Filter Jobs

Experience:

3 years required

Skills:

Electrical Engineering, Mechanical Engineering, Quality Assurance, Assurance, English

Job type:

Full-time

• Prepare and maintain Project Quality Plan, Inspection & Test Plan (ITP), Checklists, CCP (Critical Control Point) List, and other relevant quality control documents.
• Review drawings, specifications, method statements, and quality requirements before starting installation work.
• Conduct incoming material inspections and verify that materials and equipment comply with approved specifications and project requirements.
• Perform site inspections during installation activities and ensure that work is carried out according to approved drawings, specifications, method statements, and quality standards.
• Monitor Hold Points, Witness Points, and Critical Control Points (CCP) and coordinate inspections with Project Engineers, Consultants, Clients, and subcontractors.
• Identify quality issues and deviations, issue or coordinate NCR (Non-Conformance Report), and follow up corrective actions until NCR closure.
• Conduct final inspections and verify completed installation works before testing, commissioning, and handover.
• Prepare and maintain inspection records, test reports, checklists, NCR records, and other quality documentation required for project handover.
• Coordinate with Project, Construction, Engineering, Testing & Commissioning, subcontractors, and other relevant teams to resolve quality issues.
• Review test results and verify that systems meet project requirements and acceptance criteria.
• Support Testing & Commissioning (T&C) and project handover activities.
• Analyze recurring quality issues, summarize lessons learned, and recommend corrective or preventive actions to improve construction quality.
• Specific.
• Responsibilities by DisciplineElectrical QC Engineer.
• Inspect and control the quality of electrical installation works, including cable installation, cable termination, electrical panels, grounding/earthing systems, and related electrical systems.
• Review and verify electrical test results such as Insulation Resistance Test, Continuity Test, Grounding/Earthing Test, and Functional Test.
• Ensure electrical installations comply with approved drawings, specifications, applicable standards, and project requirements.
• Use appropriate electrical measuring and testing instruments to verify installation and system quality.
• Mechanical QC Engineer.
• Inspect and control the quality of mechanical installation works, including piping, HVAC, equipment installation, pumps, valves, supports, and related mechanical systems.
• Review and verify mechanical test results such as Pressure Test, Leak Test, Flushing, Alignment, and Performance Test.
• Ensure mechanical installations comply with approved drawings, specifications, applicable standards, and project requirements.
• Use appropriate mechanical measuring and testing instruments to verify installation and system quality.
• Bachelor's degree in Electrical Engineering or Mechanical Engineering, depending on the position applied for.
• Higher Vocational Certificate (Diploma/ปวส.) in a relevant technical field may also be considered for candidates with strong and proven QC experience.
• Minimum 3-5 years of experience in Quality Control / Quality Assurance for MEP construction or installation projects.
• Experience in Data Center, Mission Critical Facility, large-scale MEP, industrial, or complex building projects will be an advantage.
• Good knowledge of Quality Plan, ITP, CCP List, Inspection Checklist, Hold Point/Witness Point, and NCR management.
• Ability to read and understand engineering drawings, specifications, method statements, and technical documents.
• Hands-on experience with relevant electrical or mechanical inspection and testing equipment.
• Good understanding of construction quality standards, inspection procedures, and Testing & Commissioning processes.
• Strong documentation and reporting skills with the ability to maintain accurate and systematic quality records.
• Detail-oriented with strong analytical and problem-solving skills.
• Good coordination and communication skills with project teams, subcontractors, consultants, and clients.
• Basic to good command of English for technical documents, drawings, specifications, and project communication is an advantage.
• Preferred Experience.
• Previous experience in Data Center MEP projects is highly preferred.
• Familiarity with Data Center construction quality requirements, inspection procedures, Testing & Commissioning, and project handover processes will be an advantage.
• Experience working with Main Contractors, MEP Contractors, Consultants, or Data Center clients will be an advantage.

Skills:

Quality Assurance, Assurance

Job type:

Internship

• Execute manual test cases and document test results clearly.
• Identify, reproduce, and report bugs with detailed steps and supporting information.
• Support regression, functional, integration, and user acceptance testing.
• Collaborate with developers, product managers, and other team members to understand requirements and ensure product quality.
• Assist in creating and maintaining test cases, test scenarios, and QA documentation.
• Support basic test automation activities and learn QA tools and frameworks under guidance.
• Perform exploratory testing to identify potential usability, functionality, and performance issues.
• Participate in reviewing product requirements and provide feedback from a quality perspective.
• Contribute to continuous improvement of QA processes and testing practices.
• Native Thai speaker.
• Duration: Minimum 3 months, up to 6 months.
• Currently pursuing or recently graduated in Computer Science, Software Engineering, Information Technology, Engineering, or a related field.
• Basic understanding of software development and the Software Development Life Cycle (SDLC).
• Basic knowledge of software testing concepts and methodologies.
• Familiarity with programming languages such as Python, JavaScript, Java, or similar is a plus.
• Familiarity with tools such as Postman, Jira, Git, or any test automation framework is a plus.
• Strong attention to detail and an ability to identify inconsistencies or potential issues.
• Analytical and problem-solving mindset.
• Good communication and teamwork skills.
• Willingness to learn, ask questions, and work in a fast-paced technology environment.
• Passionate about software quality and building reliable products.
• Perks & Benefits.
• Paid internship with monthly allowance.
• Certificate or recommendation letter upon completion.
• Free lunch during in-office weeks.
• Flexible hybrid work: mostly remote, 1 week/month in-office.
• Hands-on experience working with real-world software and AI-powered products.
• Mentorship from experienced QA engineers and technology professionals.
• Opportunity to learn testing tools, methodologies, and automation practices.
• Opportunity to contribute to impactful projects with potential for full-time employment.
• We thank all applicants for your interest. Please note that only shortlisted candidates will be contacted for further consideration.

Experience:

5 years required

Skills:

Software Development, Project Management, Recruitment, English

Job type:

Full-time

• Take part of the authoring and the update of performance data published in flight operations manuals (FCOM, FCTM, QRH, AFM, MMEL) upon STL requests.
• Manage aircraft configuration to ensure coverage of individual aircraft definition in relevant flight operations manuals.
• Answer to customer queries on aircraft performance subjects and performance operational software (Performance Engineer Program (PEP), FlySmart+ Performance Modules) upon STL requests.
• In charge of functional test for the new version of performance operational software (Performance Engineer Program (PEP), FlySmart+ Performance Modules).
• Provide Flight Operations training sessions on performance subjects for the whole Airbus fleet to the operators.
• Provide performance studies and analysis for support to Flight Operations Standards or Aircraft Design, upon STL requests.
• Provide aircraft performance calculation and performance data to the operators in the frame of Flight Operations Services.
• CORE JOB Requirement.
• Bachelor degree or Master degree in aeronautical engineering.
• At least 5 years of experience in airline operations or equivalent.
• Advanced level of communication skills in English.
• Operational aircraft performance knowledge.
• Familiar with an international and multifunctional environment.
• Project management knowledge.
• Coaching and Training skills.
• Presentation skills.
• Ability to organize and manage multiple priorities.
• Good customer service mindset.
• Good team player and able to work independently.
• This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth.
• Airbus Flight Operations Services Limited.
• Permanent.
• Professional.
• Customer Flight/Mission & Ops Support.
• By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
• Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.
• Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to [email protected].
• At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Experience:

3 years required

Skills:

Product Development, English, Thai

Job type:

Full-time

• We are seeking a.
• Lab Manager.
• to lead and oversee air conditioning testing and validation activities for new product development (NPD) programs.
• This role is responsible for ensuring testing accuracy, operational efficiency, and compliance with international standards, while providing strong leadership to drive lab performance and support timely product launches.
• Lead and manage day-to-day operations of the HVAC testing laboratory.
• Oversee testing of RES, IMS, LC, and VRF systems to ensure compliance with performance standards.
• Monitor and validate key parameters including temperature, pressure, airflow, refrigerant performance, and energy efficiency (COP/EER).
• Ensure all testing activities comply with company standards and international regulations.
• Supervise test setup, instrumentation calibration, and safety procedures.
• Ensure test equipment and benches are properly maintained and operational.
• Lead root cause analysis and corrective actions for performance deviations.
• Review product specifications, test procedures, and technical documentation.
• Prepare and review test reports for internal and external stakeholders.
• Collaborate with engineering, quality, and production teams to resolve issues.
• Support customer witness testing and validation activities.
• Ensure compliance with EHS (Environmental, Health & Safety) standards.
• Lead and develop team capability through training programs for engineers, technicians, and customers.
• Bachelor's degree in Mechanical, Electrical, or HVAC Engineering.
• 7-10+ years of experience in HVAC testing/laboratory environment.
• Minimum 3 years in supervisory or management role.
• Strong knowledge of air conditioning systems and testing methodologies.
• Experience with performance testing, instrumentation, and diagnostics.
• Ability to troubleshoot mechanical, electrical, and control system issues.
• Strong leadership and team management skills.
• Excellent coordination and stakeholder management capability.
• Ability to manage multiple projects in a fast-paced environment.
• Good command of English and Thai.
• Carrier is An Equal.
• Opportunity/Affirmative.
• Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this.
• link.

Experience:

5 years required

Skills:

Quality Assurance, Risk Management, Enthusiastic, Leadership Skill, Assurance

Job type:

Full-time

• Lead and manage a global team of Supplier Quality Engineers located across multiple sites.
• Establish organizational priorities, performance objectives, and development plans while fostering a culture of accountability, collaboration, and continuous improvement.
• Drive consistent implementation of global supplier quality standards and best practices.
• Supplier Quality & Commodity Management.
• Own the Supplier Quality strategy for Optical Commodities across all Lumentum business units.
• Ensure robust supplier qualification, performance monitoring, risk management, and continuous improvement programs.
• Incoming Quality Assurance (IQA).
• Provide leadership for Incoming Quality Assurance activities across manufacturing sites.
• Ensure effective incoming inspection processes that balance product quality, manufacturing efficiency, and supplier performance.
• Utilize quality data and supplier performance metrics to optimize inspection strategies and drive continuous improvement.
• Supplier Relationship Management.
• Serve as the primary quality representative for optical suppliers.
• Lead supplier communications, quality escalations, and executive-level engagements.
• Develop collaborative supplier partnerships focused on improving quality, reliability, delivery performance, and operational excellence.
• Cross-Functional Collaboration.
• Partner with Engineering, Manufacturing, Operations, Program Management, Supply Chain, Reliability, and Customer Quality to ensure supplier readiness and successful product execution.
• Support business growth by proactively identifying supplier risks and implementing effective mitigation strategies.
• Required.
• Bachelor's degree in Optical Engineering, Physics, Materials Science, or a related technical discipline.
• 10+ years of experience in Supplier Quality, Quality Engineering, or Manufacturing Quality within a high-technology manufacturing environment.
• Minimum 5 years of leadership experience managing engineering or quality organizations.
• Strong technical knowledge of optical components, photonics, fiber optics, lasers, or related optical technologies.
• Experience managing geographically distributed teams.
• Proven experience leading supplier quality initiatives and supplier development programs.
• Excellent communication and stakeholder management skills with experience working directly with strategic suppliers and executive leadership.
• Preferred.
• Master's degree in Engineering or related discipline.
• Experience supporting multiple product lines within a global manufacturing organization.
• Knowledge of semiconductor, photonics, precision optics, and advanced packaging manufacturing processes.
• Why Join Lumentum?.
• This is a highly visible leadership opportunity to shape the global quality strategy for one of Lumentum's most critical commodity areas. The role provides broad exposure across all Business Units while leading a global organization responsible for Supplier Quality Engineering, Incoming Quality Assurance, and strategic supplier engagement. The successful candidate will play a.
• key role.
• in developing talent, strengthening supplier partnerships, and driving quality excellence across Lumentum's worldwide supply chain.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Experience:

8 years required

Skills:

Statistical Analysis, Product Development, Project Management, Risk Management, Enthusiastic

Job type:

Full-time

• Serve as the Supplier Quality Engineer for Lumentum's Optical Components.
• Own the supplier quality strategy supporting the optical commodity technology roadmap across multiple Business Units.
• Provide supplier quality leadership throughout the complete product lifecycle, from technology development through sustaining production.
• Partner with Product Engineering, Component Engineering, and Commodity Management to influence supplier selection, manufacturing strategy, technology roadmaps, and supplier capability development.
• Support multiple concurrent NPI programs while balancing business priorities, supplier readiness, and manufacturing capacity.
• Supplier Quality & Supplier Development.
• Lead supplier qualification, manufacturing capability assessments, process audits, and supplier readiness evaluations for strategic optical component suppliers.
• Evaluate supplier manufacturing maturity, process capability, capacity, scalability, and operational excellence across diverse optical manufacturing technologies.
• Develop supplier improvement roadmaps focused on quality, yield, process capability, manufacturing robustness, and operational excellence.
• Identify supplier risks and develop mitigation strategies supporting business continuity, supply resiliency, and product quality.
• Drive Lean Manufacturing, Six Sigma, and continuous improvement initiatives with strategic suppliers.
• New Product Introduction (NPI).
• Partner with Product Development, Component Engineering, Manufacturing Engineering, and Program Management to ensure supplier readiness for new product introductions.
• Participate in Design Reviews, Design for Manufacturability (DFM), and Design for Excellence (DFX) activities with Engineering teams and suppliers.
• Lead supplier process qualification, First Article Inspection (FAI), process validation, and production readiness activities.
• Support production ramp, supplier transfers, manufacturing transfers, localization initiatives, and capacity expansion projects.
• Ensure suppliers consistently meet quality, reliability, manufacturability, and delivery requirements prior to production release.
• Engineering & Technical Leadership.
• Act as the primary technical quality interface between Lumentum and strategic optical component suppliers.
• Influence engineering and supplier decisions without direct authority through technical expertise and data-driven decision making.
• Lead supplier technical reviews, quality reviews, executive escalations, and corrective action activities.
• Drive supplier capability development across advanced optical manufacturing technologies, precision assembly processes, and automated manufacturing systems.
• Support Engineering organizations with supplier manufacturing expertise during technology development, product industrialization, and manufacturing transfers.
• Cross-Functional Collaboration.
• Work closely with Product Engineering, Component Engineering, Commodity Management, Global Sourcing, Manufacturing, Reliability Engineering, Operations, Program Management, and Customer Quality.
• Support supplier changes, value engineering initiatives, localization programs, and manufacturing optimization projects.
• Utilize supplier quality metrics, statistical analysis, and manufacturing data to improve supplier capability and product quality.
• Drive proactive supplier risk management, manufacturing readiness, and long-term supplier development throughout the product lifecycle.
• Required.
• Bachelor's degree in Optical Engineering, Physics, Materials Science, or a related engineering discipline.
• Minimum 8 years of experience in Supplier Quality Engineering, Manufacturing Quality, Product Quality, or Quality Engineering within a high-technology manufacturing environment.
• Technical understanding of optical component manufacturing technologies, including fiber optics, passive optical components, precision optics, optical assemblies, and photonic devices.
• Experience with optical manufacturing processes such as active alignment, passive alignment, laser welding, adhesive bonding, fiber polishing, precision machining, ceramic manufacturing, and optical metrology.
• Experience supporting supplier qualification, process validation, New Product Introduction (NPI), manufacturing transfer, and production ramp activities.
• Knowledge of supplier quality systems, statistical process control, process capability analysis, FMEA, Control Plans, Measurement System Analysis (MSA), and structured problem-solving methodologies.
• Excellent communication, organizational, project management, and leadership skills.
• Demonstrated ability to influence cross-functional technical decisions across engineering, manufacturing, sourcing, and supplier organizations.
• Willingness to travel domestically and internationally (approximately 20-30%).
• Why Join Lumentum?.
• At Lumentum, Supplier Quality Engineering is evolving into a strategic engineering organization that partners closely with Product Engineering, Component Engineering, and our global supply base to enable innovation and business growth.
• As the SQE for Optical Components, you will help shape supplier technology roadmaps, influence supplier selection, accelerate new product introductions, and develop the manufacturing capabilities required to deliver the next generation of AI networking, coherent optics, and advanced photonic solutions. Your work will directly impact the performance, scalability, reliability, and supply resilience of the technologies powering the world's most advanced communications infrastructure.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Skills:

Product Development, Product Design

Job type:

Full-time

• Under broad direction, provides expert product application recommendations, product performance optimization solutions, and post- well evaluations of product performance in complex drilling environments.
• Recognized as an expert for challenging drilling problems and provides technical and operational expertise to both external and internal customers to deliver effective technical solutions.
• Assists with, and trains less experienced team members on: developing and managing r ...
• Generates, and guides others on the creation of technical papers and performance profiles to capture lessons learned and share best practices.
• Requires an undergraduate degree in Science, Technology, Engineering and Math, or Business related discipline and a minimum of 5 years' relevant industry experience.
• Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.
• 123 Vibhavadi-Rangsit Rd., Jompol, Chatuchak, Bangko, Bangkok, 10900, Thailand.
• Job Details.
• Requisition Number: 211475.
• Experience Level: Experienced Hire.
• Job Family: Engineering/Science/Technology.
• Product Service Line: Drill Bits and Service.
• Full Time / Part Time: Full-time.
• Compensation Information.
• Compensation is competitive and commensurate with experience.

Skills:

Quality Assurance

Job type:

Full-time

• ควบคุมงาน Monitoring ระบบ Solar System ทุกโครงการ.
• วางแผนบำรุงรักษา ระบบ Solar System ประจำเดือน,ประปี.
• ควบคุมงาน บำรุงรักษาในเป็นไปตามแผน ควบคุมคุณภาพงาน PM ถูกต้องตามมาตราฐาน.
• จัดทำรายงานการบำรุงรักษาของแต่ละโครงการ ส่งมอบให้กับลูกค้า หรือ หน่วยงานอื่นที่เกี่ยวข้อง.
• ประสานงานหน่วยงานอื่นที่เกี่ยวข้องกับโครงการ เช่น ลูกค้า ผู้รับจ้าง.
• วิเคราะห์ หาสาเหตุของปัญหาและหาแนวทางวิธีการแก้ไข.
• จัดหาอะไหล่สำรอง กรณีชำรุดเพื่อเปลี่ยนทดแทน.
• จัดทำเอกสาร แจ้งเครมอุปกรณ์ ในกรณี ที่อุปกรณ์อยู่ระหว่างการรับประกัน.
• จัดทำรายงานรายได้ขายไฟฟ้า ( PPA ) ส่งสรุปหน่วยงานที่เกี่ยวข้อง เช่น การไฟฟ้าส่วนภูมิภาค.
• วุฒิการศึกษา ปริญญาตรี สาขาวิศวกรรมไฟฟ้า หรือสาขาที่เกี่ยวข้อง.
• มีประสบการณ์ในงานด้าน Solar EPC / Monitoring System / Energy Management อย่างน้อย 1 ปี.
• มีความเข้าใจระบบไฟฟ้าในโซลาร์ฟาร์มและสามารถอ่าน Code Alarm / Fault Code เพื่อวิเคราะห์ปัญหาได้.
• มีทักษะในการประสานงานและการสื่อสารได้ดี.
• ใช้โปรแกรม MS Office และโปรแกรม Monitoring ได้.
• หากมีประสบการณ์ตรงกับระบบ Monitoring จะได้รับการพิจารณาเป็นพิเศษ.
• ประกันอุบัติเหตุและประกันชีวิต.
• ประกันสุขภาพ.
• ตรวจสุขภาพประจำปี.
• กองทุนสำรองเลี้ยงชีพ.
• เงินช่วยเหลือกรณีต่างๆ (เงินช่วยเหลืองานศพ, ค่ามงคลสมรส, ค่ารับขวัญบุญแรกเกิด).
• โบนัส และปรับเงินเดือนประจำปี (ขึ้นอยู่กับผลประกอบการและผลการดำเนินงาน).
• สถานที่.
• 88 ซอยโยธินพัฒนา แขวงคลองจั่น เขตบางกะปิ กทม. 10240.
• เลียบทางด่วนเอกมัย-รามอินทรา, ซอยโยธินพัฒนา, สามารถเข้าทางซอยลาดพร้าว 87, 101 และซอยโพธิ์แก้ว หรือนวมินทร์ 111.

Skills:

Mechanical Engineering, Quality Assurance, Problem Solving, Product Design, Data Analysis, Architecture, Automation, Assembly

Job type:

Full-time

• At Lumilens we are building the critical photonics infrastructure that powers tomorrow's AI supercomputing. From chip-to-chip optical interconnects to scalable photonic engines, Lumilens is unlocking a new era of computing faster, cooler, and massively more efficient.
• We're a well-funded startup backed by Mayfield and led by veterans who've built and scaled some of the most transformative technologies in the industry. At Lumilens, we're developing high-speed photonics products purpose built to power the future of AI ...
• This isn't incremental innovation, it's a ground floor opportunity to rethink the optical layer from the silicon up. You'll work alongside a team of world class engineers solving some of the hardest challenges in scaling optical systems. Every line of code, every design decision, every breakthrough you help deliver will shape the infrastructure of tomorrow.
• If you're looking for mission, momentum, and the chance to make an outsized impact, jump on the rocket ship. We're just getting started.
• Position Overview.
• As a.
• Failure Analysis Engineer.
• at Lumilens, you will play a critical role in ensuring the reliability and performance of our advanced optical transceiver products. You'll lead the investigation of optical, electrical, and mechanical failures either from field deployments or production testing, using schematics, test equipment, and fault isolation techniques to identify root causes and drive corrective actions. Partnering closely with R&D, supplier quality, and production teams, you'll document findings, assess field risks, and communicate insights that directly influence product design and manufacturing improvements. This role also involves developing new test infrastructure, writing automation scripts for customer switches, and occasionally engaging directly with customers on technical inquiries. It's a highly collaborative, hands-on position at the intersection of engineering, quality, and innovation. This role is ideal for someone passionate about problem solving and driving continuous improvement in cutting edge optical technologies.
• Responsible for optical, mechanical and electrical analysis/troubleshooting of optical transceivers returned from field deployment or internal testing.
• Troubleshoot failures using schematics, test equipment, switches, fault isolation techniques, and Design of Experiments.
• Work with cross-functional teams, including supplier quality engineers, to determine the root cause(s) and appropriate improvement/corrective actions.
• Thorough documentation of all test and failure analysis results, including photographs, test data, and repair work.
• Interface with production databases to extract original shipment information, test data, and traceability information.
• Assess field risk based on understanding of failure modes and field data utilizing available reliability tools.
• Analyze and present periodic and timely updates on failure analysis progress and reliability estimates to R&D, corporate teams, and customers.
• Engage in discussion with customers and respond to direct technical inquiries.
• Bring-up new internal and external test infrastructure to validate failure signatures observed in customer environments.
• Develop test scripts to operate and report data from customer switches.
• Experience in datacenter architecture is a plus.
• Skills/Experience.
• Minimum 5 yr. experience of related experience. Experiences in transceiver module tests at 400G, 800G, 1.6T, etc., are preferred.
• BS/MS in physics, electrical/Mechanical engineering or other relevant field or equivalent experience.
• Extensive knowledge of and experience working with analog and digital circuits.
• Familiar with MSA and customer standards/requirements.
• Familiar with basic failure analysis techniques/methodologies.
• Strong device physics background.
• Fundamental understanding of OSA assembly and its periphery circuits.
• Knowledge of OSA assemblies, PCBA, and module manufacturing processes is an added advantage.
• Working knowledge of device characterization and its techniques.
• Strong data analysis skills.
• Excellent verbal and written communication skills.
• All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.
• Seniority Level.
• Not Applicable.
• Industry.
• Telecommunications.
• Employment Type.
• Full-time.
• Job Functions.
• Quality Assurance.
• Skills.
• Optical Fiber.
• Physics.
• Failure Analysis.
• Analytical Skills.
• Digital Circuit Design.
• Analog Semiconductors.
• Corrective Actions.
• Root Cause.
• Troubleshooting.
• Electronic Circuits.
• Applicant insights.
• Apply Starters.
• Total views.
• People who meet your title and location.
• Optimize.
• Recommended matches.
• Candidates based on your hiring activity.
• SARAVANAN GOPALAKRISHNAN.
• Third degree connection- 3rd.
• Senior Failure Analysis Engineer at Nexperia.
• Seremban, Negri Sembilan, Malaysia.
• Esmawi Sham Shamsul Bohari.
• Third degree connection- 3rd.
• Failure Analysis | Semiconductor Devices | Discrete | SiC | Power Intergrated Module | Invited Industry Speaker.
• Seremban, Negri Sembilan, Malaysia.
• Mohd Fakhrul Mohamad.
• Third degree connection- 3rd.
• Failure Analysis Engineer at Nexperia.
• Seremban, Negri Sembilan, Malaysia.

Skills:

Electrical Engineering, Statistical Analysis, Product Development, SEM

Job type:

Full-time

• Drive reliability execution for photonic components including Silicon Photonics ICs, lasers (DFB, CW lasers etc), and Optoelectronic SiPs used in high-speed optical networks.
• Partner with R&D and design engineering to provide early reliability input during the product development lifecycle.
• Define and execute qualification plans aligned with Telcordia/GR-468, JEDEC, and other relevant standards for telecom and datacom products.
• Conduct accelerated life testing (ALT), failure analysis, degradation modeling, and root cause investigations to guide design and process improvement.
• Collaborate closely with cross-functional teams including Photonics Design, Packaging, Manufacturing, Quality Engineering, Product Marketing and Supply Chain to ensure robust product development and transfer to production.
• Lead supplier qualification activities and implement supplier quality metrics for critical photonics components.
• Support supplier audits, assess factory capability, process controls, reliability models, and product roadmaps.
• Support the infrastructure to perform incoming component validation.
• Develop and maintain Design for Reliability (DfR) methodologies, including predictive modeling and statistical analysis.
• Prepare, present and document technical reviews, reliability reports, and risk assessments for internal and customer-facing engagements.
• Key.
• M.S. in Electrical Engineering, Photonics, Physics, Materials Science, or related field, or equivalent experience in photonics reliability engineering with direct exposure to Silicon Photonics, laser technologies, and optical transceivers.
• Strong background in photonics device physics, photonics packaging, and failure mechanisms.
• Demonstrated success supporting NPI programs and product qualification from concept through volume production.
• In-depth knowledge of relevant standards (GR-468, Telcordia, JEDEC, MIL-STD).
• Proficiency with reliability modeling, statistical analysis (e.g., Weibull, Arrhenius), and tools such as JMP, Minitab, or similar.
• Hands-on experience with reliability test systems (e.g., HTOL, HAST, T/H, TC), and FA tools (e.g., SEM, FIB, X-ray, spectroscopy).
• Effective communicator with the ability to influence cross-functional and supplier teams.
• Experience in a fast-paced, high-tech environment serving telecom/datacom markets.
• Experience in integrated photonics packaging and co-design (optical + electrical).
• Familiarity with wafer-level reliability and optical wafer probing.
• Prior experience on engagements with Tier-1 datacenter customers or hyperscalers.
• Why Join Us?.
• This is more than a job. It's a chance to get in on the ground floor of a well-funded company set to disrupt a multi-billion dollar market. You will have the autonomy to make a massive impact, the resources to execute your vision, and a significant stake in the company you help build.
• What we offer.
• Competitive salary commensurate with experience.
• Comprehensive benefits package including health insurance.
• Professional development opportunities and certification support.
• Access to cutting-edge technology and cloud platforms.
• Collaborative work environment with cross-functional teams.
• Lumilens is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, gender, identity, orientation, veteran status, disability, or any other legally protected status.
• Working conditions.
• This position is onsite.
• May require quarterly off-site meetings or travel.
• Regular use of a computer and other office equipment is necessary.
• Interaction with team members and external contacts is a regular part of the job.
• May require occasional overtime and flexibility in work hours to accommodate the executive's needs.

Skills:

Electronics, Automation

Job type:

Full-time

• Location: RD Center, Samutprakarn.
• Department: R&D - ICTBG/TISBU.

Skills:

Electronics

Job type:

Full-time

• Expatriates are welcome but have to had experiences related to the requirements (At least 7+years of experience).
• Opportunity to work in international environment.
• Career growth opportunity.
• Good command of spoken and written English.
• Perform circuit analysis, stability analysis, circuit simulation, component selection including technical documentation.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with mechanical engineer, FW engineer to ensure design success until reliably manufacturing.
• Bachelor Degree in Electrical Engineering with good circuit analysis skill or Master's Degree in power electronics industry.

Experience:

5 years required

Skills:

Electronics

Job type:

Full-time

• Perform circuit design, circuit simulation and analysis.
• Perform component selection and verification.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with other design teams and production line.
• Bachelor Degree in Electrical/Electronic Engineering with good circuit analysis skill or Master's degree in power electronics industry.
• 3-5 years of related experience.
• Strong background on electrical design and power electronic circuit design (high frequency design for power supply, PWB layout, Magnetic component design and Digital Control Systems).
• Understood EMC, EMI and Power line testing.
• Understood Safety requirement (ex. creepage and clearance distances for high voltage design).
• Have experience in Circuit/Control Simulation and Analysis Software (ex. PSIM, MATLAB, etc.).
• Verbal and written English communication skills.
• Able to communicate in Mandarin language will be advantage.
• Professional working attitude, high responsibility and good team work.

Skills:

Electronics, Automation

Job type:

Full-time

• Design automation machine and Equipment to support each BUs.
• Calculation project cost and create Bill of Material and Bill of Quotation.
• Management project schedule and follow up our project's responsibility report.
• Communicate with concern and follow through the automation machine target.
• Follow company policy of controlled procedure ISO9000, ISO14000 and Safety matters.
• Provide help on continuously improvement project, including standard automation design guideline.
• Who are we looking for?.
• Bachelor's Degree in Mechanical Engineer, Automation Engineer or Mechatronic Engineer.
• Job skills: Mechanical Design, Pneumatic design and project management skill.
• Experience related automation machine design or development.
• Computer expertise: SolidWorks, inventor, AutoCAD 3D and 2D Drawing.
• Excellent time management skills for working within established timelines and schedules.
• Communication skill in English and Chinese will be a plus.
• Must be passed Delta required test of interview.

Skills:

Electronics, Automation

Job type:

Full-time

• Perform magnetics design calculation and power loss analysis such as PFC choke, Transformer, Resonant inductor, EMI filter.
• Perform magnetics simulation in Finite Element Analysis Software such as FEMM, Ansys, Quickfield.
• Perform magnetics design for manufacturing.
• Coordinate with other R&D centers in different countries.
• Master's Degree in power electronics or machine design or experienced from related industry or PhD degree.
• Ability to troubleshoot and analyze technical problems in details.
• Able to use some simulation software, MathCAD or writing some script languages.
• Verbal and written communications skills.
• Professional working attitude, high responsibility and good teamwork.
• Strong background on magnetics design.
• Background on power electronics.

Skills:

Electronics, Automation

Job type:

Full-time

• Expatriates are welcome but have to had experiences related to the requirements (At least 5+years of experience).
• Opportunity to work in international environment.
• Career growth opportunity.
• Good command of spoken and written English.
• Perform circuit analysis, stability analysis, circuit simulation, component selection including technical documentation.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with mechanical engineer, FW engineer to ensure design success until reliably manufacturing.
• Bachelor Degree in Electrical Engineering with good circuit analysis skill or Master's Degree in power electronics industry.

Skills:

Electronics, Automation

Job type:

Full-time

• Bachelor's degree or above in Electronic Engineering, Electrical Engineering, Mechanical Engineering.
• Initiative, high responsibility and good teamwork.
• Professional working attitude, high responsibility and good teamwork, Eager to learn new things & technology: most important.
• Interest in R&D work and eager to be part of team to develop green technology for better world.
• Cooperate with Colleagues in Thailand factory and RD center in China.
• Utilize FMEA (DFMEA/PFMEA) to identify design and process defects and drive design optimization.
• Acquire structured logical analysis tools such as 5Why, Fishbone diagram, Is/Is Not (separation analysis), etc.
• Be capable of independently leading the 8D problem-solving process and promoting the thorough improvement of issues during the R&D and trial production stages.
• Have DOE (experimental design) awareness to verify key parameters and be able to conduct data analysis using SPC (statistical process control).Verbal and written communications skills in English, knowing Chinese is a plus.
• Able to travel oversees China.
• I. Quality Assurance during Design Phase.
• Participate in the design review of power modules to ensure that the design meets quality and reliability requirements.
• Promote design risk assessment (such as DFMEA), assist in identifying potential failure modes and formulating preventive measures.
• Review design output documents (such as specifications, BOM, drawings) to ensure clear quality requirements.
• II. New Product Introduction (NPI) Quality Management.
• Support quality monitoring and problem tracking during sample trial production and engineering verification (EVT/DVT/PVT) stages.
• Assist in developing process quality control points (such as Control Plan, SOP, QC tools).
• Promote quality risk assessment and improvement before mass production (such as yield analysis, DOE, process capability analysis).
• III. Handling and Improving Quality Issues.
• Lead the analysis and handling of quality issues during the R&D stage (such as test failures, customer complaints).
• Use quality tools (8D, 5 Whys, Ishikawa) for root cause analysis and drive improvements.
• Follow up on the implementation and effectiveness verification of improvement measures to prevent the recurrence of problems.
• IV. Quality Data Management and Reporting.
• Establish and maintain quality data (such as yield, failure rate, test pass rate), conduct trend analysis.
• Regularly produce quality reports to support R&D decisions and management review.
• Assist in establishing quality KPIs to drive the quality awareness and goal achievement of the R&D team.
• V. Quality System and Compliance Support.
• Ensure that the R&D process complies with quality management systems and safety regulations such as ISO, IATF, IEC.
• Support internal audits and customer audits, prepare relevant quality documents and technical explanations.
• Promote standardization of quality processes and continuous improvement (such as document management, process optimization).
• VI. Supplier Quality Collaboration.
• Participate in supplier selection and technical evaluation to ensure that their quality capabilities meet the requirements of power modules.
• Assist suppliers in introducing quality standards and monitor their incoming material quality performance.
• Handle supplier quality issues and drive improvements and verification.

Skills:

Electronics, Automation

Job type:

Full-time

• Materials structure design, custom parts specification define, product assembly define and advice, thermal & acoustic noise plan for telecom, server and networking product.
• To support all mechanical related activities, including mechanical design, mechanical design verification tests, reliability engineering test support, design review meeting, customer conference call, factory DFM and supplier DFM review and factory build support.
• Basic structure analysis and verify.
• Product reliability failure mode root cause analysis and solutions.
• Cross function communicates, guideline define, maintain and achieve.
• Create BOM, specification for control the assembly.
• Design for cost optimization.
• Bachelor/Master Degree in Mechanical.
• 5-10 years of related experience in related fields.
• Expatriates are welcome but have to had experiences related to the requirements (At least 5+years of experience).

Experience:

2 years required

Skills:

Electronics, Automation

Job type:

Full-time

• Junior Failure Analysis (FA) Engineer.
• Bachelor's Degree in Power Electronics and Electronics Engineering or related field.
• 2-3 years of experience in electronic engineering, product testing, debugging, or failure analysis.
• Experience in power electronics domain is a plus.
• Basic knowledge of power converter circuits, semiconductor devices, and electronic components.
• Hands-on experience with laboratory equipment such as oscilloscope, multimeter, and electronic load.
• Strong willingness to learn failure analysis methodologies and troubleshooting skills.
• Senior Failure Analysis (FA) Engineer.
• Bachelor's degree in electrical / Electronics Engineering or related field.
• 4-5+ years of experience in failure analysis or electronic engineering field.
• Solid experience in power electronics domain such as AC/DC, DC/DC converters, SMPS is strongly preferred.
• Strong capability in root cause analysis of electrical, thermal, and manufacturing-related failures.
• Proficient in advanced FA tools and techniques including waveform analysis, stress evaluation and thermal analysis.
• Ability to lead FA activities, mentor junior engineers, and communicate directly with customers.
• General.
• Requirements (Applicable to All Levels).
• Good analytical thinking and problem-solving skills.
• Clear verbal and written communication skills in English.
• Ability to work cross-functionally with design, manufacturing, quality, and customer teams.
• Professional working attitude, high responsibility, and strong teamwork.

Skills:

Product Development, Product Design

Job type:

Full-time

• Under broad direction, provides expert product application recommendations, product performance optimization solutions, and post- well evaluations of product performance in complex drilling environments.
• Recognized as an expert for challenging drilling problems and provides technical and operational expertise to both external and internal customers to deliver effective technical solutions.
• Assists with, and trains less experienced team members on: developing and managing r ...
• Generates, and guides others on the creation of technical papers and performance profiles to capture lessons learned and share best practices.
• Requires an undergraduate degree in Science, Technology, Engineering and Math, or Business related discipline and a minimum of 5 years' relevant industry experience.
• Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.
• 123 Vibhavadi-Rangsit Rd., Jompol, Chatuchak, Bangko, Bangkok, 10900, Thailand.
• Job Details.
• Requisition Number: 211475.
• Experience Level: Experienced Hire.
• Job Family: Engineering/Science/Technology.
• Product Service Line: Drill Bits and Service.
• Full Time / Part Time: Full-time.
• Compensation Information.
• Compensation is competitive and commensurate with experience.