Babcock Power (Thailand) Co., Ltd.aaaa
Apply now to 5 new job positions at Babcock Power (Thailand) Co., Ltd.aaaa
Experience:
5 years required
Skills:
Mechanical Engineering, Microsoft Office, English
Job type:
Full-time
Salary:
฿25,000 - ฿31,000, negotiable
- Review contract specifications and develop the design in accordance with these requirements, while conforming to company standards.
- Run ASME pressure part code calculations to ensure that all pressure retaining components of the heat recovery steam generator (HRSG) meet code requirements.
- Prepare, or coordinate with other department specialty engineers, all calculations in accordance with the requirements of the contract.
- Participate in engineering project team meetings to review the progress against the management plan and discuss potential delays.
- Review and respond to customer and sub-vendor comments.
- Notify the Project Engineer of contract changes that result in price additions or deducts.
- Bachelor's Degree in Mechanical Engineering.
- Good written and verbal English communication skills.
- Works well in a multidisciplinary, fast paced team environment.
- 5+ years of directly related experience in pressure part calculations, e.g., drums, vessels, and/or piping, and ASME/EN Codes. Experience with HRSGs, boilers, and other heat recovery products preferred.
- Excellent skills with Microsoft Office products.
7 days ago
See morekeyboard_arrow_down
Experience:
5 years required
Skills:
Amazon AWS, Power point, Visio
Job type:
Full-time
Salary:
฿31,000 - ฿65,000, negotiable
- During project proposal process, review customer specifications and identify any exceptions or clarifications that should be resolved with the customer.
- Review project specific customer specification and identify special manufacturing or quality control requirements for inclusion in project quality planning documentation.
- Identify standard Vogt Power International quality requirements for inclusion in Vendor requirements.
- Identify subcontracting and manufacturing required customer submittals.
- Identify subcontracting and manufacturing required documentation required for final document submittal to customer.
- Review Vogt Power International Equipment Purchasing Packages for subcontracted equipment to assure inclusion of all relevant manufacturing and quality control requirements.
- Review and approve required subcontractor submitted quality documentation.
- Review weekly inspection reports from third party inspectors to insure compliance with requirements.
- Develop ASME Code Data Packages.
- Assist Subcontract Managers in resolution of subcontractor manufacturing or quality control issues.
- Coordinate development and compilation of subcontracting and manufacturing customer required data packages for submittal to clients.
- Assist in audits and surveillance inspections at subcontractors as requested.
- Assists in planning inspections.
- Travel may be required, including international assignments.
- A Bachelor's degree of Engineering or Science study at an accredited University. Welding or Metallurgy degree is preferred.
- A knowledge of general steel fabrication practices, particularly welding and heat treatment, applicable to Vogt Power International products at a level typically possessed by an individual with 5 years of experience.
- Thorough knowledge of relevant manufacturing codes including the ASME Section I, VIII, B31.1, AISC codes and AWS D1.1.
- Experience in quality control related activities and have the ability to obtain lead auditor certification.
- Good verbal and written communication skills to clearly communicate project quality requirements and findings to customers, suppliers and within Vogt.
- Computer experience with knowledge of Microsoft Word, Excel, Outlook, PowerPoint, Visio or equivalent process flow software.
- Thorough knowledge of materials (heat treatment, testing, service applications) applicable to Vogt Power International product that includes carbon steels, low alloy steels, 9Cr steels and duplex stainless steels.
- Ability to handle multiple projects simultaneously and respond quickly to deadlines and problems requiring immediate action.
- This Quality Engineer may be required to travel oversea, including international assignments.
- Office Location: MD Tower Bangna.
- We are only considering candidates who are local to the position location and already have the legal right to work in that country. Please note that the company does not provide visa sponsorship, work permit sponsorship, or relocation assistance for this position.
- Health Insurance Benefits including Major Medical, Outpatient, Clinical and Maternity coverage including spouse and children.
- Employee & Spouse &Kid Dental Benefits: 5000 THB/Year.
- Life Insurance.
- Travel Insurance while travelling on company business.
- Accidental Death and Dismemberment Benefits.
- Total Permanent and Disability Benefit.
- Paid Holidays.
- Ten days paid vacation.
- Provident Fund.
- Health insurance for your kid and spouse.
- Annual Heath Check up.
- Company Trip.
- Flexible working hour.
- Free parking lot.
- Overtime paid.
13 days ago
See morekeyboard_arrow_down
Experience:
5 years required
Skills:
Meet Deadlines
Job type:
Full-time
Salary:
฿100,000 - ฿108,333, negotiable
- Manages and leads the technical aspect of the assigned projects during contract execution.
- Review and/or checking of Control Drawings.
- Documents all project information and controls the "project file". Contents include design calculations, correspondence, purchase orders, drawing schedule, external supplier and subcontractor drawings and operating instruction book data.
- Development and coordination of O&M manual as required.
- Works and communicates effectively with the Project Manager, Engineering Discipline Managers and other departments to achieve project objectives.
- Conducts and participates in team meetings, meetings with support personnel, and meetings with the customer to provide up-to-date project status reports/submittals in order to anticipate and solve project issues.
- Maintains a project's engineering schedule for all assigned projects by coordinating tasks with Discipline Managers and project team personnel to account for changes in the specification and inputs from Vendors and other departments.
- Manages project specifications and communicates the impact of specification changes on project estimate and schedule to the appropriate groups.
- Assists in developing and maintaining project man-hour forecasts.
- Attends engineering meetings providing resource requirements for engineering.
- Assists in review of customer technical specifications and commercial terms & conditions to ensure compliance or address noncompliance as required.
- Provides on-site support to vendors, and manufacturing.
- Represents the Engineering Department internally and externally as directed, including traveling when needed.
- Facilitates required design improvements/innovation projects based on customer inputs.
- Review proposals, RFQ's, proposal schedules and technical reports.
- Bachelor's degree in mechanical, chemical or metallurgical Engineering or closely related field, preferred. Demonstrated knowledge and technical competency based on past performance may substitute for degree.
- Demonstrated excellent written, verbal and interpersonal communication skills.
- Demonstrated knowledge of company standards and applications.
- Knowledge of various codes (ASME BPVC.I, NBIC, B31.1, etc.) desirable, including product application.
- Demonstrates a working knowledge of HRSG or boiler operations, design philosophy, principles and details of application.
- Minimum 5-8 years of experience in project engineering of HRSG, Boiler or power plant projects.
- Experience with reading, understanding and adhering to customer specifications.
- 3-5 years of experience leading a technical team.
- Must be resourceful, organized and able to work under pressure in order to meet deadlines, manage multiple projects simultaneously and respond quickly to requests.
- Office Location: MD Tower Bangna.
- We are only considering candidates who are local to the position location and already have the legal right to work in that country. Please note that the company does not provide visa sponsorship, work permit sponsorship, or relocation assistance for this position.
- Health Insurance Benefits including Major Medical, Outpatient, Clinical and Maternity coverage.
- Dental Benefits.
- Family Health Insurance.
- Company-paid Life Insurance.
- Travel Insurance while travelling on company business.
- Accidental Death and Dismemberment Benefits.
- Total Permanent and Disability Benefit.
- Paid Holidays.
- Vacation.
- Provident Fund.
- Overtime paid.
13 days ago
See morekeyboard_arrow_down
Experience:
2 years required
Skills:
Good Communication Skills
Job type:
Full-time
Salary:
฿70,106 - ฿83,333, negotiable
- Perform flexibility analyses for piping systems to ensure stresses are within code allowable limits.
- Develop piping models which include all physical properties of the piping, its contents, and insulation.
- Locate and design pipe supports and restraints which maintain static equilibrium and minimize stresses.
- Work directly with our design group to ensure the detailed support designs are created accurately and on schedule.
- Work directly with our Piping Designers, Structural Engineers, Product Engineers, Project Engineers, Lead Designers, and others to ensure pipe routing and equipment access is optimized and that loads are properly addressed where piping interfaces with equipment or supports interface with the main structure.
- Use hand calculations, internal spreadsheets, programs, or other tools to determine or validate miscellaneous expansions, stresses, loads, and support designs.
- Perform dynamic analyses to determine loads originating from safety valve opening, steam turbine trip, or other dynamic events.
- Create lists, requisitions, and review quotes to support the procurement of pipe support material.
- Communicate and coordinate with BPTL's customer (or customer's representative) to ensure BPTL's piping scope interfaces properly with the customer's piping scope.
- Provide organized and well written reports to describe assumptions, steps taken, and results from work performed.
- Provide leadership by learning, developing, and coordinating new techniques, standardizing procedures, and providing technical instruction and mentoring to department staff.
- Participate in project team and client meetings, as needed.
- Follow all company and department ISO procedures and work instructions.
- Perform other duties as assigned.
- Office Location: MD Tower Bangna.
- We are only considering candidates who are local to the position location and already have the legal right to work in that country. Please note that the company does not provide visa sponsorship, work permit sponsorship, or relocation assistance for this position.
- Bachelor of Science in an engineering related field with emphasis on statics, dynamics, stress analysis and/or Finite Element Analysis.
- 2+ years of experience in piping engineering, pipe stress analysis, power plant, oil & gas, petrochemical, industrial plant, or related engineering fields preferred. Experience with Heat Recovery Steam Generators (HRSG) is an advantage.
- Experience in operating Caesar II or AutoPipe piping analysis software preferred.
- Proficiency with Microsoft Excel.
- Prior knowledge of ASME Boiler & Pressure Vessel Codes, with an emphasis on B31.1 is preferred.
- Good communication skills and ability to work well in a team environment.
- Health Insurance Benefits including Major Medical, Outpatient, Clinical and Maternity coverage including spouse and children.
- Employee & Spouse &Kid Dental Benefits: 5000 THB/Year.
- Life Insurance.
- Travel Insurance while travelling on company business.
- Accidental Death and Dismemberment Benefits.
- Total Permanent and Disability Benefit.
- Paid Holidays.
- Ten days paid vacation.
- Provident Fund.
- Health insurance for your kid and spouse.
- Annual Heath Check up.
- Company Trip.
- Flexible working hour.
- Free parking lot.
- Overtime paid.
13 days ago
See morekeyboard_arrow_down
Experience:
5 years required
Skills:
Procurement, Microsoft Office, Meet Deadlines, English
Job type:
Full-time
Salary:
฿75,000 - ฿79,167, negotiable
- Support the Proposal/ Estimating teams with current market pricing and lead times through transmittal of RFQ's as required.
- Manage RFQ process for products and services. Lead evaluation of quotations, including resolution of commercial and technical exceptions to assure that technical, quality, delivery and price objectives are met. Ensure all commercial documents have been conformed / revised to final agreed set of terms and conditions prior to award. Communicate award to suppliers.
- Attend the kickoff/ pre-fabrication meeting with suppliers.
- Understand and track the scope of supply, delivery dates, technical requirements and shipping terms for each purchase order. Communicate information such as drawings, schedules, shipping information, and changes in scope (drawings, specifications and schedule changes).
- Communicate and resolve changes on scope, pricing, delivery or supplier capabilities with the Project Team.
- Frequently review status reports from the vendors and validate that the actual progress matches what is being reported.
- Support Quality Assurance/ Control initiatives and requests relating to supplier.
- Review the supplier's packing list to ensure that scope of supply is complete prior to shipment.
- Coordinate with Logistics Department for required shipping release.
- Assist Supply Management in locating and developing new suppliers and fabricators for materials and components.
- Make visits to potential suppliers to assess their capabilities.
- Attend/ oversee cargo loading at the Port.
- Maintain knowledge of current market conditions for commodities/products including monitoring supplier shop capacity.
- Maintain good communications and working relationships with personnel of other departments, suppliers, and subcontractors to ensure successful completion of projects.
- Navigate and update Corporate Supplier Listing.
- Report problems needing Management attention/ intervention during department meetings or as necessary.
- Bachelor's degree in business, Logistic, Engineer or related field from an accredited university.
- 5-10 years in Energy or Oil and Gas, EPC Procurement experience or related industry experience.
- Fluent reading, writing and speaking in English language is required.
- Able to travel international short-term assignments including the USA.
- Experience in managing subcontracts and fabrication or other procurement-related activities.
- Strong knowledge of commercial terms.
- Experience with quality process, fabrication and logistics.
- Knowledge of scheduling practices.
- Knowledge of general steel fabrication management practices applicable to HRSG design.
- Knowledge of suppliers and equipment applicable to Energy Industry.
- Demonstrated excellent analytical and computer skills including Microsoft Office, Word and Excel.
- Must be organized and able to work under pressure in order to meet deadlines, manage multiple initiatives simultaneously and respond quickly to requests.
- Health Insurance Benefits including Major Medical, Outpatient, Clinical and Maternity coverage including spouse and children.
- Employee & Spouse &Kid Dental Benefits: 5000 THB/Year.
- Life Insurance.
- Travel Insurance while travelling on company business.
- Accidental Death and Dismemberment Benefits.
- Total Permanent and Disability Benefit.
- Paid Holidays.
- Ten days paid vacation.
- Provident Fund after probation.
- Health insurance for your kid and spouse.
- Annual Heath Check up.
- Company Trip.
- Flexible working hour.
- Free parking lot.
26 days ago
See morekeyboard_arrow_down
Benefits
Interesting Companies
WorkVenture gives you an inside look at what it's like to work at Babcock Power (Thailand) Co., Ltd.aaaa, office & team photos, reviews and more. This is the Babcock Power (Thailand) Co., Ltd.aaaa Company Page. All content is posted anonymously by employees currently or previously working at Babcock Power (Thailand) Co., Ltd.aaaa.Apply to BaraApply to Groove DesignApply to MattelApply to Freakout
