Filter Jobs

Skills:

CAD

Job type:

Full-time

Develop and manage CAD models for engineering projects, ensuring compliance with industry standards and company guidelines.

Experience:

2 years required

Skills:

Thai

Job type:

Full-time

• Produce 3D models, construction drawings, layouts, sections, details, and design documentation in accordance with project requirements.
• Develop site layouts, grading plans, road alignments, utility systems, drainage networks, and earthwork models as required.
• Create and maintain BIM models and participate in multidisciplinary design coordination activities.
• Assist engineers in the preparation of design packages, material take-offs, quantity calculations, and technical documentation.
• Coordinate with civil, structural, mechanical, electrical, and architectural disciplines to ensure design consistency and constructability.
• Participate in model reviews, clash detection exercises, and design coordination meetings.
• Ensure drawings and models comply with applicable design standards, project specifications, and quality procedures.
• Support engineering and construction teams by incorporating design revisions, responding to comments, and maintaining project documentation.
• Maintain drawing registers, model databases, and digital project information in accordance with company BIM and document control standards.
• Education.
• Diploma or Bachelor's Degree in Civil Engineering, Structural Engineering, Construction Technology, Drafting, BIM, or a related discipline.
• Experience.
• Minimum 2 - 5 years of experience in civil design drafting, BIM modelling, or engineering design support.
• Experience in industrial, infrastructure, building, power, energy, or EPC projects is preferred.
• Experience preparing civil, structural, utility, or site development drawings and models.
• Technical Competencies.
• Knowledge of civil and structural drafting principles, construction drawings, and engineering documentation.
• Understanding of site development, grading, drainage, utility systems, foundations, and structural detailing.
• Familiarity with BIM workflows, drawing standards, and multidisciplinary project coordination.
• Software Skills.
• AutoCAD.
• Autodesk Civil 3D.
• Revit.
• TEKLA Structures.
• Navisworks.
• BIM coordination and model review tools.
• Other Skills.
• Strong attention to detail and commitment to quality.
• Ability to manage multiple assignments and meet project deadlines.
• Good communication and coordination skills.
• Ability to work effectively within multidisciplinary project teams.
• Basic to intermediate English communication skills.
• Friendly international working environment with a wide variety of interesting and challenging tasks.
• Competitive salary package.
• Well-balanced working hour.
• Career opportunity in one of the largest international consulting and engineering companies.
• Possibility to grow professionally and advance in career.
• At AFRY, we engineer change in everything we do. Change happens when brave ideas come together. When we collaborate, innovate technology, and embrace challenging points of view. That's how we're making future. We are actively looking for qualified candidates to join our inclusive and diverse teams across the globe. Join us in accelerating the transition towards a sustainable future.

Experience:

1 year required

Skills:

SOLIDWORKS, Teamwork, AutoCAD, SAP B1, English

Job type:

Full-time

• CAD Drawing & Documentation.
• Create and modify CAD drawings for pump layouts, assemblies, and related components.
• Maintain drawing records and ensure compliance with engineering standards.
• Support technical documentation needs for project bids and order processing.
• Coordination with Sub-Suppliers.
• Request quotations from sub-suppliers for non-standard items not listed in the standard price list.
• Evaluate and compare sub-supplier quotations for technical and commercial alignment.
• Maintain strong communication to ensure lead times and technical requirements are met.
• CRM & SAP B1 Updates.
• Update CRM with quotation details, revisions, and status tracking.
• Process pump and spare part orders in both CRM and SAP B1 systems.
• Ensure all system records are accurate and up-to-date to support order fulfillment and reporting.
• Sales & Project Support.
• Support the sales team during the bidding stage by providing technical clarification and documentation.
• Review and verify order requirements before processing.
• Communicate with the factory for technical specifications and order follow-ups.
• Bachelor's degree in Engineering or related field.
• 1 - 3 years in application engineering, technical sales, or related roles in the pump or rotating equipment industry.
• Knowledge of pump types and applications.
• Proficiency in CAD software (AutoCAD, SolidWorks, or similar).
• Familiarity with CRM and SAP B1 systems (preferred).
• Good command of English (written & spoken).
• Strong analytical skills, attention to detail, and ability to work under tight deadlines.
• Key Competencies.
• Strong technical understanding of pumps and rotating equipment.
• Good problem-solving and decision-making skills.
• Excellent communication and teamwork abilities.
• Customer-oriented mindset with a focus on delivering accurate and timely solutions.
• Interested applicants are invited to email your detailed resume stating current, expected salary, to.
• NETZSCH (Thailand) Limited.
• 25/22,24 Moo12, Bueng Kham Phoi, Lamlukka, Pathumthani 12150.
• 66 - --- -325.
• 66 - --- -326.
• netzsch.com.
• netzsch.com.

Skills:

CAD

Job type:

Full-time

• one of the largest global innovative companies, with more than 20,000 engineers working in Research & Development.
• a multi-cultural environment that values diversity and international collaboration.
• more than 100,000 colleagues in 31 countries. which make a lot of opportunity for career growth.
• a business highly committed to limiting the environmental impact if its activities and ranked by Corporate Knights as the number one company in the automotive sector in terms of sustainable development.
• https://www.valeo.com.

Experience:

3 years required

Skills:

Industrial Engineering, Mechanical Engineering, Product Development, SOLIDWORKS, Teamwork, AutoCAD, English, Thai

Job type:

Full-time

• Design curing molds and tooling solutions: Develop dimensional technical standards and detailed designs for curing mold components and associated tooling based on tire geometrical definitions and engineering requirements.
• Ensure manufacturing readiness and data quality: Provide accurate and timely manufacturing data, including design drawings, technical specifications, and bill of materials, to support mold manufacturing and production activities.
• Support continuous improvement and technical problem-solving: Collaborate with manuf ...
• Designing curing mold components and associated tooling according to technical standards and customer requirements.
• Creating and maintaining engineering drawings, design documentation, and bills of materials.
• Ensuring mold definitions comply with design guidelines and manufacturing constraints.
• Supporting mold manufacturing teams with technical expertise and troubleshooting.
• Analyzing tooling performance and identifying opportunities for improvement.
• Assisting in the resolution of dimensional, quality, and manufacturing issues.
• Collaborating with product, manufacturing, and quality teams throughout the development process.
• Supporting continuous improvement initiatives related to mold and tooling design.
• Who We Are Looking for.
• Required.
• Bachelor's Degree or higher in Mechanical Engineering, Manufacturing Engineering, Tooling Engineering, Industrial Engineering, or related fields.
• Experience in mechanical design, tooling design, mold design, or manufacturing engineering environments.
• Ability to interpret technical drawings and engineering specifications.
• Strong analytical and problem-solving skills.
• Good communication and teamwork capabilities.
• Business proficiency in Thai and English.
• Preferred.
• Experience with CAD software (e.g., CATIA, SolidWorks, Creo, AutoCAD).
• Knowledge of mold manufacturing, tooling processes, or industrial production environment.

Experience:

1 year required

Skills:

Electrical Engineering, AutoCAD, English

Job type:

Full-time

• Draftsman Engineering (Solar Business).
• Job Responsibilities.
• Prepare Solar Rooftop system drawings using AutoCAD or other CAD software.
• Design roof layout plans, PV installation layouts (PV Layout), wiring diagrams, and related.
• engineering drawings.
• Prepare approval drawings and documentation required for submission to government agencies.
• Review and revise drawings based on input from engineers, clients, or other departments to ensure.
• compliance with project standards.
• Conduct site visits to collect necessary data for design work.
• Maintain drawing files, revisions, and technical documents in an organized manner.
• Coordinate with engineering, sales, and project teams to support timely installation and project.
• completion.
• Job Qualifications.
• Bachelor's degree in Electrical Engineering or related field.
• Hold a valid Electrical Professional Engineer License (สามัญวิศวกรไฟฟ้ า - สฟ.) is preferable.
• 1- 3 years of experience in Solar Rooftop drafting.
• Strong proficiency in AutoCAD and CAD-related software.
• Strong coordination, communication, and problem-solving skills; able to explain drawings clearly and collaborate with internal and external teams.
• Fluent in English both written and verbal (Minimum 750 TOEIC score).
• Ability to travel/work upcountry and abroad.
• Goal - Oriented, Unity, Learning, Flexible.

Experience:

15 years required

Skills:

Product Development, Industrial Design, Architecture, Data Entry, Assembly, CAD

Job type:

Full-time

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Job Title: Lead Engineer, PCB Layout Engineer.
• Functional Area: Engineering (ENG).
• Career Stream: Design Engineering Electrical (DEE).
• Role: Lead Engineer (LEN).
• Job Code: LEN-ENG-DEE.
• Job Band: 08.
• Direct/Indirect Indicator: Indirect.
• Summary.
• The PCB Senior Layout Engineer works with a cross functional design engineering team, customers, manufacturing engineering and project managers to ensure robust and high quality product development. Enhance PCB designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations. Provide support throughout the manufacturing process of the electrical/mechanical system that they have designed when necessary.
• Detailed Description.
• Spearhead the pcb design, development, and implementation of technical solutions for complex, multi-domain projects.
• Act as a skilled pcb engineer, offering technical solutions and directions to design peers. Will also analyze pcb assembly and recommend solutions.
• Review and interpret customer requirements and specifications, and potentially serve as the secondary customer contact.
• Create, modify, and improve pcb designs and techniques using Computer-aided Design (CAD) software.
• Support creation and review of ECAD logical and physical libraries.
• Understands and replies to pcb fabrication technical queries.
• Research new system ideas, create design plans, and modify existing systems to meet both customer and Celestica's needs. Will also solve complex problems and create designs that adhere to all relevant procedures and standards.
• Participate in project planning, scheduling, and design reviews. Will provide feedback and support to other engineering functions from the initial design phase through manufacturing to resolve any issues.
• Keep up-to-date with relevant industry knowledge and regulations to ensure all designs and processes remain compliant.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• PCB Design Expertise: Expert in Cadence Allegro (versions 17.x/24.x) or Altium Designer 26, and experienced with high-density PCBs (up to 20 layers) and high-speed layout designs with high-speed interfaces with controlled impedance, microvias and define good power planes.
• Technical Knowledge: Good knowledge of PCB & PCBA manufacturing processes, industry and quality standards (including IPC), Signal Integrity, EMC, and EMI layout requirements.
• Experience in high-speed digital and analog hardware design and development, with an understanding of architecture, reliability, prototyping, and failure analysis. Specific experience with memory, PCIe, Ethernet, power supply is highly valued.
• The ability to work collaboratively in a global team to meet aggressive deadlines and quality standards is required. A self-motivated individual capable of working in a dynamic environment with complex design requirements.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Typical Experience.
• 10 to 15 years of related experience; experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Experience:

5 years required

Skills:

Electrical Engineering, Mechanical Engineering, Product Development, SOLIDWORKS, Teamwork, English

Job type:

Full-time

• We are looking for a Design Engineer (Outdoor Unit) to support the development of air conditioner products, focusing on structural design and outdoor unit engineering.
• This role is responsible for ensuring product designs meet customer requirements, performance standards, and manufacturability, while supporting testing, validation, and mass production readiness.
• Design structural components for air conditioner outdoor units.
• Create and maintain 2D and 3D drawings using SolidWorks.
• Develop and manage Bill of Materials (BOM) for production.
• Conduct structural testing and analysis to ensure product performance and reliability.
• Ensure designs comply with customer requirements and international standards.
• Troubleshoot and resolve issues related to design and structural performance.
• Collaborate with cross-functional teams to support product development and production.
• Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field.
• 0-2 years of experience in 2D/3D design using SolidWorks.
• Knowledge of air conditioning systems (refrigerant cycle, piping, components) is preferred.
• Strong analytical and problem-solving skills.
• Good teamwork and communication skills.
• Basic to good command of English.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

Experience:

5 years required

Skills:

Mechanical Engineering, Product Development, Product Design, Cost Analysis, SOLIDWORKS, AutoCAD

Job type:

Full-time

• We are seeking a skilled Design Engineer (Indoor) to lead the design and development of air-conditioner indoor unit structures. This role will focus on product design, performance validation, and cost optimization to support new model development.
• Design and develop indoor unit structures (3D models and technical drawings).
• Conduct structural testing, analysis, and validation to ensure product performance and reliability.
• Perform cost analysis and optimization aligned with product targets.
• Support new product development (NPD) from concept through testing phase.
• Ensure designs meet engineering standards, quality, and cost requirements.
• Bachelor's Degree in Mechanical Engineering or related field.
• Minimum 0-3 years of experience in air-conditioner or HVAC structure design.
• Proficient in SolidWorks, AutoCAD, and MS Office.
• Strong understanding of design, testing, and cost engineering principles.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.
• to read the Job Applicant's Privacy Notice.

Experience:

3 years required

Skills:

Product Development, Industrial Design, Data Entry, Sketch, SAP

Job type:

Full-time

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Functional Area: Engineering.
• Career Stream: Design Engineering Mechanical.
• SAP Short Name: ENG-ENG-DME.
• Job Level: Level 07.
• IC/MGR: Individual Contributor.
• Direct/Indirect Indicator: Indirect.
• Summary.
• The Engineer, Mechanical Design develops new mechanical systems/modules and maintains existing designs. Research mechanical concepts and create system solutions using 3D modeling and simulation software. Complete calculations and test, validate, and qualify their systems and make adjustments as needed. Provide support throughout the manufacturing process of the mechanical system that they have designed.
• The Engineer, Mechanical Design works with cross functional teams of other engineers, customers, supply chain and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.
• Detailed Description.
• Work independently to design and develop technical solutions without assistance in a limited number of technical fields supporting common segments/technologies. May also solve complex problems in cooperation with a team of other engineers.
• Attend and interact in technical customer meetings.
• Prepare calculations on the proposed solution before completing technical drawings.
• Design, modify and implement systems that meet customer and Celestica needs. E.g. Sketch and draw up designs using input from other engineers, requirements and input from design review (DFx) team.
• Create designs in line with company procedure, regulations and client standards.
• Submit drawings to management, engineering teams and customers for review.
• Use customer feedback and data to upgrade, improve or repair the company's existing machines.
• Provide support during the manufacturing process.
• Finalize designs and send prints to the production department.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Experience:

No experience required

Skills:

SOLIDWORKS

Job type:

Full-time

• และ จัดสร้างเครื่องจักรในระบบลำเลียงวัตถุดิบทุกรูปแบบ.
• (สายพานลำเลียง - สกรูลำเลียง - ระบบโซ่ลำเลียง - กะพ้อ).
• กำลังเปิดรับสมัครเพื่อนร่วมทีมรุ่นใหม่ ไฟแรง
• เพศชาย อายุ 22 - 25 ปี.
• วุฒิการศึกษา ปริญญาตรี สาขาวิศวกรรมเครื่องกล.
• หรือ สาขาที่เกี่ยวข้อง.
• สามารถใช้งานโปรแกรม AutoCAD.
• หรือ SolidWorks ได้ดี.
• ยินดีรับนักศึกษาจบใหม่ และผู้ที่สนใจงานออกแบบเครื่องจักร.
• ออกแบบ และจัดทำแบบวิศวกรรมเครื่องจักรควบคุม.
• และบริหารโครงการที่ได้รับมอบหมาย.

Skills:

CAD, BEM, SAP

Job type:

Full-time

Job Scope ปฏิบัติงานตามแผนงานซ่อมบำรุง งานบำรุงรักษาเชิงป้องกัน ปรับปรุงเครื่องจักร และอุปกรณ์การผลิตของแต่ละโรงงานใน Agro BU ให้เป็นไปตามแผนงาน และเป็นระบบ รวมทั้งศึกษา และวิเคราะห์เพื่อพัฒนาปรับปรุงงานเพื่อให้ประสิทธิภาพสูงสุด Job Details 1.ดำเนินการซ่อม บำรุงรักษา คืนสภาพ (Process) โดยใช้ระยะเวลาให้น้อยที่สุด และต้นทุนการซ่อมบำรุงเหมาะสม เพื่อให้พร้อมใช้งานอยู่เสมอ รวมทั้งปลอดภัยต่อผู้ใช้งาน และลดความสูญเสียในทุกด้านให้เหลือน้อยที่สุด 2.ดำเนินการงานสร้าง, Small Project (Process) ให้ได้ตามวัตถุประสงค์พร้อมทั้ง Update ข้อมูลการเปลี่ยนแปลงให้ทันสมัย(Process) ให้มีประสิทธิภาพ 3.ศึกษ ...

Experience:

4 years required

Skills:

Project Management, Product Testing, Product Design, Architecture, Electronics, Data Entry, Teamwork, Assembly, Python, CAD, C++, English

Job type:

Full-time

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• General Overview.
• Functional Area: Engineering (ENG).
• Career Stream: Test Engineering Development (TED).
• Role: Engineer (ENG).
• Job Title: Engineer, Test Development.
• Job Code: ENG-ENG-TED.
• Job Level: Level 07.
• Direct/Indirect Indicator: Indirect.
• Summary.
• The Engineer, Test Development designs, develops and implements automatic test equipment and test programs for product testing and design verification which ensure robust and high quality assembled products in manufacturing.
• The Engineer, Test Development may specialize in many areas but are generally categorized into Structural (verification of an assembly process by testing each of its smaller elements and their interconnects) and Functional (verification that a design will perform its main purpose).
• Detailed Description.
• Design and develop the functional testers including hardware & software elements following the customer test specification/test requirement.
• Review equipment data sheets and select appropriate equipment based on requirements.
• Support creation of structural or functional test strategy and test plan to meet project goals and requirements.
• Support creation of technical proposals with costed BOM and hours estimates.
• Debug tester issues using the design of experiments, tools, and failure analysis methodologies.
• Ensure to deliver the goods and follow the project plan. Project management and cost planning.
• Provide high-level test hardware and software solution architecture.
• Provide technical support to the production team. For engineering change, fixing the fault failure issue.
• Review the tester concept design with the mechanical engineer and provide good feedback to meet the project goals and requirements.
• Collaborate with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics, and user experience.
• Create reports and documentation.
• Perform tester commissioning on local / overseas.
• Drive problem-solving and corrective action related to the causes of the project issue.
• Able to support production work abroad at different times. In a necessary situation Whether it's remote control or answering emails.
• Responsible for overseeing project execution and ensuring timely completion by analyzing project scope and defining specifications.
• Develop test methods for product investigations, assess the adequacy and sequence of test programs, and examine samples to ensure compliance with requirements.
• Identify key factors [Risk/Mitigation plan ] for tester improvement and customer satisfaction enhancement.
• Prepare comprehensive reports documenting project proposals and outcomes estimation.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Bachelor's degree in Electronics, Industrial, Mechatronic engineering, or in a related field.
• Proficiency in developing programming languages such as Labview, Teststand, Python, Robot Framework, C and C++.
• Ability to read hardware schematic. Compare and understand equipment specifications. [Proficiency with Altium software/Easyeda is preferred.].
• Strong skill in wiring and equipment assembly.
• Have background experience in 3D/CAD review (SolidWork).
• Ability to work under pressure and with limited time, positive attitude, teamwork, and good interpersonal skills.
• Able to travel locally / overseas for test product implementation, and commissioning.
• Professional written and verbal communication skills in English.
• Males must be exempt from military service.
• Minimum of 5 years of working experience in test development or related industry.
• Strong analytical skills in innovative approaches to electrical circuit systems/PCB design development.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• Minimum of 5 years of working experience in test development or related industry.
• Typical Education.
• Bachelor's degree in Electronics, Industrial, Mechatronic engineering, or in a related field.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Skills:

CAD, BEM, SAP

Job type:

Full-time

Job Scope ปฏิบัติงานตามแผนงานซ่อมบำรุง งานบำรุงรักษาเชิงป้องกัน ปรับปรุงเครื่องจักร และอุปกรณ์การผลิตของแต่ละโรงงานใน Agro BU ให้เป็นไปตามแผนงาน และเป็นระบบ รวมทั้งศึกษา และวิเคราะห์เพื่อพัฒนาปรับปรุงงานเพื่อให้ประสิทธิภาพสูงสุด Job Details 1.ดำเนินการซ่อม บำรุงรักษา คืนสภาพ (Process) โดยใช้ระยะเวลาให้น้อยที่สุด และต้นทุนการซ่อมบำรุงเหมาะสม เพื่อให้พร้อมใช้งานอยู่เสมอ รวมทั้งปลอดภัยต่อผู้ใช้งาน และลดความสูญเสียในทุกด้านให้เหลือน้อยที่สุด 2.ดำเนินการงานสร้าง, Small Project (Process) ให้ได้ตามวัตถุประสงค์พร้อมทั้ง Update ข้อมูลการเปลี่ยนแปลงให้ทันสมัย(Process) ให้มีประสิทธิภาพ 3.ศึกษ ...

Skills:

Microsoft Office, Electronics, Teamwork, CAD, English

Job type:

Full-time

• Plan, design, develop, and evaluate car multimedia and telematics components.
• Manage development projects with internal teams and external stakeholders.
• Review certification and regulatory requirements related to automotive electronic components.
• Prepare and verify electronic-part drawings and other required engineering documents.
• Collect and summarize technical data, and prepare reports and presentations using Microsoft Office.
• Use CAD and wiring-design software to support component and system development.
• Conduct product benchmarking and translate findings into development insights.
• Investigate and coordinate corrective actions for issues identified after product launch.
• About you.
• Bachelor's degree in Mechatronics, Software Engineering, Electronics, Computer Engineering, or a closely related engineering field. (GPA > 2.50).
• New graduates are welcomed.
• Good command of English with a TOEIC score of more than 600.
• Clear communication and effective teamwork.
• Sound decision-making and structured problem-solving skills.
• Self-motivation, logical thinking, and willingness to learn new technologies.
• Ability to coordinate work across multiple stakeholders and follow engineering documentation requirements.
• Valid driving licence (advantageous).
• Experience or academic exposure in embedded-system design and programming (advantageous).
• Familiarity with CAD, wiring design, automotive electronics, multimedia, or telematics systems (advantageous).

Skills:

CAD, SketchUp, Power BI

Job type:

Full-time

• เก็บและวิเคราะห์ข้อมูลยอดขาย / การดูดซับบ้าน (Absorption Rate) รายเดือน.
• คำนวณและปรับ Target Stock, Safety Stock, และ Inventory Turnover Rate.
• ตรวจสอบและรายงาน Stock Availability Rate ของแต่ละโครงการ.
• ทำ Dashboard สรุปสถานะบ้านคงเหลือ, ยอดขาย, และอัตราหมุนเวียน.
• ประสานงานกับฝ่ายก่อสร้าง, ฝ่ายขาย, และฝ่ายวางแผน เพื่อปรับปริมาณการผลิต/ก่อสร้างให้เหมาะสม.
• ถอดแบบประมาณราคา.
• บริหารและจัดการต้นทุนโครงการ.
• มีประสบการณ์ 2 - 5 ปี ด้านใดด้านมากกว่า 1 ด้าน.
• Inventory Control / Planning.
• Supply Chain / Demand Planning.
• Cost Estimate.
• Property Management / Real Estate Development.
• ปริญญาตรี สาขา วิศวกรรมโยธา, เศรษฐศาสตร์, การจัดการอุตสาหกรรม หรือ อสังหาริมทรัพย์.
• ปริญญาโท (หากมี) ในด้าน Construction Management หรือ Supply Chain Management หรือ Real Estate Development จะได้รับการพิจารณาเป็นพิเศษ.
• Skills.
• Microsoft Excel / PowerPoint.
• Auto CAD / Sketchup.
• Microsoft Power Query / Pivot Table / Lookup / Data Visualization.
• Power BI / Tableau.
• พื้นฐาน Data Analytics (เช่น Python, SQL, Google Data Studio, Automation (หากมี).
• ฝ่ายทรัพยากรบุคคล.
• บริษัท เอสซี แอสเสท คอร์ปอเรชั่น จำกัด (มหาชน)อาคารชินวัตร ทาวเวอร์ 3 ชั้น 10.
• เลขที่ 1010 ถนนวิภาวดี - รังสิต.
• แขวงจตุจักร เขตจตุจักร กรุงเทพฯ 10900.
• โทรศัพท์ 02------544.
• Website: www.scasset.com.

Skills:

CAD, SketchUp, Power BI

Job type:

Full-time

• มีประสบการณ์ 1 - 2 ปี ด้านใดด้านมากกว่า 1 ด้าน.
• Inventory Control / Planning.
• Supply Chain / Demand Planning.
• Cost Estimate.
• Property Management / Real Estate Development.
• ปริญญาตรี สาขา วิศวกรรมโยธา, เศรษฐศาสตร์, การจัดการอุตสาหกรรม หรือ อสังหาริมทรัพย์.
• Skills.
• Microsoft Excel / PowerPoint.
• Auto CAD / Sketchup.
• Microsoft Power Query / Pivot Table / Lookup / Data Visualization.
• Power BI / Tableau.
• พื้นฐาน Data Analytics (เช่น Python, SQL, Google Data Studio, Automation (หากมี).
• ฝ่ายทรัพยากรบุคคล.
• บริษัท เอสซี แอสเสท คอร์ปอเรชั่น จำกัด (มหาชน)อาคารชินวัตร ทาวเวอร์ 3 ชั้น 10.
• เลขที่ 1010 ถนนวิภาวดี - รังสิต.
• แขวงจตุจักร เขตจตุจักร กรุงเทพฯ 10900.
• โทรศัพท์ 02------544.
• Website: www.scasset.com.

Skills:

Budgeting, CAD, BIM, English

Job type:

Full-time

• Collaborate with project managers, architects, engineers, design consultants, and hotel operators.
• Prepare design presentations, drawings, and material boards.
• Coordinate with suppliers and contractors to ensure design integrity and build quality.
• Provide technical support during construction, review shop drawings, and address site issues.
• Conduct quality checks.
• Participate in design meetings.
• Support budgeting and scheduling activities.
• Maintain documentation and reporting throughout project lifecycles.
• About you.
• Strong hospitality design development capabilities, including experience with hotel and an understanding of brand-driven guest experiences.
• Proficiency in design and technical tools such as CAD/BIM software, 3D visualization tools, and standard office applications.
• Technical service background, including knowledge of construction methods, building materials, MEP coordination, and the ability to read and interpret architectural and engineering drawings.
• Prior experience with FF&E and OS&E specification will be considered an advantage.
• Effective communication and collaboration skills to work with cross-functional teams, operators, consultants, and contractors, with attention to detail in documentation and reporting.
• Ability to manage multiple projects, prioritize tasks, and meet deadlines in a fast-paced environment, with strong problem-solving and site coordination skills.
• Bachelor's degree in Architecture, Interior Design, or a related field, or equivalent professional experience.
• Experiences in hospitality design within the Bangkok Metropolitan Area or broader regional markets.
• Working proficiency in English and Thai.

Skills:

Industrial Engineering, Recruitment, Assembly, SAP, CAD, English, Thai

Job type:

Full-time

• Improve and monitor Safety in production line, include PPE. MC guard and Tool Equipment calibration.
• Annual revise ABRA, revised if change process and create a new ABRA in case implement new process/MC.
• Involve investigate team when we have an Incident, Accidents, property damage or any near miss in production.
• In charge to reviewed and revised Global standard, provide local WI and training to all Staffs.
• Involve investigate quality issues in production (RCA),find out root cause and setup proactive & preventive action for prevent repetitive problem.
• Support External and Customer audits.
• Improvement and promote to Safety, Quality and Productivity Kaizen.
• Annual Quality & Process training, skill record and Multi skill.
• Cost saving activity, improve rework and material cost. Create Hard & OPEX hard saving.
• Expedite CAPEX activity to meet as cost and delivery plan.
• Main in charge at Final process, specific at Cabling and packing process.
• Contact to SCM,Logistic, Engineer and other section to solving shop floor problem.
• Can rotation to other process as Supervisor assignment.
• Bachelor's degree of Electrical, Mechatronic, Industrial Engineering or in any field.
• 7 - 12 years' Experience in productions planning and shop-floor control and/or productions improvement and process improvement.
• Experience in Transformer Manufacturing will be advantage.
• Good command of Thai, English communication.
• Understanding of and ability to manage Engineering Order (EO) production processes.
• Computer skill in SAP-PP module will be advantage.
• Good Knowledge in computer engineering applications (PLC, Auto CAD).
• Reporting to Production Manager.
• We offer.
• 1 month of guaranteed bonus (Fix bonus) plus Performance Bonus. (Depending on employee's performance result and Business performance).
• 10 days annual leave (Service year 0-5), 15 days annual leave (Service year 6-10), flexible working policy, Flexibility working time.
• Benefit according to local standards: Heath-care insurance benefits to employees and their dependents, annual health checkup, Provident Funds (employees can contribute up to 15%).
• Growth possibility: Learning and development platform, career movement opportunity within organization.
• Possibility to gain experience in international environment.
• Accessibility and reasonable accommodation.
• Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a _general inquiry form_on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.
• This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.
• Use of Al and automated tools in recruitment.
• As part of our recruitment process, Hitachi Energy uses digital and automated tools, including Al-supported solutions, to assist with activities such as application screening, job matching, and interview scheduling. These tools are designed to support our recruiters and do not replace human decision-making. Candidate data is processed in accordance with applicable data protection and employment laws as well as _Hitachi 's Global Data Privacy Notice._.
• Background Screening and Security Checks.
• As part of the hiring process, Hitachi Energy conducts pre-employment background checks that may include verification of employment history, education, criminal records, and other relevant information, in accordance with applicable laws.
• For certain roles - particularly those involving access to sensitive information, financial responsibilities, client data, regulated environments, or security-sensitive functions - additional or more comprehensive background or security screenings may be required. These may include, but are not limited to, enhanced criminal history checks, credit history reviews (where legally permissible), sanctions screening, or other due diligence measures aligned with the responsibilities of the position.
• The scope and depth of any background or security review will be determined based on the nature of the role and business necessity, and will always be conducted in compliance with applicable federal, state, and local laws. Candidates will be notified and, where required, asked to provide consent prior to the initiation of any such checks.

Skills:

Automation, HACCP, CAD

Job type:

Full-time

• บริหารและวางแผนซ่อมบำรุง (PM): วางแผนและควบคุมการซ่อมบำรุงเชิงป้องกันเครื่องจักรในกระบวนการผลิตเพื่อให้กระบวนการผลิตดำเนินไปได้อย่างราบรื่นและมีประสิทธิภาพสูงสุด (Maximize OEE).
• ควบคุมระบบสนับสนุนการผลิต (Utility System): ดูแลระบบสาธารณูปโภคที่สำคัญ เช่น ระบบก๊าซไนโตรเจน (Nitrogen Generator), ระบบลมสะอาด (Compressed Air), ระบบความร้อน และระบบบำบัดน้ำเสีย/กากไขมัน.
• รักษามาตรฐานความปลอดภัยอาหาร (Food Safety & Hygienic Maintenance): กำกับดูแลให้การปฏ ...
• บริหารและพัฒนาทีมงาน: ควบคุม สอนงาน และจัดตารางงานปฏิบัติงานของวิศวกรและช่างเทคนิค เพื่อเข้าแก้ไขหน้างานได้อย่างรวดเร็วเมื่อเกิดเครื่องจักรหยุดฉุกเฉิน (ฺBreakdown).
• การปรับปรุงอย่างต่อเนื่อง (Continuous Improvement): ร่วมพัฒนาโครงการประหยัดพลังงาน โครงการระบบอัตโนมัติ (Automation/PLC) และการลดต้นทุนในกระบวนการวิศวกรรม.
• วุฒิการศึกษา: ปริญญาตรีขึ้นไป สาขาวิศวกรรมศาสตร์ (เครื่องกล, ไฟฟ้า, Mechatronics, Automation หรือสาขาอื่นที่เกี่ยวข้อง).
• ทักษะและความรู้.
• มีความรู้ความเชี่ยวชาญในระบบงานวศิวกรรม, การใช้ซอฟแวร์ CAD.
• มีความเข้าใจระบบมาตรฐานคุณภาพอาหารสากลเป็นอย่างดี (GHPs, HACCP ).
• มีทักษะการวิเคราะห์และแก้ไขปัญหาเครื่องจักร (Root Cause Analysis-RCA).
• มีทักษะความเป็นผู้นำสูง สื่อสารประสานงานระหว่างฝ่ายผลิตและฝ่ายคุณภาพ (QA, QC) ได้ดี.
• สามารถสื่อสารภาษาอังกฤษในการทำงานได้.
• ประสบการณ์.
• มีประสบการณ์ทำงานด้านวิศวกรรม/ซ่อมบำรุงในโรงงานผลิตอาหาร อย่างน้อย 5 ปี.
• มีประสบการณ์ในระดับหัวหน้างาน (Supervisor) หรือผู้ช่วยผู้จัดการ (Assistant Manager) อย่างน้อย 2-3 ปีขึ้นไป.