Filter Jobs

Experience:

5 years required

Skills:

Mechanical Engineering

Job type:

Full-time

• The Inspection Engineer is responsible for performing third-party inspection, testing, and certification activities for lifting equipment and cranes, primarily within the oil and gas sector, ensuring compliance with applicable international standards, client specifications, and local regulatory requirements.
• Conduct inspection, testing, and certification of.
• Mobile cranes, offshore cranes, tower cranes.
• Lifting appliances, lifting gears, and accessories.
• Initial inspection.
• Periodic and annual inspections.
• Load testing and re-certification.
• Review engineering drawings, lifting plans, technical documents, and manufacturer data books (MDB).
• Applicable international standards (ISO, EN, ASME, API, etc.).
• Client specifications and project requirements.
• Bureau Veritas internal procedures and codes.
• Prepare accurate.
• inspection reports, certificates, and non-conformance reports (NCRs).
• in a timely manner.
• Liaise with clients, contractors, and site personnel to clarify technical issues and inspection findings.
• Identify unsafe conditions and recommend corrective actions to ensure personnel safety and asset integrity.
• Maintain professional conduct and uphold Bureau Veritas values, ethics, and impartiality at all times.
• Support audits, client meetings, and technical discussions when required.
• Education.
• Bachelor's degree in.
• Mechanical Engineering.
• or equivalent engineering discipline.
• Professional Certification.
• Mechanical Engineer License - Level 2.
• (mandatory).
• Experience.
• Minimum.
• 5 years of working experience in the Oil & Gas industry.
• At least.
• 5 years of hands-on experience in inspection.
• Lifting equipment.
• Cranes and lifting accessories.
• Prior experience working with third-party inspection agencies is an advantage.
• Technical Competencies.
• Strong knowledge of lifting equipment safety standards and regulations.
• Ability to interpret engineering drawings and technical documentation.
• Familiarity with inspection and testing techniques for cranes and lifting equipment.
• Good understanding of risk assessment and safe working practices.
• Skills & Attributes.
• Strong attention to detail and analytical skills.
• Excellent written and verbal communication skills.
• Ability to work independently and under minimal supervision.
• Willingness to travel to site locations and work in offshore/onshore environments.
• Proficient in MS Office and inspection reporting systems.
• Health, Safety & Environment (HSE).
• Committed to maintaining a high level of HSE awareness.
• Strict adherence to safety rules, procedures, and permit-to-work systems.

Experience:

5 years required

Skills:

Data Analysis, Purchasing, ISO 14001, ISO 9001, English, Thai

Job type:

Full-time

• Samut Prakan, Samut Prakan, Thailand.
• R0130201.
• HITACHI ENERGY (THAILAND) LIMITED.
• Quality Management.
• Full time.
• No.
• The Incoming Inspection Engineer Lead is responsible for leading all incoming material inspection activities for power transformer manufacturing. This role ensures that raw materials, components, and assemblies received from suppliers fully comply with technical specifications, international standards, and customer requirements. The position also provides technical leadership to inspection teams, supports supplier quality management, and prevents quality risks from entering production.
• You will lead, manage, provide technical guidance to Incoming Inspection Technicians, establish inspection planning, acceptance criteria, sampling strategies for incoming materials, review, approve inspection results, reports, and material release decisions, ensure incoming inspection activities meet project schedules and manufacturing needs.
• You will oversee inspection and acceptance of critical power transformer materials and components, including but not limited to: core materials (CRGO steel, amorphous metal cores), conductors (copper, aluminum, CTC, paper covered conductors), insulation materials (insulation paper, pressboard, spacers, gaskets), transformer oil (mineral or ester oil), bushings, tap changers, cooling components, structural steel and hardware and auxiliary components.
• You will ensure compliance with applicable international and customer standards (IEC, IEEE, ASTM, ISO), verify supplier documentation such as Certificates of Conformity (COC), test certificates, mill certificates, and inspection reports, maintain full traceability of incoming materials per transformer quality and regulatory requirements.
• You will lead identification, segregation, and disposition of non conforming materials, issue and manage Incoming NCRs and Supplier Corrective Action Requests (SCAR), support root cause analysis and verify effectiveness of corrective actions, coordinate with Purchasing, Engineering, Supplier Quality, and Production teams.
• You will develop, update, and improve Incoming Inspection SOPs, Control Plans, and Checklists, implement risk based inspection strategies and supplier performance monitoring, analyze incoming quality data and identify trends to reduce defects and rejections, support internal, customer, and third party audits, train and mentor Incoming Inspection Technicians on inspection techniques, standards, and safety, provide technical support during material related issues or supplier discussions.
• You will be responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines.
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.
• Bachelor's degree in engineering (Electrical, Mechanical, Materials, Industrial, or related field). Master's Degree is an advantage.
• Minimum 2 to 5 years of experience in Quality Engineering, Incoming Quality, or Supplier Quality.
• Direct experience in power transformer manufacturing or heavy electrical equipment is strongly preferred, strong knowledge of power transformer design, materials, and manufacturing processes, ability to interpret drawings, specifications, BOMs, and international standards (IEC / IEEE).
• Experience with inspection methods, sampling techniques, and metrology, hands on experience in NCR management, SCAR, CAPA, and root cause analysis (8D, 5 Why, Fishbone), sound understanding of quality management systems (ISO 9001 mandatory; ISO 14001 / ISO 45001 preferred), proficiency in data analysis, reporting, and quality systems.
• Strong leadership, coaching, and decision making ability, high integrity, attention to detail, and strong quality mindset and ability to handle priorities under project and production pressure, excellent cross functional communication and coordination skills.
• Good to excellent Thai and English proficiency (speaking, reading, and writing) for specifications, reports, and supplier communication.
• 1 month of guaranteed bonus (Fix bonus) plus Performance Bonus. (Depending on employee's performance result and Business performance).
• 10 days annual leave (Service year 0-5), 15 days annual leave (Service year 6-10), flexible working policy, Flexibility working time.
• Benefit according to local standards: Heath-care insurance benefits to employees and their dependents, annual health checkup, Provident Funds (employees can contribute up to 15%).
• Growth possibility: Learning and development platform, career movement opportunity within organization.
• Possibility to gain experience in international environment.
• Please be advised that the benefits provided may differ depending on the employee's country of hire.
• Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a.
• general inquiry form.
• on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.
• This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Experience:

5 years required

Skills:

Data Analysis, Purchasing, ISO 14001, ISO 9001, English, Thai

Job type:

Full-time

• You will lead, manage, provide technical guidance to Incoming Inspection Technicians, establish inspection planning, acceptance criteria, sampling strategies for incoming materials, review, approve inspection results, reports, and material release decisions, ensure incoming inspection activities meet project schedules and manufacturing needs.
• You will oversee inspection and acceptance of critical power transformer materials and components, including but not limited to: core materials (CRGO steel, amorphous m ...
• You will ensure compliance with applicable international and customer standards (IEC, IEEE, ASTM, ISO), verify supplier documentation such as Certificates of Conformity (COC), test certificates, mill certificates, and inspection reports, maintain full traceability of incoming materials per transformer quality and regulatory requirements.
• You will lead identification, segregation, and disposition of non conforming materials, issue and manage Incoming NCRs and Supplier Corrective Action Requests (SCAR), support root cause analysis and verify effectiveness of corrective actions, coordinate with Purchasing, Engineering, Supplier Quality, and Production teams.
• You will develop, update, and improve Incoming Inspection SOPs, Control Plans, and Checklists, implement risk based inspection strategies and supplier performance monitoring, analyze incoming quality data and identify trends to reduce defects and rejections, support internal, customer, and third party audits, train and mentor Incoming Inspection Technicians on inspection techniques, standards, and safety, provide technical support during material related issues or supplier discussions.
• You will be responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines.
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.
• Bachelor's degree in engineering (Electrical, Mechanical, Materials, Industrial, or related field). Master's Degree is an advantage.
• Minimum 2 to 5 years of experience in Quality Engineering, Incoming Quality, or Supplier Quality.
• Direct experience in power transformer manufacturing or heavy electrical equipment is strongly preferred, strong knowledge of power transformer design, materials, and manufacturing processes, ability to interpret drawings, specifications, BOMs, and international standards (IEC / IEEE).
• Experience with inspection methods, sampling techniques, and metrology, hands on experience in NCR management, SCAR, CAPA, and root cause analysis (8D, 5 Why, Fishbone), sound understanding of quality management systems (ISO 9001 mandatory; ISO 14001 / ISO 45001 preferred), proficiency in data analysis, reporting, and quality systems.
• Strong leadership, coaching, and decision making ability, high integrity, attention to detail, and strong quality mindset and ability to handle priorities under project and production pressure, excellent cross functional communication and coordination skills.
• Good to excellent Thai and English proficiency (speaking, reading, and writing) for specifications, reports, and supplier communication.
• 1 month of guaranteed bonus (Fix bonus) plus Performance Bonus. (Depending on employee's performance result and Business performance).
• 10 days annual leave (Service year 0-5), 15 days annual leave (Service year 6-10), flexible working policy, Flexibility working time.
• Benefit according to local standards: Heath-care insurance benefits to employees and their dependents, annual health checkup, Provident Funds (employees can contribute up to 15%).
• Growth possibility: Learning and development platform, career movement opportunity within organization.
• Possibility to gain experience in international environment.
• Please be advised that the benefits provided may differ depending on the employee's country of hire.
• Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.
• This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Experience:

3 years required

Skills:

Industrial Engineering, Amazon AWS, English

Job type:

Full-time

• Perform and coordinate inspection activities at manufacturers, fabrication yards, and project sites.
• Review inspection scopes, ITPs, drawings, specifications, material certificates, welding documents, NDT reports, and inspection records.
• Witness fabrication, welding, NDT, dimensional inspection, pressure testing, and other manufacturing activities.
• Verify compliance with applicable codes, standards, procedures, specifications, and client requirements.
• Prepare clear and professional inspection reports, technical findings, and project documentation in English.
• Coordinate with clients, manufacturers, subcontractors, project teams, and international TÜV NORD offices.
• Support technical clarification, quotation preparation, and inspection planning when required.
• Preferred Qualifications.
• Bachelor's degree in Mechanical, Welding, Materials, Industrial Engineering, or a related discipline.
• Minimum 3-5 years of experience in inspection, fabrication, welding, pressure equipment, QA/QC, or third-party inspection.
• Familiarity with international standards such as ASME, EN, ISO, API, AWS, or PED requirements.
• Welding inspection certification such as CSWIP 3.1, AWS CWI, IWI, or equivalent would be an advantage.
• NDT Level II certification would be an advantage.
• Good English communication and technical reporting skills.
• Good coordination, problem-solving, and interpersonal skills.
• Willing to travel within Thailand and overseas when required.
• Candidates holding a Professional Engineer or Senior Professional Engineer license issued by the Council of Engineers Thailand will be given special consideration.
• The position level will be determined based on the candidate's qualifications, relevant experience, technical competency, and professional engineering license.

Skills:

Network Infrastructure, VMware

Job type:

Full-time

• Fabrinet Co., Ltd. is seeking a talented.
• Network Engineer.
• to join our team in Chonburi. This is a.
• full-time position.
• based at our Chonburi facility. As a Network Engineer, you will play a crucial role in designing, implementing, and maintaining our network infrastructure to ensure seamless connectivity and optimal performance across our operations. This position is integral to supporting our business objectives and enabling our organisation to operate efficiently in an increasingly connected environment.
• What you'll be doing.
• Design, implement, and maintain network infrastructure including routers, switches, firewalls, and other networking equipment.
• Monitor network performance and troubleshoot connectivity issues to ensure minimal downtime.
• Configure and manage network security protocols and access controls to protect company data and systems.
• Perform regular network maintenance, upgrades, and patches to keep systems current and secure.
• Document network configurations, procedures, and changes for audit and compliance purposes.
• Collaborate with IT team members and other departments to support network-related requirements and projects.
• Provide technical support and guidance to end users on network connectivity and related issues.
• Monitor bandwidth usage and optimise network performance to support business operations.
• Implement backup and disaster recovery solutions to ensure business continuity.
• Stay updated with emerging networking technologies and best practices in the industry.
• What we're looking for.
• Bachelor's degree in Computer Science, Information Technology, Telecommunications, or a related field, or equivalent practical experience.
• Proven experience as a Network Engineer or in a similar network administration role.
• Strong knowledge of network protocols, TCP/IP, DNS, DHCP, VPN, and routing technologies.
• Experience with network monitoring and management tools such as Nagios, Zabbix, or similar platforms.
• Proficiency in configuring and managing enterprise-level networking equipment from major vendors such as Cisco, Juniper, or Huawei.
• Solid understanding of network security principles and firewalls.
• Knowledge of LAN and WAN technologies.
• Excellent problem-solving skills and the ability to work independently and as part of a team.
• Strong communication skills and the ability to explain technical concepts to non-technical stakeholders.
• Relevant certifications such as CCNA, CCNP, or CompTIA Network+ are highly desirable.
• Experience with cloud networking or software-defined networking (SDN) is a plus.
• What we offer.
• At Fabrinet Co., Ltd., we are committed to providing a supportive and rewarding workplace. We offer competitive compensation packages commensurate with experience and qualifications. Our benefits include comprehensive health and wellness programmes, opportunities for professional development and career advancement, and a collaborative work environment that fosters innovation and continuous learning. We believe in investing in our employees' growth and provide access to training programmes and industry certifications to support your career progression. We maintain a culture of respect, diversity, and inclusion, and we encourage all employees to contribute their unique perspectives and ideas.
• About us.
• Fabrinet Co., Ltd. is a leading provider of advanced optical and electromechanical services and solutions to the global telecommunications, internet datacenter, consumer electronics, and industrial markets. With a commitment to excellence, innovation, and customer satisfaction, we have established ourselves as a trusted partner for companies worldwide. Our state-of-the-art facilities in Thailand and beyond are equipped with cutting-edge technology and staffed by talented professionals dedicated to delivering high-quality products and services. We pride ourselves on our strong engineering capabilities, operational efficiency, and commitment to sustainable business practices. Our mission is to support our customers' success by providing reliable, innovative solutions that meet their evolving needs in an increasingly digital world.
• To apply, please submit your CV and a cover letter outlining your relevant experience and qualifications for this position. We look forward to hearing from you.

Job type:

Full-time

• ดูแลและให้บริการด้าน Surfacing Technology (เทคโนโลยีการพ่นพอกผิวโลหะ) แก่ลูกค้า เพื่อให้เป็นไปตามความต้องการและมาตรฐานของบริษัท.
• ขยายตลาดและพัฒนางานบริการ Surfacing Technology ไปยังกลุ่มอุตสาหกรรมเป้าหมาย.
• ค้นหาและพัฒนาฐานลูกค้ารายใหม่ พร้อมดูแลรักษาความสัมพันธ์กับลูกค้าเดิม และติดตามความคืบหน้าของโครงการอย่างต่อเนื่อง.
• นำเสนอสินค้าและบริการ พร้อมให้คำปรึกษาด้านเทคนิค เพื่อเสนอแนวทางแก้ไขปัญหาและตอบสนองความต้องการของลูกค้า.
• ประสานงานกับหน่วยงานที่เกี่ยวข้องทั้งภายในและภายนอกองค์กร เพื่อให้การดำเนินงานและการส่งมอบบริการเป็นไปอย่างมีประสิทธิภาพ.
• ดูแลและติดตามการให้บริการหลังการขาย เพื่อสร้างความพึงพอใจและความสัมพันธ์ที่ดีกับลูกค้า.
• จัดทำรายงานการเข้าพบลูกค้า รายงานการขาย และข้อมูลที่เกี่ยวข้องตามที่บริษัทกำหนด.
• ปฏิบัติงานอื่น ๆ ที่ได้รับมอบหมาย เพื่อสนับสนุนการดำเนินงานของฝ่ายและบริษัท.
• การศึกษาหรือประสบการณ์ด้านวิทยาศาสตร์,วิศวกรรมศาสตร์,สาขาวิศวกรรมเครื่องกล,วิศวกรรมยานยนต์,วิศวกรรมวัสดุ,วิศวกรรมวัสดุนาโน,สาขาวิศวกรรมเหมืองแร่,หรือสาขาอื่นๆที่เกี่ยวข้อง,หรือผู้ที่มีประสบการณ์งานขายที่เกี่ยวข้องกับงานพ่นพอกผิวแข็ง.
• มีมนุษยสัมพันธ์ที่ดี.
• มีความขยันอดทน.
• มีรถยนต์เป็นของตัวเอง.
• มีทักษะการขายและการเจรจา.
• สามารถใช้เครื่องมือวัดได้.
• มีประสบการณ์ทำงานขายมาก่อน.
• ทำงานภายใต้แรงกดดันได้ดี.
• กองทุนสำรองเลี้ยงชีพ.
• ประกันอุบัติเหตุ.
• ประรถบนต์ส่วนบุคล.
• คอมมิชชั่น.
• ค่าเบี้ยเลี้ยงต่างจังหวัด และต่างประเทศ.
• ทุนการศึกษาบุตร.
• ค่าที่พักทั้งในและนอกประเทศ.
• งานฌาปนกิจบุคคลในครอบครัว.
• วันหยุดประเพณี 16 วันต่อปี.
• ค่าน้ำมัน + ค่าเสื่อมรถยนต์.
• อื่นๆ อีกมากมายตามนโยบายบริษัท.
• สถานที่ปฎิบัติงาน.
• บริษัท แอ็คมี่ อินเตอร์เนชั่นแนล(ประเทศไทย) จำกัด.
• 630 ซอยอ่อนนุช 54 แขวงอ่อนนุช เขตสวนหลวง กรุงเทพมหานคร 10250.
• เมลล์สมัครงาน [email protected],[email protected].

Skills:

Electronics, Automation

Job type:

Full-time

The company, founded in 1988, is one of the leading producers in the world for power and thermal management solutions. Delta is also a major regional player in several product segments including industrial automation, displays, and networking. As an energy-saving solutions provider with core competencies in power electronics and innovative research and development, Delta's business categories include Power Electronics, Automation, and Infrastructure.

Skills:

Software Development, Product Development, Project Management, Industrial Design, Problem Solving, Recruitment, Negotiation, Accounting, Automation, Budgeting, Scrum

Job type:

Full-time

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• Summary.
• The Lead Engineer, Software develops, debugs, tests, deploys and supports code to be deployed in systems/products/equipment for various applications. They write, debug, maintain, and test software in various common languages and for software at various levels in the hierarchy (from Firmware to Application). Software creation follows an agreed to development process (such as Agile, Scrum, etc.) and complies with the product life cycle development (phase/gate deliverables).
• The Lead Engineer, Software works in cross functional teams with other designers, customers, manufacturing engineering and project leadership to ensure robust and high quality product development. Enhance designs with feedback from reviews in areas such as manufacturing, test, supply chain, reliability, industrial design and simulations.
• Detailed Description.
• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Analyze, design and develop tests and test-automation suites.
• Design and develop a processing platform using various configuration management technologies.
• Test software development methodology (may be done in agile environment).
• Provide ongoing maintenance, support and enhancements in existing systems and platforms.
• Collaborate cross-functionally with customers, users, project managers and other engineers including Peer-Reviews to achieve elegant solutions.
• Provide recommendations for continuous improvement.
• Work alongside other engineers on the team to elevate technology and consistently apply best practices.
• Keep up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage a single line engineering project with a limited number of participants. Create a project/change management plan, establish and distribute project roles, and communicate what is needed from the project participants in order to make the project successful.
• Leadership - Demonstrate "Individual Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning -Solid understanding of Celestica's budgeting and accounting system and the cost accounting practices relevant to engineering work. Always act with the awareness of your work's impact on financial results. Communicate clearly and timely all aspects of your work that may have an influence on the profitability of the project and/or what is necessary for proper accounting and controlling.
• The following competencies may also be required and performed with help or under supervision: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Typical Experience.
• 3 to 8 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Experience:

8 years required

Skills:

Statistical Analysis, Product Development, Project Management, Risk Management, Enthusiastic

Job type:

Full-time

• Serve as the Supplier Quality Engineer for Lumentum's Optical Components.
• Own the supplier quality strategy supporting the optical commodity technology roadmap across multiple Business Units.
• Provide supplier quality leadership throughout the complete product lifecycle, from technology development through sustaining production.
• Partner with Product Engineering, Component Engineering, and Commodity Management to influence supplier selection, manufacturing strategy, technology roadmaps, and supplier capability development.
• Support multiple concurrent NPI programs while balancing business priorities, supplier readiness, and manufacturing capacity.
• Supplier Quality & Supplier Development.
• Lead supplier qualification, manufacturing capability assessments, process audits, and supplier readiness evaluations for strategic optical component suppliers.
• Evaluate supplier manufacturing maturity, process capability, capacity, scalability, and operational excellence across diverse optical manufacturing technologies.
• Develop supplier improvement roadmaps focused on quality, yield, process capability, manufacturing robustness, and operational excellence.
• Identify supplier risks and develop mitigation strategies supporting business continuity, supply resiliency, and product quality.
• Drive Lean Manufacturing, Six Sigma, and continuous improvement initiatives with strategic suppliers.
• New Product Introduction (NPI).
• Partner with Product Development, Component Engineering, Manufacturing Engineering, and Program Management to ensure supplier readiness for new product introductions.
• Participate in Design Reviews, Design for Manufacturability (DFM), and Design for Excellence (DFX) activities with Engineering teams and suppliers.
• Lead supplier process qualification, First Article Inspection (FAI), process validation, and production readiness activities.
• Support production ramp, supplier transfers, manufacturing transfers, localization initiatives, and capacity expansion projects.
• Ensure suppliers consistently meet quality, reliability, manufacturability, and delivery requirements prior to production release.
• Engineering & Technical Leadership.
• Act as the primary technical quality interface between Lumentum and strategic optical component suppliers.
• Influence engineering and supplier decisions without direct authority through technical expertise and data-driven decision making.
• Lead supplier technical reviews, quality reviews, executive escalations, and corrective action activities.
• Drive supplier capability development across advanced optical manufacturing technologies, precision assembly processes, and automated manufacturing systems.
• Support Engineering organizations with supplier manufacturing expertise during technology development, product industrialization, and manufacturing transfers.
• Cross-Functional Collaboration.
• Work closely with Product Engineering, Component Engineering, Commodity Management, Global Sourcing, Manufacturing, Reliability Engineering, Operations, Program Management, and Customer Quality.
• Support supplier changes, value engineering initiatives, localization programs, and manufacturing optimization projects.
• Utilize supplier quality metrics, statistical analysis, and manufacturing data to improve supplier capability and product quality.
• Drive proactive supplier risk management, manufacturing readiness, and long-term supplier development throughout the product lifecycle.
• Bachelor's degree in Optical Engineering, Physics, Materials Science, or a related engineering discipline.
• Minimum 8 years of experience in Supplier Quality Engineering, Manufacturing Quality, Product Quality, or Quality Engineering within a high-technology manufacturing environment.
• Technical understanding of optical component manufacturing technologies, including fiber optics, passive optical components, precision optics, optical assemblies, and photonic devices.
• Experience with optical manufacturing processes such as active alignment, passive alignment, laser welding, adhesive bonding, fiber polishing, precision machining, ceramic manufacturing, and optical metrology.
• Experience supporting supplier qualification, process validation, New Product Introduction (NPI), manufacturing transfer, and production ramp activities.
• Knowledge of supplier quality systems, statistical process control, process capability analysis, FMEA, Control Plans, Measurement System Analysis (MSA), and structured problem-solving methodologies.
• Excellent communication, organizational, project management, and leadership skills.
• Demonstrated ability to influence cross-functional technical decisions across engineering, manufacturing, sourcing, and supplier organizations.
• Willingness to travel domestically and internationally (approximately 20-30%).
• Why Join Lumentum?.
• At Lumentum, Supplier Quality Engineering is evolving into a strategic engineering organization that partners closely with Product Engineering, Component Engineering, and our global supply base to enable innovation and business growth.
• As the SQE for Optical Components, you will help shape supplier technology roadmaps, influence supplier selection, accelerate new product introductions, and develop the manufacturing capabilities required to deliver the next generation of AI networking, coherent optics, and advanced photonic solutions. Your work will directly impact the performance, scalability, reliability, and supply resilience of the technologies powering the world's most advanced communications infrastructure.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Skills:

SAP

Job type:

Full-time

• Eligibility and details may vary according to work location, service year and conditions in each program/plan.
• Please note benefits may be changed from time to time without notice, subject to the direction and discretion of the Company and/or applicable law.

Skills:

Electronics

Job type:

Full-time

The company, founded in 1988, is one of the leading producers in the world for power and thermal management solutions. Delta is also a major regional player in several product segments including industrial automation, displays, and networking. As an energy-saving solutions provider with core competencies in power electronics and innovative research and development, Delta's business categories include Power Electronics, Automation, and Infrastructure.

Experience:

5 years required

Skills:

Data Analysis, Enthusiastic, Architecture, Electronics, Automation

Job type:

Full-time

• Serve as a forward deployed AI engineer embedded with the Bangkok manufacturing team to identify high-impact AI opportunities across process engineering, yield improvement, visual inspection, quality control, operations, and reporting workflows.
• Partner with manufacturing, process, yield, quality, and operations teams to understand workflows, pain points, data sources, and decision-making needs.
• Conduct deep operational assessments at manufacturing sites by observing workflows, interviewing frontline employees, supervisors, trainers, quality leaders, and operat ...
• Design, prototype, and productionize AI/ML solutions for manufacturing use cases, including visual inspection, defect classification, anomaly detection, predictive analytics, root-cause analysis, process optimization, and yield improvement.
• Translate business and manufacturing problems into technical solution designs, including data requirements, model approach, architecture, validation strategy, user interface needs, and deployment path.
• Work with structured and unstructured manufacturing data from databases, equipment logs, inspection systems, MES, yield systems, engineering reports, and other plant data sources.
• Communicate technical concepts clearly to both technical and non-technical stakeholders, including engineers, operators, managers, and senior leaders.
• Mentor local engineers and analysts on AI tools, data science methods, model interpretation, and practical AI adoption in manufacturing workflows.
• 5+ years of experience in data science, machine learning, AI engineering, manufacturing analytics, process engineering analytics, or a closely related technical field.
• Strong hands-on experience developing and deploying AI/ML models in real-world industrial or manufacturing environments.
• Practical experience using LLMs and generative AI tools for data analysis, workflow automation, knowledge retrieval, reporting, or engineering productivity applications.
• Strong programming skills in Python and common AI/ML frameworks such as PyTorch, TensorFlow, scikit-learn, OpenCV, and LangChain/LlamaIndex or similar frameworks.
• Experience working with relational databases and SQL, preferably including Oracle or other enterprise database systems.
• Ability to build end-to-end prototypes, including data extraction, model development, backend logic, simple user interfaces, dashboards, APIs, or workflow tools.
• Strong understanding of manufacturing data, process variation, yield analysis, quality systems, equipment data, inspection data, and root-cause analysis methods.
• English communication skills good enough to interact with US and Europe teams.
• Preferred Qualifications.
• Experience in semiconductor, photonics, electronics, optical components, precision manufacturing, or other high-volume advanced manufacturing environments.
• Experience with manufacturing systems such as MES, SPC, yield management systems, equipment automation systems, inspection platforms, or quality management systems.
• We are an equal opportunity employer and value diversity at our company.
• We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
• We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment.
• Please contact us to request accommodation.

Skills:

Product Development, Project Management, Automation, Python, CAD, C++

Job type:

Full-time

• Lead the design, development, and testing of advanced robotic systems and components.
• Collaborate with cross-functional teams to develop innovative solutions for automation and robotic applications.
• Manage and oversee multiple projects, ensuring timely completion and adherence to specifications.
• Coordinate with stakeholders to define project requirements, deliverables, and timelines.
• Provide technical guidance and mentorship to junior engineers and team members.
• Stay updated with the latest advancements in robotic technology and integrate relevant innovations into ongoing projects.
• Integrate robotic systems with other hardware and software components.
• Troubleshoot and resolve technical issues related to system integration and performance.
• Develop and implement testing protocols to ensure the reliability and performance of robotic systems.
• Analyze test results and optimize designs based on feedback and performance data.
• Prepare detailed technical documentation, including design specifications, test plans, and user manuals.
• Present project updates and technical findings to stakeholders and senior management.
• Ensure that all robotic systems comply with industry standards, safety regulations, and company policies.
• Conduct risk assessments and implement safety measures in the design and operation of robotic systems.
• Competencies.
• Education Description.
• Education (Max. 2 Major).
• Experience.
• Minimum of [X] years of experience in robotics engineering, with a focus on design and development.
• Knowledge.
• Experience with machine learning and artificial intelligence applications in robotics.
• Familiarity with ROS (Robot Operating System) and other robotics frameworks.
• Knowledge of sensor integration, machine vision, and control systems.
• Previous experience in an R&D environment or with product development in the robotics industry.
• Skills Description.
• Strong proficiency in programming languages such as C++, Python, or similar.
• Experience with robotic simulation software and CAD tools.
• Excellent problem-solving skills and the ability to think critically and creatively.
• Strong communication and interpersonal skills, with the ability to work effectively in a team environment.
• Proven track record of successfully leading and managing engineering projects.
• Skills (Attribute).
• Key Performance Indicator.
• No Data.
• Apply now.
• Start applying with LinkedIn.
• Apply Now.
• Start.
• Please wait.
• Information at a Glance.

Skills:

Electronics, Automation

Job type:

Full-time

The company, founded in 1988, is one of the leading producers in the world for power and thermal management solutions. Delta is also a major regional player in several product segments including industrial automation, displays, and networking. As an energy-saving solutions provider with core competencies in power electronics and innovative research and development, Delta's business categories include Power Electronics, Automation, and Infrastructure.

Experience:

3 years required

Skills:

Mechanical Engineering, Product Testing, Procurement, Electronics, English

Job type:

Full-time

• Remote Position: No.
• Region: Asia.
• Country: Thailand.
• State/Province: Chonburi.
• City: Laem Chabang.
• Summary.
• The Reliability Test Engineer accepts, transfers, installs, improves and maintains automatic test equipment and test programs that are used for product testing and design verification. They also may support the test development of the test equipment and processes to ensure robust and high quality test solutions and final products are realized.
• Detailed Description.
• Perform reliability testing. Write test reports and provide analysis of the test data,.
• prepare documentation and recommendations.
• Familiar with test equipment such as HALT and Environmental chambers, Power.
• supplies, DMMs, Data loggers, ThermocouplesIR cameras, Oscilloscopes etc.
• Lead meetings with customers to update the Reliability activities status.
• Work with the cross-functional team to ensure the products can meet the design specification and reliability goals.
• Conduct failure analysis (FA). Ensure that the Reliability issues have been resolved in the prompt and timely manner.
• Direct and coordinate engineering activities concerned with development, procurement, Installation, maintenance and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
• May provide training in new procedures to testing staff or technicians.
• Perform moderately complex assignments of the engineering test function.
• Knowledge/Skills/Competencies.
• Ability to read schematics.
• Knowledge of product and component failure modes and mechanisms.
• Effective communication skills and can do attitude.
• Good verbal and written communication skills in English.
• Typical Experience.
• Minimum 3 years working experience in hands-on testing of electronic products (Communication, Enterprise products, etc.).
• Typical Education.
• Bachelor of Engineering in Electronics or Mechanical engineering or related field.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.

Skills:

Instrument

Job type:

Full-time

• Design, configure, install, and test Distributed Control Systems (DCS) for industrial automation projects.
• Develop system architecture, control strategies, and engineering designs based on customer requirements.
• Configure and customize DCS applications, control logic, and graphics to support customer processes.
• Perform system integration and verify system functionality.
• Prepare engineering documentation, including functional design specifications, system configuration documents, test procedures, and project records.
• Conduct Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), commissioning, and system verification.
• Troubleshoot and resolve system issues during testing, installation, and commissioning.
• Coordinate with customers, vendors, and internal teams to clarify technical requirements and ensure successful project delivery.
• Monitor project progress and support timely completion of assigned tasks.
• Perform other duties and responsibilities as assigned by the supervisor.
• Bachelor's degree in Electrical Engineering, Control & Instrumentation Engineering, or a related field.
• Fresh graduates are welcome to apply.
• Basic knowledge of DCS and Industrial Control Systems is preferred.
• Programming knowledge in Python or C is an advantage.
• TOEIC score of 500 or above is preferred.
• Proficient in Microsoft Office (Word, Excel, PowerPoint, and Visio).
• Willing to travel domestically and overseas.
• A valid driver's license is required.
• Personal Data Protection Notice.
• By responding to Yokogawa's advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

Skills:

Electronics, Automation

Job type:

Full-time

The company, founded in 1988, is one of the leading producers in the world for power and thermal management solutions. Delta is also a major regional player in several product segments including industrial automation, displays, and networking. As an energy-saving solutions provider with core competencies in power electronics and innovative research and development, Delta's business categories include Power Electronics, Automation, and Infrastructure.

Skills:

Electronics, Automation

Job type:

Full-time

The company, founded in 1988, is one of the leading producers in the world for power and thermal management solutions. Delta is also a major regional player in several product segments including industrial automation, displays, and networking. As an energy-saving solutions provider with core competencies in power electronics and innovative research and development, Delta's business categories include Power Electronics, Automation, and Infrastructure.

Experience:

3 years required

Skills:

Procurement

Job type:

Full-time

• Manage the Request for Quotation (RFQ) process by sending RFQs, layouts, and technical documentation to suppliers, while maintaining and updating the supplier quotation database.
• Consolidate supplier quotations, prepare price comparison tables, and provide timely commercial updates to the Project Engineering (PE) team.
• Lead commercial negotiations for awarded projects to achieve the most competitive pricing. Prepare comprehensive supplier evaluation reports covering commercial compari ...
• Coordinate with overseas suppliers and monitor purchase contracts to ensure contractual compliance, identify potential commercial or contractual risks, and implement appropriate mitigation actions.
• Monitor supplier performance, including on-time delivery, product quality, engineering changes, and lead time commitments. Proactively follow up and expedite orders to minimize project delays and maintain project schedules with PM Team.
• Source and qualify new third-party equipment (3PE) suppliers to support both project execution and after-sales service requirements and related dept.
• Analyze supplier proposals and negotiate technical specifications, commercial pricing, payment terms, and delivery schedules to achieve the best overall value for the company. Maintain and periodically update supplier price lists, commercial terms, and procurement conditions.
• Evaluate, select, and develop suppliers to ensure the procurement of high-quality products and services at the most competitive total cost while meeting project quality, schedule, and performance requirements.
• Degree in Automation/Electrical/Mechatronics/Mechanical Engineering or another related field.
• 3-5 years of experience in Procurement as purchaser for machinery, automobile, automation equipment or automatic warehouse system.
• Basic knowledge of machinery and mechanical operation. Experience with control automation is a plus.
• Experience coordinating with foreign suppliers, from RFQs, negotiating contract terms and releasing purchase orders.
• Strong negotiation skills with ability to work under pressure.
• Proficient in Microsoft Office.
• Experience with ERP is an advantage.
• Strong communication and interpersonal skills working with teams.
• Good written and oral English communication skills.
• Demonstrate leadership able to independently complete all specific responsibilities with minimal supervision.

Experience:

5 years required

Skills:

Mechanical Engineering, Business Development, Project Management, Market Analysis, Problem Solving, Negotiation, English

Job type:

Full-time

• Power the Future of Energy - Join Us as a Transformer Application Engineer.
• Are you ready to power the future? At Hitachi Energy, we're not just building transformers we're transforming the way the world uses energy.
• We're looking for a.
• Transformer Application Engineer.
• who's not just technically skilled, but passionate about driving the global energy transition.
• This is your opportunity to become a trusted advisor and technical leader in a role that blends engineering expertise with strategic impact.
• In this role, you'll be the go-to expert for our cutting-edge transformer solutions, helping customers across the region embrace decarbonization, digitalization, and smarter energy systems. You'll lead business development initiatives, influence market trends, and work closely with sales, R&D, and customers to deliver transformative solutions that matter.
• If you're looking for a role where your engineering expertise drives real-world change and where your voice matters in shaping the energy landscape this is your moment.
• How you'll make an impact (Maximum 8-10 bullets).
• Lead the regional Application Engineering & Business Development activities related to the transformer portfolio by understanding Market Trends and.
• secure the anticipated growth and have positive impact on ROMI.
• Fulfill the Customer facing dimensions, activities shall include organizing and conducting Customer Technical Trainings (CTT's), attending industry conferences, customer visits, reviewing transformer specifications and influence improvement recommendations, supporting customer engagements during tender negotiation / clarification, offer technical knowledge and support to customers on transformer applications and application solutions.
• Fulfill internal Hitachi Energy facing dimensions, activities shall include internal technical training (HIIT's) and presentations, support tender strategy & negotiation recommendations. Engage with factory and tender engineering teams to develop and deploy trust, acceptance and team integration, support customer engagements during factory visits / FAT and post order problem solving.
• Develop and implement KPI's and targets covering complete Transformer portfolio and provide visibility of activity and outcomes in the dimensions listed above. The metrics for her/his performance review might include the number of CTT's, HIIT's, specifications influenced.
• You will contribute to and follow a structured market plan combining the technical info gathered with customers while deploying a strategic overview mindset.
• You will provide customer feedback as well as strategic marketing inputs to Global and Regional Product Managers and support the market analysis, validation, competitive landscape and heat maps.
• Your background (Maximum 6-8 bullets).
• BE / BS degree (in Electrical or Mechanical Engineering) from an accredited university. A master's degree and / or accreditation or membership of industry technical bodies (CIGRE, IEC etc.) is a plus.
• Minimum 5 years of experience in the technical department (R&D, Engineering or Design) or Product Marketing, Sales and Business development or Project Management in the Transformer Businesses.
• You should have a deep understanding of the transformer portfolio for different segments and applications and will support from a technical knowledge point of view the Front-End Sales Team for the Marketing and Sales activities in the given Country/Region.
• The person in this role should have strong technical skills, in addition to the marketing experience, to be able to bridge the gap between technical and marketing teams in the company and exhibit excellent networking skills demonstrating "leading by influence".
• Intercultural sensitivity is required, with excellent communication skills in oral and written, with colleagues from multi-countries for assigned region.
• A strong grasp of the English and local language is a must.
• Be willing to travel ~ 50%.