ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Data Entry

ประเภทงาน:

งานประจำ

• Design, develop, and implement new manufacturing processes to support customer products.
• Develop application software and tooling for a comprehensive set of complex machines and mechanical process steps within a manufacturing sector.
• Implement plan and lead the assessment of the capability of machines and process applications using Design of Experiments and statistical methods across the full manufacturing process, ensuring maximum utilization of critical resources, maximum through ...
• Lead disciplined process for solving complex single stage or multistage product, process, component, and related problems that affect the efficient operation and/or manufacture of products through the full manufacturing process.
• Initiate and lead the assessment and provide feedback to product designers on suitability of designs for manufacturability.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Electronics, Excel, Data Entry

ประเภทงาน:

งานประจำ

• Good knowledge of an electronics manufacturing environment, material and processes.
• Good understanding of specific customers' business, organization, products and processes.
• Knowledge of basic computer applications such as WORD, Excel, PowerPoint and multiple business applications.
• Good presentation skills.
• Good analytical and statistical skills.
• Good leadership and coaching skills.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional overnight travel may be required.
• Typical Experience.
• Four to six years of relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience. Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Finance, Internal Audit, Cost Analysis

ประเภทงาน:

งานประจำ

• Runs the company reporting office to map & identify all reporting activities and formats and reporting structure.
• Identifies reporting contributors & stakeholders, data sources with target to remove redundancies, simplify, automatize and measure reporting efficiency.
• Optimizes reporting calendars.
• Lead or support or lead cross-functional projects as Finance department representative. These projects will be in areas of:CAPEX payback.
• Process improvement.
• MDM projects.
• Internal controls mitigating actions (internal audit dependencies).
• Cost analysis.
• New business integration.
• Act like business partner for functional Directors (Procurements, SCM, IT ) to facilitate cost analysis, competitive quotes and cost savings activities.
• Site business partner for NPI controlling.
• CAPEX controlling.
• Disengagements, Disposal, Impairment tests.
• Perform ad-hoc financial analysis as required.
• Knowledge/Skills/Competencies.
• Bachelor s degree in Finance, Accounting, Economics, or a related field.
• 3+ years of experience in FP&A, Finance, Accounting or related financial roles.
• Strong analytical skills with a demonstrated ability to interpret data and provide actionable insights.
• Expertise in financial modeling, budgeting, forecasting, and variance analysis.
• Advanced proficiency in Excel and experience with financial software (Oracle Hyperion Financial Management, Long View ).
• Excellent communication and presentation skills, with the ability to interact effectively with senior leadership.
• Experience in process improvement and automation within finance functions, leveraging technology such as RPA (Robotic Process Automation) or financial software.
• Project management skills and ability to work in a cross-functional team environment and manage multiple stakeholders.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Electronics

ประเภทงาน:

งานประจำ

• Provide tester support to production.
• Monitor product test yields and feedback to related parties for corrective action in a prompt and timely manner.
• Collaborate with Debug team to find root cause of low yields.
• Verify that test equipment (hardware & software) is in proper working condition, and not the root cause of low yields.
• Participate in continuous improvement programs to improve test yield and reduce scraps.
• Document, control and maintain existing test production hardware and software (Including routine preventive maintenance and calibration on test equipment).
• Set up new test equipment (hardware & software), buy-off procedure before releasing to production.
• Document and update the test procedures. - Provide training of test process to production team.
• Provide training to functional test technicians on how to confirm test failures and maintain test equipment.
• Perform test line conversion (when applicable).
• Maintain in house test fixture.
• Review overall ICT test capacity of TEST ICT capacity vs demand analysis.
• Review ICT test requirement of NPI product.
• CCB coordinator.
• Perform other work-related assignments requested by supervisors.
• Change Management, ECO, limits, test steps, FW and ID programming.
• Knowledge/Skills/Competencies.
• Interpreting test requirements and documenting test procedures.
• Analyzing data to drive coverage enhancement and first pass yield improvement.
• Experience in Agilent 3070 and Flying Probe test platform supports/maintains.
• Capable to do test development on the Agilent 3070 machine and Flying Probe test platform.
• Ability to lead engineering projects and share the results.
• Typical Experience.
• Min. 5 years of hands-on working experience in large-scale In-circuit MFG ICT test support.
• Typical Education.
• Engineering Degree in Electronics or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Procurement, Contracts, Negotiation

ประเภทงาน:

งานประจำ

• The incumbent coordinates and controls the design and execution of sourcing projects within the Facilities category, including fit-up constructions, repairs, security services, cleaning services, cafeteria, and landscaping, within indirect procurement..
• They build relationships with internal and external customers and users of the optimization process. Working in a team setting with minimal supervision, this role provides internal customers/stakeholders with the support and guidance needed to create a ...
• They are responsible for driving value from strategic vendors, reducing related costs, and improving cash flow while adding value to the organization..
• This includes developing category strategies and negotiating contracts (reviewing, drafting, and redlining) from vendor contract receipt through deal closure, subject to final approval by in-house counsel..
• They lead stakeholders through the entire procurement process, from requirement definition to vendor engagement, RFQ process, and the completion and negotiation of operational contracts..
• The incumbent interacts regularly with senior management on matters concerning various functional areas, divisions, and customers. They identify future procurement projects for management by collaborating with stakeholders on category strategies..
• They co-develop and execute sourcing strategies with the business, advising and guiding the process to the best-fit approach, tactics, and tools (e.g., outcome-based specifications, RFP/RFI/RFQ builds, e-auctions, KPI/SLA development)..
• They also act as the site liaison for the Global Commodity Management team with specific global locations. The operational environment is cross-functional, complex, and fast-paced, requiring a high degree of judgment and independence to develop solutions and resolve challenges..
• Strong cross-functional relationship management, persuasive skills, and negotiation skills are essential for gaining support and buy-in..
• Knowledge/Skills/Competencies.
• Strong business acumen with the ability to create and analyze cost-benefit analysis proposals and advise business leaders, finance, and procurement on the strengths of various options.
• Excellent negotiation, relationship, and interpersonal skills.
• Strong ability to communicate with stakeholders and business leaders to understand requirements, expectations, and value measures.
• Strong analytical skills, proficiency in Microsoft Office applications (Excel, PowerPoint, Word). Advanced Excel (macros a plus) and MS Word skills are required.
• Category Management and Sourcing experience, including a deep understanding of Strategic Sourcing best practices.
• General commercial contracts and procurement experience with strong substantive knowledge and experience in drafting and negotiating a wide variety of contract provisions.
• Ability to work within a team and, where appropriate, independently or with limited guidance.
• Solid experience in face-to-face negotiations and project management.
• Ability to lead complex negotiations effectively.
• Experience creating and implementing SLAs and KPIs.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Typical Experience.
• Minimum of 8 years of procurement experience, preferably in the manufacturing industry with expertise in Facilities/MRO.
• A minimum of 5 years of experience managing complex contracts and relationships, including contract commercials and business relationships, with experience in outsourcing vendor contract negotiations, terms, SLAs, invoicing, and dispute management.
• Category Management and Sourcing experience, including a deep understanding of Strategic Sourcing best practices.
• Project management experience is required.
• E-procurement tool experience is an asset.
• Typical Education.
• Bachelor s degree in business administration, engineering, or a procurement-related field, or equivalent combination of education and experience.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Data Entry

ประเภทงาน:

งานประจำ

• Design, develop, and implement new manufacturing processes to support customer products.
• Develop application software and tooling for a comprehensive set of complex machines and mechanical process steps within a manufacturing sector.
• Implement plan and lead the assessment of the capability of machines and process applications using Design of Experiments and statistical methods across the full manufacturing process, ensuring maximum utilization of critical resources, maximum through ...
• Lead disciplined process for solving complex single stage or multistage product, process, component, and related problems that affect the efficient operation and/or manufacture of products through the full manufacturing process.
• Initiate and lead the assessment and provide feedback to product designers on suitability of designs for manufacturability.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Teamwork, Project Management, Problem Solving

ประเภทงาน:

งานประจำ

• Engage with community to explore opportunities for the use of IT solutions.
• Gather and document business requirements.
• Work with various IT teams to develop and deliver IT solutions.
• Respond to system problems by analyzing the issue and determining the next course of action.
• Provide system training to end users.
• Participate in and lead various IT projects as required.
• Knowledge/Skills/Competencies.
• Strong customer service orientation.
• Leadership and teamwork skills.
• Good ability to plan projects and tasks.
• Project management skills.
• Good analytical, technical, troubleshooting and problem solving skills.
• Good communication, documentation (including flow charting) and presentation skills.
• Understanding of an electronic manufacturing environment, materials and processes.
• Understanding the machine connectivity protocol likes CFX, SECGEM, REST, PLC Bases protocol.
• Understanding the integration of technologies into the production process to make plant operations more flexible, efficient and resilient in the face of changing market demands. To build better digital solutions in the company.
• Understanding of shop floor control and ERP applications.
• Solid knowledge of the business area to be supported and a solid understanding of its associated business processes.
• Strong understanding of software development life cycle concepts and practices.
• Knowledge/experience with application-to-application and business-to-business integration.
• Basic to good coding skills in specified programming languages.
• Understanding of interrelations between IT components (software, OS, databases, network, servers, etc.).
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Typical Experience.
• 4 to 6 years; Experience in similar roles.
• Typical Education.
• Bachelor Degree or consideration of an equivalent combination of education and experience..
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Product Design, Procurement, Electronics

ประเภทงาน:

งานประจำ

• Support development of production test strategies based on product design specification.
• Develop test plans and requirements for customer products including both hardware and software elements.
• Lead the procurement, qualification, and installation support for manufacturing for a large customer.
• Be accountable for the test process optimization with a focus on productivity improvements to cycle time and yield within a CFT or across a large equipment set serving multiple customers.
• Provide project leadership, including management of (and communication with) team members, suppliers for comprehensive test deployments including structural, functional, system, stress and final test applications for a large customer.
• Support sales process by providing support to the quoting process.
• Work with Design to enhance solutions with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keep up to date with relevant industry knowledge and regulations.
• Lead and drive complex problems related to product yield or test performance.
• Support sales process by providing support to the quoting process.
• Set yearly plans and goals for the department, give direction on expected performance, provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Over 8 years of working experience in Test Manufacturing in Electronics industry.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Research, Product Design, Python, English

ประเภทงาน:

งานประจำ

• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality, and test requirements outlined in the test plan..
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focusing on cycle time and yield..
• Project lead for test development, Work across / coordinate with external and internal team including reviews of their work..
• Coaching team and bring up team skill sets related to test development.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience..
• Work overseas for tester commissioning and transfer to site, including face-to-face business meetings..
• Creates technical proposals (solutions and timelines) based on requirements.
• Provide high-level test hardware and software solution architecture.
• Reviews and interprets customer documentation, conducts appropriate research, analysis and experiments with minimal direction from senior staff..
• Create a structural or functional test strategy and test plan to meet project goals and requirements.
• Create technical proposals with costed BOM and hours estimates.
• Create product test requirements with guidance from senior staff and collaboration with customer designers.
• Provides Technical program management for small projects.
• Knowledge/Skills/Competencies.
• Experience and understanding of the overview of Electronic manufacturing processes/requirements or related industries.
• Ability to conduct the Electronic circuit design/analysis and do problem solving related to electronic components.
• Ability to perform Software development by using NI TestStand and LabVIEW.
• Preferred] Has basic knowledge of Python, C#, C, C++, Linux, and database(SQL).
• Preferred] Has basic knowledge of PLC..
• Preferred] Has basic knowledge of RF test solution.
• Good command of English and Thai for communication.
• Experience in test fixture design. Mechanical design review.
• Experience in test verification and validation using cpk, GR&R analysis, MSA, and other related tools.
• Ability to manage change requests.
• Leadership personality, able to lead team to meet the target and work across team function and negotiation skills.
• Ability to manage a sing-line engineering project with a limited number of participants.
• Typical Experience.
• 8 years experience in Test Development or related field.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Excel, Visio, Project Management

ประเภทงาน:

งานประจำ

• Drives the development and execution of a comprehensive talent acquisition strategy aligned with the site's business goals and the global talent strategy. Considering a scope for external recruitment and internal selection processes.
• Builds and maintains a robust pipeline of qualified candidates for current and future needs, utilizing innovative sourcing and engagement strategies.
• Leverages talent analytics and metrics to inform strategy, evaluate effectiveness, and drive continuous improvement.
• Cultivates a strong employer brand that resonates with top talent and positions Celestica as an employer of choice.
• Collaborates closely with HR Business Partners, hiring managers, and other key stakeholders to understand talent needs and ensure alignment throughout the recruitment process.
• Provides expert consultation and guidance on talent acquisition best practices, policies, and procedures.
• Provides leadership and guidance to junior talent acquisition staff, fostering a high-performing and engaged team.
• Ensures alignment with global resourcing strategies, goals, and standards, contributing to a cohesive global talent acquisition function.
• Leads and supports change initiatives related to talent acquisition processes, technology, and strategy.
• Develops the overall resourcing strategy for the site, from both a recruitment and internal staffing perspective and may provide leadership and guidance to junior resourcing staff.
• Acts as the functional expert and consultant to both HR and hiring managers in the region on all resourcing initiatives which impact Celestica's ability to attract and retain high calibre employees.
• Ensures that monthly resourcing reports are rolled up to the appropriate regional level for consolidation globally.
• Align the team's activities with the overall talent acquisition strategy, defining clear performance expectations and metrics for success.
• Encourage knowledge-sharing, innovation, and a learning mindset within the team.
• Manage workload distribution, ensuring efficient utilization of resources and balanced workloads across the team.
• Knowledge/Skills/Competencies.
• Sound knowledge of government legislation impacting the practice of human resources management.
• Sound knowledge of the company HR policies and practices, particularly the global and regional staffing policies.
• Ability to consult with a wide variety of internal customers and provide an end-to-end resourcing service.
• Ability to develop appropriate staffing strategies for a variety of needs including recruitment projects for a whole unit or division, as well as assisting individual managers with open positions up to and including Manager levels.
• Ability to conduct thorough behavioral interviews up to and including Manager levels.
• Ability to project manage and time manage effectively to ensure timely closure of open positions.
• Ability to manage sensitive employee information in a confidential manner.
• Knowledge of computer applications and the ability to accurately perform tasks in some or all of the following applications: Access, Excel, Word, PowerPoint, Microsoft Project, and Visio and Applicant Tracking software.
• Intermediate level of proficiency in most of the Personal Attributes and Interpersonal Competencies, as well as intermediate proficiency in two Business Competencies, Project Management and Organizational Awareness (refer to the Celestica Competency Framework).
• Typical Experience.
• Over 10 years of recruiting of Engineering area.
• Typical Education.
• Bachelor s degree in a related field, or consideration of an equivalent combination of education and experience.
• Engineering field would be an advantage.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Assembly, Data Entry

ประเภทงาน:

งานประจำ

• Design, develop, and implement new manufacturing processes to support customer products.
• Develop application software and tooling for a comprehensive set of complex machines and mechanical process steps within a manufacturing sector.
• Implement plan and lead the assessment of the capability of machines and process applications using Design of Experiments and statistical methods across the full manufacturing process, ensuring maximum utilization of critical resources, maximum through ...
• Lead disciplined process for solving complex single stage or multistage product, process, component, and related problems that affect the efficient operation and/or manufacture of products through the full manufacturing process.
• Initiate and lead the assessment and provide feedback to product designers on suitability of designs for manufacturability.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

7 ปีขึ้นไป

ทักษะ:

Teamwork

ประเภทงาน:

งานประจำ

• Deploy the continuous improvement (CI) goals and strategies by applying the Improvement principles, systems, methods and tools for the operation and support functions in the organization.
• Contribute to the yearly CI activities execution plan and ensure that project goals are met.
• Work closely with key business stakeholders to build a CI environment to support a change management program.
• Participate in and/or lead the management gemba ( go and see ) activities.
• Participate in and/or co-lead the site/function CI Committee.
• Facilitate the adoption and measurement of the Systematic CI Framework Standards.
• Facilitate lean and process improvement based CI workshops to drive ideas and solutions.
• Facilitate improvement opportunities external to the site/function (as required). This may involve the delivery or training and/or kaizen facilitation at external organizations outside Celestica + other sites in the Celestica network that need help + global support functions within Celestica.
• Collaborate with regional and corporate CI teams for the Continuous Improvement activities execution.
• Work closely with all area owners to create a culture of continuous improvement.
• Drive new ideas and improvement solutions with all area owners and share good practices between customers, departments, sites and functions.
• Champion the Reward and Recognition programs to motivate all employees.
• Lead large projects that involve solving complex problems where analysis of situations or data requires an in-depth evaluation of multiple factors to reduce/eliminate variation and/or waste.
• Support value stream improvements and/or transformation efforts. Provide subject matter expertise on an as needed basis. Provide training for CI for Employees and CI for Leadership certifications and Lean Green Belt and Six Sigma Green Belt certifications, if applicable.
• Work to achieve Lean Black Belt and Six Sigma Black Belt certifications.
• Knowledge/Skills/Competencies.
• Proven competency to deliver training, facilitate kaizen events and drive business results through application of CI methods.
• Hands-on experience in delivering multiple kaizen types.
• Experience in key facets of complex manufacturing environments, operations and high performance work, such as Lean Manufacturing leadership.
• Project & Change management experience.
• Time management.
• Proven ability to work effectively at all levels of the organization.
• Leadership experience within a matrix organization.
• Collaboration.
• Communication.
• Planning.
• Problem solving.
• Results oriented.
• Leadership.
• Teamwork.
• Initiative.
• Flexibility.
• Physical Demands.
• Duties of this position are performed in generally good conditions with occasional exposure (10% - 33%) to noise, odours, dust, drafts, chemicals, operating machinery, temperature extremes, hazardous substances, etc.
• Duties may require regular periods of sitting and/or standing and sustained visual concentration on observing operations. Repetitive manual movements (e.g. data entry, using a computer mouse, using a calculator, time studies, assembling workstations/racking, labeling, floor taping, etc., as applicable) are regularly required.
• Occasional overnight travel is required.
• Typical Experience.
• 5 to 7 years of relevant experience.
• CI experience in manufacturing and office environments.
• Typical Education.
• Bachelor Degree or consideration of an equivalent combination of education and experience.
• Specialized Knowledge / Skills.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Assembly, English

ประเภทงาน:

งานประจำ

• New product leader and co-ordinate..
• Communicate to customer for EC related issue and NPI activities..
• Co-ordinate with concern team to meet the customer product's requirements..
• Co-ordinate with concern team to Process BOM release in Matrix system..
• Generate ECN history of Optical Module and PCBA for traceability..
• Assign indirect mat'l and maintain indirect mat'l AVL..
• Process Change Management system..
• Manage the shop floor BOM for support production build..
• Cost reduction..
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Optical Components process assembly, splicing, die attach, alignment or PCBA process assembly experience in SMT, wave soldering and mechanical assembly..
• Knowledge in NPI, new product, new process, BOM.
• Good leadership and self-motivation.
• Good in English and communicate well..
• Typical Education.
• Bachelor or higher in Electronics or Mechanical Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Data Entry

ประเภทงาน:

ฝึกงาน

• Fulfills requirements of University or College Internship program in a Support function whereby the duties are categorized as "Indirect" labour.
• Duties fulfill the requirements of the specific internship program.
• Knowledge/Skills/Competencies.
• Enrolled in a formal University or college Internship program.
• Physical Demands.
• Duties of this position are performed in a normal office with exposure to manufacturing environments.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements are frequently required (e.g. data entry, using a computer mouse, using a calculator, etc).
• Basic manufacturing system knowledge.
• Typical Experience.
• No formal experience is required.
• Typical Education.
• University or College program in progress.
• Education experience may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Budgeting, Problem Solving, Compliance

ประเภทงาน:

งานประจำ

• Assesses and ensures mitigation of organizational risk in regards to Quality events or potential events.
• Has overall responsibility for planning, budgeting, implementing and maintaining costs, methods and resources including employees in the quality function.
• Leads the organization in developing and executing a Quality strategy that ensures long term customer satisfaction, site and corporate goals are achieved or exceeded, including regular reviews on progress.
• Provides direct and indirect leadership and mentorship to subordinate managers and employees for effective development and execution of skills such as Leadership Development, Problem Solving 8D Methodology, Compliance Procedures, Change Control Board, FMEA, Manufacturing Quality Standards (MQS) and Flawless Launch Phase Gate Reviews.
• Develops and conduct reviews with key customer and suppliers to ensure that quality requirements are aligned and achieving defined level of customer satisfaction and managing any associated contractual LD risks.
• Provides leadership and support for compliance readiness to various customer, regulatory standards and certifications (i.e ISO9001, TL9001, AS9100, ISO13485, ISO14001, ANSI/ESD, etc.).
• Collaborates with site leadership to support the activities necessary to achieve Celestica Operating System processes and metrics and ensure on going development of a Quality culture.
• Knowledge/Skills/Competencies.
• Excellent knowledge of quality management systems and processes (i.e ISO9001, TL9001,.
• AS9100, ISO13485, ISO14001, ANSI/ESD, etc.).
• Broad knowledge of an electronic manufacturing environment, materials, manufacturing and business processes.
• Excellent analytical, negotiation and problem resolution skills.
• Ability to establish department goals and coordinate a wide variety of resources to meet quality and quantity metrics.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train and motivate a diverse group of employees to achieve high production within tight time deadlines.
• Ability to as a champion for Quality culture and Critical process development and ongoing adherence.
• Ability to define and manage large multi departmental change process's to project objectives.
• Physical Demands.
• The job works in generally good conditions with occasional exposure (10% - 33%) to noise, odours, dust, drafts, chemicals, operating machinery, temperature extremes, hazardous substances, etc.
• Duties may require sustained visual concentration on small areas, such as monitors/screens, and sustained visual concentration on numbers/legal documents.
• Typical Experience.
• 11 to 14 years.
• Typical Education.
• Bachelor's degree in related field or consideration of an equivalent combination of education and experience.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Risk Management, Compliance, Problem Solving

ประเภทงาน:

งานประจำ

• Provide technical support and perform maintenance.
• Perform service monitoring and reporting, with a focus on risk management and compliance.
• Explore new solutions, enhancements and opportunities for continuous improvement, projects and more.
• Perform the acquisition, provisioning and decommissioning of related equipment, software and services.
• Lead projects and change management initiatives.
• Knowledge/Skills/Competencies.
• Strong customer service orientation.
• Strong analytical, troubleshooting and problem solving skills..
• Good communication (both oral and written) and documentation skills..
• Leadership and teamwork skills..
• Ability to plan projects and tasks..
• In-depth knowledge of the Windows OS (server and client) and the desktop operating environment. Linux and other mainstream OS knowledge will be helpful..
• Fundamental knowledge of networking concepts.
• Strong knowledge of infrastructure service management & diagnostic tools and processes.
• Strong knowledge of end-point security management tools and processes.
• Physical Demands.
• Duties of this position are performed in a normal office environment..
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required..
• Typical Experience.
• 4 to 6 years of relevant experience.in a similar role or industry..
• Typical Education.
• Bachelor's Degree or consideration of an equivalent combination of education and experience..
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Negotiation

ประเภทงาน:

งานประจำ

• Remote Position: No
• Region: Asia
• Country: Thailand
• State/Province: Chonburi
• City: Laem Chabang.
• General Overview.
• Functional Area: Supply Chain Management (SCM)
• Career Stream: Purchasing (SCM_PUR)
• Role: Support 7
• Job Title: Buyer Sourcing
• Job Code: SU7-SCM-BYS
• Job Level: Level 07
• Direct/Indirect Indicator: Indirect.
• Summary.
• Detailed Description.
• Knowledge/Skills/Competencies.
• Physical Demands.
• Typical Experience.
• Typical Education.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

SAP, Problem Solving, Teamwork

ประเภทงาน:

งานประจำ

• Support and communicate with stakeholders including IT/Business Partners as well as external/internal communities for opportunities and or alignment of solution strategy.
• Support in providing solution architecture as well as guidance in the selected area of responsibility (e.g. Shop floor, IT, SCM, Ops, etc.).
• Provide guidance in IT Process (e.g. Operating Model, Governance, System Development Life Cycle).
• Support in providing guidance on relevant technologies and concepts (e.g. Azure, Cloud Tech,.NET, SAP/ABAP, etc.).
• Perform technical execution of solutions including requirements gathering, blueprinting, development and deployment.
• Manage a small team of permanent and contractor staff, performing tasks including onboarding, off boarding, training.
• Knowledge/Skills/Competencies.
• Strong knowledge & experience in IT process (e.g. operating model, governance, IT delivery lifecycle).
• Strong knowledge & experience in select business processes (e.g. Shop floor, IT, SCM, Ops, etc.).
• Strong knowledge & experience in relevant technologies and concepts (e.g. SAP, xAAS,.NET, Azure, etc.).
• Ability to make or guide decisions, and drive team actions in accordance with strategy..
• Good problem solving & analytic skillset, with an ability to innovate..
• Good relationship management and negotiations skills..
• Strong knowledge & experience in Agile and Waterfall development/project methodologies.
• Advanced knowledge of Celestica IT architecture strategies.
• Good leadership and teamwork skills..
• Good project management & planning skills..
• Strong interpersonal and human resource management skills.
• Physical Demands.
• Duties of this position are performed in a normal office environment..
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required..
• Typical Experience.
• 4 to 6 years of relevant experience in similar roles.
• Typical Education.
• Bachelor Degree or consideration of an equivalent combination of education and experience..
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Compliance, Project Management, Industrial Engineering

ประเภทงาน:

งานประจำ

• Responsible for the production of site utilities (gas, water, electricity) to produce steam, chilled water, de-ionized water and compressed air for manufacturing.
• Ensures facility is always in compliance with all local and government regulations.
• Provides technical direction to facilities staff and directs same in non-routine work as applicable.
• Works with management and technical staff to formulate plans on equipment placement and replacement as necessary.
• Coordinates contract services, inspections and audits as necessary.
• Manages multiple projects varying in complexity using solid project management skills and tools.
• Drives the supplier/contractor selection process and ensures that all orders/requisitions are places with all the necessary drawings, specifications and documentation.
• Monitors and reports progress status of projects along with quality, schedule, safety, security, productivity, administration, worksite appearance to site management team and evaluates contractors on these aspects.
• Ensures compliance to ISO 14001 Environmental Management System Standards.
• Manages and directs EHS functions such as: occupational health, claims management, industrial hygiene, safety, hazardous materials, hazardous waste management, pollution prevention, and ergonomics.
• Ensures compliance with applicable government EHS regulations.
• Develops new programs to meet new/revised regulations.
• Collaborates at all levels in site planning, including reviewing proposed and existing processes and equipment and making recommendations.
• Performs periodic reviews of EHS programs and initiatives to identify and control risks.
• Responsible for the design, deployment, implementation and support of Celesticas Energy Management.
• Works with all Celestica Corporate and Celestica sites Energy staffs to meet its energy objectives and to develop implementation schedules and ongoing support plans and provides support and leadership through completion of the plan.
• Knowledge/Skills/Competencies.
• Engineering Foundation Competencies.
• Knowledge of Industrial hygiene, Environmental, Health and Safety programs and regulations including ISO 14001.
• Knowledge of Industrial Engineering standards.
• In-depth knowledge of structural and facilities engineering and manufacturing processes.
• Ability to evaluate, diagnose and troubleshoot problems.
• Strong knowledge of IT platforms, database design and programming languages.
• Strong knowledge of some or all of the following: UNIX, NT, database management system.
• Ability to evaluate materials, gather and analyze data and determine root cause of problems.
• Ability to manage several projects simultaneously and coordinate multiple, changing deadlines.
• Ability to effectively communicate with a variety of internal and external customers.
• Physical Demands.
• Duties of the position are performed in a manufacturing environment with frequent exposure to noise, dust, chemicals, operating machinery, temperature extremes, hazardous substances, etc.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Typical Experience.
• Three to six years of relevant experience.
• Typical Education.
• Bachelor's degree in a related field, or an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Automation, Python, Perl

ประเภทงาน:

งานประจำ

• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Design, modify and implement systems that meet customer and Celestica needs. e.g. creation of Schematics, Bills of material, diagrams, drawings, etc.
• Keep up to date with relevant industry knowledge and regulations.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Analyse and interpret data and information.
• Recommend modifications for systems.
• Create reports and documentation.
• Knowledge/Skills/Competencies.
• Experience with Hardware development and testing with Embedded HW, FPGA, High Speed Ethernet, Chassis, Power, Regulatory, and DFT.
• Experience with bench level testing and test equipment including high speed oscilloscopes, Network analyzers, Spectrum Analyzers, and network pattern generators..
• Experience developing Software for hardware test automation with development tools such as C/C++, Python, TCL/TK, LabVIEW, and PERL..
• Strong verbal and written communication skills.
• A strong sense of ownership, urgency, and drive..
• Typical Experience.
• 0-3 years of hands-on practical and relevant work experience.
• New graduates are welcome.
• Typical Education.
• Engineering Degree or higher in Electrical Engineering, Computer Engineering, Telecommunication Engineering, Computer Science, or equivalent work-related experience.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Compliance, Accounting

ประเภทงาน:

งานประจำ

• Develops, improves and enforces compliance with documented procedures for material handling practices.
• Ensures accurate counts, packaging, handling, stock rotation, shelf-life, part identification, etc.
• Supervises the process for receiving, checking and stocking raw materials; sorting and delivering raw materials to production; and, packaging finished products and shipping to customers.
• Evaluates departmental metrics to measure performance.
• Creates reports and regular communication with regard to status of operations.
• Identifies and drives process improvements.
• Coordinates overall operation of replenishment / kitting activiites and moverment of inventory.
• Acts as primary interface with manufacturing and planning.
• Schedules materials / kits for the production line.
• Supervises material handlers and/or replenishement staff within assigned work teams.
• Assigns and schedules tasks and checks work at regular intervals.
• Provides input for employees performance reviews; recommends disciplinary action as necessary.
• Establishes a team training model and a developmental plan for each employee.
• Ensures that all employees are trained to perform effectively and efficiently.
• Reassigns personnel as necessary to optimize production.
• Meets and communicates regularly with employees regarding site safety standards, ISO standards, customer awareness training, etc.
• Interacts with peers and other departments to communicate information, resolve issues and continually improve processes.
• Attends meetings related to material status and production.
• Knowledge/Skills/Competencies.
• Knowledge of warehouse management operations and inventory control methods in a manufacturing environment.
• Knowledge of MRP (manufacturing resource planning).
• Knowledge of cost accounting practices.
• Good leadership and coaching skills.
• Ability to manage multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Physical Demands.
• Duties of this position are performed in a manufacturing environment with occasional exposure to elements such as noise, dust, chemicals, operating machinery, temperature extremes, etc.
• Duties of this position require continuous light physical effort and exertion including prolonged repetitive motion, standing, sitting in a confined work space, climbing, using equipment, handling lightweight materials, etc.
• Duties of this position require periodic heavy manual effort and considerable exertion including lifting objects over 20 pounds, requiring straining, pulling and lifting.
• Occasional overnight travel may be required.
• Typical Experience.
• Four to six years of relevant experience.
• Typical Education.
• Bachelor's degree in a related field, or an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Compliance

ประเภทงาน:

งานประจำ

• Developing and implementing employee relations strategies and policies to support the company's overall business objectives.
• Advising and guiding managers on employee-related issues, such as disciplinary actions, grievances, and performance management.
• Conducting investigations and resolving employee disputes and complaints in a fair and impartial manner.
• Collaborating with the HR team to ensure consistent and effective employee communication and engagement.
• Monitoring and interpreting changes in labor laws and regulations, and ensuring the company's compliance.
• Representing the company in negotiations with trade unions and government agencies, as required.
• Developing and delivering training programs to enhance managers' and employees' understanding of labor laws and employee relations best practices.
• Knowledge/Skills/Competencies.
• Thorough knowledge of Thai labour laws and regulations, and a deep understanding of employee rights and obligations.
• Excellent communication and interpersonal skills, with the ability to effectively negotiate and resolve conflicts.
• Strong analytical and problem-solving skills, with the ability to think strategically and make well-informed decisions.
• Proven track record of fostering positive employee-employer relationships and promoting a harmonious work environment.
• Ability to work collaboratively with cross-functional teams and to lead and mentor junior staff members.
• Typical Experience.
• Over 10 years of working experience in employee relations or labour law, preferably in the manufacturing or industrial sector.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Research, Data Entry

ประเภทงาน:

งานประจำ

• Lead the design, development and implementation of technical solutions for complex projects, involving multiple domains. Participate in project planning and scheduling.
• Takes responsibility for non-technical elements of an engineering project (people, financials etc.).
• Review and interpret customer specifications and may act as primary customer contact.
• Analyze trade-offs in complex systems and recommend solutions. Develop deployment strategies and plans.
• Lead the deployment of strategic technologies/programs and coordinate global deployment efforts.
• May manage relationships with key vendors/partners.
• Research systems ideas and draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs. E.g. Architecture of solution: Divide up tasks for various engineering teams to execute taking into consideration requirements engineering, reliability, logistics, coordination of different teams, testing and evaluation, maintainability and many other disciplines necessary for successful system design and field support.
• Test, simulate and measure (including troubleshooting) the performance of systems.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Analyze and interpret data and information.
• Recommend system modifications.
• Create reports and documentation.
• Set yearly plans and goals for the department, give direction on expected performance, provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 11 to 14 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Project Management, Procurement, Negotiation

ประเภทงาน:

งานประจำ

• Manages staff to ensure timely and accurate purchase, movement and control of inventory.
• Maintains responsibility for performance management, development, recognition, coaching and compensation of employees.
• Reassigns personnel as necessary to optimize work.
• Acts as a liaison with customers to ensure forecast commitments are met.
• Maintains continuous material supply, including pricing, on-time delivery, tracking excess and obsolete inventory, maintaining appropriate inventory levels and turns.
• Reviews production schedules and changes to define the material requirements.
• Addresses and resolves possible material shortages.
• Works with other departments to review and dispose of non-conforming materials.
• Acts as a liaison between customer project management and internal departments on the introduction of new product requirements.
• Ensures bill of materials, pricing structure, supplier base, etc., is cost effective.
• Recognizes cost impact of excess and obsolescence and actively seeks return on investment.
• Monitors customer repairs and validates type of warranty and associated costs.
• Works with other departments to meet repair commitments.
• Knowledge/Skills/Competencies.
• Broad knowledge of an electronic manufacturing environment, materials and processes.
• Excellent knowledge of procurement processes, inventory management and supplier management.
• Good understanding of IT concepts and integrated business applications.
• Excellent negotiation and problem resolution skills.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train and motivate a diverse group of employees.
• Typical Experience.
• Requires 5-7 years of relevant experience in procurement, logistics, or supply chain, including supplier and on-time delivery management.
• Must have experience in pricing structure and supplier base management.
• Essential experience includes managing inventory levels, tracking stock, and implementing inventory control procedures.
• Typical Education.
• Bachelor's degree in a related field, or an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

1 ปีขึ้นไป

ทักษะ:

Data Entry, Electronics, English

ประเภทงาน:

งานประจำ

• Under supervision and with assistance develop, qualify, and install test applications into manufacturing operations.
• Optimize the Test process focusing on productivity improvements to cycle time and yield.
• Debug of solutions provided by external vendors or customers based on training supplied.
• Assist with test optimization based on feedback from customers and operations partners based on a solid unstinting of the test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Maintain with minimal supervision, the continuing performance of the Testers and participate in the OEE improvement plans, yield and test time optimization.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• Entry level to 1 year.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

8 ปีขึ้นไป

ประเภทงาน:

งานประจำ

• Receives a daily production schedule from planning; receives material to manufacture modify or repair products from logistics.
• Coordinates these inputs and a variety of resources (e.g., materials, personnel, equipment, etc.) to achieve on-time production of quality products within budget guidelines.
• Identifies and resolves bottlenecks in the production process.
• Identifies limits to production and guides teams to continuously improve processes.
• Knowledge/Skills/Competencies.
• In-depth knowledge of the production process and the tools and equipment used in the process.
• Knowledge of materials and processes.
• In-depth knowledge and understanding of the business unit and how decisions impact customer satisfaction, product quality, on-time delivery and the profitability of the unit.
• Ability to coordinate a wide variety of resources to meet production quality and quantity metrics within a highly dynamic environment.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train and motivate a diverse group of employees to achieve high production levels within tight time deadlines.
• Good understanding of IT concepts and integrated business applications.
• Typical Experience.
• Over 8 years of relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Mechanical Engineering

ประเภทงาน:

งานประจำ

• Responsible for understanding the customer s technical roadmap and identifying and managing all new customer-specific process development projects.
• Manage technical aspects for all new customer-specific process development projects.
• Develop the scope of all technical work, coordinate the team, direct work assignments and assist with problem resolution for the full customer product life cycle support for all manufacturing technical issues related to the customer s product(s) from product conception to product obsolescence.
• Evaluate potential manufacturing impact for each design concept.
• Responsible for the best practice standard development, participate in Industry organizations for developing the standards and provide training and application support globally.
• Set yearly plans and goals for their department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Defines process problems that lead to throughput or quality issues, evaluates cause of problem, implements solutions to stabilize processes, evaluates results.
• Acts as the focal point for all product-related technical issues.
• Interacts with customers to resolve problems and increase the quality and yield of the product and/or the product data release process.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 7-10 years of working experience in new project and engineering management.
• Typical Education.
• Bachelor s Degree in Mechanical Engineering or related fields.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประเภทงาน:

งานประจำ

• Remote Position: No
• Region: Asia
• Country: Thailand
• State/Province: Chonburi
• City: Laem Chabang.
• General Overview.
• Functional Area: Supply Chain Management (SCM)
• Career Stream: Logistic (SCM_LOG)
• Role: Manager 1
• Job Title: Manager, Supply Chain Logistics 1
• Job Code: MG1-SCM-LOG
• Job Level: Level 09
• Direct/Indirect Indicator: Indirect.
• Summary.
• Detailed Description.
• Knowledge/Skills/Competencies.
• Physical Demands.
• Typical Experience.
• Typical Education.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Procurement, Contracts, Business Development

ประเภทงาน:

งานประจำ

• Accountable for global/regional strategic/high-value commodity management: price/value, negotiations, terms.
• Develops/implements procurement strategies (competition, tech, supplier analysis/selection, pricing).
• Primary supplier interface: relationship management, contracts, performance, business development, awards.
• Sources goods/services for supply continuity at lowest cost.
• Leads Commodity Council negotiations and Customer Material Commitment (pricing, BOM analysis).
• Provides site cost analysis reports to senior management.
• Supports team development, recruitment screening, training, mentoring. Leads high-impact commodity negotiations, strategy/planning, supplier communication.
• Manages global negotiation process (forecasting, pricing accuracy).
• Oversees data flow for market pricing, analytical tools, and Commodity Management systems. Conducts strategic analysis (pricing, market, suppliers, customers, contracts).
• May manage critical shortages, site representation, related system changes.
• Drives process improvement, IT tool development, defines/implements business processes.
• Performs complex bid activity.
• Frequent overnight travel may be required.
• Knowledge/Skills/Competencies.
• Extensive knowledge of the marketplace conditions for a broad range of strategic commodities including industry pricing, technology and supply/demand trends.
• Working knowledge of Celestica s global supply chain including strategic policies and objectives.
• Strong knowledge of basic computer applications and the ability to learn and use multiple applications specific to this department including ERP and office systems.
• Strong communication, negotiation and presentation skills.
• Strong knowledge of negotiation practices / methodology for commodities.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Typical Experience.
• 6-8 years of experience in commodity management, procurement, or supply chain management, with increasing responsibility..
• Demonstrated experience in managing strategic and/or high-value commodities..
• Proven track record of developing and implementing procurement strategies, including supplier analysis, development, and selection..
• Significant experience in supplier relationship management, contract negotiation, and performance reviews..
• Experience leading complex negotiations and interacting with senior executives of multi-national companies is highly preferred..
• Experience with cost analysis, performance reporting, and data analysis related to commodity management..
• Typical Education.
• Bachelor s degree in related field, or consideration of an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Accounting, Negotiation, Research

ประเภทงาน:

งานประจำ

• Prepares and interprets monthly and quarterly financial statements for internal and external reporting purposes.
• Prepares financial information with detailed analysis of variances to forecast and plan identifying areas of financial concern requiring action.
• Prepares and analyze key financial and operational metrics.
• Presents and make recommendations to management as a result of analysis.
• Ensures financial controls are in place to properly record transactions in accordance with GAAP.
• Ensures provisions and other accounting processes are in accordance with corporate policies.
• Interface with auditors on area of responsibility.
• Responsible to standardize accounting processes and implement best practices to ensure procedures are as efficient and effective as possible.
• Act as a key advisor to other team members.
• Project leader on cross-functional projects as required.
• Knowledge/Skills/Competencies.
• Basic understanding of internal and external customer needs is required to make effective/informed decisions.
• Strong communication, negotiation and presentation skills.
• Ability to consolidate, manipulate and analyze large quantities of data.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Ability to recommend accounting process changes based on intimate knowledge of accounting processes, policies and procedures.
• Ability to direct others on accounting practices.
• Ability to research accounting rules in both U.S. GAAP and GAAP of relevant country.
• Ability to create a profit center or cost center budget identifying key plan drivers.
• Ability to bridge between actual, plan and forecast, analyzing mix impacts and summarizing in management reports.
• Provide recommendations based on interpretation of results.
• Ability to design/create queries and understands what creates the output.
• Creates basic spreadsheet macros.
• Ability to design custom queries in job-related software.
• Understanding of the relationships between the various tools.
• Understand how to use political structure in the organization and how to get things done using that structure.
• Typical Experience.
• Three to six years of relevant experience.
• Typical Education.
• Bachelor's degree, or consideration of an equivalent combination of education and experience.
• Accounting designation may be required.
• Education experience may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

ทักษะ:

Purchasing, Negotiation

ประเภทงาน:

งานประจำ

• Directs the activities of some or all of the following departments responsible for the manufacture of printed circuit assemblies and related products: purchasing, planning, order fulfillment, production, distribution, facilities management, and asset management..
• Selects employees, assigns objectives, reviews performance and approves employee compensation..
• Coaches for improved performance, approves disciplinary actions and reassigns person ...
• Establishes, implements and monitors strategic processes to maintain and improve production and production support..
• Plans, manages and controls performance by establishing overall direction and priorities..
• Develops and reviews departmental performance metrics..
• Drives continuous improvements in processes..
• Establishes and manages the departmental budgets..
• Develops strategic planning objectives and communicates those objectives to subordinates..
• Allocates resources and monitors costs, operational expenses and personnel to achieve the goals of the departments..
• Maintains profit and loss accountability..
• Participates on the site management team to help plan and set strategic direction..
• Interfaces with other departments to assess and improve existing processes..
• Supplies information for customer quotes..
• Develops customer specific processes and procedures as required to support the business..
• Coordinates the introduction of new product lines..
• Interfaces with internal and customer design teams on yields, supplier issues, design improvements, testing issues, etc..
• Participates on company world-wide teams to share information, help implement global initiatives, and continuously improve performance in manufacturing areas..
• Knowledge/Skills/Competencies.
• In-depth knowledge and understanding of manufacturing departments and how decisions impact customer satisfaction, product quality, on-time delivery and the profitability of the unit..
• In-depth knowledge of manufacturing, the production process and the tools and equipment used in the process..
• Excellent analytical, negotiation and problem resolution skills..
• Ability to establish manufacturing goals and coordinate a wide variety of resources to meet quality and quantity metrics..
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion..
• Ability to effectively communicate with a wide variety of internal and external customers..
• Ability to effectively lead, manage, train and motivate a diverse group of employees to achieve high performance levels within tight time deadlines in a highly dynamic manufacturing environment..
• Extensive experience in World Class Manufacturing/Lean implementation..
• Strong communication and presentation skills.
• Ability to work effectively cross functionally and with other sites to achieve objectives.
• Physical Demands.
• Duties of this position are performed in a manufacturing environment with occasional exposure to elements such as noise, dust, chemicals, operating machinery, temperature extremes, etc..
• Duties may require periodic sustained visual concentration on a computer monitor or on numbers and other detailed data..
• Occasional overnight travel is required..
• Above demands are carried out within the local existing Health and Safety guidelines.
• Typical Experience.
• Eleven to fourteen years relevant experience.
• Typical Education.
• Bachelor s degree in related field, or consideration of an equivalent combination of education and experience..
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Electronics, Excel, Data Entry

ประเภทงาน:

งานประจำ

• Basic knowledge of an electronic manufacturing environment, materials and processes.
• Basic knowledge of production planning fundamentals, scheduling, materials requirements planning techniques and manufacturing control systems.
• Basic knowledge of purchasing principles, techniques and philosophies.
• Knowledge of basic computer applications such as WORD, Excel, PowerPoint and multiple business applications.
• Basic understanding of customer needs.
• Good analytical and statistical skills.
• Ability to plan strategically for the coordinated build and delivery of one or several products.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prior Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.
• Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services..

ทักษะ:

Research, Product Design, English

ประเภทงาน:

งานประจำ

• Develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate other engineers including reviews of their work.
• Reviews and interprets customer documentation, conducts appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Provide high level test hardware and software solution architecture.
• Create structural or functional test strategy and test plan to meet project goals and requirements.
• Create technical proposals with costed BOM and hours estimates.
• Create product test requirements with guidance from senior staff and collaboration with customer designers.
• Provides Technical program management for small projects.
• Develop production test strategies based on product design specification.
• Design and develop test solutions including hardware & software elements and then system integration, qualification, and installation to meet product, quality and test requirements outlined in the test plan.
• Debug of tester issues using design of experiments, tools, and failure analysis methodologies.
• Execute all validation/qualification requirements by applying statistical and common industry methods.
• Stabilization of Test Solutions for manufacturing working to optimize with process teams focusing on cycle time and yield.
• Test developers may also work with product design teams with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keeping up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• DIGITAL/LOGIC: Familiarity of EE-Embedded such as FPGA, DSP and Microcontroller 8-bit, 32-bit ARM Cortex, Familiarity of communications protocols such as RS-232, UART, SPI, I2C, USB and PCIE Gen 3 and higher,.
• Knowledge of Timming diagram of Digital signal analysis.
• POWER: EE-POWER Switching power supplies, Familiarity of Power efficiency in AC-DC converter, EE-POINT of Load Supplies, Power Integrity-CoreSim.
• PCB/LAYOUT: Signal Integrity, Power Integrity, Tolerance Analysis, Cadence, Mentor Xpedition, Mentor PADS, Altium Designer, Other Layout tools (Preferably Altium Designer), Print Circuit Board Fabrication.
• SCHEMATIC DESIGN/SIGNAL INTEGRITY: EE-Digital, EE-Analog, Tolerance Analysis, Static Timing, Schematic Modeling.
• ANALOG: EE-Analog, Tolerance Analysis, Mixed signals of digital and Analog, Grounding balance of multiple systems.
• RF: RF Design(20Ghz).
• Typical Experience.
• Minimum of 5+ yrs of experience Structural and Functional Test development / support for electronic / automotive industry.
• Strong knowledge on test development (SW and Test fixtures).
• Proven strong knowledge on test programming development.
• Familiarity with Altium Designer and PCB fabrication.
• Knowledge on fixtures design, setup/integration.
• Good verbal, and written communication skills in English.
• Must have experience with disciplined operations.
• Must have experience working with and coordinating well with multiple intercompany organizations.
• Typical Education.
• Degree or higher in Electronics Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Product Design, Procurement

ประเภทงาน:

งานประจำ

• Lead development of production test strategies based on product design specification.
• Lead the development of test plans and requirements for customer products including both hardware and software elements.
• Lead the procurement, qualification, and installation support for manufacturing across the factory.
• Be accountable for the test process optimization with a focus on productivity improvements to cycle time and yield across a factory serving multiple customers.
• Provide project leadership, including management of (and communication with) team members, suppliers for comprehensive test deployments including structural, functional, system, stress and final test applications at the factory level.
• Support sales process by providing support to the quoting process.
• Work with design to enhance solution with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keep up to date with relevant industry knowledge and regulations.
• Lead and drive complex problems related to product yield or test performance.
• Industry recognized expert in a specific test domain.
• Provide company-wide test strategy support including training, capital investment, aged equipment rotation, supplier relationship management and industry equipment evaluation for the purpose of capital planning.
• Set yearly plans and goals for his department, give direction on expected performance, provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 7 to 10 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Finance, Contracts, Negotiation

ประเภทงาน:

งานประจำ

• Works as a member of a team responsible for the day-to-day activities of customer accounts, ensuring timely product deliveries and on-schedule project/program completion.
• Develops action plans to address deviations from planned conditions.
• With guidance from more experienced team members, manages customer account profitability, including forecasting, planning, and monitoring the efficiency and execution of strategies.
• Actively participates in pricing/bid preparation and the development and management of contract terms.
• Manages and monitors customer satisfaction on a daily basis and through formal channels (customer surveys, self-assessments, complaint management, problem resolution, and satisfaction management).
• Communicates frequently with customers to ensure their satisfaction with the company and its products.
• Coordinates and hosts regular or as-needed program tracking meetings with customers and internal account team members to ensure ongoing communication and up-to-date progress/status reporting.
• Receives and resolves customer issues and complaints. Monitors the impact of order changes on inventory.
• Provides performance reporting and analysis for monthly Operations Reviews and quarterly Customer Performance Reviews.
• Collaborates with cost engineering, finance, and Supply Chain Management (SCM) staff to coordinate efforts in analyzing costs and price variances.
• Knowledge/Skills/Competencies.
• In-depth knowledge of the manufacturing process, schedules, scheduling requirements, and Supply Chain Management (SCM).
• In-depth knowledge of the business issues associated with manufacturing Printed Circuit Boards (PCBs).
• In-depth knowledge of product pricing, contracts, and contract negotiations.
• Thorough understanding of business risks and price composition (value-add and materials).
• Excellent customer contact, negotiation, and problem-resolution skills.
• Strong presentation, database management, and computer skills.
• Ability to manage multiple, detailed projects to successful completion under tight deadlines.
• Strong interpersonal skills and the ability to effectively communicate with a wide range of internal and external customers.
• Ability to effectively lead and motivate a diverse group of employees to achieve high production within tight deadlines.
• Typical Experience.
• At least 6 years of experience in manufacturing and supply chain management, with a strong focus on PCB manufacturing business practices, including pricing, contracts, and risk assessment.
• Proven expertise in customer relationship management, negotiation, and problem resolution, coupled with advanced presentation, database management, and computer skills.
• Demonstrated ability to manage complex projects under tight deadlines and lead diverse teams to achieve high production goals.
• Typical Education.
• Bachelor's degree in Engineering, Business Administration, Supply Chain Management, or a related field.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Research, Data Entry

ประเภทงาน:

งานประจำ

• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Recommend system modifications.
• Creation of an Electronic component library for simulation.
• Analysing and interpreting data and information.
• Creating Schematic simulation reports and documentation.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Knowledge in Analog circuit design and Digital circuit design.
• Knowledge in Electronic component.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 0-3 years of experience with hardware Design.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Financial Reporting, Finance, ERP

ประเภทงาน:

งานประจำ

• Acts as project leader for the development of financial plans for a business group or customer account.
• Develops timelines, plan guidance and plan assumptions.
• Gathers and analyzes information on which to base plan assumptions.
• Oversees the development and preparation of alternative plan models.
• Prepares and presents summaries to management.
• Prepares monthly financial reporting packages including forecasts, results and financial and operational metrics.
• Completes special projects involving the analysis of financial information related to inventory, costs, headcount, profit maximization, expense targets both within finance or as member of a cross functional or customer team.
• As required, plays a leadership role with junior members of the decision support team, coordinating and guiding activities, providing direction or leading group projects.
• Knowledge/Skills/Competencies.
• Working knowledge of Celestica s finance organization including strategic policies and objectives.
• Strong knowledge of basic computer applications and the ability to learn and use multiple applications specific to this department including ERP and office systems.
• Strong communication, negotiation and presentation skills.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to recommend accounting process changes based on intimate knowledge of accounting processes, policies and procedures.
• Ability to direct others on accounting practices.
• Ability to recommend creative accounting solutions that is in accordance with U.S. GAAP or GAAP of the relevant country.
• Ability to manage large-scale budgeting/forecasting process.
• Ability to analyze and summarize key highlights and makes recommendations to management for plan/forecast savings.
• Perform financial sensitivity analysis against all key factors (pricing, operating and costing) and provide management with recommendations/solutions.
• Makes recommendations based on interpretation of results.
• Understands MRP configurations/processes.
• Creates basic spreadsheet macros.
• Ability to design custom queries in job-related software.
• Understanding of the relationships between the various tools.
• Understands how to use the political structure in the organization and how to get things done using that structure.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements are frequently required (e.g. data entry, using a computer mouse, using a calculator, etc).
• Occasional overnight travel may be required.
• Typical Experience.
• Six to eight years of relevant experience.
• Typical Education.
• Bachelor's degree, or consideration of an equivalent combination of education and experience.
• Education experience may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

15 ปีขึ้นไป

ทักษะ:

Research, Electronics, Data Entry

ประเภทงาน:

งานประจำ

• Design, develop and implement technical solutions in two or more technical areas. Lead smaller projects and may coordinate with other engineers including reviews of their work.
• Review and interpret customer documentation, conduct appropriate research, analysis and experiments with minimal direction from senior staff.
• Creates technical proposals (solution and timelines) based on requirements.
• Research systems ideas and will draw up plans for these systems.
• Design, modify and implement systems that meet customer and Celestica needs.
• Create designs in line with Celesticas procedures, regulations and customer standards.
• Keep up to date with relevant industry knowledge and regulations.
• Solve complex problems.
• Liaison with suppliers, customers, contractors, and other internal teams.
• Recommend system modifications.
• PCB layout Design, Schematic by using Allegro Candence Software.
• Participate in HW/Layout review.
• PCB stack up review.
• Work with the Electrical and Mechanical Engineers to ensure the design meets all requirements from an electrical performance and mechanical enclosure perspective.
• Create and export manufacturing files ( drawing, gerber ) and review DFM/DFT with Manufacturing team.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Bachelor s degree in Electronics Engineering, or equivalent experience.
• 10+ years experience of PCB high speed layout design using industry standard PCB design.
• Experience with using Allegro Cadence software.
• Experience with high current density designs.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 10 to 15 years of related experienc;Experience in similar job roles.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Data Entry

ประเภทงาน:

งานประจำ

• Provides entry-level professional support in the procurement of lower dollar manufacturing materials and services.
• Reviews demand requirements for lower dollar, lower cost manufacturing parts and supplies.
• Checks requisitions for completeness and accuracy.
• Obtains quotes, examines bids and recommends awards.
• Suggests, prepares and administers purchase orders to achieve material quality, cost and delivery requirements.
• Analyzes material availability to manage inventory investment. Maintains responsibility for data integrity in Item Master file.
• Maintains ongoing communication with suppliers to gather information on materials availability, cost, shipping and delivery methods and timing, problem resolution, etc.
• Expedites or follows up on deliveries as appropriate to meet delivery requirements.
• Assists in surveys, site audits and analysis leading to supplier sourcing.
• Assists Buyer or Team Leader in reviewing supplier performance and makes recommendations on changes or disqualifications.
• Provides resolution of receipt and supplier invoice discrepancies.
• Knowledge/Skills/Competencies.
• Basic understanding of manufacturing processes and procedures.
• Basic understanding of materials being purchased by the department.
• Knowledge of basic computer applications and the ability to learn and use multiple applications specific to this department.
• Knowledge of purchasing practices and procedures.
• Basic math, data entry and 10-key skills.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Ability to efficiently organize, file and retrieve hard copy and electronic information relating to the business of the work unit.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Typical Experience.
• Zero to two years of relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

2 ปีขึ้นไป

ทักษะ:

Compliance, Data Entry

ประเภทงาน:

งานประจำ

• Works in support of logistics processes such as materials replenishment/ kitting, warehouse shipping/receiving and/or distribution.
• Provides analytical and administrative support to logistics department.
• Prepares and analyzes department performance measurements.
• Creates department reports and communicates to other departments/ functions.
• Develops and assists in implementing corrective action plans.
• Develops training systems and documentation for new employees.
• Performs administrative tasks in support of department activities.
• Recommends process improvements, assists with implementation, documentation and communicates to other function areas.
• Gets involved in resolving parts and process issues.
• Works on special projects as assigned.
• Conducts order book management including new order analysis and entry, open orders, and behind schedule order process.
• Oversees return materials management to ensure fast turnaround, customer satisfaction, and minimal financial impact.
• Ensures products shipped are timely and match customer order.
• Conducts analysis of best practices and shares among business units and customers.
• Knowledge/Skills/Competencies.
• Good understanding of manufacturing, warehouse and distribution processes.
• Knowledge of personal computers and ability to learn and use applications specific to this area.
• Basic understanding of internal and external customer requirements.
• Ability to identify and resolve complex process/system problems using financial, analytical and statistical models.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prioritize, and problem solve tasks which are limited in complexity to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Typical Experience.
• Zero to two years of relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประเภทงาน:

งานประจำ

• Manage programs (multiple projects per program) of medium complexity (technology, organizationally). Lead cross-functional, global core team(s), kick off programs, establish schedules and drive meetings.
• Present and communicate status to the business leaders and customers. Review and interpret customer specifications and provide customer feedback.
• Coordinate site-wide deployment efforts.
• Implement change as directed in the product lifecycle process and recommend process improvements.
• Plan the overall program and monitor the progress. Drive the creation, review, approval and update of the Program Plan/WBS including resources.
• Daily program management throughout the program life.
• Drive the program core team to meet or exceed program objectives (Cost, Quality, Schedule, Features, Fulfillment/Continuity of Supply, Solution delivery across products & service offerings, Customer Specific Needs).
• Define the program governance (controls).
• Manage the program s budget. Forecast actuals against plan/quote for income/revenue, cost/labour & expense.
• Manage risks and issues and taking corrective measurements.
• Coordinate the projects and their interdependencies. Manage and utilize resources across projects.
• Align the deliverables (outputs) to the program s outcome with the aid of the business change manager.
• Manage the main program documentation, such as the Program Initiation document.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 4 to 6 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

8 ปีขึ้นไป

ทักษะ:

Statistical Analysis

ประเภทงาน:

งานประจำ

• Under supervision and with minimal assistance define, specify, qualify, install, support and optimize test process and test equipment solutions for manufacturing.
• Lead test process optimization, with a focus on productivity improvements to cycle time and yield for a specific set of equipment within an Operations value stream.
• Debug of test process and equipment solutions using design of experiments, tools, and failure analysis methodologies.
• Collaborate with Quality, Process and Equipment engineers to detect and solve product and test yield and performance issues.
• Develop improvement roadmaps for test coverage, diagnosability, reparability, test time reductions and OEE.
• Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of yield loss.
• Provide solution support to process engineers to improve detection of known defect types as part of a Process Control plan.
• Support development of test equipment integration into Manufacturing Execution Systems including yield, tester log and product parametric information.
• Knowledge/Skills/Competencies.
• Strong analytical and problem-solving skills with the ability to troubleshoot complex technical issues.
• Proficiency in statistical analysis and data interpretation.
• Solid understanding of test methodologies and equipment used in manufacturing (e.g., functional testing, in-circuit testing, parametric testing).
• Familiarity with Design of Experiments (DOE) principles and their application in process optimization and problem-solving.
• Knowledge of failure analysis techniques and methodologies.
• Understanding of quality management principles and their application in a manufacturing setting.
• Excellent communication and collaboration skills to effectively work with cross-functional teams.
• Ability to develop and present technical documentation and reports.
• Basic understanding of Manufacturing Execution Systems (MES) and data integration concepts (desirable).
• Familiarity with process control plans and their relationship to test processes.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Occasional travel may be required.
• Typical Experience.
• 1 to 3 years of experience in manufacturing test engineering role, preferably within a high-volume production environment.
• Demonstrated experience in defining, specifying, qualifying, installing, and supporting test processes and equipment.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Compliance, Project Management, Excel

ประเภทงาน:

งานประจำ

• Supports generation of performance metrics for products and processes of relatively low complexity, and drives the team to achieve Quality Goals set by management (i.e.: DPQL, Total Quality at Celestica (TQ@C)), following industry standards such as ISO, IPC, AS, TL.
• Leads Quality Improvement Programs (QIP) in support of customer requirements and expectations that are considered small in scale and low in complexity.
• Mentors and trains personnel in the practices of Quality management and Quality impr ...
• Resolves customer issues of low difficulty using quality tools: Root Cause Analysis and Corrective Actions that are effective and timely.
• Provides leadership and support in a variety of areas such as, analysis of nonconforming materials and customer return material authorizations.(RMA's), coordinating ESD compliance, supporting customer and 3rd party audits, and the administration of Quality management (Documentation, Change Control, Corrective & Preventive Actions and Calibration).
• Supports new customer qualification and New product introduction with supplier assessments, First Article Inspections and oversee generation of product documentation for products / programs that are relatively low risk.
• Knowledge/Skills/Competencies.
• In-depth knowledge of quality metrics, ISO standards and processes.
• Knowledge of Lean and Six Sigma Manufacturing processes and controls including: Statistical Process Control (SPC), 5S and Value Stream Mapping (VSM).
• Good knowledge of Quality Management tools including: Failure Mode and Effect Analysis (FMEA) and development of Quality Control Plans.
• Strong Project Management Skills.
• Ability to coordinate a wide variety of resources to meet production quality and quantity metrics.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train and motivate a diverse group of employees to achieve high production levels within tight time deadlines and in a ~highly dynamic manufacturing environment.
• Ability to use some or all of the following PC applications: Google Applications, Word, Excel, and PowerPoint.
• Strong knowledge of the manufacturing processes.
• Physical Demands.
• Sustained visual concentration on small areas, such as monitors, screens.
• Sustained visual concentration on numbers, legal documents.
• The job works in generally good conditions with occasional exposure (10% - 33%) to noise, odours, dust, drafts, chemicals, operating machinery, temperature extremes, hazardous substances, etc.
• Occasional overnight travel is required.
• Typical Experience.
• 4 to 6 years ( 6 to 8 years).
• Typical Education.
• Bachelor's Degree.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Project Management, Financial Reporting, Accounting

ประเภทงาน:

งานประจำ

• Responsible for understanding and implementing the customers technical roadmap and related process development projects.
• Lead and implement the development and release of the full manufacturing process for new customer products.
• Understand and provide feedback on customers technical requirements to team members and management.
• Responsible for developing and implementing costed and optimized feedback using Design for manufacturability (DFX) tools and processes, with the goal of reducing manufacturing cost and improving quality and reliability of product.
• Develop, plan and lead the assessment of the capability of process applications using Design of Experiments.
• Devise process controls and data collection strategies and evaluate complex data to assist with reporting yield, reliability and diagnoses to root causes failures impacting product quality.
• Ensure accurate and timely communication to management on critical technical and business issues.
• Set yearly plans and goals for the department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage/lead complex, multiple line engineering projects that may also involve other functions. Demonstrate solid understanding of the technical, financial and people aspects of the project. Able to create a project/change management plan and ensure that the project is delivered within the assigned time and budget. Ability to recognize project barriers and develop mitigation plans.
• Leadership - Demonstrate "People & Team Leadership Behaviors" as per Celestica Leadership Imperatives.
• Financial Acumen / Business Planning - Ability to create financial plans for your projects, align them internally with your line of management and other functions and externally if needed. Create project plans, profitability calculations, risk and sensitivity analysis, able to recognize barriers and mitigate profitability risks. Fully knowledgeable about internal and external financial reporting, accounting and tax requirements relevant to your area of expertise.
• The following competencies may also be required: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE).
• Typical Experience.
• 10+ years of work experience in PCB assembly manufacturing field.
• Typical Education.
• Degree or higher in Mechanical/Chemical/Electrical Engineering or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Compliance, Legal, Excel

ประเภทงาน:

งานประจำ

• Acts as the first point of contact for business partners, managers, and employees seeking advise and counsel on all workforce matters.
• In unionized sites provides administration of the bargained agreement between the Company and Union including grievances.
• Administers processes, policies, and programs related to compensation (i.e., merit increases, PDP ratings), training & development, staffing and employee relations.
• Communicates program changes to management team and to employees.
• Oversees the corrective action process for site.
• Assists with internal investigations regarding possible violations of codes of conduct.
• May represent the site in charges of violating regulation or law.
• Works with management team to ensure effective performance management and culture building practices are in place.
• Partners with site leadership to effect change and effectively serve as a change agent by managing the development, implementation and continuous improvement of programs to enhance employee satisfaction, improve morale, positively impact retention and assure alignment with corporate values and policies.
• Ensures compliance to corporate policies, governmental regulations and laws.
• Keeps abreast of legislative decisions, changes in federal, state and local employment laws and regulations to limit legal exposure and liability.
• Knowledge/Skills/Competencies.
• Significant knowledge of government legislation impacting the practice of human resources management.
• Significant knowledge of company HR policies and practices, labour movement, arbitration proceedings.
• Knowledge of HRIS and report writing (Reportsmith).
• Good public presentation skills.
• Ability to conduct a thorough, timely and unbiased internal investigation and provide practical recommendations.
• Ability to effectively communicate with a wide variety of internal customers.
• Ability to evaluate multiple highly detailed tasks, determine priorities and organize work in a manner that allows for timely completion of projects.
• Ability to manage sensitive employee information in a confidential manner.
• Knowledge of computer applications and the ability to accurately perform tasks in some or all of the following applications: Access, Excel, Word and PowerPoint.
• Physical Demands.
• Duties of this position are generally performed in good working conditions.
• Occasional exposure to elements such as noise, dust, chemicals, operating machinery, temperature extremes, etc.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Typical Experience.
• Two to Four years relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Assembly, Contracts, Negotiation

ประเภทงาน:

งานประจำ

• Provides technical expertise on assigned materials for production or customer-identified material problems.
• Performs assessments/risk analysis and quality audits on potential suppliers.
• Generates product specifications and provides to supplier.
• Performs material qualification on prototype / sample material.
• Serves as the program/project interface to coordinate new product launches / introductions.
• Translates customer requirements into factory activities, provides factory activity time estimates for pricing model, documents associated factory support activities, and develops preliminary program timeline for customer quote.
• Defines process problems that lead to throughput or quality issues, evaluates cause of problem, implements solutions to stabilize processes, evaluates results.
• Participates in the selection of new manufacturing equipment.
• Evaluates software and hardware upgrades and new equipment.
• Sets equipment specifications and develops and runs qualification tests.
• Gathers, understands and converts customer data into usable manufacturing information.
• Verifies that specifications conform to customer, industry and company standards.
• Gathers, analyzes, sorts and distributes data to understand and solve quality issues.
• Creates and evaluates metrics to drive the quality improvement process.
• Develops test processes, test fixtures and specialized tools to automate test development.
• Develops assembly/test processes, associated fixtures, and specialized tools.
• Automates where ever possible.
• Develops and implements assembly/test strategy for new products including DFx analysis and feedback.
• Knowledge/Skills/Competencies.
• Engineering Foundation Competencies.
• In-depth knowledge and understanding of the design process for systems and printed circuit boards, subassemblies, or other related company products.
• In-depth knowledge of manufacturing processes and equipment used for systems and printed circuit boards and subassemblies.
• In-depth knowledge of industry and quality standards and SPC methodologies.
• In-depth knowledge of materials and components used in the construction of systems and printed circuit boards and subassemblies.
• In-depth knowledge of material science, robotics, machine programming.
• In-depth knowledge of product pricing, contracts and contract negotiations.
• Excellent customer contact, negotiation and problem resolution skills.
• Good presentation, database management and computer skills.
• Strong knowledge of statistical process control methods and techniques.
• Knowledge and understanding of the design process for systems and printed circuit boards.
• Ability to design tests, evaluate results and recommend solutions to improve the processes associated with SMT and optical manufacturing.
• Ability to evaluate, diagnose and troubleshoot problems.
• Strong knowledge of IT platforms, database design and programming languages.
• Strong knowledge of some or all of the following: UNIX, NT, database management system.
• Ability to evaluate materials, gather and analyze data and determine root cause of problems.
• Ability to manage several projects simultaneously and coordinate multiple, changing deadlines.
• Ability to effectively communicate with a variety of internal and external customers.
• Physical Demands.
• Duties of the position are performed in a manufacturing environment with frequent exposure to noise, dust, chemicals, operating machinery, temperature extremes, hazardous substances, etc.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required.
• Typical Experience.
• Three to six years of relevant experience.
• Typical Education.
• Bachelor's degree in a related field, or an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Data Entry

ประเภทงาน:

ฝึกงาน

• Fulfills requirements of University or College Internship program in a Support function whereby the duties are categorized as "Indirect" labour.
• Duties fulfill the requirements of the specific internship program.
• Knowledge/Skills/Competencies.
• Enrolled in a formal University or college Internship program.
• Physical Demands.
• Duties of this position are performed in a normal office with exposure to manufacturing environments.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements are frequently required (e.g. data entry, using a computer mouse, using a calculator, etc).
• Basic manufacturing system knowledge.
• Typical Experience.
• No formal experience is required.
• Typical Education.
• University or College program in progress.
• Education experience may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Accounting, Compliance, Finance, English

ประเภทงาน:

งานประจำ

• Manages financial and accounting staff within the department.
• Staffs the department, assigns work, reviews performance and addresses performance issues.
• Provides leadership, coaching, and development.
• Promotes and maintains a productive work environment.
• Develops policies, procedures and business controls to provide work direction.
• Ensure coherence within the organization as far as compensation policies are concerned.
• Manages the audit, compliance and external reporting processes.
• Acts as a liaison to federal, state, insurance, banking and other external auditors.
• Develops and implements business controls and procedures to minimize or comply with audit recommendations, and is responsible for finance the results.
• Provides information to consultants responsible for external financial reporting.
• Provides guidance to management on accounting policies and procedures.
• Ensures compliance with corporate policies and objectives.
• Ensures that non finance functions are behaving within mentioned policies.
• Drives the escalation path cross Functions and Sites.
• Manages special projects, with special regards to cross functional and sites.
• Knowledge/Skills/Competencies.
• In-depth knowledge and understanding of financial management.
• Strong knowledge of global business environment and customers' business.
• Good understanding of integrated business applications.
• Good negotiation and problem resolution skills.
• Good communication and presentation skills.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train and motivate a diverse group of employees.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• In-depth knowledge of generally accepted accounting and financial principals and procedures.
• Ability to apply mathematical, statistical and financial operations to complete tasks and solve complex problems.
• Ability to communicate effectively with a wide variety of internal and external customers and other functions.
• Ability to prioritize tasks and complete duties while working with a large volume of detailed information under tight time deadlines, and present to management in term of comprehensive summary.
• For non English mother language: Ability to attend and run discussions in English.
• Ability to manage basic project management techniques.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Overnight travel may be required.
• Typical Experience.
• Seven to 10 years of relevant experience.
• Typical Education.
• Bachelor's degree, or consideration of an equivalent combination of education and experience.
• Education experience may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Budgeting, Finance, Compliance

ประเภทงาน:

งานประจำ

• Owns the whole management reporting, which includes planning, budgeting, forecasting, and variance analysis processes with focus to develop efficiency in the process including the non-finance stakeholders (Operation, SCM, CFT, HR&hellip.) including:IFRS 15 reporting.
• US GAAP compliance.
• CF review & hedging.
• CPR reporting (productivity & continues improvement financial measurement).
• Flawless Lunch (project phase gate financial review).
• New quotations and rates.
• Management Dashboards and GM partnering.
• Lead complex cross-functional projects in area FP&A and tax as Finance department representative.
• Act as a project manager for finance-related projects, including tax compliance initiatives or tax model implementation (TP area).
• Assist in scenario analysis, assessing the financial impact of various business initiatives.
• Internal Controls & SOX.
• Manage and improve the company s forecasting tools and processes to ensure accurate and timely information.
• Simplify and automate FP&A processes to improve efficiency and accuracy to reduce manual efforts and increase process reliability.
• Document FP&A processes and document desktop procedures for knowledge sharing and clear guidelines available for all team members are in place. Further develop and optimize this documentation, assuring the application of best practices in compliance with company s internal control framework.
• Mapping of team competencies and update the RR matrix.
• Mentor and develop junior team FP&A team members.
• Bachelor s degree in Finance, Accounting, Economics, or a related field.
• 5+ years of experience in FP&A, Finance, Accounting or related financial roles.
• Strong analytical skills with a demonstrated ability to interpret data and provide actionable insights.
• Expertise in financial modeling, budgeting, forecasting, and variance analysis.
• Advanced proficiency in Excel and experience with financial software (Oracle Hyperion Financial Management, Long View ).
• Excellent communication and presentation skills, with the ability to interact effectively with senior leadership.
• Experience in process improvement and automation within finance functions, leveraging technology such as RPA (Robotic Process Automation) or financial software.
• Familiarity with tax-related finance projects such as transfer pricing, indirect taxes, or compliance.
• Project management skills and ability to work in a cross-functional team environment and manage multiple stakeholders.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Automation, Software Development, Project Management

ประเภทงาน:

งานประจำ

• Work as a team member who understands/interprets technical problems and provides technical support.
• Solve assigned problems under guidance of more senior engineers.
• Analyze, design and develop tests and test-automation suites.
• Design and develop a processing platform using various configuration management technologies.
• Test software development methodology (may be done in agile environment).
• Provide ongoing maintenance, support and enhancements in existing systems and platforms.
• Collaborate cross-functionally with customers, users, project managers and other engineers including Peer-Reviews to achieve elegant solutions.
• Provide recommendations for continuous improvement.
• Work alongside other engineers on the team to elevate technology and consistently apply best practices.
• Keep up to date with relevant industry knowledge and regulations.
• Knowledge/Skills/Competencies.
• Project Management - Ability to manage a single line engineering project with a limited number of participants. Create a project/change management plan, establish and distribute project roles, and communicate what is needed from the project participants in order to make the project successful..
• Leadership - Demonstrate "Individual Leadership Behaviors" as per Celestica Leadership Imperatives..
• Financial Acumen / Business Planning -Solid understanding of Celestica s budgeting and accounting system and the cost accounting practices relevant to engineering work. Always act with the awareness of your work's impact on financial results. Communicate clearly and timely all aspects of your work that may have an influence on the profitability of the project and/or what is necessary for proper accounting and controlling..
• The following competencies may also be required and performed with help or under supervision: Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE)..
• Typical Experience.
• Over 8 years.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Financial Reporting, Finance, Negotiation

ประเภทงาน:

งานประจำ

• Acts as project leader for the development of financial plans for a business group or customer account.
• Develops timelines, plan guidance and plan assumptions.
• Gathers and analyzes information on which to base plan assumptions.
• Oversees the development and preparation of alternative plan models.
• Prepares and presents summaries to management.
• Prepares monthly financial reporting packages including forecasts, results and financial and operational metrics.
• Completes special projects involving the analysis of financial information related to inventory, costs, headcount, profit maximization, expense targets both within finance or as member of a cross functional or customer team.
• As required, plays a leadership role with junior members of the decision support team, coordinating and guiding activities, providing direction or leading group projects.
• Knowledge/Skills/Competencies.
• Basic understanding of internal and external customer needs is required to make effective/informed decisions.
• Strong communication, negotiation and presentation skills.
• Ability to consolidate, manipulate and analyze large quantities of data.
• Ability to handle multiple tasks while maintaining attention to detail and accuracy and working under tight time deadlines.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to evaluate, prioritize and problem solve a variety of tasks to ensure their timely and accurate completion.
• Ability to communicate effectively, both verbally and in writing, with a wide variety of internal and external customers.
• Ability to recommend accounting process changes based on intimate knowledge of accounting processes, policies and procedures.
• Ability to direct others on accounting practices.
• Ability research accounting rules in both U.S. GAAP and GAAP of relevant country.
• Ability to create a profit center or cost center budget identifying key plan drivers.
• Ability to bridge between actual, plan and forecast, analyzing mix impacts and summarizing in management reports.
• Provide recommendations based on interpretation of results.
• Ability to design/create queries and understands what creates the output.
• Creates basic spreadsheet macros.
• Ability to design custom queries in job-related software.
• Understanding of the relationships between the various tools.
• Understand how to use political structure in the organization and how to get things done using that structure.
• Physical Demands.
• Duties of this position are performed in a normal office environment.
• Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data.
• Repetitive manual movements are frequently required (e.g. data entry, using a computer mouse, using a calculator, etc).
• Occasional overnight travel may be required.
• Typical Experience.
• Three to six years of relevant experience.
• Typical Education.
• Bachelor's degree, or consideration of an equivalent combination of education and experience.
• Education experience may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Product Design, Procurement, Negotiation

ประเภทงาน:

งานประจำ

• Support development of production test strategies based on product design specification.
• Develop test plans and requirements for customer products including both hardware and software elements.
• Lead the procurement, qualification, and installation support for manufacturing for a large customer.
• Be accountable for the test process optimization with a focus on productivity improvements to cycle time and yield within a CFT or across a large equipment set serving multiple customers.
• Provide project leadership, including management of (and communication with) team members, suppliers for comprehensive test deployments including structural, functional, system, stress and final test applications for a large customer.
• Support sales process by providing support to the quoting process.
• Work with Design to enhance solutions with feedback from product testability, test coverage, diagnosability, reparability, firmware/diagnostics and user experience.
• Keep up to date with relevant industry knowledge and regulations.
• Lead and drive complex problems related to product yield or test performance.
• Support sales process by providing support to the quoting process.
• Set yearly plans and goals for the department, give direction on expected performance, provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Skills in Coaching/Mentoring, Communication/Negotiation/Presentation.
• Creative Problem Solving, Working Effectively with Other.
• Customer Interaction/Stakeholder Management.
• Quality & Lean, D/PFMEA, 8D/Corrective Action.
• Equipment Safety, Design of Experiments (DOE).
• Demonstrate "People & Team Leadership Behaviors".
• Ability to manage/lead complex, multiple line engineer project.
• Typical Experience.
• Experience in large-scale In-circuit MFG test support.
• Experience in ESD Controls, Component Module Programming, ICT Equipment Maintenance, ICT Engineering Technical Support, 3070 and Teradyne ICT Test Development Applications.
• Typical Education.
• Degree or higher in Electronics or equivalent.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electronics, Assembly, Data Analysis

ประเภทงาน:

งานประจำ

• Failure Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of failure and yield loss.
• Debug and troubleshoot product failure using data analytic, DOE (design of experiments), TDR, Six Sigma tools, and failure analysis methodologies.
• Collaborate with Customer, Design, Quality, Process, Supplier Engineer into problem solving and test yield and performance issues.
• Drive failures troubleshooting and develop debug methodology since NPI.
• Set up continuous yield improvement and bone pile drive with customer and design team.
• Introduce proper debug tools and capacity per projected failure rate.
• Analyze failure opportunity and develop and implement test, debug, component failure procedures for efficient and effective detection of defects.
• Analyze test results and provide feedback to design and component engineers for product performance improvement.
• Evaluate and integrate new test/debug technology to enhance capabilities and address evolving product requirements.
• Collaborate with the team on bone pile, scrap and NDF reduction, productivity improvements to cycle time.
• Provide solution support to test engineers to improve detection, increase test coverage, and improve product performance.
• Knowledge/Skills/Competencies.
• Deep understanding of automatic test equipment (ATE) used in electronics industry, such as flying probe testers, in-circuit testers (ICT), and functional testers.
• Expertise in defining, specifying, qualifying, installing, supporting, and optimizing test processes and equipment for PCB assembly (PCBA).
• Proven ability to lead and drive test process optimization initiatives for PCBAs, focusing on reducing test cycle time and improving first-pass yield.
• Advanced proficiency in debugging test programs and fixtures for PCBAs using techniques like boundary scan, fault dictionary analysis, and circuit schematic interpretation.
• Thorough knowledge of PCB manufacturing processes and common defects (e.g., solder joint issues, component placement errors, shorts, opens).
• Strong understanding of electrical testing principles and methodologies relevant to PCBAs.
• Familiarity with IPC standards related to PCB assembly and testing.
• Knowledge of data analysis and statistical methods for interpreting test results and identifying trends in PCB assembly defects.
• Excellent collaborative and communication skills to work effectively with SMT, Process, and Quality Engineering teams.
• Strong project management skills to lead test equipment implementation and improvement projects.
• Ability to analyze and interpret data from yield reports, equipment logs, product diagnostics, and test results to identify failure sources and yield loss.
• Proven ability to debug and troubleshoot product failures effectively.
• Proficiency in using data analytics techniques to identify patterns and root causes of failures.
• Experience in designing and executing experiments to investigate and resolve issues.
• Knowledge and experience in using TDR for failure analysis.
• Familiarity with and application of Six Sigma methodologies and tools for process improvement and problem-solving.
• Strong understanding and application of various failure analysis techniques.
• Excellent interpersonal and communication skills to effectively collaborate with cross-functional teams and provide feedback.
• Ability to drive failure troubleshooting and develop debug methodologies from the New Product Introduction (NPI) phase.
• Understanding of continuous yield improvement principles and the ability to drive initiatives.
• Ability to identify, introduce, and implement appropriate debug tools and capacity.
• Skill in analyzing failure opportunities and developing and implementing efficient test, debug, and component failure procedures.
• Ability to analyze test results and provide clear and actionable feedback to design and component engineers.
• Ability to evaluate and integrate new test/debug technologies. Understanding of and contribution to productivity improvement initiatives.
• Ability to provide effective solution support to test engineers.
• Typical Experience.
• Minimum of 3 years of progressive experience in test engineering from electronics manufacturing or a closely related industry.
• Demonstrated success in independently managing and improving test processes for complex data center systems.
• Proven track record of developing and implementing effective system-level test strategies and automation frameworks.
• Extensive experience in troubleshooting complex hardware and software integration issues during system testing.
• Significant experience in analyzing test data to identify performance bottlenecks and potential reliability concerns in electronics industry.
• Experience in integrating test processes with manufacturing execution or tracking systems.
• Strong history of collaboration with hardware and software development teams to ensure product quality.
• Experience in defining test requirements and working with vendors for specialized test equipment.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Instrument

ประเภทงาน:

งานประจำ

• To interface with customer on their Quality, Product and process requirement.
• To assist CQE manager to finalist with customer on Quality, Product and Process requirement in the factory after consultation with respective Product Core Teams and Factory Management.
• To provide customer with effective corrective, preventive actions on quality problems & issues.
• To act as instrument to oversee engineering changes and off spec authorizations for customer.
• To ensure product certification requirements of customers are met in the factory.
• To review, compile and submit First Article report (from NPI group ) to customer.
• To fulfills customer's quality reporting requirements.
• To assist CQE manager with all the data information in CI program.
• Design the Process Flow and Management Plan (PMP) to meet customer requirements.
• Review and understand workmanship std. Criteria, customer requirements or IPC-A-610.
• Monitoring In-process control per engineering specification and stop production when process out of control.
• Work with process engineer to conduct root cause analysis when discrepancy was observed in production line.
• Review daily and weekly quality report i.e Post-reflow inspection yield, In-circuit test,Functional test and Out-going report.
• Follow-up the corrective action ensure effectiveness of action plan.
• Create and revise the Quality checklist for Qality inspection at In-process and Out-going.
• Invole failure analysis of customer return board or unit.
• Organize material purge notice make sure non - conforming material not use inproduction.
• Invole product first article run with New Product Introduction (NPI) team.
• Conduct monthly base-line audit per Base-line audit procedure.
• Conduct process line buy-off before production.
• Conduct Gauge Capability study (GR&R) for critical equipments (if required).
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.
• Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

3 ปีขึ้นไป

ทักษะ:

Electronics, English

ประเภทงาน:

งานประจำ

• Under supervision and with minimal assistance define, specify, qualify, install, support and optimize test process and test equipment solutions for manufacturing.
• Lead test process optimization, with a focus on productivity improvements to cycle time and yield for a specific set of equipment within an Operations value stream.
• Debug of test process and equipment solutions using design of experiments, tools, and failure analysis methodologies.
• Collaborate with Quality, Process and Equipment engineers to detect and solve product and test yield and performance issues.
• Develop improvement roadmaps for test coverage, diagnosability, reparability, test time reductions and OEE.
• Analyze and interpret data and information from yield reports and equipment logs and product diagnostics to determine sources of yield loss.
• Provide solution support to process engineers to improve detection of known defect types as part of a Process Control plan.
• Support development of test equipment integration into Manufacturing Execution Systems including yield, tester log and product parametric information.
• Knowledge/Skills/Competencies.
• Interpreting test requirements and documenting test procedures.
• Analyzing data to drive coverage enhancement and first pass yield improvement.
• Good command of Thai & English speaking.
• Leadership and interpersonal skills.
• Typical Experience.
• Minimum 4 years of working experience in ICT Test Development in Electronics industry.
• Experience in large-scale In-circuit MFG ICT test development.
• Typical Education.
• Degree or higher in Telecommunication Engineering or Electronics Engineering.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

ประสบการณ์:

7 ปีขึ้นไป

ทักษะ:

Human Resource Management, Legal, Compliance

ประเภทงาน:

งานประจำ

• Responsible for human resource management issues within a site. In unionized sites this includes overall union-management relations, and negotiating and implementing local agreements and may serve as bargaining agent.
• Provides advice, counsel, direction and training to the management team and managers on any business issue that has employee or organizational impact on company personnel practices, procedures, and initiatives, including interpreting the intent and meaning of the contractual obligations with the Union.
• Prepares the companys position to present to the companys attorneys for arbitration and/or affirmative action cases.
• Ensures consistent application of policies and procedures for recruiting, rewarding, retaining, recognizing and developing people within a site.
• Provides employee relations consultation services to General Manager, management and employees.
• Develops, recommends, implements and maintains performance management programs and ensures consistent and timely application.
• Provides coaching and makes recommendations to managers/supervisors for performance development and corrective action.
• Conducts internal investigations of acts of employee misconduct including interviewing, gathering evidence, consulting legal council, making recommendations and documenting findings.
• Represents site in charges of violating regulation or law.
• Provides performance program reporting. Partners with site senior management team to implement organizational change interventions e.g., restructuring, reengineering, automating.
• Conducts ongoing skill competencies, knowledge and talent needs assessment.
• Develops or obtains specific training programs designed to meet the site's needs. Implements and directs staffing strategies which ensure attracting and retaining high caliber talent within and outside the site.
• Manages the rollout of Corporate Human Resources Programs at the site level e.g. Compensation and Benefits policies, guidelines, and programs; PDP, CTI, Employee Survey rollout program, Talent Management, Values Awareness programs.
• Ensures compliance to corporate policies, governmental regulations and laws.
• Keeps abreast of legislative decisions, changes in federal, state and local employment laws and regulations to limit legal exposure and liability.
• Knowledge/Skills/Competencies.
• In-depth knowledge of government regulations.
• Extensive knowledge of labor laws and experience in Labor Relations.
• Customer Satisfaction initiatives.
• Solid understanding of World Class Manufacturing processes and Six Sigma strategies.
• Experience with HRIS system.
• Ability to effectively communicate with a wide variety of internal customers.
• Ability to evaluate multiple highly detailed tasks, determine priorities and organize work in a manner that allows for timely completion of projects.
• Ability to manage sensitive employee information in a confidential manner.
• Knowledge of computer applications and the ability to accurately perform tasks in some or all of the following applications: Access, Excel, Word, PowerPoint, Microsoft Project, and Visio.
• Ability to effectively organize and motivate team members with a diverse group of skill sets.
• Typical Experience.
• Five to seven years of relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

5 ปีขึ้นไป

ทักษะ:

Procurement, Mechanical Engineering, English

ประเภทงาน:

งานประจำ

• Perform reliability testing. Write test reports and provide analysis of the test data,.
• prepare documentation and recommendations..
• Familiar with test equipment such as HALT and Environmental chambers, Power.
• supplies, DMMs, Data loggers, ThermocouplesIR cameras, Oscilloscopes etc..
• Lead meetings with customers to update the Reliability activities status.
• Work with the cross-functional team to ensure the products can meet the design specification and reliability goals..
• Conduct failure analysis (FA). Ensure that the Reliability issues have been resolved in the prompt and timely manner..
• Direct and coordinate engineering activities concerned with development, procurement, Installation, maintenance and calibration of instruments, equipment, and control devices required to test, record, and reduce test data..
• May provide training in new procedures to testing staff or technicians..
• Perform moderately complex assignments of the engineering test function.
• Knowledge/Skills/Competencies.
• Ability to read schematics..
• Knowledge of product and component failure modes and mechanisms..
• Effective communication skills and can do attitude..
• Good verbal and written communication skills in English.
• Typical Experience.
• Minimum 5 years working experience in hands-on testing of electronic products (Communication, Enterprise products, etc.).
• Typical Education.
• BS in Electrical or Mechanical engineering or related field.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Compliance

ประเภทงาน:

งานประจำ

• Lead the team to handle all quality excursions independently, and take effective actions on time.
• Oversee the product & material quality from NPI to mass production.
• Develop the quality control plan for respective area (material/process/product).
• Monitor and report quality KPI for internal (factory) and external (customer).
• Drive continuous improvement to benefit customer, CLS and supplier.
• Develop and maintain internal quality system, procedures, work instructions and workmanship standards.
• Lead process/product/system/supplier audit and improvement actions follow up.Industry standards (e.g. ISO).
• Compliance audit.
• Safety audit etc.
• Follow up the EC(Engineering Change), SPCN(Supplier Process Change Notification) to ensure the implementation of changes is timely and accurate (initiated both externally and internally).
• Coach junior quality staff to improve their quality knowledge.
• Accomplish the jobs assignment from the superior and participate in the quality strategy deployment.
• Knowledge/Skills/Competencies.
• Strong knowledge of quality tools, ISO and IPC standards and processes.
• Knowledge of software and its uses in generating reports capturing data presenting data in an understandable format.
• Strong knowledge of product and manufacturing processes.
• Knowledge and understanding of the business unit and how decisions impact customer satisfaction product quality,on-time delivery and profitability of the unit.
• Knowledge of quality tools such as FMEA, PMP, SPC, 8D methodology, etc.
• Knowledge of Six sigma and Lean Kaizen.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Typical Experience.
• 4 to 6 years in a similar role or industry.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experiency.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Problem Solving

ประเภทงาน:

งานประจำ

• Organizes and oversees the on-the-job process training program which includes developing the trainer certification procedures, process training methodology, a policy to govern the program, a continuous improvement plan, and tools to enable trainer/training supervision.
• Trainer certification includes both classroom and on-the-job components.
• Develops the "train-the-trainer" class and teaches critical pieces of it, develops trainer certification process and evaluation tools, coordinates operator training wit ...
• Consults with operators, trainers, engineers, managers to identify and address technical and process performance deficiencies.
• Investigates process/performance problems.
• Helps define performance requirements, formulates recommendations, designs the learning component of solution, initiates appropriate actions, and evaluates results.
• Creates or promotes opportunities for Celestica operators with area educational institutions (e.g. community colleges, technical training institutes).
• Forms and maintains partnerships with area community colleges and technical training institutes and collaborates on creating/adapting curriculum.
• Knowledge/Skills/Competencies.
• In-depth knowledge of technologies, including: through-hole, surface mount, surface mount fine/extra fine pitch, and associated modification and repair techniques.
• IPC Class A Instructor Certification.
• Very strong presentation, teaching and coaching skills.
• In-depth knowledge and understanding of documentation processes & quality systems.
• Strong understanding of ISO standards.
• Excellent analytical and problem solving skills.
• Ability to effectively communicate with a wide variety of internal and external customers or suppliers.
• Proficient in computer applications including Windows NT, Lotus Notes, MS Office Suite, and Documentation control systems.
• Ability to communicate effectively, both verbally and in writing, to a diverse group of internal and external customers and suppliers.
• Ability to communicate effectively, both in one-to-one and group situations.
• Typical Experience.
• Three to six years of relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ประสบการณ์:

6 ปีขึ้นไป

ทักษะ:

Automation, Assembly

ประเภทงาน:

งานประจำ

• Initiate the development and implementation of off the shelf standard solutions and/or new standard automation solutions to support customer product road map using Celestica Automation E2E process and tools such as Business Case, Design for Automation Assembly (DFAA) and smart sheet Project Planning.
• Initiate the hardware and software improvements of automated lines and off the shelf equipment, via the analysis of Overall Equipment Efficiency (OEE) and other available data.
• Lead the collaboration and the communication with multiple internal and external stakeholders including solution providers for design approval.
• Point of escalation for complex technical problems.
• Be accountable for the installation, qualification, maintenance and operational performance of complex equipment within a value stream or overall responsibility for common equipment sets across the entire factory.
• Support capital planning processes with the leadership team, develop forecasts for equipment capacity and recommend CapEx plans to meet site targets.
• Set yearly plans and goals for the department and give direction on expected performance and provide regular performance evaluations and ongoing feedback. Accountable for all department objectives and achieving agreed targets for key performance indicators.
• Knowledge/Skills/Competencies.
• Refer to technical skills below.
• Typical Experience.
• 4 to 6 years in a similar role or industry.
• Typical Education.
• Bachelor degree or consideration of an equivalent combination of education and experience.
• Educational Requirements may vary by Geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

ทักษะ:

Industry trends, Project Management, Excel

ประเภทงาน:

งานประจำ

• Manages engineering projects for development and production.
• Responsibilities include providing project definition and metrics, resource allocation, budget development and management, schedule management, task prioritization, contingency planning, project and program review.
• Communicates progress and results to senior management and customers.
• Works with Corporate and other Technical Managers to develop and maintain a process for determining which projects to staff based on customer demands and industry trends.
• Manages equipment selection, chemical computability, Design For Manufacture, process transfers, and qualification and reliability methodologies.
• Duties may be performed at the on-site at a customers location.
• Develops solutions based upon existing knowledge, and leveraging industry and other sites capabilities.
• Responsible for coordinating activities with customer and other sites to ensure maximization of resources and efficiencies across the NPI process.
• Responsible for overall management and success of the NPI function and its ability to transition and support products and processes to manufacturing.
• Project management and coordination of activities of a technical nature involving the analysis and modification of manufacturing methods to improve cost of manufacturing or support services, mfg.
• Processes, efficiencies, technical capabilities, engineering support, or for unique customer requirements.
• Project management may take place within the entire department, a sub-team within the department, across a Business Unit, etc.
• Knowledge/Skills/Competencies.
• Engineering Foundation Competencies.
• Understanding of competitor's pricing models.
• Knowledge of competitive benchmarks for pricing of specific product types.
• Knowledge of mechanical parts manufacturing processes.
• In-depth knowledge and understanding of manufacturing processes and equipment.
• In-depth knowledge of quality improvement practices and techniques.
• Ability to plan for and coordinate a wide variety of resources to meet production quality and quantity metrics.
• Ability to effectively communicate with a wide variety of internal and external customers.
• Ability to effectively lead, manage, train, coach and motivate a diverse group of employees to achieve high production levels within tight time deadlines and in a highly dynamic manufacturing environment.
• Ability to use some or all of the following PC applications: Word, Lotus Notes, Excel, Powerpoint.
• Excellent negotiation, problem resolution and project management skills.
• Ability to plan strategically for the coordinated delivery of a variety of materials.
• Strong analytical and statistical skills.
• Typical Experience.
• Nine plus years of relevant experience.
• Typical Education.
• Bachelor's degree in related field, or consideration of an equivalent combination of education and experience. Advanced studies in Business/Operations/Technology are recommended.
• Educational requirements may vary by geography.
• Notes.
• This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time.
• Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).
• At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.
• Celestica (NYSE, TSX: CLS) enables the world s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.
• Celestica would like to thank all applicants, however, only qualified applicants will be contacted.
• Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.