutions and delegate the design team to resolve them.
• Our Aurecon Attributes define our way of being - they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don't expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here https://www.aurecongroup.com/careers/culture/aurecon-attributes.
• We value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?.
• About Us.
• Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.
• Over the last 85 years, our team of more than 7,800 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world's most complex challenges.
• In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking - an approach that is guided by digital engineering, the user experience and sustainability - ensuring that the work we do is future ready and leaves a legacy for the next generation.
• Think engineering. Think again.

Experience:

5 years required

Skills:

Mechanical Engineering, AutoCAD, Revit, BIM

Job type:

Full-time

• Designing the Mechanical and Plumbing systems, and utilizing Revit to create and maintain BIM models.
• Preparing and developing detailed Revit models of Mechanical & Plumbing systems.
• Preparing detailed calculations of Mechanical & Plumbing systems.
• Developing & publishing construction documentation for Mechanical & Plumbing building systems designs to meet scheduled deliverables.
• Updating and modifying existing models and construction documents as required.
• Assist with creating and maintaining standard regional BIM templates.
• Participate in design coordination meetings with other trades for clash detection and resolution.
• Assist the project team with information exchange processes between internal and external customers.
• Provide coordination support for information requests during construction phases.
• We know today's complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.
• What can you bring to the team?.
• Bachelor's degree in Mechanical Engineering.
• At least 5-6 years of experience in the design of HVAC and other building services systems.
• Have basic knowledge to apply principals to design modelling and drawing production.
• Have basic knowledge of the following software tools: AutoCAD, Navisworks, Bluebeam.
• Familiarity with the BIMForum LOD Specification, plus AIA and NBIMS standards and best practices for BIM collaboration.
• Keen to have knowledge on construction technology and construction practices.
• Keen to learn new BIM tools, procedures, best practices.
• Our Aurecon Attributes define our way of being - they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don't expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here.
• Finally, we value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?.
• About Us.
• Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.
• Over the last 85 years, our team of more than 5 000 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world's most complex challenges.
• In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking - an approach that is guided by digital engineering, the user experience and sustainability - ensuring that the work we do is future ready and leaves a legacy for the next generation.
• Think engineering. Think again.
• Want to know more?.
• You can learn more about what it's like to work at Aurecon by visiting the careers section of our website.
• If you are intrigued or excited by what you have read, then we want to hear from you. Apply now!.

Experience:

2 years required

Skills:

Mechanical Engineering, English

Job type:

Full-time

• NVMS is a solutions sales and support provider that provides a high technology service to enable our clients to better manage their plant and equipment in a safe, practical and cost effective manner.
• We specialise in the area of Pressure instruments, Electrical, condition & performance monitoring, sales and supports, customised hardware and software solutions, site installation commissioning and support of monitoring systems, and practical instrument training.
• Our reputation for the highest quality, best value in the industry is born of a culture that "takes excellent care of our customers.".
• Mechanical Engineer (Vibration and Monitoring Solutions).
• Due to our expanding opportunities in the Thailand region, we are seeking a Mechanical Engineer for Vibration and Monitoring services..
• Electrical Solutions/products Sale experiences for minimum 2 years.
• Bachelor s degree in engineering (Mechanical/Electrical/Instrument Engineering or relevance).
• Any background of Vibration & Monitoring installation is advantage.
• Able to work independently for Mechanical & Electrical installation and configuration.
• Any background of Vibration, Asset monitoring, able to use AutoCAD are advantages.
• Good writing, listening, and speaking English are preferences.
• Can be based in Rayong or Bangna office.
• Able to travel around the country and oversea.
• A high regard for safety and health at all times..
• Why NVMS?.
• As an employee you will enjoy a friendly, professional, and high-performance culture where you will be exposed to continual career opportunities. This is a great opportunity to contribute to an already successful organisation during an exciting time of growth and change..
• Minimum 2 years of technical sales experience, in the field of industrial/power plant/Main Contractor/Project Consultant.
• Excellent about Electrical transmission/districution System.
• Knowledgeable about Electrical solutions for transmission/distribution system.
• Excellent customer relationship skills.
• Experience in oil and gas, power, general industry.
• Job Function:.
• Design, Engineering, Installing & Configuring Services.
• Customer visit regularly for Bangkok, Chonburi, Rayong and other provinces, and Lao PDR.
• Site survey.
• Services price estimation.
• Report to Sales Manager/General Manager.
• Job Location: Bangkok > Bangna/Rayong, Rayong Office (Map-Tapud).
• Empl. Term: Full Time.
• Salary Details: Monthly THB.
• negotiable.
• Keywords: Technical Sales Engineer.

Experience:

1 year required

Skills:

AutoCAD, Thai

Job type:

Full-time

• ควบคุมติดตั้งงานระบบประกอบอาคาร.
• จัดทำแผนงาน เคลียร์ shop Drawing ตรวจสอบเอกสาร รายงานวางแผนความคืบหน้า.
• ทำเอกสารต่าง ๆ ที่เกี่ยวข้อง Method ขออนุมัติวัสดุอุปกรณ์ ร่วมประชุมติดตามงาน.
• งานอื่น ๆ ที่ได้รับมอบหมาย.
• สามารถไปปฎิบัติงานตามไซต์งานได้.