Filter Jobs

Experience:

5 years required

Skills:

Mechanical Engineering

Job type:

Full-time

• Review contract specifications and develop the design in accordance with these requirements, while conforming to company standards.
• Run ASME pressure part code calculations to ensure that all pressure retaining components of the heat recovery steam generator (HRSG) meet code requirements.
• Prepare, or coordinate with other department specialty engineers, all calculations in accordance with the requirements of the contract.
• Participate in engineering project team meetings to review the progress against the management plan and discuss potential delays.
• Review and respond to customer and sub-vendor comments.
• Notify the Project Engineer of contract changes that result in price additions or deducts.
• Bachelor's Degree in Mechanical Engineering.
• Good written and verbal English communication skills.
• Works well in a multidisciplinary, fast paced team environment.
• 5+ years of directly related experience in pressure part calculations, e.g., drums, vessels, and/or piping, and ASME/EN Codes. Experience with HRSGs, boilers, and other heat recovery products preferred.
• Excellent skills with Microsoft Office products.

Experience:

2 years required

Skills:

Mechanical Engineering, Cost Estimation, Petrochemical

Job type:

Full-time

• Selection, sizing, and engineering of rotating equipment and/or packaged systems.
• Conduct site visits (onshore/offshore) as required.
• Prepare mechanical data sheets, specifications, and requisition/enquiry packages.
• Review vendor proposals, prepare technical clarifications, and conduct technical bid evaluations.
• Review vendor drawings/documents and incorporate vendor data into project deliverables.
• Develop supporting documents such as equipment lists, material handling studies, and design adequacy reports.
• Review interdisciplinary documents including P&IDs, equipment layouts, and foundation drawings.
• Witness shop inspections and equipment testing.
• Assist in plant erection, commissioning, and start-up activities.
• Bachelor's degree or higher in Mechanical Engineering or a related field.
• Possession of a Level-I Professional Engineering License from the Council of Engineers of Thailand (preferred).
• 2-4 years of experience in mechanical equipment design and engineering within Oil & Gas, Refinery, Petrochemical, Chemical, or related industries.
• Strong motivation and eagerness to learn and take on new challenges.
• Familiarity with local and international codes and standards such as API, ASTM, ASME, ANSI, TEMA, ISO, ASHRAE, ARI, NFPA, UL, FM, etc., relevant to rotating equipment.
• Knowledge of machine noise and vibration analysis, as well as auxiliary systems (e.g., seal oil, lube oil, shaft sealing, drives).
• Proficiency in MS Office and mechanical equipment design software/tools.
• HIRING CONDITION.
• Fixed Term Contract Staff for 1 Year.

Experience:

1 year required

Skills:

AutoCAD, Thai

Job type:

Full-time

• ควบคุมติดตั้งงานระบบประกอบอาคาร.
• จัดทำแผนงาน เคลียร์ shop Drawing ตรวจสอบเอกสาร รายงานวางแผนความคืบหน้า.
• ทำเอกสารต่าง ๆ ที่เกี่ยวข้อง Method ขออนุมัติวัสดุอุปกรณ์ ร่วมประชุมติดตามงาน.
• งานอื่น ๆ ที่ได้รับมอบหมาย.
• สามารถไปปฎิบัติงานตามไซต์งานได้.

Experience:

3 years required

Skills:

Mechanical Engineering, Recruitment, Automation, English, Thai

Job type:

Full-time

• Perform preventive and corrective maintenance on HVAC systems, chillers, and cooling units.
• Monitor and optimize chilled water plant operations.
• Maintain Computer Room Air Conditioning (CRAC/CRAH) units.
• Conduct vibration analysis and thermal performance testing.
• Troubleshoot mechanical system failures and implement solutions.
• Manage water treatment programs for cooling systems.
• Maintain pumps, piping systems, and associated mechanical equipment.
• Perform energy efficiency assessments and optimization.
• Maintain mechanical documentation and maintenance records.
• Support capacity planning for cooling infrastructure.
• Coordinate with vendors for specialized maintenance activities.
• Ensure environmental conditions meet data center specifications.
• Bachelor's degree in Mechanical Engineering or HVAC Engineering.
• Minimum 3-5 years in mechanical maintenance, preferably in data centers or cleanroom facilities.
• Experience with precision cooling systems and chilled water plants.
• Strong knowledge of HVAC principles and refrigeration systems.
• Proficiency in reading P&ID and mechanical drawings.
• Understanding of building automation systems.
• Analytical and troubleshooting skills.
• Knowledge of energy management principles.
• Ability to work in shift rotation (24/7 operations).
• HVAC certification or equivalent.
• Chiller and cooling system manufacturer training.
• Water treatment certification.
• Fluent in Thai; working knowledge of English.
• On-site - Bangkok, THA.
• If this.
• resonates with you, we encourage you to apply even if you don't meet all of the requirements. We're interested in getting to know you and what you bring to the table!.
• At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing.
• JLL Privacy Notice.
• Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely.
• For more information about how JLL processes your personal data, please view our Candidate Privacy Statement.
• For additional details please see our career site pages for each country.
• Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at [email protected]. This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL.

Skills:

Mechanical Engineering, Project Management, Risk Management, Procurement, Leadership Skill

Job type:

Full-time

• Bachelor's degree in Mechanical Engineering.
• Knowledge of mechanical systems used in a building environment (such as chillers, air handling units, pumps and CRAC/CRAH units).
• Good command in English preferred.
• Job responsibilities.
• Ensure all site Mechanical tasks are undertaken in line with company procedures and policies to ensure the health, safety and welfare of employees and contractors whilst working.
• Reviewing and understanding of commissioning plans, optimizing mechanical systems to provide efficiency, quality, resilience and reliability across essential systems.
• Act as Mechanical Engineering and Operation Lead, coordinating design development, reviewing consultant deliverables, and ensuring integration of mechanical systems with electrical and architectural disciplines.
• Engage and negotiate with Contractors, Subcontractors, and Suppliers to ensure quality, cost efficiency, and timely delivery of mechanical equipment and services.
• Collaborate with Project Management (PM) and Construction Management (CM) teams to align mechanical design and construction activities with project milestones, CAPEX budgets, and risk management strategies.
• Provide technical leadership in Value Engineering, sustainability initiatives, and decarbonization strategies for mechanical systems.
• Develop and manage preventive and predictive maintenance programs for mechanical infrastructure (cooling systems, HVAC, CRAC/CRAH/FAN WALL units, chilled water systems, etc.) to ensure uptime and reliability.
• Lead mechanical capacity planning and scalability studies to support IT load growth and future expansion.
• Ensure compliance with data center industry standards for mechanical systems design and operation.
• Coordinate with procurement teams to evaluate mechanical equipment vendors, review warranties, and manage lifecycle replacement planning.
• Any other duties reasonably associated with this position.

Experience:

1 year required

Skills:

Mechanical Engineering, Automation, SOLIDWORKS, AutoCAD, English

Job type:

Full-time

• Improve and optimize manufacturing equipment from tableting through material preparation processes.
• Monitor and improve equipment KPIs including UPH, Utilization Rate, OEE, TEEP, MTTR, and CPK.
• Analyze and optimize equipment mechanical structures to improve reliability and productivity.
• Conduct failure analysis (FA) and implement corrective actions for major equipment issues.
• Improve and optimize fixtures, jigs, tooling, and consumable parts.
• Support equipment modification, installation, and commissioning projects.
• Develop technical documentation and equipment improvement reports.
• Collaborate with production and engineering teams to improve manufacturing performance.
• Participate in continuous improvement and cost reduction initiatives. What you'll need.
• Bachelor's degree or above in Mechanical Engineering, Automation Engineering, Mechatronics, or related fields.
• Minimum 1 year of experience in mechanical engineering or manufacturing engineering.
• Proficient in AutoCAD, SolidWorks, and PRO/E.
• Familiar with mechanical transmission systems and component selection.
• Able to design non-standard mechanical equipment components.
• Strong troubleshooting and analytical skills.
• Good command of English; Chinese language skills are an advantage.

Experience:

2 years required

Skills:

Chemical Engineering, Safety Management, English

Job type:

Full-time

• Perform routine maintenance, troubleshooting, and repair of mechanical equipment such as Electrical, Controller and other machinery used in Industrial production.
• Plan, monitor and control the Preventive and Corrective Maintenance activities to achieve the company objectives.
• Provide and develop the effective preventive maintenance plan to match with the production schedules.
• Support to install and commissioning the new machines and equipment into the factory.
• Prepare reports for maintenance department and issue PR for Maintenance department.
• Collaborate with other relevant teams to ensure effective and productive operations that meet all safety standards, including workplace safety and other important industry standards.
• AIPSM and CCPS Activities.
• Participate in company activities as assigned.
• Comply with ad-hoc tasks as per assignment.
• Bachelor's degree in mechanical or chemical engineering.
• Minimum 2-5 Years Experiences works maintenance of mechanical, manufacturing, chemical process.
• Problem-solving skills with the ability to troubleshoot complex mechanical issues independently.
• Must have safety management & contractor management experience as compulsory.
• Good interpersonal and communication skills.
• Good command of English and computer literacy.
• Brenntag provides equal employment opportunities to qualified applicants and employees of all backgrounds and identities to create a workplace where difference is valued because it forms a resilient and more innovative organization. We do not discriminate on the basis of age, disability, gender identity, sexual orientation, ethnicity, race, religion or belief, parental and family status, or any other protected characteristic. We welcome applications from women, men and non-binary candidates of all ethnicities and socio-economic backgrounds.
• Brenntag TA Team.

Experience:

3 years required

Skills:

Mechanical Engineering, Recruitment, Automation, English, Thai

Job type:

Full-time

• Perform preventive and corrective maintenance on HVAC systems, chillers, and cooling units.
• Monitor and optimize chilled water plant operations.
• Maintain Computer Room Air Conditioning (CRAC/CRAH) units.
• Conduct vibration analysis and thermal performance testing.
• Troubleshoot mechanical system failures and implement solutions.
• Manage water treatment programs for cooling systems.
• Maintain pumps, piping systems, and associated mechanical equipment.
• Perform energy efficiency assessments and optimization.
• Maintain mechanical documentation and maintenance records.
• Support capacity planning for cooling infrastructure.
• Coordinate with vendors for specialized maintenance activities.
• Ensure environmental conditions meet data center specifications.
• Bachelor's degree in Mechanical Engineering or HVAC Engineering.
• Minimum 3-5 years in mechanical maintenance, preferably in data centers or cleanroom facilities.
• Experience with precision cooling systems and chilled water plants.
• Strong knowledge of HVAC principles and refrigeration systems.
• Proficiency in reading P&ID and mechanical drawings.
• Understanding of building automation systems.
• Analytical and troubleshooting skills.
• Knowledge of energy management principles.
• Ability to work in shift rotation (24/7 operations).
• HVAC certification or equivalent.
• Chiller and cooling system manufacturer training.
• Water treatment certification.
• Fluent in Thai; working knowledge of English.
• On-site - Bangkok, THA.
• If this job description resonates with you, we encourage you to apply even if you don't meet all of the requirements. We're interested in getting to know you and what you bring to the table!.
• At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing.
• JLL Privacy Notice.
• Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely.
• For more information about how JLL processes your personal data, please view our Candidate Privacy Statement.
• For additional details please see our career site pages for each country.
• Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at [email protected]. This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL.

Experience:

1 year required

Skills:

Electronics, Automation, AutoCAD

Job type:

Full-time

• Assume the role of the mechanical designer responsibility, in the area of part/product quality and testing assurance.
• Perform project scheduling, costing & quality plan & strategy.
• Communication with customer for product specification & design.
• Coordinate with QE/Safety member regarding testing procedure & specification to ensure product is tested correctly.
• Design & develop mechanical enclosure & packaging for power supply unit.
• Create drawing, Bill of Material, Operation Standard for assembly & qualification of part design. Support Power Supply making process during development cycle on mechanical issue.
• Technical support for DET model introduction, in term part quality & PSU assembly matter.
• Issue & update document for design change, revise drawing & issue design change notice.
• Bachelor's Degree or higher in Mechanical, Mechatronics, Automation Engineering or other related field.
• At least 1 years of working experience in automation machine design or development.
• Computer expertise: Solid Work, inventor, AutoCAD 3D and 2D Drawing.
• Excellent time management skills.
• Good command of both spoken and written English, able to speak in Chinese is a plus.

Skills:

CAD, AutoCAD, 3D Modeling

Job type:

Full-time

• Design and preparation of construction drawings for DC switchgears and cubicles (For Traction Power Supply Systems in the field of Railway Electrification) taking into account both, the customer specifications and the Siemens' regulations and standards.
• Methodic construction of switchgears with the 3D-tool "NX/Team Center", modeling of components.
• Maintaining of product data/documentations in SAP.
• Elaboration of conceptional solutions and finding answers to ambitious constructive requirements.
• Technical support, analysis of technical problems and answering of technical inquiries in collaboration with the manufacturing, the project engineering team and the project management.
• Planning and controlling of one's own engineering work packages in view of date, cost and quality aspects.
• Awarding of work packages to external engineering service providers and controlling of the work results.
• Product support in view of standardization and documentation.
• Use your skills to move the world forward.
• Bachelor degree or higher in Mechanical Engineering, Electrical Engineering or Mechatronics.
• Knowledge of switchgear construction and cubicle/cabinet construction.
• CAD-tools NX (Preferred), AutoCAD Mechanical, Creo (Standard and Steel Plate) or others solid 3D modeling program.
• Knowledge of relevant European and International Standards.
• Basic knowledge of electrical engineering (schematic and wiring diagrams).
• Experience in design and planning of electrical substations.
• Experience in project realization, preferably in an international project environment.
• Verbal and written fluency in English.
• Why you'll love working for Siemens Mobility.
• We live and foster an ownership culture in which every employee takes personal responsibility for our Company's success. We invest in our team members, offering a wide variety of development.
• Flexible working arrangements.
• Flexible Benefits Program for employees & dependents.
• Medical Insurance for Spouse and Children.
• Siemens Share Options.
• National & International opportunities.
• Positive, inclusive and relaxed working environment.
• Join a team dedicated to transforming the everyday for a more sustainable future.
• Siemens prides itself on its diverse workforce.
• Siemens has been recognised as ahead of its time for many reasons, and our progressive policies is one of them. We encourage applications that reflect the diversity of the communities within which we work.
• We are a proud equal opportunity employer, where we continue to push for a work environment of diversity and inclusion, we also believe that differences in personalities, thoughts and ideas are important, and that is why we know diversity and inclusion is very important in helping realise the potential of our people. As part of our Ownership culture, Siemens supports reasonable flexible working practices that empower our employees to best meet work and personal commitments.

Experience:

5 years required

Skills:

Mechanical Engineering, Petrochemical

Job type:

Full-time

• Resource planning and work scheduling for planned and unplanned maintenance work.
• Prepare & timely review & take care of maintenance management system and maintenance program.
• Manage and control quality of work, maintenance cost, work schedule, sub-contractor and maintenance crew, safety at work.
• Troubleshooting, repair & overhauling equipment, and root cause analysis.
• Involvement in equipment or plant modification & improvement programs.
• Bidding for and bid evaluation of maintenance subcontractor.
• Lead maintenance crew to drive productivity improvement activities.
• Degree in Mechanical Engineering with a minimum GPA of 2.7 for Bachelor or 3.3 for Master.
• 0-5 years of experience in Maintenance.
• Fresh Graduate are welcome.
• Prior experience in Petrochemical or Oil & Gas Plants is an advantage.
• Willing to work in Rayong province.
• TOEIC score of 550 or higher.

Experience:

3 years required

Skills:

Mechanical Engineering, Procurement, CAD

Job type:

Full-time

• Bangkok, Bangkok, Thailand.
• Eco Plant Services Co., Ltd.
• Apply for Position.
• Or refer someone.
• Job Openings.
• Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• Mechanical Design Engineer (EPS), Bang Sue Based (Special Contract).
• VSPP Power Plant & Renewable field.
• Fuel MSW & Industrial Waste Power Plant is a special consideration.
• EPC Business Turnkey (Engineering, Procurement and Construction).
• Satisfy Owner.
• Requirements based on Design, Regulations, Laws, Standards, Codes and advise customer solutions.
• Provide design for safe operation & maintenance with recommended solutions to owner.
• Familiar with the process of related permits: EIA, EHIA, COP, Construction Permit, Factory License requirements, PEA, and ERC.
• Prepare Tendering, Bidding, and Proposal in terms of Technical Data & support for Mechanical Process, Boiler, Ash Handling System, Steam Turbine, Air-Cooled/Water-Cooled Condenser, Air Compressor, Fuel Feeding System, Flue Gas Treatment System, Water Treatment Plant according to TOR.
• Clarify requirements and follow up on, or clear, pending issues and lists via Piping Specifications & Routes, Equipment General Arrangement (GA), P&ID as mechanical integration with other systems such as Tie-in or Terminal Points.
• Verify and cross-check Heat and Mass Balance, Firing Diagram of Combustion, Water Balance, Utility Consumption in Mechanical field.
• Raise any mechanical concern or critical issue to team, if any, for consultation and resolution with team decision-makers, such as deviations from TOR, high impacts to cost, improper design, unsafe operation, or mismatches with other systems.
• Maintain close contact with Owners, Suppliers, Contractors, Vendors, and internal departments for implementation and rectification of related issues.
• Bachelor's Degree in Mechanical Engineering.
• At least 3-5 years of experience in Power Plant Design is preferred.
• Proficient in CAD software and Drawing Viewer applications.
• Understand the basic overall process of a Power Plant.
• Basic knowledge of rotating machinery such as Boiler Feed Water Pumps, Fans, Valve Types, Piping, Pressure Parts, ASME, ASTM, ANSI, JIS, DIN, GB, and EN.
• Commissioning and testing of machinery and piping such as Pressure Test, Cleaning, Leak Test in Water, Air, Chemical, etc.
• Basic knowledge of Operation & Maintenance in Power Plants, Consumption & Consumables for running Power Plants, Discharge Ash Treatment, Flue Gas Emission Control, Water Regulations.
• Communication skills with the ability to quickly summarize key points.
• Coordination with Suppliers, Owners, Contractors, Team Members, and internal departments.
• Apply for Position.
• Or refer someone.
• Share.
• Facebook.
• Line.
• LinkedIn.
• X (Formerly Twitter).
• Whatsapp.
• Email.

Skills:

Mechanical Engineering, Project Management, Quality Assurance, Risk Management, Assurance

Job type:

Full-time

• Taking responsibility for delivery of projects from initial design, through to construction and final review.
• Be the point of contact for the client team on day-to-day project matters.
• Lead a large project design team, oversee and coordinate the work of a team multi-disciplinary engineers, designers and drafters. Engineering disciplines to be managed and coordinated include mechanical and electrical, civil, structural, security, architectural and ICT.
• Working in collaboration with other design disciplines, locally and regionally to ensure the integrity of the overall design.
• Lead the multi-disciplinary team in the production of design documentations including detailed design drawings, specifications, design report, calculations, BIM models, and other technical documents.
• Chair internal and external design meetings.
• Managing projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications.
• Assisting in workload management and resource forecasting and involved in preparation of proposal documentation.
• Reviewing and ensuring compliance, including drawings, reports, specifications, survey, access, and preparation of appraisals.
• Building and maintaining effective relationships with clients, recognizing, and developing potential business opportunities.
• Applying an understanding of construction/engineering project management principles to plan and deliver infrastructure projects of varying complexity.
• Managing work programmes to ensure that they are delivered to client expectations, timeframes and specifications.
• Engaging with multiple stakeholders and managing competing priorities.
• Supporting multiple concurrent projects across the entire life cycle, including planning, design verification, tendering, contract administration, financial management, project scheduling and risk management.
• We know today's complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.
• What can you bring to the team?.
• A Bachelor's Degree in Mechanical Engineering, with at least 7 years' relevant experience in Buildings Mechanical Design, installation and testing and commissioning, and leading delivery of multi-disciplinary projects in modern commercial and industrial buildings. Data Centre Experience will be preferred.
• Strong project management skills with ability to lead a large project team on technical delivery.
• Excellent presentation, verbal, and written communication skills.
• Sufficient experience to demonstrate intermediate to advanced knowledge of relevant engineering codes, standards, and practices.
• Organized approach and ability to accept increased responsibility and produce accurate and detailed work.
• High level of computer literacy and exposure to BIM / Revit will be highly desired, with advanced problem-solving skills through investigation and analysis.
• Literacy in the use of digital tools such as Autodesk Construction Cloud, Autodesk Naviswork, BIM360 and drive BIM processes.
• Strong ability in navigating 3D BIM model to review multi-disciplinary design, identify issues, provide solutions and delegate the design team to resolve them.
• Our Aurecon Attributes define our way of being - they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don't expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here.
• We value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?.
• About Us.
• Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.
• Over the last 85 years, our team of more than 7,800 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world's most complex challenges.
• In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking - an approach that is guided by digital engineering, the user experience and sustainability - ensuring that the work we do is future ready and leaves a legacy for the next generation.
• Think engineering. Think again.

Skills:

Mechanical Engineering

Job type:

Full-time

• Ensure reliable operation of critical mechanical infrastructure including HVAC, chillers, cooling towers, pumps, and associated systems.
• Monitor mechanical system performance and conduct troubleshooting to minimize downtime.
• Plan, coordinate, and supervise preventive and corrective maintenance activities.
• Support incident response and root cause analysis for mechanical equipment failures.
• Ensure compliance with maintenance procedures, safety requirements, and operational standards.
• Coordinate with vendors and contractors for servicing and repair activities.
• Identify opportunities for energy optimization and mechanical system improvements.
• Maintain accurate maintenance records and provide technical reports and recommendations.
• ดูแลการทำงานของโครงสร้างพื้นฐานระบบวิศวกรรมเครื่องกลที่สำคัญให้เป็นไปอย่างมีเสถียรภาพและน่าเชื่อถือ รวมถึงระบบ HVAC, เครื่องทำน้ำเย็น (Chillers), หอระบายความร้อน (Cooling towers), ปั๊มน้ำ และระบบอื่นๆ ที่เกี่ยวข้อง.
• เฝ้าระวังประสิทธิภาพของระบบเครื่องกลและดำเนินการแก้ไขปัญหา (Troubleshooting) เพื่อลดระยะเวลาที่ระบบหยุดทำงาน (Downtime) ให้ได้มากที่สุด.
• วางแผน ประสานงาน และกำกับดูแลกิจกรรมการบำรุงรักษาเชิงป้องกัน (Preventive maintenance) และการบำรุงรักษาแก้ไข (Corrective maintenance).
• สนับสนุนการรับมือกับเหตุการณ์ขัดข้องและการวิเคราะห์หาสาเหตุที่แท้จริง (Root cause analysis) เมื่อเกิดความเสียหายกับอุปกรณ์ระบบเครื่องกล.
• กำกับดูแลการปฏิบัติงานให้เป็นไปตามขั้นตอนการบำรุงรักษา ข้อกำหนดด้านความปลอดภัย และมาตรฐานการปฏิบัติงาน.
• ประสานงานกับผู้ให้บริการ (Vendors) และผู้รับเหมาสำหรับการเข้าบริการบำรุงรักษาและงานซ่อมแซม.
• ค้นหาแนวทางในการประหยัดพลังงาน (Energy optimization) และการปรับปรุงประสิทธิภาพของระบบเครื่องกล.
• จัดทำและดูแลบันทึกการบำรุงรักษาอย่างถูกต้อง แม่นยำ พร้อมทั้งจัดทำรายงานทางเทคนิคและข้อเสนอแนะ.
• s-premium.
• INCO: "Cushman & Wakefield".

Experience:

3 years required

Skills:

Mechanical Engineering

Job type:

Full-time

• Prepare agendas, develop and maintain master project budgets and timelines as required for each project and project phase to ensure overall project objectives and client needs are met. Keep building management apprised of progress at all times.
• Prepare and coordinate project reports and drawing reviews for clients, property/facility management team, and project team (as applicable) at conceptual, schematic, design development and construction phases of project.
• Assist in the selection, contracting process and oversight of consultants and constr ...
• Review requisitions, change orders and other invoices associated with the project and confer with client and property management on costs and impacts.
• Support the marketing of services to clients as requested.
• Adhere to corporate, building, and client policies and procedures.
• Cooperate with other building/facility personnel to achieve goals and objectives as to quality, service, cost and profit.
• Report to immediate supervisor major problems and findings and results achieved with recommendations.
• Advise and obtain the necessary approvals from the appropriate members of management of potential organizational changes, actions that might require additional commitments, and the need for expenditures in excess of approved budget.
• Adhere to government laws and regulations and established rulings of government authorities, including building codes, safety regulations, etc.
• Maintain high qualitative and quantitative standards of work performance.
• Strive constantly to improve skill and work knowledge; keep up to date in the field of specialization.
• B.S. Degree in Mechanical Engineering.
• Minimum 3 years of relevant experience in Data Centre or critical infrastructures.
• INCO: "Cushman & Wakefield".

Skills:

Mechanical Engineering

Job type:

Full-time

• กำหนดแผนงานบำรุงรักษาและควบคุมงานทั้งเชิงป้องกัน (PM), เชิงพยากรณ์ (PdM), เชิงแก้ไข (CM) และงานปรับปรุง (Modification) เพื่อเพิ่มความเชื่อถือ (Reliability) ของเครื่องจักร รวมไปถึงงานซ่อมใหญ่ (Overhaul) ประจำปี ให้สอดคล้องกับแผนการสูบ-จ่ายน้ำดิบ.
• ควบคุมการปฏิบัติงานบำรุงรักษาเชิงป้องกันเครื่องจักรและอุปกรณ์ระบบสูบจ่ายน้ำ และตรวจสอบความถูกต้องรายงานประจำเดือน.
• ปฏิบัติงานร่วมกับฝ่ายปฏิบัติการและบริการจ่ายน้ำ, ฝ่ายวิศวกรรมและโครงการก่อสร้าง และหน่วยงานอื่นๆ ในด้านการให้คำปรึกษา, ด้านข้อเทคนิคทางวิศวกรรม การออกแบบ การปรับปรุงแก้ ...
• การเสนอแนวทางดำเนินงานเพื่อปรับปรุงเครื่องจักร อุปกรณ์ระบบสูบจ่ายน้ำ (Modification)และติดตามให้แล้วเสร็จตามแผน และศึกษาเทคโนโลยีด้านบำรุงรักษา ติดตามการเก็บประวัติอุปกรณ์ และประวัติการบำรุงรักษาที่เกี่ยวข้อง เพื่อนำมาใช้วิเคราะห์ข้อมูล และพัฒนาปรับปรุง.
• ดำเนินการรวบรวมและวิเคราะห์ Root Cause Analysis (RCA) เพื่อหาสาเหตุและลดโอกาสการเกิดซ้ำ.
• จบการศึกษาระดับปริญญาตรีขึ้นไป สาขาวิศวกรรมเครื่องกล หรือสาขาที่เกี่ยวข้อง.
• มีประสบการณ์การทำงานด้านการซ่อมบำรุง และติดตั้งเครื่องจักร 3-5 ปี ในด้าน Rotating Equipment เช่น Centrifugal Pump, Compressor, Fan, Blower, Gearbox หรือระบบท่อ Piping หรือ Valve เช่น Butterfly valve, Gate Valve, Pressure Control Valve และ Valve ประเภทอื่นๆ.
• มีประสบการณ์ด้านงาน กำหนดแผนงานบำรุงรักษาทั้งเชิงป้องกัน (PM), เชิงพยากรณ์ (PdM), เชิงแก้ไข (CM) และงานปรับปรุง (Modification) เพื่อเพิ่มความเชื่อถือ (Reliability) ของเครื่องจักร รวมไปถึงงานซ่อมใหญ่ (Overhual) ประจำปี ให้สอดคล้องกับแผนการสูบ-จ่ายน้ำดิบ.
• มีความรู้ความเข้าใจหลักการ Vibration Analysis, Aligment, Balancing และ Root Cause Failure Analysis (RCFA).
• สามารถวิเคราะห์ปัญหา Failure / Performance Degradation และเสนอแนวทางแก้ไขเชิงวิศวกรรมได้.
• สามารถควบคุมการปฏิบัติงานบำรุงรักษาเชิงป้องกันเครื่องจักรและอุปกรณ์ระบบสูบจ่ายน้ำ และตรวจสอบความถูกต้องรายงานประจำเดือน.
• สถานที่ปฏิบัติงาน: East Water พื้นที่ปฏิบัติการ จ.ระยอง.

Experience:

3 years required

Skills:

Product Development, Industry trends, Data Analysis

Job type:

Full-time

• Lead and execute applied research and development projects, driving innovation and technological advancements.
• Collaborate with cross-functional teams to understand business needs and translate them into technical requirements.
• Design, develop, and test prototypes, ensuring they meet performance, reliability, and quality standards.
• Stay updated with industry trends and emerging technologies, identifying opportunities for improvement and innovation.
• Mentor and guide junior team members, fostering a culture of knowledge sharing and continuous learning.
• Document and present research findings, providing clear and concise reports to stakeholders.
• Ensure compliance with industry regulations and standards, maintaining a high level of ethical and professional conduct.
• Continuously seek opportunities for process improvement, streamlining workflows, and enhancing efficiency.
• A strong foundation in engineering principles and a passion for research and development.
• Demonstrated expertise in problem-solving and critical thinking, with the ability to approach challenges creatively.
• Excellent communication and collaboration skills, with a track record of working effectively in diverse teams.
• 3+ years of mechanical design experience in product development, validation, reliability, or manufacturing environments.
• Experience in leading and managing research projects, demonstrating the ability to deliver results.
• Proficiency in relevant software and tools for data analysis, simulation, and prototyping.
• A proactive and self-motivated mindset, with a drive to stay updated with industry advancements.
• A relevant engineering degree or equivalent professional experience.

Experience:

5 years required

Skills:

Mechanical Engineering

Job type:

Full-time

• He takes care of his safety and that of one of his colleagues.
• Be responsible for the correct performance of the maintenance of the turbine mechanical equipment of the facilities in compliance with the O&M manuals, procedures, spare parts, consumables use, schedule, safety, quality, and reporting.
• Usually, he or his team carries out inspections or works, mostly on shutdown equipment, in the turbine mechanical and hydraulics fields. Before acting, he prepares or makes sure that the work is prepared to optimize the quality, the outage duration, an ...
• Daily, weekly, monthly, and yearly maintenance plans (PM, CM, IM, MOC, including outage).
• Performing preventive, corrective, proactive, outage, and improvement maintenance work orders assigned.
• Ensure the work is carried out according to the work preparation and make frequent quality controls.
• Leading installation of any new equipment as required and directed.
• Leading maintenance, troubleshooting, and repairing turbine mechanical and auxiliary equipment, including BOP in the power plant.
• Assign the team daily, weekly, and monthly job plans from the planning team and follow up on the quality and quantity.
• Be responsible for the good use and maintenance of mechanical tools and equipment.
• Make the report for the job to record the data that can be tracked in the future.
• Make incident reports with root cause analysis for every event and incident.
• Participate in the creation of the weekly planning with the team leader and section manager - mechanical & turbine engineering.
• Corporation with the section and the electric & SCADA team to work together.
• Make the spare part inventory ready to use and count the tools, equipment, and consumables.
• Participate in the yearly budget to offer some ideas for next year.
• Prepare the data collection for condition-based monitoring (Vibration, Oil condition, and temperature) to plan for a predictive and condition-based plan and proposal.
• Create Work Instructions (WI) for all those related to the work and training of the team.
• Performing cleaning duties as required and assigned.
• Taking actions necessary to prevent any failures.
• Performing duties safely and economically, taking reasonable care of health and safety.
• Being aware and playing a vital role in considering the essentials of environmental management by ISO14001, Quality management by ISO9001, Safety and Occupational health by ISO45001, and Information security management systems by ISO27001.
• The position generally involves occasional sitting, frequent standing, walking, heavy lifting, and carrying.
• Frequent kneeling, twisting, and balancing, frequent climbing, reaching, pushing/pulling, and grasping operations on machinery and hand tools.
• Working with heavy equipment. Work includes the hydraulic high-pressure line, electrical system, and components.
• Work is obstructed or requires awkward positions. May be required to work outside in inclement weather conditions, exposed to noise, and a hot work environment. Work in a confined space or at a high elevation when necessary.
• The job requires constant attentiveness and awareness. Extreme pressure may exist in the event of an equipment failure or personal problems.
• Work is performed during the daytime. But it may adjust to shift during outage, on call, shift hours may be changed on occasion, and availability for overtime work is required.
• The use of respirators, protective clothing, and/or other personal safety equipment may be required.
• Bachelor's Degree in Engineering, Mechanical Engineering, or related.
• Minimum 5 years experience in Hydro, Thermal, and Cogen or revenue plant.
• Experience in Hydrolic system, Pump and Motor, HVAC, Cranes.
• Root cause analysis, Vibration and oil analysis.

Experience:

1 year required

Skills:

Automation, Mechanical Engineering

Job type:

Full-time

• Create detailed 2D drawings and 3D models using SolidWorks, AutoCAD, or equivalent CAD software.
• Prepare manufacturing drawings, BOMs (Bill of Materials), and technical documentation.
• Conduct design reviews and ensure designs meet functional, safety, quality, and manufacturability requirements.
• Collaborate with production, process, electrical, and automation engineers during project development and implementation.
• Support prototype builds, testing, troubleshooting, and design validation activities.
• Coordinate with suppliers and vendors for component selection and fabrication.
• Improve existing designs to enhance reliability, performance, and cost efficiency.
• Participate in project planning and ensure timely completion of assigned tasks.
• Ensure compliance with company engineering standards and customer requirements.
• Educational Background: Bachelor's Degree in Mechanical Engineering, Mechatronics Engineering, or a related field.
• 1-3 years of experience in mechanical design engineering.
• Proficiency in SolidWorks, AutoCAD, or similar CAD design software.
• Experience creating detailed engineering drawings and GD&T interpretation.
• Knowledge of manufacturing processes such as machining and assembly.
• Strong problem-solving and analytical skills.
• Ability to manage multiple projects and priorities.
• Language Proficiency: Good English communication skills and ability to work effectively in a team environment.
• Additional Information.
• Why Join Us?.
• At Bosch, we shape the future with high-quality technologies and services. This is your chance to gain hands-on experience in a world-class manufacturing environment, collaborate with a dynamic team, and drive employee satisfaction in a highly supportive and professional workplace.

Experience:

3 years required

Skills:

Mechanical Engineering, Production Engineering, English, Thai

Job type:

Full-time

• Study and analyze manufacturing processes to identify opportunities for productivity, quality, and efficiency improvement.
• Develop and implement process improvement initiatives to reduce production costs and minimize waste.
• Analyze and solve production-related problems and carry out assigned improvement projects.
• Improve production capacity and equipment/process effectiveness, including performance indicators such as OEE and %DTP.
• Collaborate with production and related departments to implement continuous improvement initiatives.
• Develop, review, and update work instructions and operating procedures to maintain relevant management and operational standards.
• Ensure improvement activities and operations comply with applicable standards and requirements.
• Identify and apply new technologies to improve manufacturing processes and working efficiency.
• Bachelor's degree in Mechanical Engineering, Production Engineering, Manufacturing Engineering, or other related engineering fields. (Bachelor GPA > 2.70, Master GPA > 3.30).
• 0-3 years of experience in manufacturing, process improvement, productivity improvement, production engineering, or related fields.
• Knowledge of manufacturing processes, productivity improvement, and process optimization.
• Knowledge of OEE, waste reduction, cost reduction, and continuous improvement is an advantage.
• Knowledge of maintenance, manufacturing equipment, or relevant industrial standards is an advantage.
• Good analytical, problem-solving, communication, and interpersonal skills.
• Proactive, adaptable, and able to collaborate effectively with cross-functional teams.
• Good command of English in verbal and written communication (TOEIC > 550).
• Willing to work onsite at Thai Containers Group Co., Ltd. (Surasak, Si Racha, Chonburi).