Filter Jobs

Job type:

Full-time

• สำเร็จการศึกษาระดับปริญญาตรี คณะวิศวกรรมศาสตร์ สาขาวิศวกรรมโยธา.
• มีประสบการณ์ทำงาน 0-3 ปี.
• มีใบอนุญาตประกอบวิชาชีพวิศวกรรมควบคุม สาขาวิศวกรรมโยธา ระดับภาคีวิศวกร (ภย.).
• สามารถขับรถยนต์และมีใบขับขี่รถยนต์.
• สามารถเดินทางไปปฏิบัติงานต่างจังหวัดได้ทั้งระยะสั้นและระยะยาว.
• หากสามารถใช้โปรแกรมวิเคราะห์โครงสร้างได้ จะได้รับการพิจารณาเป็นพิเศษ.

Experience:

3 years required

Skills:

Mechanical Engineering, Procurement, CAD

Job type:

Full-time

• Bangkok, Bangkok, Thailand.
• Eco Plant Services Co., Ltd.
• Apply for Position.
• Or refer someone.
• Job Openings.
• Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• VSPP Power Plant & Renewable field.
• Fuel MSW & Industrial Waste Power Plant is a special consideration.
• EPC Business Turnkey (Engineering, Procurement and Construction).
• Satisfy Owner.
• Requirements based on Design, Regulations, Laws, Standards, Codes and advise customer solutions.
• Provide design for safe operation & maintenance with recommended solutions to owner.
• Familiar with the process of related permits: EIA, EHIA, COP, Construction Permit, Factory License requirements, PEA, and ERC.
• Prepare Tendering, Bidding, and Proposal in terms of Technical Data & support for Mechanical Process, Boiler, Ash Handling System, Steam Turbine, Air-Cooled/Water-Cooled Condenser, Air Compressor, Fuel Feeding System, Flue Gas Treatment System, Water Treatment Plant according to TOR.
• Clarify requirements and follow up on, or clear, pending issues and lists via Piping Specifications & Routes, Equipment General Arrangement (GA), P&ID as mechanical integration with other systems such as Tie-in or Terminal Points.
• Verify and cross-check Heat and Mass Balance, Firing Diagram of Combustion, Water Balance, Utility Consumption in Mechanical field.
• Raise any mechanical concern or critical issue to team, if any, for consultation and resolution with team decision-makers, such as deviations from TOR, high impacts to cost, improper design, unsafe operation, or mismatches with other systems.
• Maintain close contact with Owners, Suppliers, Contractors, Vendors, and internal departments for implementation and rectification of related issues.
• Bachelor's Degree in Mechanical Engineering.
• At least 3-5 years of experience in Power Plant Design is preferred.
• Proficient in CAD software and Drawing Viewer applications.
• Understand the basic overall process of a Power Plant.
• Basic knowledge of rotating machinery such as Boiler Feed Water Pumps, Fans, Valve Types, Piping, Pressure Parts, ASME, ASTM, ANSI, JIS, DIN, GB, and EN.
• Commissioning and testing of machinery and piping such as Pressure Test, Cleaning, Leak Test in Water, Air, Chemical, etc.
• Basic knowledge of Operation & Maintenance in Power Plants, Consumption & Consumables for running Power Plants, Discharge Ash Treatment, Flue Gas Emission Control, Water Regulations.
• Communication skills with the ability to quickly summarize key points.
• Coordination with Suppliers, Owners, Contractors, Team Members, and internal departments.
• Apply for Position.
• Or refer someone.
• Share.
• Facebook.
• Line.
• LinkedIn.
• X (Formerly Twitter).
• Whatsapp.
• Email.

Skills:

AutoCAD

Job type:

Full-time

• ออกแบบและประเมินราคางาน Solar.
• เขียนแบบ Solar.
• Project Coordinator จนโครงการสำเร็จ.
• ปริญญาตรีสาขาวิศวกรรมไฟฟ้า.
• ประสบการณ์การออกแบบ หรือ เขียนแบบ 1-2 ปี หากเคยเป็น Solar Design จะพิจารณาเป็นพิเศษ.
• สามารถใช้โปรแกรม Autocad / PVsyst สำหรับงานออกแบบ.
• สามารถเดินทางไปปฏิบัติงานต่างจังหวัดได้.

Skills:

Mechanical Engineering

Job type:

Full-time

• Taking responsibility for delivery of projects from initial design, through to construction and final review.
• Be the point of contact for the client team on day-to-day project matters.
• Lead a large project design team, oversee and coordinate the work of a team multi-disciplinary engineers, designers and drafters. Engineering disciplines to be managed and coordinated include mechanical and electrical, civil, structural, security, architectural and ICT.
• Working in collaboration with other design disciplines, locally and regionally to ensure the integrity of the overall design.
• Lead the multi-disciplinary team in the production of design documentations including detailed design drawings, specifications, design report, calculations, BIM models, and other technical documents.
• Chair internal and external design meetings.
• Managing projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications.
• Assisting in workload management and resource forecasting and involved in preparation of proposal documentation.
• Reviewing and ensuring compliance, including drawings, reports, specifications, survey, access, and preparation of appraisals.
• Building and maintaining effective relationships with clients, recognizing, and developing potential business opportunities.
• Applying an understanding of construction/engineering project management principles to plan and deliver infrastructure projects of varying complexity.
• Managing work programmes to ensure that they are delivered to client expectations, timeframes and specifications.
• Engaging with multiple stakeholders and managing competing priorities.
• Supporting multiple concurrent projects across the entire life cycle, including planning, design verification, tendering, contract administration, financial management, project scheduling and risk management.
• We know today's complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.
• What can you bring to the team?.
• A Bachelor's Degree in Mechanical Engineering, with at least 7 years' relevant experience in Buildings Mechanical Design, installation and testing and commissioning, and leading delivery of multi-disciplinary projects in modern commercial and industrial buildings. Data Centre Experience will be preferred.
• Strong project management skills with ability to lead a large project team on technical delivery.
• Excellent presentation, verbal, and written communication skills.
• Sufficient experience to demonstrate intermediate to advanced knowledge of relevant engineering codes, standards, and practices.
• Organized approach and ability to accept increased responsibility and produce accurate and detailed work.
• High level of computer literacy and exposure to BIM / Revit will be highly desired, with advanced problem-solving skills through investigation and analysis.
• Literacy in the use of digital tools such as Autodesk Construction Cloud, Autodesk Naviswork, BIM360 and drive BIM processes.
• Strong ability in navigating 3D BIM model to review multi-disciplinary design, identify issues, provide solutions and delegate the design team to resolve them.
• Our Aurecon Attributes define our way of being - they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don't expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here.
• We value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?.
• About Us.
• Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.
• Over the last 85 years, our team of more than 7,800 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world's most complex challenges.
• In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking - an approach that is guided by digital engineering, the user experience and sustainability - ensuring that the work we do is future ready and leaves a legacy for the next generation.
• Think engineering. Think again.

Experience:

5 years required

Skills:

Electronics, Matlab, English

Job type:

Full-time

• Perform circuit design, circuit simulation and analysis.
• Perform component selection and verification.
• Troubleshoot power converter, Reliability validation including technical documentation.
• Collaborate with other design teams and production line.
• Bachelor Degree in Electrical/Electronic Engineering with good circuit analysis skill or Master's degree in power electronics industry.
• 3-5 years of related experience.
• Strong background on electrical design and power electronic circuit design (high frequency design for power supply, PWB layout, Magnetic component design and Digital Control Systems).
• Understood EMC, EMI and Power line testing.
• Understood Safety requirement (ex. creepage and clearance distances for high voltage design).
• Have experience in Circuit/Control Simulation and Analysis Software (ex. PSIM, MATLAB, etc.).
• Verbal and written English communication skills.
• Able to communicate in Mandarin language will be advantage.
• Professional working attitude, high responsibility and good team work.

Experience:

5 years required

Skills:

Mechanical Engineering, Chemical Engineering, Project Management, Quality Assurance, Industry trends

Job type:

Full-time

• Design and develop food processing systems, equipment, and processes that comply with industry standards and regulatory requirements.
• Conduct feasibility studies and technical assessments for new food engineering projects and process improvements.
• Prepare detailed engineering drawings, specifications, and technical documentation for manufacturing and installation.
• Collaborate with cross-functional teams including production, quality assurance, and project management to ensure successful project delivery.
• Optimise existing processes to improve efficiency, reduce costs, and enhance product quality.
• Perform calculations and simulations to validate design concepts and ensure operational safety and performance.
• Conduct or supervise testing and commissioning of food processing equipment and systems.
• Provide technical guidance and mentoring to junior engineers and design teams.
• Liaise with suppliers, vendors, and contractors to ensure quality standards and timely delivery of components and services.
• Ensure compliance with food safety regulations, health and safety standards, and environmental requirements.
• What we're looking for.
• Bachelor's degree in Food Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline.
• Minimum 3-5 years of professional experience in food engineering, process engineering, or related field.
• Proven expertise in food processing system design, process optimisation, and equipment selection.
• Strong knowledge of food safety standards, regulations (such as HACCP, GMP), and industry best practices.
• Proficiency in computer-aided design (CAD) software and engineering simulation tools.
• Excellent problem-solving skills and the ability to make sound technical decisions under pressure.
• Strong project management and organisational skills with the ability to manage multiple projects simultaneously.
• Effective communication and interpersonal skills, with the ability to work collaboratively across teams.
• Leadership experience and proven ability to mentor and develop junior team members.
• Familiarity with food industry equipment, technologies, and manufacturing processes is highly desirable.
• Professional registration or membership with engineering bodies is advantageous.
• What we offer.
• We are committed to providing our employees with a competitive and rewarding package. We offer opportunities for professional development and career advancement, allowing you to grow your skills and expertise in a supportive environment. Our hybrid work arrangement provides flexibility in how and where you work, promoting a healthy work-life balance. We provide a comprehensive benefits package including competitive salary, health and wellness initiatives, and employee support programmes. We foster an inclusive workplace culture where diversity is valued and all employees are empowered to contribute their best work. We invest in continuous learning and development opportunities to help you advance your career and stay at the forefront of industry trends and technologies.
• If you are a talented Senior Design Engineer with a passion for food engineering and process optimisation, we would like to hear from you. Please submit your CV, a cover letter outlining your relevant experience, and any portfolio or project examples that demonstrate your expertise. Join us at Patkol Public Company Limited and make a meaningful contribution to our engineering excellence and innovation.

Skills:

Good Communication Skills, Electrical Engineering, Automation, English

Job type:

Full-time

• Career Progression - Start your career adventure and build strong technical and problem-solving skills that open doors to multiple career paths within a global industrial leader.
• Wellbeing and Inclusion - At Michelin Thailand, experience a supportive and inclusive culture that values collaboration, continuous improvement, and individual contribution.
• A Global Brand - Join a world-class organization committed to quality, safety, innov ...
• About the Department.
• At the Engineering Department, we aim to design, deliver, and deploy automation solutions that improve performance, efficiency, safety, and competitiveness across manufacturing operations.
• Provide automation equipment and technical solutions to achieve project objectives with optimal performance and cost efficiency, in line with company standards.
• Lead feasibility studies and pre-study phases to identify and define the most effective technical solutions.
• Manage automation design and system integration, applying best practices and complying with internal and external standards.
• Ensure proper technical documentation and knowledge capitalization throughout the project lifecycle.
• Oversee project execution, including realization, installation, and commissioning of automation systems.
• Collaborate closely with cross-functional teams, including production, maintenance, IT/OT, suppliers, and external partners.
• Looking For.
• Required.
• Bachelor's or Master's Degree in Automation, Control, Electrical Engineering, or related fields.
• Experience in Automation Design, System Integration, or Project Engineering (New graduates are welcome to apply).
• Strong understanding of industrial automation project lifecycle.
• Ability to manage multiple stakeholders and technical interfaces.
• Good communication skills in Thai and English.
• Preferred.
• Experience in PLC programming (Siemens, Allen-Bradley, or others).

Experience:

3 years required

Skills:

Industrial Engineering, Electrical Engineering, Project Management, Cost Estimation, Electronics, SketchUp, AutoCAD, English, Thai

Job type:

Full-time

• Coordinate and prepare for project site surveys, including assigning personnel, scheduling appointments with clients, and preparing the required equipment and tools.
• Review the accuracy and completeness of site survey information and documentation together with the design team for project design purposes.
• Perform project calculations and design activities together with the design team using relevant software, including preparing preliminary project drawings and utilizing simulation/design programs such as.
• Helio, PVSyst, and SketchUp.
• Prepare project cost estimates and.
• Bill of Quantities (BOQ)., determine unit costs, summarize cost estimation information for relevant parties, and prepare material and equipment specifications for the PV Solar System.
• Prepare project proposal documents and oversee the accuracy and completeness of proposal documents, including required approvals, signatures, and supporting information for project pricing negotiations with clients.
• Coordinate with relevant individuals, departments, internal and external parties, and clients. Handover completed project information to the.
• Project Management (PM) Department.
• for further project installation activities.
• Coordinate design-related matters, including design review and certification, and prepare drawings and supporting documents for submission to relevant authorities for permits and approvals.
• Bachelor's degree in.
• Engineering, Industrial.
• Education, Industrial Engineering, Electrical Engineering, Electronics Engineering., or a related field.
• Minimum.
• 3 years of experience in photovoltaic (PV) solar power generation systems.
• Experience in preparing and maintaining project documentation, data collection, and technical/project drawings.
• Good verbal and written communication skills with.
• basic English proficiency.
• Good interpersonal and communication skills with clients, project teams, contractors, and colleagues.
• Ability to manage emotions, work effectively under pressure, and handle challenging situations professionally.
• Proficient in project design and engineering software, such as.
• MS Office, AutoCAD, Helio, PVsyst, and SketchUp.
• Valid driving license and ability to drive.

Experience:

5 years required

Skills:

Project Management, SAP, English

Job type:

Full-time

• Designs, develops both circuit and PCB for Air-conditioner products.
• Must achieve cost target, project objectives and meet each development period.
• Create BOM and make prototype to follow spec in product plaining.
• Coordinate with concern sections for making trial units and testing.
• Test items according to standard, fix problem make test report.
• Issue drawing and manual for supporting mass production.
• Bachelor of Engineering; Electronic or related.
• 5+ years of PCB design or circuit design.
• Operate an oscilloscope and other electrical tools.
• SAP operation system for Bill of Material.
• Understand EMI and electrical safety standards.
• Good project management skill and work under time limited.
• Strong analysis and problem-solving skills.
• Good command of English.
• Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this link to read the Job Applicant's Privacy Notice.

Experience:

2 years required

Skills:

Mechanical Engineering, Product Development, Teamwork

Job type:

Full-time

• Design and develop refrigeration, air conditioner, and heat pump systems.
• Perform system cycle analysis and optimize product performance.
• Develop and define functional specifications and control logic.
• Conduct laboratory testing, performance evaluation, and reliability verification.
• Analyze test results and implement design improvements.
• Verify and validate parts, components, and system compatibility.
• Work closely with cross-functional teams to support new product development and commercialization.
• Why This Role Matters.
• Contribute to a strategic project that drives approximately 40% of the company's sales volume.
• Play a key role in one of the company's major growth initiatives.
• Gain hands-on experience with innovative HVAC and heat pump technologies in a global engineering environment.
• Bachelor's Degree in Mechanical Engineering or a related field.
• 0-2 years of experience in engineering, product development, testing, or system design.
• Fresh graduates are welcome to apply.
• Basic knowledge of thermodynamics, heat transfer, refrigeration, or air conditioning systems is an advantage.
• Strong analytical and problem-solving skills.
• Good communication and teamwork abilities.
• Ability to work in a laboratory and testing environment.
• Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this link to read the Job Applicant's Privacy Notice.

Skills:

Project Management, Electronics, SAP, English

Job type:

Full-time

• Design and develop electronic circuits and PCB layouts for air conditioner products.
• Manage product development to meet project timelines, objectives, and cost targets.
• Create and maintain BOMs in SAP and develop product prototypes.
• Coordinate with cross-functional teams for trial builds and product testing.
• Conduct testing, analyze results, troubleshoot issues, and prepare test reports.
• Issue technical drawings, documentation, and manuals to support mass production.
• Bachelor's Degree in Electronic Engineering, Industrial Technology (Electronics), or related field.
• Experience in PCB design and/or electronic circuit design.
• Hands-on experience with oscilloscopes and electrical measurement tools.
• Knowledge of SAP BOM management.
• Understanding of EMI/EMC and electrical safety standards.
• Strong project management, analytical, and problem-solving skills.
• Good command of English.
• Preferred.
• Experience in consumer electronics, home appliances, or air conditioner product development.
• Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this link to read the Job Applicant's Privacy Notice.

Skills:

Electrical Engineering, Mechanical Engineering, SOLIDWORKS

Job type:

Full-time

• Design structural components and prepare structural drawings for air conditioner outdoor units.
• Conduct testing and analysis related to the structural aspects of outdoor units.
• Creating BOM (Bill of Materials) for production use.
• Design outdoor unit structures in accordance with customer requirements and international standards.
• Ensure that outdoor unit structures meet required standards through testing and verification.
• Troubleshoot and resolve issues arising from design and analysis.
• Minimum.
• Bachelor's degree in mechanical engineering, Electrical Engineering, or a related field.
• Ability to create 2D and 3D drawings using SolidWorks.
• Experience with air conditioning systems (refrigerant cycle, piping, and related components).
• Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this link to read the Job Applicant's Privacy Notice.

Skills:

Electrical Engineering, English

Job type:

Full-time

• Perform CFD and FEA software for product and system analysis.
• Perform company's simulation tools.
• Conduct air conditioner testing & analyze results.
• Generate ideas for cost reduction/Innovation.
• Collaborate with global cross-functional teams to achieve project goals.
• Minimum.
• Experienced in CFD or FEA simulation software at least 3years.
• Good command of spoken and written in English.
• Experienced in working with air conditioners.
• Computer skill (3D, Simulation software).
• Bachelor degree in Mechanical, Industrial, Electrical Engineering or related.
• Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this link to read the Job Applicant's Privacy Notice.

Skills:

AutoDesk, AutoCAD, Revit, English

Job type:

Full-time

• Review project customer specifications.
• Prepare piping isometrics and itemized bill of materials.
• Communicate with other departments within the organization.
• Develop and maintain 3D models.
• Participate in internal and customer 3D model walk-throughs.
• Provide thorough checking of drawings and bill of materials.
• Assist with the review of vendor and subcontractor generated drawings.
• Review vendor equipment drawings for incorporation into piping systems (e.g. valves, instruments, pumps, etc.).
• Review and respond to fabrication shop and field questions.
• Create project as-built drawings, if required.
• Maintain knowledge of current product designs, standards, and procedures.
• Travel to jobsite(s) for short field assignments as required.
• Identify/develop and use tools and techniques that improve the accuracy and/or efficiency of department and project work.
• Delegate and coordinate within piping design group and designated subcontractor.
• Office Location: MD Tower Bangna.
• We are only considering candidates who are local to the position location and already have the legal right to work in that country. Please note that the company does not provide visa sponsorship, work permit sponsorship, or relocation assistance for this position.
• Bachelor of Science in an engineering related field with an emphasis on statics, dynamics, and/or stress analysis is strongly preferred.
• Five (5) years similar piping design experience with a relevant college/university degree.
• In lieu of an engineering degree (10) years plus of similar piping design experience would be considered.
• Demonstrated excellent written, verbal, and interpersonal communication skills.
• Demonstrated excellent analytical and computer skills required.
• Ability to clearly communicate with English speaking co-workers, verbally and written.
• Familiarity with ASME codes and product application.
• Proficient in the use of 3D design software such as the AutoDesk Suite of products (e.g. AutoCAD, Plant 3D, Revit, Navisworks, and Vault).
• Proficiency with Microsoft Excel.
• Good communication in English.
• Office Location: MD Tower Bangna.
• Health Insurance Benefits including Major Medical, Outpatient, Clinical and Maternity coverage including spouse and children.
• Employee & Spouse &Kid Dental Benefits: 5000 THB/Year.
• Life Insurance.
• Travel Insurance while travelling on company business.
• Accidental Death and Dismemberment Benefits.
• Total Permanent and Disability Benefit.
• Paid Holidays.
• Ten days paid vacation.
• Provident Fund.
• Annual Heath Check up.
• Company Trip.
• Flexible working hour.
• Free parking lot.
• Overtime paid.

Experience:

5 years required

Skills:

Mechanical Engineering, Product Development, Microsoft Office, Product Design, Cost Analysis

Job type:

Full-time

• Conduct structural testing, analysis, and design validation.
• Support new product development and design improvement projects.
• Perform cost analysis and cost optimization activities.
• Collaborate with cross-functional teams to ensure product quality, performance, and manufacturability.
• Role Purpose.
• Develop indoor unit structural designs, including 3D modeling, drawing creation, testing, and evaluation.
• Deliver innovative and cost-effective designs that meet technical, quality, and manufacturing requirements.
• Bachelor's Degree in Mechanical Engineering or a related field.
• Fresh graduates to 5 years of experience in mechanical/product design.
• Experience in air-conditioner or appliance structural design is an advantage.
• Proficient in SolidWorks, AutoCAD, and Microsoft Office.
• Strong analytical and problem-solving skills.
• Fresh graduates are welcome to apply.
• Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
• Click on this link to read the Job Applicant's Privacy Notice.

Skills:

AutoCAD, Revit, AutoDesk, English

Job type:

Full-time

• Bangkok, Thailand.
• Full-time.
• Salary: unknown currency 40,000-75,000.
• Workplace: on_site.
• Department: Engineering.
• Babcock Power is looking for a dedicated, talented and detail-oriented Piping Designer to develop piping 3D models, ortho drawings, piping isometrics, and Material Take Offs for ASME pressure part piping on Heat Recovery Steam Generators (HRSGs).
• The selected candidate would work under the direction of the Piping Group Leader and Department Manager, and in parallel with the Project Design Lead and Engineering team to ensure routing is adequate for system stresses while satisfying company and project requirements.
• Review project customer specifications.
• Prepare piping isometrics and itemized bill of materials.
• Communicate with other departments within the organization.
• Develop and maintain 3D models.
• Participate in internal and customer 3D model walk-throughs.
• Provide thorough checking of drawings and bill of materials.
• Assist with the review of vendor and subcontractor generated drawings.
• Review vendor equipment drawings for incorporation into piping systems (e.g. valves, instruments, pumps, etc.).
• Review and respond to fabrication shop and field questions.
• Create project as-built drawings, if required.
• Maintain knowledge of current product designs, standards, and procedures.
• Travel to jobsite(s) for short field assignments as required.
• Identify/develop and use tools and techniques that improve the accuracy and/or efficiency of department and project work.
• Delegate and coordinate within piping design group and designated subcontractor.
• Office Location: MD Tower Bangna.
• This position is only open to local hires.
• Bachelor of Science in an engineering related field with an emphasis on statics, dynamics, and/or stress analysis is strongly preferred.
• Five (5) years similar piping design experience with a relevant college/university degree.
• In lieu of an engineering degree (10) years plus of similar piping design experience would be considered.
• Demonstrated excellent written, verbal, and interpersonal communication skills.
• Demonstrated excellent analytical and computer skills required.
• Ability to clearly communicate with English speaking co-workers, verbally and written.
• Familiarity with ASME codes and product application.
• Proficient in the use of 3D design software such as the AutoDesk Suite of products (e.g. AutoCAD, Plant 3D, Revit, Navisworks, and Vault).
• Proficiency with Microsoft Excel.
• Good communication in English.
• Office Location: MD Tower Bangna.
• Health Insurance Benefits including Major Medical, Outpatient, Clinical and Maternity coverage including spouse and children.
• Employee & Spouse &Kid Dental Benefits: 5000 THB/Year.
• Life Insurance.
• Travel Insurance while travelling on company business.
• Accidental Death and Dismemberment Benefits.
• Total Permanent and Disability Benefit.
• Paid Holidays.
• Ten days paid vacation.
• Provident Fund.
• Annual Heath Check up.
• Company Trip.
• Flexible working hour.
• Free parking lot.
• Overtime paid.
• Apply.
• Apply at Babcock Power Thailand Ltd.](https://apply.workable.com/babcock-power-thailand-ltd/j/817C3CE561/apply).

Experience:

3 years required

Skills:

Ability to travel upcountry, Electrical Engineering, Microsoft Office, Procurement, AutoCAD

Job type:

Full-time

• Calculate total electrical load requirements and analyze internal plant power generation needs (Auxiliary Power) for optimized efficiency.
• Perform and examine advanced power system simulations, including Load Flow, Short-Circuit Analysis, and Time-Current Coordination Studies (Relay Coordination) using specialized software to ensure selective tripping and overall system stability.
• Define and review comprehensive technical specifications and datasheets for major electrical power equipment, including Generators, Power Transformers, and High/Medium/ ...
• Create and review detailed Single Line Diagrams (SLD) and comprehensive protection/control schematics for both construction and plant operation phases.
• Develop and verify plant electrical layout designs, including Earthing & Grounding systems, Lightning Protection, Lighting systems, and Cable Routing/Trays.
• Prepare Bill of Quantities (BOQ) and technical documents for Request for Quotation (RFQ) packages to support the procurement team.
• Conduct technical evaluations of vendor proposals and supplier qualifications.
• Collaborate effectively with multi-disciplinary engineering teams and Project Managers to ensure turnkey project success.
• Bachelor's degree in Electrical Engineering (Power Engineering major).
• Holder of a valid Thai Professional Electrical Engineering License (กว.).
• 3-5 years of experience in power plant design, high-voltage electrical system engineering, or power system analysis.
• Proficient in electrical engineering software and simulation tools, specifically DIALux or Microsoft Office, alongside AutoCAD.
• Basic understanding of VSPP processes and related permit requirements (e.g., COP, EIA/EHIA, Construction Permit, Factory License).
• Solid knowledge of PEA / ERC Grid Codes and standard electrical codes/standards (EIT/วสท., IEC, IEEE, NEC).
• Soft Skills & Other.
• Strong communication and coordination skills with the ability to work effectively with suppliers, owners, and contractors under EPC project pressure.
• Good command of technical English (both spoken and written).
• Ability to travel upcountry or abroad for site inspections and project assignments when required.

Experience:

3 years required

Skills:

Product Development

Job type:

Full-time

• Lead and execute applied research and development projects, driving innovation and technological advancements.
• Collaborate with cross-functional teams to understand business needs and translate them into technical requirements.
• Design, develop, and test prototypes, ensuring they meet performance, reliability, and quality standards.
• Stay updated with industry trends and emerging technologies, identifying opportunities for improvement and innovation.
• Mentor and guide junior team members, fostering a culture of knowledge sharing and continuous learning.
• Document and present research findings, providing clear and concise reports to stakeholders.
• Ensure compliance with industry regulations and standards, maintaining a high level of ethical and professional conduct.
• Continuously seek opportunities for process improvement, streamlining workflows, and enhancing efficiency.
• A strong foundation in engineering principles and a passion for research and development.
• Demonstrated expertise in problem-solving and critical thinking, with the ability to approach challenges creatively.
• Excellent communication and collaboration skills, with a track record of working effectively in diverse teams.
• 3+ years of mechanical design experience in product development, validation, reliability, or manufacturing environments.
• Experience in leading and managing research projects, demonstrating the ability to deliver results.
• Proficiency in relevant software and tools for data analysis, simulation, and prototyping.
• A proactive and self-motivated mindset, with a drive to stay updated with industry advancements.
• A relevant engineering degree or equivalent professional experience.

Skills:

Product Design

Job type:

Full-time

• Bachelor or Master degree in electronics, electrical engineering or equivalent.
• 0- 10 years in Electronics, Power electronic and PCB Design.
• knowledge and experience in PCB design with Altium Designer (PCB schematics and routing layout).
• Ability to simulate Electronics circuit through Spice and design Electronics schematics.
• knowledge in Basic electronic, Power Electronics, Power converters and Electrical Engineering.
• knowledge of EMC, Safety and Power Electronics requirement for PCB design.
• Experience with International Standard requirements is a strong plus (IEC, EMC, Safety, Railway, etc.).
• Able to communicate in English.
• Proficient in using programs MS Office, Altium Designer, LT Spice, PSIM, Matlab, Autocad.
• New Product design and Validation.
• Design and prototypes new PCBA product and functional blocs (schematics, layout, routing and test).
• Support R&D team on firmware/hardware/mechanical integration.
• Test and debug sample, mock-up, prototype as per projects specifications.
• Product Life Cycle Management.
• Build full product documentation for manufacturing.
• Structure component database with PCB software for design and ERP system.
• Change Management.
• Search and survey new technology, development platform, improvement for future product.
• Welfare.
• Work 5 days, Monday - Friday, 8:30 a.m. - 5:30 p.m.
• Annual bonus (based on the operating results of that year).
• Regular salary adjustment.
• Food 600 baht/month.
• Group accident insurance.
• Life insurance.
• Welfare, financial assistance (wedding, ordination, child birth, child education, funeral).
• 6 days of business leave / year (can be exercised right from the start date as an employee but must be in the conditions specified by the company).
• Annual leave 8 days/year (Right can be exercised after passed probation and will be increased by 1 day per year, maximum 20 days/year).
• Company public Holiday 16 days/year.
• Provident funds (Condition).
• Health insurance (Condition).
• Asia Magnetic Winding Co., Ltd.
• 99/9 Moo 9 Bangchalong, Bangplee, Samutprakarn 10540.

Experience:

3 years required

Skills:

Project Management, English

Job type:

Full-time

• Design analog/mixed-signal building blocks (OpAmp, Bias circuit) and sub-system (Oscillator, EEPROM) of ICs especially in CMOS processes.
• Perform circuit and system design, simulation, and layout verification.
• Create technical document, for instance, design summary, design review presentation, and technology study conclusion.
• Create characterization plans of the responsible block or sub-system.
• Perform silicon validation on ASIC tester or in lab.
• Interact directly with other designers/chip architect to ensure the compatibility of his/her work with the overall system.
• Review of designs done by peers.
• Other assignments on technology study in topics related to electronic circuit and system and information technology.
• Who You Are.
• Educational.
• Bachelors or Master's degree in Electrical or Electronic Engineering.
• 0-3 years of experience in Analog IC design in the area of RFID, sensor interface, wireless/wireline communication, power management, RFIC, or equivalent.
• Knowledge of CMOS analog circuit design concepts, circuit & system modelling, and IC development process.
• Knowledge of signal processing, understanding of devices and process technology.
• Capability to justify the specifications of the block and the required time/resource for design.
• Capability on analog block design, layout floorplan, and characterization.
• Capability to design and analysis within Time / Resource constrain.
• Proficiency in the use of EDA tools for schematic capture, circuit simulation (SPICE) and layout design and verification.
• Innovative mindset to develop efficient and smart solutions.
• Excellent & Presentable command of English language or TOEIC score 500.
• Knowledge of digital IC design, IC testing/calibration, and manufacturing process.
• Knowledge of the related product application, measurement technique, and project management.
• send your resume to Email: [email protected].